Few config settings are also reflected by the INFO command.
these are mainly ones that are important for either an instant view of
the server status (to compare a metric to it's limit config),
Important configurations that are necessary in the crash log (which
currently doesn't print the config),
And things that are important for monitoring solutions (such as
Prometheus), which rely on INFO to collect their data.
Add cluster_connections to INFO CLUSTER:
This makes it possible to be combined together with connected_clients
and connected_slaves and be matched against maxclients
In redisFork(), we don't set child pid, so updateDictResizePolicy()
doesn't take effect, that isn't friendly for copy-on-write.
The bug was introduced this in redis 6.0: 56258c6
The reason that we want to get a full crash report on SIGABRT
is that the jmalloc, when detecting a corruption, calls abort().
This will cause the Redis to exist silently without any report
and without any way to analyze what happened.
The bug occurs when 'callback' re-registers itself to a point
in the future and the execution time in non-negligible:
'now' refers to time BEFORE callback was executed and is used
to calculate 'next_period'.
We must get the actual current time when calculating 'next_period'
Useful when you want to know through which bind address the client connected to
the server in case of multiple bind addresses.
- Adding `laddr` field to CLIENT list showing the local (bind) address.
- Adding `LADDR` option to CLIENT KILL to kill all the clients connected
to a specific local address.
- Refactoring to share code.
Background:
#3467 (redis 4.0.0), started ignoring ENOPROTOOPT, but did that only for
the default bind (in case bind config wasn't explicitly set).
#5598 (redis 5.0.3), added that for bind addresses explicitly set
(following bug reports in Debian for redis 4.0.9 and 5.0.1), it
also ignored a bunch of other errors like EPROTONOSUPPORT which was
requested in #3894, and also added EADDRNOTAVAIL (wasn't clear why).
This (ignoring EADDRNOTAVAIL) makes redis start successfully, even if a
certain network interface isn't up yet , in which case we rather redis
fail and will be re-tried when the NIC is up, see #7933.
However, it turns out that when IPv6 is disabled (supported but unused),
the error we're getting is EADDRNOTAVAIL. and in many systems the
default config file tries to bind to localhost for both v4 and v6 and
would like to silently ignore the error on v6 if disabled.
This means that we sometimes want to ignore EADDRNOTAVAIL and other times
we wanna fail.
So this commit changes these main things:
1. Ignore all the errors we ignore for both explicitly requested bind
address and a default implicit one.
2. Add a '-' prefix to allow EADDRNOTAVAIL be ignored (by default that's
different than the previous behavior).
3. Restructure that function in a more readable and maintainable way see
below.
4. Make the default behavior of listening to all achievable by setting
a bind config directive to * (previously only possible by omitting
it)
5. document everything.
The old structure of this function was that even if there are no bind
addresses requested, the loop that runs though the bind addresses runs
at least once anyway!
In that one iteration of the loop it binds to both v4 and v6 addresses,
handles errors for each of them separately, and then eventually at the
if-else chain, handles the error of the last bind attempt again!
This was very hard to read and very error prone to maintain, instead now
when the bind info is missing we create one with two entries, and run
the simple loop twice.
Turns out this was broken since version 4.0 when we added sds size
classes.
The cluster code uses sds for the receive buffer, and then casts it to a
struct and accesses a 64 bit variable.
This commit replaces the use of sds with a simple reallocated buffer.
In case redis starts and find that THP is enabled ("always"), instead
of printing a log message, which might go unnoticed, redis will try to
disable it (just for the redis process).
Note: it looks like on self-bulit kernels THP is likely be set to "always" by default.
Some discuss about THP side effect on Linux:
according to http://www.antirez.com/news/84, we can see that
redis latency spikes are caused by linux kernel THP feature.
I have tested on E3-2650 v3, and found that 2M huge page costs
about 0.25ms to fix COW page fault.
Add a new config 'disable-thp', the recommended setting is 'yes',
(default) the redis tries to disable THP by prctl syscall. But
users who really want THP can set it to "no"
Thanks to Oran & Yossi for suggestions.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
This commit deals with manual failover as well as non-manual failover.
We did tests with manual failover as follows:
1, Setup redis cluster which holds 16 partions, each having only
1 corresponding replica.
2, Write a batch of data to redis cluster and make sure the redis is doing
a active expire in serverCron.
3, Do a manual failover sequentially to each partions with a time interval
of 3 minutes.
4, Collect logs and do some computaiton work.
The result:
case avgTime maxTime minTime
C1 95.8ms 227ms 25ms
C2 47.9ms 96ms 12ms
C3 12.6ms 27ms 7ms
Explanation
case C1: All nodes use the version before optimization
case C2: Masters use the elder version while replicas use the optimized version
case C3: All nodes use the optimized version
failover time: The time between when replica got a `manual failover request` and
when it `won the failover election`.
avgTime: average failover time
maxTime: maximum failover time
minTime: mimimum failover time
ms: millisecond
Co-authored-by: chendq8 <c.d_q@163.com>
When using a system with no malloc_usable_size(), zmalloc_size() assumed
that the heap allocator always returns blocks that are long-padded.
This may not always be the case, and will result with zmalloc_size()
returning a size that is bigger than allocated. At least in one case
this leads to out of bound write, process crash and a potential security
vulnerability.
Effectively this does not affect the vast majority of users, who use
jemalloc or glibc.
This problem along with a (different) fix was reported by Drew DeVault.
- add test suite coverage for redis-benchmark
- add --version (similar to what redis-cli has)
- fix bug sending more requests than intended when pipeline > 1.
- when done sending requests, avoid freeing client in the write handler, in theory before
responses are received (probably dead code since the read handler will call clientDone first)
Co-authored-by: Oran Agra <oran@redislabs.com>
`info Persistence` will include correct (updated) rdb_last_bgsave_time_sec
For diskless bgsave (sockets) too (like a few other persistence info fields).
Refactor code to reduce duplicate code.
Previous code would have added default redis save parameters
to the config file on rewrite, which would have been silently ignored
when the config file is loaded.
The new code avoids adding this, and also actively removes these lines
If added by a previous config rewrite.
This wrong behavior was backed by a test, and also documentation, and dates back to 2010.
But it makes no sense to anyone involved so it was decided to change that.
Note that 20eeddf (invalidate watch on expire on access) was released in 6.0 RC2
and 2d1968f released in in 6.0.0 GA (invalidate watch when key is evicted).
both of which do similar changes.
Adding the ":{tag}" only if --cluster is used, so that when used against
a proxy it generates traffic to all shards.
Co-authored-by: Oran Agra <oran@redislabs.com>
minor fix for a bug which happen on error handling code
and doesn't look like it could have caused any real harm
(fd number wouldn't have been reused yet)
This commit implements ACL for Sentinel mode, main work of this PR includes:
- Update Sentinel command table in order to better support ACLs.
- Fix couple of things which currently blocks the support for ACL on sentinel mode.
- Provide "sentinel sentinel-user" and "sentinel sentinel-pass " configuration in order to let sentinel authenticate with a specific user in other sentinels.
- requirepass is kept just for compatibility with old config files
Co-authored-by: Oran Agra <oran@redislabs.com>
In some cases one command added a very big bulk of memory, and this
would be "resolved" by the eviction before the next command.
Seeing an unexplained mass eviction we would wish to
know the highest momentary usage too.
Tracking it in call() and beforeSleep() adds some hooks in AOF and RDB
loading.
The fix in clientsCronTrackExpansiveClients is related to #7874
introduces a NOMKSTREAM option for xadd command, this would be useful for some
use cases when we do not want to create new stream by default:
XADD key [MAXLEN [~|=] <count>] [NOMKSTREAM] <ID or *> [field value] [field value]
Reference the correct "case", case 4, in the comment explaining the need
for case 3, when the number of request items is too close to the
cardinality of the set. Case 4 is indeed the "natural approach"
referenced earlier in that sentence.
This is a compatibility issue with redis 5.0 that was introduced by ACL.
Before this commit, setting requirepass to an empty string will result
in a server that needs an empty AUTH, unlike redis 5.0 which would
accept connections without an AUTH.
If 'delta' is negative 'mem_freed' may underflow and cause
the while loop to exit prematurely (And not evicting enough
memory)
mem_freed can be negative when:
1. We use lazy free (consuming memory by appending to a list)
2. Thread doing an allocation between the two calls to zmalloc_used_memory.
If we fail or stop to rewrite aof, we need to remove temporary aof.
We also remove temporary rdb when replicas abort to receive rdb.
But currently we delete them in main thread, to avoid blocking,
we should use bg_unlink to remove them in a background thread.
Btw, we have already used this way to removed child process temporary rdb.
- Clarify some documentation comments
- Make sure blocked-on-keys client privdata is accessible
from withing the timeout callback
- Handle blocked clients in beforeSleep - In case a key
becomes "ready" outside of processCommand
See #7879#7880
This cleans up and simplifies the API by passing the command name as the
first argument. Previously the command name was specified explicitly,
but was still included in the argv.
* Introduce a new API's: RM_GetContextFlagsAll, and
RM_GetKeyspaceNotificationFlagsAll that will return the
full flags mask of each feature. The module writer can
check base on this value if the Flags he needs are
supported or not.
* For each flag, introduce a new value on redismodule.h,
this value represents the LAST value and should be there
as a reminder to update it when a new value is added,
also it will be used in the code to calculate the full
flags mask (assuming flags are incrementally increasing).
In addition, stated that the module writer should not use
the LAST flag directly and he should use the GetFlagAll API's.
* Introduce a new API: RM_IsSubEventSupported, that returns for a given
event and subevent, whether or not the subevent supported.
* Introduce a new macro RMAPI_FUNC_SUPPORTED(func) that returns whether
or not a function API is supported by comparing it to NULL.
* Introduce a new API: int RM_GetServerVersion();, that will return the
current Redis version in the format 0x00MMmmpp; e.g. 0x00060008;
* Changed unstable version from 999.999.999 to 255.255.255
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
The main motivation here is to provide a way for modules to create a
single, global context that can be used for logging.
Currently, it is possible to obtain a thread-safe context that is not
attached to any blocked client by using `RM_GetThreadSafeContext`.
However, the attached context is not linked to the module identity so
log messages produced are not tagged with the module name.
Ideally we'd fix this in `RM_GetThreadSafeContext` itself but as it
doesn't accept the current context as an argument there's no way to do
that in a backwards compatible manner.
This is essentially the same as calling COMMAND GETKEYS but provides a
more efficient interface that can be used in every context (i.e. not a
Redis command).
Avoid using a static buffer for short key index responses, and make it
caller's responsibility to stack-allocate a result type. Responses that
don't fit are still allocated on the heap.
This allows supplying secret configuration (for example - masterauth) via a secure channel
instead of having it in a plaintext file / command line param, while still allowing for most
of the configuration to reside there.
Also, remove 'special' case handling for --check-rdb which hasn't been relevant
since 4.0.0.
Adding [B]LMOVE <src> <dst> RIGHT|LEFT RIGHT|LEFT. deprecating [B]RPOPLPUSH.
Note that when receiving a BRPOPLPUSH we'll still propagate an RPOPLPUSH,
but on BLMOVE RIGHT LEFT we'll propagate an LMOVE
improvement to existing tests
- Replace "after 1000" with "wait_for_condition" when wait for
clients to block/unblock.
- Add a pre-existing element to target list on basic tests so
that we can check if the new element was added to the correct
side of the list.
- check command stats on the replica to make sure the right
command was replicated
Co-authored-by: Oran Agra <oran@redislabs.com>
I suppose that it was overlooked, since till recently none of the blocked commands were readonly.
other changes:
- add test for the above.
- add better support for additional (and deferring) clients for
cluster tests
- improve a test which left the client in MULTI state.
track and report memory used by clients argv.
this is very usaful in case clients started sending a command and didn't
complete it. in which case the first args of the command are already
trimmed from the query buffer.
in an effort to avoid cache misses and overheads while keeping track of
these, i avoid calling sdsZmallocSize and instead use the sdslen /
bulk-len which can at least give some insight into the problem.
This memory is now added to the total clients memory usage, as well as
the client list.
Adding -D option for redis-cli to control newline between command
responses in raw mode.
Also removing cleanup code before calling exit, just in order
to avoid adding more adding more cleanup code (redis doesn't
bother to release allocations before exit anyway)
Co-authored-by: Oran Agra <oran@redislabs.com>
Add optional GET parameter to SET command in order to set a new value to
a key and retrieve the old key value. With this change we can deprecate
`GETSET` command and use only the SET command with the GET parameter.
This commit has two aspects:
1) improve memory reporting for all the places that use sdsAllocSize to compute
memory used by a string, in this case it'll include the internal fragmentation.
2) reduce the need for realloc calls by making the sds implicitly take over
the internal fragmentation of the block it allocated.
When REDISMODULE_EVENT_CLIENT_CHANGE events are delivered, modules may
want to mutate the client state (e.g. perform authentication).
This change links the module context with the real client rather than a
fake client for these events.
The client pointed to by the module context may in some cases be a fake
client. RM_Authenticate*() calls in this case would be ineffective but
appear to succeed, and this change fails them to make it easier to catch
such cases.
The tls-ca-cert or tls-ca-cert-dir configuration parameters are only
used when Redis needs to authenticate peer certificates, in one of these
scenarios:
1. Incoming clients or replicas, with `tls-auth-clients` enabled.
2. A replica authenticating the master's peer certificate.
3. Cluster nodes authenticating other nodes when establishing the bus
protocol connection.
when slaveof config is "no one", reset any pre-existing config and resume.
also solve a memory leak if slaveof appears twice.
and fail loading if port number is out of range or not an integer.
Co-authored-by: caozhengbin <caozb@yidingyun.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
We may access and modify these two variables in signal handler function,
to guarantee them async-signal-safe, so we should set them to volatile
sig_atomic_t type.
It doesn't look like this could have caused any real issue, and it seems that
signals are handled in main thread on most platforms. But we want to follow C
and POSIX standard in signal handler function.
Make sure we handle short writes correctly, sync to disk after writing and use
rename to make sure the replacement is actually atomic.
In any case of failure old configuration will remain in place.
Also, add some additional logging to make it easier to diagnose rewrite problems.
We should sync temp DB file before renaming as rdb_fsync_range does not use
flag `SYNC_FILE_RANGE_WAIT_AFTER`.
Refer to `Linux Programmer's Manual`:
SYNC_FILE_RANGE_WAIT_AFTER
Wait upon write-out of all pages in the range after performing any write.
When fclose would fail, the previous implementation would have attempted to do fclose again
this can in theory lead to segfault.
other changes:
check for non-zero return value as failure rather than a specific error code.
this doesn't fix a real bug, just a minor cleanup.
Before this commit, we would have continued to add replies to the reply buffer even if client
output buffer limit is reached, so the used memory would keep increasing over the configured limit.
What's more, we shouldn’t write any reply to the client if it is set 'CLIENT_CLOSE_ASAP' flag
because that doesn't conform to its definition and we will close all clients flagged with
'CLIENT_CLOSE_ASAP' in ‘beforeSleep’.
Because of code execution order, before this, we may firstly write to part of the replies to
the socket before disconnecting it, but in fact, we may can’t send the full replies to clients
since OS socket buffer is limited. But this unexpected behavior makes some commands work well,
for instance ACL DELUSER, if the client deletes the current user, we need to send reply to client
and close the connection, but before, we close the client firstly and write the reply to reply
buffer. secondly, we shouldn't do this despite the fact it works well in most cases.
We add a flag 'CLIENT_CLOSE_AFTER_COMMAND' to mark clients, this flag means we will close the
client after executing commands and send all entire replies, so that we can write replies to
reply buffer during executing commands, send replies to clients, and close them later.
We also fix some implicit problems. If client output buffer limit is enforced in 'multi/exec',
all commands will be executed completely in redis and clients will not read any reply instead of
partial replies. Even more, if the client executes 'ACL deluser' the using user in 'multi/exec',
it will not read the replies after 'ACL deluser' just like before executing 'client kill' itself
in 'multi/exec'.
We added some tests for output buffer limit breach during multi-exec and using a pipeline of
many small commands rather than one with big response.
Co-authored-by: Oran Agra <oran@redislabs.com>
XREADGROUP auto-creates the consumer inside the consumer group the
first time it saw it.
When XREADGROUP is being used with NOACK option, the message will not
be added into the client's PEL and XGROUP SETID would be propagated.
When the replica gets the XGROUP SETID it will only update the last delivered
id of the group, but will not create the consumer.
So, in this commit XGROUP CREATECONSUMER is being added.
Command pattern: XGROUP CREATECONSUMER <key> <group> <consumer>.
When NOACK option is being used, createconsumer command would be
propagated as well.
In case of AOFREWRITE, consumer with an empty PEL would be saved with
XGROUP CREATECONSUMER whereas consumer with pending entries would be
saved with XCLAIM
This happens only on diskless replicas when attempting to reconnect after
failing to load an RDB file. It is more likely to occur with larger datasets.
After reconnection is initiated, replicationEmptyDbCallback() may get called
and try to write to an unconnected socket. This triggered another issue where
the connection is put into an error state and the connect handler never gets
called. The problem is a regression introduced by commit c17e597.
When all replicas waiting for a bgsave get disconnected (possibly due to output buffer limit),
It may be good to kill the bgsave child. in diskless replication it already happens, but in
disk-based, the child may still serve some purpose (for persistence).
By killing the child, we prevent it from eating COW memory in vain, and we also allow a new child fork sooner for the next full synchronization or bgsave.
We do that only if rdb persistence wasn't enabled in the configuration.
Btw, now, rdbRemoveTempFile in killRDBChild won't block server, so we can killRDBChild safely.
This commit adds streamIteratorStop call in rewriteStreamObject function in some of the return statement. Although currently this will not cause memory leak since stream id is only 16 bytes long.
Refine comment of makeThreadKillable().
This commit can be backported to 5.0, only if we also backport 8b70cb0.
Co-authored-by: Oran Agra <oran@redislabs.com>
445a4b6 introudced a makefile script that detects if the toolchain
supports c11, and it looked that it was passing on MacOS and fails on
Ubuntu, looks like Ubuntu's Dash was spawning a background process,
deleted foo.c before gcc tried to compile it.
We're already using bg_unlink in several places to delete the rdb file in the background,
and avoid paying the cost of the deletion from our main thread.
This commit uses bg_unlink to remove the temporary rdb file in the background too.
However, in case we delete that rdb file just before exiting, we don't actually wait for the
background thread or the main thread to delete it, and just let the OS clean up after us.
i.e. we open the file, unlink it and exit with the fd still open.
Furthermore, rdbRemoveTempFile can be called from a thread and was using snprintf which is
not async-signal-safe, we now use ll2string instead.
Redis 6.0 introduces I/O threads, it is so cool and efficient, we use C11
_Atomic to establish inter-thread synchronization without mutex. But the
compiler that must supports C11 _Atomic can compile redis code, that brings a
lot of inconvenience since some common platforms can't support by default such
as CentOS7, so we want to implement redis atomic type to make it more portable.
We have implemented our atomic variable for redis that only has 'relaxed'
operations in src/atomicvar.h, so we implement some operations with
'sequentially-consistent', just like the default behavior of C11 _Atomic that
can establish inter-thread synchronization. And we replace all uses of C11
_Atomic with redis atomic variable.
Our implementation of redis atomic variable uses C11 _Atomic, __atomic or
__sync macros if available, it supports most common platforms, and we will
detect automatically which feature we use. In Makefile we use a dummy file to
detect if the compiler supports C11 _Atomic. Now for gcc, we can compile redis
code theoretically if your gcc version is not less than 4.1.2(starts to support
__sync_xxx operations). Otherwise, we remove use mutex fallback to implement
redis atomic variable for performance and test. You will get compiling errors
if your compiler doesn't support all features of above.
For cover redis atomic variable tests, we add other CI jobs that build redis on
CentOS6 and CentOS7 and workflow daily jobs that run the tests on them.
For them, we just install gcc by default in order to cover different compiler
versions, gcc is 4.4.7 by default installation on CentOS6 and 4.8.5 on CentOS7.
We restore the feature that we can test redis with Helgrind to find data race
errors. But you need install Valgrind in the default path configuration firstly
before running your tests, since we use macros in helgrind.h to tell Helgrind
inter-thread happens-before relationship explicitly for avoiding false positives.
Please open an issue on github if you find data race errors relate to this commit.
Unrelated:
- Fix redefinition of typedef 'RedisModuleUserChangedFunc'
For some old version compilers, they will report errors or warnings, if we
re-define function type.
If one thread got SIGSEGV, function sigsegvHandler() would be triggered,
it would call bioKillThreads(). But call pthread_cancel() to cancel itself
would make it block. Also note that if SIGSEGV is caught by bio thread, it
should kill the main thread in order to give a positive report.
Rather than blindly evicting until maxmemory limit is achieved, this
update adds a time limit to eviction. While over the maxmemory limit,
eviction will process before each command AND as a timeProc when no
commands are running.
This will reduce the latency impact on many cases, especially pathological
cases like massive used memory increase during dict rehashing.
There is a risk that some other edge cases (like massive pipelined use
of MGET) could cause Redis memory usage to keep growing despite the
eviction attempts, so a new maxmemory-eviction-tenacity config is
introduced to let users mitigate that.
This commit makes stream object returning "stream" as encoding type in OBJECT ENCODING subcommand and DEBUG OBJECT command.
Till now, it would return "unknown"
This is a catch-all test to confirm that that rewrite produces a valid
output for all parameters and that this process does not introduce
undesired configuration changes.
Save parameters should either be default or whatever specified in the
config file. This fixes an issue introduced in #7092 which causes
configuration file settings to be applied on top of the defaults.
Improve RM_Call inline documentation about the fmt argument
so that we don't completely depend on the web docs.
Co-authored-by: Oran Agra <oran@redislabs.com>
There was a bug. Although cluster replicas would allow read commands,
they would not allow a MULTI-EXEC that's composed solely of read commands.
Adds tests for coverage.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Eran Liberty <eranl@amazon.com>
Starting redis 6.0 and the changes we made to the diskless master to be
suitable for TLS, I made the master avoid reaping (wait3) the pid of the
child until we know all replicas are done reading their rdb.
I did that in order to avoid a state where the rdb_child_pid is -1 but
we don't yet want to start another fork (still busy serving that data to
replicas).
It turns out that the solution used so far was problematic in case the
fork child was being killed (e.g. by the kernel OOM killer), in that
case there's a chance that we currently disabled the read event on the
rdb pipe, since we're waiting for a replica to become writable again.
and in that scenario the master would have never realized the child
exited, and the replica will remain hung too.
Note that there's no mechanism to detect a hung replica while it's in
rdb transfer state.
The solution here is to add another pipe which is used by the parent to
tell the child it is safe to exit. this mean that when the child exits,
for whatever reason, it is safe to reap it.
Besides that, i'm re-introducing an adjustment to REPLCONF ACK which was
part of #6271 (Accelerate diskless master connections) but was dropped
when that PR was rebased after the TLS fork/pipe changes (5a47794).
Now that RdbPipeCleanup no longer calls checkChildrenDone, and the ACK
has chance to detect that the child exited, it should be the one to call
it so that we don't have to wait for cron (server.hz) to do that.
Fix issues with writeConn() which resulted with corruption of the stream by leaving an extra byte in the buffer. The trigger for this is partial writes or write errors which were not experienced on Linux but reported on macOS.
During long running scripts or loading RDB/AOF, we may need to do some
defragging. Since processEventsWhileBlocked is called periodically at
unknown intervals, and many cron jobs either depend on run_with_period
(including active defrag), or rely on being called at server.hz rate
(i.e. active defrag knows ho much time to run by looking at server.hz),
the whileBlockedCron may have to run a loop triggering the cron jobs in it
(currently only active defrag) several times.
Other changes:
- Adding a test for defrag during aof loading.
- Changing key-load-delay config to take negative values for fractions
of a microsecond sleep
DEBUG ZIPLIST <key> currently returns the following error string if the
key is not a ziplist: "ERR Not an sds encoded string.". This looks like
an accidental copy/paste error from the error returned in the else if
branch above where this string is returned if the key is not an sds
string. The command was added in
ac61f90625 and looking at the commit,
nothing indicates that it is not an accidental typo.
The error string now returns a correct error: "Not a ziplist encoded
object", which accurately describes the error.
The previous algorithm is of O(n^2) time complexity.
It would have run through the ziplist entries one by one, each time doing a `realloc` and a
`memmove` (moving the entire tail of the ziplist).
The new algorithm is O(n), it runs over all the records once, computing the size of the `realloc`
needed, then does one `realloc`, and run thought the records again doing many smaller `memmove`s,
each time moving just one record.
So this change reduces many reallocs, and moves each record just once.
Co-authored-by: zhumaohua <zhumaohua@megvii.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Update adds a general source for retrieving a monotonic time.
In addition, AE has been updated to utilize the new monotonic
clock for timer processing.
This performance improvement is **not** enabled in a default build due to various H/W compatibility
concerns, see README.md for details. It does however change the default use of gettimeofday with
clock_gettime and somewhat improves performance.
This update provides the following
1. An interface for retrieving a monotonic clock. getMonotonicUs returns a uint64_t (aka monotime)
with the number of micro-seconds from an arbitrary point. No more messing with tv_sec/tv_usec.
Simple routines are provided for measuring elapsed milli-seconds or elapsed micro-seconds (the
most common use case for a monotonic timer). No worries about time moving backwards.
2. High-speed assembler implementation for x86 and ARM. The standard method for retrieving the
monotonic clock is POSIX.1b (1993): clock_gettime(CLOCK_MONOTONIC, timespec*). However, most
modern processors provide a constant speed instruction clock which can be retrieved in a fraction
of the time that it takes to call clock_gettime. For x86, this is provided by the RDTSC
instruction. For ARM, this is provided by the CNTVCT_EL0 instruction. As a compile-time option,
these high-speed timers can be chosen. (Default is POSIX clock_gettime.)
3. Refactor of event loop timers. The timer processing in ae.c has been refactored to use the new
monotonic clock interface. This results in simpler/cleaner logic and improved performance.
65a3307bc (released in 6.0.6) has a side effect, when processCommand
rejects a command with pre-made shared object error string, it trims the
newlines from the end of the string. if that string is later used with
addReply, the newline will be missing, breaking the protocol, and
leaving the client hung.
It seems that the only scenario which this happens is when replying with
-LOADING to some command, and later using that reply from the CONFIG
SET command (still during loading). this will result in hung client.
Refactoring the code in order to avoid trimming these newlines from
shared string objects, and do the newline trimming only in other cases
where it's needed.
Co-authored-by: Guy Benoish <guy.benoish@redislabs.com>
During a long AOF or RDB loading, the memory stats were not updated, and
INFO would return stale data, specifically about fragmentation and RSS.
In the past some of these were sampled directly inside the INFO command,
but were moved to cron as an optimization.
This commit introduces a concept of loadingCron which should take
some of the responsibilities of serverCron.
It attempts to limit it's rate to approximately the server Hz, but may
not be very accurate.
In order to avoid too many system call, we use the cached ustime, and
also make sure to update it in both AOF loading and RDB loading inside
processEventsWhileBlocked (it seems AOF loading was missing it).
If the server gets MULTI command followed by only read
commands, and right before it gets the EXEC it reaches OOM,
the client will get OOM response.
So, from now on, it will get OOM response only if there was
at least one command that was tagged with `use-memory` flag
A first step to enable a consistent full percentile analysis on query latency so that we can fully understand the performance and stability characteristics of the redis-server system we are measuring. It also improves the instantaneous reported metrics, and the csv output format.
Otherwise, it is treated as a single allocation and freed synchronously. The following logic is used for estimating the effort in constant-ish time complexity:
1. Check the number of nodes.
1. Add an allocation for each consumer group registered inside the stream.
1. Check the number of PELs in the first CG, and then add this count times the number of CGs.
1. Check the number of consumers in the first CG, and then add this count times the number of CGs.
The previous fix using _Atomic was insufficient, since we check and set it in
different places.
The implications of this bug are just that a portion of the bug report will be shown
twice, in the race case of two concurrent crashes.
When calling to LPOS command when RANK is higher than matches,
the return value is non valid response. For example:
```
LPUSH l a
:1
LPOS l b RANK 5 COUNT 10
*-4
```
It may break client-side parser.
Now, we count how many replies were replied in the array.
```
LPUSH l a
:1
LPOS l b RANK 5 COUNT 10
*0
```
After fork, the child process(redis-aof-rewrite) will get the fd opened
by the parent process(redis), when redis killed by kill -9, it will not
graceful exit(call prepareForShutdown()), so redis-aof-rewrite thread may still
alive, the fd(lock) will still be held by redis-aof-rewrite thread, and
redis restart will fail to get lock, means fail to start.
This issue was causing failures in the cluster tests in github actions.
Co-authored-by: Oran Agra <oran@redislabs.com>
Since users often post just the crash log in github issues, the log
print that's above it is missing.
No reason not to include the size in the panic message itself.
65a3307bc9 added rejectCommand which takes an robj reply and passes it
through addReplyErrorSafe to addReplyErrorLength.
The robj contains newline at it's end, but addReplyErrorSafe converts it
to spaces, and passes it to addReplyErrorLength which adds the protocol
newlines.
The result was that most error replies (like OOM) had extra two trailing
spaces in them.
Avoid re-configuring (and validating) SSL/TLS configuration on `CONFIG
SET` when TLS is not actively enabled for incoming connections, cluster
bus or replication.
This fixes failures when tests run without `--tls` on binaries that were
built with TLS support.
An additional benefit is that it's now possible to perform a multi-step
configuration process while TLS is disabled. The new configuration will
be verified and applied only when TLS is effectively enabled.
In order to keep the redismodule.h self-contained but still usable with
gcc v10 and later, annotate each API function tentative definition with
the __common__ attribute. This avoids the 'multiple definition' errors
modules will otherwise see for all API functions at link time.
Further details at gcc.gnu.org/gcc-10/porting_to.html
Turn the existing __attribute__ ((unused)), ((__common__)) and ((print))
annotations into conditional macros for any compilers not accepting this
syntax. These macros only expand to API annotations under gcc.
Provide a pre- and post- macro for every API function, so that they can
be defined differently by the file that includes redismodule.h.
Removing REDISMODULE_API_FUNC in the interest of keeping the function
declarations readable.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Client that issued WAIT last will most likely have the highest replication offset, so imagine a probably common case where all clients are waiting for the same number of replicas. we prefer the loop to start from the last client (one waiting for the highest offset), so that the optimization in the function will call replicationCountAcksByOffset for each client until it found a good one, and stop calling it for the rest of the clients.
the way the loop was implemented would mean that in such case it is likely to call replicationCountAcksByOffset for all clients.
Note: the change from > to >= is not directly related to the above.
Co-authored-by: 曹正斌 <caozb@jiedaibao.com>
Add Linux kernel OOM killer control option.
This adds the ability to control the Linux OOM killer oom_score_adj
parameter for all Redis processes, depending on the process role (i.e.
master, replica, background child).
A oom-score-adj global boolean flag control this feature. In addition,
specific values can be configured using oom-score-adj-values if
additional tuning is required.
This is a rebased version of #3078 originally by shaharmor
with the following patches by TysonAndre made after rebasing
to work with the updated C API:
1. Add 2 more unit tests
(wrong argument count error message, integer over 64 bits)
2. Use addReplyArrayLen instead of addReplyMultiBulkLen.
3. Undo changes to src/help.h - for the ZMSCORE PR,
I heard those should instead be automatically
generated from the redis-doc repo if it gets updated
Motivations:
- Example use case: Client code to efficiently check if each element of a set
of 1000 items is a member of a set of 10 million items.
(Similar to reasons for working on #7593)
- HMGET and ZMSCORE already exist. This may lead to developers deciding
to implement functionality that's best suited to a regular set with a
data type of sorted set or hash map instead, for the multi-get support.
Currently, multi commands or lua scripting to call sismember multiple times
would almost definitely be less efficient than a native smismember
for the following reasons:
- Need to fetch the set from the string every time
instead of reusing the C pointer.
- Using pipelining or multi-commands would result in more bytes sent
and received by the client for the repeated SISMEMBER KEY sections.
- Need to specially encode the data and decode it from the client
for lua-based solutions.
- Proposed solutions using Lua or SADD/SDIFF could trigger writes to
memory, which is undesirable on a redis replica server
or when commands get replicated to replicas.
Co-Authored-By: Shahar Mor <shahar@peer5.com>
Co-Authored-By: Tyson Andre <tysonandre775@hotmail.com>
In redismodule.h, RedisModule_DeauthenticateAndCloseClient returns void
`void REDISMODULE_API_FUNC(RedisModule_DeauthenticateAndCloseClient)(RedisModuleCtx *ctx, uint64_t client_id);`
But in module.c, RM_DeauthenticateAndCloseClient returns int
`int RM_DeauthenticateAndCloseClient(RedisModuleCtx *ctx, uint64_t client_id)`
It it safe to change return value from `void` to `int` from the user's perspective.
Added RedisModule_HoldString that either returns a
shallow copy of the given String (by increasing
the String ref count) or a new deep copy of String
in case its not possible to get a shallow copy.
Co-authored-by: Itamar Haber <itamar@redislabs.com>
Add logic to redis-cli to display RESP3 PUSH messages when we detect
STDOUT is a tty, with an optional command-line argument to override
the default behavior.
The new argument: --show-pushes <yn>
Examples:
$ redis-cli -3 --show-pushes no
$ echo "client tracking on\nget k1\nset k1 v1"| redis-cli -3 --show-pushes y
Before this fix we where attempting to select a db before creating db the DB, see: #7323
This issue doesn't seem to have any implications, since the selected DB index is 0,
the db pointer remains NULL, and will later be correctly set before using this dummy
client for the first time.
As we know, we call 'moduleInitModulesSystem()' before 'initServer()'. We will allocate
memory for server.db in 'initServer', but we call 'createClient()' that will call 'selectDb()'
in 'moduleInitModulesSystem()', before the databases where created. Instead, we should call
'createClient()' for moduleFreeContextReusedClient after 'initServer()'.
Diskless master has some inherent latencies.
1) fork starts with delay from cron rather than immediately
2) replica is put online only after an ACK. but the ACK
was sent only once a second.
3) but even if it would arrive immediately, it will not
register in case cron didn't yet detect that the fork is done.
Besides that, when a replica disconnects, it doesn't immediately
attempts to re-connect, it waits for replication cron (one per second).
in case it was already online, it may be important to try to re-connect
as soon as possible, so that the backlog at the master doesn't vanish.
In case it disconnected during rdb transfer, one can argue that it's
not very important to re-connect immediately, but this is needed for the
"diskless loading short read" test to be able to run 100 iterations in 5
seconds, rather than 3 (waiting for replication cron re-connection)
changes in this commit:
1) sync command starts a fork immediately if no sync_delay is configured
2) replica sends REPLCONF ACK when done reading the rdb (rather than on 1s cron)
3) when a replica unexpectedly disconnets, it immediately tries to
re-connect rather than waiting 1s
4) when when a child exits, if there is another replica waiting, we spawn a new
one right away, instead of waiting for 1s replicationCron.
5) added a call to connectWithMaster from replicationSetMaster. which is called
from the REPLICAOF command but also in 3 places in cluster.c, in all of
these the connection attempt will now be immediate instead of delayed by 1
second.
side note:
we can add a call to rdbPipeReadHandler in replconfCommand when getting
a REPLCONF ACK from the replica to solve a race where the replica got
the entire rdb and EOF marker before we detected that the pipe was
closed.
in the test i did see this race happens in one about of some 300 runs,
but i concluded that this race is unlikely in real life (where the
replica is on another host and we're more likely to first detect the
pipe was closed.
the test runs 100 iterations in 3 seconds, so in some cases it'll take 4
seconds instead (waiting for another REPLCONF ACK).
Removing unneeded startBgsaveForReplication from updateSlavesWaitingForBgsave
Now that CheckChildrenDone is calling the new replicationStartPendingFork
(extracted from serverCron) there's actually no need to call
startBgsaveForReplication from updateSlavesWaitingForBgsave anymore,
since as soon as updateSlavesWaitingForBgsave returns, CheckChildrenDone is
calling replicationStartPendingFork that handles that anyway.
The code in updateSlavesWaitingForBgsave had a bug in which it ignored
repl-diskless-sync-delay, but removing that code shows that this bug was
hiding another bug, which is that the max_idle should have used >= and
not >, this one second delay has a big impact on my new test.
this race would only happen when two threads paniced at the same time,
and even then the only consequence is some extra log lines.
race reported in #7391
This makes it possible to add tests that generate assertions, and run
them with valgrind, making sure that there are no memory violations
prior to the assertion.
New config options:
- crash-log-enabled - can be disabled for cleaner core dumps
- crash-memcheck-enabled - useful for faster termination after a crash
- use-exit-on-panic - to be used by the test suite so that valgrind can
detect leaks and memory corruptions
Other changes:
- Crash log is printed even on system that dont HAVE_BACKTRACE, i.e. in
both SIGSEGV and assert / panic
- Assertion and panic won't print registers and code around EIP (which
was useless), but will do fast memory test (which may still indicate
that the assertion was due to memory corrpution)
I had to reshuffle code in order to re-use it, so i extracted come code
into function without actually doing any changes to the code:
- logServerInfo
- logModulesInfo
- doFastMemoryTest (with the exception of it being conditional)
- dumpCodeAroundEIP
changes to the crash report on segfault:
- logRegisters is called right after the stack trace (before info) done
just in order to have more re-usable code
- stack trace skips the first two items on the stack (the crash log and
signal handler functions)
Syntax: `ZMSCORE KEY MEMBER [MEMBER ...]`
This is an extension of #2359
amended by Tyson Andre to work with the changed unstable API,
add more tests, and consistently return an array.
- It seemed as if it would be more likely to get reviewed
after updating the implementation.
Currently, multi commands or lua scripting to call zscore multiple times
would almost definitely be less efficient than a native ZMSCORE
for the following reasons:
- Need to fetch the set from the string every time instead of reusing the C
pointer.
- Using pipelining or multi-commands would result in more bytes sent by
the client for the repeated `ZMSCORE KEY` sections.
- Need to specially encode the data and decode it from the client
for lua-based solutions.
- The fastest solution I've seen for large sets(thousands or millions)
involves lua and a variadic ZADD, then a ZINTERSECT, then a ZRANGE 0 -1,
then UNLINK of a temporary set (or lua). This is still inefficient.
Co-authored-by: Tyson Andre <tysonandre775@hotmail.com>
The Redis sentinel would crash with a segfault after a few minutes
because it tried to read from a page without read permissions. Check up
front whether the sds is long enough to contain redis:slave or
redis:master before memcmp() as is done everywhere else in
sentinelRefreshInstanceInfo().
Bug report and commit message from Theo Buehler. Fix from Nam Nguyen.
Co-authored-by: Nam Nguyen <namn@berkeley.edu>
valsize was not modified during the for loop below instead of getting from c->argv[4], therefore there is no need to put inside the for loop.. Moreover, putting the check outside loop will also avoid memory leaking, decrRefCount(key) should be called in the original code if we put the check in for loop
The connection API may create an accepted connection object in an error
state, and callers are expected to check it before attempting to use it.
Co-authored-by: mrpre <mrpre@163.com>
