Deleting a stream while a client is blocked XREADGROUP should unblock the client.
The idea is that if a client is blocked via XREADGROUP is different from
any other blocking type in the sense that it depends on the existence of both
the key and the group. Even if the key is deleted and then revived with XADD
it won't help any clients blocked on XREADGROUP because the group no longer
exist, so they would fail with -NOGROUP anyway.
The conclusion is that it's better to unblock these clients (with error) upon
the deletion of the key, rather than waiting for the first XADD.
Other changes:
1. Slightly optimize all `serveClientsBlockedOn*` functions by checking `server.blocked_clients_by_type`
2. All `serveClientsBlockedOn*` functions now use a list iterator rather than looking at `listFirst`, relying
on `unblockClient` to delete the head of the list. Before this commit, only `serveClientsBlockedOnStreams`
used to work like that.
3. bugfix: CLIENT UNBLOCK ERROR should work even if the command doesn't have a timeout_callback
(only relevant to module commands)
In some special commands like eval_ro / fcall_ro we allow no-writes commands.
But may-replicate commands are no-writes too, that leads crash when client pause write:
`Expected '*table size: 4096*' to match '*table size: 8192*'`
This test failed once on daily macOS, the reason is because
the bgsave has not stopped after the kill and `after 200`.
So there is a child process and no rehash triggered.
This commit use `waitForBgsave` to wait for it to finish.
Normally, `redis-cli` escapes non-printable data received from Redis, using a custom scheme (which is also used to handle quoted input). When using `--json` this is not desired as it is not compatible with RFC 7159, which specifies JSON strings are assumed to be Unicode and how they should be escaped.
This commit changes `--json` to follow RFC 7159, which means that properly encoded Unicode strings in Redis will result with a valid Unicode JSON.
However, this introduces a new problem with `--json` and data that is not valid Unicode (e.g., random binary data, text that follows other encoding, etc.). To address this, we add `--quoted-json` which produces JSON strings that follow the original redis-cli quoting scheme.
For example, a value that consists of only null (0x00) bytes will show up as:
* `"\u0000\u0000\u0000"` when using `--json`
* `"\\x00\\x00\\x00"` when using `--quoted-json`
1. since ZSKIPLIST_P is float, using it directly inside the condition used to causes floating point code to be used (gcc/x86)
2. In some operating system(eg.Windows), the largest value returned from random() is 0x7FFF(15bit), so after bitwise AND with 0xFFFF, the probability of the less operation returning true in the while loop's condition is no more equal to ZSKIPLIST_P.
3. In case some library has random() returning int in range [0~ZSKIPLIST_P*65535], the while loop will be an infinite loop.
4. on Linux where RAND_MAX is higher than 0xFFFF, this change actually improves precision (despite not matching the result against a float value)
In order to resolve some flaky tests which hard rely on examine memory footprint.
we introduce the following fixes:
# Fix in client-eviction test - by @yoav-steinberg
Sometime the libc allocator can use different size client struct allocations.
this may cause unexpected memory calculations to fail the test.
# Introduce new DEBUG command for disabling reply buffer resizing
In order to eliminate reply buffer resizing during specific tests.
we introduced the ability to disable (and enable) the resizing cron job
Co-authored-by: yoav-steinberg yoav@redislabs.com
* Moved configuration storage from a list to a hash table
* Configs are returned in a non-deterministic order. It's possible that a client was relying on order (hopefully not).
* Fixed an esoteric bug where if you did a set with an alias with an error, it would throw an error indicating a bug with the preferred name for that config.
After introducing #9822 need to prevent client reply buffer shrink
to maintain correct client memory math.
add needs:debug missing one one test.
Co-authored-by: Oran Agra <oran@redislabs.com>
This PR fix 2 issues on Lua scripting:
* Server error reply statistics (some errors were counted twice).
* Error code and error strings returning from scripts (error code was missing / misplaced).
## Statistics
a Lua script user is considered part of the user application, a sophisticated transaction,
so we want to count an error even if handled silently by the script, but when it is
propagated outwards from the script we don't wanna count it twice. on the other hand,
if the script decides to throw an error on its own (using `redis.error_reply`), we wanna
count that too.
Besides, we do count the `calls` in command statistics for the commands the script calls,
we we should certainly also count `failed_calls`.
So when a simple `eval "return redis.call('set','x','y')" 0` fails, it should count the failed call
to both SET and EVAL, but the `errorstats` and `total_error_replies` should be counted only once.
The PR changes the error object that is raised on errors. Instead of raising a simple Lua
string, Redis will raise a Lua table in the following format:
```
{
err='<error message (including error code)>',
source='<User source file name>',
line='<line where the error happned>',
ignore_error_stats_update=true/false,
}
```
The `luaPushError` function was modified to construct the new error table as describe above.
The `luaRaiseError` was renamed to `luaError` and is now simply called `lua_error` to raise
the table on the top of the Lua stack as the error object.
The reason is that since its functionality is changed, in case some Redis branch / fork uses it,
it's better to have a compilation error than a bug.
The `source` and `line` fields are enriched by the error handler (if possible) and the
`ignore_error_stats_update` is optional and if its not present then the default value is `false`.
If `ignore_error_stats_update` is true, the error will not be counted on the error stats.
When parsing Redis call reply, each error is translated to a Lua table on the format describe
above and the `ignore_error_stats_update` field is set to `true` so we will not count errors
twice (we counted this error when we invoke the command).
The changes in this PR might have been considered as a breaking change for users that used
Lua `pcall` function. Before, the error was a string and now its a table. To keep backward
comparability the PR override the `pcall` implementation and extract the error message from
the error table and return it.
Example of the error stats update:
```
127.0.0.1:6379> lpush l 1
(integer) 2
127.0.0.1:6379> eval "return redis.call('get', 'l')" 0
(error) WRONGTYPE Operation against a key holding the wrong kind of value. script: e471b73f1ef44774987ab00bdf51f21fd9f7974a, on @user_script:1.
127.0.0.1:6379> info Errorstats
# Errorstats
errorstat_WRONGTYPE:count=1
127.0.0.1:6379> info commandstats
# Commandstats
cmdstat_eval:calls=1,usec=341,usec_per_call=341.00,rejected_calls=0,failed_calls=1
cmdstat_info:calls=1,usec=35,usec_per_call=35.00,rejected_calls=0,failed_calls=0
cmdstat_lpush:calls=1,usec=14,usec_per_call=14.00,rejected_calls=0,failed_calls=0
cmdstat_get:calls=1,usec=10,usec_per_call=10.00,rejected_calls=0,failed_calls=1
```
## error message
We can now construct the error message (sent as a reply to the user) from the error table,
so this solves issues where the error message was malformed and the error code appeared
in the middle of the error message:
```diff
127.0.0.1:6379> eval "return redis.call('set','x','y')" 0
-(error) ERR Error running script (call to 71e6319f97b0fe8bdfa1c5df3ce4489946dda479): @user_script:1: OOM command not allowed when used memory > 'maxmemory'.
+(error) OOM command not allowed when used memory > 'maxmemory' @user_script:1. Error running script (call to 71e6319f97b0fe8bdfa1c5df3ce4489946dda479)
```
```diff
127.0.0.1:6379> eval "redis.call('get', 'l')" 0
-(error) ERR Error running script (call to f_8a705cfb9fb09515bfe57ca2bd84a5caee2cbbd1): @user_script:1: WRONGTYPE Operation against a key holding the wrong kind of value
+(error) WRONGTYPE Operation against a key holding the wrong kind of value script: 8a705cfb9fb09515bfe57ca2bd84a5caee2cbbd1, on @user_script:1.
```
Notica that `redis.pcall` was not change:
```
127.0.0.1:6379> eval "return redis.pcall('get', 'l')" 0
(error) WRONGTYPE Operation against a key holding the wrong kind of value
```
## other notes
Notice that Some commands (like GEOADD) changes the cmd variable on the client stats so we
can not count on it to update the command stats. In order to be able to update those stats correctly
we needed to promote `realcmd` variable to be located on the client struct.
Tests was added and modified to verify the changes.
Related PR's: #10279, #10218, #10278, #10309
Co-authored-by: Oran Agra <oran@redislabs.com>
Avoid deferred array reply on genericZrangebyrankCommand() when consumer type is client.
I.e. any ZRANGE / ZREVRNGE (when tank is used).
This was a performance regression introduced in #7844 (v 6.2) mainly affecting pipelined workloads.
Co-authored-by: Oran Agra <oran@redislabs.com>
This is basically just a subtree pull of the latest (unreleased) hiredis.
Unfortunately, the `sds -> hisds` patch was pulled as a subtree update from a remote branch rather than a local redis change. Because of that, it goes away on every subtree update. It is now applied as a local commit so it should survive in the future.
Adds the ability to track the lag of a consumer group (CG), that is, the number
of entries yet-to-be-delivered from the stream.
The proposed constant-time solution is in the spirit of "best-effort."
Partially addresses #8737.
## Description of approach
We add a new "entries_added" property to the stream. This starts at 0 for a new
stream and is incremented by 1 with every `XADD`. It is essentially an all-time
counter of the entries added to the stream.
Given the stream's length and this counter value, we can trivially find the logical
"entries_added" counter of the first ID if and only if the stream is contiguous.
A fragmented stream contains one or more tombstones generated by `XDEL`s.
The new "xdel_max_id" stream property tracks the latest tombstone.
The CG also tracks its last delivered ID's as an "entries_read" counter and
increments it independently when delivering new messages, unless the this
read counter is invalid (-1 means invalid offset). When the CG's counter is
available, the reported lag is the difference between added and read counters.
Lastly, this also adds a "first_id" field to the stream structure in order to make
looking it up cheaper in most cases.
## Limitations
There are two cases in which the mechanism isn't able to track the lag.
In these cases, `XINFO` replies with `null` in the "lag" field.
The first case is when a CG is created with an arbitrary last delivered ID,
that isn't "0-0", nor the first or the last entries of the stream. In this case,
it is impossible to obtain a valid read counter (short of an O(N) operation).
The second case is when there are one or more tombstones fragmenting
the stream's entries range.
In both cases, given enough time and assuming that the consumers are
active (reading and lacking) and advancing, the CG should be able to
catch up with the tip of the stream and report zero lag.
Once that's achieved, lag tracking would resume as normal (until the
next tombstone is set).
## API changes
* `XGROUP CREATE` added with the optional named argument `[ENTRIESREAD entries-read]`
for explicitly specifying the new CG's counter.
* `XGROUP SETID` added with an optional positional argument `[ENTRIESREAD entries-read]`
for specifying the CG's counter.
* `XINFO` reports the maximal tombstone ID, the recorded first entry ID, and total
number of entries added to the stream.
* `XINFO` reports the current lag and logical read counter of CGs.
* `XSETID` is an internal command that's used in replication/aof. It has been added with
the optional positional arguments `[ENTRIESADDED entries-added] [MAXDELETEDID max-deleted-entry-id]`
for propagating the CG's offset and maximal tombstone ID of the stream.
## The generic unsolved problem
The current stream implementation doesn't provide an efficient way to obtain the
approximate/exact size of a range of entries. While it could've been nice to have
that ability (#5813) in general, let alone specifically in the context of CGs, the risk
and complexities involved in such implementation are in all likelihood prohibitive.
## A refactoring note
The `streamGetEdgeID` has been refactored to accommodate both the existing seek
of any entry as well as seeking non-deleted entries (the addition of the `skip_tombstones`
argument). Furthermore, this refactoring also migrated the seek logic to use the
`streamIterator` (rather than `raxIterator`) that was, in turn, extended with the
`skip_tombstones` Boolean struct field to control the emission of these.
Co-authored-by: Guy Benoish <guy.benoish@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Avoid sprintf/ll2string on setDeferredAggregateLen()/addReplyLongLongWithPrefix() when we can used shared objects.
In some pipelined workloads this achieves about 10% improvement.
Co-authored-by: Oran Agra <oran@redislabs.com>
In case HELLO message received from another sentinel, with same address like another instance registered in the past but with different runid. Then there was cumbersome logic to modify the instance the port to 0 to in order to mark as invalid and later on to delete it. But the deletion is happening during update of instances in such a way that we might end up accessing an instance that was deleted just before.
Didn't find a good reason why to postpone the deletion action of an obsolete instance (deletion is taking place instantly, for other cases ) -> Lets delete at once
There is a mixture of logic of Sentinel address update with the logic of deletion of Sentinels that match a given Address -> Split to two!
The test will fail on slow machines (valgrind or FreeBsd).
Because in #10256 when WATCH is called on a key that's already
logically expired, we will add an `expired` flag, and we will
skip it in `isWatchedKeyExpired` check.
Apparently we need to increase the expiration time so that
the key can not expire logically then the WATCH is called.
Also added retries to make sure it doesn't fail. I suppose
100ms is enough in valgrind, tested locally, no need to retry.
There are scenarios where it results in many small objects in the reply list,
such as commands heavily using deferred array replies (`addReplyDeferredLen`).
E.g. what COMMAND command and CLUSTER SLOTS used to do (see #10056, #7123),
but also in case of a transaction or a pipeline of commands that use just one differed array reply.
We used to have to run multiple loops along with multiple calls to `write()` to send data back to
peer based on the current code, but by means of `writev()`, we can gather those scattered
objects in reply list and include the static reply buffer as well, then send it by one system call,
that ought to achieve higher performance.
In the case of TLS, we simply check and concatenate buffers into one big buffer and send it
away by one call to `connTLSWrite()`, if the amount of all buffers exceeds `NET_MAX_WRITES_PER_EVENT`,
then invoke `connTLSWrite()` multiple times to avoid a huge massive of memory copies.
Note that aside of reducing system calls, this change will also reduce the amount of
small TCP packets sent.
When WATCH is called on a key that's already logically expired, avoid discarding the
transaction when the keys is actually deleted.
When WATCH is called, a flag is stored if the key is already expired
at the time of watch. The expired key is not deleted, only checked.
When a key is "touched", if it is deleted and it was already expired
when a client watched it, the client is not marked as dirty.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: zhaozhao.zz <zhaozhao.zz@alibaba-inc.com>
Current implementation simple idle client which serves no traffic still
use ~17Kb of memory. this is mainly due to a fixed size reply buffer
currently set to 16kb.
We have encountered some cases in which the server operates in a low memory environments.
In such cases a user who wishes to create large connection pools to support potential burst period,
will exhaust a large amount of memory to maintain connected Idle clients.
Some users may choose to "sacrifice" performance in order to save memory.
This commit introduce a dynamic mechanism to shrink and expend the client reply buffer based on
periodic observed peak.
the algorithm works as follows:
1. each time a client reply buffer has been fully written, the last recorded peak is updated:
new peak = MAX( last peak, current written size)
2. during clients cron we check for each client if the last observed peak was:
a. matching the current buffer size - in which case we expend (resize) the buffer size by 100%
b. less than half the buffer size - in which case we shrink the buffer size by 50%
3. In any case we will **not** resize the buffer in case:
a. the current buffer peak is less then the current buffer usable size and higher than 1/2 the
current buffer usable size
b. the value of (current buffer usable size/2) is less than 1Kib
c. the value of (current buffer usable size*2) is larger than 16Kib
4. the peak value is reset to the current buffer position once every **5** seconds. we maintain a new
field in the client structure (buf_peak_last_reset_time) which is used to keep track of how long it
passed since the last buffer peak reset.
### **Interface changes:**
**CIENT LIST** - now contains 2 new extra fields:
rbs= < the current size in bytes of the client reply buffer >
rbp=< the current value in bytes of the last observed buffer peak position >
**INFO STATS** - now contains 2 new statistics:
reply_buffer_shrinks = < total number of buffer shrinks performed >
reply_buffer_expends = < total number of buffer expends performed >
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Yoav Steinberg <yoav@redislabs.com>
This implements the following main pieces of functionality:
* Renames key spec "CHANNEL" to be "NOT_KEY", and update the documentation to
indicate it's for cluster routing and not for any other key related purpose.
* Add the getchannels-api, so that modules can now define commands that are subject to
ACL channel permission checks.
* Add 4 new flags that describe how a module interacts with a command (SUBSCRIBE, PUBLISH,
UNSUBSCRIBE, and PATTERN). They are all technically composable, however not sure how a
command could both subscribe and unsubscribe from a command at once, but didn't see
a reason to add explicit validation there.
* Add two new module apis RM_ChannelAtPosWithFlags and RM_IsChannelsPositionRequest to
duplicate the functionality provided by the keys position APIs.
* The RM_ACLCheckChannelPermissions (only released in 7.0 RC1) was changed to take flags
rather than a boolean literal.
* The RM_ACLCheckKeyPermissions (only released in 7.0 RC1) was changed to take flags
corresponding to keyspecs instead of custom permission flags. These keyspec flags mimic
the flags for ACLCheckChannelPermissions.
Make sure the status return from loading multiple AOF files reflects the overall
result, not just the one of the last file.
When one of the AOF files succeeded to load, but the last AOF file
was empty, the loadAppendOnlyFiles will return AOF_EMPTY.
This commit changes this behavior, and return AOF_OK in that case.
This can happen for example, when loading old AOF file, and no more commands processed,
the manifest file will include base AOF file with data, and empty incr AOF file.
Co-authored-by: chenyang8094 <chenyang8094@users.noreply.github.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
This is a followup work for #10278, and a discussion about #10279
The changes:
- fix failed_calls in command stats for blocked clients that got error.
including CLIENT UNBLOCK, and module replying an error from a thread.
- fix latency stats for XREADGROUP that filed with -NOGROUP
Theory behind which errors should be counted:
- error stats represents errors returned to the user, so an error handled by a
module should not be counted.
- total error counter should be the same.
- command stats represents execution of commands (even with RM_Call, and if
they fail or get rejected it counts these calls in commandstats, so it should
also count failed_calls)
Some thoughts about Scripts:
for scripts it could be different since they're part of user code, not the infra (not an extension to redis)
we certainly want commandstats to contain all calls and errors
a simple script is like mult-exec transaction so an error inside it should be counted in error stats
a script that replies with an error to the user (using redis.error_reply) should also be counted in error stats
but then the problem is that a plain `return redis.call("SET")` should not be counted twice (once for the SET
and once for EVAL)
so that's something left to be resolved in #10279
This includes two fixes:
* We forgot to count non-key reallocs in defragmentation stats.
* Fix the script defrag tests so to make dict entries less signigicant in fragmentation by making the scripts larger.
This assures active defrage will complete and reach desired results.
Some inherent fragmentation might exists in dict entries which we need to ignore.
This lead to occasional CI failures.
Consider the following example:
1. geoadd k1 -0.15307903289794921875 85 n1 0.3515625 85.00019260486917005437 n2.
2. geodist k1 n1 n2 returns "4891.9380"
3. but GEORADIUSBYMEMBER k1 n1 4891.94 m only returns n1.
n2 is in the boundingbox but out of search areas.So we let search areas contain boundingbox to get n2.
Co-authored-by: Binbin <binloveplay1314@qq.com>
publishshard was added in #8621 (7.0 RC1), but the publishshard_sent
stat is not shown in CLUSTER INFO command.
Other changes:
1. Remove useless `needhelp` statements, it was removed in 3dad819.
2. Use `LL_WARNING` log level for some error logs (I/O error, Connection failed).
3. Fix typos that saw by the way.
Add aof_rewrites and rdb_snapshots counters to info.
This is useful to figure our if a rewrite or snapshot happened since last check.
This was part of the (ongoing) effort to provide a safe backup solution for multipart-aof backups.
Modifications of this PR:
1. Support the verification of `Multi Part AOF`, while still maintaining support for the
old-style `AOF/RDB-preamble`. `redis-check-aof` will automatically choose which
mode to use according to the incoming file format.
`Usage: redis-check-aof [--fix|--truncate-to-timestamp $timestamp] <AOF/manifest>`
2. Refactor part of the code to make it easier to understand
3. Currently only supports truncate (`--fix` or `--truncate-to-timestamp`) the last AOF
file (may be `BASE` or `INCR`)
The reasons for 3 above:
- for `--fix`: Only the last AOF may be truncated, this is guaranteed by redis
- for `--truncate-to-timestamp`: Normally, we only have `BASE` + `INCR` files
at most, and `BASE` cannot be truncated(It only contains a timestamp annotation
at the beginning of the file), so only `INCR` can be truncated. If we have a
`BASE+INCR1+INCR2` file (meaning we have an interrupted AOFRW), Only `INCR2`
files can be truncated at this time. If we still insist on truncate `INCR1`, we need to
manually delete `INCR2` and update the manifest file, then re-run `redis-check-aof`
- If we want to support truncate any file, we need to add very complicated code to support
the atomic modification of multiple file deletion and update manifest, I think this is unnecessary
* Drop obsolete initialization calls.
* Use decoder API for DH parameters.
* Enable auto DH parameters if not explicitly used, which should be the
preferred configuration going forward.
