This case is interesting because it originates from cron,
rather than from another command.
The idea came from looking at #9890 and #10573, and I was wondering if RM_Call
would work properly when `server.current_client == NULL`
RM_Yield was missing a call to protectClient to prevent redis from
processing future commands of the yielding client.
Adding tests that fail without this fix.
This would be complicated to solve since nested calls to RM_Call used to
replace the current_client variable with the module temp client.
It looks like it's no longer necessary to do that, since it was added
back in #9890 to solve two issues, both already gone:
1. call to CONFIG SET maxmemory could trigger a module hook calling
RM_Call. although this specific issue is gone, arguably other hooks
like keyspace notification, can do the same.
2. an assertion in lookupKey that checks the current command of the
current client, introduced in #9572 and removed in #10248
since PUBLISH and SPUBLISH use different dictionaries for channels and clients,
and we already have an API for PUBLISH, it only makes sense to have one for SPUBLISH
Add test coverage and unifying some test infrastructure.
Add APIs to allow modules to compute the memory consumption of opaque objects owned by redis.
Without these, the mem_usage callbacks of module data types are useless in many cases.
Other changes:
Fix streamRadixTreeMemoryUsage to include the size of the rax structure itself
By the convention of errors, there is supposed to be a space between the code and the name.
While looking at some lua stuff I noticed that interpreter errors were not adding the space,
so some clients will try to map the detailed error message into the error.
We have tests that hit this condition, but they were just checking that the string "starts" with ERR.
I updated some other tests with similar incorrect string checking. This isn't complete though, as
there are other ways we check for ERR I didn't fix.
Produces some fun output like:
```
# Errorstats
errorstat_ERR:count=1
errorstat_ERRuser_script_1_:count=1
```
Allow specifying an ACL log reason, which is shown in the log. Right now it always shows "unknown", which is a little bit cryptic. This is a breaking change, but this API was added as part of 7 so it seems ok to stabilize it still.
Add field to COMMAND DOCS response to denote the name of the module
that added that command.
COMMAND LIST can filter by module, but if you get the full commands list,
you may still wanna know which command belongs to which module.
The alternative would be to do MODULE LIST, and then multiple calls to COMMAND LIST
The bug was when using REDISMODULE_YIELD_FLAG_CLIENTS.
in that case we would have only set the CLIENTS type flag in
server.busy_module_yield_flags and then clear that flag when exiting
RM_Yield, so we would never call unblockPostponedClients when the
context is destroyed.
This didn't really have any actual implication, which is why the tests
couldn't (and still can't) find that since the bug only happens when
using CLIENT, but in this case we won't have any clients to un-postpone
i.e. clients will get rejected with BUSY error, rather than being
postponed.
Unrelated:
* Adding tests for nested contexts, just in case.
* Avoid nested RM_Yield calls
Fix global `strval` not reset to NULL after being freed, causing a crash on alpine
(most likely because the dynamic library loader doesn't init globals on reload)
By the way, fix the memory leak of using `RedisModule_Free` to free `RedisModuleString`,
and add a corresponding test.
This feature adds the ability to add four different types (Bool, Numeric,
String, Enum) of configurations to a module to be accessed via the redis
config file, and the CONFIG command.
**Configuration Names**:
We impose a restriction that a module configuration always starts with the
module name and contains a '.' followed by the config name. If a module passes
"config1" as the name to a register function, it will be registered as MODULENAME.config1.
**Configuration Persistence**:
Module Configurations exist only as long as a module is loaded. If a module is
unloaded, the configurations are removed.
There is now also a minimal core API for removal of standardConfig objects
from configs by name.
**Get and Set Callbacks**:
Storage of config values is owned by the module that registers them, and provides
callbacks for Redis to access and manipulate the values.
This is exposed through a GET and SET callback.
The get callback returns a typed value of the config to redis. The callback takes
the name of the configuration, and also a privdata pointer. Note that these only
take the CONFIGNAME portion of the config, not the entire MODULENAME.CONFIGNAME.
```
typedef RedisModuleString * (*RedisModuleConfigGetStringFunc)(const char *name, void *privdata);
typedef long long (*RedisModuleConfigGetNumericFunc)(const char *name, void *privdata);
typedef int (*RedisModuleConfigGetBoolFunc)(const char *name, void *privdata);
typedef int (*RedisModuleConfigGetEnumFunc)(const char *name, void *privdata);
```
Configs must also must specify a set callback, i.e. what to do on a CONFIG SET XYZ 123
or when loading configurations from cli/.conf file matching these typedefs. *name* is
again just the CONFIGNAME portion, *val* is the parsed value from the core,
*privdata* is the registration time privdata pointer, and *err* is for providing errors to a client.
```
typedef int (*RedisModuleConfigSetStringFunc)(const char *name, RedisModuleString *val, void *privdata, RedisModuleString **err);
typedef int (*RedisModuleConfigSetNumericFunc)(const char *name, long long val, void *privdata, RedisModuleString **err);
typedef int (*RedisModuleConfigSetBoolFunc)(const char *name, int val, void *privdata, RedisModuleString **err);
typedef int (*RedisModuleConfigSetEnumFunc)(const char *name, int val, void *privdata, RedisModuleString **err);
```
Modules can also specify an optional apply callback that will be called after
value(s) have been set via CONFIG SET:
```
typedef int (*RedisModuleConfigApplyFunc)(RedisModuleCtx *ctx, void *privdata, RedisModuleString **err);
```
**Flags:**
We expose 7 new flags to the module, which are used as part of the config registration.
```
#define REDISMODULE_CONFIG_MODIFIABLE 0 /* This is the default for a module config. */
#define REDISMODULE_CONFIG_IMMUTABLE (1ULL<<0) /* Can this value only be set at startup? */
#define REDISMODULE_CONFIG_SENSITIVE (1ULL<<1) /* Does this value contain sensitive information */
#define REDISMODULE_CONFIG_HIDDEN (1ULL<<4) /* This config is hidden in `config get <pattern>` (used for tests/debugging) */
#define REDISMODULE_CONFIG_PROTECTED (1ULL<<5) /* Becomes immutable if enable-protected-configs is enabled. */
#define REDISMODULE_CONFIG_DENY_LOADING (1ULL<<6) /* This config is forbidden during loading. */
/* Numeric Specific Configs */
#define REDISMODULE_CONFIG_MEMORY (1ULL<<7) /* Indicates if this value can be set as a memory value */
```
**Module Registration APIs**:
```
int (*RedisModule_RegisterBoolConfig)(RedisModuleCtx *ctx, char *name, int default_val, unsigned int flags, RedisModuleConfigGetBoolFunc getfn, RedisModuleConfigSetBoolFunc setfn, RedisModuleConfigApplyFunc applyfn, void *privdata);
int (*RedisModule_RegisterNumericConfig)(RedisModuleCtx *ctx, const char *name, long long default_val, unsigned int flags, long long min, long long max, RedisModuleConfigGetNumericFunc getfn, RedisModuleConfigSetNumericFunc setfn, RedisModuleConfigApplyFunc applyfn, void *privdata);
int (*RedisModule_RegisterStringConfig)(RedisModuleCtx *ctx, const char *name, const char *default_val, unsigned int flags, RedisModuleConfigGetStringFunc getfn, RedisModuleConfigSetStringFunc setfn, RedisModuleConfigApplyFunc applyfn, void *privdata);
int (*RedisModule_RegisterEnumConfig)(RedisModuleCtx *ctx, const char *name, int default_val, unsigned int flags, const char **enum_values, const int *int_values, int num_enum_vals, RedisModuleConfigGetEnumFunc getfn, RedisModuleConfigSetEnumFunc setfn, RedisModuleConfigApplyFunc applyfn, void *privdata);
int (*RedisModule_LoadConfigs)(RedisModuleCtx *ctx);
```
The module name will be auto appended along with a "." to the front of the name of the config.
**What RM_Register[...]Config does**:
A RedisModule struct now keeps a list of ModuleConfig objects which look like:
```
typedef struct ModuleConfig {
sds name; /* Name of config without the module name appended to the front */
void *privdata; /* Optional data passed into the module config callbacks */
union get_fn { /* The get callback specificed by the module */
RedisModuleConfigGetStringFunc get_string;
RedisModuleConfigGetNumericFunc get_numeric;
RedisModuleConfigGetBoolFunc get_bool;
RedisModuleConfigGetEnumFunc get_enum;
} get_fn;
union set_fn { /* The set callback specified by the module */
RedisModuleConfigSetStringFunc set_string;
RedisModuleConfigSetNumericFunc set_numeric;
RedisModuleConfigSetBoolFunc set_bool;
RedisModuleConfigSetEnumFunc set_enum;
} set_fn;
RedisModuleConfigApplyFunc apply_fn;
RedisModule *module;
} ModuleConfig;
```
It also registers a standardConfig in the configs array, with a pointer to the
ModuleConfig object associated with it.
**What happens on a CONFIG GET/SET MODULENAME.MODULECONFIG:**
For CONFIG SET, we do the same parsing as is done in config.c and pass that
as the argument to the module set callback. For CONFIG GET, we call the
module get callback and return that value to config.c to return to a client.
**CONFIG REWRITE**:
Starting up a server with module configurations in a .conf file but no module load
directive will fail. The flip side is also true, specifying a module load and a bunch
of module configurations will load those configurations in using the module defined
set callbacks on a RM_LoadConfigs call. Configs being rewritten works the same
way as it does for standard configs, as the module has the ability to specify a
default value. If a module is unloaded with configurations specified in the .conf file
those configurations will be commented out from the .conf file on the next config rewrite.
**RM_LoadConfigs:**
`RedisModule_LoadConfigs(RedisModuleCtx *ctx);`
This last API is used to make configs available within the onLoad() after they have
been registered. The expected usage is that a module will register all of its configs,
then call LoadConfigs to trigger all of the set callbacks, and then can error out if any
of them were malformed. LoadConfigs will attempt to set all configs registered to
either a .conf file argument/loadex argument or their default value if an argument is
not specified. **LoadConfigs is a required function if configs are registered.
** Also note that LoadConfigs **does not** call the apply callbacks, but a module
can do that directly after the LoadConfigs call.
**New Command: MODULE LOADEX [CONFIG NAME VALUE] [ARGS ...]:**
This command provides the ability to provide startup context information to a module.
LOADEX stands for "load extended" similar to GETEX. Note that provided config
names need the full MODULENAME.MODULECONFIG name. Any additional
arguments a module might want are intended to be specified after ARGS.
Everything after ARGS is passed to onLoad as RedisModuleString **argv.
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Madelyn Olson <matolson@amazon.com>
Co-authored-by: sundb <sundbcn@gmail.com>
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
The PR extends RM_Call with 3 new capabilities using new flags that
are given to RM_Call as part of the `fmt` argument.
It aims to assist modules that are getting a list of commands to be
executed from the user (not hard coded as part of the module logic),
think of a module that implements a new scripting language...
* `S` - Run the command in a script mode, this means that it will raise an
error if a command which are not allowed inside a script (flaged with the
`deny-script` flag) is invoked (like SHUTDOWN). In addition, on script mode,
write commands are not allowed if there is not enough good replicas (as
configured with `min-replicas-to-write`) and/or a disk error happened.
* `W` - no writes mode, Redis will reject any command that is marked with `write`
flag. Again can be useful to modules that implement a new scripting language
and wants to prevent any write commands.
* `E` - Return errors as RedisModuleCallReply. Today the errors that happened
before the command was invoked (like unknown commands or acl error) return
a NULL reply and set errno. This might be missing important information about
the failure and it is also impossible to just pass the error to the user using
RM_ReplyWithCallReply. This new flag allows you to get a RedisModuleCallReply
object with the relevant error message and treat it as if it was an error that was
raised by the command invocation.
Tests were added to verify the new code paths.
In addition small refactoring was done to share some code between modules,
scripts, and `processCommand` function:
1. `getAclErrorMessage` was added to `acl.c` to unified to log message extraction
from the acl result
2. `checkGoodReplicasStatus` was added to `replication.c` to check the status of
good replicas. It is used on `scriptVerifyWriteCommandAllow`, `RM_Call`, and
`processCommand`.
3. `writeCommandsGetDiskErrorMessage` was added to `server.c` to get the error
message on persistence failure. Again it is used on `scriptVerifyWriteCommandAllow`,
`RM_Call`, and `processCommand`.
When ::singledb is 0, we will use db 9 for the test db.
Since ::singledb is set to 1 in the cluster-related tests, but not restored, some subsequent
tests associated with db 9 will fail.
The new module redact test will fail with valgrind:
```
[err]: modules can redact arguments in tests/unit/moduleapi/auth.tcl
Expected 'slowlog reset' to be equal to 'auth.redact 1 (redacted) 3 (redacted)' (context: type eval line 12 cmd {assert_equal {slowlog reset} [lindex [lindex [r slowlog get] 2] 3]} proc ::test)
```
The reason is that with `slowlog-log-slower-than 10000`,
`slowlog get` will have a chance to exceed 10ms.
Made two changes to avoid failure:
1. change `slowlog-log-slower-than` from 10000 to -1, distable it.
2. assert to use the previous execution result.
In theory, the second one can actually be left unchanged, but i
think it will be better if it is changed.
Deleting a stream while a client is blocked XREADGROUP should unblock the client.
The idea is that if a client is blocked via XREADGROUP is different from
any other blocking type in the sense that it depends on the existence of both
the key and the group. Even if the key is deleted and then revived with XADD
it won't help any clients blocked on XREADGROUP because the group no longer
exist, so they would fail with -NOGROUP anyway.
The conclusion is that it's better to unblock these clients (with error) upon
the deletion of the key, rather than waiting for the first XADD.
Other changes:
1. Slightly optimize all `serveClientsBlockedOn*` functions by checking `server.blocked_clients_by_type`
2. All `serveClientsBlockedOn*` functions now use a list iterator rather than looking at `listFirst`, relying
on `unblockClient` to delete the head of the list. Before this commit, only `serveClientsBlockedOnStreams`
used to work like that.
3. bugfix: CLIENT UNBLOCK ERROR should work even if the command doesn't have a timeout_callback
(only relevant to module commands)
This implements the following main pieces of functionality:
* Renames key spec "CHANNEL" to be "NOT_KEY", and update the documentation to
indicate it's for cluster routing and not for any other key related purpose.
* Add the getchannels-api, so that modules can now define commands that are subject to
ACL channel permission checks.
* Add 4 new flags that describe how a module interacts with a command (SUBSCRIBE, PUBLISH,
UNSUBSCRIBE, and PATTERN). They are all technically composable, however not sure how a
command could both subscribe and unsubscribe from a command at once, but didn't see
a reason to add explicit validation there.
* Add two new module apis RM_ChannelAtPosWithFlags and RM_IsChannelsPositionRequest to
duplicate the functionality provided by the keys position APIs.
* The RM_ACLCheckChannelPermissions (only released in 7.0 RC1) was changed to take flags
rather than a boolean literal.
* The RM_ACLCheckKeyPermissions (only released in 7.0 RC1) was changed to take flags
corresponding to keyspecs instead of custom permission flags. These keyspec flags mimic
the flags for ACLCheckChannelPermissions.
This is a followup work for #10278, and a discussion about #10279
The changes:
- fix failed_calls in command stats for blocked clients that got error.
including CLIENT UNBLOCK, and module replying an error from a thread.
- fix latency stats for XREADGROUP that filed with -NOGROUP
Theory behind which errors should be counted:
- error stats represents errors returned to the user, so an error handled by a
module should not be counted.
- total error counter should be the same.
- command stats represents execution of commands (even with RM_Call, and if
they fail or get rejected it counts these calls in commandstats, so it should
also count failed_calls)
Some thoughts about Scripts:
for scripts it could be different since they're part of user code, not the infra (not an extension to redis)
we certainly want commandstats to contain all calls and errors
a simple script is like mult-exec transaction so an error inside it should be counted in error stats
a script that replies with an error to the user (using redis.error_reply) should also be counted in error stats
but then the problem is that a plain `return redis.call("SET")` should not be counted twice (once for the SET
and once for EVAL)
so that's something left to be resolved in #10279
This PR handles several aspects
1. Calls to RM_ReplyWithError from thread safe contexts don't violate thread safety.
2. Errors returning from RM_Call to the module aren't counted in the statistics (they
might be handled silently by the module)
3. When a module propagates a reply it got from RM_Call to it's client, then the error
statistics are counted.
This is done by:
1. When appending an error reply to the output buffer, we avoid updating the global
error statistics, instead we cache that error in a deferred list in the client struct.
2. When creating a RedisModuleCallReply object, the deferred error list is moved from
the client into that object.
3. when a module calls RM_ReplyWithCallReply we copy the deferred replies to the dest
client (if that's a real client, then that's when the error statistics are updated to the server)
Note about RM_ReplyWithCallReply: if the original reply had an array with errors, and the module
replied with just a portion of the original reply, and not the entire reply, the errors are currently not
propagated and the errors stats will not get propagated.
Fix#10180
The bug is introduced by #9323. (released in 7.0 RC1)
The define of `REDISMODULE_OPTIONS_HANDLE_IO_ERRORS` and `REDISMODULE_OPTION_NO_IMPLICIT_SIGNAL_MODIFIED` have the same value.
This will result in skipping `signalModifiedKey()` after `RM_CloseKey()` if the module has set
`REDISMODULE_OPTIONS_HANDLE_REPL_ASYNC_LOAD` option.
The implication is missing WATCH and client side tracking invalidations.
Other changes:
- add `no-implicit-signal-modified` to the options in INFO modules
Co-authored-by: Oran Agra <oran@redislabs.com>
This is an enhancement for INFO command, previously INFO only support one argument
for different info section , if user want to get more categories information, either perform
INFO all / default or calling INFO for multiple times.
**Description of the feature**
The goal of adding this feature is to let the user retrieve multiple categories via the INFO
command, and still avoid emitting the same section twice.
A use case for this is like Redis Sentinel, which periodically calling INFO command to refresh
info from monitored Master/Slaves, only Server and Replication part categories are used for
parsing information. If the INFO command can return just enough categories that client side
needs, it can save a lot of time for client side parsing it as well as network bandwidth.
**Implementation**
To share code between redis, sentinel, and other users of INFO (DEBUG and modules),
we have a new `genInfoSectionDict` function that returns a dict and some boolean flags
(e.g. `all`) to the caller (built from user input).
Sentinel is later purging unwanted sections from that, and then it is forwarded to the info `genRedisInfoString`.
**Usage Examples**
INFO Server Replication
INFO CPU Memory
INFO default commandstats
Co-authored-by: Oran Agra <oran@redislabs.com>
- add COMMAND GETKEYSANDFLAGS sub-command
- add RM_KeyAtPosWithFlags and GetCommandKeysWithFlags
- RM_KeyAtPos and RM_CreateCommand set flags requiring full access for keys
- RM_CreateCommand set VARIABLE_FLAGS
- expose `variable_flags` flag in COMMAND INFO key-specs
- getKeysFromCommandWithSpecs prefers key-specs over getkeys-api
- add tests for all of these
If summary or since is empty, we used to return NULL in
COMMAND DOCS. Currently all redis commands will have these
two fields.
But not for module command, summary and since are optional
for RM_SetCommandInfo. With the change in #10043, if a module
command doesn't have the summary or since, redis-cli will
crash (see #10250).
In this commit, COMMAND DOCS avoid adding summary or since
when they are missing.
Adds RM_SetCommandInfo, allowing modules to provide the following command info:
* summary
* complexity
* since
* history
* hints
* arity
* key specs
* args
This information affects the output of `COMMAND`, `COMMAND INFO` and `COMMAND DOCS`,
Cluster, ACL and is used to filter commands with the wrong number of arguments before
the call reaches the module code.
The recently added API functions for key specs (never released) are removed.
A minimalist example would look like so:
```c
RedisModuleCommand *mycmd = RedisModule_GetCommand(ctx,"mymodule.mycommand");
RedisModuleCommandInfo mycmd_info = {
.version = REDISMODULE_COMMAND_INFO_VERSION,
.arity = -5,
.summary = "some description",
};
if (RedisModule_SetCommandInfo(mycmd, &mycmd_info) == REDISMODULE_ERR)
return REDISMODULE_ERR;
````
Notes:
* All the provided information (including strings) is copied, not keeping references to the API input data.
* The version field is actually a static struct that contains the sizes of the the structs used in arrays,
so we can extend these in the future and old version will still be able to take the part they can support.
This is done to avoid a crash when the timer fires after the module was unloaded.
Or memory leaks in case we wanted to just ignore the timer.
It'll cause the MODULE UNLOAD command to return with an error
Co-authored-by: sundb <sundbcn@gmail.com>
SET is a R+W command, because it can also do `GET` on the data.
SET without GET is a write-only command.
SET with GET is a read+write command.
In #9974, we added ACL to let users define write-only access.
So when the user uses SET with GET option, and the user doesn't
have the READ permission on the key, we need to reject it,
but we rather not reject users with write-only permissions from using
the SET command when they don't use GET.
In this commit, we add a `getkeys_proc` function to control key
flags in SET command. We also add a new key spec flag (VARIABLE_FLAGS)
means that some keys might have different flags depending on arguments.
We also handle BITFIELD command, add a `bitfieldGetKeys` function.
BITFIELD GET is a READ ONLY command.
BITFIELD SET or BITFIELD INCR are READ WRITE commands.
Other changes:
1. SET GET was added in 6.2, add the missing since in set.json
2. Added tests to cover the changes in acl-v2.tcl
3. Fix some typos in server.h and cleanups in acl-v2.tcl
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
The keyspec API is not yet released and there is a plan to change it
in #10108, which is going to be included in RC2. Therefore, we hide
it in RC1 to avoid introducing a breaking change in RC2.
Co-authored-by: Oran Agra <oran@redislabs.com>
Summary of changes:
1. Rename `redisCommand->name` to `redisCommand->declared_name`, it is a
const char * for native commands and SDS for module commands.
2. Store the [sub]command fullname in `redisCommand->fullname` (sds).
3. List subcommands in `ACL CAT`
4. List subcommands in `COMMAND LIST`
5. `moduleUnregisterCommands` now will also free the module subcommands.
6. RM_GetCurrentCommandName returns full command name
Other changes:
1. Add `addReplyErrorArity` and `addReplyErrorExpireTime`
2. Remove `getFullCommandName` function that now is useless.
3. Some cleanups about `fullname` since now it is SDS.
4. Delete `populateSingleCommand` function from server.h that is useless.
5. Added tests to cover this change.
6. Add some module unload tests and fix the leaks
7. Make error messages uniform, make sure they always contain the full command
name and that it's quoted.
7. Fixes some typos
see the history in #9504, fixes#10124
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: guybe7 <guy.benoish@redislabs.com>
* Implemented selectors which provide multiple different sets of permissions to users
* Implemented key based permissions
* Added a new ACL dry-run command to test permissions before execution
* Updated module APIs to support checking key based permissions
Co-authored-by: Oran Agra <oran@redislabs.com>
Some modules might perform a long-running logic in different stages of Redis lifetime, for example:
* command execution
* RDB loading
* thread safe context
During this long-running logic Redis is not responsive.
This PR offers
1. An API to process events while a busy command is running (`RM_Yield`)
2. A new flag (`ALLOW_BUSY`) to mark the commands that should be handled during busy
jobs which can also be used by modules (`allow-busy`)
3. In slow commands and thread safe contexts, this flag will start rejecting commands with -BUSY only
after `busy-reply-threshold`
4. During loading (`rdb_load` callback), it'll process events right away (not wait for `busy-reply-threshold`),
but either way, the processing is throttled to the server hz rate.
5. Allow modules to Yield to redis background tasks, but not to client commands
* rename `script-time-limit` to `busy-reply-threshold` (an alias to the pre-7.0 `lua-time-limit`)
Co-authored-by: Oran Agra <oran@redislabs.com>
The new ACL key based permissions in #9974 require the key-specs (#8324) to have more
explicit flags rather than just READ and WRITE. See discussion in #10040
This PR defines two groups of flags:
One about how redis internally handles the key (mutually-exclusive).
The other is about the logical operation done from the user's point of view (3 mutually exclusive
write flags, and one read flag, all optional).
In both groups, if we can't explicitly flag something as explicit read-only, delete-only, or
insert-only, we flag it as `RW` or `UPDATE`.
here's the definition from the code:
```
/* Key-spec flags *
* -------------- */
/* The following refer what the command actually does with the value or metadata
* of the key, and not necessarily the user data or how it affects it.
* Each key-spec may must have exaclty one of these. Any operation that's not
* distinctly deletion, overwrite or read-only would be marked as RW. */
#define CMD_KEY_RO (1ULL<<0) /* Read-Only - Reads the value of the key, but
* doesn't necessarily returns it. */
#define CMD_KEY_RW (1ULL<<1) /* Read-Write - Modifies the data stored in the
* value of the key or its metadata. */
#define CMD_KEY_OW (1ULL<<2) /* Overwrite - Overwrites the data stored in
* the value of the key. */
#define CMD_KEY_RM (1ULL<<3) /* Deletes the key. */
/* The follwing refer to user data inside the value of the key, not the metadata
* like LRU, type, cardinality. It refers to the logical operation on the user's
* data (actual input strings / TTL), being used / returned / copied / changed,
* It doesn't refer to modification or returning of metadata (like type, count,
* presence of data). Any write that's not INSERT or DELETE, would be an UPADTE.
* Each key-spec may have one of the writes with or without access, or none: */
#define CMD_KEY_ACCESS (1ULL<<4) /* Returns, copies or uses the user data from
* the value of the key. */
#define CMD_KEY_UPDATE (1ULL<<5) /* Updates data to the value, new value may
* depend on the old value. */
#define CMD_KEY_INSERT (1ULL<<6) /* Adds data to the value with no chance of,
* modification or deletion of existing data. */
#define CMD_KEY_DELETE (1ULL<<7) /* Explicitly deletes some content
* from the value of the key. */
```
Unrelated changes:
- generate-command-code.py is only compatible with python3 (modified the shabang)
- generate-command-code.py print file on json parsing error
- rename `shard_channel` key-spec flag to just `channel`.
- add INCOMPLETE flag in input spec of SORT and SORT_RO
Modules can now register sockets/pipe to the Redis main thread event loop and do network operations asynchronously. Previously, modules had to maintain an event loop and another thread for asynchronous network operations.
Also, if a module is calling API functions after doing some network operations, it had to synchronize its event loop thread's access with Redis main thread by locking the GIL, causing contention on the lock. After this commit, no synchronization is needed as module can operate in Redis main thread context. So, this commit may improve the performance for some use cases.
Added three functions to the module API:
* RedisModule_EventLoopAdd(int fd, int mask, RedisModuleEventLoopFunc func, void *user_data)
* RedisModule_EventLoopDel(int fd, int mask)
* RedisModule_EventLoopAddOneShot(RedisModuleEventLoopOneShotFunc func, void *user_data) - This function can be called from other threads to trigger callback on Redis main thread. Callback will be triggered only once. If Redis main thread is sleeping, this call will wake up the Redis main thread.
Event loop callbacks are called by Redis main thread after locking the GIL. Inside callbacks, modules can operate as if they are holding the GIL.
Added REDISMODULE_EVENT_EVENTLOOP event with two subevents:
* REDISMODULE_SUBEVENT_EVENTLOOP_BEFORE_SLEEP
* REDISMODULE_SUBEVENT_EVENTLOOP_AFTER_SLEEP
These events are for modules that want to participate in the before and after sleep action. e.g It might be useful to implement batching : Read data from the network, write all to a file in one go on BEFORE_SLEEP event.
1. enable diskless replication by default
2. add a new config named repl-diskless-sync-max-replicas that enables
replication to start before the full repl-diskless-sync-delay was
reached.
3. put replica online sooner on the master (see below)
4. test suite uses repl-diskless-sync-delay of 0 to be faster
5. a few tests that use multiple replica on a pre-populated master, are
now using the new repl-diskless-sync-max-replicas
6. fix possible timing issues in a few cluster tests (see below)
put replica online sooner on the master
----------------------------------------------------
there were two tests that failed because they needed for the master to
realize that the replica is online, but the test code was actually only
waiting for the replica to realize it's online, and in diskless it could
have been before the master realized it.
changes include two things:
1. the tests wait on the right thing
2. issues in the master, putting the replica online in two steps.
the master used to put the replica as online in 2 steps. the first
step was to mark it as online, and the second step was to enable the
write event (only after getting ACK), but in fact the first step didn't
contains some of the tasks to put it online (like updating good slave
count, and sending the module event). this meant that if a test was
waiting to see that the replica is online form the point of view of the
master, and then confirm that the module got an event, or that the
master has enough good replicas, it could fail due to timing issues.
so now the full effect of putting the replica online, happens at once,
and only the part about enabling the writes is delayed till the ACK.
fix cluster tests
--------------------
I added some code to wait for the replica to sync and avoid race
conditions.
later realized the sentinel and cluster tests where using the original 5
seconds delay, so changed it to 0.
this means the other changes are probably not needed, but i suppose
they're still better (avoid race conditions)
Force create a BASE file (use a foreground `rewriteAppendOnlyFile`) when redis starts from an
empty data set and `appendonly` is yes.
The reasoning is that normally, after redis is running for some time, and the AOF has gone though
a few rewrites, there's always a base rdb file. and the scenario where the base file is missing, is
kinda rare (happens only at empty startup), so this change normalizes it.
But more importantly, there are or could be some complex modules that are started with some
configuration, when they create persistence they write that configuration to RDB AUX fields, so
that can can always know with which configuration the persistence file they're loading was
created (could be critical). there is (was) one scenario in which they could load their persisted data,
and that configuration was missing, and this change fixes it.
Add a new module event: REDISMODULE_SUBEVENT_PERSISTENCE_SYNC_AOF_START, similar to
REDISMODULE_SUBEVENT_PERSISTENCE_AOF_START which is async.
Co-authored-by: Oran Agra <oran@redislabs.com>
Syntax:
`COMMAND DOCS [<command name> ...]`
Background:
Apparently old version of hiredis (and thus also redis-cli) can't
support more than 7 levels of multi-bulk nesting.
The solution is to move all the doc related metadata from COMMAND to a
new COMMAND DOCS sub-command.
The new DOCS sub-command returns a map of commands (not an array like in COMMAND),
And the same goes for the `subcommands` field inside it (also contains a map)
Besides that, the remaining new fields of COMMAND (hints, key-specs, and
sub-commands), are placed in the outer array rather than a nested map.
this was done mainly for consistency with the old format.
Other changes:
---
* Allow COMMAND INFO with no arguments, which returns all commands, so that we can some day deprecated
the plain COMMAND (no args)
* Reduce the amount of deferred replies from both COMMAND and COMMAND
DOCS, especially in the inner loops, since these create many small
reply objects, which lead to many small write syscalls and many small
TCP packets.
To make this easier, when populating the command table, we count the
history, args, and hints so we later know their size in advance.
Additionally, the movablekeys flag was moved into the flags register.
* Update generate-commands-json.py to take the data from both command, it
now executes redis-cli directly, instead of taking input from stdin.
* Sub-commands in both COMMAND (and COMMAND INFO), and also COMMAND DOCS,
show their full name. i.e. CONFIG
* GET will be shown as `config|get` rather than just `get`.
This will be visible both when asking for `COMMAND INFO config` and COMMAND INFO config|get`, but is
especially important for the later.
i.e. imagine someone doing `COMMAND INFO slowlog|get config|get` not being able to distinguish between the two
items in the array response.
Callers of redisFork() are logging `strerror(errno)` on failure.
`errno` is not set when there is already a child process, causing printing
current value of errno which was set before `redisFork()` call.
Setting errno to EEXIST on this failure to provide more meaningful error message.
# Short description
The Redis extended latency stats track per command latencies and enables:
- exporting the per-command percentile distribution via the `INFO LATENCYSTATS` command.
**( percentile distribution is not mergeable between cluster nodes ).**
- exporting the per-command cumulative latency distributions via the `LATENCY HISTOGRAM` command.
Using the cumulative distribution of latencies we can merge several stats from different cluster nodes
to calculate aggregate metrics .
By default, the extended latency monitoring is enabled since the overhead of keeping track of the
command latency is very small.
If you don't want to track extended latency metrics, you can easily disable it at runtime using the command:
- `CONFIG SET latency-tracking no`
By default, the exported latency percentiles are the p50, p99, and p999.
You can alter them at runtime using the command:
- `CONFIG SET latency-tracking-info-percentiles "0.0 50.0 100.0"`
## Some details:
- The total size per histogram should sit around 40 KiB. We only allocate those 40KiB when a command
was called for the first time.
- With regards to the WRITE overhead As seen below, there is no measurable overhead on the achievable
ops/sec or full latency spectrum on the client. Including also the measured redis-benchmark for unstable
vs this branch.
- We track from 1 nanosecond to 1 second ( everything above 1 second is considered +Inf )
## `INFO LATENCYSTATS` exposition format
- Format: `latency_percentiles_usec_<CMDNAME>:p0=XX,p50....`
## `LATENCY HISTOGRAM [command ...]` exposition format
Return a cumulative distribution of latencies in the format of a histogram for the specified command names.
The histogram is composed of a map of time buckets:
- Each representing a latency range, between 1 nanosecond and roughly 1 second.
- Each bucket covers twice the previous bucket's range.
- Empty buckets are not printed.
- Everything above 1 sec is considered +Inf.
- At max there will be log2(1000000000)=30 buckets
We reply a map for each command in the format:
`<command name> : { `calls`: <total command calls> , `histogram` : { <bucket 1> : latency , < bucket 2> : latency, ... } }`
Co-authored-by: Oran Agra <oran@redislabs.com>
This would mean that the effects of `CONFIG SET maxmemory` may not be visible once the command returns.
That could anyway happen since incremental eviction was added in redis 6.2 (see #7653)
We do this to fix one of the propagation bugs about eviction see #9890 and #10014.
Preventing COFIG SET maxmemory from propagating is just the tip of the iceberg.
Module that performs a write operation in a notification can cause any
command to be propagated, based on server.dirty
We need to come up with a better solution.
It turns out that libc malloc can return an allocation of a different size on requests of the same size.
this means that matching MEMORY USAGE of one key to another copy of the same data can fail.
Solution:
Keep running the test that calls MEMORY USAGE, but ignore the response.
We do that by introducing a new utility function to get the memory usage, which always returns 1
when the allocator is not jemalloc.
Other changes:
Some formatting for datatype2.tcl
Co-authored-by: Oran Agra <oran@redislabs.com>
Following #9656, this script generates a "commands.json" file from the output
of the new COMMAND. The output of this script is used in redis/redis-doc#1714
and by redis/redis-io#259. This also converts a couple of rogue dashes (in
'key-specs' and 'multiple-token' flags) to underscores (continues #9959).
There's a race between testing DBSIZE and the thread starting.
If the thread hadn't started by the time we checked DBISZE, no
keys will have been evicted.
The correct way is to check the evicted_keys stat.
The mess:
Some parts use alsoPropagate for late propagation, others using an immediate one (propagate()),
causing edge cases, ugly/hacky code, and the tendency for bugs
The basic idea is that all commands are propagated via alsoPropagate (i.e. added to a list) and the
top-most call() is responsible for going over that list and actually propagating them (and wrapping
them in MULTI/EXEC if there's more than one command). This is done in the new function,
propagatePendingCommands.
Callers to propagatePendingCommands:
1. top-most call() (we want all nested call()s to add to the also_propagate array and just the top-most
one to propagate them) - via `afterCommand`
2. handleClientsBlockedOnKeys: it is out of call() context and it may propagate stuff - via `afterCommand`.
3. handleClientsBlockedOnKeys edge case: if the looked-up key is already expired, we will propagate the
expire but will not unblock any client so `afterCommand` isn't called. in that case, we have to propagate
the deletion explicitly.
4. cron stuff: active-expire and eviction may also propagate stuff
5. modules: the module API allows to propagate stuff from just about anywhere (timers, keyspace notifications,
threads). I could have tried to catch all the out-of-call-context places but it seemed easier to handle it in one
place: when we free the context. in the spirit of what was done in call(), only the top-most freeing of a module
context may cause propagation.
6. modules: when using a thread-safe ctx it's not clear when/if the ctx will be freed. we do know that the module
must lock the GIL before calling RM_Replicate/RM_Call so we propagate the pending commands when
releasing the GIL.
A "known limitation", which were actually a bug, was fixed because of this commit (see propagate.tcl):
When using a mix of RM_Call with `!` and RM_Replicate, the command would propagate out-of-order:
first all the commands from RM_Call, and then the ones from RM_Replicate
Another thing worth mentioning is that if, in the past, a client would issue a MULTI/EXEC with just one
write command the server would blindly propagate the MULTI/EXEC too, even though it's redundant.
not anymore.
This commit renames propagate() to propagateNow() in order to cause conflicts in pending PRs.
propagatePendingCommands is the only caller of propagateNow, which is now a static, internal helper function.
Optimizations:
1. alsoPropagate will not add stuff to also_propagate if there's no AOF and replicas
2. alsoPropagate reallocs also_propagagte exponentially, to save calls to memmove
Bugfixes:
1. CONFIG SET can create evictions, sending notifications which can cause to dirty++ with modules.
we need to prevent it from propagating to AOF/replicas
2. We need to set current_client in RM_Call. buggy scenario:
- CONFIG SET maxmemory, eviction notifications, module hook calls RM_Call
- assertion in lookupKey crashes, because current_client has CONFIG SET, which isn't CMD_WRITE
3. minor: in eviction, call propagateDeletion after notification, like active-expire and all commands
(we always send a notification before propagating the command)
- add needs:debug flag for some tests
- disable "save" in external tests (speedup?)
- use debug_digest proc instead of debug command directly so it can be skipped
- use OBJECT ENCODING instead of DEBUG OBJECT to get encoding
- add a proc for OBJECT REFCOUNT so it can be skipped
- move a bunch of tests in latency_monitor tests to happen later so that latency monitor has some values in it
- add missing close_replication_stream calls
- make sure to close the temp client if DEBUG LOG fails
Block sensitive configs and commands by default.
* `enable-protected-configs` - block modification of configs with the new `PROTECTED_CONFIG` flag.
Currently we add this flag to `dbfilename`, and `dir` configs,
all of which are non-mutable configs that can set a file redis will write to.
* `enable-debug-command` - block the `DEBUG` command
* `enable-module-command` - block the `MODULE` command
These have a default value set to `no`, so that these features are not
exposed by default to client connections, and can only be set by modifying the config file.
Users can change each of these to either `yes` (allow all access), or `local` (allow access from
local TCP connections and unix domain connections)
Note that this is a **breaking change** (specifically the part about MODULE command being disabled by default).
I.e. we don't consider DEBUG command being blocked as an issue (people shouldn't have been using it),
and the few configs we protected are unlikely to have been set at runtime anyway.
On the other hand, it's likely to assume some users who use modules, load them from the config file anyway.
Note that's the whole point of this PR, for redis to be more secure by default and reduce the attack surface on
innocent users, so secure defaults will necessarily mean a breaking change.
some languages can build a json-like object by parsing a textual json,
but it works poorly when attributes contain hyphens
example in JS:
```
let j = JSON.parse(json)
j['key-name'] <- works
j.key-name <= illegal syntax
```
Delete the hardcoded command table and replace it with an auto-generated table, based
on a JSON file that describes the commands (each command must have a JSON file).
These JSON files are the SSOT of everything there is to know about Redis commands,
and it is reflected fully in COMMAND INFO.
These JSON files are used to generate commands.c (using a python script), which is then
committed to the repo and compiled.
The purpose is:
* Clients and proxies will be able to get much more info from redis, instead of relying on hard coded logic.
* drop the dependency between Redis-user and the commands.json in redis-doc.
* delete help.h and have redis-cli learn everything it needs to know just by issuing COMMAND (will be
done in a separate PR)
* redis.io should stop using commands.json and learn everything from Redis (ultimately one of the release
artifacts should be a large JSON, containing all the information about all of the commands, which will be
generated from COMMAND's reply)
* the byproduct of this is:
* module commands will be able to provide that info and possibly be more of a first-class citizens
* in theory, one may be able to generate a redis client library for a strictly typed language, by using this info.
### Interface changes
#### COMMAND INFO's reply change (and arg-less COMMAND)
Before this commit the reply at index 7 contained the key-specs list
and reply at index 8 contained the sub-commands list (Both unreleased).
Now, reply at index 7 is a map of:
- summary - short command description
- since - debut version
- group - command group
- complexity - complexity string
- doc-flags - flags used for documentation (e.g. "deprecated")
- deprecated-since - if deprecated, from which version?
- replaced-by - if deprecated, which command replaced it?
- history - a list of (version, what-changed) tuples
- hints - a list of strings, meant to provide hints for clients/proxies. see https://github.com/redis/redis/issues/9876
- arguments - an array of arguments. each element is a map, with the possibility of nesting (sub-arguments)
- key-specs - an array of keys specs (already in unstable, just changed location)
- subcommands - a list of sub-commands (already in unstable, just changed location)
- reply-schema - will be added in the future (see https://github.com/redis/redis/issues/9845)
more details on these can be found in https://github.com/redis/redis-doc/pull/1697
only the first three fields are mandatory
#### API changes (unreleased API obviously)
now they take RedisModuleCommand opaque pointer instead of looking up the command by name
- RM_CreateSubcommand
- RM_AddCommandKeySpec
- RM_SetCommandKeySpecBeginSearchIndex
- RM_SetCommandKeySpecBeginSearchKeyword
- RM_SetCommandKeySpecFindKeysRange
- RM_SetCommandKeySpecFindKeysKeynum
Currently, we did not add module API to provide additional information about their commands because
we couldn't agree on how the API should look like, see https://github.com/redis/redis/issues/9944.
### Somehow related changes
1. Literals should be in uppercase while placeholder in lowercase. Now all the GEO* command
will be documented with M|KM|FT|MI and can take both lowercase and uppercase
### Unrelated changes
1. Bugfix: no_madaory_keys was absent in COMMAND's reply
2. expose CMD_MODULE as "module" via COMMAND
3. have a dedicated uint64 for ACL categories (instead of having them in the same uint64 as command flags)
Co-authored-by: Itamar Haber <itamar@garantiadata.com>
In #9323, when `repl-diskless-load` is enabled and set to `swapdb`,
if the master replication ID hasn't changed, we can load data-set
asynchronously, and serving read commands during the full resync.
In `diskless loading short read` test, after a loading successfully,
we will wait for the loading to stop and continue the for loop.
After the introduction of `async_loading`, we also need to check it.
Otherwise the next loop will start too soon, may trigger a timing issue.
Some people complain that QUIT is missing from help/command table.
Not appearing in COMMAND command, command stats, ACL, etc.
and instead, there's a hack in processCommand with a comment that looks outdated.
Note that it is [documented](https://redis.io/commands/quit)
At the same time, HOST: and POST are there in the command table although these are not real commands.
They would appear in the COMMAND command, and even in commandstats.
Other changes:
1. Initialize the static logged_time static var in securityWarningCommand
2. add `no-auth` flag to RESET so it can always be executed.
In both tests, "diskless loading short read" and "diskless loading short read with module",
the timeout of waiting for the replica to respond to a short read and log it, is too short.
Also, add --dump-logs in runtest-moduleapi for valgrind runs.
For diskless replication in swapdb mode, considering we already spend replica memory
having a backup of current db to restore in case of failure, we can have the following benefits
by instead swapping database only in case we succeeded in transferring db from master:
- Avoid `LOADING` response during failed and successful synchronization for cases where the
replica is already up and running with data.
- Faster total time of diskless replication, because now we're moving from Transfer + Flush + Load
time to Transfer + Load only. Flushing the tempDb is done asynchronously after swapping.
- This could be implemented also for disk replication with similar benefits if consumers are willing
to spend the extra memory usage.
General notes:
- The concept of `backupDb` becomes `tempDb` for clarity.
- Async loading mode will only kick in if the replica is syncing from a master that has the same
repl-id the one it had before. i.e. the data it's getting belongs to a different time of the same timeline.
- New property in INFO: `async_loading` to differentiate from the blocking loading
- Slot to Key mapping is now a field of `redisDb` as it's more natural to access it from both server.db
and the tempDb that is passed around.
- Because this is affecting replicas only, we assume that if they are not readonly and write commands
during replication, they are lost after SYNC same way as before, but we're still denying CONFIG SET
here anyways to avoid complications.
Considerations for review:
- We have many cases where server.loading flag is used and even though I tried my best, there may
be cases where async_loading should be checked as well and cases where it shouldn't (would require
very good understanding of whole code)
- Several places that had different behavior depending on the loading flag where actually meant to just
handle commands coming from the AOF client differently than ones coming from real clients, changed
to check CLIENT_ID_AOF instead.
**Additional for Release Notes**
- Bugfix - server.dirty was not incremented for any kind of diskless replication, as effect it wouldn't
contribute on triggering next database SAVE
- New flag for RM_GetContextFlags module API: REDISMODULE_CTX_FLAGS_ASYNC_LOADING
- Deprecated RedisModuleEvent_ReplBackup. Starting from Redis 7.0, we don't fire this event.
Instead, we have the new RedisModuleEvent_ReplAsyncLoad holding 3 sub-events: STARTED,
ABORTED and COMPLETED.
- New module flag REDISMODULE_OPTIONS_HANDLE_REPL_ASYNC_LOAD for RedisModule_SetModuleOptions
to allow modules to declare they support the diskless replication with async loading (when absent, we fall
back to disk-based loading).
Co-authored-by: Eduardo Semprebon <edus@saxobank.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
The module test in reply.tcl was introduced by #8521 but didn't run until recently (see #9639)
and then it started failing with valgrind.
This is because valgrind uses 64 bit long double (unlike most other platforms that have at least 80 bits)
But besides valgrind, the tests where also incompatible with ARM32, which also uses 64 bit long doubles.
We now use appropriate value to avoid issues with either valgrind or ARM32
In all the double tests, i use 3.141, which is safe since since addReplyDouble uses
`%.17Lg` which is able to represent this value without adding any digits due to precision loss.
In the long double, since we use `%.17Lf` in ld2string, it preserves 17 significant
digits, rather than 17 digit after the decimal point (like in `%.17Lg`).
So to make these similar, i use value lower than 1 (no digits left of
the period)
Lastly, we have the same issue with TCL (no long doubles) so we read
raw protocol in that test.
Note that the only error before this fix (in both valgrind and ARM32 is this:
```
*** [err]: RM_ReplyWithLongDouble: a float reply in tests/unit/moduleapi/reply.tcl
Expected '3.141' to be equal to '3.14100000000000001' (context: type eval line 2 cmd {assert_equal 3.141 [r rw.longdouble 3.141]} proc ::test)
```
so the changes to debug.c and scripting.tcl aren't really needed, but i consider them a cleanup
(i.e. scripting.c validated a different constant than the one that's sent to it from debug.c).
Another unrelated change is to add the RESP version to the repeated tests in reply.tcl
Let modules use additional type of RESP3 response (unused by redis so far)
Also fix tests that where introduced in #8521 but didn't actually run.
Co-authored-by: Oran Agra <oran@redislabs.com>
## Background
For redis master, one replica uses one copy of replication buffer, that is a big waste of memory,
more replicas more waste, and allocate/free memory for every reply list also cost much.
If we set client-output-buffer-limit small and write traffic is heavy, master may disconnect with
replicas and can't finish synchronization with replica. If we set client-output-buffer-limit big,
master may be OOM when there are many replicas that separately keep much memory.
Because replication buffers of different replica client are the same, one simple idea is that
all replicas only use one replication buffer, that will effectively save memory.
Since replication backlog content is the same as replicas' output buffer, now we
can discard replication backlog memory and use global shared replication buffer
to implement replication backlog mechanism.
## Implementation
I create one global "replication buffer" which contains content of replication stream.
The structure of "replication buffer" is similar to the reply list that exists in every client.
But the node of list is `replBufBlock`, which has `id, repl_offset, refcount` fields.
```c
/* Replication buffer blocks is the list of replBufBlock.
*
* +--------------+ +--------------+ +--------------+
* | refcount = 1 | ... | refcount = 0 | ... | refcount = 2 |
* +--------------+ +--------------+ +--------------+
* | / \
* | / \
* | / \
* Repl Backlog Replia_A Replia_B
*
* Each replica or replication backlog increments only the refcount of the
* 'ref_repl_buf_node' which it points to. So when replica walks to the next
* node, it should first increase the next node's refcount, and when we trim
* the replication buffer nodes, we remove node always from the head node which
* refcount is 0. If the refcount of the head node is not 0, we must stop
* trimming and never iterate the next node. */
/* Similar with 'clientReplyBlock', it is used for shared buffers between
* all replica clients and replication backlog. */
typedef struct replBufBlock {
int refcount; /* Number of replicas or repl backlog using. */
long long id; /* The unique incremental number. */
long long repl_offset; /* Start replication offset of the block. */
size_t size, used;
char buf[];
} replBufBlock;
```
So now when we feed replication stream into replication backlog and all replicas, we only need
to feed stream into replication buffer `feedReplicationBuffer`. In this function, we set some fields of
replication backlog and replicas to references of the global replication buffer blocks. And we also
need to check replicas' output buffer limit to free if exceeding `client-output-buffer-limit`, and trim
replication backlog if exceeding `repl-backlog-size`.
When sending reply to replicas, we also need to iterate replication buffer blocks and send its
content, when totally sending one block for replica, we decrease current node count and
increase the next current node count, and then free the block which reference is 0 from the
head of replication buffer blocks.
Since now we use linked list to manage replication backlog, it may cost much time for iterating
all linked list nodes to find corresponding replication buffer node. So we create a rax tree to
store some nodes for index, but to avoid rax tree occupying too much memory, i record
one per 64 nodes for index.
Currently, to make partial resynchronization as possible as much, we always let replication
backlog as the last reference of replication buffer blocks, backlog size may exceeds our setting
if slow replicas that reference vast replication buffer blocks, and this method doesn't increase
memory usage since they share replication buffer. To avoid freezing server for freeing unreferenced
replication buffer blocks when we need to trim backlog for exceeding backlog size setting,
we trim backlog incrementally (free 64 blocks per call now), and make it faster in
`beforeSleep` (free 640 blocks).
### Other changes
- `mem_total_replication_buffers`: we add this field in INFO command, it means the total
memory of replication buffers used.
- `mem_clients_slaves`: now even replica is slow to replicate, and its output buffer memory
is not 0, but it still may be 0, since replication backlog and replicas share one global replication
buffer, only if replication buffer memory is more than the repl backlog setting size, we consider
the excess as replicas' memory. Otherwise, we think replication buffer memory is the consumption
of repl backlog.
- Key eviction
Since all replicas and replication backlog share global replication buffer, we think only the
part of exceeding backlog size the extra separate consumption of replicas.
Because we trim backlog incrementally in the background, backlog size may exceeds our
setting if slow replicas that reference vast replication buffer blocks disconnect.
To avoid massive eviction loop, we don't count the delayed freed replication backlog into
used memory even if there are no replicas, i.e. we also regard this memory as replicas's memory.
- `client-output-buffer-limit` check for replica clients
It doesn't make sense to set the replica clients output buffer limit lower than the repl-backlog-size
config (partial sync will succeed and then replica will get disconnected). Such a configuration is
ignored (the size of repl-backlog-size will be used). This doesn't have memory consumption
implications since the replica client will share the backlog buffers memory.
- Drop replication backlog after loading data if needed
We always create replication backlog if server is a master, we need it because we put DELs in
it when loading expired keys in RDB, but if RDB doesn't have replication info or there is no rdb,
it is not possible to support partial resynchronization, to avoid extra memory of replication backlog,
we drop it.
- Multi IO threads
Since all replicas and replication backlog use global replication buffer, if I/O threads are enabled,
to guarantee data accessing thread safe, we must let main thread handle sending the output buffer
to all replicas. But before, other IO threads could handle sending output buffer of all replicas.
## Other optimizations
This solution resolve some other problem:
- When replicas disconnect with master since of out of output buffer limit, releasing the output
buffer of replicas may freeze server if we set big `client-output-buffer-limit` for replicas, but now,
it doesn't cause freezing.
- This implementation may mitigate reply list copy cost time(also freezes server) when one replication
has huge reply buffer and another replica can copy buffer for full synchronization. now, we just copy
reference info, it is very light.
- If we set replication backlog size big, it also may cost much time to copy replication backlog into
replica's output buffer. But this commit eliminates this problem.
- Resizing replication backlog size doesn't empty current replication backlog content.
Before this commit, module blocked clients did not carry through the original RESP version, resulting with RESP3 clients receiving unexpected RESP2 replies.
Following #9483 the daily CI exposed a few problems.
* The cluster creation code (uses redis-cli) is complicated to test with TLS enabled.
for now i'm just skipping them since the tests we run there don't really need that kind of coverage
* cluster port binding failures
note that `find_available_port` already looks for a free cluster port
but the code in `wait_server_started` couldn't detect the failure of binding
(the text it greps for wasn't found in the log)
## Intro
The purpose is to allow having different flags/ACL categories for
subcommands (Example: CONFIG GET is ok-loading but CONFIG SET isn't)
We create a small command table for every command that has subcommands
and each subcommand has its own flags, etc. (same as a "regular" command)
This commit also unites the Redis and the Sentinel command tables
## Affected commands
CONFIG
Used to have "admin ok-loading ok-stale no-script"
Changes:
1. Dropped "ok-loading" in all except GET (this doesn't change behavior since
there were checks in the code doing that)
XINFO
Used to have "read-only random"
Changes:
1. Dropped "random" in all except CONSUMERS
XGROUP
Used to have "write use-memory"
Changes:
1. Dropped "use-memory" in all except CREATE and CREATECONSUMER
COMMAND
No changes.
MEMORY
Used to have "random read-only"
Changes:
1. Dropped "random" in PURGE and USAGE
ACL
Used to have "admin no-script ok-loading ok-stale"
Changes:
1. Dropped "admin" in WHOAMI, GENPASS, and CAT
LATENCY
No changes.
MODULE
No changes.
SLOWLOG
Used to have "admin random ok-loading ok-stale"
Changes:
1. Dropped "random" in RESET
OBJECT
Used to have "read-only random"
Changes:
1. Dropped "random" in ENCODING and REFCOUNT
SCRIPT
Used to have "may-replicate no-script"
Changes:
1. Dropped "may-replicate" in all except FLUSH and LOAD
CLIENT
Used to have "admin no-script random ok-loading ok-stale"
Changes:
1. Dropped "random" in all except INFO and LIST
2. Dropped "admin" in ID, TRACKING, CACHING, GETREDIR, INFO, SETNAME, GETNAME, and REPLY
STRALGO
No changes.
PUBSUB
No changes.
CLUSTER
Changes:
1. Dropped "admin in countkeysinslots, getkeysinslot, info, nodes, keyslot, myid, and slots
SENTINEL
No changes.
(note that DEBUG also fits, but we decided not to convert it since it's for
debugging and anyway undocumented)
## New sub-command
This commit adds another element to the per-command output of COMMAND,
describing the list of subcommands, if any (in the same structure as "regular" commands)
Also, it adds a new subcommand:
```
COMMAND LIST [FILTERBY (MODULE <module-name>|ACLCAT <cat>|PATTERN <pattern>)]
```
which returns a set of all commands (unless filters), but excluding subcommands.
## Module API
A new module API, RM_CreateSubcommand, was added, in order to allow
module writer to define subcommands
## ACL changes:
1. Now, that each subcommand is actually a command, each has its own ACL id.
2. The old mechanism of allowed_subcommands is redundant
(blocking/allowing a subcommand is the same as blocking/allowing a regular command),
but we had to keep it, to support the widespread usage of allowed_subcommands
to block commands with certain args, that aren't subcommands (e.g. "-select +select|0").
3. I have renamed allowed_subcommands to allowed_firstargs to emphasize the difference.
4. Because subcommands are commands in ACL too, you can now use "-" to block subcommands
(e.g. "+client -client|kill"), which wasn't possible in the past.
5. It is also possible to use the allowed_firstargs mechanism with subcommand.
For example: `+config -config|set +config|set|loglevel` will block all CONFIG SET except
for setting the log level.
6. All of the ACL changes above required some amount of refactoring.
## Misc
1. There are two approaches: Either each subcommand has its own function or all
subcommands use the same function, determining what to do according to argv[0].
For now, I took the former approaches only with CONFIG and COMMAND,
while other commands use the latter approach (for smaller blamelog diff).
2. Deleted memoryGetKeys: It is no longer needed because MEMORY USAGE now uses the "range" key spec.
4. Bugfix: GETNAME was missing from CLIENT's help message.
5. Sentinel and Redis now use the same table, with the same function pointer.
Some commands have a different implementation in Sentinel, so we redirect
them (these are ROLE, PUBLISH, and INFO).
6. Command stats now show the stats per subcommand (e.g. instead of stats just
for "config" you will have stats for "config|set", "config|get", etc.)
7. It is now possible to use COMMAND directly on subcommands:
COMMAND INFO CONFIG|GET (The pipeline syntax was inspired from ACL, and
can be used in functions lookupCommandBySds and lookupCommandByCString)
8. STRALGO is now a container command (has "help")
## Breaking changes:
1. Command stats now show the stats per subcommand (see (5) above)
Prevent clients from being blocked forever in cluster when they block with their own module command
and the hash slot is migrated to another master at the same time.
These will get a redirection message when unblocked.
Also, release clients blocked on module commands when cluster is down (same as other blocked clients)
This commit adds basic tests for the main (non-cluster) redis test infra that test the cluster.
This was done because the cluster test infra can't handle some common test features,
but most importantly we only build the test modules with the non-cluster test suite.
note that rather than really supporting cluster operations by the test infra, it was added (as dup code)
in two files, one for module tests and one for non-modules tests, maybe in the future we'll refactor that.
Co-authored-by: Oran Agra <oran@redislabs.com>
This commit introduced a new flag to the RM_Call:
'C' - Check if the command can be executed according to the ACLs associated with it.
Also, three new API's added to check if a command, key, or channel can be executed or accessed
by a user, according to the ACLs associated with it.
- RM_ACLCheckCommandPerm
- RM_ACLCheckKeyPerm
- RM_ACLCheckChannelPerm
The user for these API's is a RedisModuleUser object, that for a Module user returned by the RM_CreateModuleUser API, or for a general ACL user can be retrieved by these two new API's:
- RM_GetCurrentUserName - Retrieve the user name of the client connection behind the current context.
- RM_GetModuleUserFromUserName - Get a RedisModuleUser from a user name
As a result of getting a RedisModuleUser from name, it can now also access the general ACL users (not just ones created by the module).
This mean the already existing API RM_SetModuleUserACL(), can be used to change the ACL rules for such users.
Fix#7297
The problem:
Today, there is no way for a client library or app to know the key name indexes for commands such as
ZUNIONSTORE/EVAL and others with "numkeys", since COMMAND INFO returns no useful info for them.
For cluster-aware redis clients, this requires to 'patch' the client library code specifically for each of these commands or to
resolve each execution of these commands with COMMAND GETKEYS.
The solution:
Introducing key specs other than the legacy "range" (first,last,step)
The 8th element of the command info array, if exists, holds an array of key specs. The array may be empty, which indicates
the command doesn't take any key arguments or may contain one or more key-specs, each one may leads to the discovery
of 0 or more key arguments.
A client library that doesn't support this key-spec feature will keep using the first,last,step and movablekeys flag which will
obviously remain unchanged.
A client that supports this key-specs feature needs only to look at the key-specs array. If it finds an unrecognized spec, it
must resort to using COMMAND GETKEYS if it wishes to get all key name arguments, but if all it needs is one key in order
to know which cluster node to use, then maybe another spec (if the command has several) can supply that, and there's no
need to use GETKEYS.
Each spec is an array of arguments, first one is the spec name, the second is an array of flags, and the third is an array
containing details about the spec (specific meaning for each spec type)
The initial flags we support are "read" and "write" indicating if the keys that this key-spec finds are used for read or for write.
clients should ignore any unfamiliar flags.
In order to easily find the positions of keys in a given array of args we introduce keys specs. There are two logical steps of
key specs:
1. `start_search`: Given an array of args, indicate where we should start searching for keys
2. `find_keys`: Given the output of start_search and an array of args, indicate all possible indices of keys.
### start_search step specs
- `index`: specify an argument index explicitly
- `index`: 0 based index (1 means the first command argument)
- `keyword`: specify a string to match in `argv`. We should start searching for keys just after the keyword appears.
- `keyword`: the string to search for
- `start_search`: an index from which to start the keyword search (can be negative, which means to search from the end)
Examples:
- `SET` has start_search of type `index` with value `1`
- `XREAD` has start_search of type `keyword` with value `[“STREAMS”,1]`
- `MIGRATE` has start_search of type `keyword` with value `[“KEYS”,-2]`
### find_keys step specs
- `range`: specify `[count, step, limit]`.
- `lastkey`: index of the last key. relative to the index returned from begin_search. -1 indicating till the last argument, -2 one before the last
- `step`: how many args should we skip after finding a key, in order to find the next one
- `limit`: if count is -1, we use limit to stop the search by a factor. 0 and 1 mean no limit. 2 means ½ of the remaining args, 3 means ⅓, and so on.
- “keynum”: specify `[keynum_index, first_key_index, step]`.
- `keynum_index`: is relative to the return of the `start_search` spec.
- `first_key_index`: is relative to `keynum_index`.
- `step`: how many args should we skip after finding a key, in order to find the next one
Examples:
- `SET` has `range` of `[0,1,0]`
- `MSET` has `range` of `[-1,2,0]`
- `XREAD` has `range` of `[-1,1,2]`
- `ZUNION` has `start_search` of type `index` with value `1` and `find_keys` of type `keynum` with value `[0,1,1]`
- `AI.DAGRUN` has `start_search` of type `keyword` with value `[“LOAD“,1]` and `find_keys` of type `keynum` with value
`[0,1,1]` (see https://oss.redislabs.com/redisai/master/commands/#aidagrun)
Note: this solution is not perfect as the module writers can come up with anything, but at least we will be able to find the key
args of the vast majority of commands.
If one of the above specs can’t describe the key positions, the module writer can always fall back to the `getkeys-api` option.
Some keys cannot be found easily (`KEYS` in `MIGRATE`: Imagine the argument for `AUTH` is the string “KEYS” - we will
start searching in the wrong index).
The guarantee is that the specs may be incomplete (`incomplete` will be specified in the spec to denote that) but we never
report false information (assuming the command syntax is correct).
For `MIGRATE` we start searching from the end - `startfrom=-1` - and if one of the keys is actually called "keys" we will
report only a subset of all keys - hence the `incomplete` flag.
Some `incomplete` specs can be completely empty (i.e. UNKNOWN begin_search) which should tell the client that
COMMAND GETKEYS (or any other way to get the keys) must be used (Example: For `SORT` there is no way to describe
the STORE keyword spec, as the word "store" can appear anywhere in the command).
We will expose these key specs in the `COMMAND` command so that clients can learn, on startup, where the keys are for
all commands instead of holding hardcoded tables or use `COMMAND GETKEYS` in runtime.
Comments:
1. Redis doesn't internally use the new specs, they are only used for COMMAND output.
2. In order to support the current COMMAND INFO format (reply array indices 4, 5, 6) we created a synthetic range, called
legacy_range, that, if possible, is built according to the new specs.
3. Redis currently uses only getkeys_proc or the legacy_range to get the keys indices (in COMMAND GETKEYS for
example).
"incomplete" specs:
the command we have issues with are MIGRATE, STRALGO, and SORT
for MIGRATE, because the token KEYS, if exists, must be the last token, we can search in reverse. it one of the keys is
actually the string "keys" will return just a subset of the keys (hence, it's "incomplete")
for SORT and STRALGO we can use this heuristic (the keys can be anywhere in the command) and therefore we added a
key spec that is both "incomplete" and of "unknown type"
if a client encounters an "incomplete" spec it means that it must find a different way (either COMMAND GETKEYS or have
its own parser) to retrieve the keys.
please note that all commands, apart from the three mentioned above, have "complete" key specs
List functions operating on elements by index:
* RM_ListGet
* RM_ListSet
* RM_ListInsert
* RM_ListDelete
Iteration is done using a simple for loop over indices.
The index based functions use an internal iterator as an optimization.
This is explained in the docs:
```
* Many of the list functions access elements by index. Since a list is in
* essence a doubly-linked list, accessing elements by index is generally an
* O(N) operation. However, if elements are accessed sequentially or with
* indices close together, the functions are optimized to seek the index from
* the previous index, rather than seeking from the ends of the list.
*
* This enables iteration to be done efficiently using a simple for loop:
*
* long n = RM_ValueLength(key);
* for (long i = 0; i < n; i++) {
* RedisModuleString *elem = RedisModule_ListGet(key, i);
* // Do stuff...
* }
```
## Current state
1. Lua has its own parser that handles parsing `reds.call` replies and translates them
to Lua objects that can be used by the user Lua code. The parser partially handles
resp3 (missing big number, verbatim, attribute, ...)
2. Modules have their own parser that handles parsing `RM_Call` replies and translates
them to RedisModuleCallReply objects. The parser does not support resp3.
In addition, in the future, we want to add Redis Function (#8693) that will probably
support more languages. At some point maintaining so many parsers will stop
scaling (bug fixes and protocol changes will need to be applied on all of them).
We will probably end up with different parsers that support different parts of the
resp protocol (like we already have today with Lua and modules)
## PR Changes
This PR attempt to unified the reply parsing of Lua and modules (and in the future
Redis Function) by introducing a new parser unit (`resp_parser.c`). The new parser
handles parsing the reply and calls different callbacks to allow the users (another
unit that uses the parser, i.e, Lua, modules, or Redis Function) to analyze the reply.
### Lua API Additions
The code that handles reply parsing on `scripting.c` was removed. Instead, it uses
the resp_parser to parse and create a Lua object out of the reply. As mentioned
above the Lua parser did not handle parsing big numbers, verbatim, and attribute.
The new parser can handle those and so Lua also gets it for free.
Those are translated to Lua objects in the following way:
1. Big Number - Lua table `{'big_number':'<str representation for big number>'}`
2. Verbatim - Lua table `{'verbatim_string':{'format':'<verbatim format>', 'string':'<verbatim string value>'}}`
3. Attribute - currently ignored and not expose to the Lua parser, another issue will be open to decide how to expose it.
Tests were added to check resp3 reply parsing on Lua
### Modules API Additions
The reply parsing code on `module.c` was also removed and the new resp_parser is used instead.
In addition, the RedisModuleCallReply was also extracted to a separate unit located on `call_reply.c`
(in the future, this unit will also be used by Redis Function). A nice side effect of unified parsing is
that modules now also support resp3. Resp3 can be enabled by giving `3` as a parameter to the
fmt argument of `RM_Call`. It is also possible to give `0`, which will indicate an auto mode. i.e, Redis
will automatically chose the reply protocol base on the current client set on the RedisModuleCtx
(this mode will mostly be used when the module want to pass the reply to the client as is).
In addition, the following RedisModuleAPI were added to allow analyzing resp3 replies:
* New RedisModuleCallReply types:
* `REDISMODULE_REPLY_MAP`
* `REDISMODULE_REPLY_SET`
* `REDISMODULE_REPLY_BOOL`
* `REDISMODULE_REPLY_DOUBLE`
* `REDISMODULE_REPLY_BIG_NUMBER`
* `REDISMODULE_REPLY_VERBATIM_STRING`
* `REDISMODULE_REPLY_ATTRIBUTE`
* New RedisModuleAPI:
* `RedisModule_CallReplyDouble` - getting double value from resp3 double reply
* `RedisModule_CallReplyBool` - getting boolean value from resp3 boolean reply
* `RedisModule_CallReplyBigNumber` - getting big number value from resp3 big number reply
* `RedisModule_CallReplyVerbatim` - getting format and value from resp3 verbatim reply
* `RedisModule_CallReplySetElement` - getting element from resp3 set reply
* `RedisModule_CallReplyMapElement` - getting key and value from resp3 map reply
* `RedisModule_CallReplyAttribute` - getting a reply attribute
* `RedisModule_CallReplyAttributeElement` - getting key and value from resp3 attribute reply
* New context flags:
* `REDISMODULE_CTX_FLAGS_RESP3` - indicate that the client is using resp3
Tests were added to check the new RedisModuleAPI
### Modules API Changes
* RM_ReplyWithCallReply might return REDISMODULE_ERR if the given CallReply is in resp3
but the client expects resp2. This is not a breaking change because in order to get a resp3
CallReply one needs to specifically specify `3` as a parameter to the fmt argument of
`RM_Call` (as mentioned above).
Tests were added to check this change
### More small Additions
* Added `debug set-disable-deny-scripts` that allows to turn on and off the commands no-script
flag protection. This is used by the Lua resp3 tests so it will be possible to run `debug protocol`
and check the resp3 parsing code.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
Modules that use background threads with thread safe contexts are likely
to use RM_BlockClient() without a timeout function, because they do not
set up a timeout.
Before this commit, `CLIENT UNBLOCK` would result with a crash as the
`NULL` timeout callback is called. Beyond just crashing, this is also
logically wrong as it may throw the module into an unexpected client
state.
This commits makes `CLIENT UNBLOCK` on such clients behave the same as
any other client that is not in a blocked state and therefore cannot be
unblocked.
Previously, passing 0 for newlen would not truncate the string at all.
This adds handling of this case, freeing the old string and creating a new empty string.
Other changes:
- Move `src/modules/testmodule.c` to `tests/modules/basics.c`
- Introduce that basic test into the test suite
- Add tests to cover StringTruncate
- Add `test-modules` build target for the main makefile
- Extend `distclean` build target to clean modules too
Create new module type enhanced callbacks: mem_usage2, free_effort2, unlink2, copy2.
These will be given a context point from which the module can obtain the key name and database id.
In addition the digest and defrag context can now be used to obtain the key name and database id.
This PR adds a spell checker CI action that will fail future PRs if they introduce typos and spelling mistakes.
This spell checker is based on blacklist of common spelling mistakes, so it will not catch everything,
but at least it is also unlikely to cause false positives.
Besides that, the PR also fixes many spelling mistakes and types, not all are a result of the spell checker we use.
Here's a summary of other changes:
1. Scanned the entire source code and fixes all sorts of typos and spelling mistakes (including missing or extra spaces).
2. Outdated function / variable / argument names in comments
3. Fix outdated keyspace masks error log when we check `config.notify-keyspace-events` in loadServerConfigFromString.
4. Trim the white space at the end of line in `module.c`. Check: https://github.com/redis/redis/pull/7751
5. Some outdated https link URLs.
6. Fix some outdated comment. Such as:
- In README: about the rdb, we used to said create a `thread`, change to `process`
- dbRandomKey function coment (about the dictGetRandomKey, change to dictGetFairRandomKey)
- notifyKeyspaceEvent fucntion comment (add type arg)
- Some others minor fix in comment (Most of them are incorrectly quoted by variable names)
7. Modified the error log so that users can easily distinguish between TCP and TLS in `changeBindAddr`
Adding a new type mask for key space notification, REDISMODULE_NOTIFY_MODULE, to enable unique notifications from commands on REDISMODULE_KEYTYPE_MODULE type keys (which is currently unsupported).
Modules can subscribe to a module key keyspace notification by RM_SubscribeToKeyspaceEvents,
and clients by notify-keyspace-events of redis.conf or via the CONFIG SET, with the characters 'd' or 'A'
(REDISMODULE_NOTIFY_MODULE type mask is part of the '**A**ll' notation for key space notifications).
Refactor: move some pubsub test infra from pubsub.tcl to util.tcl to be re-used by other tests.
Before this commit using RM_Call without "!" could cause the master
to lazy-expire a key (delete it) but without replicating to replicas.
This could cause the replica's memory usage to gradually grow and
could also cause consistency issues if the master and replica have
a clock diff.
This bug was introduced in #8617
Added a test which demonstrates that scenario.
1. moduleReplicateMultiIfNeeded should use server.in_eval like
moduleHandlePropagationAfterCommandCallback
2. server.in_eval could have been set to 1 and not reset back
to 0 (a lot of missed early-exits after in_eval is already 1)
Note: The new assertions in processCommand cover (2) and I added
two module tests to cover (1)
Implications:
If an EVAL that failed (and thus left server.in_eval=1) runs before a module
command that replicates, the replication stream will contain MULTI (because
moduleReplicateMultiIfNeeded used to check server.lua_caller which is NULL
at this point) but not EXEC (because server.in_eval==1)
This only affects modules as module.c the only user of server.in_eval.
Affects versions 6.2.0, 6.2.1
Bug 1:
When a module ctx is freed moduleHandlePropagationAfterCommandCallback
is called and handles propagation. We want to prevent it from propagating
commands that were not replicated by the same context. Example:
1. module1.foo does: RM_Replicate(cmd1); RM_Call(cmd2); RM_Replicate(cmd3)
2. RM_Replicate(cmd1) propagates MULTI and adds cmd1 to also_propagagte
3. RM_Call(cmd2) create a new ctx, calls call() and destroys the ctx.
4. moduleHandlePropagationAfterCommandCallback is called, calling
alsoPropagates EXEC (Note: EXEC is still not written to socket),
setting server.in_trnsaction = 0
5. RM_Replicate(cmd3) is called, propagagting yet another MULTI (now
we have nested MULTI calls, which is no good) and then cmd3
We must prevent RM_Call(cmd2) from resetting server.in_transaction.
REDISMODULE_CTX_MULTI_EMITTED was revived for that purpose.
Bug 2:
Fix issues with nested RM_Call where some have '!' and some don't.
Example:
1. module1.foo does RM_Call of module2.bar without replication (i.e. no '!')
2. module2.bar internally calls RM_Call of INCR with '!'
3. at the end of module1.foo we call RM_ReplicateVerbatim
We want the replica/AOF to see only module1.foo and not the INCR from module2.bar
Introduced a global replication_allowed flag inside RM_Call to determine
whether we need to replicate or not (even if '!' was specified)
Other changes:
Split beforePropagateMultiOrExec to beforePropagateMulti afterPropagateExec
just for better readability
Because when the RM_Call is invoked. It will create a faker client.
The point is client connection is NULL, so server will crash in connGetInfo
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
A single client pointer is added in the server struct. This is
initialized by the first RM_Call() and reused for every subsequent
RM_Call() except if it's already in use, which means that it's not
used for (recursive) module calls to modules. For these, a new
"fake" client is created each time.
Other changes:
* Avoid allocating a dict iterator in pubsubUnsubscribeAllChannels
when not needed
The added flag affects the return value of RM_HashSet() to include
the number of inserted fields, in addition to updated and deleted
fields.
errno is set on errors, tests are added and documentation updated.
- removes time sensitive checks from block on background tests during leak checks.
- fix uninitialized variable on RedisModuleBlockedClient() when calling
RM_BlockedClientMeasureTimeEnd() without RM_BlockedClientMeasureTimeStart()
The test failed from time to time on Github actions.
We think it's possible that on the module's blocking timeout
time tracking test, the timeout is happening prior we issue the
RedisModule_BlockedClientMeasureTimeStart(bc) on the
background thread. If that is the case one possible solution
is to increase the timeout.
Increasing to 200ms to 500ms to see if nightly stops failing.
Without this fix, RM_ZsetRem can leave empty sorted sets which are
not allowed to exist.
Removing from a sorted set while iterating seems to work (while
inserting causes failed assetions). RM_ZsetRangeEndReached is
modified to return 1 if the key doesn't exist, to terminate
iteration when the last element has been removed.
This commit enables tracking time of the background tasks and on replies,
opening the door for properly tracking commands that rely on blocking / background
work via the slowlog, latency history, and commandstats.
Some notes:
- The time spent blocked waiting for key changes, or blocked on synchronous
replication is not accounted for.
- **This commit does not affect latency tracking of commands that are non-blocking
or do not have background work.** ( meaning that it all stays the same with exception to
`BZPOPMIN`,`BZPOPMAX`,`BRPOP`,`BLPOP`, etc... and module's commands that rely
on background threads ).
- Specifically for latency history command we've added a new event class named
`command-unblocking` that will enable latency monitoring on commands that spawn
background threads to do the work.
- For blocking commands we're now considering the total time of a command as the
time spent on call() + the time spent on replying when unblocked.
- For Modules commands that rely on background threads we're now considering the
total time of a command as the time spent on call (main thread) + the time spent on
the background thread ( if marked within `RedisModule_MeasureTimeStart()` and
`RedisModule_MeasureTimeEnd()` ) + the time spent on replying (main thread)
To test for this feature we've added a `unit/moduleapi/blockonbackground` test that relies on
a module that blocks the client and sleeps on the background for a given time.
- check blocked command that uses RedisModule_MeasureTimeStart() is tracking background time
- check blocked command that uses RedisModule_MeasureTimeStart() is tracking background time even in timeout
- check blocked command with multiple calls RedisModule_MeasureTimeStart() is tracking the total background time
- check blocked command without calling RedisModule_MeasureTimeStart() is not reporting background time
APIs added for these stream operations: add, delete, iterate and
trim (by ID or maxlength). The functions are prefixed by RM_Stream.
* RM_StreamAdd
* RM_StreamDelete
* RM_StreamIteratorStart
* RM_StreamIteratorStop
* RM_StreamIteratorNextID
* RM_StreamIteratorNextField
* RM_StreamIteratorDelete
* RM_StreamTrimByLength
* RM_StreamTrimByID
The type RedisModuleStreamID is added and functions for converting
from and to RedisModuleString.
* RM_CreateStringFromStreamID
* RM_StringToStreamID
Whenever the stream functions return REDISMODULE_ERR, errno is set to
provide additional error information.
Refactoring: The zset iterator fields in the RedisModuleKey struct
are wrapped in a union, to allow the same space to be used for type-
specific info for streams and allow future use for other key types.
BLPOP and other blocking list commands can only block on empty keys
and LPUSH only wakes up clients when the list is created.
Using the module API, it's possible to block on a non-empty key.
Unblocking a client blocked on a non-empty list (or zset) can only
be done using RedisModule_SignalKeyAsReady(). This commit tests it.
the test was misleading because the module would actually woke up on a wrong type and
re-blocked, while the test name suggests the module doesn't not wake up at all on a wrong type..
i changed the name of the test + added verification that indeed the module wakes up and gets
re-blocked after it understand it's the wrong type
This was a regression from #7625 (only in 6.2 RC2).
This makes it possible again to implement blocking list and zset
commands using the modules API.
This commit also includes a test case for the reverse: A module
unblocks a client blocked on BLPOP by inserting elements using
RedisModule_ListPush(). This already works, but it was untested.
In the distant history there was only the read flag for commands, and whatever
command that didn't have the read flag was a write one.
Then we added the write flag, but some portions of the code still used !read
Also some commands that don't work on the keyspace at all, still have the read
flag.
Changes in this commit:
1. remove the read-only flag from TIME, ECHO, ROLE and LASTSAVE
2. EXEC command used to decides if it should propagate a MULTI by looking at
the command flags (!read & !admin).
When i was about to change it to look at the write flag instead, i realized
that this would cause it not to propagate a MULTI for PUBLISH, EVAL, and
SCRIPT, all 3 are not marked as either a read command or a write one (as
they should), but all 3 are calling forceCommandPropagation.
So instead of introducing a new flag to denote a command that "writes" but
not into the keyspace, and still needs propagation, i decided to rely on
the forceCommandPropagation, and just fix the code to propagate MULTI when
needed rather than depending on the command flags at all.
The implication of my change then is that now it won't decide to propagate
MULTI when it sees one of these: SELECT, PING, INFO, COMMAND, TIME and
other commands which are neither read nor write.
3. Changing getNodeByQuery and clusterRedirectBlockedClientIfNeeded in
cluster.c to look at !write rather than read flag.
This should have no implications, since these code paths are only reachable
for commands which access keys, and these are always marked as either read
or write.
This commit improve MULTI propagation tests, for modules and a bunch of
other special cases, all of which used to pass already before that commit.
the only one that test change that uncovered a change of behavior is the
one that DELs a non-existing key, it used to propagate an empty
multi-exec block, and no longer does.
Additionally the older defrag tests are using an obsolete way to check
if the defragger is suuported (the error no longer contains "DISABLED").
this doesn't usually makes a difference since these tests are completely
skipped if the allocator is not jemalloc, but that would fail if the
allocator is a jemalloc that doesn't support defrag.
Add a new set of defrag functions that take a defrag context and allow
defragmenting memory blocks and RedisModuleStrings.
Modules can register a defrag callback which will be invoked when the
defrag process handles globals.
Modules with custom data types can also register a datatype-specific
defrag callback which is invoked for keys that require defragmentation.
The callback and associated functions support both one-step and
multi-step options, depending on the complexity of the key as exposed by
the free_effort callback.
This adds a copy callback for module data types, in order to make
modules compatible with the new COPY command.
The callback is optional and COPY will fail for keys with data types
that do not implement it.
Module blocked clients cache the response in a temporary client,
the reply list in this client would be affected by the recent fix
in #7202, but when the reply is later copied into the real client,
it would have bypassed all the checks for output buffer limit, which
would have resulted in both: responding with a partial response to
the client, and also not disconnecting it at all.
One way this was happening is when a module issued an RM_Call which would inject MULTI.
If the module command that does that was itself issued by something else that already did
added MULTI (e.g. another module, or a Lua script), it would have caused nested MULTI.
In fact the MULTI state in the client or the MULTI_EMITTED flag in the context isn't
the right indication that we need to propagate MULTI or not, because on a nested calls
(possibly a module action called by a keyspace event of another module action), these
flags aren't retained / reflected.
instead there's now a global propagate_in_transaction flag for that.
in addition to that, we now have a global in_eval and in_exec flags, to serve the flags
of RM_GetContextFlags, since their dependence on the current client is wrong for the same
reasons mentioned above.
Fixes#7923.
This PR appropriates the special `&` symbol (because `@` and `*` are taken),
followed by a literal value or pattern for describing the Pub/Sub patterns that
an ACL user can interact with. It is similar to the existing key patterns
mechanism in function (additive) and implementation (copy-pasta). It also adds
the allchannels and resetchannels ACL keywords, naturally.
The default user is given allchannels permissions, whereas new users get
whatever is defined by the acl-pubsub-default configuration directive. For
backward compatibility in 6.2, the default of this directive is allchannels but
this is likely to be changed to resetchannels in the next major version for
stronger default security settings.
Unless allchannels is set for the user, channel access permissions are checked
as follows :
* Calls to both PUBLISH and SUBSCRIBE will fail unless a pattern matching the
argumentative channel name(s) exists for the user.
* Calls to PSUBSCRIBE will fail unless the pattern(s) provided as an argument
literally exist(s) in the user's list.
Such failures are logged to the ACL log.
Runtime changes to channel permissions for a user with existing subscribing
clients cause said clients to disconnect unless the new permissions permit the
connections to continue. Note, however, that PSUBSCRIBErs' patterns are matched
literally, so given the change bar:* -> b*, pattern subscribers to bar:* will be
disconnected.
Notes/questions:
* UNSUBSCRIBE, PUNSUBSCRIBE and PUBSUB remain unprotected due to lack of reasons
for touching them.
Blocking command should not be used with MULTI, LUA, and RM_Call. This is because,
the caller, who executes the command in this context, expects a reply.
Today, LUA and MULTI have a special (and different) treatment to blocking commands:
LUA - Most commands are marked with no-script flag which are checked when executing
and command from LUA, commands that are not marked (like XREAD) verify that their
blocking mode is not used inside LUA (by checking the CLIENT_LUA client flag).
MULTI - Command that is going to block, first verify that the client is not inside
multi (by checking the CLIENT_MULTI client flag). If the client is inside multi, they
return a result which is a match to the empty key with no timeout (for example blpop
inside MULTI will act as lpop)
For modules that perform RM_Call with blocking command, the returned results type is
REDISMODULE_REPLY_UNKNOWN and the caller can not really know what happened.
Disadvantages of the current state are:
No unified approach, LUA, MULTI, and RM_Call, each has a different treatment
Module can not safely execute blocking command (and get reply or error).
Though It is true that modules are not like LUA or MULTI and should be smarter not
to execute blocking commands on RM_Call, sometimes you want to execute a command base
on client input (for example if you create a module that provides a new scripting
language like javascript or python).
While modules (on modules command) can check for REDISMODULE_CTX_FLAGS_LUA or
REDISMODULE_CTX_FLAGS_MULTI to know not to block the client, there is no way to
check if the command came from another module using RM_Call. So there is no way
for a module to know not to block another module RM_Call execution.
This commit adds a way to unify the treatment for blocking clients by introducing
a new CLIENT_DENY_BLOCKING client flag. On LUA, MULTI, and RM_Call the new flag
turned on to signify that the client should not be blocked. A blocking command
verifies that the flag is turned off before blocking. If a blocking command sees
that the CLIENT_DENY_BLOCKING flag is on, it's not blocking and return results
which are matches to empty key with no timeout (as MULTI does today).
The new flag is checked on the following commands:
List blocking commands: BLPOP, BRPOP, BRPOPLPUSH, BLMOVE,
Zset blocking commands: BZPOPMIN, BZPOPMAX
Stream blocking commands: XREAD, XREADGROUP
SUBSCRIBE, PSUBSCRIBE, MONITOR
In addition, the new flag is turned on inside the AOF client, we do not want to
block the AOF client to prevent deadlocks and commands ordering issues (and there
is also an existing assert in the code that verifies it).
To keep backward compatibility on LUA, all the no-script flags on existing commands
were kept untouched. In addition, a LUA special treatment on XREAD and XREADGROUP was kept.
To keep backward compatibility on MULTI (which today allows SUBSCRIBE, and PSUBSCRIBE).
We added a special treatment on those commands to allow executing them on MULTI.
The only backward compatibility issue that this PR introduces is that now MONITOR
is not allowed inside MULTI.
Tests were added to verify blocking commands are not blocking the client on LUA, MULTI,
or RM_Call. Tests were added to verify the module can check for CLIENT_DENY_BLOCKING flag.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Itamar Haber <itamar@redislabs.com>
