caleb-brown/redict
1
0
Fork 0
mirror of https://codeberg.org/redict/redict.git synced 2025-01-22 16:18:28 -05:00
Code Issues Actions Packages Projects Releases Wiki Activity
b01802415d
redict/src/server.h
Binbin e04d41d78d
Prevent lua error_reply abuse from causing errorstats to become larger (#13141) 
Users who abuse lua error_reply will generate a new error object on each
error call, which can make server.errors get bigger and bigger. This
will
cause the server to block when calling INFO (we also return errorstats
by
default).

To prevent the damage it can cause, when a misuse is detected, we will
print a warning log and disable the errorstats to avoid adding more new
errors. It can be re-enabled via CONFIG RESETSTAT.

Because server.errors may be very large (it may be better now since we
have the limit), config resetstat may block for a while. So in
resetErrorTableStats, we will try to lazyfree server.errors.

See the related discussion at the end of #8217.
2024-03-19 08:18:22 +02:00

3795 lines
181 KiB
C
Raw Blame History

/*
* Copyright (c) 2009-2012, Salvatore Sanfilippo <antirez at gmail dot com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* * Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Redis nor the names of its contributors may be used
* to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __REDIS_H
#define __REDIS_H
#include "fmacros.h"
#include "config.h"
#include "solarisfixes.h"
#include "rio.h"
#include "atomicvar.h"
#include "commands.h"
#include <stdio.h>
#include <stdlib.h>
#include <stddef.h>
#include <string.h>
#include <time.h>
#include <limits.h>
#include <unistd.h>
#include <errno.h>
#include <inttypes.h>
#include <pthread.h>
#include <syslog.h>
#include <netinet/in.h>
#include <sys/socket.h>
#include <lua.h>
#include <signal.h>
#ifdef HAVE_LIBSYSTEMD
#include <systemd/sd-daemon.h>
#endif
#ifndef static_assert
#define static_assert(expr, lit) extern char __static_assert_failure[(expr) ? 1:-1]
#endif
typedef long long mstime_t; /* millisecond time type. */
typedef long long ustime_t; /* microsecond time type. */
#include "ae.h" /* Event driven programming library */
#include "sds.h" /* Dynamic safe strings */
#include "dict.h" /* Hash tables */
#include "kvstore.h" /* Slot-based hash table */
#include "adlist.h" /* Linked lists */
#include "zmalloc.h" /* total memory usage aware version of malloc/free */
#include "anet.h" /* Networking the easy way */
#include "version.h" /* Version macro */
#include "util.h" /* Misc functions useful in many places */
#include "latency.h" /* Latency monitor API */
#include "sparkline.h" /* ASCII graphs API */
#include "quicklist.h" /* Lists are encoded as linked lists of
N-elements flat arrays */
#include "rax.h" /* Radix tree */
#include "connection.h" /* Connection abstraction */
#define REDISMODULE_CORE 1
typedef struct redisObject robj;
#include "redismodule.h" /* Redis modules API defines. */
/* Following includes allow test functions to be called from Redis main() */
#include "zipmap.h"
#include "ziplist.h" /* Compact list data structure */
#include "sha1.h"
#include "endianconv.h"
#include "crc64.h"
struct hdr_histogram;
/* helpers */
#define numElements(x) (sizeof(x)/sizeof((x)[0]))
/* min/max */
#undef min
#undef max
#define min(a, b) ((a) < (b) ? (a) : (b))
#define max(a, b) ((a) > (b) ? (a) : (b))
/* Get the pointer of the outer struct from a member address */
#define redis_member2struct(struct_name, member_name, member_addr) \
((struct_name *)((char*)member_addr - offsetof(struct_name, member_name)))
/* Error codes */
#define C_OK 0
#define C_ERR -1
/* Static server configuration */
#define CONFIG_DEFAULT_HZ 10 /* Time interrupt calls/sec. */
#define CONFIG_MIN_HZ 1
#define CONFIG_MAX_HZ 500
#define MAX_CLIENTS_PER_CLOCK_TICK 200 /* HZ is adapted based on that. */
#define CRON_DBS_PER_CALL 16
#define CRON_DICTS_PER_DB 16
#define NET_MAX_WRITES_PER_EVENT (1024*64)
#define PROTO_SHARED_SELECT_CMDS 10
#define OBJ_SHARED_INTEGERS 10000
#define OBJ_SHARED_BULKHDR_LEN 32
#define OBJ_SHARED_HDR_STRLEN(_len_) (((_len_) < 10) ? 4 : 5) /* see shared.mbulkhdr etc. */
#define LOG_MAX_LEN 1024 /* Default maximum length of syslog messages.*/
#define AOF_REWRITE_ITEMS_PER_CMD 64
#define AOF_ANNOTATION_LINE_MAX_LEN 1024
#define CONFIG_RUN_ID_SIZE 40
#define RDB_EOF_MARK_SIZE 40
#define CONFIG_REPL_BACKLOG_MIN_SIZE (1024*16) /* 16k */
#define CONFIG_BGSAVE_RETRY_DELAY 5 /* Wait a few secs before trying again. */
#define CONFIG_DEFAULT_PID_FILE "/var/run/redis.pid"
#define CONFIG_DEFAULT_BINDADDR_COUNT 2
#define CONFIG_DEFAULT_BINDADDR { "*", "-::*" }
#define NET_HOST_STR_LEN 256 /* Longest valid hostname */
#define NET_IP_STR_LEN 46 /* INET6_ADDRSTRLEN is 46, but we need to be sure */
#define NET_ADDR_STR_LEN (NET_IP_STR_LEN+32) /* Must be enough for ip:port */
#define NET_HOST_PORT_STR_LEN (NET_HOST_STR_LEN+32) /* Must be enough for hostname:port */
#define CONFIG_BINDADDR_MAX 16
#define CONFIG_MIN_RESERVED_FDS 32
#define CONFIG_DEFAULT_PROC_TITLE_TEMPLATE "{title} {listen-addr} {server-mode}"
#define INCREMENTAL_REHASHING_THRESHOLD_US 1000
/* Bucket sizes for client eviction pools. Each bucket stores clients with
* memory usage of up to twice the size of the bucket below it. */
#define CLIENT_MEM_USAGE_BUCKET_MIN_LOG 15 /* Bucket sizes start at up to 32KB (2^15) */
#define CLIENT_MEM_USAGE_BUCKET_MAX_LOG 33 /* Bucket for largest clients: sizes above 4GB (2^32) */
#define CLIENT_MEM_USAGE_BUCKETS (1+CLIENT_MEM_USAGE_BUCKET_MAX_LOG-CLIENT_MEM_USAGE_BUCKET_MIN_LOG)
#define ACTIVE_EXPIRE_CYCLE_SLOW 0
#define ACTIVE_EXPIRE_CYCLE_FAST 1
/* Children process will exit with this status code to signal that the
* process terminated without an error: this is useful in order to kill
* a saving child (RDB or AOF one), without triggering in the parent the
* write protection that is normally turned on on write errors.
* Usually children that are terminated with SIGUSR1 will exit with this
* special code. */
#define SERVER_CHILD_NOERROR_RETVAL 255
/* Reading copy-on-write info is sometimes expensive and may slow down child
* processes that report it continuously. We measure the cost of obtaining it
* and hold back additional reading based on this factor. */
#define CHILD_COW_DUTY_CYCLE 100
/* Instantaneous metrics tracking. */
#define STATS_METRIC_SAMPLES 16 /* Number of samples per metric. */
#define STATS_METRIC_COMMAND 0 /* Number of commands executed. */
#define STATS_METRIC_NET_INPUT 1 /* Bytes read to network. */
#define STATS_METRIC_NET_OUTPUT 2 /* Bytes written to network. */
#define STATS_METRIC_NET_INPUT_REPLICATION 3 /* Bytes read to network during replication. */
#define STATS_METRIC_NET_OUTPUT_REPLICATION 4 /* Bytes written to network during replication. */
#define STATS_METRIC_EL_CYCLE 5 /* Number of eventloop cycled. */
#define STATS_METRIC_EL_DURATION 6 /* Eventloop duration. */
#define STATS_METRIC_COUNT 7
/* Protocol and I/O related defines */
#define PROTO_IOBUF_LEN (1024*16) /* Generic I/O buffer size */
#define PROTO_REPLY_CHUNK_BYTES (16*1024) /* 16k output buffer */
#define PROTO_INLINE_MAX_SIZE (1024*64) /* Max size of inline reads */
#define PROTO_MBULK_BIG_ARG (1024*32)
#define PROTO_RESIZE_THRESHOLD (1024*32) /* Threshold for determining whether to resize query buffer */
#define PROTO_REPLY_MIN_BYTES (1024) /* the lower limit on reply buffer size */
#define REDIS_AUTOSYNC_BYTES (1024*1024*4) /* Sync file every 4MB. */
#define REPLY_BUFFER_DEFAULT_PEAK_RESET_TIME 5000 /* 5 seconds */
/* When configuring the server eventloop, we setup it so that the total number
* of file descriptors we can handle are server.maxclients + RESERVED_FDS +
* a few more to stay safe. Since RESERVED_FDS defaults to 32, we add 96
* in order to make sure of not over provisioning more than 128 fds. */
#define CONFIG_FDSET_INCR (CONFIG_MIN_RESERVED_FDS+96)
/* OOM Score Adjustment classes. */
#define CONFIG_OOM_MASTER 0
#define CONFIG_OOM_REPLICA 1
#define CONFIG_OOM_BGCHILD 2
#define CONFIG_OOM_COUNT 3
extern int configOOMScoreAdjValuesDefaults[CONFIG_OOM_COUNT];
/* Hash table parameters */
#define HASHTABLE_MAX_LOAD_FACTOR 1.618 /* Maximum hash table load factor. */
/* Command flags. Please check the definition of struct redisCommand in this file
* for more information about the meaning of every flag. */
#define CMD_WRITE (1ULL<<0)
#define CMD_READONLY (1ULL<<1)
#define CMD_DENYOOM (1ULL<<2)
#define CMD_MODULE (1ULL<<3) /* Command exported by module. */
#define CMD_ADMIN (1ULL<<4)
#define CMD_PUBSUB (1ULL<<5)
#define CMD_NOSCRIPT (1ULL<<6)
#define CMD_BLOCKING (1ULL<<8) /* Has potential to block. */
#define CMD_LOADING (1ULL<<9)
#define CMD_STALE (1ULL<<10)
#define CMD_SKIP_MONITOR (1ULL<<11)
#define CMD_SKIP_SLOWLOG (1ULL<<12)
#define CMD_ASKING (1ULL<<13)
#define CMD_FAST (1ULL<<14)
#define CMD_NO_AUTH (1ULL<<15)
#define CMD_MAY_REPLICATE (1ULL<<16)
#define CMD_SENTINEL (1ULL<<17)
#define CMD_ONLY_SENTINEL (1ULL<<18)
#define CMD_NO_MANDATORY_KEYS (1ULL<<19)
#define CMD_PROTECTED (1ULL<<20)
#define CMD_MODULE_GETKEYS (1ULL<<21) /* Use the modules getkeys interface. */
#define CMD_MODULE_NO_CLUSTER (1ULL<<22) /* Deny on Redis Cluster. */
#define CMD_NO_ASYNC_LOADING (1ULL<<23)
#define CMD_NO_MULTI (1ULL<<24)
#define CMD_MOVABLE_KEYS (1ULL<<25) /* The legacy range spec doesn't cover all keys.
* Populated by populateCommandLegacyRangeSpec. */
#define CMD_ALLOW_BUSY ((1ULL<<26))
#define CMD_MODULE_GETCHANNELS (1ULL<<27) /* Use the modules getchannels interface. */
#define CMD_TOUCHES_ARBITRARY_KEYS (1ULL<<28)
/* Command flags that describe ACLs categories. */
#define ACL_CATEGORY_KEYSPACE (1ULL<<0)
#define ACL_CATEGORY_READ (1ULL<<1)
#define ACL_CATEGORY_WRITE (1ULL<<2)
#define ACL_CATEGORY_SET (1ULL<<3)
#define ACL_CATEGORY_SORTEDSET (1ULL<<4)
#define ACL_CATEGORY_LIST (1ULL<<5)
#define ACL_CATEGORY_HASH (1ULL<<6)
#define ACL_CATEGORY_STRING (1ULL<<7)
#define ACL_CATEGORY_BITMAP (1ULL<<8)
#define ACL_CATEGORY_HYPERLOGLOG (1ULL<<9)
#define ACL_CATEGORY_GEO (1ULL<<10)
#define ACL_CATEGORY_STREAM (1ULL<<11)
#define ACL_CATEGORY_PUBSUB (1ULL<<12)
#define ACL_CATEGORY_ADMIN (1ULL<<13)
#define ACL_CATEGORY_FAST (1ULL<<14)
#define ACL_CATEGORY_SLOW (1ULL<<15)
#define ACL_CATEGORY_BLOCKING (1ULL<<16)
#define ACL_CATEGORY_DANGEROUS (1ULL<<17)
#define ACL_CATEGORY_CONNECTION (1ULL<<18)
#define ACL_CATEGORY_TRANSACTION (1ULL<<19)
#define ACL_CATEGORY_SCRIPTING (1ULL<<20)
/* Key-spec flags *
* -------------- */
/* The following refer what the command actually does with the value or metadata
* of the key, and not necessarily the user data or how it affects it.
* Each key-spec may must have exactly one of these. Any operation that's not
* distinctly deletion, overwrite or read-only would be marked as RW. */
#define CMD_KEY_RO (1ULL<<0) /* Read-Only - Reads the value of the key, but
* doesn't necessarily returns it. */
#define CMD_KEY_RW (1ULL<<1) /* Read-Write - Modifies the data stored in the
* value of the key or its metadata. */
#define CMD_KEY_OW (1ULL<<2) /* Overwrite - Overwrites the data stored in
* the value of the key. */
#define CMD_KEY_RM (1ULL<<3) /* Deletes the key. */
/* The following refer to user data inside the value of the key, not the metadata
* like LRU, type, cardinality. It refers to the logical operation on the user's
* data (actual input strings / TTL), being used / returned / copied / changed,
* It doesn't refer to modification or returning of metadata (like type, count,
* presence of data). Any write that's not INSERT or DELETE, would be an UPDATE.
* Each key-spec may have one of the writes with or without access, or none: */
#define CMD_KEY_ACCESS (1ULL<<4) /* Returns, copies or uses the user data from
* the value of the key. */
#define CMD_KEY_UPDATE (1ULL<<5) /* Updates data to the value, new value may
* depend on the old value. */
#define CMD_KEY_INSERT (1ULL<<6) /* Adds data to the value with no chance of
* modification or deletion of existing data. */
#define CMD_KEY_DELETE (1ULL<<7) /* Explicitly deletes some content
* from the value of the key. */
/* Other flags: */
#define CMD_KEY_NOT_KEY (1ULL<<8) /* A 'fake' key that should be routed
* like a key in cluster mode but is
* excluded from other key checks. */
#define CMD_KEY_INCOMPLETE (1ULL<<9) /* Means that the keyspec might not point
* out to all keys it should cover */
#define CMD_KEY_VARIABLE_FLAGS (1ULL<<10) /* Means that some keys might have
* different flags depending on arguments */
/* Key flags for when access type is unknown */
#define CMD_KEY_FULL_ACCESS (CMD_KEY_RW | CMD_KEY_ACCESS | CMD_KEY_UPDATE)
/* Key flags for how key is removed */
#define DB_FLAG_KEY_NONE 0
#define DB_FLAG_KEY_DELETED (1ULL<<0)
#define DB_FLAG_KEY_EXPIRED (1ULL<<1)
#define DB_FLAG_KEY_EVICTED (1ULL<<2)
#define DB_FLAG_KEY_OVERWRITE (1ULL<<3)
/* Channel flags share the same flag space as the key flags */
#define CMD_CHANNEL_PATTERN (1ULL<<11) /* The argument is a channel pattern */
#define CMD_CHANNEL_SUBSCRIBE (1ULL<<12) /* The command subscribes to channels */
#define CMD_CHANNEL_UNSUBSCRIBE (1ULL<<13) /* The command unsubscribes to channels */
#define CMD_CHANNEL_PUBLISH (1ULL<<14) /* The command publishes to channels. */
/* AOF states */
#define AOF_OFF 0 /* AOF is off */
#define AOF_ON 1 /* AOF is on */
#define AOF_WAIT_REWRITE 2 /* AOF waits rewrite to start appending */
/* AOF return values for loadAppendOnlyFiles() and loadSingleAppendOnlyFile() */
#define AOF_OK 0
#define AOF_NOT_EXIST 1
#define AOF_EMPTY 2
#define AOF_OPEN_ERR 3
#define AOF_FAILED 4
#define AOF_TRUNCATED 5
/* RDB return values for rdbLoad. */
#define RDB_OK 0
#define RDB_NOT_EXIST 1 /* RDB file doesn't exist. */
#define RDB_FAILED 2 /* Failed to load the RDB file. */
/* Command doc flags */
#define CMD_DOC_NONE 0
#define CMD_DOC_DEPRECATED (1<<0) /* Command is deprecated */
#define CMD_DOC_SYSCMD (1<<1) /* System (internal) command */
/* Client flags */
#define CLIENT_SLAVE (1<<0) /* This client is a replica */
#define CLIENT_MASTER (1<<1) /* This client is a master */
#define CLIENT_MONITOR (1<<2) /* This client is a slave monitor, see MONITOR */
#define CLIENT_MULTI (1<<3) /* This client is in a MULTI context */
#define CLIENT_BLOCKED (1<<4) /* The client is waiting in a blocking operation */
#define CLIENT_DIRTY_CAS (1<<5) /* Watched keys modified. EXEC will fail. */
#define CLIENT_CLOSE_AFTER_REPLY (1<<6) /* Close after writing entire reply. */
#define CLIENT_UNBLOCKED (1<<7) /* This client was unblocked and is stored in
server.unblocked_clients */
#define CLIENT_SCRIPT (1<<8) /* This is a non connected client used by Lua */
#define CLIENT_ASKING (1<<9) /* Client issued the ASKING command */
#define CLIENT_CLOSE_ASAP (1<<10)/* Close this client ASAP */
#define CLIENT_UNIX_SOCKET (1<<11) /* Client connected via Unix domain socket */
#define CLIENT_DIRTY_EXEC (1<<12) /* EXEC will fail for errors while queueing */
#define CLIENT_MASTER_FORCE_REPLY (1<<13) /* Queue replies even if is master */
#define CLIENT_FORCE_AOF (1<<14) /* Force AOF propagation of current cmd. */
#define CLIENT_FORCE_REPL (1<<15) /* Force replication of current cmd. */
#define CLIENT_PRE_PSYNC (1<<16) /* Instance don't understand PSYNC. */
#define CLIENT_READONLY (1<<17) /* Cluster client is in read-only state. */
#define CLIENT_PUBSUB (1<<18) /* Client is in Pub/Sub mode. */
#define CLIENT_PREVENT_AOF_PROP (1<<19) /* Don't propagate to AOF. */
#define CLIENT_PREVENT_REPL_PROP (1<<20) /* Don't propagate to slaves. */
#define CLIENT_PREVENT_PROP (CLIENT_PREVENT_AOF_PROP|CLIENT_PREVENT_REPL_PROP)
#define CLIENT_PENDING_WRITE (1<<21) /* Client has output to send but a write
handler is yet not installed. */
#define CLIENT_REPLY_OFF (1<<22) /* Don't send replies to client. */
#define CLIENT_REPLY_SKIP_NEXT (1<<23) /* Set CLIENT_REPLY_SKIP for next cmd */
#define CLIENT_REPLY_SKIP (1<<24) /* Don't send just this reply. */
#define CLIENT_LUA_DEBUG (1<<25) /* Run EVAL in debug mode. */
#define CLIENT_LUA_DEBUG_SYNC (1<<26) /* EVAL debugging without fork() */
#define CLIENT_MODULE (1<<27) /* Non connected client used by some module. */
#define CLIENT_PROTECTED (1<<28) /* Client should not be freed for now. */
#define CLIENT_EXECUTING_COMMAND (1<<29) /* Indicates that the client is currently in the process of handling
a command. usually this will be marked only during call()
however, blocked clients might have this flag kept until they
will try to reprocess the command. */
#define CLIENT_PENDING_COMMAND (1<<30) /* Indicates the client has a fully
* parsed command ready for execution. */
#define CLIENT_TRACKING (1ULL<<31) /* Client enabled keys tracking in order to
perform client side caching. */
#define CLIENT_TRACKING_BROKEN_REDIR (1ULL<<32) /* Target client is invalid. */
#define CLIENT_TRACKING_BCAST (1ULL<<33) /* Tracking in BCAST mode. */
#define CLIENT_TRACKING_OPTIN (1ULL<<34) /* Tracking in opt-in mode. */
#define CLIENT_TRACKING_OPTOUT (1ULL<<35) /* Tracking in opt-out mode. */
#define CLIENT_TRACKING_CACHING (1ULL<<36) /* CACHING yes/no was given,
depending on optin/optout mode. */
#define CLIENT_TRACKING_NOLOOP (1ULL<<37) /* Don't send invalidation messages
about writes performed by myself.*/
#define CLIENT_IN_TO_TABLE (1ULL<<38) /* This client is in the timeout table. */
#define CLIENT_PROTOCOL_ERROR (1ULL<<39) /* Protocol error chatting with it. */
#define CLIENT_CLOSE_AFTER_COMMAND (1ULL<<40) /* Close after executing commands
* and writing entire reply. */
#define CLIENT_DENY_BLOCKING (1ULL<<41) /* Indicate that the client should not be blocked.
currently, turned on inside MULTI, Lua, RM_Call,
and AOF client */
#define CLIENT_REPL_RDBONLY (1ULL<<42) /* This client is a replica that only wants
RDB without replication buffer. */
#define CLIENT_NO_EVICT (1ULL<<43) /* This client is protected against client
memory eviction. */
#define CLIENT_ALLOW_OOM (1ULL<<44) /* Client used by RM_Call is allowed to fully execute
scripts even when in OOM */
#define CLIENT_NO_TOUCH (1ULL<<45) /* This client will not touch LFU/LRU stats. */
#define CLIENT_PUSHING (1ULL<<46) /* This client is pushing notifications. */
#define CLIENT_MODULE_AUTH_HAS_RESULT (1ULL<<47) /* Indicates a client in the middle of module based
auth had been authenticated from the Module. */
#define CLIENT_MODULE_PREVENT_AOF_PROP (1ULL<<48) /* Module client do not want to propagate to AOF */
#define CLIENT_MODULE_PREVENT_REPL_PROP (1ULL<<49) /* Module client do not want to propagate to replica */
#define CLIENT_REPROCESSING_COMMAND (1ULL<<50) /* The client is re-processing the command. */
/* Client block type (btype field in client structure)
* if CLIENT_BLOCKED flag is set. */
typedef enum blocking_type {
BLOCKED_NONE, /* Not blocked, no CLIENT_BLOCKED flag set. */
BLOCKED_LIST, /* BLPOP & co. */
BLOCKED_WAIT, /* WAIT for synchronous replication. */
BLOCKED_WAITAOF, /* WAITAOF for AOF file fsync. */
BLOCKED_MODULE, /* Blocked by a loadable module. */
BLOCKED_STREAM, /* XREAD. */
BLOCKED_ZSET, /* BZPOP et al. */
BLOCKED_POSTPONE, /* Blocked by processCommand, re-try processing later. */
BLOCKED_SHUTDOWN, /* SHUTDOWN. */
BLOCKED_NUM, /* Number of blocked states. */
BLOCKED_END /* End of enumeration */
} blocking_type;
/* Client request types */
#define PROTO_REQ_INLINE 1
#define PROTO_REQ_MULTIBULK 2
/* Client classes for client limits, currently used only for
* the max-client-output-buffer limit implementation. */
#define CLIENT_TYPE_NORMAL 0 /* Normal req-reply clients + MONITORs */
#define CLIENT_TYPE_SLAVE 1 /* Slaves. */
#define CLIENT_TYPE_PUBSUB 2 /* Clients subscribed to PubSub channels. */
#define CLIENT_TYPE_MASTER 3 /* Master. */
#define CLIENT_TYPE_COUNT 4 /* Total number of client types. */
#define CLIENT_TYPE_OBUF_COUNT 3 /* Number of clients to expose to output
buffer configuration. Just the first
three: normal, slave, pubsub. */
/* Slave replication state. Used in server.repl_state for slaves to remember
* what to do next. */
typedef enum {
REPL_STATE_NONE = 0, /* No active replication */
REPL_STATE_CONNECT, /* Must connect to master */
REPL_STATE_CONNECTING, /* Connecting to master */
/* --- Handshake states, must be ordered --- */
REPL_STATE_RECEIVE_PING_REPLY, /* Wait for PING reply */
REPL_STATE_SEND_HANDSHAKE, /* Send handshake sequence to master */
REPL_STATE_RECEIVE_AUTH_REPLY, /* Wait for AUTH reply */
REPL_STATE_RECEIVE_PORT_REPLY, /* Wait for REPLCONF reply */
REPL_STATE_RECEIVE_IP_REPLY, /* Wait for REPLCONF reply */
REPL_STATE_RECEIVE_CAPA_REPLY, /* Wait for REPLCONF reply */
REPL_STATE_SEND_PSYNC, /* Send PSYNC */
REPL_STATE_RECEIVE_PSYNC_REPLY, /* Wait for PSYNC reply */
/* --- End of handshake states --- */
REPL_STATE_TRANSFER, /* Receiving .rdb from master */
REPL_STATE_CONNECTED, /* Connected to master */
} repl_state;
/* The state of an in progress coordinated failover */
typedef enum {
NO_FAILOVER = 0, /* No failover in progress */
FAILOVER_WAIT_FOR_SYNC, /* Waiting for target replica to catch up */
FAILOVER_IN_PROGRESS /* Waiting for target replica to accept
* PSYNC FAILOVER request. */
} failover_state;
/* State of slaves from the POV of the master. Used in client->replstate.
* In SEND_BULK and ONLINE state the slave receives new updates
* in its output queue. In the WAIT_BGSAVE states instead the server is waiting
* to start the next background saving in order to send updates to it. */
#define SLAVE_STATE_WAIT_BGSAVE_START 6 /* We need to produce a new RDB file. */
#define SLAVE_STATE_WAIT_BGSAVE_END 7 /* Waiting RDB file creation to finish. */
#define SLAVE_STATE_SEND_BULK 8 /* Sending RDB file to slave. */
#define SLAVE_STATE_ONLINE 9 /* RDB file transmitted, sending just updates. */
#define SLAVE_STATE_RDB_TRANSMITTED 10 /* RDB file transmitted - This state is used only for
* a replica that only wants RDB without replication buffer */
/* Slave capabilities. */
#define SLAVE_CAPA_NONE 0
#define SLAVE_CAPA_EOF (1<<0) /* Can parse the RDB EOF streaming format. */
#define SLAVE_CAPA_PSYNC2 (1<<1) /* Supports PSYNC2 protocol. */
/* Slave requirements */
#define SLAVE_REQ_NONE 0
#define SLAVE_REQ_RDB_EXCLUDE_DATA (1 << 0) /* Exclude data from RDB */
#define SLAVE_REQ_RDB_EXCLUDE_FUNCTIONS (1 << 1) /* Exclude functions from RDB */
/* Mask of all bits in the slave requirements bitfield that represent non-standard (filtered) RDB requirements */
#define SLAVE_REQ_RDB_MASK (SLAVE_REQ_RDB_EXCLUDE_DATA | SLAVE_REQ_RDB_EXCLUDE_FUNCTIONS)
/* Synchronous read timeout - slave side */
#define CONFIG_REPL_SYNCIO_TIMEOUT 5
/* The default number of replication backlog blocks to trim per call. */
#define REPL_BACKLOG_TRIM_BLOCKS_PER_CALL 64
/* In order to quickly find the requested offset for PSYNC requests,
* we index some nodes in the replication buffer linked list into a rax. */
#define REPL_BACKLOG_INDEX_PER_BLOCKS 64
/* List related stuff */
#define LIST_HEAD 0
#define LIST_TAIL 1
#define ZSET_MIN 0
#define ZSET_MAX 1
/* Sort operations */
#define SORT_OP_GET 0
/* Log levels */
#define LL_DEBUG 0
#define LL_VERBOSE 1
#define LL_NOTICE 2
#define LL_WARNING 3
#define LL_NOTHING 4
#define LL_RAW (1<<10) /* Modifier to log without timestamp */
/* Supervision options */
#define SUPERVISED_NONE 0
#define SUPERVISED_AUTODETECT 1
#define SUPERVISED_SYSTEMD 2
#define SUPERVISED_UPSTART 3
/* Anti-warning macro... */
#define UNUSED(V) ((void) V)
#define ZSKIPLIST_MAXLEVEL 32 /* Should be enough for 2^64 elements */
#define ZSKIPLIST_P 0.25 /* Skiplist P = 1/4 */
#define ZSKIPLIST_MAX_SEARCH 10
/* Append only defines */
#define AOF_FSYNC_NO 0
#define AOF_FSYNC_ALWAYS 1
#define AOF_FSYNC_EVERYSEC 2
/* Replication diskless load defines */
#define REPL_DISKLESS_LOAD_DISABLED 0
#define REPL_DISKLESS_LOAD_WHEN_DB_EMPTY 1
#define REPL_DISKLESS_LOAD_SWAPDB 2
/* TLS Client Authentication */
#define TLS_CLIENT_AUTH_NO 0
#define TLS_CLIENT_AUTH_YES 1
#define TLS_CLIENT_AUTH_OPTIONAL 2
/* Sanitize dump payload */
#define SANITIZE_DUMP_NO 0
#define SANITIZE_DUMP_YES 1
#define SANITIZE_DUMP_CLIENTS 2
/* Enable protected config/command */
#define PROTECTED_ACTION_ALLOWED_NO 0
#define PROTECTED_ACTION_ALLOWED_YES 1
#define PROTECTED_ACTION_ALLOWED_LOCAL 2
/* Sets operations codes */
#define SET_OP_UNION 0
#define SET_OP_DIFF 1
#define SET_OP_INTER 2
/* oom-score-adj defines */
#define OOM_SCORE_ADJ_NO 0
#define OOM_SCORE_RELATIVE 1
#define OOM_SCORE_ADJ_ABSOLUTE 2
/* Redis maxmemory strategies. Instead of using just incremental number
* for this defines, we use a set of flags so that testing for certain
* properties common to multiple policies is faster. */
#define MAXMEMORY_FLAG_LRU (1<<0)
#define MAXMEMORY_FLAG_LFU (1<<1)
#define MAXMEMORY_FLAG_ALLKEYS (1<<2)
#define MAXMEMORY_FLAG_NO_SHARED_INTEGERS \
(MAXMEMORY_FLAG_LRU|MAXMEMORY_FLAG_LFU)
#define MAXMEMORY_VOLATILE_LRU ((0<<8)|MAXMEMORY_FLAG_LRU)
#define MAXMEMORY_VOLATILE_LFU ((1<<8)|MAXMEMORY_FLAG_LFU)
#define MAXMEMORY_VOLATILE_TTL (2<<8)
#define MAXMEMORY_VOLATILE_RANDOM (3<<8)
#define MAXMEMORY_ALLKEYS_LRU ((4<<8)|MAXMEMORY_FLAG_LRU|MAXMEMORY_FLAG_ALLKEYS)
#define MAXMEMORY_ALLKEYS_LFU ((5<<8)|MAXMEMORY_FLAG_LFU|MAXMEMORY_FLAG_ALLKEYS)
#define MAXMEMORY_ALLKEYS_RANDOM ((6<<8)|MAXMEMORY_FLAG_ALLKEYS)
#define MAXMEMORY_NO_EVICTION (7<<8)
/* Units */
#define UNIT_SECONDS 0
#define UNIT_MILLISECONDS 1
/* SHUTDOWN flags */
#define SHUTDOWN_NOFLAGS 0 /* No flags. */
#define SHUTDOWN_SAVE 1 /* Force SAVE on SHUTDOWN even if no save
points are configured. */
#define SHUTDOWN_NOSAVE 2 /* Don't SAVE on SHUTDOWN. */
#define SHUTDOWN_NOW 4 /* Don't wait for replicas to catch up. */
#define SHUTDOWN_FORCE 8 /* Don't let errors prevent shutdown. */
/* Command call flags, see call() function */
#define CMD_CALL_NONE 0
#define CMD_CALL_PROPAGATE_AOF (1<<0)
#define CMD_CALL_PROPAGATE_REPL (1<<1)
#define CMD_CALL_REPROCESSING (1<<2)
#define CMD_CALL_FROM_MODULE (1<<3) /* From RM_Call */
#define CMD_CALL_PROPAGATE (CMD_CALL_PROPAGATE_AOF|CMD_CALL_PROPAGATE_REPL)
#define CMD_CALL_FULL (CMD_CALL_PROPAGATE)
/* Command propagation flags, see propagateNow() function */
#define PROPAGATE_NONE 0
#define PROPAGATE_AOF 1
#define PROPAGATE_REPL 2
/* Actions pause types */
#define PAUSE_ACTION_CLIENT_WRITE (1<<0)
#define PAUSE_ACTION_CLIENT_ALL (1<<1) /* must be bigger than PAUSE_ACTION_CLIENT_WRITE */
#define PAUSE_ACTION_EXPIRE (1<<2)
#define PAUSE_ACTION_EVICT (1<<3)
#define PAUSE_ACTION_REPLICA (1<<4) /* pause replica traffic */
/* common sets of actions to pause/unpause */
#define PAUSE_ACTIONS_CLIENT_WRITE_SET (PAUSE_ACTION_CLIENT_WRITE|\
PAUSE_ACTION_EXPIRE|\
PAUSE_ACTION_EVICT|\
PAUSE_ACTION_REPLICA)
#define PAUSE_ACTIONS_CLIENT_ALL_SET (PAUSE_ACTION_CLIENT_ALL|\
PAUSE_ACTION_EXPIRE|\
PAUSE_ACTION_EVICT|\
PAUSE_ACTION_REPLICA)
/* Client pause purposes. Each purpose has its own end time and pause type. */
typedef enum {
PAUSE_BY_CLIENT_COMMAND = 0,
PAUSE_DURING_SHUTDOWN,
PAUSE_DURING_FAILOVER,
NUM_PAUSE_PURPOSES /* This value is the number of purposes above. */
} pause_purpose;
typedef struct {
uint32_t paused_actions; /* Bitmask of actions */
mstime_t end;
} pause_event;
/* Ways that a clusters endpoint can be described */
typedef enum {
CLUSTER_ENDPOINT_TYPE_IP = 0, /* Show IP address */
CLUSTER_ENDPOINT_TYPE_HOSTNAME, /* Show hostname */
CLUSTER_ENDPOINT_TYPE_UNKNOWN_ENDPOINT /* Show NULL or empty */
} cluster_endpoint_type;
/* RDB active child save type. */
#define RDB_CHILD_TYPE_NONE 0
#define RDB_CHILD_TYPE_DISK 1 /* RDB is written to disk. */
#define RDB_CHILD_TYPE_SOCKET 2 /* RDB is written to slave socket. */
/* Keyspace changes notification classes. Every class is associated with a
* character for configuration purposes. */
#define NOTIFY_KEYSPACE (1<<0) /* K */
#define NOTIFY_KEYEVENT (1<<1) /* E */
#define NOTIFY_GENERIC (1<<2) /* g */
#define NOTIFY_STRING (1<<3) /* $ */
#define NOTIFY_LIST (1<<4) /* l */
#define NOTIFY_SET (1<<5) /* s */
#define NOTIFY_HASH (1<<6) /* h */
#define NOTIFY_ZSET (1<<7) /* z */
#define NOTIFY_EXPIRED (1<<8) /* x */
#define NOTIFY_EVICTED (1<<9) /* e */
#define NOTIFY_STREAM (1<<10) /* t */
#define NOTIFY_KEY_MISS (1<<11) /* m (Note: This one is excluded from NOTIFY_ALL on purpose) */
#define NOTIFY_LOADED (1<<12) /* module only key space notification, indicate a key loaded from rdb */
#define NOTIFY_MODULE (1<<13) /* d, module key space notification */
#define NOTIFY_NEW (1<<14) /* n, new key notification */
#define NOTIFY_ALL (NOTIFY_GENERIC | NOTIFY_STRING | NOTIFY_LIST | NOTIFY_SET | NOTIFY_HASH | NOTIFY_ZSET | NOTIFY_EXPIRED | NOTIFY_EVICTED | NOTIFY_STREAM | NOTIFY_MODULE) /* A flag */
/* Using the following macro you can run code inside serverCron() with the
* specified period, specified in milliseconds.
* The actual resolution depends on server.hz. */
#define run_with_period(_ms_) if (((_ms_) <= 1000/server.hz) || !(server.cronloops%((_ms_)/(1000/server.hz))))
/* We can print the stacktrace, so our assert is defined this way: */
#define serverAssertWithInfo(_c,_o,_e) (likely(_e)?(void)0 : (_serverAssertWithInfo(_c,_o,#_e,__FILE__,__LINE__),redis_unreachable()))
#define serverAssert(_e) (likely(_e)?(void)0 : (_serverAssert(#_e,__FILE__,__LINE__),redis_unreachable()))
#define serverPanic(...) _serverPanic(__FILE__,__LINE__,__VA_ARGS__),redis_unreachable()
/* The following macros provide assertions that are only executed during test builds and should be used to add
* assertions that are too computationally expensive or dangerous to run during normal operations. */
#ifdef DEBUG_ASSERTIONS
#define debugServerAssertWithInfo(...) serverAssertWithInfo(__VA_ARGS__)
#else
#define debugServerAssertWithInfo(...)
#endif
/* latency histogram per command init settings */
#define LATENCY_HISTOGRAM_MIN_VALUE 1L /* >= 1 nanosec */
#define LATENCY_HISTOGRAM_MAX_VALUE 1000000000L /* <= 1 secs */
#define LATENCY_HISTOGRAM_PRECISION 2 /* Maintain a value precision of 2 significant digits across LATENCY_HISTOGRAM_MIN_VALUE and LATENCY_HISTOGRAM_MAX_VALUE range.
* Value quantization within the range will thus be no larger than 1/100th (or 1%) of any value.
* The total size per histogram should sit around 40 KiB Bytes. */
/* Busy module flags, see busy_module_yield_flags */
#define BUSY_MODULE_YIELD_NONE (0)
#define BUSY_MODULE_YIELD_EVENTS (1<<0)
#define BUSY_MODULE_YIELD_CLIENTS (1<<1)
/*-----------------------------------------------------------------------------
* Data types
*----------------------------------------------------------------------------*/
/* A redis object, that is a type able to hold a string / list / set */
/* The actual Redis Object */
#define OBJ_STRING 0 /* String object. */
#define OBJ_LIST 1 /* List object. */
#define OBJ_SET 2 /* Set object. */
#define OBJ_ZSET 3 /* Sorted set object. */
#define OBJ_HASH 4 /* Hash object. */
/* The "module" object type is a special one that signals that the object
* is one directly managed by a Redis module. In this case the value points
* to a moduleValue struct, which contains the object value (which is only
* handled by the module itself) and the RedisModuleType struct which lists
* function pointers in order to serialize, deserialize, AOF-rewrite and
* free the object.
*
* Inside the RDB file, module types are encoded as OBJ_MODULE followed
* by a 64 bit module type ID, which has a 54 bits module-specific signature
* in order to dispatch the loading to the right module, plus a 10 bits
* encoding version. */
#define OBJ_MODULE 5 /* Module object. */
#define OBJ_STREAM 6 /* Stream object. */
#define OBJ_TYPE_MAX 7 /* Maximum number of object types */
/* Extract encver / signature from a module type ID. */
#define REDISMODULE_TYPE_ENCVER_BITS 10
#define REDISMODULE_TYPE_ENCVER_MASK ((1<<REDISMODULE_TYPE_ENCVER_BITS)-1)
#define REDISMODULE_TYPE_ENCVER(id) ((id) & REDISMODULE_TYPE_ENCVER_MASK)
#define REDISMODULE_TYPE_SIGN(id) (((id) & ~((uint64_t)REDISMODULE_TYPE_ENCVER_MASK)) >>REDISMODULE_TYPE_ENCVER_BITS)
/* Bit flags for moduleTypeAuxSaveFunc */
#define REDISMODULE_AUX_BEFORE_RDB (1<<0)
#define REDISMODULE_AUX_AFTER_RDB (1<<1)
struct RedisModule;
struct RedisModuleIO;
struct RedisModuleDigest;
struct RedisModuleCtx;
struct moduleLoadQueueEntry;
struct RedisModuleKeyOptCtx;
struct RedisModuleCommand;
struct clusterState;
/* Each module type implementation should export a set of methods in order
* to serialize and deserialize the value in the RDB file, rewrite the AOF
* log, create the digest for "DEBUG DIGEST", and free the value when a key
* is deleted. */
typedef void *(*moduleTypeLoadFunc)(struct RedisModuleIO *io, int encver);
typedef void (*moduleTypeSaveFunc)(struct RedisModuleIO *io, void *value);
typedef int (*moduleTypeAuxLoadFunc)(struct RedisModuleIO *rdb, int encver, int when);
typedef void (*moduleTypeAuxSaveFunc)(struct RedisModuleIO *rdb, int when);
typedef void (*moduleTypeRewriteFunc)(struct RedisModuleIO *io, struct redisObject *key, void *value);
typedef void (*moduleTypeDigestFunc)(struct RedisModuleDigest *digest, void *value);
typedef size_t (*moduleTypeMemUsageFunc)(const void *value);
typedef void (*moduleTypeFreeFunc)(void *value);
typedef size_t (*moduleTypeFreeEffortFunc)(struct redisObject *key, const void *value);
typedef void (*moduleTypeUnlinkFunc)(struct redisObject *key, void *value);
typedef void *(*moduleTypeCopyFunc)(struct redisObject *fromkey, struct redisObject *tokey, const void *value);
typedef int (*moduleTypeDefragFunc)(struct RedisModuleDefragCtx *ctx, struct redisObject *key, void **value);
typedef size_t (*moduleTypeMemUsageFunc2)(struct RedisModuleKeyOptCtx *ctx, const void *value, size_t sample_size);
typedef void (*moduleTypeFreeFunc2)(struct RedisModuleKeyOptCtx *ctx, void *value);
typedef size_t (*moduleTypeFreeEffortFunc2)(struct RedisModuleKeyOptCtx *ctx, const void *value);
typedef void (*moduleTypeUnlinkFunc2)(struct RedisModuleKeyOptCtx *ctx, void *value);
typedef void *(*moduleTypeCopyFunc2)(struct RedisModuleKeyOptCtx *ctx, const void *value);
typedef int (*moduleTypeAuthCallback)(struct RedisModuleCtx *ctx, void *username, void *password, const char **err);
/* The module type, which is referenced in each value of a given type, defines
* the methods and links to the module exporting the type. */
typedef struct RedisModuleType {
uint64_t id; /* Higher 54 bits of type ID + 10 lower bits of encoding ver. */
struct RedisModule *module;
moduleTypeLoadFunc rdb_load;
moduleTypeSaveFunc rdb_save;
moduleTypeRewriteFunc aof_rewrite;
moduleTypeMemUsageFunc mem_usage;
moduleTypeDigestFunc digest;
moduleTypeFreeFunc free;
moduleTypeFreeEffortFunc free_effort;
moduleTypeUnlinkFunc unlink;
moduleTypeCopyFunc copy;
moduleTypeDefragFunc defrag;
moduleTypeAuxLoadFunc aux_load;
moduleTypeAuxSaveFunc aux_save;
moduleTypeMemUsageFunc2 mem_usage2;
moduleTypeFreeEffortFunc2 free_effort2;
moduleTypeUnlinkFunc2 unlink2;
moduleTypeCopyFunc2 copy2;
moduleTypeAuxSaveFunc aux_save2;
int aux_save_triggers;
char name[10]; /* 9 bytes name + null term. Charset: A-Z a-z 0-9 _- */
} moduleType;
/* In Redis objects 'robj' structures of type OBJ_MODULE, the value pointer
* is set to the following structure, referencing the moduleType structure
* in order to work with the value, and at the same time providing a raw
* pointer to the value, as created by the module commands operating with
* the module type.
*
* So for example in order to free such a value, it is possible to use
* the following code:
*
* if (robj->type == OBJ_MODULE) {
* moduleValue *mt = robj->ptr;
* mt->type->free(mt->value);
* zfree(mt); // We need to release this in-the-middle struct as well.
* }
*/
typedef struct moduleValue {
moduleType *type;
void *value;
} moduleValue;
/* This structure represents a module inside the system. */
struct RedisModule {
void *handle; /* Module dlopen() handle. */
char *name; /* Module name. */
int ver; /* Module version. We use just progressive integers. */
int apiver; /* Module API version as requested during initialization.*/
list *types; /* Module data types. */
list *usedby; /* List of modules using APIs from this one. */
list *using; /* List of modules we use some APIs of. */
list *filters; /* List of filters the module has registered. */
list *module_configs; /* List of configurations the module has registered */
int configs_initialized; /* Have the module configurations been initialized? */
int in_call; /* RM_Call() nesting level */
int in_hook; /* Hooks callback nesting level for this module (0 or 1). */
int options; /* Module options and capabilities. */
int blocked_clients; /* Count of RedisModuleBlockedClient in this module. */
RedisModuleInfoFunc info_cb; /* Callback for module to add INFO fields. */
RedisModuleDefragFunc defrag_cb; /* Callback for global data defrag. */
struct moduleLoadQueueEntry *loadmod; /* Module load arguments for config rewrite. */
int num_commands_with_acl_categories; /* Number of commands in this module included in acl categories */
int onload; /* Flag to identify if the call is being made from Onload (0 or 1) */
size_t num_acl_categories_added; /* Number of acl categories added by this module. */
};
typedef struct RedisModule RedisModule;
/* This is a wrapper for the 'rio' streams used inside rdb.c in Redis, so that
* the user does not have to take the total count of the written bytes nor
* to care about error conditions. */
struct RedisModuleIO {
size_t bytes; /* Bytes read / written so far. */
rio *rio; /* Rio stream. */
moduleType *type; /* Module type doing the operation. */
int error; /* True if error condition happened. */
struct RedisModuleCtx *ctx; /* Optional context, see RM_GetContextFromIO()*/
struct redisObject *key; /* Optional name of key processed */
int dbid; /* The dbid of the key being processed, -1 when unknown. */
sds pre_flush_buffer; /* A buffer that should be flushed before next write operation
* See rdbSaveSingleModuleAux for more details */
};
/* Macro to initialize an IO context. Note that the 'ver' field is populated
* inside rdb.c according to the version of the value to load. */
#define moduleInitIOContext(iovar,mtype,rioptr,keyptr,db) do { \
iovar.rio = rioptr; \
iovar.type = mtype; \
iovar.bytes = 0; \
iovar.error = 0; \
iovar.key = keyptr; \
iovar.dbid = db; \
iovar.ctx = NULL; \
iovar.pre_flush_buffer = NULL; \
} while(0)
/* This is a structure used to export DEBUG DIGEST capabilities to Redis
* modules. We want to capture both the ordered and unordered elements of
* a data structure, so that a digest can be created in a way that correctly
* reflects the values. See the DEBUG DIGEST command implementation for more
* background. */
struct RedisModuleDigest {
unsigned char o[20]; /* Ordered elements. */
unsigned char x[20]; /* Xored elements. */
struct redisObject *key; /* Optional name of key processed */
int dbid; /* The dbid of the key being processed */
};
/* Just start with a digest composed of all zero bytes. */
#define moduleInitDigestContext(mdvar) do { \
memset(mdvar.o,0,sizeof(mdvar.o)); \
memset(mdvar.x,0,sizeof(mdvar.x)); \
} while(0)
/* Macro to check if the client is in the middle of module based authentication. */
#define clientHasModuleAuthInProgress(c) ((c)->module_auth_ctx != NULL)
/* Objects encoding. Some kind of objects like Strings and Hashes can be
* internally represented in multiple ways. The 'encoding' field of the object
* is set to one of this fields for this object. */
#define OBJ_ENCODING_RAW 0 /* Raw representation */
#define OBJ_ENCODING_INT 1 /* Encoded as integer */
#define OBJ_ENCODING_HT 2 /* Encoded as hash table */
#define OBJ_ENCODING_ZIPMAP 3 /* No longer used: old hash encoding. */
#define OBJ_ENCODING_LINKEDLIST 4 /* No longer used: old list encoding. */
#define OBJ_ENCODING_ZIPLIST 5 /* No longer used: old list/hash/zset encoding. */
#define OBJ_ENCODING_INTSET 6 /* Encoded as intset */
#define OBJ_ENCODING_SKIPLIST 7 /* Encoded as skiplist */
#define OBJ_ENCODING_EMBSTR 8 /* Embedded sds string encoding */
#define OBJ_ENCODING_QUICKLIST 9 /* Encoded as linked list of listpacks */
#define OBJ_ENCODING_STREAM 10 /* Encoded as a radix tree of listpacks */
#define OBJ_ENCODING_LISTPACK 11 /* Encoded as a listpack */
#define LRU_BITS 24
#define LRU_CLOCK_MAX ((1<<LRU_BITS)-1) /* Max value of obj->lru */
#define LRU_CLOCK_RESOLUTION 1000 /* LRU clock resolution in ms */
#define OBJ_SHARED_REFCOUNT INT_MAX /* Global object never destroyed. */
#define OBJ_STATIC_REFCOUNT (INT_MAX-1) /* Object allocated in the stack. */
#define OBJ_FIRST_SPECIAL_REFCOUNT OBJ_STATIC_REFCOUNT
struct redisObject {
unsigned type:4;
unsigned encoding:4;
unsigned lru:LRU_BITS; /* LRU time (relative to global lru_clock) or
* LFU data (least significant 8 bits frequency
* and most significant 16 bits access time). */
int refcount;
void *ptr;
};
/* The string name for an object's type as listed above
* Native types are checked against the OBJ_STRING, OBJ_LIST, OBJ_* defines,
* and Module types have their registered name returned. */
char *getObjectTypeName(robj*);
/* Macro used to initialize a Redis object allocated on the stack.
* Note that this macro is taken near the structure definition to make sure
* we'll update it when the structure is changed, to avoid bugs like
* bug #85 introduced exactly in this way. */
#define initStaticStringObject(_var,_ptr) do { \
_var.refcount = OBJ_STATIC_REFCOUNT; \
_var.type = OBJ_STRING; \
_var.encoding = OBJ_ENCODING_RAW; \
_var.ptr = _ptr; \
} while(0)
struct evictionPoolEntry; /* Defined in evict.c */
/* This structure is used in order to represent the output buffer of a client,
* which is actually a linked list of blocks like that, that is: client->reply. */
typedef struct clientReplyBlock {
size_t size, used;
char buf[];
} clientReplyBlock;
/* Replication buffer blocks is the list of replBufBlock.
*
* +--------------+ +--------------+ +--------------+
* | refcount = 1 | ... | refcount = 0 | ... | refcount = 2 |
* +--------------+ +--------------+ +--------------+
* | / \
* | / \
* | / \
* Repl Backlog Replica_A Replica_B
*
* Each replica or replication backlog increments only the refcount of the
* 'ref_repl_buf_node' which it points to. So when replica walks to the next
* node, it should first increase the next node's refcount, and when we trim
* the replication buffer nodes, we remove node always from the head node which
* refcount is 0. If the refcount of the head node is not 0, we must stop
* trimming and never iterate the next node. */
/* Similar with 'clientReplyBlock', it is used for shared buffers between
* all replica clients and replication backlog. */
typedef struct replBufBlock {
int refcount; /* Number of replicas or repl backlog using. */
long long id; /* The unique incremental number. */
long long repl_offset; /* Start replication offset of the block. */
size_t size, used;
char buf[];
} replBufBlock;
/* Redis database representation. There are multiple databases identified
* by integers from 0 (the default database) up to the max configured
* database. The database number is the 'id' field in the structure. */
typedef struct redisDb {
kvstore *keys; /* The keyspace for this DB */
kvstore *expires; /* Timeout of keys with a timeout set */
dict *blocking_keys; /* Keys with clients waiting for data (BLPOP)*/
dict *blocking_keys_unblock_on_nokey; /* Keys with clients waiting for
* data, and should be unblocked if key is deleted (XREADEDGROUP).
* This is a subset of blocking_keys*/
dict *ready_keys; /* Blocked keys that received a PUSH */
dict *watched_keys; /* WATCHED keys for MULTI/EXEC CAS */
int id; /* Database ID */
long long avg_ttl; /* Average TTL, just for stats */
unsigned long expires_cursor; /* Cursor of the active expire cycle. */
list *defrag_later; /* List of key names to attempt to defrag one by one, gradually. */
} redisDb;
/* forward declaration for functions ctx */
typedef struct functionsLibCtx functionsLibCtx;
/* Holding object that need to be populated during
* rdb loading. On loading end it is possible to decide
* whether not to set those objects on their rightful place.
* For example: dbarray need to be set as main database on
* successful loading and dropped on failure. */
typedef struct rdbLoadingCtx {
redisDb* dbarray;
functionsLibCtx* functions_lib_ctx;
}rdbLoadingCtx;
/* Client MULTI/EXEC state */
typedef struct multiCmd {
robj **argv;
int argv_len;
int argc;
struct redisCommand *cmd;
} multiCmd;
typedef struct multiState {
multiCmd *commands; /* Array of MULTI commands */
int count; /* Total number of MULTI commands */
int cmd_flags; /* The accumulated command flags OR-ed together.
So if at least a command has a given flag, it
will be set in this field. */
int cmd_inv_flags; /* Same as cmd_flags, OR-ing the ~flags. so that it
is possible to know if all the commands have a
certain flag. */
size_t argv_len_sums; /* mem used by all commands arguments */
int alloc_count; /* total number of multiCmd struct memory reserved. */
} multiState;
/* This structure holds the blocking operation state for a client.
* The fields used depend on client->btype. */
typedef struct blockingState {
/* Generic fields. */
blocking_type btype; /* Type of blocking op if CLIENT_BLOCKED. */
mstime_t timeout; /* Blocking operation timeout. If UNIX current time
* is > timeout then the operation timed out. */
int unblock_on_nokey; /* Whether to unblock the client when at least one of the keys
is deleted or does not exist anymore */
/* BLOCKED_LIST, BLOCKED_ZSET and BLOCKED_STREAM or any other Keys related blocking */
dict *keys; /* The keys we are blocked on */
/* BLOCKED_WAIT and BLOCKED_WAITAOF */
int numreplicas; /* Number of replicas we are waiting for ACK. */
int numlocal; /* Indication if WAITAOF is waiting for local fsync. */
long long reploffset; /* Replication offset to reach. */
/* BLOCKED_MODULE */
void *module_blocked_handle; /* RedisModuleBlockedClient structure.
which is opaque for the Redis core, only
handled in module.c. */
void *async_rm_call_handle; /* RedisModuleAsyncRMCallPromise structure.
which is opaque for the Redis core, only
handled in module.c. */
} blockingState;
/* The following structure represents a node in the server.ready_keys list,
* where we accumulate all the keys that had clients blocked with a blocking
* operation such as B[LR]POP, but received new data in the context of the
* last executed command.
*
* After the execution of every command or script, we iterate over this list to check
* if as a result we should serve data to clients blocked, unblocking them.
* Note that server.ready_keys will not have duplicates as there dictionary
* also called ready_keys in every structure representing a Redis database,
* where we make sure to remember if a given key was already added in the
* server.ready_keys list. */
typedef struct readyList {
redisDb *db;
robj *key;
} readyList;
/* This structure represents a Redis user. This is useful for ACLs, the
* user is associated to the connection after the connection is authenticated.
* If there is no associated user, the connection uses the default user. */
#define USER_COMMAND_BITS_COUNT 1024 /* The total number of command bits
in the user structure. The last valid
command ID we can set in the user
is USER_COMMAND_BITS_COUNT-1. */
#define USER_FLAG_ENABLED (1<<0) /* The user is active. */
#define USER_FLAG_DISABLED (1<<1) /* The user is disabled. */
#define USER_FLAG_NOPASS (1<<2) /* The user requires no password, any
provided password will work. For the
default user, this also means that
no AUTH is needed, and every
connection is immediately
authenticated. */
#define USER_FLAG_SANITIZE_PAYLOAD (1<<3) /* The user require a deep RESTORE
* payload sanitization. */
#define USER_FLAG_SANITIZE_PAYLOAD_SKIP (1<<4) /* The user should skip the
* deep sanitization of RESTORE
* payload. */
#define SELECTOR_FLAG_ROOT (1<<0) /* This is the root user permission
* selector. */
#define SELECTOR_FLAG_ALLKEYS (1<<1) /* The user can mention any key. */
#define SELECTOR_FLAG_ALLCOMMANDS (1<<2) /* The user can run all commands. */
#define SELECTOR_FLAG_ALLCHANNELS (1<<3) /* The user can mention any Pub/Sub
channel. */
typedef struct {
sds name; /* The username as an SDS string. */
uint32_t flags; /* See USER_FLAG_* */
list *passwords; /* A list of SDS valid passwords for this user. */
list *selectors; /* A list of selectors this user validates commands
against. This list will always contain at least
one selector for backwards compatibility. */
robj *acl_string; /* cached string represent of ACLs */
} user;
/* With multiplexing we need to take per-client state.
* Clients are taken in a linked list. */
#define CLIENT_ID_AOF (UINT64_MAX) /* Reserved ID for the AOF client. If you
need more reserved IDs use UINT64_MAX-1,
-2, ... and so forth. */
/* Replication backlog is not a separate memory, it just is one consumer of
* the global replication buffer. This structure records the reference of
* replication buffers. Since the replication buffer block list may be very long,
* it would cost much time to search replication offset on partial resync, so
* we use one rax tree to index some blocks every REPL_BACKLOG_INDEX_PER_BLOCKS
* to make searching offset from replication buffer blocks list faster. */
typedef struct replBacklog {
listNode *ref_repl_buf_node; /* Referenced node of replication buffer blocks,
* see the definition of replBufBlock. */
size_t unindexed_count; /* The count from last creating index block. */
rax *blocks_index; /* The index of recorded blocks of replication
* buffer for quickly searching replication
* offset on partial resynchronization. */
long long histlen; /* Backlog actual data length */
long long offset; /* Replication "master offset" of first
* byte in the replication backlog buffer.*/
} replBacklog;
typedef struct {
list *clients;
size_t mem_usage_sum;
} clientMemUsageBucket;
#ifdef LOG_REQ_RES
/* Structure used to log client's requests and their
* responses (see logreqres.c) */
typedef struct {
/* General */
int argv_logged; /* 1 if the command was logged */
/* Vars for log buffer */
unsigned char *buf; /* Buffer holding the data (request and response) */
size_t used;
size_t capacity;
/* Vars for offsets within the client's reply */
struct {
/* General */
int saved; /* 1 if we already saved the offset (first time we call addReply*) */
/* Offset within the static reply buffer */
int bufpos;
/* Offset within the reply block list */
struct {
int index;
size_t used;
} last_node;
} offset;
} clientReqResInfo;
#endif
typedef struct client {
uint64_t id; /* Client incremental unique ID. */
uint64_t flags; /* Client flags: CLIENT_* macros. */
connection *conn;
int resp; /* RESP protocol version. Can be 2 or 3. */
redisDb *db; /* Pointer to currently SELECTed DB. */
robj *name; /* As set by CLIENT SETNAME. */
robj *lib_name; /* The client library name as set by CLIENT SETINFO. */
robj *lib_ver; /* The client library version as set by CLIENT SETINFO. */
sds querybuf; /* Buffer we use to accumulate client queries. */
size_t qb_pos; /* The position we have read in querybuf. */
size_t querybuf_peak; /* Recent (100ms or more) peak of querybuf size. */
int argc; /* Num of arguments of current command. */
robj **argv; /* Arguments of current command. */
int argv_len; /* Size of argv array (may be more than argc) */
int original_argc; /* Num of arguments of original command if arguments were rewritten. */
robj **original_argv; /* Arguments of original command if arguments were rewritten. */
size_t argv_len_sum; /* Sum of lengths of objects in argv list. */
struct redisCommand *cmd, *lastcmd; /* Last command executed. */
struct redisCommand *realcmd; /* The original command that was executed by the client,
Used to update error stats in case the c->cmd was modified
during the command invocation (like on GEOADD for example). */
user *user; /* User associated with this connection. If the
user is set to NULL the connection can do
anything (admin). */
int reqtype; /* Request protocol type: PROTO_REQ_* */
int multibulklen; /* Number of multi bulk arguments left to read. */
long bulklen; /* Length of bulk argument in multi bulk request. */
list *reply; /* List of reply objects to send to the client. */
unsigned long long reply_bytes; /* Tot bytes of objects in reply list. */
list *deferred_reply_errors; /* Used for module thread safe contexts. */
size_t sentlen; /* Amount of bytes already sent in the current
buffer or object being sent. */
time_t ctime; /* Client creation time. */
long duration; /* Current command duration. Used for measuring latency of blocking/non-blocking cmds */
int slot; /* The slot the client is executing against. Set to -1 if no slot is being used */
dictEntry *cur_script; /* Cached pointer to the dictEntry of the script being executed. */
time_t lastinteraction; /* Time of the last interaction, used for timeout */
time_t obuf_soft_limit_reached_time;
int authenticated; /* Needed when the default user requires auth. */
int replstate; /* Replication state if this is a slave. */
int repl_start_cmd_stream_on_ack; /* Install slave write handler on first ACK. */
int repldbfd; /* Replication DB file descriptor. */
off_t repldboff; /* Replication DB file offset. */
off_t repldbsize; /* Replication DB file size. */
sds replpreamble; /* Replication DB preamble. */
long long read_reploff; /* Read replication offset if this is a master. */
long long reploff; /* Applied replication offset if this is a master. */
long long repl_applied; /* Applied replication data count in querybuf, if this is a replica. */
long long repl_ack_off; /* Replication ack offset, if this is a slave. */
long long repl_aof_off; /* Replication AOF fsync ack offset, if this is a slave. */
long long repl_ack_time;/* Replication ack time, if this is a slave. */
long long repl_last_partial_write; /* The last time the server did a partial write from the RDB child pipe to this replica */
long long psync_initial_offset; /* FULLRESYNC reply offset other slaves
copying this slave output buffer
should use. */
char replid[CONFIG_RUN_ID_SIZE+1]; /* Master replication ID (if master). */
int slave_listening_port; /* As configured with: REPLCONF listening-port */
char *slave_addr; /* Optionally given by REPLCONF ip-address */
int slave_capa; /* Slave capabilities: SLAVE_CAPA_* bitwise OR. */
int slave_req; /* Slave requirements: SLAVE_REQ_* */
multiState mstate; /* MULTI/EXEC state */
blockingState bstate; /* blocking state */
long long woff; /* Last write global replication offset. */
list *watched_keys; /* Keys WATCHED for MULTI/EXEC CAS */
dict *pubsub_channels; /* channels a client is interested in (SUBSCRIBE) */
dict *pubsub_patterns; /* patterns a client is interested in (PSUBSCRIBE) */
dict *pubsubshard_channels; /* shard level channels a client is interested in (SSUBSCRIBE) */
sds peerid; /* Cached peer ID. */
sds sockname; /* Cached connection target address. */
listNode *client_list_node; /* list node in client list */
listNode *postponed_list_node; /* list node within the postponed list */
listNode *pending_read_list_node; /* list node in clients pending read list */
void *module_blocked_client; /* Pointer to the RedisModuleBlockedClient associated with this
* client. This is set in case of module authentication before the
* unblocked client is reprocessed to handle reply callbacks. */
void *module_auth_ctx; /* Ongoing / attempted module based auth callback's ctx.
* This is only tracked within the context of the command attempting
* authentication. If not NULL, it means module auth is in progress. */
RedisModuleUserChangedFunc auth_callback; /* Module callback to execute
* when the authenticated user
* changes. */
void *auth_callback_privdata; /* Private data that is passed when the auth
* changed callback is executed. Opaque for
* Redis Core. */
void *auth_module; /* The module that owns the callback, which is used
* to disconnect the client if the module is
* unloaded for cleanup. Opaque for Redis Core.*/
/* If this client is in tracking mode and this field is non zero,
* invalidation messages for keys fetched by this client will be sent to
* the specified client ID. */
uint64_t client_tracking_redirection;
rax *client_tracking_prefixes; /* A dictionary of prefixes we are already
subscribed to in BCAST mode, in the
context of client side caching. */
/* In updateClientMemoryUsage() we track the memory usage of
* each client and add it to the sum of all the clients of a given type,
* however we need to remember what was the old contribution of each
* client, and in which category the client was, in order to remove it
* before adding it the new value. */
size_t last_memory_usage;
int last_memory_type;
listNode *mem_usage_bucket_node;
clientMemUsageBucket *mem_usage_bucket;
listNode *ref_repl_buf_node; /* Referenced node of replication buffer blocks,
* see the definition of replBufBlock. */
size_t ref_block_pos; /* Access position of referenced buffer block,
* i.e. the next offset to send. */
/* list node in clients_pending_write list */
listNode clients_pending_write_node;
/* Response buffer */
size_t buf_peak; /* Peak used size of buffer in last 5 sec interval. */
mstime_t buf_peak_last_reset_time; /* keeps the last time the buffer peak value was reset */
int bufpos;
size_t buf_usable_size; /* Usable size of buffer. */
char *buf;
#ifdef LOG_REQ_RES
clientReqResInfo reqres;
#endif
} client;
/* ACL information */
typedef struct aclInfo {
long long user_auth_failures; /* Auth failure counts on user level */
long long invalid_cmd_accesses; /* Invalid command accesses that user doesn't have permission to */
long long invalid_key_accesses; /* Invalid key accesses that user doesn't have permission to */
long long invalid_channel_accesses; /* Invalid channel accesses that user doesn't have permission to */
} aclInfo;
struct saveparam {
time_t seconds;
int changes;
};
struct moduleLoadQueueEntry {
sds path;
int argc;
robj **argv;
};
struct sentinelLoadQueueEntry {
int argc;
sds *argv;
int linenum;
sds line;
};
struct sentinelConfig {
list *pre_monitor_cfg;
list *monitor_cfg;
list *post_monitor_cfg;
};
struct sharedObjectsStruct {
robj *ok, *err, *emptybulk, *czero, *cone, *pong, *space,
*queued, *null[4], *nullarray[4], *emptymap[4], *emptyset[4],
*emptyarray, *wrongtypeerr, *nokeyerr, *syntaxerr, *sameobjecterr,
*outofrangeerr, *noscripterr, *loadingerr,
*slowevalerr, *slowscripterr, *slowmoduleerr, *bgsaveerr,
*masterdownerr, *roslaveerr, *execaborterr, *noautherr, *noreplicaserr,
*busykeyerr, *oomerr, *plus, *messagebulk, *pmessagebulk, *subscribebulk,
*unsubscribebulk, *psubscribebulk, *punsubscribebulk, *del, *unlink,
*rpop, *lpop, *lpush, *rpoplpush, *lmove, *blmove, *zpopmin, *zpopmax,
*emptyscan, *multi, *exec, *left, *right, *hset, *srem, *xgroup, *xclaim,
*script, *replconf, *eval, *persist, *set, *pexpireat, *pexpire,
*time, *pxat, *absttl, *retrycount, *force, *justid, *entriesread,
*lastid, *ping, *setid, *keepttl, *load, *createconsumer,
*getack, *special_asterick, *special_equals, *default_username, *redacted,
*ssubscribebulk,*sunsubscribebulk, *smessagebulk,
*select[PROTO_SHARED_SELECT_CMDS],
*integers[OBJ_SHARED_INTEGERS],
*mbulkhdr[OBJ_SHARED_BULKHDR_LEN], /* "*<value>\r\n" */
*bulkhdr[OBJ_SHARED_BULKHDR_LEN], /* "$<value>\r\n" */
*maphdr[OBJ_SHARED_BULKHDR_LEN], /* "%<value>\r\n" */
*sethdr[OBJ_SHARED_BULKHDR_LEN]; /* "~<value>\r\n" */
sds minstring, maxstring;
};
/* ZSETs use a specialized version of Skiplists */
typedef struct zskiplistNode {
sds ele;
double score;
struct zskiplistNode *backward;
struct zskiplistLevel {
struct zskiplistNode *forward;
unsigned long span;
} level[];
} zskiplistNode;
typedef struct zskiplist {
struct zskiplistNode *header, *tail;
unsigned long length;
int level;
} zskiplist;
typedef struct zset {
dict *dict;
zskiplist *zsl;
} zset;
typedef struct clientBufferLimitsConfig {
unsigned long long hard_limit_bytes;
unsigned long long soft_limit_bytes;
time_t soft_limit_seconds;
} clientBufferLimitsConfig;
extern clientBufferLimitsConfig clientBufferLimitsDefaults[CLIENT_TYPE_OBUF_COUNT];
/* The redisOp structure defines a Redis Operation, that is an instance of
* a command with an argument vector, database ID, propagation target
* (PROPAGATE_*), and command pointer.
*
* Currently only used to additionally propagate more commands to AOF/Replication
* after the propagation of the executed command. */
typedef struct redisOp {
robj **argv;
int argc, dbid, target;
} redisOp;
/* Defines an array of Redis operations. There is an API to add to this
* structure in an easy way.
*
* int redisOpArrayAppend(redisOpArray *oa, int dbid, robj **argv, int argc, int target);
* void redisOpArrayFree(redisOpArray *oa);
*/
typedef struct redisOpArray {
redisOp *ops;
int numops;
int capacity;
} redisOpArray;
/* This structure is returned by the getMemoryOverheadData() function in
* order to return memory overhead information. */
struct redisMemOverhead {
size_t peak_allocated;
size_t total_allocated;
size_t startup_allocated;
size_t repl_backlog;
size_t clients_slaves;
size_t clients_normal;
size_t cluster_links;
size_t aof_buffer;
size_t lua_caches;
size_t functions_caches;
size_t overhead_total;
size_t dataset;
size_t total_keys;
size_t bytes_per_key;
float dataset_perc;
float peak_perc;
float total_frag;
ssize_t total_frag_bytes;
float allocator_frag;
ssize_t allocator_frag_bytes;
float allocator_rss;
ssize_t allocator_rss_bytes;
float rss_extra;
size_t rss_extra_bytes;
size_t num_dbs;
size_t overhead_db_hashtable_lut;
size_t overhead_db_hashtable_rehashing;
unsigned long db_dict_rehashing_count;
struct {
size_t dbid;
size_t overhead_ht_main;
size_t overhead_ht_expires;
} *db;
};
/* Replication error behavior determines the replica behavior
* when it receives an error over the replication stream. In
* either case the error is logged. */
typedef enum {
PROPAGATION_ERR_BEHAVIOR_IGNORE = 0,
PROPAGATION_ERR_BEHAVIOR_PANIC,
PROPAGATION_ERR_BEHAVIOR_PANIC_ON_REPLICAS
} replicationErrorBehavior;
/* This structure can be optionally passed to RDB save/load functions in
* order to implement additional functionalities, by storing and loading
* metadata to the RDB file.
*
* For example, to use select a DB at load time, useful in
* replication in order to make sure that chained slaves (slaves of slaves)
* select the correct DB and are able to accept the stream coming from the
* top-level master. */
typedef struct rdbSaveInfo {
/* Used saving and loading. */
int repl_stream_db; /* DB to select in server.master client. */
/* Used only loading. */
int repl_id_is_set; /* True if repl_id field is set. */
char repl_id[CONFIG_RUN_ID_SIZE+1]; /* Replication ID. */
long long repl_offset; /* Replication offset. */
} rdbSaveInfo;
#define RDB_SAVE_INFO_INIT {-1,0,"0000000000000000000000000000000000000000",-1}
struct malloc_stats {
size_t zmalloc_used;
size_t process_rss;
size_t allocator_allocated;
size_t allocator_active;
size_t allocator_resident;
size_t allocator_muzzy;
size_t allocator_frag_smallbins_bytes;
};
/*-----------------------------------------------------------------------------
* TLS Context Configuration
*----------------------------------------------------------------------------*/
typedef struct redisTLSContextConfig {
char *cert_file; /* Server side and optionally client side cert file name */
char *key_file; /* Private key filename for cert_file */
char *key_file_pass; /* Optional password for key_file */
char *client_cert_file; /* Certificate to use as a client; if none, use cert_file */
char *client_key_file; /* Private key filename for client_cert_file */
char *client_key_file_pass; /* Optional password for client_key_file */
char *dh_params_file;
char *ca_cert_file;
char *ca_cert_dir;
char *protocols;
char *ciphers;
char *ciphersuites;
int prefer_server_ciphers;
int session_caching;
int session_cache_size;
int session_cache_timeout;
} redisTLSContextConfig;
/*-----------------------------------------------------------------------------
* AOF manifest definition
*----------------------------------------------------------------------------*/
typedef enum {
AOF_FILE_TYPE_BASE = 'b', /* BASE file */
AOF_FILE_TYPE_HIST = 'h', /* HISTORY file */
AOF_FILE_TYPE_INCR = 'i', /* INCR file */
} aof_file_type;
typedef struct {
sds file_name; /* file name */
long long file_seq; /* file sequence */
aof_file_type file_type; /* file type */
} aofInfo;
typedef struct {
aofInfo *base_aof_info; /* BASE file information. NULL if there is no BASE file. */
list *incr_aof_list; /* INCR AOFs list. We may have multiple INCR AOF when rewrite fails. */
list *history_aof_list; /* HISTORY AOF list. When the AOFRW success, The aofInfo contained in
`base_aof_info` and `incr_aof_list` will be moved to this list. We
will delete these AOF files when AOFRW finish. */
long long curr_base_file_seq; /* The sequence number used by the current BASE file. */
long long curr_incr_file_seq; /* The sequence number used by the current INCR file. */
int dirty; /* 1 Indicates that the aofManifest in the memory is inconsistent with
disk, we need to persist it immediately. */
} aofManifest;
/*-----------------------------------------------------------------------------
* Global server state
*----------------------------------------------------------------------------*/
/* AIX defines hz to __hz, we don't use this define and in order to allow
* Redis build on AIX we need to undef it. */
#ifdef _AIX
#undef hz
#endif
#define CHILD_TYPE_NONE 0
#define CHILD_TYPE_RDB 1
#define CHILD_TYPE_AOF 2
#define CHILD_TYPE_LDB 3
#define CHILD_TYPE_MODULE 4
typedef enum childInfoType {
CHILD_INFO_TYPE_CURRENT_INFO,
CHILD_INFO_TYPE_AOF_COW_SIZE,
CHILD_INFO_TYPE_RDB_COW_SIZE,
CHILD_INFO_TYPE_MODULE_COW_SIZE
} childInfoType;
struct redisServer {
/* General */
pid_t pid; /* Main process pid. */
pthread_t main_thread_id; /* Main thread id */
char *configfile; /* Absolute config file path, or NULL */
char *executable; /* Absolute executable file path. */
char **exec_argv; /* Executable argv vector (copy). */
int dynamic_hz; /* Change hz value depending on # of clients. */
int config_hz; /* Configured HZ value. May be different than
the actual 'hz' field value if dynamic-hz
is enabled. */
mode_t umask; /* The umask value of the process on startup */
int hz; /* serverCron() calls frequency in hertz */
int in_fork_child; /* indication that this is a fork child */
redisDb *db;
dict *commands; /* Command table */
dict *orig_commands; /* Command table before command renaming. */
aeEventLoop *el;
rax *errors; /* Errors table */
int errors_enabled; /* If true, errorstats is enabled, and we will add new errors. */
unsigned int lruclock; /* Clock for LRU eviction */
volatile sig_atomic_t shutdown_asap; /* Shutdown ordered by signal handler. */
mstime_t shutdown_mstime; /* Timestamp to limit graceful shutdown. */
int last_sig_received; /* Indicates the last SIGNAL received, if any (e.g., SIGINT or SIGTERM). */
int shutdown_flags; /* Flags passed to prepareForShutdown(). */
int activerehashing; /* Incremental rehash in serverCron() */
int active_defrag_running; /* Active defragmentation running (holds current scan aggressiveness) */
char *pidfile; /* PID file path */
int arch_bits; /* 32 or 64 depending on sizeof(long) */
int cronloops; /* Number of times the cron function run */
char runid[CONFIG_RUN_ID_SIZE+1]; /* ID always different at every exec. */
int sentinel_mode; /* True if this instance is a Sentinel. */
size_t initial_memory_usage; /* Bytes used after initialization. */
int always_show_logo; /* Show logo even for non-stdout logging. */
int in_exec; /* Are we inside EXEC? */
int busy_module_yield_flags; /* Are we inside a busy module? (triggered by RM_Yield). see BUSY_MODULE_YIELD_ flags. */
const char *busy_module_yield_reply; /* When non-null, we are inside RM_Yield. */
char *ignore_warnings; /* Config: warnings that should be ignored. */
int client_pause_in_transaction; /* Was a client pause executed during this Exec? */
int thp_enabled; /* If true, THP is enabled. */
size_t page_size; /* The page size of OS. */
/* Modules */
dict *moduleapi; /* Exported core APIs dictionary for modules. */
dict *sharedapi; /* Like moduleapi but containing the APIs that
modules share with each other. */
dict *module_configs_queue; /* Dict that stores module configurations from .conf file until after modules are loaded during startup or arguments to loadex. */
list *loadmodule_queue; /* List of modules to load at startup. */
int module_pipe[2]; /* Pipe used to awake the event loop by module threads. */
pid_t child_pid; /* PID of current child */
int child_type; /* Type of current child */
redisAtomic int module_gil_acquring; /* Indicates whether the GIL is being acquiring by the main thread. */
/* Networking */
int port; /* TCP listening port */
int tls_port; /* TLS listening port */
int tcp_backlog; /* TCP listen() backlog */
char *bindaddr[CONFIG_BINDADDR_MAX]; /* Addresses we should bind to */
int bindaddr_count; /* Number of addresses in server.bindaddr[] */
char *bind_source_addr; /* Source address to bind on for outgoing connections */
char *unixsocket; /* UNIX socket path */
unsigned int unixsocketperm; /* UNIX socket permission (see mode_t) */
connListener listeners[CONN_TYPE_MAX]; /* TCP/Unix/TLS even more types */
uint32_t socket_mark_id; /* ID for listen socket marking */
connListener clistener; /* Cluster bus listener */
list *clients; /* List of active clients */
list *clients_to_close; /* Clients to close asynchronously */
list *clients_pending_write; /* There is to write or install handler. */
list *clients_pending_read; /* Client has pending read socket buffers. */
list *slaves, *monitors; /* List of slaves and MONITORs */
client *current_client; /* The client that triggered the command execution (External or AOF). */
client *executing_client; /* The client executing the current command (possibly script or module). */
#ifdef LOG_REQ_RES
char *req_res_logfile; /* Path of log file for logging all requests and their replies. If NULL, no logging will be performed */
unsigned int client_default_resp;
#endif
/* Stuff for client mem eviction */
clientMemUsageBucket* client_mem_usage_buckets;
rax *clients_timeout_table; /* Radix tree for blocked clients timeouts. */
int execution_nesting; /* Execution nesting level.
* e.g. call(), async module stuff (timers, events, etc.),
* cron stuff (active expire, eviction) */
rax *clients_index; /* Active clients dictionary by client ID. */
uint32_t paused_actions; /* Bitmask of actions that are currently paused */
list *postponed_clients; /* List of postponed clients */
pause_event client_pause_per_purpose[NUM_PAUSE_PURPOSES];
char neterr[ANET_ERR_LEN]; /* Error buffer for anet.c */
dict *migrate_cached_sockets;/* MIGRATE cached sockets */
redisAtomic uint64_t next_client_id; /* Next client unique ID. Incremental. */
int protected_mode; /* Don't accept external connections. */
int io_threads_num; /* Number of IO threads to use. */
int io_threads_do_reads; /* Read and parse from IO threads? */
int io_threads_active; /* Is IO threads currently active? */
long long events_processed_while_blocked; /* processEventsWhileBlocked() */
int enable_protected_configs; /* Enable the modification of protected configs, see PROTECTED_ACTION_ALLOWED_* */
int enable_debug_cmd; /* Enable DEBUG commands, see PROTECTED_ACTION_ALLOWED_* */
int enable_module_cmd; /* Enable MODULE commands, see PROTECTED_ACTION_ALLOWED_* */
/* RDB / AOF loading information */
volatile sig_atomic_t loading; /* We are loading data from disk if true */
volatile sig_atomic_t async_loading; /* We are loading data without blocking the db being served */
off_t loading_total_bytes;
off_t loading_rdb_used_mem;
off_t loading_loaded_bytes;
time_t loading_start_time;
off_t loading_process_events_interval_bytes;
/* Fields used only for stats */
time_t stat_starttime; /* Server start time */
long long stat_numcommands; /* Number of processed commands */
long long stat_numconnections; /* Number of connections received */
long long stat_expiredkeys; /* Number of expired keys */
double stat_expired_stale_perc; /* Percentage of keys probably expired */
long long stat_expired_time_cap_reached_count; /* Early expire cycle stops.*/
long long stat_expire_cycle_time_used; /* Cumulative microseconds used. */
long long stat_evictedkeys; /* Number of evicted keys (maxmemory) */
long long stat_evictedclients; /* Number of evicted clients */
long long stat_evictedscripts; /* Number of evicted lua scripts. */
long long stat_total_eviction_exceeded_time; /* Total time over the memory limit, unit us */
monotime stat_last_eviction_exceeded_time; /* Timestamp of current eviction start, unit us */
long long stat_keyspace_hits; /* Number of successful lookups of keys */
long long stat_keyspace_misses; /* Number of failed lookups of keys */
long long stat_active_defrag_hits; /* number of allocations moved */
long long stat_active_defrag_misses; /* number of allocations scanned but not moved */
long long stat_active_defrag_key_hits; /* number of keys with moved allocations */
long long stat_active_defrag_key_misses;/* number of keys scanned and not moved */
long long stat_active_defrag_scanned; /* number of dictEntries scanned */
long long stat_total_active_defrag_time; /* Total time memory fragmentation over the limit, unit us */
monotime stat_last_active_defrag_time; /* Timestamp of current active defrag start */
size_t stat_peak_memory; /* Max used memory record */
long long stat_aof_rewrites; /* number of aof file rewrites performed */
long long stat_aofrw_consecutive_failures; /* The number of consecutive failures of aofrw */
long long stat_rdb_saves; /* number of rdb saves performed */
long long stat_fork_time; /* Time needed to perform latest fork() */
double stat_fork_rate; /* Fork rate in GB/sec. */
long long stat_total_forks; /* Total count of fork. */
long long stat_rejected_conn; /* Clients rejected because of maxclients */
long long stat_sync_full; /* Number of full resyncs with slaves. */
long long stat_sync_partial_ok; /* Number of accepted PSYNC requests. */
long long stat_sync_partial_err;/* Number of unaccepted PSYNC requests. */
list *slowlog; /* SLOWLOG list of commands */
long long slowlog_entry_id; /* SLOWLOG current entry ID */
long long slowlog_log_slower_than; /* SLOWLOG time limit (to get logged) */
unsigned long slowlog_max_len; /* SLOWLOG max number of items logged */
struct malloc_stats cron_malloc_stats; /* sampled in serverCron(). */
redisAtomic long long stat_net_input_bytes; /* Bytes read from network. */
redisAtomic long long stat_net_output_bytes; /* Bytes written to network. */
redisAtomic long long stat_net_repl_input_bytes; /* Bytes read during replication, added to stat_net_input_bytes in 'info'. */
redisAtomic long long stat_net_repl_output_bytes; /* Bytes written during replication, added to stat_net_output_bytes in 'info'. */
size_t stat_current_cow_peak; /* Peak size of copy on write bytes. */
size_t stat_current_cow_bytes; /* Copy on write bytes while child is active. */
monotime stat_current_cow_updated; /* Last update time of stat_current_cow_bytes */
size_t stat_current_save_keys_processed; /* Processed keys while child is active. */
size_t stat_current_save_keys_total; /* Number of keys when child started. */
size_t stat_rdb_cow_bytes; /* Copy on write bytes during RDB saving. */
size_t stat_aof_cow_bytes; /* Copy on write bytes during AOF rewrite. */
size_t stat_module_cow_bytes; /* Copy on write bytes during module fork. */
double stat_module_progress; /* Module save progress. */
size_t stat_clients_type_memory[CLIENT_TYPE_COUNT];/* Mem usage by type */
size_t stat_cluster_links_memory; /* Mem usage by cluster links */
long long stat_unexpected_error_replies; /* Number of unexpected (aof-loading, replica to master, etc.) error replies */
long long stat_total_error_replies; /* Total number of issued error replies ( command + rejected errors ) */
long long stat_dump_payload_sanitizations; /* Number deep dump payloads integrity validations. */
long long stat_io_reads_processed; /* Number of read events processed by IO / Main threads */
long long stat_io_writes_processed; /* Number of write events processed by IO / Main threads */
redisAtomic long long stat_total_reads_processed; /* Total number of read events processed */
redisAtomic long long stat_total_writes_processed; /* Total number of write events processed */
redisAtomic long long stat_client_qbuf_limit_disconnections; /* Total number of clients reached query buf length limit */
long long stat_client_outbuf_limit_disconnections; /* Total number of clients reached output buf length limit */
/* The following two are used to track instantaneous metrics, like
* number of operations per second, network traffic. */
struct {
long long last_sample_base; /* The divisor of last sample window */
long long last_sample_value; /* The dividend of last sample window */
long long samples[STATS_METRIC_SAMPLES];
int idx;
} inst_metric[STATS_METRIC_COUNT];
long long stat_reply_buffer_shrinks; /* Total number of output buffer shrinks */
long long stat_reply_buffer_expands; /* Total number of output buffer expands */
monotime el_start;
/* The following two are used to record the max number of commands executed in one eventloop.
* Note that commands in transactions are also counted. */
long long el_cmd_cnt_start;
long long el_cmd_cnt_max;
/* The sum of active-expire, active-defrag and all other tasks done by cron and beforeSleep,
but excluding read, write and AOF, which are counted by other sets of metrics. */
monotime el_cron_duration;
durationStats duration_stats[EL_DURATION_TYPE_NUM];
/* Configuration */
int verbosity; /* Loglevel in redis.conf */
int maxidletime; /* Client timeout in seconds */
int tcpkeepalive; /* Set SO_KEEPALIVE if non-zero. */
int active_expire_enabled; /* Can be disabled for testing purposes. */
int active_expire_effort; /* From 1 (default) to 10, active effort. */
int lazy_expire_disabled; /* If > 0, don't trigger lazy expire */
int active_defrag_enabled;
int sanitize_dump_payload; /* Enables deep sanitization for ziplist and listpack in RDB and RESTORE. */
int skip_checksum_validation; /* Disable checksum validation for RDB and RESTORE payload. */
int jemalloc_bg_thread; /* Enable jemalloc background thread */
int active_defrag_configuration_changed; /* defrag configuration has been changed and need to reconsider
* active_defrag_running in computeDefragCycles. */
size_t active_defrag_ignore_bytes; /* minimum amount of fragmentation waste to start active defrag */
int active_defrag_threshold_lower; /* minimum percentage of fragmentation to start active defrag */
int active_defrag_threshold_upper; /* maximum percentage of fragmentation at which we use maximum effort */
int active_defrag_cycle_min; /* minimal effort for defrag in CPU percentage */
int active_defrag_cycle_max; /* maximal effort for defrag in CPU percentage */
unsigned long active_defrag_max_scan_fields; /* maximum number of fields of set/hash/zset/list to process from within the main dict scan */
size_t client_max_querybuf_len; /* Limit for client query buffer length */
int dbnum; /* Total number of configured DBs */
int supervised; /* 1 if supervised, 0 otherwise. */
int supervised_mode; /* See SUPERVISED_* */
int daemonize; /* True if running as a daemon */
int set_proc_title; /* True if change proc title */
char *proc_title_template; /* Process title template format */
clientBufferLimitsConfig client_obuf_limits[CLIENT_TYPE_OBUF_COUNT];
int pause_cron; /* Don't run cron tasks (debug) */
int dict_resizing; /* Whether to allow main dict and expired dict to be resized (debug) */
int latency_tracking_enabled; /* 1 if extended latency tracking is enabled, 0 otherwise. */
double *latency_tracking_info_percentiles; /* Extended latency tracking info output percentile list configuration. */
int latency_tracking_info_percentiles_len;
unsigned int max_new_tls_conns_per_cycle; /* The maximum number of tls connections that will be accepted during each invocation of the event loop. */
unsigned int max_new_conns_per_cycle; /* The maximum number of tcp connections that will be accepted during each invocation of the event loop. */
/* AOF persistence */
int aof_enabled; /* AOF configuration */
int aof_state; /* AOF_(ON|OFF|WAIT_REWRITE) */
int aof_fsync; /* Kind of fsync() policy */
char *aof_filename; /* Basename of the AOF file and manifest file */
char *aof_dirname; /* Name of the AOF directory */
int aof_no_fsync_on_rewrite; /* Don't fsync if a rewrite is in prog. */
int aof_rewrite_perc; /* Rewrite AOF if % growth is > M and... */
off_t aof_rewrite_min_size; /* the AOF file is at least N bytes. */
off_t aof_rewrite_base_size; /* AOF size on latest startup or rewrite. */
off_t aof_current_size; /* AOF current size (Including BASE + INCRs). */
off_t aof_last_incr_size; /* The size of the latest incr AOF. */
off_t aof_last_incr_fsync_offset; /* AOF offset which is already requested to be synced to disk.
* Compare with the aof_last_incr_size. */
int aof_flush_sleep; /* Micros to sleep before flush. (used by tests) */
int aof_rewrite_scheduled; /* Rewrite once BGSAVE terminates. */
sds aof_buf; /* AOF buffer, written before entering the event loop */
int aof_fd; /* File descriptor of currently selected AOF file */
int aof_selected_db; /* Currently selected DB in AOF */
mstime_t aof_flush_postponed_start; /* mstime of postponed AOF flush */
mstime_t aof_last_fsync; /* mstime of last fsync() */
time_t aof_rewrite_time_last; /* Time used by last AOF rewrite run. */
time_t aof_rewrite_time_start; /* Current AOF rewrite start time. */
time_t aof_cur_timestamp; /* Current record timestamp in AOF */
int aof_timestamp_enabled; /* Enable record timestamp in AOF */
int aof_lastbgrewrite_status; /* C_OK or C_ERR */
unsigned long aof_delayed_fsync; /* delayed AOF fsync() counter */
int aof_rewrite_incremental_fsync;/* fsync incrementally while aof rewriting? */
int rdb_save_incremental_fsync; /* fsync incrementally while rdb saving? */
int aof_last_write_status; /* C_OK or C_ERR */
int aof_last_write_errno; /* Valid if aof write/fsync status is ERR */
int aof_load_truncated; /* Don't stop on unexpected AOF EOF. */
int aof_use_rdb_preamble; /* Specify base AOF to use RDB encoding on AOF rewrites. */
redisAtomic int aof_bio_fsync_status; /* Status of AOF fsync in bio job. */
redisAtomic int aof_bio_fsync_errno; /* Errno of AOF fsync in bio job. */
aofManifest *aof_manifest; /* Used to track AOFs. */
int aof_disable_auto_gc; /* If disable automatically deleting HISTORY type AOFs?
default no. (for testings). */
/* RDB persistence */
long long dirty; /* Changes to DB from the last save */
long long dirty_before_bgsave; /* Used to restore dirty on failed BGSAVE */
long long rdb_last_load_keys_expired; /* number of expired keys when loading RDB */
long long rdb_last_load_keys_loaded; /* number of loaded keys when loading RDB */
struct saveparam *saveparams; /* Save points array for RDB */
int saveparamslen; /* Number of saving points */
char *rdb_filename; /* Name of RDB file */
int rdb_compression; /* Use compression in RDB? */
int rdb_checksum; /* Use RDB checksum? */
int rdb_del_sync_files; /* Remove RDB files used only for SYNC if
the instance does not use persistence. */
time_t lastsave; /* Unix time of last successful save */
time_t lastbgsave_try; /* Unix time of last attempted bgsave */
time_t rdb_save_time_last; /* Time used by last RDB save run. */
time_t rdb_save_time_start; /* Current RDB save start time. */
int rdb_bgsave_scheduled; /* BGSAVE when possible if true. */
int rdb_child_type; /* Type of save by active child. */
int lastbgsave_status; /* C_OK or C_ERR */
int stop_writes_on_bgsave_err; /* Don't allow writes if can't BGSAVE */
int rdb_pipe_read; /* RDB pipe used to transfer the rdb data */
/* to the parent process in diskless repl. */
int rdb_child_exit_pipe; /* Used by the diskless parent allow child exit. */
connection **rdb_pipe_conns; /* Connections which are currently the */
int rdb_pipe_numconns; /* target of diskless rdb fork child. */
int rdb_pipe_numconns_writing; /* Number of rdb conns with pending writes. */
char *rdb_pipe_buff; /* In diskless replication, this buffer holds data */
int rdb_pipe_bufflen; /* that was read from the rdb pipe. */
int rdb_key_save_delay; /* Delay in microseconds between keys while
* writing aof or rdb. (for testings). negative
* value means fractions of microseconds (on average). */
int key_load_delay; /* Delay in microseconds between keys while
* loading aof or rdb. (for testings). negative
* value means fractions of microseconds (on average). */
/* Pipe and data structures for child -> parent info sharing. */
int child_info_pipe[2]; /* Pipe used to write the child_info_data. */
int child_info_nread; /* Num of bytes of the last read from pipe */
/* Propagation of commands in AOF / replication */
redisOpArray also_propagate; /* Additional command to propagate. */
int replication_allowed; /* Are we allowed to replicate? */
/* Logging */
char *logfile; /* Path of log file */
int syslog_enabled; /* Is syslog enabled? */
char *syslog_ident; /* Syslog ident */
int syslog_facility; /* Syslog facility */
int crashlog_enabled; /* Enable signal handler for crashlog.
* disable for clean core dumps. */
int memcheck_enabled; /* Enable memory check on crash. */
int use_exit_on_panic; /* Use exit() on panic and assert rather than
* abort(). useful for Valgrind. */
/* Shutdown */
int shutdown_timeout; /* Graceful shutdown time limit in seconds. */
int shutdown_on_sigint; /* Shutdown flags configured for SIGINT. */
int shutdown_on_sigterm; /* Shutdown flags configured for SIGTERM. */
/* Replication (master) */
char replid[CONFIG_RUN_ID_SIZE+1]; /* My current replication ID. */
char replid2[CONFIG_RUN_ID_SIZE+1]; /* replid inherited from master*/
long long master_repl_offset; /* My current replication offset */
long long second_replid_offset; /* Accept offsets up to this for replid2. */
redisAtomic long long fsynced_reploff_pending;/* Largest replication offset to
* potentially have been fsynced, applied to
fsynced_reploff only when AOF state is AOF_ON
(not during the initial rewrite) */
long long fsynced_reploff; /* Largest replication offset that has been confirmed to be fsynced */
int slaveseldb; /* Last SELECTed DB in replication output */
int repl_ping_slave_period; /* Master pings the slave every N seconds */
replBacklog *repl_backlog; /* Replication backlog for partial syncs */
long long repl_backlog_size; /* Backlog circular buffer size */
time_t repl_backlog_time_limit; /* Time without slaves after the backlog
gets released. */
time_t repl_no_slaves_since; /* We have no slaves since that time.
Only valid if server.slaves len is 0. */
int repl_min_slaves_to_write; /* Min number of slaves to write. */
int repl_min_slaves_max_lag; /* Max lag of <count> slaves to write. */
int repl_good_slaves_count; /* Number of slaves with lag <= max_lag. */
int repl_diskless_sync; /* Master send RDB to slaves sockets directly. */
int repl_diskless_load; /* Slave parse RDB directly from the socket.
* see REPL_DISKLESS_LOAD_* enum */
int repl_diskless_sync_delay; /* Delay to start a diskless repl BGSAVE. */
int repl_diskless_sync_max_replicas;/* Max replicas for diskless repl BGSAVE
* delay (start sooner if they all connect). */
size_t repl_buffer_mem; /* The memory of replication buffer. */
list *repl_buffer_blocks; /* Replication buffers blocks list
* (serving replica clients and repl backlog) */
/* Replication (slave) */
char *masteruser; /* AUTH with this user and masterauth with master */
sds masterauth; /* AUTH with this password with master */
char *masterhost; /* Hostname of master */
int masterport; /* Port of master */
int repl_timeout; /* Timeout after N seconds of master idle */
client *master; /* Client that is master for this slave */
client *cached_master; /* Cached master to be reused for PSYNC. */
int repl_syncio_timeout; /* Timeout for synchronous I/O calls */
int repl_state; /* Replication status if the instance is a slave */
off_t repl_transfer_size; /* Size of RDB to read from master during sync. */
off_t repl_transfer_read; /* Amount of RDB read from master during sync. */
off_t repl_transfer_last_fsync_off; /* Offset when we fsync-ed last time. */
connection *repl_transfer_s; /* Slave -> Master SYNC connection */
int repl_transfer_fd; /* Slave -> Master SYNC temp file descriptor */
char *repl_transfer_tmpfile; /* Slave-> master SYNC temp file name */
time_t repl_transfer_lastio; /* Unix time of the latest read, for timeout */
int repl_serve_stale_data; /* Serve stale data when link is down? */
int repl_slave_ro; /* Slave is read only? */
int repl_slave_ignore_maxmemory; /* If true slaves do not evict. */
time_t repl_down_since; /* Unix time at which link with master went down */
int repl_disable_tcp_nodelay; /* Disable TCP_NODELAY after SYNC? */
int slave_priority; /* Reported in INFO and used by Sentinel. */
int replica_announced; /* If true, replica is announced by Sentinel */
int slave_announce_port; /* Give the master this listening port. */
char *slave_announce_ip; /* Give the master this ip address. */
int propagation_error_behavior; /* Configures the behavior of the replica
* when it receives an error on the replication stream */
int repl_ignore_disk_write_error; /* Configures whether replicas panic when unable to
* persist writes to AOF. */
/* The following two fields is where we store master PSYNC replid/offset
* while the PSYNC is in progress. At the end we'll copy the fields into
* the server->master client structure. */
char master_replid[CONFIG_RUN_ID_SIZE+1]; /* Master PSYNC runid. */
long long master_initial_offset; /* Master PSYNC offset. */
int repl_slave_lazy_flush; /* Lazy FLUSHALL before loading DB? */
/* Synchronous replication. */
list *clients_waiting_acks; /* Clients waiting in WAIT or WAITAOF. */
int get_ack_from_slaves; /* If true we send REPLCONF GETACK. */
/* Limits */
unsigned int maxclients; /* Max number of simultaneous clients */
unsigned long long maxmemory; /* Max number of memory bytes to use */
ssize_t maxmemory_clients; /* Memory limit for total client buffers */
int maxmemory_policy; /* Policy for key eviction */
int maxmemory_samples; /* Precision of random sampling */
int maxmemory_eviction_tenacity;/* Aggressiveness of eviction processing */
int lfu_log_factor; /* LFU logarithmic counter factor. */
int lfu_decay_time; /* LFU counter decay factor. */
long long proto_max_bulk_len; /* Protocol bulk length maximum size. */
int oom_score_adj_values[CONFIG_OOM_COUNT]; /* Linux oom_score_adj configuration */
int oom_score_adj; /* If true, oom_score_adj is managed */
int disable_thp; /* If true, disable THP by syscall */
/* Blocked clients */
unsigned int blocked_clients; /* # of clients executing a blocking cmd.*/
unsigned int blocked_clients_by_type[BLOCKED_NUM];
list *unblocked_clients; /* list of clients to unblock before next loop */
list *ready_keys; /* List of readyList structures for BLPOP & co */
/* Client side caching. */
unsigned int tracking_clients; /* # of clients with tracking enabled.*/
size_t tracking_table_max_keys; /* Max number of keys in tracking table. */
list *tracking_pending_keys; /* tracking invalidation keys pending to flush */
list *pending_push_messages; /* pending publish or other push messages to flush */
/* Sort parameters - qsort_r() is only available under BSD so we
* have to take this state global, in order to pass it to sortCompare() */
int sort_desc;
int sort_alpha;
int sort_bypattern;
int sort_store;
/* Zip structure config, see redis.conf for more information */
size_t hash_max_listpack_entries;
size_t hash_max_listpack_value;
size_t set_max_intset_entries;
size_t set_max_listpack_entries;
size_t set_max_listpack_value;
size_t zset_max_listpack_entries;
size_t zset_max_listpack_value;
size_t hll_sparse_max_bytes;
size_t stream_node_max_bytes;
long long stream_node_max_entries;
/* List parameters */
int list_max_listpack_size;
int list_compress_depth;
/* time cache */
redisAtomic time_t unixtime; /* Unix time sampled every cron cycle. */
time_t timezone; /* Cached timezone. As set by tzset(). */
int daylight_active; /* Currently in daylight saving time. */
mstime_t mstime; /* 'unixtime' in milliseconds. */
ustime_t ustime; /* 'unixtime' in microseconds. */
mstime_t cmd_time_snapshot; /* Time snapshot of the root execution nesting. */
size_t blocking_op_nesting; /* Nesting level of blocking operation, used to reset blocked_last_cron. */
long long blocked_last_cron; /* Indicate the mstime of the last time we did cron jobs from a blocking operation */
/* Pubsub */
kvstore *pubsub_channels; /* Map channels to list of subscribed clients */
dict *pubsub_patterns; /* A dict of pubsub_patterns */
int notify_keyspace_events; /* Events to propagate via Pub/Sub. This is an
xor of NOTIFY_... flags. */
kvstore *pubsubshard_channels; /* Map shard channels in every slot to list of subscribed clients */
unsigned int pubsub_clients; /* # of clients in Pub/Sub mode */
unsigned int watching_clients; /* # of clients are wathcing keys */
/* Cluster */
int cluster_enabled; /* Is cluster enabled? */
int cluster_port; /* Set the cluster port for a node. */
mstime_t cluster_node_timeout; /* Cluster node timeout. */
mstime_t cluster_ping_interval; /* A debug configuration for setting how often cluster nodes send ping messages. */
char *cluster_configfile; /* Cluster auto-generated config file name. */
struct clusterState *cluster; /* State of the cluster */
int cluster_migration_barrier; /* Cluster replicas migration barrier. */
int cluster_allow_replica_migration; /* Automatic replica migrations to orphaned masters and from empty masters */
int cluster_slave_validity_factor; /* Slave max data age for failover. */
int cluster_require_full_coverage; /* If true, put the cluster down if
there is at least an uncovered slot.*/
int cluster_slave_no_failover; /* Prevent slave from starting a failover
if the master is in failure state. */
char *cluster_announce_ip; /* IP address to announce on cluster bus. */
char *cluster_announce_hostname; /* hostname to announce on cluster bus. */
char *cluster_announce_human_nodename; /* Human readable node name assigned to a node. */
int cluster_preferred_endpoint_type; /* Use the announced hostname when available. */
int cluster_announce_port; /* base port to announce on cluster bus. */
int cluster_announce_tls_port; /* TLS port to announce on cluster bus. */
int cluster_announce_bus_port; /* bus port to announce on cluster bus. */
int cluster_module_flags; /* Set of flags that Redis modules are able
to set in order to suppress certain
native Redis Cluster features. Check the
REDISMODULE_CLUSTER_FLAG_*. */
int cluster_allow_reads_when_down; /* Are reads allowed when the cluster
is down? */
int cluster_config_file_lock_fd; /* cluster config fd, will be flocked. */
unsigned long long cluster_link_msg_queue_limit_bytes; /* Memory usage limit on individual link msg queue */
int cluster_drop_packet_filter; /* Debug config that allows tactically
* dropping packets of a specific type */
/* Scripting */
mstime_t busy_reply_threshold; /* Script / module timeout in milliseconds */
int pre_command_oom_state; /* OOM before command (script?) was started */
int script_disable_deny_script; /* Allow running commands marked "noscript" inside a script. */
/* Lazy free */
int lazyfree_lazy_eviction;
int lazyfree_lazy_expire;
int lazyfree_lazy_server_del;
int lazyfree_lazy_user_del;
int lazyfree_lazy_user_flush;
/* Latency monitor */
long long latency_monitor_threshold;
dict *latency_events;
/* ACLs */
char *acl_filename; /* ACL Users file. NULL if not configured. */
unsigned long acllog_max_len; /* Maximum length of the ACL LOG list. */
sds requirepass; /* Remember the cleartext password set with
the old "requirepass" directive for
backward compatibility with Redis <= 5. */
int acl_pubsub_default; /* Default ACL pub/sub channels flag */
aclInfo acl_info; /* ACL info */
/* Assert & bug reporting */
int watchdog_period; /* Software watchdog period in ms. 0 = off */
/* System hardware info */
size_t system_memory_size; /* Total memory in system as reported by OS */
/* TLS Configuration */
int tls_cluster;
int tls_replication;
int tls_auth_clients;
redisTLSContextConfig tls_ctx_config;
/* cpu affinity */
char *server_cpulist; /* cpu affinity list of redis server main/io thread. */
char *bio_cpulist; /* cpu affinity list of bio thread. */
char *aof_rewrite_cpulist; /* cpu affinity list of aof rewrite process. */
char *bgsave_cpulist; /* cpu affinity list of bgsave process. */
/* Sentinel config */
struct sentinelConfig *sentinel_config; /* sentinel config to load at startup time. */
/* Coordinate failover info */
mstime_t failover_end_time; /* Deadline for failover command. */
int force_failover; /* If true then failover will be forced at the
* deadline, otherwise failover is aborted. */
char *target_replica_host; /* Failover target host. If null during a
* failover then any replica can be used. */
int target_replica_port; /* Failover target port */
int failover_state; /* Failover state */
int cluster_allow_pubsubshard_when_down; /* Is pubsubshard allowed when the cluster
is down, doesn't affect pubsub global. */
long reply_buffer_peak_reset_time; /* The amount of time (in milliseconds) to wait between reply buffer peak resets */
int reply_buffer_resizing_enabled; /* Is reply buffer resizing enabled (1 by default) */
/* Local environment */
char *locale_collate;
};
#define MAX_KEYS_BUFFER 256
typedef struct {
int pos; /* The position of the key within the client array */
int flags; /* The flags associated with the key access, see
CMD_KEY_* for more information */
} keyReference;
/* A result structure for the various getkeys function calls. It lists the
* keys as indices to the provided argv. This functionality is also re-used
* for returning channel information.
*/
typedef struct {
keyReference keysbuf[MAX_KEYS_BUFFER]; /* Pre-allocated buffer, to save heap allocations */
keyReference *keys; /* Key indices array, points to keysbuf or heap */
int numkeys; /* Number of key indices return */
int size; /* Available array size */
} getKeysResult;
#define GETKEYS_RESULT_INIT { {{0}}, NULL, 0, MAX_KEYS_BUFFER }
/* Key specs definitions.
*
* Brief: This is a scheme that tries to describe the location
* of key arguments better than the old [first,last,step] scheme
* which is limited and doesn't fit many commands.
*
* There are two steps:
* 1. begin_search (BS): in which index should we start searching for keys?
* 2. find_keys (FK): relative to the output of BS, how can we will which args are keys?
*
* There are two types of BS:
* 1. index: key args start at a constant index
* 2. keyword: key args start just after a specific keyword
*
* There are two kinds of FK:
* 1. range: keys end at a specific index (or relative to the last argument)
* 2. keynum: there's an arg that contains the number of key args somewhere before the keys themselves
*/
/* WARNING! Must be synced with generate-command-code.py and RedisModuleKeySpecBeginSearchType */
typedef enum {
KSPEC_BS_INVALID = 0, /* Must be 0 */
KSPEC_BS_UNKNOWN,
KSPEC_BS_INDEX,
KSPEC_BS_KEYWORD
} kspec_bs_type;
/* WARNING! Must be synced with generate-command-code.py and RedisModuleKeySpecFindKeysType */
typedef enum {
KSPEC_FK_INVALID = 0, /* Must be 0 */
KSPEC_FK_UNKNOWN,
KSPEC_FK_RANGE,
KSPEC_FK_KEYNUM
} kspec_fk_type;
/* WARNING! This struct must match RedisModuleCommandKeySpec */
typedef struct {
/* Declarative data */
const char *notes;
uint64_t flags;
kspec_bs_type begin_search_type;
union {
struct {
/* The index from which we start the search for keys */
int pos;
} index;
struct {
/* The keyword that indicates the beginning of key args */
const char *keyword;
/* An index in argv from which to start searching.
* Can be negative, which means start search from the end, in reverse
* (Example: -2 means to start in reverse from the penultimate arg) */
int startfrom;
} keyword;
} bs;
kspec_fk_type find_keys_type;
union {
/* NOTE: Indices in this struct are relative to the result of the begin_search step!
* These are: range.lastkey, keynum.keynumidx, keynum.firstkey */
struct {
/* Index of the last key.
* Can be negative, in which case it's not relative. -1 indicating till the last argument,
* -2 one before the last and so on. */
int lastkey;
/* How many args should we skip after finding a key, in order to find the next one. */
int keystep;
/* If lastkey is -1, we use limit to stop the search by a factor. 0 and 1 mean no limit.
* 2 means 1/2 of the remaining args, 3 means 1/3, and so on. */
int limit;
} range;
struct {
/* Index of the argument containing the number of keys to come */
int keynumidx;
/* Index of the fist key (Usually it's just after keynumidx, in
* which case it should be set to keynumidx+1). */
int firstkey;
/* How many args should we skip after finding a key, in order to find the next one. */
int keystep;
} keynum;
} fk;
} keySpec;
#ifdef LOG_REQ_RES
/* Must be synced with generate-command-code.py */
typedef enum {
JSON_TYPE_STRING,
JSON_TYPE_INTEGER,
JSON_TYPE_BOOLEAN,
JSON_TYPE_OBJECT,
JSON_TYPE_ARRAY,
} jsonType;
typedef struct jsonObjectElement {
jsonType type;
const char *key;
union {
const char *string;
long long integer;
int boolean;
struct jsonObject *object;
struct {
struct jsonObject **objects;
int length;
} array;
} value;
} jsonObjectElement;
typedef struct jsonObject {
struct jsonObjectElement *elements;
int length;
} jsonObject;
#endif
/* WARNING! This struct must match RedisModuleCommandHistoryEntry */
typedef struct {
const char *since;
const char *changes;
} commandHistory;
/* Must be synced with COMMAND_GROUP_STR and generate-command-code.py */
typedef enum {
COMMAND_GROUP_GENERIC,
COMMAND_GROUP_STRING,
COMMAND_GROUP_LIST,
COMMAND_GROUP_SET,
COMMAND_GROUP_SORTED_SET,
COMMAND_GROUP_HASH,
COMMAND_GROUP_PUBSUB,
COMMAND_GROUP_TRANSACTIONS,
COMMAND_GROUP_CONNECTION,
COMMAND_GROUP_SERVER,
COMMAND_GROUP_SCRIPTING,
COMMAND_GROUP_HYPERLOGLOG,
COMMAND_GROUP_CLUSTER,
COMMAND_GROUP_SENTINEL,
COMMAND_GROUP_GEO,
COMMAND_GROUP_STREAM,
COMMAND_GROUP_BITMAP,
COMMAND_GROUP_MODULE,
} redisCommandGroup;
typedef void redisCommandProc(client *c);
typedef int redisGetKeysProc(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
/* Redis command structure.
*
* Note that the command table is in commands.c and it is auto-generated.
*
* This is the meaning of the flags:
*
* CMD_WRITE: Write command (may modify the key space).
*
* CMD_READONLY: Commands just reading from keys without changing the content.
* Note that commands that don't read from the keyspace such as
* TIME, SELECT, INFO, administrative commands, and connection
* or transaction related commands (multi, exec, discard, ...)
* are not flagged as read-only commands, since they affect the
* server or the connection in other ways.
*
* CMD_DENYOOM: May increase memory usage once called. Don't allow if out
* of memory.
*
* CMD_ADMIN: Administrative command, like SAVE or SHUTDOWN.
*
* CMD_PUBSUB: Pub/Sub related command.
*
* CMD_NOSCRIPT: Command not allowed in scripts.
*
* CMD_BLOCKING: The command has the potential to block the client.
*
* CMD_LOADING: Allow the command while loading the database.
*
* CMD_NO_ASYNC_LOADING: Deny during async loading (when a replica uses diskless
* sync swapdb, and allows access to the old dataset)
*
* CMD_STALE: Allow the command while a slave has stale data but is not
* allowed to serve this data. Normally no command is accepted
* in this condition but just a few.
*
* CMD_SKIP_MONITOR: Do not automatically propagate the command on MONITOR.
*
* CMD_SKIP_SLOWLOG: Do not automatically propagate the command to the slowlog.
*
* CMD_ASKING: Perform an implicit ASKING for this command, so the
* command will be accepted in cluster mode if the slot is marked
* as 'importing'.
*
* CMD_FAST: Fast command: O(1) or O(log(N)) command that should never
* delay its execution as long as the kernel scheduler is giving
* us time. Note that commands that may trigger a DEL as a side
* effect (like SET) are not fast commands.
*
* CMD_NO_AUTH: Command doesn't require authentication
*
* CMD_MAY_REPLICATE: Command may produce replication traffic, but should be
* allowed under circumstances where write commands are disallowed.
* Examples include PUBLISH, which replicates pubsub messages,and
* EVAL, which may execute write commands, which are replicated,
* or may just execute read commands. A command can not be marked
* both CMD_WRITE and CMD_MAY_REPLICATE
*
* CMD_SENTINEL: This command is present in sentinel mode.
*
* CMD_ONLY_SENTINEL: This command is present only when in sentinel mode.
* And should be removed from redis.
*
* CMD_NO_MANDATORY_KEYS: This key arguments for this command are optional.
*
* CMD_NO_MULTI: The command is not allowed inside a transaction
*
* CMD_ALLOW_BUSY: The command can run while another command is running for
* a long time (timedout script, module command that yields)
*
* CMD_TOUCHES_ARBITRARY_KEYS: The command may touch (and cause lazy-expire)
* arbitrary key (i.e not provided in argv)
*
* The following additional flags are only used in order to put commands
* in a specific ACL category. Commands can have multiple ACL categories.
* See redis.conf for the exact meaning of each.
*
* @keyspace, @read, @write, @set, @sortedset, @list, @hash, @string, @bitmap,
* @hyperloglog, @stream, @admin, @fast, @slow, @pubsub, @blocking, @dangerous,
* @connection, @transaction, @scripting, @geo.
*
* Note that:
*
* 1) The read-only flag implies the @read ACL category.
* 2) The write flag implies the @write ACL category.
* 3) The fast flag implies the @fast ACL category.
* 4) The admin flag implies the @admin and @dangerous ACL category.
* 5) The pub-sub flag implies the @pubsub ACL category.
* 6) The lack of fast flag implies the @slow ACL category.
* 7) The non obvious "keyspace" category includes the commands
* that interact with keys without having anything to do with
* specific data structures, such as: DEL, RENAME, MOVE, SELECT,
* TYPE, EXPIRE*, PEXPIRE*, TTL, PTTL, ...
*/
struct redisCommand {
/* Declarative data */
const char *declared_name; /* A string representing the command declared_name.
* It is a const char * for native commands and SDS for module commands. */
const char *summary; /* Summary of the command (optional). */
const char *complexity; /* Complexity description (optional). */
const char *since; /* Debut version of the command (optional). */
int doc_flags; /* Flags for documentation (see CMD_DOC_*). */
const char *replaced_by; /* In case the command is deprecated, this is the successor command. */
const char *deprecated_since; /* In case the command is deprecated, when did it happen? */
redisCommandGroup group; /* Command group */
commandHistory *history; /* History of the command */
int num_history;
const char **tips; /* An array of strings that are meant to be tips for clients/proxies regarding this command */
int num_tips;
redisCommandProc *proc; /* Command implementation */
int arity; /* Number of arguments, it is possible to use -N to say >= N */
uint64_t flags; /* Command flags, see CMD_*. */
uint64_t acl_categories; /* ACl categories, see ACL_CATEGORY_*. */
keySpec *key_specs;
int key_specs_num;
/* Use a function to determine keys arguments in a command line.
* Used for Redis Cluster redirect (may be NULL) */
redisGetKeysProc *getkeys_proc;
int num_args; /* Length of args array. */
/* Array of subcommands (may be NULL) */
struct redisCommand *subcommands;
/* Array of arguments (may be NULL) */
struct redisCommandArg *args;
#ifdef LOG_REQ_RES
/* Reply schema */
struct jsonObject *reply_schema;
#endif
/* Runtime populated data */
long long microseconds, calls, rejected_calls, failed_calls;
int id; /* Command ID. This is a progressive ID starting from 0 that
is assigned at runtime, and is used in order to check
ACLs. A connection is able to execute a given command if
the user associated to the connection has this command
bit set in the bitmap of allowed commands. */
sds fullname; /* A SDS string representing the command fullname. */
struct hdr_histogram* latency_histogram; /*points to the command latency command histogram (unit of time nanosecond) */
keySpec legacy_range_key_spec; /* The legacy (first,last,step) key spec is
* still maintained (if applicable) so that
* we can still support the reply format of
* COMMAND INFO and COMMAND GETKEYS */
dict *subcommands_dict; /* A dictionary that holds the subcommands, the key is the subcommand sds name
* (not the fullname), and the value is the redisCommand structure pointer. */
struct redisCommand *parent;
struct RedisModuleCommand *module_cmd; /* A pointer to the module command data (NULL if native command) */
};
struct redisError {
long long count;
};
struct redisFunctionSym {
char *name;
unsigned long pointer;
};
typedef struct _redisSortObject {
robj *obj;
union {
double score;
robj *cmpobj;
} u;
} redisSortObject;
typedef struct _redisSortOperation {
int type;
robj *pattern;
} redisSortOperation;
/* Structure to hold list iteration abstraction. */
typedef struct {
robj *subject;
unsigned char encoding;
unsigned char direction; /* Iteration direction */
unsigned char *lpi; /* listpack iterator */
quicklistIter *iter; /* quicklist iterator */
} listTypeIterator;
/* Structure for an entry while iterating over a list. */
typedef struct {
listTypeIterator *li;
unsigned char *lpe; /* Entry in listpack */
quicklistEntry entry; /* Entry in quicklist */
} listTypeEntry;
/* Structure to hold set iteration abstraction. */
typedef struct {
robj *subject;
int encoding;
int ii; /* intset iterator */
dictIterator *di;
unsigned char *lpi; /* listpack iterator */
} setTypeIterator;
/* Structure to hold hash iteration abstraction. Note that iteration over
* hashes involves both fields and values. Because it is possible that
* not both are required, store pointers in the iterator to avoid
* unnecessary memory allocation for fields/values. */
typedef struct {
robj *subject;
int encoding;
unsigned char *fptr, *vptr;
dictIterator *di;
dictEntry *de;
} hashTypeIterator;
#include "stream.h" /* Stream data type header file. */
#define OBJ_HASH_KEY 1
#define OBJ_HASH_VALUE 2
#define IO_THREADS_OP_IDLE 0
#define IO_THREADS_OP_READ 1
#define IO_THREADS_OP_WRITE 2
extern int io_threads_op;
/*-----------------------------------------------------------------------------
* Extern declarations
*----------------------------------------------------------------------------*/
extern struct redisServer server;
extern struct sharedObjectsStruct shared;
extern dictType objectKeyPointerValueDictType;
extern dictType objectKeyHeapPointerValueDictType;
extern dictType setDictType;
extern dictType BenchmarkDictType;
extern dictType zsetDictType;
extern dictType dbDictType;
extern double R_Zero, R_PosInf, R_NegInf, R_Nan;
extern dictType hashDictType;
extern dictType stringSetDictType;
extern dictType externalStringType;
extern dictType sdsHashDictType;
extern dictType clientDictType;
extern dictType objToDictDictType;
extern dictType dbExpiresDictType;
extern dictType modulesDictType;
extern dictType sdsReplyDictType;
extern dictType keylistDictType;
extern dict *modules;
/*-----------------------------------------------------------------------------
* Functions prototypes
*----------------------------------------------------------------------------*/
/* Command metadata */
void populateCommandLegacyRangeSpec(struct redisCommand *c);
/* Modules */
void moduleInitModulesSystem(void);
void moduleInitModulesSystemLast(void);
void modulesCron(void);
int moduleLoad(const char *path, void **argv, int argc, int is_loadex);
int moduleUnload(sds name, const char **errmsg);
void moduleLoadFromQueue(void);
int moduleGetCommandKeysViaAPI(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int moduleGetCommandChannelsViaAPI(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
moduleType *moduleTypeLookupModuleByID(uint64_t id);
moduleType *moduleTypeLookupModuleByName(const char *name);
moduleType *moduleTypeLookupModuleByNameIgnoreCase(const char *name);
void moduleTypeNameByID(char *name, uint64_t moduleid);
const char *moduleTypeModuleName(moduleType *mt);
const char *moduleNameFromCommand(struct redisCommand *cmd);
void moduleFreeContext(struct RedisModuleCtx *ctx);
void moduleCallCommandUnblockedHandler(client *c);
int isModuleClientUnblocked(client *c);
void unblockClientFromModule(client *c);
void moduleHandleBlockedClients(void);
void moduleBlockedClientTimedOut(client *c, int from_module);
void modulePipeReadable(aeEventLoop *el, int fd, void *privdata, int mask);
size_t moduleCount(void);
void moduleAcquireGIL(void);
int moduleTryAcquireGIL(void);
void moduleReleaseGIL(void);
void moduleNotifyKeyspaceEvent(int type, const char *event, robj *key, int dbid);
void firePostExecutionUnitJobs(void);
void moduleCallCommandFilters(client *c);
void modulePostExecutionUnitOperations(void);
void ModuleForkDoneHandler(int exitcode, int bysignal);
int TerminateModuleForkChild(int child_pid, int wait);
ssize_t rdbSaveModulesAux(rio *rdb, int when);
int moduleAllDatatypesHandleErrors(void);
int moduleAllModulesHandleReplAsyncLoad(void);
sds modulesCollectInfo(sds info, dict *sections_dict, int for_crash_report, int sections);
void moduleFireServerEvent(uint64_t eid, int subid, void *data);
void processModuleLoadingProgressEvent(int is_aof);
int moduleTryServeClientBlockedOnKey(client *c, robj *key);
void moduleUnblockClient(client *c);
int moduleBlockedClientMayTimeout(client *c);
int moduleClientIsBlockedOnKeys(client *c);
void moduleNotifyUserChanged(client *c);
void moduleNotifyKeyUnlink(robj *key, robj *val, int dbid, int flags);
size_t moduleGetFreeEffort(robj *key, robj *val, int dbid);
size_t moduleGetMemUsage(robj *key, robj *val, size_t sample_size, int dbid);
robj *moduleTypeDupOrReply(client *c, robj *fromkey, robj *tokey, int todb, robj *value);
int moduleDefragValue(robj *key, robj *obj, int dbid);
int moduleLateDefrag(robj *key, robj *value, unsigned long *cursor, long long endtime, int dbid);
void moduleDefragGlobals(void);
void *moduleGetHandleByName(char *modulename);
int moduleIsModuleCommand(void *module_handle, struct redisCommand *cmd);
/* Utils */
long long ustime(void);
mstime_t mstime(void);
mstime_t commandTimeSnapshot(void);
void getRandomHexChars(char *p, size_t len);
void getRandomBytes(unsigned char *p, size_t len);
uint64_t crc64(uint64_t crc, const unsigned char *s, uint64_t l);
void exitFromChild(int retcode);
long long redisPopcount(void *s, long count);
int redisSetProcTitle(char *title);
int validateProcTitleTemplate(const char *template);
int redisCommunicateSystemd(const char *sd_notify_msg);
void redisSetCpuAffinity(const char *cpulist);
/* afterErrorReply flags */
#define ERR_REPLY_FLAG_NO_STATS_UPDATE (1ULL<<0) /* Indicating that we should not update
error stats after sending error reply */
/* networking.c -- Networking and Client related operations */
client *createClient(connection *conn);
void freeClient(client *c);
void freeClientAsync(client *c);
void logInvalidUseAndFreeClientAsync(client *c, const char *fmt, ...);
int beforeNextClient(client *c);
void clearClientConnectionState(client *c);
void resetClient(client *c);
void freeClientOriginalArgv(client *c);
void freeClientArgv(client *c);
void sendReplyToClient(connection *conn);
void *addReplyDeferredLen(client *c);
void setDeferredArrayLen(client *c, void *node, long length);
void setDeferredMapLen(client *c, void *node, long length);
void setDeferredSetLen(client *c, void *node, long length);
void setDeferredAttributeLen(client *c, void *node, long length);
void setDeferredPushLen(client *c, void *node, long length);
int processInputBuffer(client *c);
void acceptCommonHandler(connection *conn, int flags, char *ip);
void readQueryFromClient(connection *conn);
int prepareClientToWrite(client *c);
void addReplyNull(client *c);
void addReplyNullArray(client *c);
void addReplyBool(client *c, int b);
void addReplyVerbatim(client *c, const char *s, size_t len, const char *ext);
void addReplyProto(client *c, const char *s, size_t len);
void AddReplyFromClient(client *c, client *src);
void addReplyBulk(client *c, robj *obj);
void addReplyBulkCString(client *c, const char *s);
void addReplyBulkCBuffer(client *c, const void *p, size_t len);
void addReplyBulkLongLong(client *c, long long ll);
void addReply(client *c, robj *obj);
void addReplyStatusLength(client *c, const char *s, size_t len);
void addReplySds(client *c, sds s);
void addReplyBulkSds(client *c, sds s);
void setDeferredReplyBulkSds(client *c, void *node, sds s);
void addReplyErrorObject(client *c, robj *err);
void addReplyOrErrorObject(client *c, robj *reply);
void afterErrorReply(client *c, const char *s, size_t len, int flags);
void addReplyErrorFormatInternal(client *c, int flags, const char *fmt, va_list ap);
void addReplyErrorSdsEx(client *c, sds err, int flags);
void addReplyErrorSds(client *c, sds err);
void addReplyErrorSdsSafe(client *c, sds err);
void addReplyError(client *c, const char *err);
void addReplyErrorArity(client *c);
void addReplyErrorExpireTime(client *c);
void addReplyStatus(client *c, const char *status);
void addReplyDouble(client *c, double d);
void addReplyLongLongWithPrefix(client *c, long long ll, char prefix);
void addReplyBigNum(client *c, const char* num, size_t len);
void addReplyHumanLongDouble(client *c, long double d);
void addReplyLongLong(client *c, long long ll);
void addReplyArrayLen(client *c, long length);
void addReplyMapLen(client *c, long length);
void addReplySetLen(client *c, long length);
void addReplyAttributeLen(client *c, long length);
void addReplyPushLen(client *c, long length);
void addReplyHelp(client *c, const char **help);
void addExtendedReplyHelp(client *c, const char **help, const char **extended_help);
void addReplySubcommandSyntaxError(client *c);
void addReplyLoadedModules(client *c);
void copyReplicaOutputBuffer(client *dst, client *src);
void addListRangeReply(client *c, robj *o, long start, long end, int reverse);
void deferredAfterErrorReply(client *c, list *errors);
size_t sdsZmallocSize(sds s);
size_t getStringObjectSdsUsedMemory(robj *o);
void freeClientReplyValue(void *o);
void *dupClientReplyValue(void *o);
char *getClientPeerId(client *client);
char *getClientSockName(client *client);
sds catClientInfoString(sds s, client *client);
sds getAllClientsInfoString(int type);
int clientSetName(client *c, robj *name, const char **err);
void rewriteClientCommandVector(client *c, int argc, ...);
void rewriteClientCommandArgument(client *c, int i, robj *newval);
void replaceClientCommandVector(client *c, int argc, robj **argv);
void redactClientCommandArgument(client *c, int argc);
size_t getClientOutputBufferMemoryUsage(client *c);
size_t getClientMemoryUsage(client *c, size_t *output_buffer_mem_usage);
int freeClientsInAsyncFreeQueue(void);
int closeClientOnOutputBufferLimitReached(client *c, int async);
int getClientType(client *c);
int getClientTypeByName(char *name);
char *getClientTypeName(int class);
void flushSlavesOutputBuffers(void);
void disconnectSlaves(void);
void evictClients(void);
int listenToPort(connListener *fds);
void pauseActions(pause_purpose purpose, mstime_t end, uint32_t actions_bitmask);
void unpauseActions(pause_purpose purpose);
uint32_t isPausedActions(uint32_t action_bitmask);
uint32_t isPausedActionsWithUpdate(uint32_t action_bitmask);
void updatePausedActions(void);
void unblockPostponedClients(void);
void processEventsWhileBlocked(void);
void whileBlockedCron(void);
void blockingOperationStarts(void);
void blockingOperationEnds(void);
int handleClientsWithPendingWrites(void);
int handleClientsWithPendingWritesUsingThreads(void);
int handleClientsWithPendingReadsUsingThreads(void);
int stopThreadedIOIfNeeded(void);
int clientHasPendingReplies(client *c);
int updateClientMemUsageAndBucket(client *c);
void removeClientFromMemUsageBucket(client *c, int allow_eviction);
void unlinkClient(client *c);
int writeToClient(client *c, int handler_installed);
void linkClient(client *c);
void protectClient(client *c);
void unprotectClient(client *c);
void initThreadedIO(void);
client *lookupClientByID(uint64_t id);
int authRequired(client *c);
void putClientInPendingWriteQueue(client *c);
/* logreqres.c - logging of requests and responses */
void reqresReset(client *c, int free_buf);
void reqresSaveClientReplyOffset(client *c);
size_t reqresAppendRequest(client *c);
size_t reqresAppendResponse(client *c);
#ifdef __GNUC__
void addReplyErrorFormatEx(client *c, int flags, const char *fmt, ...)
__attribute__((format(printf, 3, 4)));
void addReplyErrorFormat(client *c, const char *fmt, ...)
__attribute__((format(printf, 2, 3)));
void addReplyStatusFormat(client *c, const char *fmt, ...)
__attribute__((format(printf, 2, 3)));
#else
void addReplyErrorFormatEx(client *c, int flags, const char *fmt, ...);
void addReplyErrorFormat(client *c, const char *fmt, ...);
void addReplyStatusFormat(client *c, const char *fmt, ...);
#endif
/* Client side caching (tracking mode) */
void enableTracking(client *c, uint64_t redirect_to, uint64_t options, robj **prefix, size_t numprefix);
void disableTracking(client *c);
void trackingRememberKeys(client *tracking, client *executing);
void trackingInvalidateKey(client *c, robj *keyobj, int bcast);
void trackingScheduleKeyInvalidation(uint64_t client_id, robj *keyobj);
void trackingHandlePendingKeyInvalidations(void);
void trackingInvalidateKeysOnFlush(int async);
void freeTrackingRadixTree(rax *rt);
void freeTrackingRadixTreeAsync(rax *rt);
void freeErrorsRadixTreeAsync(rax *errors);
void trackingLimitUsedSlots(void);
uint64_t trackingGetTotalItems(void);
uint64_t trackingGetTotalKeys(void);
uint64_t trackingGetTotalPrefixes(void);
void trackingBroadcastInvalidationMessages(void);
int checkPrefixCollisionsOrReply(client *c, robj **prefix, size_t numprefix);
/* List data type */
void listTypePush(robj *subject, robj *value, int where);
robj *listTypePop(robj *subject, int where);
unsigned long listTypeLength(const robj *subject);
listTypeIterator *listTypeInitIterator(robj *subject, long index, unsigned char direction);
void listTypeReleaseIterator(listTypeIterator *li);
void listTypeSetIteratorDirection(listTypeIterator *li, listTypeEntry *entry, unsigned char direction);
int listTypeNext(listTypeIterator *li, listTypeEntry *entry);
robj *listTypeGet(listTypeEntry *entry);
unsigned char *listTypeGetValue(listTypeEntry *entry, size_t *vlen, long long *lval);
void listTypeInsert(listTypeEntry *entry, robj *value, int where);
void listTypeReplace(listTypeEntry *entry, robj *value);
int listTypeEqual(listTypeEntry *entry, robj *o);
void listTypeDelete(listTypeIterator *iter, listTypeEntry *entry);
robj *listTypeDup(robj *o);
void listTypeDelRange(robj *o, long start, long stop);
void popGenericCommand(client *c, int where);
void listElementsRemoved(client *c, robj *key, int where, robj *o, long count, int signal, int *deleted);
typedef enum {
LIST_CONV_AUTO,
LIST_CONV_GROWING,
LIST_CONV_SHRINKING,
} list_conv_type;
typedef void (*beforeConvertCB)(void *data);
void listTypeTryConversion(robj *o, list_conv_type lct, beforeConvertCB fn, void *data);
void listTypeTryConversionAppend(robj *o, robj **argv, int start, int end, beforeConvertCB fn, void *data);
/* MULTI/EXEC/WATCH... */
void unwatchAllKeys(client *c);
void initClientMultiState(client *c);
void freeClientMultiState(client *c);
void queueMultiCommand(client *c, uint64_t cmd_flags);
size_t multiStateMemOverhead(client *c);
void touchWatchedKey(redisDb *db, robj *key);
int isWatchedKeyExpired(client *c);
void touchAllWatchedKeysInDb(redisDb *emptied, redisDb *replaced_with);
void discardTransaction(client *c);
void flagTransaction(client *c);
void execCommandAbort(client *c, sds error);
/* Redis object implementation */
void decrRefCount(robj *o);
void decrRefCountVoid(void *o);
void incrRefCount(robj *o);
robj *makeObjectShared(robj *o);
void freeStringObject(robj *o);
void freeListObject(robj *o);
void freeSetObject(robj *o);
void freeZsetObject(robj *o);
void freeHashObject(robj *o);
void dismissObject(robj *o, size_t dump_size);
robj *createObject(int type, void *ptr);
void initObjectLRUOrLFU(robj *o);
robj *createStringObject(const char *ptr, size_t len);
robj *createRawStringObject(const char *ptr, size_t len);
robj *createEmbeddedStringObject(const char *ptr, size_t len);
robj *tryCreateRawStringObject(const char *ptr, size_t len);
robj *tryCreateStringObject(const char *ptr, size_t len);
robj *dupStringObject(const robj *o);
int isSdsRepresentableAsLongLong(sds s, long long *llval);
int isObjectRepresentableAsLongLong(robj *o, long long *llongval);
robj *tryObjectEncoding(robj *o);
robj *tryObjectEncodingEx(robj *o, int try_trim);
robj *getDecodedObject(robj *o);
size_t stringObjectLen(robj *o);
robj *createStringObjectFromLongLong(long long value);
robj *createStringObjectFromLongLongForValue(long long value);
robj *createStringObjectFromLongLongWithSds(long long value);
robj *createStringObjectFromLongDouble(long double value, int humanfriendly);
robj *createQuicklistObject(int fill, int compress);
robj *createListListpackObject(void);
robj *createSetObject(void);
robj *createIntsetObject(void);
robj *createSetListpackObject(void);
robj *createHashObject(void);
robj *createZsetObject(void);
robj *createZsetListpackObject(void);
robj *createStreamObject(void);
robj *createModuleObject(moduleType *mt, void *value);
int getLongFromObjectOrReply(client *c, robj *o, long *target, const char *msg);
int getPositiveLongFromObjectOrReply(client *c, robj *o, long *target, const char *msg);
int getRangeLongFromObjectOrReply(client *c, robj *o, long min, long max, long *target, const char *msg);
int checkType(client *c, robj *o, int type);
int getLongLongFromObjectOrReply(client *c, robj *o, long long *target, const char *msg);
int getDoubleFromObjectOrReply(client *c, robj *o, double *target, const char *msg);
int getDoubleFromObject(const robj *o, double *target);
int getLongLongFromObject(robj *o, long long *target);
int getLongDoubleFromObject(robj *o, long double *target);
int getLongDoubleFromObjectOrReply(client *c, robj *o, long double *target, const char *msg);
int getIntFromObjectOrReply(client *c, robj *o, int *target, const char *msg);
char *strEncoding(int encoding);
int compareStringObjects(const robj *a, const robj *b);
int collateStringObjects(const robj *a, const robj *b);
int equalStringObjects(robj *a, robj *b);
unsigned long long estimateObjectIdleTime(robj *o);
void trimStringObjectIfNeeded(robj *o, int trim_small_values);
#define sdsEncodedObject(objptr) (objptr->encoding == OBJ_ENCODING_RAW || objptr->encoding == OBJ_ENCODING_EMBSTR)
/* Synchronous I/O with timeout */
ssize_t syncWrite(int fd, char *ptr, ssize_t size, long long timeout);
ssize_t syncRead(int fd, char *ptr, ssize_t size, long long timeout);
ssize_t syncReadLine(int fd, char *ptr, ssize_t size, long long timeout);
/* Replication */
void replicationFeedSlaves(list *slaves, int dictid, robj **argv, int argc);
void replicationFeedStreamFromMasterStream(char *buf, size_t buflen);
void resetReplicationBuffer(void);
void feedReplicationBuffer(char *buf, size_t len);
void freeReplicaReferencedReplBuffer(client *replica);
void replicationFeedMonitors(client *c, list *monitors, int dictid, robj **argv, int argc);
void updateSlavesWaitingBgsave(int bgsaveerr, int type);
void replicationCron(void);
void replicationStartPendingFork(void);
void replicationHandleMasterDisconnection(void);
void replicationCacheMaster(client *c);
void resizeReplicationBacklog(void);
void replicationSetMaster(char *ip, int port);
void replicationUnsetMaster(void);
void refreshGoodSlavesCount(void);
int checkGoodReplicasStatus(void);
void processClientsWaitingReplicas(void);
void unblockClientWaitingReplicas(client *c);
int replicationCountAcksByOffset(long long offset);
int replicationCountAOFAcksByOffset(long long offset);
void replicationSendNewlineToMaster(void);
long long replicationGetSlaveOffset(void);
char *replicationGetSlaveName(client *c);
long long getPsyncInitialOffset(void);
int replicationSetupSlaveForFullResync(client *slave, long long offset);
void changeReplicationId(void);
void clearReplicationId2(void);
void createReplicationBacklog(void);
void freeReplicationBacklog(void);
void replicationCacheMasterUsingMyself(void);
void feedReplicationBacklog(void *ptr, size_t len);
void incrementalTrimReplicationBacklog(size_t blocks);
int canFeedReplicaReplBuffer(client *replica);
void rebaseReplicationBuffer(long long base_repl_offset);
void showLatestBacklog(void);
void rdbPipeReadHandler(struct aeEventLoop *eventLoop, int fd, void *clientData, int mask);
void rdbPipeWriteHandlerConnRemoved(struct connection *conn);
void clearFailoverState(void);
void updateFailoverStatus(void);
void abortFailover(const char *err);
const char *getFailoverStateString(void);
/* Generic persistence functions */
void startLoadingFile(size_t size, char* filename, int rdbflags);
void startLoading(size_t size, int rdbflags, int async);
void loadingAbsProgress(off_t pos);
void loadingIncrProgress(off_t size);
void stopLoading(int success);
void updateLoadingFileName(char* filename);
void startSaving(int rdbflags);
void stopSaving(int success);
int allPersistenceDisabled(void);
#define DISK_ERROR_TYPE_AOF 1 /* Don't accept writes: AOF errors. */
#define DISK_ERROR_TYPE_RDB 2 /* Don't accept writes: RDB errors. */
#define DISK_ERROR_TYPE_NONE 0 /* No problems, we can accept writes. */
int writeCommandsDeniedByDiskError(void);
sds writeCommandsGetDiskErrorMessage(int);
/* RDB persistence */
#include "rdb.h"
void killRDBChild(void);
int bg_unlink(const char *filename);
/* AOF persistence */
void flushAppendOnlyFile(int force);
void feedAppendOnlyFile(int dictid, robj **argv, int argc);
void aofRemoveTempFile(pid_t childpid);
int rewriteAppendOnlyFileBackground(void);
int loadAppendOnlyFiles(aofManifest *am);
void stopAppendOnly(void);
int startAppendOnly(void);
void backgroundRewriteDoneHandler(int exitcode, int bysignal);
void killAppendOnlyChild(void);
void restartAOFAfterSYNC(void);
void aofLoadManifestFromDisk(void);
void aofOpenIfNeededOnServerStart(void);
void aofManifestFree(aofManifest *am);
int aofDelHistoryFiles(void);
int aofRewriteLimited(void);
/* Child info */
void openChildInfoPipe(void);
void closeChildInfoPipe(void);
void sendChildInfoGeneric(childInfoType info_type, size_t keys, double progress, char *pname);
void sendChildCowInfo(childInfoType info_type, char *pname);
void sendChildInfo(childInfoType info_type, size_t keys, char *pname);
void receiveChildInfo(void);
/* Fork helpers */
int redisFork(int purpose);
int hasActiveChildProcess(void);
void resetChildState(void);
int isMutuallyExclusiveChildType(int type);
/* acl.c -- Authentication related prototypes. */
extern rax *Users;
extern user *DefaultUser;
void ACLInit(void);
/* Return values for ACLCheckAllPerm(). */
#define ACL_OK 0
#define ACL_DENIED_CMD 1
#define ACL_DENIED_KEY 2
#define ACL_DENIED_AUTH 3 /* Only used for ACL LOG entries. */
#define ACL_DENIED_CHANNEL 4 /* Only used for pub/sub commands */
/* Context values for addACLLogEntry(). */
#define ACL_LOG_CTX_TOPLEVEL 0
#define ACL_LOG_CTX_LUA 1
#define ACL_LOG_CTX_MULTI 2
#define ACL_LOG_CTX_MODULE 3
/* ACL key permission types */
#define ACL_READ_PERMISSION (1<<0)
#define ACL_WRITE_PERMISSION (1<<1)
#define ACL_ALL_PERMISSION (ACL_READ_PERMISSION|ACL_WRITE_PERMISSION)
/* Return codes for Authentication functions to indicate the result. */
typedef enum {
AUTH_OK = 0,
AUTH_ERR,
AUTH_NOT_HANDLED,
AUTH_BLOCKED
} AuthResult;
int ACLCheckUserCredentials(robj *username, robj *password);
int ACLAuthenticateUser(client *c, robj *username, robj *password, robj **err);
int checkModuleAuthentication(client *c, robj *username, robj *password, robj **err);
void addAuthErrReply(client *c, robj *err);
unsigned long ACLGetCommandID(sds cmdname);
void ACLClearCommandID(void);
user *ACLGetUserByName(const char *name, size_t namelen);
int ACLUserCheckKeyPerm(user *u, const char *key, int keylen, int flags);
int ACLUserCheckChannelPerm(user *u, sds channel, int literal);
int ACLCheckAllUserCommandPerm(user *u, struct redisCommand *cmd, robj **argv, int argc, int *idxptr);
int ACLUserCheckCmdWithUnrestrictedKeyAccess(user *u, struct redisCommand *cmd, robj **argv, int argc, int flags);
int ACLCheckAllPerm(client *c, int *idxptr);
int ACLSetUser(user *u, const char *op, ssize_t oplen);
sds ACLStringSetUser(user *u, sds username, sds *argv, int argc);
uint64_t ACLGetCommandCategoryFlagByName(const char *name);
int ACLAddCommandCategory(const char *name, uint64_t flag);
void ACLCleanupCategoriesOnFailure(size_t num_acl_categories_added);
int ACLAppendUserForLoading(sds *argv, int argc, int *argc_err);
const char *ACLSetUserStringError(void);
int ACLLoadConfiguredUsers(void);
robj *ACLDescribeUser(user *u);
void ACLLoadUsersAtStartup(void);
void addReplyCommandCategories(client *c, struct redisCommand *cmd);
user *ACLCreateUnlinkedUser(void);
void ACLFreeUserAndKillClients(user *u);
void addACLLogEntry(client *c, int reason, int context, int argpos, sds username, sds object);
sds getAclErrorMessage(int acl_res, user *user, struct redisCommand *cmd, sds errored_val, int verbose);
void ACLUpdateDefaultUserPassword(sds password);
sds genRedisInfoStringACLStats(sds info);
void ACLRecomputeCommandBitsFromCommandRulesAllUsers(void);
/* Sorted sets data type */
/* Input flags. */
#define ZADD_IN_NONE 0
#define ZADD_IN_INCR (1<<0) /* Increment the score instead of setting it. */
#define ZADD_IN_NX (1<<1) /* Don't touch elements not already existing. */
#define ZADD_IN_XX (1<<2) /* Only touch elements already existing. */
#define ZADD_IN_GT (1<<3) /* Only update existing when new scores are higher. */
#define ZADD_IN_LT (1<<4) /* Only update existing when new scores are lower. */
/* Output flags. */
#define ZADD_OUT_NOP (1<<0) /* Operation not performed because of conditionals.*/
#define ZADD_OUT_NAN (1<<1) /* Only touch elements already existing. */
#define ZADD_OUT_ADDED (1<<2) /* The element was new and was added. */
#define ZADD_OUT_UPDATED (1<<3) /* The element already existed, score updated. */
/* Struct to hold an inclusive/exclusive range spec by score comparison. */
typedef struct {
double min, max;
int minex, maxex; /* are min or max exclusive? */
} zrangespec;
/* Struct to hold an inclusive/exclusive range spec by lexicographic comparison. */
typedef struct {
sds min, max; /* May be set to shared.(minstring|maxstring) */
int minex, maxex; /* are min or max exclusive? */
} zlexrangespec;
/* flags for incrCommandFailedCalls */
#define ERROR_COMMAND_REJECTED (1<<0) /* Indicate to update the command rejected stats */
#define ERROR_COMMAND_FAILED (1<<1) /* Indicate to update the command failed stats */
zskiplist *zslCreate(void);
void zslFree(zskiplist *zsl);
zskiplistNode *zslInsert(zskiplist *zsl, double score, sds ele);
unsigned char *zzlInsert(unsigned char *zl, sds ele, double score);
int zslDelete(zskiplist *zsl, double score, sds ele, zskiplistNode **node);
zskiplistNode *zslNthInRange(zskiplist *zsl, zrangespec *range, long n);
double zzlGetScore(unsigned char *sptr);
void zzlNext(unsigned char *zl, unsigned char **eptr, unsigned char **sptr);
void zzlPrev(unsigned char *zl, unsigned char **eptr, unsigned char **sptr);
unsigned char *zzlFirstInRange(unsigned char *zl, zrangespec *range);
unsigned char *zzlLastInRange(unsigned char *zl, zrangespec *range);
unsigned long zsetLength(const robj *zobj);
void zsetConvert(robj *zobj, int encoding);
void zsetConvertToListpackIfNeeded(robj *zobj, size_t maxelelen, size_t totelelen);
int zsetScore(robj *zobj, sds member, double *score);
unsigned long zslGetRank(zskiplist *zsl, double score, sds o);
int zsetAdd(robj *zobj, double score, sds ele, int in_flags, int *out_flags, double *newscore);
long zsetRank(robj *zobj, sds ele, int reverse, double *score);
int zsetDel(robj *zobj, sds ele);
robj *zsetDup(robj *o);
void genericZpopCommand(client *c, robj **keyv, int keyc, int where, int emitkey, long count, int use_nested_array, int reply_nil_when_empty, int *deleted);
sds lpGetObject(unsigned char *sptr);
int zslValueGteMin(double value, zrangespec *spec);
int zslValueLteMax(double value, zrangespec *spec);
void zslFreeLexRange(zlexrangespec *spec);
int zslParseLexRange(robj *min, robj *max, zlexrangespec *spec);
unsigned char *zzlFirstInLexRange(unsigned char *zl, zlexrangespec *range);
unsigned char *zzlLastInLexRange(unsigned char *zl, zlexrangespec *range);
zskiplistNode *zslNthInLexRange(zskiplist *zsl, zlexrangespec *range, long n);
int zzlLexValueGteMin(unsigned char *p, zlexrangespec *spec);
int zzlLexValueLteMax(unsigned char *p, zlexrangespec *spec);
int zslLexValueGteMin(sds value, zlexrangespec *spec);
int zslLexValueLteMax(sds value, zlexrangespec *spec);
/* Core functions */
int getMaxmemoryState(size_t *total, size_t *logical, size_t *tofree, float *level);
size_t freeMemoryGetNotCountedMemory(void);
int overMaxmemoryAfterAlloc(size_t moremem);
uint64_t getCommandFlags(client *c);
int processCommand(client *c);
int processPendingCommandAndInputBuffer(client *c);
int processCommandAndResetClient(client *c);
void setupSignalHandlers(void);
int createSocketAcceptHandler(connListener *sfd, aeFileProc *accept_handler);
connListener *listenerByType(const char *typename);
int changeListener(connListener *listener);
void closeListener(connListener *listener);
struct redisCommand *lookupSubcommand(struct redisCommand *container, sds sub_name);
struct redisCommand *lookupCommand(robj **argv, int argc);
struct redisCommand *lookupCommandBySdsLogic(dict *commands, sds s);
struct redisCommand *lookupCommandBySds(sds s);
struct redisCommand *lookupCommandByCStringLogic(dict *commands, const char *s);
struct redisCommand *lookupCommandByCString(const char *s);
struct redisCommand *lookupCommandOrOriginal(robj **argv, int argc);
int commandCheckExistence(client *c, sds *err);
int commandCheckArity(client *c, sds *err);
void startCommandExecution(void);
int incrCommandStatsOnError(struct redisCommand *cmd, int flags);
void call(client *c, int flags);
void alsoPropagate(int dbid, robj **argv, int argc, int target);
void postExecutionUnitOperations(void);
void redisOpArrayFree(redisOpArray *oa);
void forceCommandPropagation(client *c, int flags);
void preventCommandPropagation(client *c);
void preventCommandAOF(client *c);
void preventCommandReplication(client *c);
void slowlogPushCurrentCommand(client *c, struct redisCommand *cmd, ustime_t duration);
void updateCommandLatencyHistogram(struct hdr_histogram** latency_histogram, int64_t duration_hist);
int prepareForShutdown(int flags);
void replyToClientsBlockedOnShutdown(void);
int abortShutdown(void);
void afterCommand(client *c);
int mustObeyClient(client *c);
#ifdef __GNUC__
void _serverLog(int level, const char *fmt, ...)
__attribute__((format(printf, 2, 3)));
void serverLogFromHandler(int level, const char *fmt, ...)
__attribute__((format(printf, 2, 3)));
#else
void serverLogFromHandler(int level, const char *fmt, ...);
void _serverLog(int level, const char *fmt, ...);
#endif
void serverLogRaw(int level, const char *msg);
void serverLogRawFromHandler(int level, const char *msg);
void usage(void);
void updateDictResizePolicy(void);
void populateCommandTable(void);
void resetCommandTableStats(dict* commands);
void resetErrorTableStats(void);
void adjustOpenFilesLimit(void);
void incrementErrorCount(const char *fullerr, size_t namelen);
void closeListeningSockets(int unlink_unix_socket);
void updateCachedTime(int update_daylight_info);
void enterExecutionUnit(int update_cached_time, long long us);
void exitExecutionUnit(void);
void resetServerStats(void);
void activeDefragCycle(void);
unsigned int getLRUClock(void);
unsigned int LRU_CLOCK(void);
const char *evictPolicyToString(void);
struct redisMemOverhead *getMemoryOverheadData(void);
void freeMemoryOverheadData(struct redisMemOverhead *mh);
void checkChildrenDone(void);
int setOOMScoreAdj(int process_class);
void rejectCommandFormat(client *c, const char *fmt, ...);
void *activeDefragAlloc(void *ptr);
robj *activeDefragStringOb(robj* ob);
void dismissSds(sds s);
void dismissMemory(void* ptr, size_t size_hint);
void dismissMemoryInChild(void);
#define RESTART_SERVER_NONE 0
#define RESTART_SERVER_GRACEFULLY (1<<0) /* Do proper shutdown. */
#define RESTART_SERVER_CONFIG_REWRITE (1<<1) /* CONFIG REWRITE before restart.*/
int restartServer(int flags, mstime_t delay);
int getKeySlot(sds key);
int calculateKeySlot(sds key);
/* kvstore wrappers */
int dbExpand(redisDb *db, uint64_t db_size, int try_expand);
int dbExpandExpires(redisDb *db, uint64_t db_size, int try_expand);
dictEntry *dbFind(redisDb *db, void *key);
dictEntry *dbFindExpires(redisDb *db, void *key);
unsigned long long dbSize(redisDb *db);
unsigned long long dbScan(redisDb *db, unsigned long long cursor, dictScanFunction *scan_cb, void *privdata);
/* Set data type */
robj *setTypeCreate(sds value, size_t size_hint);
int setTypeAdd(robj *subject, sds value);
int setTypeAddAux(robj *set, char *str, size_t len, int64_t llval, int str_is_sds);
int setTypeRemove(robj *subject, sds value);
int setTypeRemoveAux(robj *set, char *str, size_t len, int64_t llval, int str_is_sds);
int setTypeIsMember(robj *subject, sds value);
int setTypeIsMemberAux(robj *set, char *str, size_t len, int64_t llval, int str_is_sds);
setTypeIterator *setTypeInitIterator(robj *subject);
void setTypeReleaseIterator(setTypeIterator *si);
int setTypeNext(setTypeIterator *si, char **str, size_t *len, int64_t *llele);
sds setTypeNextObject(setTypeIterator *si);
int setTypeRandomElement(robj *setobj, char **str, size_t *len, int64_t *llele);
unsigned long setTypeSize(const robj *subject);
void setTypeConvert(robj *subject, int enc);
int setTypeConvertAndExpand(robj *setobj, int enc, unsigned long cap, int panic);
robj *setTypeDup(robj *o);
/* Hash data type */
#define HASH_SET_TAKE_FIELD (1<<0)
#define HASH_SET_TAKE_VALUE (1<<1)
#define HASH_SET_COPY 0
void hashTypeConvert(robj *o, int enc);
void hashTypeTryConversion(robj *subject, robj **argv, int start, int end);
int hashTypeExists(robj *o, sds key);
int hashTypeDelete(robj *o, sds key);
unsigned long hashTypeLength(const robj *o);
hashTypeIterator *hashTypeInitIterator(robj *subject);
void hashTypeReleaseIterator(hashTypeIterator *hi);
int hashTypeNext(hashTypeIterator *hi);
void hashTypeCurrentFromListpack(hashTypeIterator *hi, int what,
unsigned char **vstr,
unsigned int *vlen,
long long *vll);
sds hashTypeCurrentFromHashTable(hashTypeIterator *hi, int what);
void hashTypeCurrentObject(hashTypeIterator *hi, int what, unsigned char **vstr, unsigned int *vlen, long long *vll);
sds hashTypeCurrentObjectNewSds(hashTypeIterator *hi, int what);
robj *hashTypeLookupWriteOrCreate(client *c, robj *key);
robj *hashTypeGetValueObject(robj *o, sds field);
int hashTypeSet(robj *o, sds field, sds value, int flags);
robj *hashTypeDup(robj *o);
/* Pub / Sub */
int pubsubUnsubscribeAllChannels(client *c, int notify);
int pubsubUnsubscribeShardAllChannels(client *c, int notify);
void pubsubShardUnsubscribeAllChannelsInSlot(unsigned int slot);
int pubsubUnsubscribeAllPatterns(client *c, int notify);
int pubsubPublishMessage(robj *channel, robj *message, int sharded);
int pubsubPublishMessageAndPropagateToCluster(robj *channel, robj *message, int sharded);
void addReplyPubsubMessage(client *c, robj *channel, robj *msg, robj *message_bulk);
int serverPubsubSubscriptionCount(void);
int serverPubsubShardSubscriptionCount(void);
size_t pubsubMemOverhead(client *c);
void unmarkClientAsPubSub(client *c);
int pubsubTotalSubscriptions(void);
dict *getClientPubSubChannels(client *c);
dict *getClientPubSubShardChannels(client *c);
/* Keyspace events notification */
void notifyKeyspaceEvent(int type, char *event, robj *key, int dbid);
int keyspaceEventsStringToFlags(char *classes);
sds keyspaceEventsFlagsToString(int flags);
/* Configuration */
/* Configuration Flags */
#define MODIFIABLE_CONFIG 0 /* This is the implied default for a standard
* config, which is mutable. */
#define IMMUTABLE_CONFIG (1ULL<<0) /* Can this value only be set at startup? */
#define SENSITIVE_CONFIG (1ULL<<1) /* Does this value contain sensitive information */
#define DEBUG_CONFIG (1ULL<<2) /* Values that are useful for debugging. */
#define MULTI_ARG_CONFIG (1ULL<<3) /* This config receives multiple arguments. */
#define HIDDEN_CONFIG (1ULL<<4) /* This config is hidden in `config get <pattern>` (used for tests/debugging) */
#define PROTECTED_CONFIG (1ULL<<5) /* Becomes immutable if enable-protected-configs is enabled. */
#define DENY_LOADING_CONFIG (1ULL<<6) /* This config is forbidden during loading. */
#define ALIAS_CONFIG (1ULL<<7) /* For configs with multiple names, this flag is set on the alias. */
#define MODULE_CONFIG (1ULL<<8) /* This config is a module config */
#define VOLATILE_CONFIG (1ULL<<9) /* The config is a reference to the config data and not the config data itself (ex.
* a file name containing more configuration like a tls key). In this case we want
* to apply the configuration change even if the new config value is the same as
* the old. */
#define INTEGER_CONFIG 0 /* No flags means a simple integer configuration */
#define MEMORY_CONFIG (1<<0) /* Indicates if this value can be loaded as a memory value */
#define PERCENT_CONFIG (1<<1) /* Indicates if this value can be loaded as a percent (and stored as a negative int) */
#define OCTAL_CONFIG (1<<2) /* This value uses octal representation */
/* Enum Configs contain an array of configEnum objects that match a string with an integer. */
typedef struct configEnum {
char *name;
int val;
} configEnum;
/* Type of configuration. */
typedef enum {
BOOL_CONFIG,
NUMERIC_CONFIG,
STRING_CONFIG,
SDS_CONFIG,
ENUM_CONFIG,
SPECIAL_CONFIG,
} configType;
void loadServerConfig(char *filename, char config_from_stdin, char *options);
void appendServerSaveParams(time_t seconds, int changes);
void resetServerSaveParams(void);
struct rewriteConfigState; /* Forward declaration to export API. */
int rewriteConfigRewriteLine(struct rewriteConfigState *state, const char *option, sds line, int force);
void rewriteConfigMarkAsProcessed(struct rewriteConfigState *state, const char *option);
int rewriteConfig(char *path, int force_write);
void initConfigValues(void);
void removeConfig(sds name);
sds getConfigDebugInfo(void);
int allowProtectedAction(int config, client *c);
void initServerClientMemUsageBuckets(void);
void freeServerClientMemUsageBuckets(void);
/* Module Configuration */
typedef struct ModuleConfig ModuleConfig;
int performModuleConfigSetFromName(sds name, sds value, const char **err);
int performModuleConfigSetDefaultFromName(sds name, const char **err);
void addModuleBoolConfig(const char *module_name, const char *name, int flags, void *privdata, int default_val);
void addModuleStringConfig(const char *module_name, const char *name, int flags, void *privdata, sds default_val);
void addModuleEnumConfig(const char *module_name, const char *name, int flags, void *privdata, int default_val, configEnum *enum_vals);
void addModuleNumericConfig(const char *module_name, const char *name, int flags, void *privdata, long long default_val, int conf_flags, long long lower, long long upper);
void addModuleConfigApply(list *module_configs, ModuleConfig *module_config);
int moduleConfigApplyConfig(list *module_configs, const char **err, const char **err_arg_name);
int getModuleBoolConfig(ModuleConfig *module_config);
int setModuleBoolConfig(ModuleConfig *config, int val, const char **err);
sds getModuleStringConfig(ModuleConfig *module_config);
int setModuleStringConfig(ModuleConfig *config, sds strval, const char **err);
int getModuleEnumConfig(ModuleConfig *module_config);
int setModuleEnumConfig(ModuleConfig *config, int val, const char **err);
long long getModuleNumericConfig(ModuleConfig *module_config);
int setModuleNumericConfig(ModuleConfig *config, long long val, const char **err);
/* db.c -- Keyspace access API */
int removeExpire(redisDb *db, robj *key);
void deleteExpiredKeyAndPropagate(redisDb *db, robj *keyobj);
void propagateDeletion(redisDb *db, robj *key, int lazy);
int keyIsExpired(redisDb *db, robj *key);
long long getExpire(redisDb *db, robj *key);
void setExpire(client *c, redisDb *db, robj *key, long long when);
int checkAlreadyExpired(long long when);
robj *lookupKeyRead(redisDb *db, robj *key);
robj *lookupKeyWrite(redisDb *db, robj *key);
robj *lookupKeyReadOrReply(client *c, robj *key, robj *reply);
robj *lookupKeyWriteOrReply(client *c, robj *key, robj *reply);
robj *lookupKeyReadWithFlags(redisDb *db, robj *key, int flags);
robj *lookupKeyWriteWithFlags(redisDb *db, robj *key, int flags);
robj *objectCommandLookup(client *c, robj *key);
robj *objectCommandLookupOrReply(client *c, robj *key, robj *reply);
int objectSetLRUOrLFU(robj *val, long long lfu_freq, long long lru_idle,
long long lru_clock, int lru_multiplier);
#define LOOKUP_NONE 0
#define LOOKUP_NOTOUCH (1<<0) /* Don't update LRU. */
#define LOOKUP_NONOTIFY (1<<1) /* Don't trigger keyspace event on key misses. */
#define LOOKUP_NOSTATS (1<<2) /* Don't update keyspace hits/misses counters. */
#define LOOKUP_WRITE (1<<3) /* Delete expired keys even in replicas. */
#define LOOKUP_NOEXPIRE (1<<4) /* Avoid deleting lazy expired keys. */
#define LOOKUP_NOEFFECTS (LOOKUP_NONOTIFY | LOOKUP_NOSTATS | LOOKUP_NOTOUCH | LOOKUP_NOEXPIRE) /* Avoid any effects from fetching the key */
void dbAdd(redisDb *db, robj *key, robj *val);
int dbAddRDBLoad(redisDb *db, sds key, robj *val);
void dbReplaceValue(redisDb *db, robj *key, robj *val);
#define SETKEY_KEEPTTL 1
#define SETKEY_NO_SIGNAL 2
#define SETKEY_ALREADY_EXIST 4
#define SETKEY_DOESNT_EXIST 8
#define SETKEY_ADD_OR_UPDATE 16 /* Key most likely doesn't exists */
void setKey(client *c, redisDb *db, robj *key, robj *val, int flags);
robj *dbRandomKey(redisDb *db);
int dbGenericDelete(redisDb *db, robj *key, int async, int flags);
int dbSyncDelete(redisDb *db, robj *key);
int dbDelete(redisDb *db, robj *key);
robj *dbUnshareStringValue(redisDb *db, robj *key, robj *o);
#define EMPTYDB_NO_FLAGS 0 /* No flags. */
#define EMPTYDB_ASYNC (1<<0) /* Reclaim memory in another thread. */
#define EMPTYDB_NOFUNCTIONS (1<<1) /* Indicate not to flush the functions. */
long long emptyData(int dbnum, int flags, void(callback)(dict*));
long long emptyDbStructure(redisDb *dbarray, int dbnum, int async, void(callback)(dict*));
void flushAllDataAndResetRDB(int flags);
long long dbTotalServerKeyCount(void);
redisDb *initTempDb(void);
void discardTempDb(redisDb *tempDb, void(callback)(dict*));
int selectDb(client *c, int id);
void signalModifiedKey(client *c, redisDb *db, robj *key);
void signalFlushedDb(int dbid, int async);
void scanGenericCommand(client *c, robj *o, unsigned long long cursor);
int parseScanCursorOrReply(client *c, robj *o, unsigned long long *cursor);
int dbAsyncDelete(redisDb *db, robj *key);
void emptyDbAsync(redisDb *db);
size_t lazyfreeGetPendingObjectsCount(void);
size_t lazyfreeGetFreedObjectsCount(void);
void lazyfreeResetStats(void);
void freeObjAsync(robj *key, robj *obj, int dbid);
void freeReplicationBacklogRefMemAsync(list *blocks, rax *index);
/* API to get key arguments from commands */
#define GET_KEYSPEC_DEFAULT 0
#define GET_KEYSPEC_INCLUDE_NOT_KEYS (1<<0) /* Consider 'fake' keys as keys */
#define GET_KEYSPEC_RETURN_PARTIAL (1<<1) /* Return all keys that can be found */
int getKeysFromCommandWithSpecs(struct redisCommand *cmd, robj **argv, int argc, int search_flags, getKeysResult *result);
keyReference *getKeysPrepareResult(getKeysResult *result, int numkeys);
int getKeysFromCommand(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int doesCommandHaveKeys(struct redisCommand *cmd);
int getChannelsFromCommand(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int doesCommandHaveChannelsWithFlags(struct redisCommand *cmd, int flags);
void getKeysFreeResult(getKeysResult *result);
int sintercardGetKeys(struct redisCommand *cmd,robj **argv, int argc, getKeysResult *result);
int zunionInterDiffGetKeys(struct redisCommand *cmd,robj **argv, int argc, getKeysResult *result);
int zunionInterDiffStoreGetKeys(struct redisCommand *cmd,robj **argv, int argc, getKeysResult *result);
int evalGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int functionGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int sortGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int sortROGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int migrateGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int georadiusGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int xreadGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int lmpopGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int blmpopGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int zmpopGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int bzmpopGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int setGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
int bitfieldGetKeys(struct redisCommand *cmd, robj **argv, int argc, getKeysResult *result);
unsigned short crc16(const char *buf, int len);
/* Sentinel */
void initSentinelConfig(void);
void initSentinel(void);
void sentinelTimer(void);
const char *sentinelHandleConfiguration(char **argv, int argc);
void queueSentinelConfig(sds *argv, int argc, int linenum, sds line);
void loadSentinelConfigFromQueue(void);
void sentinelIsRunning(void);
void sentinelCheckConfigFile(void);
void sentinelCommand(client *c);
void sentinelInfoCommand(client *c);
void sentinelPublishCommand(client *c);
void sentinelRoleCommand(client *c);
/* redis-check-rdb & aof */
int redis_check_rdb(char *rdbfilename, FILE *fp);
int redis_check_rdb_main(int argc, char **argv, FILE *fp);
int redis_check_aof_main(int argc, char **argv);
/* Scripting */
void scriptingInit(int setup);
int ldbRemoveChild(pid_t pid);
void ldbKillForkedSessions(void);
int ldbPendingChildren(void);
void luaLdbLineHook(lua_State *lua, lua_Debug *ar);
void freeLuaScriptsSync(dict *lua_scripts, list *lua_scripts_lru_list, lua_State *lua);
void freeLuaScriptsAsync(dict *lua_scripts, list *lua_scripts_lru_list, lua_State *lua);
void freeFunctionsAsync(functionsLibCtx *lib_ctx);
int ldbIsEnabled(void);
void ldbLog(sds entry);
void ldbLogRedisReply(char *reply);
void sha1hex(char *digest, char *script, size_t len);
unsigned long evalMemory(void);
dict* evalScriptsDict(void);
unsigned long evalScriptsMemory(void);
uint64_t evalGetCommandFlags(client *c, uint64_t orig_flags);
uint64_t fcallGetCommandFlags(client *c, uint64_t orig_flags);
int isInsideYieldingLongCommand(void);
typedef struct luaScript {
uint64_t flags;
robj *body;
listNode *node; /* list node in lua_scripts_lru_list list. */
} luaScript;
/* Cache of recently used small arguments to avoid malloc calls. */
#define LUA_CMD_OBJCACHE_SIZE 32
#define LUA_CMD_OBJCACHE_MAX_LEN 64
/* Blocked clients API */
void processUnblockedClients(void);
void initClientBlockingState(client *c);
void blockClient(client *c, int btype);
void unblockClient(client *c, int queue_for_reprocessing);
void unblockClientOnTimeout(client *c);
void unblockClientOnError(client *c, const char *err_str);
void queueClientForReprocessing(client *c);
void replyToBlockedClientTimedOut(client *c);
int getTimeoutFromObjectOrReply(client *c, robj *object, mstime_t *timeout, int unit);
void disconnectAllBlockedClients(void);
void handleClientsBlockedOnKeys(void);
void signalKeyAsReady(redisDb *db, robj *key, int type);
void blockForKeys(client *c, int btype, robj **keys, int numkeys, mstime_t timeout, int unblock_on_nokey);
void blockClientShutdown(client *c);
void blockPostponeClient(client *c);
void blockForReplication(client *c, mstime_t timeout, long long offset, long numreplicas);
void blockForAofFsync(client *c, mstime_t timeout, long long offset, int numlocal, long numreplicas);
void signalDeletedKeyAsReady(redisDb *db, robj *key, int type);
void updateStatsOnUnblock(client *c, long blocked_us, long reply_us, int had_errors);
void scanDatabaseForDeletedKeys(redisDb *emptied, redisDb *replaced_with);
void totalNumberOfStatefulKeys(unsigned long *blocking_keys, unsigned long *bloking_keys_on_nokey, unsigned long *watched_keys);
void blockedBeforeSleep(void);
/* timeout.c -- Blocked clients timeout and connections timeout. */
void addClientToTimeoutTable(client *c);
void removeClientFromTimeoutTable(client *c);
void handleBlockedClientsTimeout(void);
int clientsCronHandleTimeout(client *c, mstime_t now_ms);
/* expire.c -- Handling of expired keys */
void activeExpireCycle(int type);
void expireSlaveKeys(void);
void rememberSlaveKeyWithExpire(redisDb *db, robj *key);
void flushSlaveKeysWithExpireList(void);
size_t getSlaveKeyWithExpireCount(void);
/* evict.c -- maxmemory handling and LRU eviction. */
void evictionPoolAlloc(void);
#define LFU_INIT_VAL 5
unsigned long LFUGetTimeInMinutes(void);
uint8_t LFULogIncr(uint8_t value);
unsigned long LFUDecrAndReturn(robj *o);
#define EVICT_OK 0
#define EVICT_RUNNING 1
#define EVICT_FAIL 2
int performEvictions(void);
void startEvictionTimeProc(void);
/* Keys hashing / comparison functions for dict.c hash tables. */
uint64_t dictSdsHash(const void *key);
uint64_t dictSdsCaseHash(const void *key);
int dictSdsKeyCompare(dict *d, const void *key1, const void *key2);
int dictSdsKeyCaseCompare(dict *d, const void *key1, const void *key2);
void dictSdsDestructor(dict *d, void *val);
void dictListDestructor(dict *d, void *val);
void *dictSdsDup(dict *d, const void *key);
/* Git SHA1 */
char *redisGitSHA1(void);
char *redisGitDirty(void);
uint64_t redisBuildId(void);
const char *redisBuildIdRaw(void);
char *redisBuildIdString(void);
/* Commands prototypes */
void authCommand(client *c);
void pingCommand(client *c);
void echoCommand(client *c);
void commandCommand(client *c);
void commandCountCommand(client *c);
void commandListCommand(client *c);
void commandInfoCommand(client *c);
void commandGetKeysCommand(client *c);
void commandGetKeysAndFlagsCommand(client *c);
void commandHelpCommand(client *c);
void commandDocsCommand(client *c);
void setCommand(client *c);
void setnxCommand(client *c);
void setexCommand(client *c);
void psetexCommand(client *c);
void getCommand(client *c);
void getexCommand(client *c);
void getdelCommand(client *c);
void delCommand(client *c);
void unlinkCommand(client *c);
void existsCommand(client *c);
void setbitCommand(client *c);
void getbitCommand(client *c);
void bitfieldCommand(client *c);
void bitfieldroCommand(client *c);
void setrangeCommand(client *c);
void getrangeCommand(client *c);
void incrCommand(client *c);
void decrCommand(client *c);
void incrbyCommand(client *c);
void decrbyCommand(client *c);
void incrbyfloatCommand(client *c);
void selectCommand(client *c);
void swapdbCommand(client *c);
void randomkeyCommand(client *c);
void keysCommand(client *c);
void scanCommand(client *c);
void dbsizeCommand(client *c);
void lastsaveCommand(client *c);
void saveCommand(client *c);
void bgsaveCommand(client *c);
void bgrewriteaofCommand(client *c);
void shutdownCommand(client *c);
void slowlogCommand(client *c);
void moveCommand(client *c);
void copyCommand(client *c);
void renameCommand(client *c);
void renamenxCommand(client *c);
void lpushCommand(client *c);
void rpushCommand(client *c);
void lpushxCommand(client *c);
void rpushxCommand(client *c);
void linsertCommand(client *c);
void lpopCommand(client *c);
void rpopCommand(client *c);
void lmpopCommand(client *c);
void llenCommand(client *c);
void lindexCommand(client *c);
void lrangeCommand(client *c);
void ltrimCommand(client *c);
void typeCommand(client *c);
void lsetCommand(client *c);
void saddCommand(client *c);
void sremCommand(client *c);
void smoveCommand(client *c);
void sismemberCommand(client *c);
void smismemberCommand(client *c);
void scardCommand(client *c);
void spopCommand(client *c);
void srandmemberCommand(client *c);
void sinterCommand(client *c);
void sinterCardCommand(client *c);
void sinterstoreCommand(client *c);
void sunionCommand(client *c);
void sunionstoreCommand(client *c);
void sdiffCommand(client *c);
void sdiffstoreCommand(client *c);
void sscanCommand(client *c);
void syncCommand(client *c);
void flushdbCommand(client *c);
void flushallCommand(client *c);
void sortCommand(client *c);
void sortroCommand(client *c);
void lremCommand(client *c);
void lposCommand(client *c);
void rpoplpushCommand(client *c);
void lmoveCommand(client *c);
void infoCommand(client *c);
void mgetCommand(client *c);
void monitorCommand(client *c);
void expireCommand(client *c);
void expireatCommand(client *c);
void pexpireCommand(client *c);
void pexpireatCommand(client *c);
void getsetCommand(client *c);
void ttlCommand(client *c);
void touchCommand(client *c);
void pttlCommand(client *c);
void expiretimeCommand(client *c);
void pexpiretimeCommand(client *c);
void persistCommand(client *c);
void replicaofCommand(client *c);
void roleCommand(client *c);
void debugCommand(client *c);
void msetCommand(client *c);
void msetnxCommand(client *c);
void zaddCommand(client *c);
void zincrbyCommand(client *c);
void zrangeCommand(client *c);
void zrangebyscoreCommand(client *c);
void zrevrangebyscoreCommand(client *c);
void zrangebylexCommand(client *c);
void zrevrangebylexCommand(client *c);
void zcountCommand(client *c);
void zlexcountCommand(client *c);
void zrevrangeCommand(client *c);
void zcardCommand(client *c);
void zremCommand(client *c);
void zscoreCommand(client *c);
void zmscoreCommand(client *c);
void zremrangebyscoreCommand(client *c);
void zremrangebylexCommand(client *c);
void zpopminCommand(client *c);
void zpopmaxCommand(client *c);
void zmpopCommand(client *c);
void bzpopminCommand(client *c);
void bzpopmaxCommand(client *c);
void bzmpopCommand(client *c);
void zrandmemberCommand(client *c);
void multiCommand(client *c);
void execCommand(client *c);
void discardCommand(client *c);
void blpopCommand(client *c);
void brpopCommand(client *c);
void blmpopCommand(client *c);
void brpoplpushCommand(client *c);
void blmoveCommand(client *c);
void appendCommand(client *c);
void strlenCommand(client *c);
void zrankCommand(client *c);
void zrevrankCommand(client *c);
void hsetCommand(client *c);
void hsetnxCommand(client *c);
void hgetCommand(client *c);
void hmgetCommand(client *c);
void hdelCommand(client *c);
void hlenCommand(client *c);
void hstrlenCommand(client *c);
void zremrangebyrankCommand(client *c);
void zunionstoreCommand(client *c);
void zinterstoreCommand(client *c);
void zdiffstoreCommand(client *c);
void zunionCommand(client *c);
void zinterCommand(client *c);
void zinterCardCommand(client *c);
void zrangestoreCommand(client *c);
void zdiffCommand(client *c);
void zscanCommand(client *c);
void hkeysCommand(client *c);
void hvalsCommand(client *c);
void hgetallCommand(client *c);
void hexistsCommand(client *c);
void hscanCommand(client *c);
void hrandfieldCommand(client *c);
void configSetCommand(client *c);
void configGetCommand(client *c);
void configResetStatCommand(client *c);
void configRewriteCommand(client *c);
void configHelpCommand(client *c);
void hincrbyCommand(client *c);
void hincrbyfloatCommand(client *c);
void subscribeCommand(client *c);
void unsubscribeCommand(client *c);
void psubscribeCommand(client *c);
void punsubscribeCommand(client *c);
void publishCommand(client *c);
void pubsubCommand(client *c);
void spublishCommand(client *c);
void ssubscribeCommand(client *c);
void sunsubscribeCommand(client *c);
void watchCommand(client *c);
void unwatchCommand(client *c);
void clusterCommand(client *c);
void restoreCommand(client *c);
void migrateCommand(client *c);
void askingCommand(client *c);
void readonlyCommand(client *c);
void readwriteCommand(client *c);
int verifyDumpPayload(unsigned char *p, size_t len, uint16_t *rdbver_ptr);
void dumpCommand(client *c);
void objectCommand(client *c);
void memoryCommand(client *c);
void clientCommand(client *c);
void helloCommand(client *c);
void clientSetinfoCommand(client *c);
void evalCommand(client *c);
void evalRoCommand(client *c);
void evalShaCommand(client *c);
void evalShaRoCommand(client *c);
void scriptCommand(client *c);
void fcallCommand(client *c);
void fcallroCommand(client *c);
void functionLoadCommand(client *c);
void functionDeleteCommand(client *c);
void functionKillCommand(client *c);
void functionStatsCommand(client *c);
void functionListCommand(client *c);
void functionHelpCommand(client *c);
void functionFlushCommand(client *c);
void functionRestoreCommand(client *c);
void functionDumpCommand(client *c);
void timeCommand(client *c);
void bitopCommand(client *c);
void bitcountCommand(client *c);
void bitposCommand(client *c);
void replconfCommand(client *c);
void waitCommand(client *c);
void waitaofCommand(client *c);
void georadiusbymemberCommand(client *c);
void georadiusbymemberroCommand(client *c);
void georadiusCommand(client *c);
void georadiusroCommand(client *c);
void geoaddCommand(client *c);
void geohashCommand(client *c);
void geoposCommand(client *c);
void geodistCommand(client *c);
void geosearchCommand(client *c);
void geosearchstoreCommand(client *c);
void pfselftestCommand(client *c);
void pfaddCommand(client *c);
void pfcountCommand(client *c);
void pfmergeCommand(client *c);
void pfdebugCommand(client *c);
void latencyCommand(client *c);
void moduleCommand(client *c);
void securityWarningCommand(client *c);
void xaddCommand(client *c);
void xrangeCommand(client *c);
void xrevrangeCommand(client *c);
void xlenCommand(client *c);
void xreadCommand(client *c);
void xgroupCommand(client *c);
void xsetidCommand(client *c);
void xackCommand(client *c);
void xpendingCommand(client *c);
void xclaimCommand(client *c);
void xautoclaimCommand(client *c);
void xinfoCommand(client *c);
void xdelCommand(client *c);
void xtrimCommand(client *c);
void lolwutCommand(client *c);
void aclCommand(client *c);
void lcsCommand(client *c);
void quitCommand(client *c);
void resetCommand(client *c);
void failoverCommand(client *c);
#if defined(__GNUC__)
void *calloc(size_t count, size_t size) __attribute__ ((deprecated));
void free(void *ptr) __attribute__ ((deprecated));
void *malloc(size_t size) __attribute__ ((deprecated));
void *realloc(void *ptr, size_t size) __attribute__ ((deprecated));
#endif
/* Debugging stuff */
void _serverAssertWithInfo(const client *c, const robj *o, const char *estr, const char *file, int line);
void _serverAssert(const char *estr, const char *file, int line);
#ifdef __GNUC__
void _serverPanic(const char *file, int line, const char *msg, ...)
__attribute__ ((format (printf, 3, 4)));
#else
void _serverPanic(const char *file, int line, const char *msg, ...);
#endif
void serverLogObjectDebugInfo(const robj *o);
void setupDebugSigHandlers(void);
void setupSigSegvHandler(void);
void removeSigSegvHandlers(void);
const char *getSafeInfoString(const char *s, size_t len, char **tmp);
dict *genInfoSectionDict(robj **argv, int argc, char **defaults, int *out_all, int *out_everything);
void releaseInfoSectionDict(dict *sec);
sds genRedisInfoString(dict *section_dict, int all_sections, int everything);
sds genModulesInfoString(sds info);
void applyWatchdogPeriod(void);
void watchdogScheduleSignal(int period);
void serverLogHexDump(int level, char *descr, void *value, size_t len);
int memtest_preserving_test(unsigned long *m, size_t bytes, int passes);
void mixDigest(unsigned char *digest, const void *ptr, size_t len);
void xorDigest(unsigned char *digest, const void *ptr, size_t len);
sds catSubCommandFullname(const char *parent_name, const char *sub_name);
void commandAddSubcommand(struct redisCommand *parent, struct redisCommand *subcommand, const char *declared_name);
void debugDelay(int usec);
void killIOThreads(void);
void killThreads(void);
void makeThreadKillable(void);
void swapMainDbWithTempDb(redisDb *tempDb);
sds getVersion(void);
/* Use macro for checking log level to avoid evaluating arguments in cases log
* should be ignored due to low level. */
#define serverLog(level, ...) do {\
if (((level)&0xff) < server.verbosity) break;\
_serverLog(level, __VA_ARGS__);\
} while(0)
#define redisDebug(fmt, ...) \
printf("DEBUG %s:%d > " fmt "\n", __FILE__, __LINE__, __VA_ARGS__)
#define redisDebugMark() \
printf("-- MARK %s:%d --\n", __FILE__, __LINE__)
int iAmMaster(void);
#define STRINGIFY_(x) #x
#define STRINGIFY(x) STRINGIFY_(x)
#endif
Reference in New Issue View Git Blame Copy Permalink