This works because this struct is never referenced by its name,
but always by its type.
This prevents a conflict with struct user from <sys/user.h>
when compiling against uclibc.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
* fix memlry leaks with diskless replica short read.
* fix a few timing issues with valgrind runs
* fix issue with valgrind and watchdog schedule signal
about the valgrind WD issue:
the stack trace test in logging.tcl, has issues with valgrind:
==28808== Can't extend stack to 0x1ffeffdb38 during signal delivery for thread 1:
==28808== too small or bad protection modes
it seems to be some valgrind bug with SA_ONSTACK.
SA_ONSTACK seems unneeded since WD is not recursive (SA_NODEFER was removed),
also, not sure if it's even valid without a call to sigaltstack()
Currently, there are several types of threads/child processes of a
redis server. Sometimes we need deeply optimise the performance of
redis, so we would like to isolate threads/processes.
There were some discussion about cpu affinity cases in the issue:
https://github.com/antirez/redis/issues/2863
So implement cpu affinity setting by redis.conf in this patch, then
we can config server_cpulist/bio_cpulist/aof_rewrite_cpulist/
bgsave_cpulist by cpu list.
Examples of cpulist in redis.conf:
server_cpulist 0-7:2 means cpu affinity 0,2,4,6
bio_cpulist 1,3 means cpu affinity 1,3
aof_rewrite_cpulist 8-11 means cpu affinity 8,9,10,11
bgsave_cpulist 1,10-11 means cpu affinity 1,10,11
Test on linux/freebsd, both work fine.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
When deffered reply is added the previous reply node cannot be used so
all the extra space we allocated in it is wasted. in case someone uses
deffered replies in a loop, each time adding a small reply, each of
these reply nodes (the small string reply) would have consumed a 16k
block.
now when we add anther diferred reply node, we trim the unused portion
of the previous reply block.
see #7123
cherry picked from commit fb732f7a94
with fix to handle a crash with LIBC allocator, which apparently can
return the same pointer despite changing it's size.
i.e. shrinking an allocation of 16k into 56 bytes without changing the
pointer.
We could use uint64_t specific macros, but after all it's simpler to
just use an obvious equivalent type plus casting: this will be a no op
and is simpler than fixed size types printf macros.
1. add eviction-lazyfree monitor
2. put eviction-del & eviction-lazyfree into eviction-cycle
that means eviction-cycle contains all the latency in
the eviction cycle including del and lazyfree
3. use getMaxmemoryState to check if we can break in lazyfree-evict
If client gets blocked again in `processUnblockedClients`, redis will not send
`REPLCONF GETACK *` to slaves untill next eventloop, so the client will be
blocked for 100ms by default(10hz) if no other file event fired.
move server.get_ack_from_slaves sinppet after `processUnblockedClients`, so
that both the first WAIT command that puts client in blocked context and the
following WAIT command processed in processUnblockedClients would trigger
redis-sever to send `REPLCONF GETACK *`, so that the eventloop would get
`REPLCONG ACK <reploffset>` from slaves and unblocked ASAP.
come to think of it, in theory (not in practice), getDecodedObject can
return the same original object with refcount incremented, so the
pointer comparision in the previous commit was invalid.
so now instead of checking the encoding, we explicitly check the
refcount.
since the recent addition of OBJ_STATIC_REFCOUNT and the assertion in
incrRefCount it is now impossible to use dictFind using a static robj,
because dictEncObjKeyCompare will call getDecodedObject which tries to
increment the refcount just in order to decrement it later.
Now both master and replicas keep track of the last replication offset
that contains meaningful data (ignoring the tailing pings), and both
trim that tail from the replication backlog, and the offset with which
they try to use for psync.
the implication is that if someone missed some pings, or even have
excessive pings that the promoted replica has, it'll still be able to
psync (avoid full sync).
the downside (which was already committed) is that replicas running old
code may fail to psync, since the promoted replica trims pings form it's
backlog.
This commit adds a test that reproduces several cases of promotions and
demotions with stale and non-stale pings
Background:
The mearningful offset on the master was added recently to solve a problem were
the master is left all alone, injecting PINGs into it's backlog when no one is
listening and then gets demoted and tries to replicate from a replica that didn't
have any of the PINGs (or at least not the last ones).
however, consider this case:
master A has two replicas (B and C) replicating directly from it.
there's no traffic at all, and also no network issues, just many pings in the
tail of the backlog. now B gets promoted, A becomes a replica of B, and C
remains a replica of A. when A gets demoted, it trims the pings from its
backlog, and successfully replicate from B. however, C is still aware of
these PINGs, when it'll disconnect and re-connect to A, it'll ask for something
that's not in the backlog anymore (since A trimmed the tail of it's backlog),
and be forced to do a full sync (something it didn't have to do before the
meaningful offset fix).
Besides that, the psync2 test was always failing randomly here and there, it
turns out the reason were PINGs. Investigating it shows the following scenario:
cycle 1: redis #1 is master, and all the rest are direct replicas of #1
cycle 2: redis #2 is promoted to master, #1 is a replica of #2 and #3 is replica of #1
now we see that when #1 is demoted it prints:
17339:S 21 Apr 2020 11:16:38.523 * Using the meaningful offset 3929963 instead of 3929977 to exclude the final PINGs (14 bytes difference)
17339:S 21 Apr 2020 11:16:39.391 * Trying a partial resynchronization (request e2b3f8817735fdfe5fa4626766daa938b61419e5:3929964).
17339:S 21 Apr 2020 11:16:39.392 * Successful partial resynchronization with master.
and when #3 connects to the demoted #2, #2 says:
17339:S 21 Apr 2020 11:16:40.084 * Partial resynchronization not accepted: Requested offset for secondary ID was 3929978, but I can reply up to 3929964
so the issue here is that the meaningful offset feature saved the day for the
demoted master (since it needs to sync from a replica that didn't get the last
ping), but it didn't help one of the other replicas which did get the last ping.
STRALGO should be a container for mostly read-only string
algorithms in Redis. The algorithms should have two main
characteristics:
1. They should be non trivial to compute, and often not part of
programming language standard libraries.
2. They should be fast enough that it is a good idea to have optimized C
implementations.
Next thing I would love to see? A small strings compression algorithm.
When deffered reply is added the previous reply node cannot be used so
all the extra space we allocated in it is wasted. in case someone uses
deffered replies in a loop, each time adding a small reply, each of
these reply nodes (the small string reply) would have consumed a 16k
block.
now when we add anther diferred reply node, we trim the unused portion
of the previous reply block.
see #7123
After all I changed idea again: enabled/disabled should have a more
clear meaning, and it only means: you can't authenticate with such user
with new connections, however old connections continue to work as
expected.
Now that we have an interface to use this API directly, via ACL GENPASS,
we are no longer sure what people could do with it. So why don't make it
a strong primitive exported by Redis in order to create unique IDs and
so forth?
The implementation was tested against the test vectors that can
be found in RFC4231.
If redis crashes early, before lua is set up (like, if File Descriptor 0 is closed before exec), it will crash again trying to print memory statistics.
Strange enough, pthread_setname_np() produces a warning for not defined
function even if pthread is included. Moreover the MacOS documentation
claims the return value for the function is void, but actually is int.
Related to #7089.
when trigger a always fail scripts, sentinel.running_scripts will increase ten times, however it
only decrease one times onretry the maximum. and it will't reset, when it become
SENTINEL_SCRIPT_MAX_RUNNING, sentinel don't trigger scripts.
Streams items are similar to dictionaries, however they preserve both
the order, and allow for duplicated field names. So a map is not a
semantically sounding way to deal with this.
https://twitter.com/antirez/status/1248261087553880069
Reloading of the RDB generated by
DEBUG POPULATE 5000000
SAVE
is now 25% faster.
This commit also prepares the ability to have more flexibility when
loading stuff from the RDB, since we no longer use dbAdd() but can
control exactly how things are added in the database.
Related to #5145.
Design note: clients may change type when they turn into replicas or are
moved into the Pub/Sub category and so forth. Moreover the recomputation
of the bytes used is problematic for obvious reasons: it changes
continuously, so as a conservative way to avoid accumulating errors,
each client remembers the contribution it gave to the sum, and removes
it when it is freed or before updating it with the new memory usage.
Initially they needed to be at the end so that we could extend to N
strings in the future, but after further consideration I no longer
believe it's worth it.
Example: Client uses a pipe to send the following to a
stale replica:
MULTI
.. do something ...
DISCARD
The replica will reply the MUTLI with -MASTERDOWN and
execute the rest of the commands... A client using a
pipe might not be aware that MULTI failed until it's
too late.
I can't think of a reason why MULTI/EXEC/DISCARD should
not be executed on stale replicas...
Also, enable MULTI/EXEC/DISCARD during loading
By using a "circular BRPOPLPUSH"-like scenario it was
possible the get the same client on db->blocking_keys
twice (See comment in moduleTryServeClientBlockedOnKey)
The fix was actually already implememnted in
moduleTryServeClientBlockedOnKey but it had a bug:
the funxction should return 0 or 1 (not OK or ERR)
Other changes:
1. Added two commands to blockonkeys.c test module (To
reproduce the case described above)
2. Simplify blockonkeys.c in order to make testing easier
3. cast raxSize() to avoid warning with format spec
Makse sure call() doesn't wrap replicated commands with
a redundant MULTI/EXEC
Other, unrelated changes:
1. Formatting compiler warning in INFO CLIENTS
2. Use CLIENT_ID_AOF instead of UINT64_MAX
37a10cef introduced automatic wrapping of MULTI/EXEC for the
alsoPropagate API. However this collides with the built-in mechanism
already present in module.c. To avoid complex changes near Redis 6 GA
this commit introduces the ability to exclude call() MUTLI/EXEC wrapping
for also propagate in order to continue to use the old code paths in
module.c.
propagate_last_id is declared outside of the loop but used
only from within the loop. Once it's '1' it will never go
back to '0' and will replicate XSETID even for IDs that
don't actually change the last_id.
While not a serious bug (XSETID always used group->last_id
so there's no risk), it does causes redundant traffic
between master and its replicas
Now that this mechanism is the sole one used for blocked clients
timeouts, it is more wise to cleanup the table when the client unblocks
for any reason. We use a flag: CLIENT_IN_TO_TABLE, in order to avoid a
radix tree lookup when the client was already removed from the table
because we processed it by scanning the radix tree.
First, we must parse the IDs, so that we abort ASAP.
The return value of this command cannot be an error if
the client successfully acknowledged some messages,
so it should be executed in a "all or nothing" fashion.
the AOF will be loaded successfully, but the stream will be missing,
i.e inconsistencies with the original db.
this was because XADD with id of 0-0 would error.
add a test to reproduce.
A very commonly signaled operational problem with Redis master-replicas
sets is that, once the master becomes unavailable for some reason,
especially because of network problems, many times it wont be able to
perform a partial resynchronization with the new master, once it rejoins
the partition, for the following reason:
1. The master becomes isolated, however it keeps sending PINGs to the
replicas. Such PINGs will never be received since the link connection is
actually already severed.
2. On the other side, one of the replicas will turn into the new master,
setting its secondary replication ID offset to the one of the last
command received from the old master: this offset will not include the
PINGs sent by the master once the link was already disconnected.
3. When the master rejoins the partion and is turned into a replica, its
offset will be too advanced because of the PINGs, so a PSYNC will fail,
and a full synchronization will be required.
Related to issue #7002 and other discussion we had in the past around
this problem.
Redis refusing to run MULTI or EXEC during script timeout may cause partial
transactions to run.
1) if the client sends MULTI+commands+EXEC in pipeline without waiting for
response, but these arrive to the shards partially while there's a busy script,
and partially after it eventually finishes: we'll end up running only part of
the transaction (since multi was ignored, and exec would fail).
2) similar to the above if EXEC arrives during busy script, it'll be ignored and
the client state remains in a transaction.
the 3rd test which i added for a case where MULTI and EXEC are ok, and
only the body arrives during busy script was already handled correctly
since processCommand calls flagTransaction
