redict/tests/unit/pubsub.tcl

507 lines
18 KiB
Tcl
Raw Normal View History

start_server {tags {"pubsub network"}} {
Improve test suite to handle external servers better. (#9033) This commit revives the improves the ability to run the test suite against external servers, instead of launching and managing `redis-server` processes as part of the test fixture. This capability existed in the past, using the `--host` and `--port` options. However, it was quite limited and mostly useful when running a specific tests. Attempting to run larger chunks of the test suite experienced many issues: * Many tests depend on being able to start and control `redis-server` themselves, and there's no clear distinction between external server compatible and other tests. * Cluster mode is not supported (resulting with `CROSSSLOT` errors). This PR cleans up many things and makes it possible to run the entire test suite against an external server. It also provides more fine grained controls to handle cases where the external server supports a subset of the Redis commands, limited number of databases, cluster mode, etc. The tests directory now contains a `README.md` file that describes how this works. This commit also includes additional cleanups and fixes: * Tests can now be tagged. * Tag-based selection is now unified across `start_server`, `tags` and `test`. * More information is provided about skipped or ignored tests. * Repeated patterns in tests have been extracted to common procedures, both at a global level and on a per-test file basis. * Cleaned up some cases where test setup was based on a previous test executing (a major anti-pattern that repeats itself in many places). * Cleaned up some cases where test teardown was not part of a test (in the future we should have dedicated teardown code that executes even when tests fail). * Fixed some tests that were flaky running on external servers.
2021-06-09 08:13:24 -04:00
if {$::singledb} {
set db 0
} else {
set db 9
}
Add reply_schema to command json files (internal for now) (#10273) Work in progress towards implementing a reply schema as part of COMMAND DOCS, see #9845 Since ironing the details of the reply schema of each and every command can take a long time, we would like to merge this PR when the infrastructure is ready, and let this mature in the unstable branch. Meanwhile the changes of this PR are internal, they are part of the repo, but do not affect the produced build. ### Background In #9656 we add a lot of information about Redis commands, but we are missing information about the replies ### Motivation 1. Documentation. This is the primary goal. 2. It should be possible, based on the output of COMMAND, to be able to generate client code in typed languages. In order to do that, we need Redis to tell us, in detail, what each reply looks like. 3. We would like to build a fuzzer that verifies the reply structure (for now we use the existing testsuite, see the "Testing" section) ### Schema The idea is to supply some sort of schema for the various replies of each command. The schema will describe the conceptual structure of the reply (for generated clients), as defined in RESP3. Note that the reply structure itself may change, depending on the arguments (e.g. `XINFO STREAM`, with and without the `FULL` modifier) We decided to use the standard json-schema (see https://json-schema.org/) as the reply-schema. Example for `BZPOPMIN`: ``` "reply_schema": { "oneOf": [ { "description": "Timeout reached and no elements were popped.", "type": "null" }, { "description": "The keyname, popped member, and its score.", "type": "array", "minItems": 3, "maxItems": 3, "items": [ { "description": "Keyname", "type": "string" }, { "description": "Member", "type": "string" }, { "description": "Score", "type": "number" } ] } ] } ``` #### Notes 1. It is ok that some commands' reply structure depends on the arguments and it's the caller's responsibility to know which is the relevant one. this comes after looking at other request-reply systems like OpenAPI, where the reply schema can also be oneOf and the caller is responsible to know which schema is the relevant one. 2. The reply schemas will describe RESP3 replies only. even though RESP3 is structured, we want to use reply schema for documentation (and possibly to create a fuzzer that validates the replies) 3. For documentation, the description field will include an explanation of the scenario in which the reply is sent, including any relation to arguments. for example, for `ZRANGE`'s two schemas we will need to state that one is with `WITHSCORES` and the other is without. 4. For documentation, there will be another optional field "notes" in which we will add a short description of the representation in RESP2, in case it's not trivial (RESP3's `ZRANGE`'s nested array vs. RESP2's flat array, for example) Given the above: 1. We can generate the "return" section of all commands in [redis-doc](https://redis.io/commands/) (given that "description" and "notes" are comprehensive enough) 2. We can generate a client in a strongly typed language (but the return type could be a conceptual `union` and the caller needs to know which schema is relevant). see the section below for RESP2 support. 3. We can create a fuzzer for RESP3. ### Limitations (because we are using the standard json-schema) The problem is that Redis' replies are more diverse than what the json format allows. This means that, when we convert the reply to a json (in order to validate the schema against it), we lose information (see the "Testing" section below). The other option would have been to extend the standard json-schema (and json format) to include stuff like sets, bulk-strings, error-string, etc. but that would mean also extending the schema-validator - and that seemed like too much work, so we decided to compromise. Examples: 1. We cannot tell the difference between an "array" and a "set" 2. We cannot tell the difference between simple-string and bulk-string 3. we cannot verify true uniqueness of items in commands like ZRANGE: json-schema doesn't cover the case of two identical members with different scores (e.g. `[["m1",6],["m1",7]]`) because `uniqueItems` compares (member,score) tuples and not just the member name. ### Testing This commit includes some changes inside Redis in order to verify the schemas (existing and future ones) are indeed correct (i.e. describe the actual response of Redis). To do that, we added a debugging feature to Redis that causes it to produce a log of all the commands it executed and their replies. For that, Redis needs to be compiled with `-DLOG_REQ_RES` and run with `--reg-res-logfile <file> --client-default-resp 3` (the testsuite already does that if you run it with `--log-req-res --force-resp3`) You should run the testsuite with the above args (and `--dont-clean`) in order to make Redis generate `.reqres` files (same dir as the `stdout` files) which contain request-response pairs. These files are later on processed by `./utils/req-res-log-validator.py` which does: 1. Goes over req-res files, generated by redis-servers, spawned by the testsuite (see logreqres.c) 2. For each request-response pair, it validates the response against the request's reply_schema (obtained from the extended COMMAND DOCS) 5. In order to get good coverage of the Redis commands, and all their different replies, we chose to use the existing redis test suite, rather than attempt to write a fuzzer. #### Notes about RESP2 1. We will not be able to use the testing tool to verify RESP2 replies (we are ok with that, it's time to accept RESP3 as the future RESP) 2. Since the majority of the test suite is using RESP2, and we want the server to reply with RESP3 so that we can validate it, we will need to know how to convert the actual reply to the one expected. - number and boolean are always strings in RESP2 so the conversion is easy - objects (maps) are always a flat array in RESP2 - others (nested array in RESP3's `ZRANGE` and others) will need some special per-command handling (so the client will not be totally auto-generated) Example for ZRANGE: ``` "reply_schema": { "anyOf": [ { "description": "A list of member elements", "type": "array", "uniqueItems": true, "items": { "type": "string" } }, { "description": "Members and their scores. Returned in case `WITHSCORES` was used.", "notes": "In RESP2 this is returned as a flat array", "type": "array", "uniqueItems": true, "items": { "type": "array", "minItems": 2, "maxItems": 2, "items": [ { "description": "Member", "type": "string" }, { "description": "Score", "type": "number" } ] } } ] } ``` ### Other changes 1. Some tests that behave differently depending on the RESP are now being tested for both RESP, regardless of the special log-req-res mode ("Pub/Sub PING" for example) 2. Update the history field of CLIENT LIST 3. Added basic tests for commands that were not covered at all by the testsuite ### TODO - [x] (maybe a different PR) add a "condition" field to anyOf/oneOf schemas that refers to args. e.g. when `SET` return NULL, the condition is `arguments.get||arguments.condition`, for `OK` the condition is `!arguments.get`, and for `string` the condition is `arguments.get` - https://github.com/redis/redis/issues/11896 - [x] (maybe a different PR) also run `runtest-cluster` in the req-res logging mode - [x] add the new tests to GH actions (i.e. compile with `-DLOG_REQ_RES`, run the tests, and run the validator) - [x] (maybe a different PR) figure out a way to warn about (sub)schemas that are uncovered by the output of the tests - https://github.com/redis/redis/issues/11897 - [x] (probably a separate PR) add all missing schemas - [x] check why "SDOWN is triggered by misconfigured instance replying with errors" fails with --log-req-res - [x] move the response transformers to their own file (run both regular, cluster, and sentinel tests - need to fight with the tcl including mechanism a bit) - [x] issue: module API - https://github.com/redis/redis/issues/11898 - [x] (probably a separate PR): improve schemas: add `required` to `object`s - https://github.com/redis/redis/issues/11899 Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com> Co-authored-by: Hanna Fadida <hanna.fadida@redislabs.com> Co-authored-by: Oran Agra <oran@redislabs.com> Co-authored-by: Shaya Potter <shaya@redislabs.com>
2023-03-11 03:14:16 -05:00
foreach resp {2 3} {
2014-07-18 06:03:31 -04:00
set rd1 [redis_deferring_client]
Add reply_schema to command json files (internal for now) (#10273) Work in progress towards implementing a reply schema as part of COMMAND DOCS, see #9845 Since ironing the details of the reply schema of each and every command can take a long time, we would like to merge this PR when the infrastructure is ready, and let this mature in the unstable branch. Meanwhile the changes of this PR are internal, they are part of the repo, but do not affect the produced build. ### Background In #9656 we add a lot of information about Redis commands, but we are missing information about the replies ### Motivation 1. Documentation. This is the primary goal. 2. It should be possible, based on the output of COMMAND, to be able to generate client code in typed languages. In order to do that, we need Redis to tell us, in detail, what each reply looks like. 3. We would like to build a fuzzer that verifies the reply structure (for now we use the existing testsuite, see the "Testing" section) ### Schema The idea is to supply some sort of schema for the various replies of each command. The schema will describe the conceptual structure of the reply (for generated clients), as defined in RESP3. Note that the reply structure itself may change, depending on the arguments (e.g. `XINFO STREAM`, with and without the `FULL` modifier) We decided to use the standard json-schema (see https://json-schema.org/) as the reply-schema. Example for `BZPOPMIN`: ``` "reply_schema": { "oneOf": [ { "description": "Timeout reached and no elements were popped.", "type": "null" }, { "description": "The keyname, popped member, and its score.", "type": "array", "minItems": 3, "maxItems": 3, "items": [ { "description": "Keyname", "type": "string" }, { "description": "Member", "type": "string" }, { "description": "Score", "type": "number" } ] } ] } ``` #### Notes 1. It is ok that some commands' reply structure depends on the arguments and it's the caller's responsibility to know which is the relevant one. this comes after looking at other request-reply systems like OpenAPI, where the reply schema can also be oneOf and the caller is responsible to know which schema is the relevant one. 2. The reply schemas will describe RESP3 replies only. even though RESP3 is structured, we want to use reply schema for documentation (and possibly to create a fuzzer that validates the replies) 3. For documentation, the description field will include an explanation of the scenario in which the reply is sent, including any relation to arguments. for example, for `ZRANGE`'s two schemas we will need to state that one is with `WITHSCORES` and the other is without. 4. For documentation, there will be another optional field "notes" in which we will add a short description of the representation in RESP2, in case it's not trivial (RESP3's `ZRANGE`'s nested array vs. RESP2's flat array, for example) Given the above: 1. We can generate the "return" section of all commands in [redis-doc](https://redis.io/commands/) (given that "description" and "notes" are comprehensive enough) 2. We can generate a client in a strongly typed language (but the return type could be a conceptual `union` and the caller needs to know which schema is relevant). see the section below for RESP2 support. 3. We can create a fuzzer for RESP3. ### Limitations (because we are using the standard json-schema) The problem is that Redis' replies are more diverse than what the json format allows. This means that, when we convert the reply to a json (in order to validate the schema against it), we lose information (see the "Testing" section below). The other option would have been to extend the standard json-schema (and json format) to include stuff like sets, bulk-strings, error-string, etc. but that would mean also extending the schema-validator - and that seemed like too much work, so we decided to compromise. Examples: 1. We cannot tell the difference between an "array" and a "set" 2. We cannot tell the difference between simple-string and bulk-string 3. we cannot verify true uniqueness of items in commands like ZRANGE: json-schema doesn't cover the case of two identical members with different scores (e.g. `[["m1",6],["m1",7]]`) because `uniqueItems` compares (member,score) tuples and not just the member name. ### Testing This commit includes some changes inside Redis in order to verify the schemas (existing and future ones) are indeed correct (i.e. describe the actual response of Redis). To do that, we added a debugging feature to Redis that causes it to produce a log of all the commands it executed and their replies. For that, Redis needs to be compiled with `-DLOG_REQ_RES` and run with `--reg-res-logfile <file> --client-default-resp 3` (the testsuite already does that if you run it with `--log-req-res --force-resp3`) You should run the testsuite with the above args (and `--dont-clean`) in order to make Redis generate `.reqres` files (same dir as the `stdout` files) which contain request-response pairs. These files are later on processed by `./utils/req-res-log-validator.py` which does: 1. Goes over req-res files, generated by redis-servers, spawned by the testsuite (see logreqres.c) 2. For each request-response pair, it validates the response against the request's reply_schema (obtained from the extended COMMAND DOCS) 5. In order to get good coverage of the Redis commands, and all their different replies, we chose to use the existing redis test suite, rather than attempt to write a fuzzer. #### Notes about RESP2 1. We will not be able to use the testing tool to verify RESP2 replies (we are ok with that, it's time to accept RESP3 as the future RESP) 2. Since the majority of the test suite is using RESP2, and we want the server to reply with RESP3 so that we can validate it, we will need to know how to convert the actual reply to the one expected. - number and boolean are always strings in RESP2 so the conversion is easy - objects (maps) are always a flat array in RESP2 - others (nested array in RESP3's `ZRANGE` and others) will need some special per-command handling (so the client will not be totally auto-generated) Example for ZRANGE: ``` "reply_schema": { "anyOf": [ { "description": "A list of member elements", "type": "array", "uniqueItems": true, "items": { "type": "string" } }, { "description": "Members and their scores. Returned in case `WITHSCORES` was used.", "notes": "In RESP2 this is returned as a flat array", "type": "array", "uniqueItems": true, "items": { "type": "array", "minItems": 2, "maxItems": 2, "items": [ { "description": "Member", "type": "string" }, { "description": "Score", "type": "number" } ] } } ] } ``` ### Other changes 1. Some tests that behave differently depending on the RESP are now being tested for both RESP, regardless of the special log-req-res mode ("Pub/Sub PING" for example) 2. Update the history field of CLIENT LIST 3. Added basic tests for commands that were not covered at all by the testsuite ### TODO - [x] (maybe a different PR) add a "condition" field to anyOf/oneOf schemas that refers to args. e.g. when `SET` return NULL, the condition is `arguments.get||arguments.condition`, for `OK` the condition is `!arguments.get`, and for `string` the condition is `arguments.get` - https://github.com/redis/redis/issues/11896 - [x] (maybe a different PR) also run `runtest-cluster` in the req-res logging mode - [x] add the new tests to GH actions (i.e. compile with `-DLOG_REQ_RES`, run the tests, and run the validator) - [x] (maybe a different PR) figure out a way to warn about (sub)schemas that are uncovered by the output of the tests - https://github.com/redis/redis/issues/11897 - [x] (probably a separate PR) add all missing schemas - [x] check why "SDOWN is triggered by misconfigured instance replying with errors" fails with --log-req-res - [x] move the response transformers to their own file (run both regular, cluster, and sentinel tests - need to fight with the tcl including mechanism a bit) - [x] issue: module API - https://github.com/redis/redis/issues/11898 - [x] (probably a separate PR): improve schemas: add `required` to `object`s - https://github.com/redis/redis/issues/11899 Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com> Co-authored-by: Hanna Fadida <hanna.fadida@redislabs.com> Co-authored-by: Oran Agra <oran@redislabs.com> Co-authored-by: Shaya Potter <shaya@redislabs.com>
2023-03-11 03:14:16 -05:00
if {[lsearch $::denytags "resp3"] >= 0} {
if {$resp == 3} {continue}
} elseif {$::force_resp3} {
if {$resp == 2} {continue}
}
$rd1 hello $resp
$rd1 read
test "Pub/Sub PING on RESP$resp" {
subscribe $rd1 somechannel
# While subscribed to non-zero channels PING works in Pub/Sub mode.
$rd1 ping
$rd1 ping "foo"
# In RESP3, the SUBSCRIBEd client can issue any command and get a reply, so the PINGs are standard
# In RESP2, only a handful of commands are allowed after a client is SUBSCRIBED (PING is one of them).
# For some reason, the reply in that case is an array with two elements: "pong" and argv[1] or an empty string
# God knows why. Done in commit 2264b981
if {$resp == 3} {
assert_equal {PONG} [$rd1 read]
assert_equal {foo} [$rd1 read]
} else {
assert_equal {pong {}} [$rd1 read]
assert_equal {pong foo} [$rd1 read]
}
unsubscribe $rd1 somechannel
# Now we are unsubscribed, PING should just return PONG.
$rd1 ping
assert_equal {PONG} [$rd1 read]
}
2014-07-18 06:03:31 -04:00
$rd1 close
Add reply_schema to command json files (internal for now) (#10273) Work in progress towards implementing a reply schema as part of COMMAND DOCS, see #9845 Since ironing the details of the reply schema of each and every command can take a long time, we would like to merge this PR when the infrastructure is ready, and let this mature in the unstable branch. Meanwhile the changes of this PR are internal, they are part of the repo, but do not affect the produced build. ### Background In #9656 we add a lot of information about Redis commands, but we are missing information about the replies ### Motivation 1. Documentation. This is the primary goal. 2. It should be possible, based on the output of COMMAND, to be able to generate client code in typed languages. In order to do that, we need Redis to tell us, in detail, what each reply looks like. 3. We would like to build a fuzzer that verifies the reply structure (for now we use the existing testsuite, see the "Testing" section) ### Schema The idea is to supply some sort of schema for the various replies of each command. The schema will describe the conceptual structure of the reply (for generated clients), as defined in RESP3. Note that the reply structure itself may change, depending on the arguments (e.g. `XINFO STREAM`, with and without the `FULL` modifier) We decided to use the standard json-schema (see https://json-schema.org/) as the reply-schema. Example for `BZPOPMIN`: ``` "reply_schema": { "oneOf": [ { "description": "Timeout reached and no elements were popped.", "type": "null" }, { "description": "The keyname, popped member, and its score.", "type": "array", "minItems": 3, "maxItems": 3, "items": [ { "description": "Keyname", "type": "string" }, { "description": "Member", "type": "string" }, { "description": "Score", "type": "number" } ] } ] } ``` #### Notes 1. It is ok that some commands' reply structure depends on the arguments and it's the caller's responsibility to know which is the relevant one. this comes after looking at other request-reply systems like OpenAPI, where the reply schema can also be oneOf and the caller is responsible to know which schema is the relevant one. 2. The reply schemas will describe RESP3 replies only. even though RESP3 is structured, we want to use reply schema for documentation (and possibly to create a fuzzer that validates the replies) 3. For documentation, the description field will include an explanation of the scenario in which the reply is sent, including any relation to arguments. for example, for `ZRANGE`'s two schemas we will need to state that one is with `WITHSCORES` and the other is without. 4. For documentation, there will be another optional field "notes" in which we will add a short description of the representation in RESP2, in case it's not trivial (RESP3's `ZRANGE`'s nested array vs. RESP2's flat array, for example) Given the above: 1. We can generate the "return" section of all commands in [redis-doc](https://redis.io/commands/) (given that "description" and "notes" are comprehensive enough) 2. We can generate a client in a strongly typed language (but the return type could be a conceptual `union` and the caller needs to know which schema is relevant). see the section below for RESP2 support. 3. We can create a fuzzer for RESP3. ### Limitations (because we are using the standard json-schema) The problem is that Redis' replies are more diverse than what the json format allows. This means that, when we convert the reply to a json (in order to validate the schema against it), we lose information (see the "Testing" section below). The other option would have been to extend the standard json-schema (and json format) to include stuff like sets, bulk-strings, error-string, etc. but that would mean also extending the schema-validator - and that seemed like too much work, so we decided to compromise. Examples: 1. We cannot tell the difference between an "array" and a "set" 2. We cannot tell the difference between simple-string and bulk-string 3. we cannot verify true uniqueness of items in commands like ZRANGE: json-schema doesn't cover the case of two identical members with different scores (e.g. `[["m1",6],["m1",7]]`) because `uniqueItems` compares (member,score) tuples and not just the member name. ### Testing This commit includes some changes inside Redis in order to verify the schemas (existing and future ones) are indeed correct (i.e. describe the actual response of Redis). To do that, we added a debugging feature to Redis that causes it to produce a log of all the commands it executed and their replies. For that, Redis needs to be compiled with `-DLOG_REQ_RES` and run with `--reg-res-logfile <file> --client-default-resp 3` (the testsuite already does that if you run it with `--log-req-res --force-resp3`) You should run the testsuite with the above args (and `--dont-clean`) in order to make Redis generate `.reqres` files (same dir as the `stdout` files) which contain request-response pairs. These files are later on processed by `./utils/req-res-log-validator.py` which does: 1. Goes over req-res files, generated by redis-servers, spawned by the testsuite (see logreqres.c) 2. For each request-response pair, it validates the response against the request's reply_schema (obtained from the extended COMMAND DOCS) 5. In order to get good coverage of the Redis commands, and all their different replies, we chose to use the existing redis test suite, rather than attempt to write a fuzzer. #### Notes about RESP2 1. We will not be able to use the testing tool to verify RESP2 replies (we are ok with that, it's time to accept RESP3 as the future RESP) 2. Since the majority of the test suite is using RESP2, and we want the server to reply with RESP3 so that we can validate it, we will need to know how to convert the actual reply to the one expected. - number and boolean are always strings in RESP2 so the conversion is easy - objects (maps) are always a flat array in RESP2 - others (nested array in RESP3's `ZRANGE` and others) will need some special per-command handling (so the client will not be totally auto-generated) Example for ZRANGE: ``` "reply_schema": { "anyOf": [ { "description": "A list of member elements", "type": "array", "uniqueItems": true, "items": { "type": "string" } }, { "description": "Members and their scores. Returned in case `WITHSCORES` was used.", "notes": "In RESP2 this is returned as a flat array", "type": "array", "uniqueItems": true, "items": { "type": "array", "minItems": 2, "maxItems": 2, "items": [ { "description": "Member", "type": "string" }, { "description": "Score", "type": "number" } ] } } ] } ``` ### Other changes 1. Some tests that behave differently depending on the RESP are now being tested for both RESP, regardless of the special log-req-res mode ("Pub/Sub PING" for example) 2. Update the history field of CLIENT LIST 3. Added basic tests for commands that were not covered at all by the testsuite ### TODO - [x] (maybe a different PR) add a "condition" field to anyOf/oneOf schemas that refers to args. e.g. when `SET` return NULL, the condition is `arguments.get||arguments.condition`, for `OK` the condition is `!arguments.get`, and for `string` the condition is `arguments.get` - https://github.com/redis/redis/issues/11896 - [x] (maybe a different PR) also run `runtest-cluster` in the req-res logging mode - [x] add the new tests to GH actions (i.e. compile with `-DLOG_REQ_RES`, run the tests, and run the validator) - [x] (maybe a different PR) figure out a way to warn about (sub)schemas that are uncovered by the output of the tests - https://github.com/redis/redis/issues/11897 - [x] (probably a separate PR) add all missing schemas - [x] check why "SDOWN is triggered by misconfigured instance replying with errors" fails with --log-req-res - [x] move the response transformers to their own file (run both regular, cluster, and sentinel tests - need to fight with the tcl including mechanism a bit) - [x] issue: module API - https://github.com/redis/redis/issues/11898 - [x] (probably a separate PR): improve schemas: add `required` to `object`s - https://github.com/redis/redis/issues/11899 Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com> Co-authored-by: Hanna Fadida <hanna.fadida@redislabs.com> Co-authored-by: Oran Agra <oran@redislabs.com> Co-authored-by: Shaya Potter <shaya@redislabs.com>
2023-03-11 03:14:16 -05:00
}
2014-07-18 06:03:31 -04:00
2010-06-16 05:03:23 -04:00
test "PUBLISH/SUBSCRIBE basics" {
set rd1 [redis_deferring_client]
2010-06-15 16:40:21 -04:00
2010-06-16 05:03:23 -04:00
# subscribe to two channels
assert_equal {1 2} [subscribe $rd1 {chan1 chan2}]
2010-06-15 16:40:21 -04:00
assert_equal 1 [r publish chan1 hello]
assert_equal 1 [r publish chan2 world]
assert_equal {message chan1 hello} [$rd1 read]
assert_equal {message chan2 world} [$rd1 read]
2010-06-16 05:03:23 -04:00
# unsubscribe from one of the channels
unsubscribe $rd1 {chan1}
assert_equal 0 [r publish chan1 hello]
assert_equal 1 [r publish chan2 world]
assert_equal {message chan2 world} [$rd1 read]
2010-06-15 16:40:21 -04:00
2010-06-16 05:03:23 -04:00
# unsubscribe from the remaining channel
unsubscribe $rd1 {chan2}
assert_equal 0 [r publish chan1 hello]
assert_equal 0 [r publish chan2 world]
# clean up clients
$rd1 close
}
test "PUBLISH/SUBSCRIBE with two clients" {
set rd1 [redis_deferring_client]
set rd2 [redis_deferring_client]
assert_equal {1} [subscribe $rd1 {chan1}]
assert_equal {1} [subscribe $rd2 {chan1}]
2010-06-15 16:40:21 -04:00
assert_equal 2 [r publish chan1 hello]
assert_equal {message chan1 hello} [$rd1 read]
assert_equal {message chan1 hello} [$rd2 read]
2010-06-16 05:03:23 -04:00
# clean up clients
$rd1 close
$rd2 close
}
test "PUBLISH/SUBSCRIBE after UNSUBSCRIBE without arguments" {
set rd1 [redis_deferring_client]
assert_equal {1 2 3} [subscribe $rd1 {chan1 chan2 chan3}]
unsubscribe $rd1
assert_equal 0 [r publish chan1 hello]
assert_equal 0 [r publish chan2 hello]
assert_equal 0 [r publish chan3 hello]
# clean up clients
$rd1 close
}
test "SUBSCRIBE to one channel more than once" {
set rd1 [redis_deferring_client]
assert_equal {1 1 1} [subscribe $rd1 {chan1 chan1 chan1}]
2010-06-15 16:40:21 -04:00
assert_equal 1 [r publish chan1 hello]
2010-06-16 05:03:23 -04:00
assert_equal {message chan1 hello} [$rd1 read]
# clean up clients
$rd1 close
}
test "UNSUBSCRIBE from non-subscribed channels" {
set rd1 [redis_deferring_client]
assert_equal {0 0 0} [unsubscribe $rd1 {foo bar quux}]
# clean up clients
$rd1 close
}
test "PUBLISH/PSUBSCRIBE basics" {
set rd1 [redis_deferring_client]
# subscribe to two patterns
assert_equal {1 2} [psubscribe $rd1 {foo.* bar.*}]
assert_equal 1 [r publish foo.1 hello]
assert_equal 1 [r publish bar.1 hello]
assert_equal 0 [r publish foo1 hello]
assert_equal 0 [r publish barfoo.1 hello]
assert_equal 0 [r publish qux.1 hello]
assert_equal {pmessage foo.* foo.1 hello} [$rd1 read]
assert_equal {pmessage bar.* bar.1 hello} [$rd1 read]
# unsubscribe from one of the patterns
assert_equal {1} [punsubscribe $rd1 {foo.*}]
assert_equal 0 [r publish foo.1 hello]
assert_equal 1 [r publish bar.1 hello]
assert_equal {pmessage bar.* bar.1 hello} [$rd1 read]
# unsubscribe from the remaining pattern
assert_equal {0} [punsubscribe $rd1 {bar.*}]
assert_equal 0 [r publish foo.1 hello]
assert_equal 0 [r publish bar.1 hello]
# clean up clients
$rd1 close
}
test "PUBLISH/PSUBSCRIBE with two clients" {
set rd1 [redis_deferring_client]
set rd2 [redis_deferring_client]
assert_equal {1} [psubscribe $rd1 {chan.*}]
assert_equal {1} [psubscribe $rd2 {chan.*}]
assert_equal 2 [r publish chan.foo hello]
assert_equal {pmessage chan.* chan.foo hello} [$rd1 read]
assert_equal {pmessage chan.* chan.foo hello} [$rd2 read]
# clean up clients
$rd1 close
$rd2 close
}
test "PUBLISH/PSUBSCRIBE after PUNSUBSCRIBE without arguments" {
set rd1 [redis_deferring_client]
assert_equal {1 2 3} [psubscribe $rd1 {chan1.* chan2.* chan3.*}]
punsubscribe $rd1
assert_equal 0 [r publish chan1.hi hello]
assert_equal 0 [r publish chan2.hi hello]
assert_equal 0 [r publish chan3.hi hello]
# clean up clients
$rd1 close
}
test "PubSub messages with CLIENT REPLY OFF" {
set rd [redis_deferring_client]
$rd hello 3
$rd read ;# Discard the hello reply
# Test that the subscribe/psubscribe notification is ok
$rd client reply off
assert_equal {1} [subscribe $rd channel]
assert_equal {2} [psubscribe $rd ch*]
# Test that the publish notification is ok
$rd client reply off
assert_equal 2 [r publish channel hello]
assert_equal {message channel hello} [$rd read]
assert_equal {pmessage ch* channel hello} [$rd read]
# Test that the unsubscribe/punsubscribe notification is ok
$rd client reply off
assert_equal {1} [unsubscribe $rd channel]
assert_equal {0} [punsubscribe $rd ch*]
$rd close
} {0} {resp3}
2010-06-16 05:03:23 -04:00
test "PUNSUBSCRIBE from non-subscribed channels" {
set rd1 [redis_deferring_client]
assert_equal {0 0 0} [punsubscribe $rd1 {foo.* bar.* quux.*}]
# clean up clients
$rd1 close
}
test "NUMSUB returns numbers, not strings (#1561)" {
r pubsub numsub abc def
} {abc 0 def 0}
test "NUMPATs returns the number of unique patterns" {
set rd1 [redis_deferring_client]
set rd2 [redis_deferring_client]
# Three unique patterns and one that overlaps
psubscribe $rd1 "foo*"
psubscribe $rd2 "foo*"
psubscribe $rd1 "bar*"
psubscribe $rd2 "baz*"
set patterns [r pubsub numpat]
# clean up clients
punsubscribe $rd1
punsubscribe $rd2
assert_equal 3 $patterns
$rd1 close
$rd2 close
}
2010-06-16 05:03:23 -04:00
test "Mix SUBSCRIBE and PSUBSCRIBE" {
set rd1 [redis_deferring_client]
assert_equal {1} [subscribe $rd1 {foo.bar}]
assert_equal {2} [psubscribe $rd1 {foo.*}]
assert_equal 2 [r publish foo.bar hello]
assert_equal {message foo.bar hello} [$rd1 read]
assert_equal {pmessage foo.* foo.bar hello} [$rd1 read]
# clean up clients
$rd1 close
2010-06-15 16:40:21 -04:00
}
2013-01-28 07:04:23 -05:00
test "PUNSUBSCRIBE and UNSUBSCRIBE should always reply" {
# Make sure we are not subscribed to any channel at all.
r punsubscribe
r unsubscribe
# Now check if the commands still reply correctly.
set reply1 [r punsubscribe]
set reply2 [r unsubscribe]
concat $reply1 $reply2
} {punsubscribe {} 0 unsubscribe {} 0}
2013-01-28 07:04:23 -05:00
### Keyspace events notification tests
test "Keyspace notifications: we receive keyspace notifications" {
r config set notify-keyspace-events KA
set rd1 [redis_deferring_client]
$rd1 CLIENT REPLY OFF ;# Make sure it works even if replies are silenced
2013-01-28 07:04:23 -05:00
assert_equal {1} [psubscribe $rd1 *]
r set foo bar
Improve test suite to handle external servers better. (#9033) This commit revives the improves the ability to run the test suite against external servers, instead of launching and managing `redis-server` processes as part of the test fixture. This capability existed in the past, using the `--host` and `--port` options. However, it was quite limited and mostly useful when running a specific tests. Attempting to run larger chunks of the test suite experienced many issues: * Many tests depend on being able to start and control `redis-server` themselves, and there's no clear distinction between external server compatible and other tests. * Cluster mode is not supported (resulting with `CROSSSLOT` errors). This PR cleans up many things and makes it possible to run the entire test suite against an external server. It also provides more fine grained controls to handle cases where the external server supports a subset of the Redis commands, limited number of databases, cluster mode, etc. The tests directory now contains a `README.md` file that describes how this works. This commit also includes additional cleanups and fixes: * Tests can now be tagged. * Tag-based selection is now unified across `start_server`, `tags` and `test`. * More information is provided about skipped or ignored tests. * Repeated patterns in tests have been extracted to common procedures, both at a global level and on a per-test file basis. * Cleaned up some cases where test setup was based on a previous test executing (a major anti-pattern that repeats itself in many places). * Cleaned up some cases where test teardown was not part of a test (in the future we should have dedicated teardown code that executes even when tests fail). * Fixed some tests that were flaky running on external servers.
2021-06-09 08:13:24 -04:00
assert_equal "pmessage * __keyspace@${db}__:foo set" [$rd1 read]
2013-01-28 07:04:23 -05:00
$rd1 close
}
test "Keyspace notifications: we receive keyevent notifications" {
r config set notify-keyspace-events EA
set rd1 [redis_deferring_client]
$rd1 CLIENT REPLY SKIP ;# Make sure it works even if replies are silenced
2013-01-28 07:04:23 -05:00
assert_equal {1} [psubscribe $rd1 *]
r set foo bar
Improve test suite to handle external servers better. (#9033) This commit revives the improves the ability to run the test suite against external servers, instead of launching and managing `redis-server` processes as part of the test fixture. This capability existed in the past, using the `--host` and `--port` options. However, it was quite limited and mostly useful when running a specific tests. Attempting to run larger chunks of the test suite experienced many issues: * Many tests depend on being able to start and control `redis-server` themselves, and there's no clear distinction between external server compatible and other tests. * Cluster mode is not supported (resulting with `CROSSSLOT` errors). This PR cleans up many things and makes it possible to run the entire test suite against an external server. It also provides more fine grained controls to handle cases where the external server supports a subset of the Redis commands, limited number of databases, cluster mode, etc. The tests directory now contains a `README.md` file that describes how this works. This commit also includes additional cleanups and fixes: * Tests can now be tagged. * Tag-based selection is now unified across `start_server`, `tags` and `test`. * More information is provided about skipped or ignored tests. * Repeated patterns in tests have been extracted to common procedures, both at a global level and on a per-test file basis. * Cleaned up some cases where test setup was based on a previous test executing (a major anti-pattern that repeats itself in many places). * Cleaned up some cases where test teardown was not part of a test (in the future we should have dedicated teardown code that executes even when tests fail). * Fixed some tests that were flaky running on external servers.
2021-06-09 08:13:24 -04:00
assert_equal "pmessage * __keyevent@${db}__:set foo" [$rd1 read]
2013-01-28 07:04:23 -05:00
$rd1 close
}
test "Keyspace notifications: we can receive both kind of events" {
r config set notify-keyspace-events KEA
set rd1 [redis_deferring_client]
$rd1 CLIENT REPLY ON ;# Just coverage
assert_equal {OK} [$rd1 read]
2013-01-28 07:04:23 -05:00
assert_equal {1} [psubscribe $rd1 *]
r set foo bar
Improve test suite to handle external servers better. (#9033) This commit revives the improves the ability to run the test suite against external servers, instead of launching and managing `redis-server` processes as part of the test fixture. This capability existed in the past, using the `--host` and `--port` options. However, it was quite limited and mostly useful when running a specific tests. Attempting to run larger chunks of the test suite experienced many issues: * Many tests depend on being able to start and control `redis-server` themselves, and there's no clear distinction between external server compatible and other tests. * Cluster mode is not supported (resulting with `CROSSSLOT` errors). This PR cleans up many things and makes it possible to run the entire test suite against an external server. It also provides more fine grained controls to handle cases where the external server supports a subset of the Redis commands, limited number of databases, cluster mode, etc. The tests directory now contains a `README.md` file that describes how this works. This commit also includes additional cleanups and fixes: * Tests can now be tagged. * Tag-based selection is now unified across `start_server`, `tags` and `test`. * More information is provided about skipped or ignored tests. * Repeated patterns in tests have been extracted to common procedures, both at a global level and on a per-test file basis. * Cleaned up some cases where test setup was based on a previous test executing (a major anti-pattern that repeats itself in many places). * Cleaned up some cases where test teardown was not part of a test (in the future we should have dedicated teardown code that executes even when tests fail). * Fixed some tests that were flaky running on external servers.
2021-06-09 08:13:24 -04:00
assert_equal "pmessage * __keyspace@${db}__:foo set" [$rd1 read]
assert_equal "pmessage * __keyevent@${db}__:set foo" [$rd1 read]
2013-01-28 07:04:23 -05:00
$rd1 close
}
test "Keyspace notifications: we are able to mask events" {
r config set notify-keyspace-events KEl
r del mylist
set rd1 [redis_deferring_client]
assert_equal {1} [psubscribe $rd1 *]
r set foo bar
r lpush mylist a
# No notification for set, because only list commands are enabled.
Improve test suite to handle external servers better. (#9033) This commit revives the improves the ability to run the test suite against external servers, instead of launching and managing `redis-server` processes as part of the test fixture. This capability existed in the past, using the `--host` and `--port` options. However, it was quite limited and mostly useful when running a specific tests. Attempting to run larger chunks of the test suite experienced many issues: * Many tests depend on being able to start and control `redis-server` themselves, and there's no clear distinction between external server compatible and other tests. * Cluster mode is not supported (resulting with `CROSSSLOT` errors). This PR cleans up many things and makes it possible to run the entire test suite against an external server. It also provides more fine grained controls to handle cases where the external server supports a subset of the Redis commands, limited number of databases, cluster mode, etc. The tests directory now contains a `README.md` file that describes how this works. This commit also includes additional cleanups and fixes: * Tests can now be tagged. * Tag-based selection is now unified across `start_server`, `tags` and `test`. * More information is provided about skipped or ignored tests. * Repeated patterns in tests have been extracted to common procedures, both at a global level and on a per-test file basis. * Cleaned up some cases where test setup was based on a previous test executing (a major anti-pattern that repeats itself in many places). * Cleaned up some cases where test teardown was not part of a test (in the future we should have dedicated teardown code that executes even when tests fail). * Fixed some tests that were flaky running on external servers.
2021-06-09 08:13:24 -04:00
assert_equal "pmessage * __keyspace@${db}__:mylist lpush" [$rd1 read]
assert_equal "pmessage * __keyevent@${db}__:lpush mylist" [$rd1 read]
2013-01-28 07:04:23 -05:00
$rd1 close
}
test "Keyspace notifications: general events test" {
r config set notify-keyspace-events KEg
set rd1 [redis_deferring_client]
assert_equal {1} [psubscribe $rd1 *]
r set foo bar
r expire foo 1
r del foo
Improve test suite to handle external servers better. (#9033) This commit revives the improves the ability to run the test suite against external servers, instead of launching and managing `redis-server` processes as part of the test fixture. This capability existed in the past, using the `--host` and `--port` options. However, it was quite limited and mostly useful when running a specific tests. Attempting to run larger chunks of the test suite experienced many issues: * Many tests depend on being able to start and control `redis-server` themselves, and there's no clear distinction between external server compatible and other tests. * Cluster mode is not supported (resulting with `CROSSSLOT` errors). This PR cleans up many things and makes it possible to run the entire test suite against an external server. It also provides more fine grained controls to handle cases where the external server supports a subset of the Redis commands, limited number of databases, cluster mode, etc. The tests directory now contains a `README.md` file that describes how this works. This commit also includes additional cleanups and fixes: * Tests can now be tagged. * Tag-based selection is now unified across `start_server`, `tags` and `test`. * More information is provided about skipped or ignored tests. * Repeated patterns in tests have been extracted to common procedures, both at a global level and on a per-test file basis. * Cleaned up some cases where test setup was based on a previous test executing (a major anti-pattern that repeats itself in many places). * Cleaned up some cases where test teardown was not part of a test (in the future we should have dedicated teardown code that executes even when tests fail). * Fixed some tests that were flaky running on external servers.
2021-06-09 08:13:24 -04:00
assert_equal "pmessage * __keyspace@${db}__:foo expire" [$rd1 read]
assert_equal "pmessage * __keyevent@${db}__:expire foo" [$rd1 read]
assert_equal "pmessage * __keyspace@${db}__:foo del" [$rd1 read]
assert_equal "pmessage * __keyevent@${db}__:del foo" [$rd1 read]
2013-01-28 07:04:23 -05:00
$rd1 close
}
test "Keyspace notifications: list events test" {
r config set notify-keyspace-events KEl
r del mylist
set rd1 [redis_deferring_client]
assert_equal {1} [psubscribe $rd1 *]
r lpush mylist a
r rpush mylist a
r rpop mylist
Improve test suite to handle external servers better. (#9033) This commit revives the improves the ability to run the test suite against external servers, instead of launching and managing `redis-server` processes as part of the test fixture. This capability existed in the past, using the `--host` and `--port` options. However, it was quite limited and mostly useful when running a specific tests. Attempting to run larger chunks of the test suite experienced many issues: * Many tests depend on being able to start and control `redis-server` themselves, and there's no clear distinction between external server compatible and other tests. * Cluster mode is not supported (resulting with `CROSSSLOT` errors). This PR cleans up many things and makes it possible to run the entire test suite against an external server. It also provides more fine grained controls to handle cases where the external server supports a subset of the Redis commands, limited number of databases, cluster mode, etc. The tests directory now contains a `README.md` file that describes how this works. This commit also includes additional cleanups and fixes: * Tests can now be tagged. * Tag-based selection is now unified across `start_server`, `tags` and `test`. * More information is provided about skipped or ignored tests. * Repeated patterns in tests have been extracted to common procedures, both at a global level and on a per-test file basis. * Cleaned up some cases where test setup was based on a previous test executing (a major anti-pattern that repeats itself in many places). * Cleaned up some cases where test teardown was not part of a test (in the future we should have dedicated teardown code that executes even when tests fail). * Fixed some tests that were flaky running on external servers.
2021-06-09 08:13:24 -04:00
assert_equal "pmessage * __keyspace@${db}__:mylist lpush" [$rd1 read]
assert_equal "pmessage * __keyevent@${db}__:lpush mylist" [$rd1 read]
assert_equal "pmessage * __keyspace@${db}__:mylist rpush" [$rd1 read]
assert_equal "pmessage * __keyevent@${db}__:rpush mylist" [$rd1 read]
assert_equal "pmessage * __keyspace@${db}__:mylist rpop" [$rd1 read]
assert_equal "pmessage * __keyevent@${db}__:rpop mylist" [$rd1 read]
2013-01-28 07:04:23 -05:00
$rd1 close
}
test "Keyspace notifications: set events test" {
r config set notify-keyspace-events Ks
r del myset
set rd1 [redis_deferring_client]
assert_equal {1} [psubscribe $rd1 *]
r sadd myset a b c d
r srem myset x
r sadd myset x y z
r srem myset x
Improve test suite to handle external servers better. (#9033) This commit revives the improves the ability to run the test suite against external servers, instead of launching and managing `redis-server` processes as part of the test fixture. This capability existed in the past, using the `--host` and `--port` options. However, it was quite limited and mostly useful when running a specific tests. Attempting to run larger chunks of the test suite experienced many issues: * Many tests depend on being able to start and control `redis-server` themselves, and there's no clear distinction between external server compatible and other tests. * Cluster mode is not supported (resulting with `CROSSSLOT` errors). This PR cleans up many things and makes it possible to run the entire test suite against an external server. It also provides more fine grained controls to handle cases where the external server supports a subset of the Redis commands, limited number of databases, cluster mode, etc. The tests directory now contains a `README.md` file that describes how this works. This commit also includes additional cleanups and fixes: * Tests can now be tagged. * Tag-based selection is now unified across `start_server`, `tags` and `test`. * More information is provided about skipped or ignored tests. * Repeated patterns in tests have been extracted to common procedures, both at a global level and on a per-test file basis. * Cleaned up some cases where test setup was based on a previous test executing (a major anti-pattern that repeats itself in many places). * Cleaned up some cases where test teardown was not part of a test (in the future we should have dedicated teardown code that executes even when tests fail). * Fixed some tests that were flaky running on external servers.
2021-06-09 08:13:24 -04:00
assert_equal "pmessage * __keyspace@${db}__:myset sadd" [$rd1 read]
assert_equal "pmessage * __keyspace@${db}__:myset sadd" [$rd1 read]
assert_equal "pmessage * __keyspace@${db}__:myset srem" [$rd1 read]
2013-01-28 07:04:23 -05:00
$rd1 close
}
test "Keyspace notifications: zset events test" {
r config set notify-keyspace-events Kz
r del myzset
set rd1 [redis_deferring_client]
assert_equal {1} [psubscribe $rd1 *]
r zadd myzset 1 a 2 b
r zrem myzset x
r zadd myzset 3 x 4 y 5 z
r zrem myzset x
Improve test suite to handle external servers better. (#9033) This commit revives the improves the ability to run the test suite against external servers, instead of launching and managing `redis-server` processes as part of the test fixture. This capability existed in the past, using the `--host` and `--port` options. However, it was quite limited and mostly useful when running a specific tests. Attempting to run larger chunks of the test suite experienced many issues: * Many tests depend on being able to start and control `redis-server` themselves, and there's no clear distinction between external server compatible and other tests. * Cluster mode is not supported (resulting with `CROSSSLOT` errors). This PR cleans up many things and makes it possible to run the entire test suite against an external server. It also provides more fine grained controls to handle cases where the external server supports a subset of the Redis commands, limited number of databases, cluster mode, etc. The tests directory now contains a `README.md` file that describes how this works. This commit also includes additional cleanups and fixes: * Tests can now be tagged. * Tag-based selection is now unified across `start_server`, `tags` and `test`. * More information is provided about skipped or ignored tests. * Repeated patterns in tests have been extracted to common procedures, both at a global level and on a per-test file basis. * Cleaned up some cases where test setup was based on a previous test executing (a major anti-pattern that repeats itself in many places). * Cleaned up some cases where test teardown was not part of a test (in the future we should have dedicated teardown code that executes even when tests fail). * Fixed some tests that were flaky running on external servers.
2021-06-09 08:13:24 -04:00
assert_equal "pmessage * __keyspace@${db}__:myzset zadd" [$rd1 read]
assert_equal "pmessage * __keyspace@${db}__:myzset zadd" [$rd1 read]
assert_equal "pmessage * __keyspace@${db}__:myzset zrem" [$rd1 read]
2013-01-28 07:04:23 -05:00
$rd1 close
}
test "Keyspace notifications: hash events test" {
r config set notify-keyspace-events Kh
r del myhash
set rd1 [redis_deferring_client]
assert_equal {1} [psubscribe $rd1 *]
r hmset myhash yes 1 no 0
r hincrby myhash yes 10
Improve test suite to handle external servers better. (#9033) This commit revives the improves the ability to run the test suite against external servers, instead of launching and managing `redis-server` processes as part of the test fixture. This capability existed in the past, using the `--host` and `--port` options. However, it was quite limited and mostly useful when running a specific tests. Attempting to run larger chunks of the test suite experienced many issues: * Many tests depend on being able to start and control `redis-server` themselves, and there's no clear distinction between external server compatible and other tests. * Cluster mode is not supported (resulting with `CROSSSLOT` errors). This PR cleans up many things and makes it possible to run the entire test suite against an external server. It also provides more fine grained controls to handle cases where the external server supports a subset of the Redis commands, limited number of databases, cluster mode, etc. The tests directory now contains a `README.md` file that describes how this works. This commit also includes additional cleanups and fixes: * Tests can now be tagged. * Tag-based selection is now unified across `start_server`, `tags` and `test`. * More information is provided about skipped or ignored tests. * Repeated patterns in tests have been extracted to common procedures, both at a global level and on a per-test file basis. * Cleaned up some cases where test setup was based on a previous test executing (a major anti-pattern that repeats itself in many places). * Cleaned up some cases where test teardown was not part of a test (in the future we should have dedicated teardown code that executes even when tests fail). * Fixed some tests that were flaky running on external servers.
2021-06-09 08:13:24 -04:00
assert_equal "pmessage * __keyspace@${db}__:myhash hset" [$rd1 read]
assert_equal "pmessage * __keyspace@${db}__:myhash hincrby" [$rd1 read]
2013-01-28 07:04:23 -05:00
$rd1 close
}
test "Keyspace notifications: stream events test" {
r config set notify-keyspace-events Kt
r del mystream
set rd1 [redis_deferring_client]
assert_equal {1} [psubscribe $rd1 *]
r xgroup create mystream mygroup $ mkstream
r xgroup createconsumer mystream mygroup Bob
set id [r xadd mystream 1 field1 A]
r xreadgroup group mygroup Alice STREAMS mystream >
r xclaim mystream mygroup Mike 0 $id force
# Not notify because of "Lee" not exists.
r xgroup delconsumer mystream mygroup Lee
# Not notify because of "Bob" exists.
r xautoclaim mystream mygroup Bob 0 $id
r xgroup delconsumer mystream mygroup Bob
assert_equal "pmessage * __keyspace@${db}__:mystream xgroup-create" [$rd1 read]
assert_equal "pmessage * __keyspace@${db}__:mystream xgroup-createconsumer" [$rd1 read]
assert_equal "pmessage * __keyspace@${db}__:mystream xadd" [$rd1 read]
assert_equal "pmessage * __keyspace@${db}__:mystream xgroup-createconsumer" [$rd1 read]
assert_equal "pmessage * __keyspace@${db}__:mystream xgroup-createconsumer" [$rd1 read]
assert_equal "pmessage * __keyspace@${db}__:mystream xgroup-delconsumer" [$rd1 read]
$rd1 close
}
2013-01-28 07:04:23 -05:00
test "Keyspace notifications: expired events (triggered expire)" {
r config set notify-keyspace-events Ex
r del foo
set rd1 [redis_deferring_client]
assert_equal {1} [psubscribe $rd1 *]
r psetex foo 100 1
wait_for_condition 50 100 {
[r exists foo] == 0
} else {
fail "Key does not expire?!"
}
Improve test suite to handle external servers better. (#9033) This commit revives the improves the ability to run the test suite against external servers, instead of launching and managing `redis-server` processes as part of the test fixture. This capability existed in the past, using the `--host` and `--port` options. However, it was quite limited and mostly useful when running a specific tests. Attempting to run larger chunks of the test suite experienced many issues: * Many tests depend on being able to start and control `redis-server` themselves, and there's no clear distinction between external server compatible and other tests. * Cluster mode is not supported (resulting with `CROSSSLOT` errors). This PR cleans up many things and makes it possible to run the entire test suite against an external server. It also provides more fine grained controls to handle cases where the external server supports a subset of the Redis commands, limited number of databases, cluster mode, etc. The tests directory now contains a `README.md` file that describes how this works. This commit also includes additional cleanups and fixes: * Tests can now be tagged. * Tag-based selection is now unified across `start_server`, `tags` and `test`. * More information is provided about skipped or ignored tests. * Repeated patterns in tests have been extracted to common procedures, both at a global level and on a per-test file basis. * Cleaned up some cases where test setup was based on a previous test executing (a major anti-pattern that repeats itself in many places). * Cleaned up some cases where test teardown was not part of a test (in the future we should have dedicated teardown code that executes even when tests fail). * Fixed some tests that were flaky running on external servers.
2021-06-09 08:13:24 -04:00
assert_equal "pmessage * __keyevent@${db}__:expired foo" [$rd1 read]
2013-01-28 07:04:23 -05:00
$rd1 close
}
test "Keyspace notifications: expired events (background expire)" {
r config set notify-keyspace-events Ex
r del foo
set rd1 [redis_deferring_client]
assert_equal {1} [psubscribe $rd1 *]
r psetex foo 100 1
Improve test suite to handle external servers better. (#9033) This commit revives the improves the ability to run the test suite against external servers, instead of launching and managing `redis-server` processes as part of the test fixture. This capability existed in the past, using the `--host` and `--port` options. However, it was quite limited and mostly useful when running a specific tests. Attempting to run larger chunks of the test suite experienced many issues: * Many tests depend on being able to start and control `redis-server` themselves, and there's no clear distinction between external server compatible and other tests. * Cluster mode is not supported (resulting with `CROSSSLOT` errors). This PR cleans up many things and makes it possible to run the entire test suite against an external server. It also provides more fine grained controls to handle cases where the external server supports a subset of the Redis commands, limited number of databases, cluster mode, etc. The tests directory now contains a `README.md` file that describes how this works. This commit also includes additional cleanups and fixes: * Tests can now be tagged. * Tag-based selection is now unified across `start_server`, `tags` and `test`. * More information is provided about skipped or ignored tests. * Repeated patterns in tests have been extracted to common procedures, both at a global level and on a per-test file basis. * Cleaned up some cases where test setup was based on a previous test executing (a major anti-pattern that repeats itself in many places). * Cleaned up some cases where test teardown was not part of a test (in the future we should have dedicated teardown code that executes even when tests fail). * Fixed some tests that were flaky running on external servers.
2021-06-09 08:13:24 -04:00
assert_equal "pmessage * __keyevent@${db}__:expired foo" [$rd1 read]
2013-01-28 07:04:23 -05:00
$rd1 close
}
test "Keyspace notifications: evicted events" {
r config set notify-keyspace-events Ee
r config set maxmemory-policy allkeys-lru
r flushdb
set rd1 [redis_deferring_client]
assert_equal {1} [psubscribe $rd1 *]
r set foo bar
r config set maxmemory 1
Improve test suite to handle external servers better. (#9033) This commit revives the improves the ability to run the test suite against external servers, instead of launching and managing `redis-server` processes as part of the test fixture. This capability existed in the past, using the `--host` and `--port` options. However, it was quite limited and mostly useful when running a specific tests. Attempting to run larger chunks of the test suite experienced many issues: * Many tests depend on being able to start and control `redis-server` themselves, and there's no clear distinction between external server compatible and other tests. * Cluster mode is not supported (resulting with `CROSSSLOT` errors). This PR cleans up many things and makes it possible to run the entire test suite against an external server. It also provides more fine grained controls to handle cases where the external server supports a subset of the Redis commands, limited number of databases, cluster mode, etc. The tests directory now contains a `README.md` file that describes how this works. This commit also includes additional cleanups and fixes: * Tests can now be tagged. * Tag-based selection is now unified across `start_server`, `tags` and `test`. * More information is provided about skipped or ignored tests. * Repeated patterns in tests have been extracted to common procedures, both at a global level and on a per-test file basis. * Cleaned up some cases where test setup was based on a previous test executing (a major anti-pattern that repeats itself in many places). * Cleaned up some cases where test teardown was not part of a test (in the future we should have dedicated teardown code that executes even when tests fail). * Fixed some tests that were flaky running on external servers.
2021-06-09 08:13:24 -04:00
assert_equal "pmessage * __keyevent@${db}__:evicted foo" [$rd1 read]
2013-01-28 07:04:23 -05:00
r config set maxmemory 0
$rd1 close
Improve test suite to handle external servers better. (#9033) This commit revives the improves the ability to run the test suite against external servers, instead of launching and managing `redis-server` processes as part of the test fixture. This capability existed in the past, using the `--host` and `--port` options. However, it was quite limited and mostly useful when running a specific tests. Attempting to run larger chunks of the test suite experienced many issues: * Many tests depend on being able to start and control `redis-server` themselves, and there's no clear distinction between external server compatible and other tests. * Cluster mode is not supported (resulting with `CROSSSLOT` errors). This PR cleans up many things and makes it possible to run the entire test suite against an external server. It also provides more fine grained controls to handle cases where the external server supports a subset of the Redis commands, limited number of databases, cluster mode, etc. The tests directory now contains a `README.md` file that describes how this works. This commit also includes additional cleanups and fixes: * Tests can now be tagged. * Tag-based selection is now unified across `start_server`, `tags` and `test`. * More information is provided about skipped or ignored tests. * Repeated patterns in tests have been extracted to common procedures, both at a global level and on a per-test file basis. * Cleaned up some cases where test setup was based on a previous test executing (a major anti-pattern that repeats itself in many places). * Cleaned up some cases where test teardown was not part of a test (in the future we should have dedicated teardown code that executes even when tests fail). * Fixed some tests that were flaky running on external servers.
2021-06-09 08:13:24 -04:00
r config set maxmemory-policy noeviction
} {OK} {needs:config-maxmemory}
test "Keyspace notifications: test CONFIG GET/SET of event flags" {
r config set notify-keyspace-events gKE
assert_equal {gKE} [lindex [r config get notify-keyspace-events] 1]
r config set notify-keyspace-events {$lshzxeKE}
assert_equal {$lshzxeKE} [lindex [r config get notify-keyspace-events] 1]
r config set notify-keyspace-events KA
assert_equal {AK} [lindex [r config get notify-keyspace-events] 1]
r config set notify-keyspace-events EA
assert_equal {AE} [lindex [r config get notify-keyspace-events] 1]
}
test "Keyspace notifications: new key test" {
r config set notify-keyspace-events En
set rd1 [redis_deferring_client]
assert_equal {1} [psubscribe $rd1 *]
r set foo bar
# second set of foo should not cause a 'new' event
r set foo baz
r set bar bar
assert_equal "pmessage * __keyevent@${db}__:new foo" [$rd1 read]
assert_equal "pmessage * __keyevent@${db}__:new bar" [$rd1 read]
$rd1 close
}
test "publish to self inside multi" {
r hello 3
r subscribe foo
r multi
r ping abc
r publish foo bar
r publish foo vaz
r ping def
assert_equal [r exec] {abc 1 1 def}
assert_equal [r read] {message foo bar}
assert_equal [r read] {message foo vaz}
} {} {resp3}
test "publish to self inside script" {
r hello 3
r subscribe foo
set res [r eval {
redis.call("ping","abc")
redis.call("publish","foo","bar")
redis.call("publish","foo","vaz")
redis.call("ping","def")
return "bla"} 0]
assert_equal $res {bla}
assert_equal [r read] {message foo bar}
assert_equal [r read] {message foo vaz}
} {} {resp3}
test "unsubscribe inside multi, and publish to self" {
r hello 3
# Note: SUBSCRIBE and UNSUBSCRIBE with multiple channels in the same command,
# breaks the multi response, see https://github.com/redis/redis/issues/12207
# this is just a temporary sanity test to detect unintended breakage.
# subscribe for 3 channels actually emits 3 "responses"
assert_equal "subscribe foo 1" [r subscribe foo bar baz]
assert_equal "subscribe bar 2" [r read]
assert_equal "subscribe baz 3" [r read]
r multi
r ping abc
r unsubscribe bar
r unsubscribe baz
r ping def
assert_equal [r exec] {abc {unsubscribe bar 2} {unsubscribe baz 1} def}
# published message comes after the publish command's response.
assert_equal [r publish foo vaz] {1}
assert_equal [r read] {message foo vaz}
} {} {resp3}
}