Likely fix#6723.
This is what happens AFAIK: we enter the main loop where we expire stuff
until a given percentage of keys is still found to be logically expired.
There are however other potential exit conditions.
However the "sampled" variable is not always incremented inside the
loop, because we may found no valid slot as we scan the hash table, but
just NULLs ad dict entries. So when the do/while loop condition is
triggered at the end, we do (expired*100/sampled), dividing by zero if
we sampled 0 keys.
Funcion adjustOpenFilesLimit() has an implicit parameter, which is server.maxclients.
This function aims to ajust maximum file descriptor number according to server.maxclients
by best effort, which is "bestlimit" could be lower than "maxfiles" but greater than "oldlimit".
When we try to increase "maxclients" using CONFIG SET command, we could increase maximum
file descriptor number to a bigger value without calling aeResizeSetSize the same time.
When later more and more clients connect to server, the allocated fd could be bigger and bigger,
and eventually exceeds events size of aeEventLoop.events. When new nodes joins the cluster,
new link is created, together with new fd, but when calling aeCreateFileEvent, we did not
check the return value. In this case, we have a non-null "link" but the associated fd is not
registered.
So when we dynamically set "maxclients" we could reach an inconsistency between maximum file
descriptor number of the process and server.maxclients. And later could cause cluster link and link
fd inconsistency.
While setting "maxclients" dynamically, we consider it as failed when resulting "maxclients" is not
the same as expected. We try to restore back the maximum file descriptor number when we failed to set
"maxclients" to the specified value, so that server.maxclients could act as a guard as before.
If a blocked module client times-out (or disconnects, unblocked
by CLIENT command, etc.) we need to call moduleUnblockClient
in order to free memory allocated by the module sub-system
and blocked-client private data
Other changes:
Made blockedonkeys.tcl tests a bit more aggressive in order
to smoke-out potential memory leaks
This commit solves the following bug:
127.0.0.1:6379> XGROUP CREATE x grp $ MKSTREAM
OK
127.0.0.1:6379> XADD x 666 f v
"666-0"
127.0.0.1:6379> XREADGROUP GROUP grp Alice BLOCK 0 STREAMS x >
1) 1) "x"
2) 1) 1) "666-0"
2) 1) "f"
2) "v"
127.0.0.1:6379> XADD x 667 f v
"667-0"
127.0.0.1:6379> XDEL x 667
(integer) 1
127.0.0.1:6379> XREADGROUP GROUP grp Alice BLOCK 0 STREAMS x >
1) 1) "x"
2) (empty array)
The root cause is that we use s->last_id in streamCompareID
while we should use the last *valid* ID
This bug is from the first version of Redis. Probably the problem here
is that before we used an SDS split function that created empty strings
for additional spaces, like in "SET foo bar".
AFAIK later we replaced it with the curretn sdssplitarg() API that has
no such a problem. As a result, we introduced a bug, where it is no
longer possible to do something like:
SET foo ""
Using the inline protocol. Now it is fixed.
- make lua-replicate-commands mutable (it never was, but i don't see why)
- make tcp-backlog immutable (fix a recent refactory mistake)
- increase the max limit of a few configs to match what they were before
the recent refactory
This commit solves several edge cases that are related to
exhausting the streamID limits: We should correctly calculate
the succeeding streamID instead of blindly incrementing 'seq'
This affects both XREAD and XADD.
Other (unrelated) changes:
Reply with a better error message when trying to add an entry
to a stream that has exhausted last_id
"Partial Resynchronization" is a special variant of replication success
that we have to tell systemd about if it is managing redis-server via a
Type=Notify service unit.
With the previous API, a NULL return value was ambiguous and could
represent either an old value of NULL or an error condition. The new API
returns a status code and allows the old value to be returned
by-reference.
This commit also includes test coverage based on
tests/modules/datatype.c which did not exist at the time of the original
commit.
since the refactory of config.c, it was initialized from config_hz in initServer
but apparently that's too late since the config file loading creates objects
which call LRU_CLOCK
This is useful to tell redis and modules to try to avoid doing things that may
increment the replication offset, and should be used when draining a master
and waiting for replicas to be in perfect sync before a failover.
This message is there for ten years, but is hardly useful.
Moreover it is likely that it will fill an entire disk if log ratation
is not configured, for no good reasons.
the code in:
c->flags &= ~(CLIENT_TRACKING|CLIENT_TRACKING_BROKEN_REDIR);
will do sign extension and turn on all the high 31 bits
no damage so far since we don't have any yet
+ memcpy(&id,ri.key,sizeof(id));
The memcpy from the key to the id reliease on the fact that this key
*should* be 8 bytes long as it was entered as such a few lines up the
code.
BUT if someone will change the code to the point this is no longer true,
current code can trash the stack which makes debugging very hard
while this fix will result in some garbage id, or even page fault.
Both are preferable to stack mangaling.
Changes in behavior:
- Change server.stream_node_max_entries from int64_t to long long, so that it can be used by the generic infra
- standard error reply instead of "repl-backlog-size must be 1 or greater" and such
- tls-port and a few TLS booleans were readable (config get) even when USE_OPENSSL was off (now they aren't)
- syslog-enabled, syslog-ident, cluster-enabled, appendfilename, and supervised didn't have a get (now they do)
- pidfile was initialized to NULL in InitServerConfig but had CONFIG_DEFAULT_PID_FILE in rewriteConfig (so the real default was "", but rewrite would cause it to be set), fixed the rewrite.
- TLS config in server.h was uninitialized (if no tls config args were provided)
Adding test for sanity and coverage
- Adding is_valid_fn and update_fn, both return 1 for success and 0 for failure with an optional error message.
- Bugfix in handling boundary check of unsigned numeric types (was boundaries as signed)
- Adding more numeric types to generic mechanism: uint, ulonglong, long, time_t, off_t
- More verbose error replies ("argument must be between" in out of range CONFIG SET (like config file parsing)
- add capability for each config to have a callback to check if value is valid and return error string
will enable converting many of the remaining custom configs into generic ones (reducing the x4 repetition for set,get,config,rewrite)
- add capability for each config to to run some update code after config is changed (only for CONFIG SET)
will also enable converting many of the remaining custom configs into generic ones
- add capability to move default values from server.h and server.c to config.c
will reduce many excess lines in server.h and server.c (plus, no need to rebuild the entire code base when a default change 8-))
other behavior changes:
- fix bug in bool config get (always returning 'yes')
- fix a bug in modifying jemalloc-bg-thread at runtime (didn't call set_jemalloc_bg_thread, due to bad merge conflict resolution (my fault))
- side effect when a failed attempt to enable activedefrag at runtime, we now respond with -ERR and not with -DISABLED
Random command like SPOP with count is replicated as
some SREM operations, and store them in also_propagate
array to propagate after the call, but this would break
atomicity.
To keep the command's atomicity, wrap also_propagate
array with MULTI/EXEC.
To avoid nested MULTI/EXEC, we check the lua_caller's flag,
if we are in the MULTI context we flag the lua_client as
CLIENT_MULTI, but it's not enough we shoud flag lua_client
as CLIENT_MULTI after redis.replicate_commands() immediately
or the first write command after redis.replicate_commands()
cannot know it's in an transaction, I know the missing CLIENT_MULTI
doesn't have any effect now, but it's a real bug and we should fix
it, in case someday we allow some dangerous command like BLPOP.
Is it sufficient... ? -- Yes it is. In standalone mode, we say READY=1
at the comment point; however in replicated mode, we delay sending
READY=1 until the replication sync completes.
This adds Makefile/build-system support for USE_SYSTEMD=(yes|no|*). This
variable's value determines whether or not libsystemd will be linked at
build-time.
If USE_SYSTEMD is set to "yes", make will use PKG_CONFIG to check for
libsystemd's presence, and fail the build early if it isn't
installed/detected properly.
If USE_SYSTEM is set to "no", libsystemd will *not* be linked, even if
support for it is available on the system redis is being built on.
For any other value that USE_SYSTEM might assume (e.g. "auto"),
PKG_CONFIG will try to determine libsystemd's presence, and set up the
build process to link against it, if it was indicated as being
installed/available.
This approach has a number of repercussions of its own, most importantly
the following: If you build redis on a system that actually has systemd
support, but no libsystemd-dev package(s) installed, you'll end up
*without* support for systemd notification/status reporting support in
redis-server. This changes established runtime behaviour.
I'm not sure if the build system and/or the server binary should
indicate this. I'm also wondering if not actually having
systemd-notify-support, but requesting it via the server's config,
should result in a fatal error now.
Instead of replicating a subset of libsystemd's sd_notify(3) internally,
use the dynamic library provided by systemd to communicate with the
service manager.
When systemd supervision was auto-detected or configured, communicate
the actual server status (i.e. "Loading dataset", "Waiting for
master<->replica sync") to systemd, instead of declaring readiness right
after initializing the server process.
This is a light-weight replace function, useful for use cases such as
realloc()ing an existing value, etc. Using RM_ModuleTypeSetValue() in
such cases is wasteful and complex as it attempts to delete the old
value, call its destructor, etc.
Calling XADD with 0-0 or 0 would result in creating an
empty key and storing it in the database.
Even worse, because XADD will reply with error the action
will not be replicated, creating a master-replica
inconsistency
Reduce default minimum effort, so that when fragmentation is just detected,
the impact on the latency will be minor.
Reduce the default maximum effort, mainly to prevent a case were a sudden
massive deletions, won't trigger an aggressive defrag that will cause latency.
When activedefrag is disabled mid-run, reset the 'running' info field, and
clear the scan cursor, so that when it'll be re-enabled, a new fresh scan will
start.
Clearing the 'running' variable is important since lowering the defragger
tunables mid-scan won't help, the defragger only considers new threshold when
a new scan starts, and during a scan it can only become more aggressive,
(when more severe fragmentation is detected), it'll never go less aggressive.
So by temporarily disabling activedefrag, one can lower th the tunables.
Removing the experimantal warning.
- Adding RM_ScanKey
- Adding tests for RM_ScanKey
- Refactoring RM_Scan API
Changes in RM_Scan
- cleanup in docs and coding convention
- Moving out of experimantal Api
- Adding ctx to scan callback
- Dont use cursor of -1 as an indication of done (can be a valid cursor)
- Set errno when returning 0 for various reasons
- Rename Cursor to ScanCursor
- Test filters key that are not strings, and opens a key if NULL
The implementation expose the following new functions:
1. RedisModule_CursorCreate - allow to create a new cursor object for
keys scanning
2. RedisModule_CursorRestart - restart an existing cursor to restart the
scan
3. RedisModule_CursorDestroy - destroy an existing cursor
4. RedisModule_Scan - scan keys
The RedisModule_Scan function gets a cursor object, a callback and void*
(used as user private data).
The callback will be called for each key in the database proving the key
name and the value as RedisModuleKey.
- the API name was odd, separated to two apis one for LRU and one for LFU
- the LRU idle time was in 1 second resolution, which might be ok for RDB
and RESTORE, but i think modules may need higher resolution
- adding tests for LFU and for handling maxmemory policy mismatch
Fixes GitHub issue #6492
Added stream support in RM_KeyType and RM_ValueLength.
Also moduleDelKeyIfEmpty was updated, even though it has
no effect now (It will be relevant when stream type direct
API will be coded - i.e. RM_StreamAdd)
The exposed functions:
1. RedisModule_GetUsedMemoryPercentage - return the used memory
2. RedisModue_MallocSize - return for a given pointer, the amount of memory allocated for this pointer
One problem with the solution proposed so far in #6537 is that key
lookups outside a command execution via call(), still used a cached
time. The cached time needed to be refreshed in multiple places,
especially because of modules callbacks from timers, cluster bus, and
thread safe contexts, that may use RM_Open().
In order to avoid this problem, this commit introduces the ability to
detect if we are inside call(): this way we can use the reference fixed
time only when we are in the context of a command execution or Lua
script, but for the asynchronous lookups, we can still use mstime() to
get a fresh time reference.
After the thread in #6537 and thanks to the suggestions received, this
commit updates the original patch in order to:
1. Solve the problem of updating the time in multiple places by updating
it in call().
2. Avoid introducing a new field but use our cached time.
This required some minor refactoring to the function updating the time,
and the introduction of a new cached time in microseconds in order to
use less gettimeofday() calls.
Calling lookupKey*() many times to search a key in one command
may get different result.
That's because lookupKey*() calls expireIfNeeded(), and delete
the key when reach the expire time. So we can get an robj before
the expire time, but a NULL after the expire time.
The worst is that may lead to Redis crash, for example
`RPOPLPUSH foo foo` the first time we get a list form `foo` and
hold the pointer, but when we get `foo` again it's expired and
deleted. Now we hold a freed memory, when execute rpoplpushHandlePush()
redis crash.
To fix it, we can refactor the judgment about whether a key is expired,
using the same basetime `server.cmd_start_mstime` instead of calling
mstime() everytime.
Add two new functions that leverage the RedisModuleDataType mechanism
for RDB serialization/deserialization and make it possible to use it
to/from arbitrary strings:
* RM_SaveDataTypeToString()
* RM_LoadDataTypeFromString()
rename RM_ServerInfoGetFieldNumerical RM_ServerInfoGetFieldSigned
move string2ull to util.c
fix leak in RM_GetServerInfo when duplicate info fields exist
looks like each platform implements long double differently (different bit count)
so we can't save them as binary, and we also want to avoid creating a new RDB
format version, so we save these are hex strings using "%La".
This commit includes a change in the arguments of ld2string to support this.
as well as tests for coverage and short reads.
coded by @guybe7
- Add RM_GetServerInfo and friends
- Add auto memory for new opaque struct
- Add tests for new APIs
other minor fixes:
- add const in various char pointers
- requested_section in modulesCollectInfo was actually not sds but char*
- extract new string2d out of getDoubleFromObject for code reuse
Add module API for
See #6525, this likely creates a NULL deference if the client was
terminated by Redis between the creation of the blocked client and the
creation of the thread safe context.
Using the is_key_ready() callback plus the reply callback later, creates
different issues AFAIK:
1. More complex API.
2. We need to call the reply callback() ASAP if the is_key_ready()
interface returned success, however the internals do not work in that
way, so when the reply callback is called the setup could be different.
To fix that, there is to break the current design that handles the
unblocked clients asyncrhonously, and run the list ASAP.
* replication hooks: role change, master link status, replica online/offline
* persistence hooks: saving, loading, loading progress
* misc hooks: cron loop, shutdown, module loaded/unloaded
* change the way hooks test work, and add tests for all of the above
startLoading() now gets flag indicating what is loaded.
stopLoading() now gets an indication of success or failure.
adding startSaving() and stopSaving() with similar args and role.
Some commands would want to open a key without touching it's LRU/LFU
similarly to the OBJECT or DEBUG command do.
Other commands may want to implement logic similar to what RESTORE
does (and in the future MIGRATE) and get/set the LRU or LFU.
Adding a test for coverage for RM_Call in a new "misc" unit
to be used for various short simple tests
also solves compilation warnings in redismodule.h and fork.c
As we know if a module exports module-side data types,
unload it is not allowed. This rule is the same with
blocked clients in module, because we use background
threads to implement module blocked clients, and it's
not safe to unload a module if there are background
threads running. So it's necessary to check if any
blocked clients running in this module when unload it.
Moreover, after that we can ensure that if no modules,
then no module blocked clients even module unloaded.
So, we can call moduleHandleBlockedClients only when
we have installed modules.
Calling a module hook callback may result in callback operations in turn
triggering other events the module is subscribed too. We don't want to
trigger those, it's unsafe and quite confusing, and to do it correcly we
would need to maintain an event list: quite a more complex
implementation.
This is what happened:
1. Instance starts, is a slave in the cluster configuration, but
actually server.masterhost is not set, so technically the instance
is acting like a master.
2. loadDataFromDisk() calls replicationCacheMasterUsingMyself() even if
the instance is a master, in the case it is logically a slave and the
cluster is enabled. So now we have a cached master even if the instance
is practically configured as a master (from the POV of
server.masterhost value and so forth).
3. clusterCron() sees that the instance requires to replicate from its
master, because logically it is a slave, so it calls
replicationSetMaster() that will in turn call
replicationCacheMasterUsingMyself(): before this commit, this call would
overwrite the old cached master, creating a memory leak.
This adds support for explicit configuration of a CA certs directory (in
addition to the previously supported bundle file). For redis-cli, if no
explicit CA configuration is supplied the system-wide default
configuration will be adopted.
misc:
- handle SSL_has_pending by iterating though these in beforeSleep, and setting timeout of 0 to aeProcessEvents
- fix issue with epoll signaling EPOLLHUP and EPOLLERR only to the write handlers. (needed to detect the rdb pipe was closed)
- add key-load-delay config for testing
- trim connShutdown which is no longer needed
- rioFdsetWrite -> rioFdWrite - simplified since there's no longer need to write to multiple FDs
- don't detect rdb child exited (don't call wait3) until we detect the pipe is closed
- Cleanup bad optimization from rio.c, add another one
* Introduce a connection abstraction layer for all socket operations and
integrate it across the code base.
* Provide an optional TLS connections implementation based on OpenSSL.
* Pull a newer version of hiredis with TLS support.
* Tests, redis-cli updates for TLS support.
cluster.c - stack buffer memory alignment
The pointer 'buf' is cast to a more strictly aligned pointer type
evict.c - lazyfree_lazy_eviction, lazyfree_lazy_eviction always called
defrag.c - bug in dead code
server.c - casting was missing parenthesis
rax.c - indentation / newline suggested an 'else if' was intended
It seeems that since I added the creation of the jemalloc thread redis
sometimes fails to start with the following error:
Inconsistency detected by ld.so: dl-tls.c: 493: _dl_allocate_tls_init: Assertion `listp->slotinfo[cnt].gen <= GL(dl_tls_generation)' failed!
This seems to be due to a race bug in ld.so, in which TLS creation on the
thread, collide with dlopen.
Move the creation of BIO and jemalloc threads to after modules are loaded.
plus small bugfix when trying to disable the jemalloc thread at runtime
since the slowlog and other means that can help you detect the bad script
are only exposed after the script is done. it might be a good idea to at least
print the script name (sha) to the log when it timeouts.
The correct way to access the module about a given IO context is to
deference io->type->module, since io->ctx is only populated if the user
requests an explicit context from an IO object.
We don't want that the API could be used directly in an unsafe way,
without checking if there is an active child. Now the safety checks are
moved directly in the function performing the operations.
In theory currently there is only one active child, but the API may
change or for bugs in the implementation we may have several (it was
like that for years because of a bug). Better to wait for a specific
pid and avoid consuing other pending children information.
We can't expect SIGUSR1 to have any specific value range, so let's
define an exit code that we can handle in a special way.
This also fixes an #include <wait.h> that is not standard.
SipHash expects a 128-bit key, and we were indeed generating 128-bits,
but restricting them to hex characters 0-9a-f, effectively giving us
only 4 bits-per-byte of key material, and 64 bits overall.
Now, we skip the hex conversion and supply 128 bits of unfiltered
random data.
Here we introduce a change in the way we convert values from Lua to
Redis when RESP3 is selected: this is possible without breaking the fact
we can return directly what a command returned, because there is no
Redis command in RESP2 that returns true or false to Lua, so the
conversion in the case of RESP2 is totally arbitrary. When a script is
written selecting RESP3 from Lua, it totally makes sense to change such
behavior and return RESP3 true/false when Lua true/false is returned.
We want all the scripts to run in RESP2 mode by default. It's up to the
caller to switch to V3 using redis.setresp() if it is really needed.
This way most scripts written for past Redis versions will continue to
work with Redis >= 6 even if the client is in RESP3 mode.
Note that this breaks API compatibility with Redis < 6:
CONFIG GET requirepass
Will no longer return a cleartext password as well, but the SHA256 hash
of the password set.
When implementing the code that saves and loads these aux fields we used rdb
format that was added for that in redis 5.0, but then we added the 'when' field
which meant that the old redis-check-rdb won't be able to skip these.
this fix adds an opcode as if that 'when' is part of the module data.
Before this commit we may have not consumer buffers when a read error is
encountered. Such buffers may contain errors that are important clues
for the user: for instance a protocol error in the payload we send in
pipe mode will cause the server to abort the connection. If the user
does not get the protocol error, debugging what is happening can be a
nightmare.
This commit fixes issue #3756.
of aarch64.
The content comes from the definition of the sigcontext and tested on
my aarch64 server.
sigcontext defined at the linux kernel code:
arch/arm64/include/uapi/asm/sigcontext.h
