mirror of
https://codeberg.org/redict/redict.git
synced 2025-01-22 16:18:28 -05:00
997fa41e99
The MacOS CI in github actions often hangs without any logs. GH argues that it's due to resource utilization, either running out of disk space, memory, or CPU starvation, and thus the runner is terminated. This PR contains multiple attempts to resolve this: 1. introducing pause_process instead of SIGSTOP, which waits for the process to stop before resuming the test, possibly resolving race conditions in some tests, this was a suspect since there was one test that could result in an infinite loop in that case, in practice this didn't help, but still a good idea to keep. 2. disable the `save` config in many tests that don't need it, specifically ones that use heavy writes and could create large files. 3. change the `populate` proc to use short pipeline rather than an infinite one. 4. use `--clients 1` in the macos CI so that we don't risk running multiple resource demanding tests in parallel. 5. enable `--verbose` to be repeated to elevate verbosity and print more info to stdout when a test or a server starts.
1457 lines
61 KiB
Tcl
1457 lines
61 KiB
Tcl
proc log_file_matches {log pattern} {
|
|
set fp [open $log r]
|
|
set content [read $fp]
|
|
close $fp
|
|
string match $pattern $content
|
|
}
|
|
|
|
start_server {tags {"repl network external:skip"}} {
|
|
set slave [srv 0 client]
|
|
set slave_host [srv 0 host]
|
|
set slave_port [srv 0 port]
|
|
set slave_log [srv 0 stdout]
|
|
start_server {} {
|
|
set master [srv 0 client]
|
|
set master_host [srv 0 host]
|
|
set master_port [srv 0 port]
|
|
|
|
# Configure the master in order to hang waiting for the BGSAVE
|
|
# operation, so that the slave remains in the handshake state.
|
|
$master config set repl-diskless-sync yes
|
|
$master config set repl-diskless-sync-delay 1000
|
|
|
|
# Start the replication process...
|
|
$slave slaveof $master_host $master_port
|
|
|
|
test {Slave enters handshake} {
|
|
wait_for_condition 50 1000 {
|
|
[string match *handshake* [$slave role]]
|
|
} else {
|
|
fail "Replica does not enter handshake state"
|
|
}
|
|
}
|
|
|
|
test {Slave enters wait_bgsave} {
|
|
wait_for_condition 50 1000 {
|
|
[string match *state=wait_bgsave* [$master info replication]]
|
|
} else {
|
|
fail "Replica does not enter wait_bgsave state"
|
|
}
|
|
}
|
|
|
|
# Use a short replication timeout on the slave, so that if there
|
|
# are no bugs the timeout is triggered in a reasonable amount
|
|
# of time.
|
|
$slave config set repl-timeout 5
|
|
|
|
# But make the master unable to send
|
|
# the periodic newlines to refresh the connection. The slave
|
|
# should detect the timeout.
|
|
$master debug sleep 10
|
|
|
|
test {Slave is able to detect timeout during handshake} {
|
|
wait_for_condition 50 1000 {
|
|
[log_file_matches $slave_log "*Timeout connecting to the MASTER*"]
|
|
} else {
|
|
fail "Replica is not able to detect timeout"
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
start_server {tags {"repl external:skip"}} {
|
|
set A [srv 0 client]
|
|
set A_host [srv 0 host]
|
|
set A_port [srv 0 port]
|
|
start_server {} {
|
|
set B [srv 0 client]
|
|
set B_host [srv 0 host]
|
|
set B_port [srv 0 port]
|
|
|
|
test {Set instance A as slave of B} {
|
|
$A slaveof $B_host $B_port
|
|
wait_for_condition 50 100 {
|
|
[lindex [$A role] 0] eq {slave} &&
|
|
[string match {*master_link_status:up*} [$A info replication]]
|
|
} else {
|
|
fail "Can't turn the instance into a replica"
|
|
}
|
|
}
|
|
|
|
test {INCRBYFLOAT replication, should not remove expire} {
|
|
r set test 1 EX 100
|
|
r incrbyfloat test 0.1
|
|
wait_for_ofs_sync $A $B
|
|
assert_equal [$A debug digest] [$B debug digest]
|
|
}
|
|
|
|
test {GETSET replication} {
|
|
$A config resetstat
|
|
$A config set loglevel debug
|
|
$B config set loglevel debug
|
|
r set test foo
|
|
assert_equal [r getset test bar] foo
|
|
wait_for_condition 500 10 {
|
|
[$A get test] eq "bar"
|
|
} else {
|
|
fail "getset wasn't propagated"
|
|
}
|
|
assert_equal [r set test vaz get] bar
|
|
wait_for_condition 500 10 {
|
|
[$A get test] eq "vaz"
|
|
} else {
|
|
fail "set get wasn't propagated"
|
|
}
|
|
assert_match {*calls=3,*} [cmdrstat set $A]
|
|
assert_match {} [cmdrstat getset $A]
|
|
}
|
|
|
|
test {BRPOPLPUSH replication, when blocking against empty list} {
|
|
$A config resetstat
|
|
set rd [redis_deferring_client]
|
|
$rd brpoplpush a b 5
|
|
r lpush a foo
|
|
wait_for_condition 50 100 {
|
|
[$A debug digest] eq [$B debug digest]
|
|
} else {
|
|
fail "Master and replica have different digest: [$A debug digest] VS [$B debug digest]"
|
|
}
|
|
assert_match {*calls=1,*} [cmdrstat rpoplpush $A]
|
|
assert_match {} [cmdrstat lmove $A]
|
|
}
|
|
|
|
test {BRPOPLPUSH replication, list exists} {
|
|
$A config resetstat
|
|
set rd [redis_deferring_client]
|
|
r lpush c 1
|
|
r lpush c 2
|
|
r lpush c 3
|
|
$rd brpoplpush c d 5
|
|
after 1000
|
|
assert_equal [$A debug digest] [$B debug digest]
|
|
assert_match {*calls=1,*} [cmdrstat rpoplpush $A]
|
|
assert_match {} [cmdrstat lmove $A]
|
|
}
|
|
|
|
foreach wherefrom {left right} {
|
|
foreach whereto {left right} {
|
|
test "BLMOVE ($wherefrom, $whereto) replication, when blocking against empty list" {
|
|
$A config resetstat
|
|
set rd [redis_deferring_client]
|
|
$rd blmove a b $wherefrom $whereto 5
|
|
r lpush a foo
|
|
wait_for_condition 50 100 {
|
|
[$A debug digest] eq [$B debug digest]
|
|
} else {
|
|
fail "Master and replica have different digest: [$A debug digest] VS [$B debug digest]"
|
|
}
|
|
assert_match {*calls=1,*} [cmdrstat lmove $A]
|
|
assert_match {} [cmdrstat rpoplpush $A]
|
|
}
|
|
|
|
test "BLMOVE ($wherefrom, $whereto) replication, list exists" {
|
|
$A config resetstat
|
|
set rd [redis_deferring_client]
|
|
r lpush c 1
|
|
r lpush c 2
|
|
r lpush c 3
|
|
$rd blmove c d $wherefrom $whereto 5
|
|
after 1000
|
|
assert_equal [$A debug digest] [$B debug digest]
|
|
assert_match {*calls=1,*} [cmdrstat lmove $A]
|
|
assert_match {} [cmdrstat rpoplpush $A]
|
|
}
|
|
}
|
|
}
|
|
|
|
test {BLPOP followed by role change, issue #2473} {
|
|
set rd [redis_deferring_client]
|
|
$rd blpop foo 0 ; # Block while B is a master
|
|
|
|
# Turn B into master of A
|
|
$A slaveof no one
|
|
$B slaveof $A_host $A_port
|
|
wait_for_condition 50 100 {
|
|
[lindex [$B role] 0] eq {slave} &&
|
|
[string match {*master_link_status:up*} [$B info replication]]
|
|
} else {
|
|
fail "Can't turn the instance into a replica"
|
|
}
|
|
|
|
# Push elements into the "foo" list of the new replica.
|
|
# If the client is still attached to the instance, we'll get
|
|
# a desync between the two instances.
|
|
$A rpush foo a b c
|
|
after 100
|
|
|
|
wait_for_condition 50 100 {
|
|
[$A debug digest] eq [$B debug digest] &&
|
|
[$A lrange foo 0 -1] eq {a b c} &&
|
|
[$B lrange foo 0 -1] eq {a b c}
|
|
} else {
|
|
fail "Master and replica have different digest: [$A debug digest] VS [$B debug digest]"
|
|
}
|
|
assert_match {*calls=1,*,rejected_calls=0,failed_calls=1*} [cmdrstat blpop $B]
|
|
}
|
|
}
|
|
}
|
|
|
|
start_server {tags {"repl external:skip"}} {
|
|
r set mykey foo
|
|
|
|
start_server {} {
|
|
test {Second server should have role master at first} {
|
|
s role
|
|
} {master}
|
|
|
|
test {SLAVEOF should start with link status "down"} {
|
|
r multi
|
|
r slaveof [srv -1 host] [srv -1 port]
|
|
r info replication
|
|
r exec
|
|
} {*master_link_status:down*}
|
|
|
|
test {The role should immediately be changed to "replica"} {
|
|
s role
|
|
} {slave}
|
|
|
|
wait_for_sync r
|
|
test {Sync should have transferred keys from master} {
|
|
r get mykey
|
|
} {foo}
|
|
|
|
test {The link status should be up} {
|
|
s master_link_status
|
|
} {up}
|
|
|
|
test {SET on the master should immediately propagate} {
|
|
r -1 set mykey bar
|
|
|
|
wait_for_condition 500 100 {
|
|
[r 0 get mykey] eq {bar}
|
|
} else {
|
|
fail "SET on master did not propagated on replica"
|
|
}
|
|
}
|
|
|
|
test {FLUSHDB / FLUSHALL should replicate} {
|
|
# we're attaching to a sub-replica, so we need to stop pings on the real master
|
|
r -1 config set repl-ping-replica-period 3600
|
|
|
|
set repl [attach_to_replication_stream]
|
|
|
|
r -1 set key value
|
|
r -1 flushdb
|
|
|
|
r -1 set key value2
|
|
r -1 flushall
|
|
|
|
wait_for_ofs_sync [srv 0 client] [srv -1 client]
|
|
assert_equal [r -1 dbsize] 0
|
|
assert_equal [r 0 dbsize] 0
|
|
|
|
# DB is empty.
|
|
r -1 flushdb
|
|
r -1 flushdb
|
|
r -1 eval {redis.call("flushdb")} 0
|
|
|
|
# DBs are empty.
|
|
r -1 flushall
|
|
r -1 flushall
|
|
r -1 eval {redis.call("flushall")} 0
|
|
|
|
# add another command to check nothing else was propagated after the above
|
|
r -1 incr x
|
|
|
|
# Assert that each FLUSHDB command is replicated even the DB is empty.
|
|
# Assert that each FLUSHALL command is replicated even the DBs are empty.
|
|
assert_replication_stream $repl {
|
|
{set key value}
|
|
{flushdb}
|
|
{set key value2}
|
|
{flushall}
|
|
{flushdb}
|
|
{flushdb}
|
|
{flushdb}
|
|
{flushall}
|
|
{flushall}
|
|
{flushall}
|
|
{incr x}
|
|
}
|
|
close_replication_stream $repl
|
|
}
|
|
|
|
test {ROLE in master reports master with a slave} {
|
|
set res [r -1 role]
|
|
lassign $res role offset slaves
|
|
assert {$role eq {master}}
|
|
assert {$offset > 0}
|
|
assert {[llength $slaves] == 1}
|
|
lassign [lindex $slaves 0] master_host master_port slave_offset
|
|
assert {$slave_offset <= $offset}
|
|
}
|
|
|
|
test {ROLE in slave reports slave in connected state} {
|
|
set res [r role]
|
|
lassign $res role master_host master_port slave_state slave_offset
|
|
assert {$role eq {slave}}
|
|
assert {$slave_state eq {connected}}
|
|
}
|
|
}
|
|
}
|
|
|
|
foreach mdl {no yes} {
|
|
foreach sdl {disabled swapdb} {
|
|
start_server {tags {"repl external:skip"} overrides {save {}}} {
|
|
set master [srv 0 client]
|
|
$master config set repl-diskless-sync $mdl
|
|
$master config set repl-diskless-sync-delay 5
|
|
$master config set repl-diskless-sync-max-replicas 3
|
|
set master_host [srv 0 host]
|
|
set master_port [srv 0 port]
|
|
set slaves {}
|
|
start_server {overrides {save {}}} {
|
|
lappend slaves [srv 0 client]
|
|
start_server {overrides {save {}}} {
|
|
lappend slaves [srv 0 client]
|
|
start_server {overrides {save {}}} {
|
|
lappend slaves [srv 0 client]
|
|
test "Connect multiple replicas at the same time (issue #141), master diskless=$mdl, replica diskless=$sdl" {
|
|
# start load handles only inside the test, so that the test can be skipped
|
|
set load_handle0 [start_bg_complex_data $master_host $master_port 9 100000000]
|
|
set load_handle1 [start_bg_complex_data $master_host $master_port 11 100000000]
|
|
set load_handle2 [start_bg_complex_data $master_host $master_port 12 100000000]
|
|
set load_handle3 [start_write_load $master_host $master_port 8]
|
|
set load_handle4 [start_write_load $master_host $master_port 4]
|
|
after 5000 ;# wait for some data to accumulate so that we have RDB part for the fork
|
|
|
|
# Send SLAVEOF commands to slaves
|
|
[lindex $slaves 0] config set repl-diskless-load $sdl
|
|
[lindex $slaves 1] config set repl-diskless-load $sdl
|
|
[lindex $slaves 2] config set repl-diskless-load $sdl
|
|
[lindex $slaves 0] slaveof $master_host $master_port
|
|
[lindex $slaves 1] slaveof $master_host $master_port
|
|
[lindex $slaves 2] slaveof $master_host $master_port
|
|
|
|
# Wait for all the three slaves to reach the "online"
|
|
# state from the POV of the master.
|
|
set retry 500
|
|
while {$retry} {
|
|
set info [r -3 info]
|
|
if {[string match {*slave0:*state=online*slave1:*state=online*slave2:*state=online*} $info]} {
|
|
break
|
|
} else {
|
|
incr retry -1
|
|
after 100
|
|
}
|
|
}
|
|
if {$retry == 0} {
|
|
error "assertion:Slaves not correctly synchronized"
|
|
}
|
|
|
|
# Wait that slaves acknowledge they are online so
|
|
# we are sure that DBSIZE and DEBUG DIGEST will not
|
|
# fail because of timing issues.
|
|
wait_for_condition 500 100 {
|
|
[lindex [[lindex $slaves 0] role] 3] eq {connected} &&
|
|
[lindex [[lindex $slaves 1] role] 3] eq {connected} &&
|
|
[lindex [[lindex $slaves 2] role] 3] eq {connected}
|
|
} else {
|
|
fail "Slaves still not connected after some time"
|
|
}
|
|
|
|
# Stop the write load
|
|
stop_bg_complex_data $load_handle0
|
|
stop_bg_complex_data $load_handle1
|
|
stop_bg_complex_data $load_handle2
|
|
stop_write_load $load_handle3
|
|
stop_write_load $load_handle4
|
|
|
|
# Make sure no more commands processed
|
|
wait_load_handlers_disconnected -3
|
|
|
|
wait_for_ofs_sync $master [lindex $slaves 0]
|
|
wait_for_ofs_sync $master [lindex $slaves 1]
|
|
wait_for_ofs_sync $master [lindex $slaves 2]
|
|
|
|
# Check digests
|
|
set digest [$master debug digest]
|
|
set digest0 [[lindex $slaves 0] debug digest]
|
|
set digest1 [[lindex $slaves 1] debug digest]
|
|
set digest2 [[lindex $slaves 2] debug digest]
|
|
assert {$digest ne 0000000000000000000000000000000000000000}
|
|
assert {$digest eq $digest0}
|
|
assert {$digest eq $digest1}
|
|
assert {$digest eq $digest2}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
start_server {tags {"repl external:skip"} overrides {save {}}} {
|
|
set master [srv 0 client]
|
|
set master_host [srv 0 host]
|
|
set master_port [srv 0 port]
|
|
start_server {overrides {save {}}} {
|
|
test "Master stream is correctly processed while the replica has a script in -BUSY state" {
|
|
set load_handle0 [start_write_load $master_host $master_port 3]
|
|
set slave [srv 0 client]
|
|
$slave config set lua-time-limit 500
|
|
$slave slaveof $master_host $master_port
|
|
|
|
# Wait for the slave to be online
|
|
wait_for_condition 500 100 {
|
|
[lindex [$slave role] 3] eq {connected}
|
|
} else {
|
|
fail "Replica still not connected after some time"
|
|
}
|
|
|
|
# Wait some time to make sure the master is sending data
|
|
# to the slave.
|
|
after 5000
|
|
|
|
# Stop the ability of the slave to process data by sendig
|
|
# a script that will put it in BUSY state.
|
|
$slave eval {for i=1,3000000000 do end} 0
|
|
|
|
# Wait some time again so that more master stream will
|
|
# be processed.
|
|
after 2000
|
|
|
|
# Stop the write load
|
|
stop_write_load $load_handle0
|
|
|
|
# number of keys
|
|
wait_for_condition 500 100 {
|
|
[$master debug digest] eq [$slave debug digest]
|
|
} else {
|
|
fail "Different datasets between replica and master"
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
# Diskless load swapdb when NOT async_loading (different master replid)
|
|
foreach testType {Successful Aborted} {
|
|
start_server {tags {"repl external:skip"}} {
|
|
set replica [srv 0 client]
|
|
set replica_host [srv 0 host]
|
|
set replica_port [srv 0 port]
|
|
set replica_log [srv 0 stdout]
|
|
start_server {} {
|
|
set master [srv 0 client]
|
|
set master_host [srv 0 host]
|
|
set master_port [srv 0 port]
|
|
|
|
# Set master and replica to use diskless replication on swapdb mode
|
|
$master config set repl-diskless-sync yes
|
|
$master config set repl-diskless-sync-delay 0
|
|
$master config set save ""
|
|
$replica config set repl-diskless-load swapdb
|
|
$replica config set save ""
|
|
|
|
# Put different data sets on the master and replica
|
|
# We need to put large keys on the master since the replica replies to info only once in 2mb
|
|
$replica debug populate 200 slave 10
|
|
$master debug populate 1000 master 100000
|
|
$master config set rdbcompression no
|
|
|
|
# Set a key value on replica to check status on failure and after swapping db
|
|
$replica set mykey myvalue
|
|
|
|
switch $testType {
|
|
"Aborted" {
|
|
# Set master with a slow rdb generation, so that we can easily intercept loading
|
|
# 10ms per key, with 1000 keys is 10 seconds
|
|
$master config set rdb-key-save-delay 10000
|
|
|
|
# Start the replication process
|
|
$replica replicaof $master_host $master_port
|
|
|
|
test {Diskless load swapdb (different replid): replica enter loading} {
|
|
# Wait for the replica to start reading the rdb
|
|
wait_for_condition 100 100 {
|
|
[s -1 loading] eq 1
|
|
} else {
|
|
fail "Replica didn't get into loading mode"
|
|
}
|
|
|
|
assert_equal [s -1 async_loading] 0
|
|
}
|
|
|
|
# Make sure that next sync will not start immediately so that we can catch the replica in between syncs
|
|
$master config set repl-diskless-sync-delay 5
|
|
|
|
# Kill the replica connection on the master
|
|
set killed [$master client kill type replica]
|
|
|
|
# Wait for loading to stop (fail)
|
|
wait_for_condition 100 100 {
|
|
[s -1 loading] eq 0
|
|
} else {
|
|
fail "Replica didn't disconnect"
|
|
}
|
|
|
|
test {Diskless load swapdb (different replid): old database is exposed after replication fails} {
|
|
# Ensure we see old values from replica
|
|
assert_equal [$replica get mykey] "myvalue"
|
|
|
|
# Make sure amount of replica keys didn't change
|
|
assert_equal [$replica dbsize] 201
|
|
}
|
|
|
|
# Speed up shutdown
|
|
$master config set rdb-key-save-delay 0
|
|
}
|
|
"Successful" {
|
|
# Start the replication process
|
|
$replica replicaof $master_host $master_port
|
|
|
|
# Let replica finish sync with master
|
|
wait_for_condition 100 100 {
|
|
[s -1 master_link_status] eq "up"
|
|
} else {
|
|
fail "Master <-> Replica didn't finish sync"
|
|
}
|
|
|
|
test {Diskless load swapdb (different replid): new database is exposed after swapping} {
|
|
# Ensure we don't see anymore the key that was stored only to replica and also that we don't get LOADING status
|
|
assert_equal [$replica GET mykey] ""
|
|
|
|
# Make sure amount of keys matches master
|
|
assert_equal [$replica dbsize] 1000
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
# Diskless load swapdb when async_loading (matching master replid)
|
|
foreach testType {Successful Aborted} {
|
|
start_server {tags {"repl external:skip"}} {
|
|
set replica [srv 0 client]
|
|
set replica_host [srv 0 host]
|
|
set replica_port [srv 0 port]
|
|
set replica_log [srv 0 stdout]
|
|
start_server {} {
|
|
set master [srv 0 client]
|
|
set master_host [srv 0 host]
|
|
set master_port [srv 0 port]
|
|
|
|
# Set master and replica to use diskless replication on swapdb mode
|
|
$master config set repl-diskless-sync yes
|
|
$master config set repl-diskless-sync-delay 0
|
|
$master config set save ""
|
|
$replica config set repl-diskless-load swapdb
|
|
$replica config set save ""
|
|
|
|
# Set replica writable so we can check that a key we manually added is served
|
|
# during replication and after failure, but disappears on success
|
|
$replica config set replica-read-only no
|
|
|
|
# Initial sync to have matching replids between master and replica
|
|
$replica replicaof $master_host $master_port
|
|
|
|
# Let replica finish initial sync with master
|
|
wait_for_condition 100 100 {
|
|
[s -1 master_link_status] eq "up"
|
|
} else {
|
|
fail "Master <-> Replica didn't finish sync"
|
|
}
|
|
|
|
# Put different data sets on the master and replica
|
|
# We need to put large keys on the master since the replica replies to info only once in 2mb
|
|
$replica debug populate 2000 slave 10
|
|
$master debug populate 2000 master 100000
|
|
$master config set rdbcompression no
|
|
|
|
# Set a key value on replica to check status during loading, on failure and after swapping db
|
|
$replica set mykey myvalue
|
|
|
|
# Set a function value on replica to check status during loading, on failure and after swapping db
|
|
$replica function load {#!lua name=test
|
|
redis.register_function('test', function() return 'hello1' end)
|
|
}
|
|
|
|
# Set a function value on master to check it reaches the replica when replication ends
|
|
$master function load {#!lua name=test
|
|
redis.register_function('test', function() return 'hello2' end)
|
|
}
|
|
|
|
# Remember the sync_full stat before the client kill.
|
|
set sync_full [s 0 sync_full]
|
|
|
|
if {$testType == "Aborted"} {
|
|
# Set master with a slow rdb generation, so that we can easily intercept loading
|
|
# 10ms per key, with 2000 keys is 20 seconds
|
|
$master config set rdb-key-save-delay 10000
|
|
}
|
|
|
|
# Force the replica to try another full sync (this time it will have matching master replid)
|
|
$master multi
|
|
$master client kill type replica
|
|
# Fill replication backlog with new content
|
|
$master config set repl-backlog-size 16384
|
|
for {set keyid 0} {$keyid < 10} {incr keyid} {
|
|
$master set "$keyid string_$keyid" [string repeat A 16384]
|
|
}
|
|
$master exec
|
|
|
|
# Wait for sync_full to get incremented from the previous value.
|
|
# After the client kill, make sure we do a reconnect, and do a FULL SYNC.
|
|
wait_for_condition 100 100 {
|
|
[s 0 sync_full] > $sync_full
|
|
} else {
|
|
fail "Master <-> Replica didn't start the full sync"
|
|
}
|
|
|
|
switch $testType {
|
|
"Aborted" {
|
|
test {Diskless load swapdb (async_loading): replica enter async_loading} {
|
|
# Wait for the replica to start reading the rdb
|
|
wait_for_condition 100 100 {
|
|
[s -1 async_loading] eq 1
|
|
} else {
|
|
fail "Replica didn't get into async_loading mode"
|
|
}
|
|
|
|
assert_equal [s -1 loading] 0
|
|
}
|
|
|
|
test {Diskless load swapdb (async_loading): old database is exposed while async replication is in progress} {
|
|
# Ensure we still see old values while async_loading is in progress and also not LOADING status
|
|
assert_equal [$replica get mykey] "myvalue"
|
|
|
|
# Ensure we still can call old function while async_loading is in progress
|
|
assert_equal [$replica fcall test 0] "hello1"
|
|
|
|
# Make sure we're still async_loading to validate previous assertion
|
|
assert_equal [s -1 async_loading] 1
|
|
|
|
# Make sure amount of replica keys didn't change
|
|
assert_equal [$replica dbsize] 2001
|
|
}
|
|
|
|
test {Busy script during async loading} {
|
|
set rd_replica [redis_deferring_client -1]
|
|
$replica config set lua-time-limit 10
|
|
$rd_replica eval {while true do end} 0
|
|
after 200
|
|
assert_error {BUSY*} {$replica ping}
|
|
$replica script kill
|
|
after 200 ; # Give some time to Lua to call the hook again...
|
|
assert_equal [$replica ping] "PONG"
|
|
$rd_replica close
|
|
}
|
|
|
|
test {Blocked commands and configs during async-loading} {
|
|
assert_error {LOADING*} {$replica config set appendonly no}
|
|
assert_error {LOADING*} {$replica REPLICAOF no one}
|
|
}
|
|
|
|
# Make sure that next sync will not start immediately so that we can catch the replica in between syncs
|
|
$master config set repl-diskless-sync-delay 5
|
|
|
|
# Kill the replica connection on the master
|
|
set killed [$master client kill type replica]
|
|
|
|
# Wait for loading to stop (fail)
|
|
wait_for_condition 100 100 {
|
|
[s -1 async_loading] eq 0
|
|
} else {
|
|
fail "Replica didn't disconnect"
|
|
}
|
|
|
|
test {Diskless load swapdb (async_loading): old database is exposed after async replication fails} {
|
|
# Ensure we see old values from replica
|
|
assert_equal [$replica get mykey] "myvalue"
|
|
|
|
# Ensure we still can call old function
|
|
assert_equal [$replica fcall test 0] "hello1"
|
|
|
|
# Make sure amount of replica keys didn't change
|
|
assert_equal [$replica dbsize] 2001
|
|
}
|
|
|
|
# Speed up shutdown
|
|
$master config set rdb-key-save-delay 0
|
|
}
|
|
"Successful" {
|
|
# Let replica finish sync with master
|
|
wait_for_condition 100 100 {
|
|
[s -1 master_link_status] eq "up"
|
|
} else {
|
|
fail "Master <-> Replica didn't finish sync"
|
|
}
|
|
|
|
test {Diskless load swapdb (async_loading): new database is exposed after swapping} {
|
|
# Ensure we don't see anymore the key that was stored only to replica and also that we don't get LOADING status
|
|
assert_equal [$replica GET mykey] ""
|
|
|
|
# Ensure we got the new function
|
|
assert_equal [$replica fcall test 0] "hello2"
|
|
|
|
# Make sure amount of keys matches master
|
|
assert_equal [$replica dbsize] 2010
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
test {diskless loading short read} {
|
|
start_server {tags {"repl"} overrides {save ""}} {
|
|
set replica [srv 0 client]
|
|
set replica_host [srv 0 host]
|
|
set replica_port [srv 0 port]
|
|
start_server {overrides {save ""}} {
|
|
set master [srv 0 client]
|
|
set master_host [srv 0 host]
|
|
set master_port [srv 0 port]
|
|
|
|
# Set master and replica to use diskless replication
|
|
$master config set repl-diskless-sync yes
|
|
$master config set rdbcompression no
|
|
$replica config set repl-diskless-load swapdb
|
|
$master config set hz 500
|
|
$replica config set hz 500
|
|
$master config set dynamic-hz no
|
|
$replica config set dynamic-hz no
|
|
# Try to fill the master with all types of data types / encodings
|
|
set start [clock clicks -milliseconds]
|
|
|
|
# Set a function value to check short read handling on functions
|
|
r function load {#!lua name=test
|
|
redis.register_function('test', function() return 'hello1' end)
|
|
}
|
|
|
|
for {set k 0} {$k < 3} {incr k} {
|
|
for {set i 0} {$i < 10} {incr i} {
|
|
r set "$k int_$i" [expr {int(rand()*10000)}]
|
|
r expire "$k int_$i" [expr {int(rand()*10000)}]
|
|
r set "$k string_$i" [string repeat A [expr {int(rand()*1000000)}]]
|
|
r hset "$k hash_small" [string repeat A [expr {int(rand()*10)}]] 0[string repeat A [expr {int(rand()*10)}]]
|
|
r hset "$k hash_large" [string repeat A [expr {int(rand()*10000)}]] [string repeat A [expr {int(rand()*1000000)}]]
|
|
r sadd "$k set_small" [string repeat A [expr {int(rand()*10)}]]
|
|
r sadd "$k set_large" [string repeat A [expr {int(rand()*1000000)}]]
|
|
r zadd "$k zset_small" [expr {rand()}] [string repeat A [expr {int(rand()*10)}]]
|
|
r zadd "$k zset_large" [expr {rand()}] [string repeat A [expr {int(rand()*1000000)}]]
|
|
r lpush "$k list_small" [string repeat A [expr {int(rand()*10)}]]
|
|
r lpush "$k list_large" [string repeat A [expr {int(rand()*1000000)}]]
|
|
for {set j 0} {$j < 10} {incr j} {
|
|
r xadd "$k stream" * foo "asdf" bar "1234"
|
|
}
|
|
r xgroup create "$k stream" "mygroup_$i" 0
|
|
r xreadgroup GROUP "mygroup_$i" Alice COUNT 1 STREAMS "$k stream" >
|
|
}
|
|
}
|
|
|
|
if {$::verbose} {
|
|
set end [clock clicks -milliseconds]
|
|
set duration [expr $end - $start]
|
|
puts "filling took $duration ms (TODO: use pipeline)"
|
|
set start [clock clicks -milliseconds]
|
|
}
|
|
|
|
# Start the replication process...
|
|
set loglines [count_log_lines -1]
|
|
$master config set repl-diskless-sync-delay 0
|
|
$replica replicaof $master_host $master_port
|
|
|
|
# kill the replication at various points
|
|
set attempts 100
|
|
if {$::accurate} { set attempts 500 }
|
|
for {set i 0} {$i < $attempts} {incr i} {
|
|
# wait for the replica to start reading the rdb
|
|
# using the log file since the replica only responds to INFO once in 2mb
|
|
set res [wait_for_log_messages -1 {"*Loading DB in memory*"} $loglines 2000 1]
|
|
set loglines [lindex $res 1]
|
|
|
|
# add some additional random sleep so that we kill the master on a different place each time
|
|
after [expr {int(rand()*50)}]
|
|
|
|
# kill the replica connection on the master
|
|
set killed [$master client kill type replica]
|
|
|
|
set res [wait_for_log_messages -1 {"*Internal error in RDB*" "*Finished with success*" "*Successful partial resynchronization*"} $loglines 500 10]
|
|
if {$::verbose} { puts $res }
|
|
set log_text [lindex $res 0]
|
|
set loglines [lindex $res 1]
|
|
if {![string match "*Internal error in RDB*" $log_text]} {
|
|
# force the replica to try another full sync
|
|
$master multi
|
|
$master client kill type replica
|
|
$master set asdf asdf
|
|
# fill replication backlog with new content
|
|
$master config set repl-backlog-size 16384
|
|
for {set keyid 0} {$keyid < 10} {incr keyid} {
|
|
$master set "$keyid string_$keyid" [string repeat A 16384]
|
|
}
|
|
$master exec
|
|
}
|
|
|
|
# wait for loading to stop (fail)
|
|
# After a loading successfully, next loop will enter `async_loading`
|
|
wait_for_condition 1000 1 {
|
|
[s -1 async_loading] eq 0 &&
|
|
[s -1 loading] eq 0
|
|
} else {
|
|
fail "Replica didn't disconnect"
|
|
}
|
|
}
|
|
if {$::verbose} {
|
|
set end [clock clicks -milliseconds]
|
|
set duration [expr $end - $start]
|
|
puts "test took $duration ms"
|
|
}
|
|
# enable fast shutdown
|
|
$master config set rdb-key-save-delay 0
|
|
}
|
|
}
|
|
} {} {external:skip}
|
|
|
|
# get current stime and utime metrics for a thread (since it's creation)
|
|
proc get_cpu_metrics { statfile } {
|
|
if { [ catch {
|
|
set fid [ open $statfile r ]
|
|
set data [ read $fid 1024 ]
|
|
::close $fid
|
|
set data [ split $data ]
|
|
|
|
;## number of jiffies it has been scheduled...
|
|
set utime [ lindex $data 13 ]
|
|
set stime [ lindex $data 14 ]
|
|
} err ] } {
|
|
error "assertion:can't parse /proc: $err"
|
|
}
|
|
set mstime [clock milliseconds]
|
|
return [ list $mstime $utime $stime ]
|
|
}
|
|
|
|
# compute %utime and %stime of a thread between two measurements
|
|
proc compute_cpu_usage {start end} {
|
|
set clock_ticks [exec getconf CLK_TCK]
|
|
# convert ms time to jiffies and calc delta
|
|
set dtime [ expr { ([lindex $end 0] - [lindex $start 0]) * double($clock_ticks) / 1000 } ]
|
|
set utime [ expr { [lindex $end 1] - [lindex $start 1] } ]
|
|
set stime [ expr { [lindex $end 2] - [lindex $start 2] } ]
|
|
set pucpu [ expr { ($utime / $dtime) * 100 } ]
|
|
set pscpu [ expr { ($stime / $dtime) * 100 } ]
|
|
return [ list $pucpu $pscpu ]
|
|
}
|
|
|
|
|
|
# test diskless rdb pipe with multiple replicas, which may drop half way
|
|
start_server {tags {"repl external:skip"} overrides {save ""}} {
|
|
set master [srv 0 client]
|
|
$master config set repl-diskless-sync yes
|
|
$master config set repl-diskless-sync-delay 5
|
|
$master config set repl-diskless-sync-max-replicas 2
|
|
set master_host [srv 0 host]
|
|
set master_port [srv 0 port]
|
|
set master_pid [srv 0 pid]
|
|
# put enough data in the db that the rdb file will be bigger than the socket buffers
|
|
# and since we'll have key-load-delay of 100, 20000 keys will take at least 2 seconds
|
|
# we also need the replica to process requests during transfer (which it does only once in 2mb)
|
|
$master debug populate 20000 test 10000
|
|
$master config set rdbcompression no
|
|
# If running on Linux, we also measure utime/stime to detect possible I/O handling issues
|
|
set os [catch {exec uname}]
|
|
set measure_time [expr {$os == "Linux"} ? 1 : 0]
|
|
foreach all_drop {no slow fast all timeout} {
|
|
test "diskless $all_drop replicas drop during rdb pipe" {
|
|
set replicas {}
|
|
set replicas_alive {}
|
|
# start one replica that will read the rdb fast, and one that will be slow
|
|
start_server {overrides {save ""}} {
|
|
lappend replicas [srv 0 client]
|
|
lappend replicas_alive [srv 0 client]
|
|
start_server {overrides {save ""}} {
|
|
lappend replicas [srv 0 client]
|
|
lappend replicas_alive [srv 0 client]
|
|
|
|
# start replication
|
|
# it's enough for just one replica to be slow, and have it's write handler enabled
|
|
# so that the whole rdb generation process is bound to that
|
|
set loglines [count_log_lines -2]
|
|
[lindex $replicas 0] config set repl-diskless-load swapdb
|
|
[lindex $replicas 0] config set key-load-delay 100 ;# 20k keys and 100 microseconds sleep means at least 2 seconds
|
|
[lindex $replicas 0] replicaof $master_host $master_port
|
|
[lindex $replicas 1] replicaof $master_host $master_port
|
|
|
|
# wait for the replicas to start reading the rdb
|
|
# using the log file since the replica only responds to INFO once in 2mb
|
|
wait_for_log_messages -1 {"*Loading DB in memory*"} 0 1500 10
|
|
|
|
if {$measure_time} {
|
|
set master_statfile "/proc/$master_pid/stat"
|
|
set master_start_metrics [get_cpu_metrics $master_statfile]
|
|
set start_time [clock seconds]
|
|
}
|
|
|
|
# wait a while so that the pipe socket writer will be
|
|
# blocked on write (since replica 0 is slow to read from the socket)
|
|
after 500
|
|
|
|
# add some command to be present in the command stream after the rdb.
|
|
$master incr $all_drop
|
|
|
|
# disconnect replicas depending on the current test
|
|
if {$all_drop == "all" || $all_drop == "fast"} {
|
|
exec kill [srv 0 pid]
|
|
set replicas_alive [lreplace $replicas_alive 1 1]
|
|
}
|
|
if {$all_drop == "all" || $all_drop == "slow"} {
|
|
exec kill [srv -1 pid]
|
|
set replicas_alive [lreplace $replicas_alive 0 0]
|
|
}
|
|
if {$all_drop == "timeout"} {
|
|
$master config set repl-timeout 2
|
|
# we want the slow replica to hang on a key for very long so it'll reach repl-timeout
|
|
pause_process [srv -1 pid]
|
|
after 2000
|
|
}
|
|
|
|
# wait for rdb child to exit
|
|
wait_for_condition 500 100 {
|
|
[s -2 rdb_bgsave_in_progress] == 0
|
|
} else {
|
|
fail "rdb child didn't terminate"
|
|
}
|
|
|
|
# make sure we got what we were aiming for, by looking for the message in the log file
|
|
if {$all_drop == "all"} {
|
|
wait_for_log_messages -2 {"*Diskless rdb transfer, last replica dropped, killing fork child*"} $loglines 1 1
|
|
}
|
|
if {$all_drop == "no"} {
|
|
wait_for_log_messages -2 {"*Diskless rdb transfer, done reading from pipe, 2 replicas still up*"} $loglines 1 1
|
|
}
|
|
if {$all_drop == "slow" || $all_drop == "fast"} {
|
|
wait_for_log_messages -2 {"*Diskless rdb transfer, done reading from pipe, 1 replicas still up*"} $loglines 1 1
|
|
}
|
|
if {$all_drop == "timeout"} {
|
|
wait_for_log_messages -2 {"*Disconnecting timedout replica (full sync)*"} $loglines 1 1
|
|
wait_for_log_messages -2 {"*Diskless rdb transfer, done reading from pipe, 1 replicas still up*"} $loglines 1 1
|
|
# master disconnected the slow replica, remove from array
|
|
set replicas_alive [lreplace $replicas_alive 0 0]
|
|
# release it
|
|
resume_process [srv -1 pid]
|
|
}
|
|
|
|
# make sure we don't have a busy loop going thought epoll_wait
|
|
if {$measure_time} {
|
|
set master_end_metrics [get_cpu_metrics $master_statfile]
|
|
set time_elapsed [expr {[clock seconds]-$start_time}]
|
|
set master_cpu [compute_cpu_usage $master_start_metrics $master_end_metrics]
|
|
set master_utime [lindex $master_cpu 0]
|
|
set master_stime [lindex $master_cpu 1]
|
|
if {$::verbose} {
|
|
puts "elapsed: $time_elapsed"
|
|
puts "master utime: $master_utime"
|
|
puts "master stime: $master_stime"
|
|
}
|
|
if {!$::no_latency && ($all_drop == "all" || $all_drop == "slow" || $all_drop == "timeout")} {
|
|
assert {$master_utime < 70}
|
|
assert {$master_stime < 70}
|
|
}
|
|
if {!$::no_latency && ($all_drop == "none" || $all_drop == "fast")} {
|
|
assert {$master_utime < 15}
|
|
assert {$master_stime < 15}
|
|
}
|
|
}
|
|
|
|
# verify the data integrity
|
|
foreach replica $replicas_alive {
|
|
# Wait that replicas acknowledge they are online so
|
|
# we are sure that DBSIZE and DEBUG DIGEST will not
|
|
# fail because of timing issues.
|
|
wait_for_condition 150 100 {
|
|
[lindex [$replica role] 3] eq {connected}
|
|
} else {
|
|
fail "replicas still not connected after some time"
|
|
}
|
|
|
|
# Make sure that replicas and master have same
|
|
# number of keys
|
|
wait_for_condition 50 100 {
|
|
[$master dbsize] == [$replica dbsize]
|
|
} else {
|
|
fail "Different number of keys between master and replicas after too long time."
|
|
}
|
|
|
|
# Check digests
|
|
set digest [$master debug digest]
|
|
set digest0 [$replica debug digest]
|
|
assert {$digest ne 0000000000000000000000000000000000000000}
|
|
assert {$digest eq $digest0}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
test "diskless replication child being killed is collected" {
|
|
# when diskless master is waiting for the replica to become writable
|
|
# it removes the read event from the rdb pipe so if the child gets killed
|
|
# the replica will hung. and the master may not collect the pid with waitpid
|
|
start_server {tags {"repl"} overrides {save ""}} {
|
|
set master [srv 0 client]
|
|
set master_host [srv 0 host]
|
|
set master_port [srv 0 port]
|
|
set master_pid [srv 0 pid]
|
|
$master config set repl-diskless-sync yes
|
|
$master config set repl-diskless-sync-delay 0
|
|
# put enough data in the db that the rdb file will be bigger than the socket buffers
|
|
$master debug populate 20000 test 10000
|
|
$master config set rdbcompression no
|
|
start_server {overrides {save ""}} {
|
|
set replica [srv 0 client]
|
|
set loglines [count_log_lines 0]
|
|
$replica config set repl-diskless-load swapdb
|
|
$replica config set key-load-delay 1000000
|
|
$replica config set loading-process-events-interval-bytes 1024
|
|
$replica replicaof $master_host $master_port
|
|
|
|
# wait for the replicas to start reading the rdb
|
|
wait_for_log_messages 0 {"*Loading DB in memory*"} $loglines 1500 10
|
|
|
|
# wait to be sure the replica is hung and the master is blocked on write
|
|
after 500
|
|
|
|
# simulate the OOM killer or anyone else kills the child
|
|
set fork_child_pid [get_child_pid -1]
|
|
exec kill -9 $fork_child_pid
|
|
|
|
# wait for the parent to notice the child have exited
|
|
wait_for_condition 50 100 {
|
|
[s -1 rdb_bgsave_in_progress] == 0
|
|
} else {
|
|
fail "rdb child didn't terminate"
|
|
}
|
|
|
|
# Speed up shutdown
|
|
$replica config set key-load-delay 0
|
|
}
|
|
}
|
|
} {} {external:skip}
|
|
|
|
foreach mdl {yes no} {
|
|
test "replication child dies when parent is killed - diskless: $mdl" {
|
|
# when master is killed, make sure the fork child can detect that and exit
|
|
start_server {tags {"repl"} overrides {save ""}} {
|
|
set master [srv 0 client]
|
|
set master_host [srv 0 host]
|
|
set master_port [srv 0 port]
|
|
set master_pid [srv 0 pid]
|
|
$master config set repl-diskless-sync $mdl
|
|
$master config set repl-diskless-sync-delay 0
|
|
# create keys that will take 10 seconds to save
|
|
$master config set rdb-key-save-delay 1000
|
|
$master debug populate 10000
|
|
start_server {overrides {save ""}} {
|
|
set replica [srv 0 client]
|
|
$replica replicaof $master_host $master_port
|
|
|
|
# wait for rdb child to start
|
|
wait_for_condition 5000 10 {
|
|
[s -1 rdb_bgsave_in_progress] == 1
|
|
} else {
|
|
fail "rdb child didn't start"
|
|
}
|
|
set fork_child_pid [get_child_pid -1]
|
|
|
|
# simulate the OOM killer or anyone else kills the parent
|
|
exec kill -9 $master_pid
|
|
|
|
# wait for the child to notice the parent died have exited
|
|
wait_for_condition 500 10 {
|
|
[process_is_alive $fork_child_pid] == 0
|
|
} else {
|
|
fail "rdb child didn't terminate"
|
|
}
|
|
}
|
|
}
|
|
} {} {external:skip}
|
|
}
|
|
|
|
test "diskless replication read pipe cleanup" {
|
|
# In diskless replication, we create a read pipe for the RDB, between the child and the parent.
|
|
# When we close this pipe (fd), the read handler also needs to be removed from the event loop (if it still registered).
|
|
# Otherwise, next time we will use the same fd, the registration will be fail (panic), because
|
|
# we will use EPOLL_CTL_MOD (the fd still register in the event loop), on fd that already removed from epoll_ctl
|
|
start_server {tags {"repl"} overrides {save ""}} {
|
|
set master [srv 0 client]
|
|
set master_host [srv 0 host]
|
|
set master_port [srv 0 port]
|
|
set master_pid [srv 0 pid]
|
|
$master config set repl-diskless-sync yes
|
|
$master config set repl-diskless-sync-delay 0
|
|
|
|
# put enough data in the db, and slowdown the save, to keep the parent busy at the read process
|
|
$master config set rdb-key-save-delay 100000
|
|
$master debug populate 20000 test 10000
|
|
$master config set rdbcompression no
|
|
start_server {overrides {save ""}} {
|
|
set replica [srv 0 client]
|
|
set loglines [count_log_lines 0]
|
|
$replica config set repl-diskless-load swapdb
|
|
$replica replicaof $master_host $master_port
|
|
|
|
# wait for the replicas to start reading the rdb
|
|
wait_for_log_messages 0 {"*Loading DB in memory*"} $loglines 1500 10
|
|
|
|
set loglines [count_log_lines -1]
|
|
# send FLUSHALL so the RDB child will be killed
|
|
$master flushall
|
|
|
|
# wait for another RDB child process to be started
|
|
wait_for_log_messages -1 {"*Background RDB transfer started by pid*"} $loglines 800 10
|
|
|
|
# make sure master is alive
|
|
$master ping
|
|
}
|
|
}
|
|
} {} {external:skip}
|
|
|
|
test {replicaof right after disconnection} {
|
|
# this is a rare race condition that was reproduced sporadically by the psync2 unit.
|
|
# see details in #7205
|
|
start_server {tags {"repl"} overrides {save ""}} {
|
|
set replica1 [srv 0 client]
|
|
set replica1_host [srv 0 host]
|
|
set replica1_port [srv 0 port]
|
|
set replica1_log [srv 0 stdout]
|
|
start_server {overrides {save ""}} {
|
|
set replica2 [srv 0 client]
|
|
set replica2_host [srv 0 host]
|
|
set replica2_port [srv 0 port]
|
|
set replica2_log [srv 0 stdout]
|
|
start_server {overrides {save ""}} {
|
|
set master [srv 0 client]
|
|
set master_host [srv 0 host]
|
|
set master_port [srv 0 port]
|
|
$replica1 replicaof $master_host $master_port
|
|
$replica2 replicaof $master_host $master_port
|
|
|
|
wait_for_condition 50 100 {
|
|
[string match {*master_link_status:up*} [$replica1 info replication]] &&
|
|
[string match {*master_link_status:up*} [$replica2 info replication]]
|
|
} else {
|
|
fail "Can't turn the instance into a replica"
|
|
}
|
|
|
|
set rd [redis_deferring_client -1]
|
|
$rd debug sleep 1
|
|
after 100
|
|
|
|
# when replica2 will wake up from the sleep it will find both disconnection
|
|
# from it's master and also a replicaof command at the same event loop
|
|
$master client kill type replica
|
|
$replica2 replicaof $replica1_host $replica1_port
|
|
$rd read
|
|
|
|
wait_for_condition 50 100 {
|
|
[string match {*master_link_status:up*} [$replica2 info replication]]
|
|
} else {
|
|
fail "role change failed."
|
|
}
|
|
|
|
# make sure psync succeeded, and there were no unexpected full syncs.
|
|
assert_equal [status $master sync_full] 2
|
|
assert_equal [status $replica1 sync_full] 0
|
|
assert_equal [status $replica2 sync_full] 0
|
|
}
|
|
}
|
|
}
|
|
} {} {external:skip}
|
|
|
|
test {Kill rdb child process if its dumping RDB is not useful} {
|
|
start_server {tags {"repl"}} {
|
|
set slave1 [srv 0 client]
|
|
start_server {} {
|
|
set slave2 [srv 0 client]
|
|
start_server {} {
|
|
set master [srv 0 client]
|
|
set master_host [srv 0 host]
|
|
set master_port [srv 0 port]
|
|
for {set i 0} {$i < 10} {incr i} {
|
|
$master set $i $i
|
|
}
|
|
# Generating RDB will cost 10s(10 * 1s)
|
|
$master config set rdb-key-save-delay 1000000
|
|
$master config set repl-diskless-sync no
|
|
$master config set save ""
|
|
|
|
$slave1 slaveof $master_host $master_port
|
|
$slave2 slaveof $master_host $master_port
|
|
|
|
# Wait for starting child
|
|
wait_for_condition 50 100 {
|
|
([s 0 rdb_bgsave_in_progress] == 1) &&
|
|
([string match "*wait_bgsave*" [s 0 slave0]]) &&
|
|
([string match "*wait_bgsave*" [s 0 slave1]])
|
|
} else {
|
|
fail "rdb child didn't start"
|
|
}
|
|
|
|
# Slave1 disconnect with master
|
|
$slave1 slaveof no one
|
|
# Shouldn't kill child since another slave wait for rdb
|
|
after 100
|
|
assert {[s 0 rdb_bgsave_in_progress] == 1}
|
|
|
|
# Slave2 disconnect with master
|
|
$slave2 slaveof no one
|
|
# Should kill child
|
|
wait_for_condition 100 10 {
|
|
[s 0 rdb_bgsave_in_progress] eq 0
|
|
} else {
|
|
fail "can't kill rdb child"
|
|
}
|
|
|
|
# If have save parameters, won't kill child
|
|
$master config set save "900 1"
|
|
$slave1 slaveof $master_host $master_port
|
|
$slave2 slaveof $master_host $master_port
|
|
wait_for_condition 50 100 {
|
|
([s 0 rdb_bgsave_in_progress] == 1) &&
|
|
([string match "*wait_bgsave*" [s 0 slave0]]) &&
|
|
([string match "*wait_bgsave*" [s 0 slave1]])
|
|
} else {
|
|
fail "rdb child didn't start"
|
|
}
|
|
$slave1 slaveof no one
|
|
$slave2 slaveof no one
|
|
after 200
|
|
assert {[s 0 rdb_bgsave_in_progress] == 1}
|
|
catch {$master shutdown nosave}
|
|
}
|
|
}
|
|
}
|
|
} {} {external:skip}
|
|
|
|
start_server {tags {"repl external:skip"}} {
|
|
set master1_host [srv 0 host]
|
|
set master1_port [srv 0 port]
|
|
r set a b
|
|
|
|
start_server {} {
|
|
set master2 [srv 0 client]
|
|
set master2_host [srv 0 host]
|
|
set master2_port [srv 0 port]
|
|
# Take 10s for dumping RDB
|
|
$master2 debug populate 10 master2 10
|
|
$master2 config set rdb-key-save-delay 1000000
|
|
|
|
start_server {} {
|
|
set sub_replica [srv 0 client]
|
|
|
|
start_server {} {
|
|
# Full sync with master1
|
|
r slaveof $master1_host $master1_port
|
|
wait_for_sync r
|
|
assert_equal "b" [r get a]
|
|
|
|
# Let sub replicas sync with me
|
|
$sub_replica slaveof [srv 0 host] [srv 0 port]
|
|
wait_for_sync $sub_replica
|
|
assert_equal "b" [$sub_replica get a]
|
|
|
|
# Full sync with master2, and then kill master2 before finishing dumping RDB
|
|
r slaveof $master2_host $master2_port
|
|
wait_for_condition 50 100 {
|
|
([s -2 rdb_bgsave_in_progress] == 1) &&
|
|
([string match "*wait_bgsave*" [s -2 slave0]])
|
|
} else {
|
|
fail "full sync didn't start"
|
|
}
|
|
catch {$master2 shutdown nosave}
|
|
|
|
test {Don't disconnect with replicas before loading transferred RDB when full sync} {
|
|
assert ![log_file_matches [srv -1 stdout] "*Connection with master lost*"]
|
|
# The replication id is not changed in entire replication chain
|
|
assert_equal [s master_replid] [s -3 master_replid]
|
|
assert_equal [s master_replid] [s -1 master_replid]
|
|
}
|
|
|
|
test {Discard cache master before loading transferred RDB when full sync} {
|
|
set full_sync [s -3 sync_full]
|
|
set partial_sync [s -3 sync_partial_ok]
|
|
# Partial sync with master1
|
|
r slaveof $master1_host $master1_port
|
|
wait_for_sync r
|
|
# master1 accepts partial sync instead of full sync
|
|
assert_equal $full_sync [s -3 sync_full]
|
|
assert_equal [expr $partial_sync+1] [s -3 sync_partial_ok]
|
|
|
|
# Since master only partially sync replica, and repl id is not changed,
|
|
# the replica doesn't disconnect with its sub-replicas
|
|
assert_equal [s master_replid] [s -3 master_replid]
|
|
assert_equal [s master_replid] [s -1 master_replid]
|
|
assert ![log_file_matches [srv -1 stdout] "*Connection with master lost*"]
|
|
# Sub replica just has one full sync, no partial resync.
|
|
assert_equal 1 [s sync_full]
|
|
assert_equal 0 [s sync_partial_ok]
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
test {replica can handle EINTR if use diskless load} {
|
|
start_server {tags {"repl"}} {
|
|
set replica [srv 0 client]
|
|
set replica_log [srv 0 stdout]
|
|
start_server {} {
|
|
set master [srv 0 client]
|
|
set master_host [srv 0 host]
|
|
set master_port [srv 0 port]
|
|
|
|
$master debug populate 100 master 100000
|
|
$master config set rdbcompression no
|
|
$master config set repl-diskless-sync yes
|
|
$master config set repl-diskless-sync-delay 0
|
|
$replica config set repl-diskless-load on-empty-db
|
|
# Construct EINTR error by using the built in watchdog
|
|
$replica config set watchdog-period 200
|
|
# Block replica in read()
|
|
$master config set rdb-key-save-delay 10000
|
|
# set speedy shutdown
|
|
$master config set save ""
|
|
# Start the replication process...
|
|
$replica replicaof $master_host $master_port
|
|
|
|
# Wait for the replica to start reading the rdb
|
|
set res [wait_for_log_messages -1 {"*Loading DB in memory*"} 0 200 10]
|
|
set loglines [lindex $res 1]
|
|
|
|
# Wait till we see the watchgod log line AFTER the loading started
|
|
wait_for_log_messages -1 {"*WATCHDOG TIMER EXPIRED*"} $loglines 200 10
|
|
|
|
# Make sure we're still loading, and that there was just one full sync attempt
|
|
assert ![log_file_matches [srv -1 stdout] "*Reconnecting to MASTER*"]
|
|
assert_equal 1 [s 0 sync_full]
|
|
assert_equal 1 [s -1 loading]
|
|
}
|
|
}
|
|
} {} {external:skip}
|
|
|
|
start_server {tags {"repl" "external:skip"}} {
|
|
test "replica do not write the reply to the replication link - SYNC (_addReplyToBufferOrList)" {
|
|
set rd [redis_deferring_client]
|
|
set lines [count_log_lines 0]
|
|
|
|
$rd sync
|
|
$rd ping
|
|
catch {$rd read} e
|
|
if {$::verbose} { puts "SYNC _addReplyToBufferOrList: $e" }
|
|
assert_equal "PONG" [r ping]
|
|
|
|
# Check we got the warning logs about the PING command.
|
|
verify_log_message 0 "*Replica generated a reply to command 'ping', disconnecting it: *" $lines
|
|
|
|
$rd close
|
|
waitForBgsave r
|
|
}
|
|
|
|
test "replica do not write the reply to the replication link - SYNC (addReplyDeferredLen)" {
|
|
set rd [redis_deferring_client]
|
|
set lines [count_log_lines 0]
|
|
|
|
$rd sync
|
|
$rd xinfo help
|
|
catch {$rd read} e
|
|
if {$::verbose} { puts "SYNC addReplyDeferredLen: $e" }
|
|
assert_equal "PONG" [r ping]
|
|
|
|
# Check we got the warning logs about the XINFO HELP command.
|
|
verify_log_message 0 "*Replica generated a reply to command 'xinfo|help', disconnecting it: *" $lines
|
|
|
|
$rd close
|
|
waitForBgsave r
|
|
}
|
|
|
|
test "replica do not write the reply to the replication link - PSYNC (_addReplyToBufferOrList)" {
|
|
set rd [redis_deferring_client]
|
|
set lines [count_log_lines 0]
|
|
|
|
$rd psync replicationid -1
|
|
assert_match {FULLRESYNC * 0} [$rd read]
|
|
$rd get foo
|
|
catch {$rd read} e
|
|
if {$::verbose} { puts "PSYNC _addReplyToBufferOrList: $e" }
|
|
assert_equal "PONG" [r ping]
|
|
|
|
# Check we got the warning logs about the GET command.
|
|
verify_log_message 0 "*Replica generated a reply to command 'get', disconnecting it: *" $lines
|
|
verify_log_message 0 "*== CRITICAL == This master is sending an error to its replica: *" $lines
|
|
verify_log_message 0 "*Replica can't interact with the keyspace*" $lines
|
|
|
|
$rd close
|
|
waitForBgsave r
|
|
}
|
|
|
|
test "replica do not write the reply to the replication link - PSYNC (addReplyDeferredLen)" {
|
|
set rd [redis_deferring_client]
|
|
set lines [count_log_lines 0]
|
|
|
|
$rd psync replicationid -1
|
|
assert_match {FULLRESYNC * 0} [$rd read]
|
|
$rd slowlog get
|
|
catch {$rd read} e
|
|
if {$::verbose} { puts "PSYNC addReplyDeferredLen: $e" }
|
|
assert_equal "PONG" [r ping]
|
|
|
|
# Check we got the warning logs about the SLOWLOG GET command.
|
|
verify_log_message 0 "*Replica generated a reply to command 'slowlog|get', disconnecting it: *" $lines
|
|
|
|
$rd close
|
|
waitForBgsave r
|
|
}
|
|
|
|
test "PSYNC with wrong offset should throw error" {
|
|
# It used to accept the FULL SYNC, but also replied with an error.
|
|
assert_error {ERR value is not an integer or out of range} {r psync replicationid offset_str}
|
|
set logs [exec tail -n 100 < [srv 0 stdout]]
|
|
assert_match {*Replica * asks for synchronization but with a wrong offset} $logs
|
|
assert_equal "PONG" [r ping]
|
|
}
|
|
}
|
|
|
|
start_server {tags {"repl external:skip"}} {
|
|
set master [srv 0 client]
|
|
set master_host [srv 0 host]
|
|
set master_port [srv 0 port]
|
|
$master debug SET-ACTIVE-EXPIRE 0
|
|
start_server {} {
|
|
set slave [srv 0 client]
|
|
$slave debug SET-ACTIVE-EXPIRE 0
|
|
$slave slaveof $master_host $master_port
|
|
|
|
test "Test replication with lazy expire" {
|
|
# wait for replication to be in sync
|
|
wait_for_condition 50 100 {
|
|
[lindex [$slave role] 0] eq {slave} &&
|
|
[string match {*master_link_status:up*} [$slave info replication]]
|
|
} else {
|
|
fail "Can't turn the instance into a replica"
|
|
}
|
|
|
|
$master sadd s foo
|
|
$master pexpire s 1
|
|
after 10
|
|
$master sadd s foo
|
|
assert_equal 1 [$master wait 1 0]
|
|
|
|
assert_equal "set" [$master type s]
|
|
assert_equal "set" [$slave type s]
|
|
}
|
|
}
|
|
}
|