misc:
- handle SSL_has_pending by iterating though these in beforeSleep, and setting timeout of 0 to aeProcessEvents
- fix issue with epoll signaling EPOLLHUP and EPOLLERR only to the write handlers. (needed to detect the rdb pipe was closed)
- add key-load-delay config for testing
- trim connShutdown which is no longer needed
- rioFdsetWrite -> rioFdWrite - simplified since there's no longer need to write to multiple FDs
- don't detect rdb child exited (don't call wait3) until we detect the pipe is closed
- Cleanup bad optimization from rio.c, add another one
* Introduce a connection abstraction layer for all socket operations and
integrate it across the code base.
* Provide an optional TLS connections implementation based on OpenSSL.
* Pull a newer version of hiredis with TLS support.
* Tests, redis-cli updates for TLS support.
* create module API for forking child processes.
* refactor duplicate code around creating and tracking forks by AOF and RDB.
* child processes listen to SIGUSR1 and dies exitFromChild in order to
eliminate a valgrind warning of unhandled signal.
* note that BGSAVE error reply has changed.
valgrind error is:
Process terminating with default action of signal 10 (SIGUSR1)
The implementation of the diskless replication was currently diskless only on the master side.
The slave side was still storing the received rdb file to the disk before loading it back in and parsing it.
This commit adds two modes to load rdb directly from socket:
1) when-empty
2) using "swapdb"
the third mode of using diskless slave by flushdb is risky and currently not included.
other changes:
--------------
distinguish between aof configuration and state so that we can re-enable aof only when sync eventually
succeeds (and not when exiting from readSyncBulkPayload after a failed attempt)
also a CONFIG GET and INFO during rdb loading would have lied
When loading rdb from the network, don't kill the server on short read (that can be a network error)
Fix rdb check when performed on preamble AOF
tests:
run replication tests for diskless slave too
make replication test a bit more aggressive
Add test for diskless load swapdb
However we should remove this fake client ad-hoc creation, and replace
it with the proper call to createClient(-1), and then adjust the fake
client as we like.
Related to #5201.
I removed the !!! Warning part since compared to the other errors, a
missing EXEC is in theory a normal happening in the AOF file, at least
in theory: may happen in a differnet number of situations, and it's
probably better to don't give the user the feeling that something really
bad happened.
A) slave buffers didn't count internal fragmentation and sds unused space,
this caused them to induce eviction although we didn't mean for it.
B) slave buffers were consuming about twice the memory of what they actually needed.
- this was mainly due to sdsMakeRoomFor growing to twice as much as needed each time
but networking.c not storing more than 16k (partially fixed recently in 237a38737).
- besides it wasn't able to store half of the new string into one buffer and the
other half into the next (so the above mentioned fix helped mainly for small items).
- lastly, the sds buffers had up to 30% internal fragmentation that was wasted,
consumed but not used.
C) inefficient performance due to starting from a small string and reallocing many times.
what i changed:
- creating dedicated buffers for reply list, counting their size with zmalloc_size
- when creating a new reply node from, preallocate it to at least 16k.
- when appending a new reply to the buffer, first fill all the unused space of the
previous node before starting a new one.
other changes:
- expose mem_not_counted_for_evict info field for the benefit of the test suite
- add a test to make sure slave buffers are counted correctly and that they don't cause eviction
Basically we cannot be sure that if the key is expired while writing the
AOF, the main thread will surely find the key expired. There are
possible race conditions like the moment at which the "now" is sampled,
and the fact that time may jump backward.
Think about the following:
SET a 5
EXPIRE a 1
AOF rewrite starts after about 1 second. The child process finds the key
expired, while in the main thread instead an INCR command is called
against the key "a" immediately after a fork, and the scheduler was
faster to give execution time to the main thread, so "a" is yet not
expired.
The main thread will generate an INCR a command to the AOF log that will
be appended to the rewritten AOF file, but that INCR command will target
a non existin "a" key, so a new non volatile key "a" will be created.
Two observations:
A) In theory by computing "now" before the fork, we should be sure that
if a key is expired at that time, it will be expired later when the
main thread will try to access to such key. However this does not take
into account the fact that the computer time may jump backward.
B) Technically we may still make the process safe by using a monotonic
time source.
However there were other similar related bugs, and in general the new
"vision" is that Redis persistence files should represent the memory
state without trying to be too smart: this makes the design more
consistent, bugs less likely to arise from complex interactions, and in
the end what is to fix is the Redis expire process to have less expired
keys in RAM.
Thanks to Oran Agra and Guy Benoish for writing me an email outlining
this problem, after they conducted a Redis 5 code review.
The AOF tail of a combined RDB+AOF is based on the premise of applying
the AOF commands to the exact state that there was in the server while
the RDB was persisted. By expiring keys while loading the RDB file, we
change the state, so applying the AOF tail later may change the state.
Test case:
* Time1: SET a 10
* Time2: EXPIREAT a $time5
* Time3: INCR a
* Time4: PERSIT A. Start bgrewiteaof with RDB preamble. The value of a is 11 without expire time.
* Time5: Restart redis from the RDB+AOF: consistency violation.
Thanks to @soloestoy for providing the patch.
Thanks to @trevor211 for the original issue report and the initial fix.
Check issue #4950 for more info.
It is possible to do BGREWRITEAOF even if appendonly=no. This is by design.
stopAppendonly() didn't turn off aof_rewrite_scheduled (it can be turned on
again by BGREWRITEAOF even while appendonly is off anyway).
After configuring `appendonly yes` it will see that the state is AOF_OFF,
there's no RDB fork, so it will do rewriteAppendOnlyFileBackground() which
will fail since the aof_child_pid is set (was scheduled and started by cron).
Solution:
stopAppendonly() will turn off the schedule flag (regardless of who asked for it).
startAppendonly() will terminate any existing fork and start a new one (so it is the most recent).
The gist of the changes is that now, partial resynchronizations between
slaves and masters (without the need of a full resync with RDB transfer
and so forth), work in a number of cases when it was impossible
in the past. For instance:
1. When a slave is promoted to mastrer, the slaves of the old master can
partially resynchronize with the new master.
2. Chained slalves (slaves of slaves) can be moved to replicate to other
slaves or the master itsef, without requiring a full resync.
3. The master itself, after being turned into a slave, is able to
partially resynchronize with the new master, when it joins replication
again.
In order to obtain this, the following main changes were operated:
* Slaves also take a replication backlog, not just masters.
* Same stream replication for all the slaves and sub slaves. The
replication stream is identical from the top level master to its slaves
and is also the same from the slaves to their sub-slaves and so forth.
This means that if a slave is later promoted to master, it has the
same replication backlong, and can partially resynchronize with its
slaves (that were previously slaves of the old master).
* A given replication history is no longer identified by the `runid` of
a Redis node. There is instead a `replication ID` which changes every
time the instance has a new history no longer coherent with the past
one. So, for example, slaves publish the same replication history of
their master, however when they are turned into masters, they publish
a new replication ID, but still remember the old ID, so that they are
able to partially resynchronize with slaves of the old master (up to a
given offset).
* The replication protocol was slightly modified so that a new extended
+CONTINUE reply from the master is able to inform the slave of a
replication ID change.
* REPLCONF CAPA is used in order to notify masters that a slave is able
to understand the new +CONTINUE reply.
* The RDB file was extended with an auxiliary field that is able to
select a given DB after loading in the slave, so that the slave can
continue receiving the replication stream from the point it was
disconnected without requiring the master to insert "SELECT" statements.
This is useful in order to guarantee the "same stream" property, because
the slave must be able to accumulate an identical backlog.
* Slave pings to sub-slaves are now sent in a special form, when the
top-level master is disconnected, in order to don't interfer with the
replication stream. We just use out of band "\n" bytes as in other parts
of the Redis protocol.
An old design document is available here:
https://gist.github.com/antirez/ae068f95c0d084891305
However the implementation is not identical to the description because
during the work to implement it, different changes were needed in order
to make things working well.
It was noted by @dvirsky that it is not possible to use string functions
when writing the AOF file. This sometimes is critical since the command
rewriting may need to be built in the context of the AOF callback, and
without access to the context, and the limited types that the AOF
production functions will accept, this can be an issue.
Moreover there are other needs that we can't anticipate regarding the
ability to use Redis Modules APIs using the context in order to build
representations to emit AOF / RDB.
Because of this a new API was added that allows the user to get a
temporary context from the IO context. The context is auto released
if obtained when the RDB / AOF callback returns.
Calling multiple time the function to get the context, always returns
the same one, since it is invalid to have more than a single context.
This patch, written in collaboration with Oran Agra (@oranagra) is a companion
to 780a8b1. Together the two patches should avoid that the AOF and RDB saving
processes can be spawned at the same time. Previously conditions that
could lead to two saving processes at the same time were:
1. When AOF is enabled via CONFIG SET and an RDB saving process is
already active.
2. When the SYNC command decides to start an RDB saving process ASAP in
order to serve a new slave that cannot partially resynchronize (but
only if we have a disk target for replication, for diskless
replication there is not such a problem).
Condition "1" is not very severe but "2" can happen often and is
definitely good at degrading Redis performances in an unexpected way.
The two commits have the effect of always spawning RDB savings for
replication in replicationCron() instead of attempting to start an RDB
save synchronously. Moreover when a BGSAVE or AOF rewrite must be
performed, they are instead just postponed using flags that will try to
perform such operations ASAP.
Finally the BGSAVE command was modified in order to accept a SCHEDULE
option so that if an AOF rewrite is in progress, when this option is
given, the command no longer returns an error, but instead schedules an
RDB rewrite operation for when it will be possible to start it.
The cleanup code expects that if 'di' is not NULL, it is a valid
iterator that should be freed.
The result of this bug was a crash of the AOF rewriting process if an
error occurred after the DBs data are written and the iterator is no
longer valid.
This replaces individual ziplist vs. linkedlist representations
for Redis list operations.
Big thanks for all the reviews and feedback from everybody in
https://github.com/antirez/redis/pull/2143
- Remove trailing newlines from redis.conf
- Fix comment misspelling
- Clarifies zipEncodeLength usage and a C API mention (#1243, #1242)
- Fix cluster typos (inspired by @papanikge #1507)
- Fix rewite -> rewrite in a few places (inspired by #682)
Closes#1243, #1242, #1507
It is not clear if files open in append only mode will automatically fix
their offset after a truncate(2) operation. This commit makes sure that
we reposition the AOF file descriptor offset at the end of the file
after a truncated AOF is loaded and trimmed to the last valid command.
Recently we introduced the ability to load truncated AOFs, but
unfortuantely the support was broken since the server, after loading the
truncated AOF, continues appending to the file that is corrupted at the
end. The problem is fixed only in the next AOF rewrite.
This commit fixes the issue by truncating the AOF to the last valid
opcode, and aborting if it is not possible to truncate the file
correctly.
Because of the new ability to start with a truncated AOF, we need
to correctly release all the memory on EOF error. Otherwise there is a
small leak, that is not really a problem, but causes a false positive in
the tests that detect memory leaks.
We now wait up to 1 second for diff data to come from the parent,
however we use poll(2) to wait for more data, and use a counter of
contiguous failures to get data for N times (set to 20 experimentally
after different tests) as an early stop condition to avoid wasting 1
second when the write traffic is too low.
