It seems that fix didn't really solve the problem with ASAN,
and also introduced issues with other CI runs.
unrelated:
- make runtest-cluster able to take multiple --single arguments
As Sentinel relies upon consensus algorithm, all sentinel instances,
randomize a time to initiate their next attempt to become the
leader of the group. But time after time, all raffled the same value.
The problem is in the line `srand(time(NULL)^getpid())` such that
all spinned up containers get same time (in seconds) and same pid
which is always 1. Added material `tv_usec` and verify that even
consecutive calls brings different values and makes the difference.
For backwards compatibility in 6.x, channels default permission was set to `allchannels` however with 7.0,
we should modify it and the default value should be `resetchannels` for better security posture.
Also, with selectors in ACL, a client doesn't have to set channel rules everytime and by default
the value will be `resetchannels`.
Before this change
```
127.0.0.1:6379> acl list
1) "user default on nopass ~* &* +@all"
127.0.0.1:6379> acl setuser hp on nopass +@all ~*
OK
127.0.0.1:6379> acl list
1) "user default on nopass ~* &* +@all"
2) "user hp on nopass ~* &* +@all"
127.0.0.1:6379> acl setuser hp1 on nopass -@all (%R~sales*)
OK
127.0.0.1:6379> acl list
1) "user default on nopass ~* &* +@all"
2) "user hp on nopass ~* &* +@all"
3) "user hp1 on nopass &* -@all (%R~sales* &* -@all)"
```
After this change
```
127.0.0.1:6379> acl list
1) "user default on nopass ~* &* +@all"
127.0.0.1:6379> acl setuser hp on nopass +@all ~*
OK
127.0.0.1:6379> acl list
1) "user default on nopass ~* &* +@all"
2) "user hp on nopass ~* resetchannels +@all"
127.0.0.1:6379> acl setuser hp1 on nopass -@all (%R~sales*)
OK
127.0.0.1:6379> acl list
1) "user default on nopass ~* &* +@all"
2) "user hp on nopass ~* resetchannels +@all"
3) "user hp1 on nopass resetchannels -@all (%R~sales* resetchannels -@all)"
```
Add optional `notes` to keyspecs.
Other changes:
1. Remove the "incomplete" flag from SORT and SORT_RO: it is misleading since "incomplete" means "this spec may not return all the keys it describes" but SORT and SORT_RO's specs (except the input key) do not return any keys at all.
So basically:
If a spec's begin_search is "unknown" you should not use it at all, you must use COMMAND KEYS;
if a spec itself is "incomplete", you can use it to get a partial list of keys, but if you want all of them you must use COMMAND GETKEYS;
otherwise, the spec will return all the keys
2. `getKeysUsingKeySpecs` handles incomplete specs internally
Try to fix the rebalance cluster test that's failing with ASAN daily:
Looks like `redis-cli --cluster rebalance` gets `ERR Please use SETSLOT only with masters` in `clusterManagerMoveSlot()`.
it happens when `12-replica-migration-2.tcl` is run with ASAN in GH Actions.
in `Resharding all the master #0 slots away from it`
So the fix (assuming i got it right) is to call `redis-cli --cluster check` before `--cluster rebalance`.
p.s. it looks like a few other checks in these tests needed that wait, added them too.
Other changes:
* in instances.tcl, make sure to catch tcl test crashes and let the rest of the code proceed, so that if there was
a redis crash, we'll find it and print it too.
* redis-cli, try to make sure it prints an error instead of silently exiting.
specifically about redis-cli:
1. clusterManagerMoveSlot used to print an error, only if the caller also asked for it (should be the other way around).
2. clusterManagerCommandReshard asked for an error, but didn't use it (probably tried to avoid the double print).
3. clusterManagerCommandRebalance didn't ask for the error, now it does.
4. making sure that other places in clusterManagerCommandRebalance print something before exiting with an error.
ZADD NX and XX was introduced in 3.0.2, not 6.2.0
ZADD GT and LT was introduced in 6.2.0, not 3.0.2
Add missing `COUNT ANY` history in georadius_ro
Add missing `SHUTDOWN [NOW] [FORCE] [ABORT]` since in shutdown.json
Sentinel tries to resolve instances hostname to IP only during registration.
It might be that the instance is unavailable during that time, such as
leader crashed and failover took place. Yet, promoted replica must support:
- Register leader, even if it fails to resolve its hostname during failover
- Try later to resolve it, if instance is disconnected. Note that
this condition also support ip-change of an instance.
We recently removed capabilities from the first-arg feature of ACL and added a warning.
but we didn't document it.
ref: #10147 and redis/redis-doc#1761
Change the name to unix-time-seconds or unix-time-milliseconds
to be consistent. Change the type from INTEGER to UNIX_TIME.
SET (EXAT and PXAT) was already ok.
and naming aside, both PXAT and EXAT everywhere used unit-time (for both milliseconds and seconds).
the only ones that where wrong are GETEX and XCLAIM (using "integer" for both seconds and milliseconds)
SET is a R+W command, because it can also do `GET` on the data.
SET without GET is a write-only command.
SET with GET is a read+write command.
In #9974, we added ACL to let users define write-only access.
So when the user uses SET with GET option, and the user doesn't
have the READ permission on the key, we need to reject it,
but we rather not reject users with write-only permissions from using
the SET command when they don't use GET.
In this commit, we add a `getkeys_proc` function to control key
flags in SET command. We also add a new key spec flag (VARIABLE_FLAGS)
means that some keys might have different flags depending on arguments.
We also handle BITFIELD command, add a `bitfieldGetKeys` function.
BITFIELD GET is a READ ONLY command.
BITFIELD SET or BITFIELD INCR are READ WRITE commands.
Other changes:
1. SET GET was added in 6.2, add the missing since in set.json
2. Added tests to cover the changes in acl-v2.tcl
3. Fix some typos in server.h and cleanups in acl-v2.tcl
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
This PR attempts to solve two problems that happen sometime in valgrind:
`ERR Background save already in progress`
and
`not bgsave not aborted`
the test used to populate the database with DEBUG, which didn't
increment the dirty counter, so couldn't trigger an automatic bgsave.
then it used a manual bgsave, and aborted it (when it got aborted it
populated the dirty counter), and then it tried to do another bgsave.
that other bgsave could have failed if the automatic one already
started.
Failed on a non-valgrind run. on this line:
```
assert_equal 0 [$slave exists k]
```
the condition in `keyIsExpired` is `now > when`.
so if the test is really fast, maybe it can get to EXISTS exactly 1000 milliseconds after the
expiration was set, and the key isn't yet gone)
This is an attempt to fix some of the issues with the cluster mode tests we are seeing in the daily run.
The test is trying to incrementally adds a bunch of publish messages, expecting that eventually one
of them will overflow. The tests stops one of the processes, so it expects that just that one Redis node
will overflow. I think the test is flaky because under certain circumstances multiple links are getting
disconnected, not just the one that is stalled.
Added the following statistics (per engine) to FUNCTION STATS command:
* number of functions
* number of libraries
Output example:
```
> FUNCTION stats
1) "running_script"
2) (nil)
3) "engines"
4) 1) "LUA"
2) 1) "libraries_count"
2) (integer) 1
3) "functions_count"
4) (integer) 1
```
To collect the stats, added a new dictionary to libraries_ctx that contains
for each engine, the engine statistics representing the current libraries_ctx.
Update the stats on:
1. Link library to libraries_ctx
2. Unlink library from libraries_ctx
3. Flushing libraries_ctx
Set commands.c's merge driver to binary so when it conflicts during a merge git will leave the local version unmodified.
This way our Makefile will rebuild it based on src/commands/*.json before trying to compile it.
Otherwise the file gets modified with merge conflict markers and gets the same timestamp as the *.json files,
so the Makefile doesn't attempt to rebuild it before compiling and we get a compilation error.
This PR aims to improve the flags associated with some commands and adds various tests around
these cases. Specifically, it's concerned with commands which declare keys but have no ACL
flags (think `EXISTS`), the user needs either read or write permission to access this type of key.
This change is primarily concerned around commands in three categories:
# General keyspace commands
These commands are agnostic to the underlying data outside of side channel attacks, so they are not
marked as ACCESS.
* TOUCH
* EXISTS
* TYPE
* OBJECT 'all subcommands'
Note that TOUCH is not a write command, it could be a side effect of either a read or a write command.
# Length and cardinality commands
These commands are marked as NOT marked as ACCESS since they don't return actual user strings,
just metadata.
* LLEN
* STRLEN
* SCARD
* HSTRLEN
# Container has member commands
These commands return information about the existence or metadata about the key. These commands
are NOT marked as ACCESS since the check of membership is used widely in write commands
e.g. the response of HSET.
* SISMEMBER
* HEXISTS
# Intersection cardinality commands
These commands are marked as ACCESS since they process data to compute the result.
* PFCOUNT
* ZCOUNT
* ZINTERCARD
* SINTERCARD
* Refactor EVAL timeout test
* since the test used r config set appendonly yes which generates a rewrite, it missed it's purpose
* Fix the bug that start_server returns before redis starts ready, which affects when multiple tests share the same dir.
* Elapsed time tracking no loner needed
Co-authored-by: Oran Agra <oran@redislabs.com>
For some complex data types, server.dirty actually counts
the number of elements that have been changed.
And in FLUSHDB or FLUSHALL, we count the number of keys.
So the word "key" is not strictly correct and is outdated.
Some discussion can be seen at #8140.
In #10025 we added a mechanism for flagging certain properties for Redis Functions.
This lead us to think we'd like to "port" this mechanism to Redis Scripts (`EVAL`) as well.
One good reason for this, other than the added functionality is because it addresses the
poor behavior we currently have in `EVAL` in case the script performs a (non DENY_OOM) write operation
during OOM state. See #8478 (And a previous attempt to handle it via #10093) for details.
Note that in Redis Functions **all** write operations (including DEL) will return an error during OOM state
unless the function is flagged as `allow-oom` in which case no OOM checking is performed at all.
This PR:
- Enables setting `EVAL` (and `SCRIPT LOAD`) script flags as defined in #10025.
- Provides a syntactical framework via [shebang](https://en.wikipedia.org/wiki/Shebang_(Unix)) for
additional script annotations and even engine selection (instead of just lua) for scripts.
- Provides backwards compatibility so scripts without the new annotations will behave as they did before.
- Appropriate tests.
- Changes `EVAL[SHA]/_RO` to be flagged as `STALE` commands. This makes it possible to flag individual
scripts as `allow-stale` or not flag them as such. In backwards compatibility mode these commands will
return the `MASTERDOWN` error as before.
- Changes `SCRIPT LOAD` to be flagged as a `STALE` command. This is mainly to make it logically
compatible with the change to `EVAL` in the previous point. It enables loading a script on a stale server
which is technically okay it doesn't relate directly to the server's dataset. Running the script does, but that
won't work unless the script is explicitly marked as `allow-stale`.
Note that even though the LUA syntax doesn't support hash tag comments `.lua` files do support a shebang
tag on the top so they can be executed on Unix systems like any shell script. LUA's `luaL_loadfile` handles
this as part of the LUA library. In the case of `luaL_loadbuffer`, which is what Redis uses, I needed to fix the
input script in case of a shebang manually. I did this the same way `luaL_loadfile` does, by replacing the
first line with a single line feed character.
The keyspec API is not yet released and there is a plan to change it
in #10108, which is going to be included in RC2. Therefore, we hide
it in RC1 to avoid introducing a breaking change in RC2.
Co-authored-by: Oran Agra <oran@redislabs.com>
* Fix flaky cluster test "Disconnect link when send buffer limit reached"
* Fix flaky cluster test "Each node has two links with each peer"
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
A test failure was reported in Daily CI (test-centos7-tls).
`CKQUORUM detects failover authorization cannot be reached`.
```
CKQUORUM detects failover authorization cannot be reached: FAILED:
Expected 'invalid command name "OK 4 usable Sentinels. Quorum and failover authorization can be reached"' to match '*NOQUORUM*'
```
It seems that current sentinel does not confirm that the other
sentinels are actually `down`, and then check the quorum.
It at least take 3 seconds on my machine, and we can see there
will be a timing issue with the hard code `after 5000`.
In this commit, we check the response of `SENTINEL SENTINELS mymaster`
to ensure that other sentinels are actually `down` in the view the
current sentinel. Solve the timing issue due to sentinel monitor mechanism.
Summary of changes:
1. Rename `redisCommand->name` to `redisCommand->declared_name`, it is a
const char * for native commands and SDS for module commands.
2. Store the [sub]command fullname in `redisCommand->fullname` (sds).
3. List subcommands in `ACL CAT`
4. List subcommands in `COMMAND LIST`
5. `moduleUnregisterCommands` now will also free the module subcommands.
6. RM_GetCurrentCommandName returns full command name
Other changes:
1. Add `addReplyErrorArity` and `addReplyErrorExpireTime`
2. Remove `getFullCommandName` function that now is useless.
3. Some cleanups about `fullname` since now it is SDS.
4. Delete `populateSingleCommand` function from server.h that is useless.
5. Added tests to cover this change.
6. Add some module unload tests and fix the leaks
7. Make error messages uniform, make sure they always contain the full command
name and that it's quoted.
7. Fixes some typos
see the history in #9504, fixes#10124
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: guybe7 <guy.benoish@redislabs.com>
Recently we added extensive support for sub-commands in for redis 7.0,
this meant that the old ACL mechanism for
sub-commands wasn't needed, or actually was improved (to handle both include
and exclude control, like for commands), but only for real sub-commands.
The old mechanism in ACL was renamed to first-arg, and was able to match the
first argument of any command (including sub-commands).
We now realized that we might wanna completely delete that first-arg feature some
day, so the first step was not to give it new capabilities in 7.0 and it didn't have before.
Changes:
1. ACL: Block the first-arg mechanism on subcommands (we keep if in non-subcommands
for backward compatibility)
2. COMMAND: When looking up a command, insist the command name doesn't contain
extra words. Example: When a user issues `GET key` we want `lookupCommand` to return
`getCommand` but when if COMMAND calls `lookupCommand` with `get|key` we want it to fail.
Other changes:
1. ACLSetUser: prevent a redundant command lookup
* Implemented selectors which provide multiple different sets of permissions to users
* Implemented key based permissions
* Added a new ACL dry-run command to test permissions before execution
* Updated module APIs to support checking key based permissions
Co-authored-by: Oran Agra <oran@redislabs.com>
Adding command tips (see https://redis.io/topics/command-tips) to commands.
Breaking changes:
1. Removed the "random" and "sort_for_script" flags. They are now command tips.
(this isn't affecting redis behavior since #9812, but could affect some client applications
that's relying on COMMAND command flags)
Summary of changes:
1. add BLOCKING flag (new flag) for all commands that could block. The ACL category with
the same name is now implicit.
2. move RANDOM flag to a `nondeterministic_output` tip
3. move SORT_FOR_SCRIPT flag to `nondeterministic_output_order` tip
3. add REQUEST_POLICY and RESPONSE_POLICY where appropriate as documented in the tips
4. deprecate (ignore) the `random` flag for RM_CreateCommand
Other notes:
1. Proxies need to send `RANDOMKEY` to all shards and then select one key randomly.
The other option is to pick a random shard and transfer `RANDOMKEY `to it, but that scheme
fails if this specific shard is empty
2. Remove CMD_RANDOM from `XACK` (i.e. XACK does not have RANDOM_OUTPUT)
It was added in 9e4fb96ca1, I guess by mistake.
Also from `(P)EXPIRETIME` (new command, was flagged "random" by mistake).
3. Add `nondeterministic_output` to `OBJECT ENCODING` (for the same reason `XTRIM` has it:
the reply may differ depending on the internal representation in memory)
4. RANDOM on `HGETALL` was wrong (there due to a limitation of the old script sorting logic), now
it's `nondeterministic_output_order`
5. Unrelated: Hide CMD_PROTECTED from COMMAND
The PR added the missing verification for functions on redis-check-rdb.
The verification only verifies the rdb structure and does not try to load the functions code and
verify more advance checks (like compilation of the function code).
Some modules might perform a long-running logic in different stages of Redis lifetime, for example:
* command execution
* RDB loading
* thread safe context
During this long-running logic Redis is not responsive.
This PR offers
1. An API to process events while a busy command is running (`RM_Yield`)
2. A new flag (`ALLOW_BUSY`) to mark the commands that should be handled during busy
jobs which can also be used by modules (`allow-busy`)
3. In slow commands and thread safe contexts, this flag will start rejecting commands with -BUSY only
after `busy-reply-threshold`
4. During loading (`rdb_load` callback), it'll process events right away (not wait for `busy-reply-threshold`),
but either way, the processing is throttled to the server hz rate.
5. Allow modules to Yield to redis background tasks, but not to client commands
* rename `script-time-limit` to `busy-reply-threshold` (an alias to the pre-7.0 `lua-time-limit`)
Co-authored-by: Oran Agra <oran@redislabs.com>
Function PR was merged without AOF rw support because we thought this feature was going
to be removed on Redis 7.
Tests was added on aofrw.tcl
Other existing aofrw tests where slow due to unwanted rdb-key-save-delay
Co-authored-by: Oran Agra <oran@redislabs.com>
In #10122, we modify the key spec flags to `RO` and `ACCESS`.
But forgot to call generate-command-code.py. Also formatted
it to follow the Python PEP8.
