1. default value of always-show-logo was not consistent with the default in the code
2. comment about cluster-replica-no-failover is wrong since we can only do manually failover upon replicas
3. improve description about always-show-logo
During long running scripts or loading RDB/AOF, we may need to do some
defragging. Since processEventsWhileBlocked is called periodically at
unknown intervals, and many cron jobs either depend on run_with_period
(including active defrag), or rely on being called at server.hz rate
(i.e. active defrag knows ho much time to run by looking at server.hz),
the whileBlockedCron may have to run a loop triggering the cron jobs in it
(currently only active defrag) several times.
Other changes:
- Adding a test for defrag during aof loading.
- Changing key-load-delay config to take negative values for fractions
of a microsecond sleep
DEBUG ZIPLIST <key> currently returns the following error string if the
key is not a ziplist: "ERR Not an sds encoded string.". This looks like
an accidental copy/paste error from the error returned in the else if
branch above where this string is returned if the key is not an sds
string. The command was added in
ac61f90625 and looking at the commit,
nothing indicates that it is not an accidental typo.
The error string now returns a correct error: "Not a ziplist encoded
object", which accurately describes the error.
This fixes the issue described in CVE-2014-5461. At this time we cannot
confirm that the original issue has a real impact on Redis, but it is
included as an extra safety measure.
The previous algorithm is of O(n^2) time complexity.
It would have run through the ziplist entries one by one, each time doing a `realloc` and a
`memmove` (moving the entire tail of the ziplist).
The new algorithm is O(n), it runs over all the records once, computing the size of the `realloc`
needed, then does one `realloc`, and run thought the records again doing many smaller `memmove`s,
each time moving just one record.
So this change reduces many reallocs, and moves each record just once.
Co-authored-by: zhumaohua <zhumaohua@megvii.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Update adds a general source for retrieving a monotonic time.
In addition, AE has been updated to utilize the new monotonic
clock for timer processing.
This performance improvement is **not** enabled in a default build due to various H/W compatibility
concerns, see README.md for details. It does however change the default use of gettimeofday with
clock_gettime and somewhat improves performance.
This update provides the following
1. An interface for retrieving a monotonic clock. getMonotonicUs returns a uint64_t (aka monotime)
with the number of micro-seconds from an arbitrary point. No more messing with tv_sec/tv_usec.
Simple routines are provided for measuring elapsed milli-seconds or elapsed micro-seconds (the
most common use case for a monotonic timer). No worries about time moving backwards.
2. High-speed assembler implementation for x86 and ARM. The standard method for retrieving the
monotonic clock is POSIX.1b (1993): clock_gettime(CLOCK_MONOTONIC, timespec*). However, most
modern processors provide a constant speed instruction clock which can be retrieved in a fraction
of the time that it takes to call clock_gettime. For x86, this is provided by the RDTSC
instruction. For ARM, this is provided by the CNTVCT_EL0 instruction. As a compile-time option,
these high-speed timers can be chosen. (Default is POSIX clock_gettime.)
3. Refactor of event loop timers. The timer processing in ae.c has been refactored to use the new
monotonic clock interface. This results in simpler/cleaner logic and improved performance.
65a3307bc (released in 6.0.6) has a side effect, when processCommand
rejects a command with pre-made shared object error string, it trims the
newlines from the end of the string. if that string is later used with
addReply, the newline will be missing, breaking the protocol, and
leaving the client hung.
It seems that the only scenario which this happens is when replying with
-LOADING to some command, and later using that reply from the CONFIG
SET command (still during loading). this will result in hung client.
Refactoring the code in order to avoid trimming these newlines from
shared string objects, and do the newline trimming only in other cases
where it's needed.
Co-authored-by: Guy Benoish <guy.benoish@redislabs.com>
During a long AOF or RDB loading, the memory stats were not updated, and
INFO would return stale data, specifically about fragmentation and RSS.
In the past some of these were sampled directly inside the INFO command,
but were moved to cron as an optimization.
This commit introduces a concept of loadingCron which should take
some of the responsibilities of serverCron.
It attempts to limit it's rate to approximately the server Hz, but may
not be very accurate.
In order to avoid too many system call, we use the cached ustime, and
also make sure to update it in both AOF loading and RDB loading inside
processEventsWhileBlocked (it seems AOF loading was missing it).
If the server gets MULTI command followed by only read
commands, and right before it gets the EXEC it reaches OOM,
the client will get OOM response.
So, from now on, it will get OOM response only if there was
at least one command that was tagged with `use-memory` flag
A first step to enable a consistent full percentile analysis on query latency so that we can fully understand the performance and stability characteristics of the redis-server system we are measuring. It also improves the instantaneous reported metrics, and the csv output format.
Otherwise, it is treated as a single allocation and freed synchronously. The following logic is used for estimating the effort in constant-ish time complexity:
1. Check the number of nodes.
1. Add an allocation for each consumer group registered inside the stream.
1. Check the number of PELs in the first CG, and then add this count times the number of CGs.
1. Check the number of consumers in the first CG, and then add this count times the number of CGs.
The previous fix using _Atomic was insufficient, since we check and set it in
different places.
The implications of this bug are just that a portion of the bug report will be shown
twice, in the race case of two concurrent crashes.
When calling to LPOS command when RANK is higher than matches,
the return value is non valid response. For example:
```
LPUSH l a
:1
LPOS l b RANK 5 COUNT 10
*-4
```
It may break client-side parser.
Now, we count how many replies were replied in the array.
```
LPUSH l a
:1
LPOS l b RANK 5 COUNT 10
*0
```
After fork, the child process(redis-aof-rewrite) will get the fd opened
by the parent process(redis), when redis killed by kill -9, it will not
graceful exit(call prepareForShutdown()), so redis-aof-rewrite thread may still
alive, the fd(lock) will still be held by redis-aof-rewrite thread, and
redis restart will fail to get lock, means fail to start.
This issue was causing failures in the cluster tests in github actions.
Co-authored-by: Oran Agra <oran@redislabs.com>
Since users often post just the crash log in github issues, the log
print that's above it is missing.
No reason not to include the size in the panic message itself.
65a3307bc9 added rejectCommand which takes an robj reply and passes it
through addReplyErrorSafe to addReplyErrorLength.
The robj contains newline at it's end, but addReplyErrorSafe converts it
to spaces, and passes it to addReplyErrorLength which adds the protocol
newlines.
The result was that most error replies (like OOM) had extra two trailing
spaces in them.
Avoid re-configuring (and validating) SSL/TLS configuration on `CONFIG
SET` when TLS is not actively enabled for incoming connections, cluster
bus or replication.
This fixes failures when tests run without `--tls` on binaries that were
built with TLS support.
An additional benefit is that it's now possible to perform a multi-step
configuration process while TLS is disabled. The new configuration will
be verified and applied only when TLS is effectively enabled.
This resolves an issue with sentinel that was created when hiredis was recently updated.
this was due to sds symbol names clashing, since hiredis now includes different implementation
of sdsrange than the one in redis.
The state of things is that redis-benchamrk and redis-cli include only hiredis sds implementation.
redis-cli even operates (calls sdscatlen) on sds that's allocated by hiredis.
Sentinel however has both implementations of the sds library in it (now each with it's own unique
symbols).
In order to keep the redismodule.h self-contained but still usable with
gcc v10 and later, annotate each API function tentative definition with
the __common__ attribute. This avoids the 'multiple definition' errors
modules will otherwise see for all API functions at link time.
Further details at gcc.gnu.org/gcc-10/porting_to.html
Turn the existing __attribute__ ((unused)), ((__common__)) and ((print))
annotations into conditional macros for any compilers not accepting this
syntax. These macros only expand to API annotations under gcc.
Provide a pre- and post- macro for every API function, so that they can
be defined differently by the file that includes redismodule.h.
Removing REDISMODULE_API_FUNC in the interest of keeping the function
declarations readable.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Client that issued WAIT last will most likely have the highest replication offset, so imagine a probably common case where all clients are waiting for the same number of replicas. we prefer the loop to start from the last client (one waiting for the highest offset), so that the optimization in the function will call replicationCountAcksByOffset for each client until it found a good one, and stop calling it for the rest of the clients.
the way the loop was implemented would mean that in such case it is likely to call replicationCountAcksByOffset for all clients.
Note: the change from > to >= is not directly related to the above.
Co-authored-by: 曹正斌 <caozb@jiedaibao.com>
Add Linux kernel OOM killer control option.
This adds the ability to control the Linux OOM killer oom_score_adj
parameter for all Redis processes, depending on the process role (i.e.
master, replica, background child).
A oom-score-adj global boolean flag control this feature. In addition,
specific values can be configured using oom-score-adj-values if
additional tuning is required.
