Adds: `L/RPOP <key> [count]`
Implements no. 2 of the following strategies:
1. Loop on listTypePop - this would result in multiple calls for memory freeing and allocating (see 769167a079)
2. Iterate the range to build the reply, then call quickListDelRange - this requires two iterations and **is the current choice**
3. Refactor quicklist to have a pop variant of quickListDelRange - probably optimal but more complex
Also:
* There's a historical check for NULL after calling listTypePop that was converted to an assert.
* This refactors common logic shared between LRANGE and the new form of LPOP/RPOP into addListRangeReply (adds test for b/w compat)
* Consequently, it may have made sense to have `LRANGE l -1 -2` and `LRANGE l 9 0` be legit and return a reverse reply. Due to historical reasons that would be, however, a breaking change.
* Added minimal comments to existing commands to adhere to the style, make core dev life easier and get commit karma, naturally.
The commit deals with the syncWithMaster and the ugly state machine in it.
It attempts to clean it a bit, but more importantly it uses pipeline for
part of the work (rather than 7 round trips, we now have 4).
i.e. the connect and PING are separate, then AUTH + 3 REPLCONF in one pipeline,
and finally the PSYNC (must be separate since the master has to have an empty
output buffer).
This is just a refactoring commit.
This function was never actually used as a synchronous (do both send or
receive), it was always used only ine one of the two modes, which meant it
has to take extra arguments that are not relevant for the other.
Besides that, a tool that sends a synchronous command, it not something
we want in our toolbox (synchronous IO in single threaded app is evil).
sendSynchronousCommand was now refactored into separate sending and
receiving APIs, and the sending part has two variants, one taking vaargs,
and the other taking argc+argv (and an optional length array which means
you can use binary sds strings).
Apparently the "leaks" took reports a different error string about process
that's not found in each version of MacOS.
This cause the test suite to fail on some OS versions, since some tests terminate
the process before looking for leaks.
Instead of looking at the error string, we now look at the (documented) exit code.
When a database on a 64 bit build grows past 2^31 keys, the underlying hash table expands to 2^32 buckets. After this point, the algorithms for selecting random elements only return elements from half of the available buckets because they use random() which has a range of 0 to 2^31 - 1. This causes problems for eviction policies which use dictGetSomeKeys or dictGetRandomKey. Over time they cause the hash table to become unbalanced because, while new keys are spread out evenly across all buckets, evictions come from only half of the available buckets. Eventually this half of the table starts to run out of keys and it takes longer and longer to find candidates for eviction. This continues until no more evictions can happen.
This solution addresses this by using a 64 bit PRNG instead of libc random().
Co-authored-by: Greg Femec <gfemec@google.com>
Turns out that when the fork child crashes, the crash log was deleting
the pidfile from the disk (although the parent is still running.
Now we set the pidfile of the fork process to NULL so the fork process
will never deletes it.
Normally IO threads should simply read data from the socket into the
buffer and attempt to parse it.
If a protocol error is detected, a reply is generated which may result
with installing a write handler which is not thread safe. This fix
delays that until the client is processed back in the main thread.
Fixes#8220
In the distant history there was only the read flag for commands, and whatever
command that didn't have the read flag was a write one.
Then we added the write flag, but some portions of the code still used !read
Also some commands that don't work on the keyspace at all, still have the read
flag.
Changes in this commit:
1. remove the read-only flag from TIME, ECHO, ROLE and LASTSAVE
2. EXEC command used to decides if it should propagate a MULTI by looking at
the command flags (!read & !admin).
When i was about to change it to look at the write flag instead, i realized
that this would cause it not to propagate a MULTI for PUBLISH, EVAL, and
SCRIPT, all 3 are not marked as either a read command or a write one (as
they should), but all 3 are calling forceCommandPropagation.
So instead of introducing a new flag to denote a command that "writes" but
not into the keyspace, and still needs propagation, i decided to rely on
the forceCommandPropagation, and just fix the code to propagate MULTI when
needed rather than depending on the command flags at all.
The implication of my change then is that now it won't decide to propagate
MULTI when it sees one of these: SELECT, PING, INFO, COMMAND, TIME and
other commands which are neither read nor write.
3. Changing getNodeByQuery and clusterRedirectBlockedClientIfNeeded in
cluster.c to look at !write rather than read flag.
This should have no implications, since these code paths are only reachable
for commands which access keys, and these are always marked as either read
or write.
This commit improve MULTI propagation tests, for modules and a bunch of
other special cases, all of which used to pass already before that commit.
the only one that test change that uncovered a change of behavior is the
one that DELs a non-existing key, it used to propagate an empty
multi-exec block, and no longer does.
In response to large client query buffer optimization introduced in 1898e6c. The calculation of the amount of
remaining bytes we need to write to the query buffer was calculated wrong, as a result we are unnecessarily
growing the client query buffer by sdslen(c->querybuf) always. This fix corrects that behavior.
Please note the previous behavior prior to the before-mentioned change was correctly calculating the remaining
additional bytes, and this change makes that calculate to be consistent.
Useful context, the argument of size `ll` starts at qb_pos (which is now the beginning of the sds), but much of it
may have already been read from the socket, so we only need to grow the sds for the remainder of it.
If we only has one node in cluster or before 8fdc857, we don't know myself ip, so we should use config.hostip for myself.
However, we should use the IP from the command response to update node->ip if it exists and is different from config.hostip
otherwise, when there's more than one node in cluster, if we use -h with virtual IP or DNS, benchmark doesn't show node real ip and port of myself even though it could get right IP and port by CLUSTER NODES command.
Fix wrong server dirty increment in
* spopWithCountCommand
* hsetCommand
* ltrimCommand
* pfaddCommand
Some didn't increment the amount of fields (just one per command).
Others had excessive increments.
Additionally the older defrag tests are using an obsolete way to check
if the defragger is suuported (the error no longer contains "DISABLED").
this doesn't usually makes a difference since these tests are completely
skipped if the allocator is not jemalloc, but that would fail if the
allocator is a jemalloc that doesn't support defrag.
Exposes the main thread CPU info via info modules ( linux specific only )
(used_cpu_sys_main_thread and used_cpu_user_main_thread). This is important for:
- distinguish between main thread and io-threads cpu time total cpu time consumed ( check
what is the first bottleneck on the used config )
- distinguish between main thread and modules threads total cpu time consumed
Apart from it, this commit also exposes the server_time_usec within the Server section so that we can
properly differentiate consecutive collection and calculate for example the CPU% and or / cpu time vs
wall time, etc...
* Allow runtest-moduleapi use a different 'make', for systems where GNU Make is 'gmake'.
* Fix issue with builds on Solaris re-building everything from scratch due to CFLAGS/LDFLAGS not stored.
* Fix compile failure on Solaris due to atomicvar and a bunch of warnings.
* Fix garbled log timestamps on Solaris.
When a replica uses the diskless-load swapdb approach, it backs up the old database,
then attempts to load a new one, and in case of failure, it restores the backup.
this means that modules with global out of keyspace data, must have an option to
subscribe to events and backup/restore/discard their global data too.
Add a new set of defrag functions that take a defrag context and allow
defragmenting memory blocks and RedisModuleStrings.
Modules can register a defrag callback which will be invoked when the
defrag process handles globals.
Modules with custom data types can also register a datatype-specific
defrag callback which is invoked for keys that require defragmentation.
The callback and associated functions support both one-step and
multi-step options, depending on the complexity of the key as exposed by
the free_effort callback.
The pid of the benchmark process is used to randomize the random number generator's
seed. This ensures that when multiple benchmark processes are started at the same time
to generate load on a server, they use different seeds. This will ensure randomness in
the keys generated by different benchmark processes.
Add commands to query geospatial data with bounding box.
Two new commands that replace the existing 4 GEORADIUS* commands.
GEOSEARCH key [FROMMEMBER member] [FROMLOC long lat] [BYRADIUS radius
unit] [BYBOX width height unit] [WITHCORD] [WITHDIST] [WITHASH] [COUNT
count] [ASC|DESC]
GEOSEARCHSTORE dest_key src_key [FROMMEMBER member] [FROMLOC long lat]
[BYRADIUS radius unit] [BYBOX width height unit] [WITHCORD] [WITHDIST]
[WITHASH] [COUNT count] [ASC|DESC] [STOREDIST]
- Add two types of CIRCULAR_TYPE and RECTANGLE_TYPE to achieve different searches
- Judge whether the point is within the rectangle, refer to:
geohashGetDistanceIfInRectangle
This adds a new `tls-client-cert-file` and `tls-client-key-file`
configuration directives which make it possible to use different
certificates for the TLS-server and TLS-client functions of Redis.
This is an optional directive. If it is not specified the `tls-cert-file`
and `tls-key-file` directives are used for TLS client functions as well.
Also, `utils/gen-test-certs.sh` now creates additional server-only and client-only certs and will skip intensive operations if target files already exist.
This adds a copy callback for module data types, in order to make
modules compatible with the new COPY command.
The callback is optional and COPY will fail for keys with data types
that do not implement it.
