This is what happened:
1. Instance starts, is a slave in the cluster configuration, but
actually server.masterhost is not set, so technically the instance
is acting like a master.
2. loadDataFromDisk() calls replicationCacheMasterUsingMyself() even if
the instance is a master, in the case it is logically a slave and the
cluster is enabled. So now we have a cached master even if the instance
is practically configured as a master (from the POV of
server.masterhost value and so forth).
3. clusterCron() sees that the instance requires to replicate from its
master, because logically it is a slave, so it calls
replicationSetMaster() that will in turn call
replicationCacheMasterUsingMyself(): before this commit, this call would
overwrite the old cached master, creating a memory leak.
misc:
- handle SSL_has_pending by iterating though these in beforeSleep, and setting timeout of 0 to aeProcessEvents
- fix issue with epoll signaling EPOLLHUP and EPOLLERR only to the write handlers. (needed to detect the rdb pipe was closed)
- add key-load-delay config for testing
- trim connShutdown which is no longer needed
- rioFdsetWrite -> rioFdWrite - simplified since there's no longer need to write to multiple FDs
- don't detect rdb child exited (don't call wait3) until we detect the pipe is closed
- Cleanup bad optimization from rio.c, add another one
* Introduce a connection abstraction layer for all socket operations and
integrate it across the code base.
* Provide an optional TLS connections implementation based on OpenSSL.
* Pull a newer version of hiredis with TLS support.
* Tests, redis-cli updates for TLS support.
cluster.c - stack buffer memory alignment
The pointer 'buf' is cast to a more strictly aligned pointer type
evict.c - lazyfree_lazy_eviction, lazyfree_lazy_eviction always called
defrag.c - bug in dead code
server.c - casting was missing parenthesis
rax.c - indentation / newline suggested an 'else if' was intended
It seeems that since I added the creation of the jemalloc thread redis
sometimes fails to start with the following error:
Inconsistency detected by ld.so: dl-tls.c: 493: _dl_allocate_tls_init: Assertion `listp->slotinfo[cnt].gen <= GL(dl_tls_generation)' failed!
This seems to be due to a race bug in ld.so, in which TLS creation on the
thread, collide with dlopen.
Move the creation of BIO and jemalloc threads to after modules are loaded.
plus small bugfix when trying to disable the jemalloc thread at runtime
We don't want that the API could be used directly in an unsafe way,
without checking if there is an active child. Now the safety checks are
moved directly in the function performing the operations.
We can't expect SIGUSR1 to have any specific value range, so let's
define an exit code that we can handle in a special way.
This also fixes an #include <wait.h> that is not standard.
SipHash expects a 128-bit key, and we were indeed generating 128-bits,
but restricting them to hex characters 0-9a-f, effectively giving us
only 4 bits-per-byte of key material, and 64 bits overall.
Now, we skip the hex conversion and supply 128 bits of unfiltered
random data.
* create module API for forking child processes.
* refactor duplicate code around creating and tracking forks by AOF and RDB.
* child processes listen to SIGUSR1 and dies exitFromChild in order to
eliminate a valgrind warning of unhandled signal.
* note that BGSAVE error reply has changed.
valgrind error is:
Process terminating with default action of signal 10 (SIGUSR1)
The implementation of the diskless replication was currently diskless only on the master side.
The slave side was still storing the received rdb file to the disk before loading it back in and parsing it.
This commit adds two modes to load rdb directly from socket:
1) when-empty
2) using "swapdb"
the third mode of using diskless slave by flushdb is risky and currently not included.
other changes:
--------------
distinguish between aof configuration and state so that we can re-enable aof only when sync eventually
succeeds (and not when exiting from readSyncBulkPayload after a failed attempt)
also a CONFIG GET and INFO during rdb loading would have lied
When loading rdb from the network, don't kill the server on short read (that can be a network error)
Fix rdb check when performed on preamble AOF
tests:
run replication tests for diskless slave too
make replication test a bit more aggressive
Add test for diskless load swapdb
jemalloc 5 doesn't immediately release memory back to the OS, instead there's a decaying
mechanism, which doesn't work when there's no traffic (no allocations).
this is most evident if there's no traffic after flushdb, the RSS will remain high.
1) enable jemalloc background purging
2) explicitly purge in flushdb
Now threads are stopped even when the connections drop immediately to
zero, not allowing the networking code to detect the condition and stop
the threads. serverCron() will handle that.
This is just an experiment for now, there are a couple of race
conditions, mostly harmless for the performance gain experiment that
this commit represents so far.
The general idea here is to take Redis single threaded and instead
fan-out on expansive kernel calls: write(2) in this case, but the same
concept could be easily implemented for read(2) and protcol parsing.
However just threading writes like in this commit, is enough to evaluate
if the approach is sounding.
Fixes#6012.
As long as "INFO is broken", this should be adequate IMO. Once we rework
`INFO`, perhaps into RESP3, this implementation should be revisited.
Adding another new filed categories at the end of
command reply, it's easy to read and distinguish
flags and categories, also compatible with old format.
That's not REALLY needed, but... right now with LASTSAVE being the only
command tagged as "admin" but not "dangerous" what happens is that after
rewrites the rewrite engine will produce from the rules:
user default on +@all ~* -@dangerous nopass
The rewrite:
user default on nopass ~* +@all -@admin -@dangerous +lastsave
Which is correct but will have users wondering about why LASTSAVE has
something special.
Since LASTSAVE after all also leaks information about the underlying
server configuration, that may not be great for SAAS vendors, let's tag
it as dangerous as well and forget about this issue :-)
This way the behavior is very similar to the past one.
This is useful in order to remember the user she probably failed to
configure a password correctly.
these metrics become negative when RSS is smaller than the used_memory.
This can easily happen when the program allocated a lot of memory and haven't
written to it yet, in which case the kernel doesn't allocate any pages to the process
If we encounter an unsupported protocol in the "bind" list, don't
ipso-facto consider it a fatal error. We continue to abort startup if
there are no listening sockets at all.
This ensures that the lack of IPv6 support does not prevent Redis from
starting on Debian where we try to bind to the ::1 interface by default
(via "bind 127.0.0.1 ::1"). A machine with IPv6 disabled (such as some
container systems) would simply fail to start Redis after the initiall
call to apt(8).
This is similar to the case for where "bind" is not specified:
https://github.com/antirez/redis/issues/3894
... and was based on the corresponding PR:
https://github.com/antirez/redis/pull/4108
... but also adds EADDRNOTAVAIL to the list of errors to catch which I
believe is missing from there.
This issue was raised in Debian as both <https://bugs.debian.org/900284>
& <https://bugs.debian.org/914354>.
This really helps spot it in the logs, otherwise it does not look like a
warning/error. For example:
Creating Server TCP listening socket ::1:6379: bind: Cannot assign requested address
... is not nearly as clear as:
Could not create server TCP listening listening socket ::1:6379: bind: Cannot assign requested address
server.hz was uninitialized between initServerConfig and initServer.
this can lead to someone (e.g. queued modules) doing createObject,
and accessing an uninitialized variable, that can potentially be 0,
and lead to a crash.
When HAVE_MALLOC_SIZE is false, each call to zrealloc causes used_memory
to increase by PREFIX_SIZE more than it should, due to mis-matched
accounting between the original zmalloc (which includes PREFIX size in
its increment) and zrealloc (which misses it from its decrement).
I've also supplied a command-line test to easily demonstrate the
problem. It's not wired into the test framework, because I don't know
TCL so I'm not sure how to automate it.
xadd with id * generates random stream id
xadd & xtrim with approximate maxlen count may
trim stream randomly
xinfo may get random radix-tree-keys/nodes
xpending may get random idletime
xclaim: master and slave may have different
idletime in stream
Processing command from the master while the slave is in busy state is
not correct, however we cannot, also, just reply -BUSY to the
replication stream commands from the master. The correct solution is to
stop processing data from the master, but just accumulate the stream
into the buffers and resume the processing later.
Related to #5297.
