In replica, the key expired before master's `INCR` was arrived, so INCR
creates a new key in the replica and the test failed.
```
*** [err]: Replication of an expired key does not delete the expired key in tests/integration/replication-4.tcl
Expected '0' to be equal to '1' (context: type eval line 13 cmd {assert_equal 0 [$slave exists k]} proc ::test)
```
This test is very likely to do a false positive if the `wait_for_ofs_sync`
takes longer than the expiration time, so give it a few more chances.
The test was introduced in #9572.
Add an option "withscores" to ZRANK and ZREVRANK.
Add `[withscore]` option to both `zrank` and `zrevrank`, like this:
```
z[rev]rank key member [withscore]
```
The cluster-announce-port/cluster-announce-bus-port/cluster-announce-tls-port should take effect at runtime
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
### Summary of API additions
* `RedisModule_AddPostNotificationJob` - new API to call inside a key space
notification (and on more locations in the future) and allow to add a post job as describe above.
* New module option, `REDISMODULE_OPTIONS_ALLOW_NESTED_KEYSPACE_NOTIFICATIONS`,
allows to disable Redis protection of nested key-space notifications.
* `RedisModule_GetModuleOptionsAll` - gets the mask of all supported module options so a module
will be able to check if a given option is supported by the current running Redis instance.
### Background
The following PR is a proposal of handling write operations inside module key space notifications.
After a lot of discussions we came to a conclusion that module should not perform any write
operations on key space notification.
Some examples of issues that such write operation can cause are describe on the following links:
* Bad replication oreder - https://github.com/redis/redis/pull/10969
* Used after free - https://github.com/redis/redis/pull/10969#issuecomment-1223771006
* Used after free - https://github.com/redis/redis/pull/9406#issuecomment-1221684054
There are probably more issues that are yet to be discovered. The underline problem with writing
inside key space notification is that the notification runs synchronously, this means that the notification
code will be executed in the middle on Redis logic (commands logic, eviction, expire).
Redis **do not assume** that the data might change while running the logic and such changes
can crash Redis or cause unexpected behaviour.
The solution is to state that modules **should not** perform any write command inside key space
notification (we can chose whether or not we want to force it). To still cover the use-case where
module wants to perform a write operation as a reaction to key space notifications, we introduce
a new API , `RedisModule_AddPostNotificationJob`, that allows to register a callback that will be
called by Redis when the following conditions hold:
* It is safe to perform any write operation.
* The job will be called atomically along side the operation that triggers it (in our case, key
space notification).
Module can use this new API to safely perform any write operation and still achieve atomicity
between the notification and the write.
Although currently the API is supported on key space notifications, the API is written in a generic
way so that in the future we will be able to use it on other places (server events for example).
### Technical Details
Whenever a module uses `RedisModule_AddPostNotificationJob` the callback is added to a list
of callbacks (called `modulePostExecUnitJobs`) that need to be invoke after the current execution
unit ends (whether its a command, eviction, or active expire). In order to trigger those callback
atomically with the notification effect, we call those callbacks on `postExecutionUnitOperations`
(which was `propagatePendingCommands` before this PR). The new function fires the post jobs
and then calls `propagatePendingCommands`.
If the callback perform more operations that triggers more key space notifications. Those keys
space notifications might register more callbacks. Those callbacks will be added to the end
of `modulePostExecUnitJobs` list and will be invoke atomically after the current callback ends.
This raises a concerns of entering an infinite loops, we consider infinite loops as a logical bug
that need to be fixed in the module, an attempt to protect against infinite loops by halting the
execution could result in violation of the feature correctness and so **Redis will make no attempt
to protect the module from infinite loops**
In addition, currently key space notifications are not nested. Some modules might want to allow
nesting key-space notifications. To allow that and keep backward compatibility, we introduce a
new module option called `REDISMODULE_OPTIONS_ALLOW_NESTED_KEYSPACE_NOTIFICATIONS`.
Setting this option will disable the Redis key-space notifications nesting protection and will
pass this responsibility to the module.
### Redis infrastructure
This PR promotes the existing `propagatePendingCommands` to an "Execution Unit" concept,
which is called after each atomic unit of execution,
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
Command SENTINEL DEBUG could be no arguments, which display all
configurable arguments and their values.
Update the command arguments in the docs (json file) to indicate that
arguments are optional
This PR add `assert_refcount_morethan`, and modify `assert_refcount` to skip
the `OBJECT REFCOUNT` check with `needs:debug` flag. Use them to modify all
`OBJECT REFCOUNT` calls and also update the tests/README to be more specific.
The reasoning is that some of these tests could be testing something important,
and along the way also add a check for the refcount, and it could be a shame to skip
the whole test just because the refcount functionality is missing or blocked.
but much like the fact that some redis variants may not support DEBUG,
and still we want to run the majority of the test for coverage, and just skip the digest match.
This payload produces a set with duplicate elements (listpack encoding):
```
restore _key 0 "\x14\x25\x25\x00\x00\x00\x0A\x00\x06\x01\x82\x5F\x35\x03\x04\x01\x82\x5F\x31\x03\x82\x5F\x33\x03\x00\x01\x82\x5F\x39\x03\x82\x5F\x33\x03\x08\x01\x02\x01\xFF\x0B\x00\x31\xBE\x7D\x41\x01\x03\x5B\xEC"
smembers key
1) "6"
2) "_5"
3) "4"
4) "_1"
5) "_3" ---> dup
6) "0"
7) "_9"
8) "_3" ---> dup
9) "8"
10) "2"
```
This kind of sets will cause SDIFF to hang, SDIFF generated a broken
protocol and left the client hung. (Expected ten elements, but only
got nine elements due to the duplication.)
If we set `sanitize-dump-payload` to yes, we will be able to find
the duplicate elements and report "ERR Bad data format".
Discovered and discussed in #11290.
This PR also improve prints when corrupt-dump-fuzzer hangs, it will
print the cmds and the payload, an example like:
```
Testing integration/corrupt-dump-fuzzer
[TIMEOUT]: clients state report follows.
sock6 => (SPAWNED SERVER) pid:28884
Killing still running Redis server 28884
commands caused test to hang:
SDIFF __key
payload that caused test to hang: "\x14\balabala"
```
Co-authored-by: Oran Agra <oran@redislabs.com>
Apparently we used to set `loglevel debug` for tls in spawn_instance.
I.e. cluster and sentinel tests used to run with debug logging, only when tls mode was enabled.
this was probably a leftover from when creating the tls mode tests.
it cause a new test created for #11214 to fail in tls mode.
At the same time, in order to better distinguish the tests, change the
name of `test-centos7-tls` to `test-centos7-tls-module`, change the name
of `test-centos7-tls-no-tls` to `test-centos7-tls-module-no-tls`.
Note that in `test-centos7-tls-module`, we did not pass `--tls-module`
in sentinel test because it is not supported, see 4faddf1, added in #9320.
So only `test-ubuntu-tls` fails in daily CI.
Co-authored-by: Oran Agra <oran@redislabs.com>
The following example will create an empty set (listpack encoding):
```
> RESTORE key 0
"\x14\x25\x25\x00\x00\x00\x00\x00\x02\x01\x82\x5F\x37\x03\x06\x01\x82\x5F\x35\x03\x82\x5F\x33\x03\x00\x01\x82\x5F\x31\x03\x82\x5F\x39\x03\x04\xA9\x08\x01\xFF\x0B\x00\xA3\x26\x49\xB4\x86\xB0\x0F\x41"
OK
> SCARD key
(integer) 0
> SRANDMEMBER key
Error: Server closed the connection
```
In the spirit of #9297, skip empty set when loading RDB_TYPE_SET_LISTPACK.
Introduced in #11290
Introduce Shard IDs to logically group nodes in cluster mode.
1. Added a new "shard_id" field to "cluster nodes" output and nodes.conf after "hostname"
2. Added a new PING extension to propagate "shard_id"
3. Handled upgrade from pre-7.2 releases automatically
4. Refactored PING extension assembling/parsing logic
Behavior of Shard IDs:
Replicas will always follow the shards of their reported primaries. If a primary updates its shard ID, the replica will follow. (This need not follow for cluster v2) This is not an expected use case.
Improve memory efficiency of list keys
## Description of the feature
The new listpack encoding uses the old `list-max-listpack-size` config
to perform the conversion, which we can think it of as a node inside a
quicklist, but without 80 bytes overhead (internal fragmentation included)
of quicklist and quicklistNode structs.
For example, a list key with 5 items of 10 chars each, now takes 128 bytes
instead of 208 it used to take.
## Conversion rules
* Convert listpack to quicklist
When the listpack length or size reaches the `list-max-listpack-size` limit,
it will be converted to a quicklist.
* Convert quicklist to listpack
When a quicklist has only one node, and its length or size is reduced to half
of the `list-max-listpack-size` limit, it will be converted to a listpack.
This is done to avoid frequent conversions when we add or remove at the bounding size or length.
## Interface changes
1. add list entry param to listTypeSetIteratorDirection
When list encoding is listpack, `listTypeIterator->lpi` points to the next entry of current entry,
so when changing the direction, we need to use the current node (listTypeEntry->p) to
update `listTypeIterator->lpi` to the next node in the reverse direction.
## Benchmark
### Listpack VS Quicklist with one node
* LPUSH - roughly 0.3% improvement
* LRANGE - roughly 13% improvement
### Both are quicklist
* LRANGE - roughly 3% improvement
* LRANGE without pipeline - roughly 3% improvement
From the benchmark, as we can see from the results
1. When list is quicklist encoding, LRANGE improves performance by <5%.
2. When list is listpack encoding, LRANGE improves performance by ~13%,
the main enhancement is brought by `addListListpackRangeReply()`.
## Memory usage
1M lists(key:0~key:1000000) with 5 items of 10 chars ("hellohello") each.
shows memory usage down by 35.49%, from 214MB to 138MB.
## Note
1. Add conversion callback to support doing some work before conversion
Since the quicklist iterator decompresses the current node when it is released, we can
no longer decompress the quicklist after we convert the list.
Both functions and eval are marked as "no-monitor", since we want to explicitly feed in the script command before the commands generated by the script. Note that we want this behavior generally, so that commands can redact arguments before being added to the monitor.
The test introduced in #11482 fail on ARM (extra CI):
```
*** [err]: RESP2: RM_ReplyWithDouble: NaN in tests/unit/moduleapi/reply.tcl
Expected '-nan' to be equal to 'nan' (context: type eval line 3 cmd
{assert_equal "-nan" [r rw.double 0 0]} proc ::test)
*** [err]: RESP3: RM_ReplyWithDouble: NaN in tests/unit/moduleapi/reply.tcl
Expected ',-nan' to be equal to ',nan' (context: type eval line 8 cmd
{assert_equal ",-nan" [r rw.double 0 0]} proc ::test)
```
It looks like there is no negative nan on ARM.
In moduleFireServerEvent we change the real client DB to 0 on freeClient in case the event is REDISMODULE_EVENT_CLIENT_CHANGE.
It results in a crash if the client is blocked on a key on other than DB 0.
The DB change is not necessary even for module-client, as we set its DB to 0 on either createClient or moduleReleaseTempClient.
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
The test introduced in #11482 fail on mac:
```
*** [err]: RESP3: RM_ReplyWithDouble: inf in tests/unit/moduleapi/reply.tcl
Expected 'Inf' to be equal to 'inf'
(context: type eval line 6 cmd {assert_equal Inf [r rw.double inf]} proc ::test)
```
Looks like the mac platform returns inf instead of Inf in this case, this PR
uses readraw to verify the protocol.
Adding a test to cover the already existing behavior of NAN replies,
to accompany the PR that adds them to the RESP3 spec:
https://github.com/redis/redis-specifications/pull/10
This PR also covers Inf replies that are already in the spec, as well as RESP2 coverage.
Fix a few issues with the recent #11463
* use exitFromChild instead of exit
* test should ignore defunct process since that's what we expect to
happen for thees child processes when the parent dies.
* fix typo
Co-authored-by: Binbin <binloveplay1314@qq.com>
Small sets with not only integer elements are listpack encoded, by default
up to 128 elements, max 64 bytes per element, new config `set-max-listpack-entries`
and `set-max-listpack-value`. This saves memory for small sets compared to using a hashtable.
Sets with only integers, even very small sets, are still intset encoded (up to 1G
limit, etc.). Larger sets are hashtable encoded.
This PR increments the RDB version, and has an effect on OBJECT ENCODING
Possible conversions when elements are added:
intset -> listpack
listpack -> hashtable
intset -> hashtable
Note: No conversion happens when elements are deleted. If all elements are
deleted and then added again, the set is deleted and recreated, thus implicitly
converted to a smaller encoding.
During a diskless sync, if the master main process crashes, the child would
have hung in `write`. This fix closes the read fd on the child side, so that if the
parent crashes, the child will get a write error and exit.
This change also fixes disk-based replication, BGSAVE and AOFRW.
In that case the child wouldn't have been hang, it would have just kept
running until done which may be pointless.
There is a certain degree of risk here. in case there's a BGSAVE child that could
maybe succeed and the parent dies for some reason, the old code would have let
the child keep running and maybe succeed and avoid data loss.
On the other hand, if the parent is restarted, it would have loaded an old rdb file
(or none), and then the child could reach the end and rename the rdb file (data
conflicting with what the parent has), or also have a race with another BGSAVE
child that the new parent started.
Note that i removed a comment saying a write error will be ignored in the child
and handled by the parent (this comment was very old and i don't think relevant).
Introduce socket `shutdown()` into connection type, and use it
on normal socket if a fork is active. This allows us to close
client connections when there are child processes sharing the
file descriptors.
Fixes#10077. The reason is that since the `fork()` child is holding
the file descriptors, the `close` in `unlinkClient -> connClose`
isn't sufficient. The client will not realize that the connection is
disconnected until the child process ends.
Let's try to be conservative and only use shutdown when the fork is active.
Today we don't place any specific restrictions on module command names.
This can cause ambiguous scenarios. For example, someone might name a
command like "module|feature" which would be incorrectly parsed by the
ACL system as a subcommand.
In this PR, we will block some chars that we know can mess things up.
Specifically ones that can appear ok at first and cause problems in some
cases (we rather surface the issue right away).
There are these characters:
* ` ` (space) - issues with old inline protocol.
* `\r`, `\n` (newline) - can mess up the protocol on acl error replies.
* `|` - sub-commands.
* `@` - ACL categories
* `=`, `,` - info and client list fields.
note that we decided to leave `:` out as it's handled by `getSafeInfoString`
and is more likely to already been used by existing modules.
Resolve an edge case where the ID of a stream is updated retroactively
to an ID lower than the already set max_deleted_entry_id.
Currently, if we have command as below:
**xsetid mystream 1-1 MAXDELETEDID 1-2**
Then we will get the following error:
**(error) ERR The ID specified in XSETID is smaller than the provided max_deleted_entry_id**
Becuase the provided MAXDELETEDID 1-2 is greated than input last-id: 1-1
Then we could assume there is a similar situation:
step 1: we add three items in the mystream
**127.0.0.1:6381> xadd mystream 1-1 a 1
"1-1"
127.0.0.1:6381> xadd mystream 1-2 b 2
"1-2"
127.0.0.1:6381> xadd mystream 1-3 c 3
"1-3"**
step 2: we could check the mystream infomation as below:
**127.0.0.1:6381> xinfo stream mystream
1) "length"
2) (integer) 3
7) "last-generated-id"
8) "1-3"
9) "max-deleted-entry-id"
10) "0-0"
step 3: we delete the item id 1-2 and 1-3 as below:
**127.0.0.1:6381> xdel mystream 1-2
(integer) 1
127.0.0.1:6381> xdel mystream 1-3
(integer) 1**
step 4: we check the mystream information:
127.0.0.1:6381> xinfo stream mystream
1) "length"
2) (integer) 1
7) "last-generated-id"
8) "1-3"
9) "max-deleted-entry-id"
10) "1-3"
we could notice that the **max-deleted-entry-id update to 1-3**, so right now, if we just run:
**xsetid mystream 1-2**
the above command has the same effect with **xsetid mystream 1-2 MAXDELETEDID 1-3**
So we should return an error to the client that **(error) ERR The ID specified in XSETID is smaller than current max_deleted_entry_id**
According to the source code, the commands can be executed with only key name,
and no GET/SET/INCR operation arguments.
change the docs to reflect that by marking these arguments as optional.
also add tests.
Renamed from "Pause Clients" to "Pause Actions" since the mechanism can pause
several actions in redis, not just clients (e.g. eviction, expiration).
Previously each pause purpose (which has a timeout that's tracked separately from others purposes),
also implicitly dictated what it pauses (reads, writes, eviction, etc). Now it is explicit, and
the actions that are paused (bit flags) are defined separately from the purpose.
- Previously, when using feature pause-client it also implicitly means to make the server static:
- Pause replica traffic
- Pauses eviction processing
- Pauses expire processing
Making the server static is used also for failover and shutdown. This PR internally rebrand
pause-client API to become pause-action API. It also Simplifies pauseClients structure
by replacing pointers array with static array.
The context of this PR is to add another trigger to pause-client which will activated in case
of OOM as throttling mechanism ([see here](https://github.com/redis/redis/issues/10907)).
In this case we want only to pause client, and eviction actions.
RM_Call is designed to let modules call redis commands disregarding the
OOM state (the module is responsible to declare its command flags to redis,
or perform the necessary checks).
The other (new) alternative is to pass the "M" flag to RM_Call so that redis can
OOM reject commands implicitly.
However, Currently, RM_Call enforces OOM on scripts (excluding scripts that
declared `allow-oom`) in all cases, regardless of the RM_Call "M" flag being present.
This PR fixes scripts to be consistent with other commands being executed by RM_Call.
It modifies the flow in effect treats scripts as if they if they have the ALLOW_OOM script
flag, if the "M" flag is not passed (i.e. no OOM checking is being performed by RM_Call,
so no OOM checking should be done on script).
Co-authored-by: Oran Agra <oran@redislabs.com>
This is a rare failure mode of a new feature of redis 7 introduced in #9217
(when the incremental part of the ID overflows).
Till now, the outcome of that error was undetermined (could easily result in
`Elements are too large to be stored` wrongly, due to unset `errno`).
The following two cases will create an empty destkey HLL:
1. called with no source keys, like `pfmerge destkey`
2. called with non-existing source keys, like `pfmerge destkey non-existing-source-key`
In the first case, in `PFMERGE`, the dest key is actually one of the source keys too.
So `PFMERGE k1 k2` is equivalent to `SUNIONSTORE k1 k1 k2`,
and `PFMERGE k1` is equivalent to `SUNIONSTORE k1 k1`.
So the first case is reasonable, the source key is actually optional.
And the second case, `PFMERGE` on missing keys should succeed and create an empty dest.
This is consistent with `PFCOUNT`, and also with `SUNIONSTORE`, no need to change.
In the module, we will reuse the list iterator entry for RM_ListDelete, but `listTypeDelete` will only update
`quicklistEntry->zi` but not `quicklistEntry->node`, which will result in `quicklistEntry->node` pointing to
a freed memory address if the quicklist node is deleted.
This PR sync `key->u.list.index` and `key->u.list.entry` to list iterator after `RM_ListDelete`.
This PR also optimizes the release code of the original list iterator.
Co-authored-by: Viktor Söderqvist <viktor@zuiderkwast.se>
The use case is a module that wants to implement a blocking command on a key that
necessarily exists and wants to unblock the client in case the key is deleted (much like
what we implemented for XREADGROUP in #10306)
New module API:
* RedisModule_BlockClientOnKeysWithFlags
Flags:
* REDISMODULE_BLOCK_UNBLOCK_NONE
* REDISMODULE_BLOCK_UNBLOCK_DELETED
### Detailed description of code changes
blocked.c:
1. Both module and stream functions are called whether the key exists or not, regardless of
its type. We do that in order to allow modules/stream to unblock the client in case the key
is no longer present or has changed type (the behavior for streams didn't change, just code
that moved into serveClientsBlockedOnStreamKey)
2. Make sure afterCommand is called in serveClientsBlockedOnKeyByModule, in order to propagate
actions from moduleTryServeClientBlockedOnKey.
3. handleClientsBlockedOnKeys: call propagatePendingCommands directly after lookupKeyReadWithFlags
to prevent a possible lazy-expire DEL from being mixed with any command propagated by the
preceding functions.
4. blockForKeys: Caller can specifiy that it wants to be awakened if key is deleted.
Minor optimizations (use dictAddRaw).
5. signalKeyAsReady became signalKeyAsReadyLogic which can take a boolean in case the key is deleted.
It will only signal if there's at least one client that awaits key deletion (to save calls to
handleClientsBlockedOnKeys).
Minor optimizations (use dictAddRaw)
db.c:
1. scanDatabaseForDeletedStreams is now scanDatabaseForDeletedKeys and will signalKeyAsReady
for any key that was removed from the database or changed type. It is the responsibility of the code
in blocked.c to ignore or act on deleted/type-changed keys.
2. Use the new signalDeletedKeyAsReady where needed
blockedonkey.c + tcl:
1. Added test of new capabilities (FSL.BPOPGT now requires the key to exist in order to work)
### Background
The issue is that when saving an RDB with module AUX data, the module AUX metadata
(moduleid, when, ...) is saved to the RDB even though the module did not saved any actual data.
This prevent loading the RDB in the absence of the module (although there is no actual data in
the RDB that requires the module to be loaded).
### Solution
The solution suggested in this PR is that module AUX will be saved on the RDB only if the module
actually saved something during `aux_save` function.
To support backward compatibility, we introduce `aux_save2` callback that acts the same as
`aux_save` with the tiny change of avoid saving the aux field if no data was actually saved by
the module. Modules can use the new API to make sure that if they have no data to save,
then it will be possible to load the created RDB even without the module.
### Concerns
A module may register for the aux load and save hooks just in order to be notified when
saving or loading starts or completed (there are better ways to do that, but it still possible
that someone used it).
However, if a module didn't save a single field in the save callback, it means it's not allowed
to read in the read callback, since it has no way to distinguish between empty and non-empty
payloads. furthermore, it means that if the module did that, it must never change it, since it'll
break compatibility with it's old RDB files, so this is really not a valid use case.
Since some modules (ones who currently save one field indicating an empty payload), need
to know if saving an empty payload is valid, and if Redis is gonna ignore an empty payload
or store it, we opted to add a new API (rather than change behavior of an existing API and
expect modules to check the redis version)
### Technical Details
To avoid saving AUX data on RDB, we change the code to first save the AUX metadata
(moduleid, when, ...) into a temporary buffer. The buffer is then flushed to the rio at the first
time the module makes a write operation inside the `aux_save` function. If the module saves
nothing (and `aux_save2` was used), the entire temporary buffer is simply dropped and no
data about this AUX field is saved to the RDB. This make it possible to load the RDB even in
the absence of the module.
Test was added to verify the fix.
Motivation: for applications that use RM ACL verification functions, they would
want to return errors back to the user, in ways that are consistent with Redis.
While investigating how we should return ACL errors to the user, we realized that
Redis isn't consistent, and currently returns ACL error strings in 3 primary ways.
[For the actual implications of this change, see the "Impact" section at the bottom]
1. how it returns an error when calling a command normally
ACL_DENIED_CMD -> "this user has no permissions to run the '%s' command"
ACL_DENIED_KEY -> "this user has no permissions to access one of the keys used as arguments"
ACL_DENIED_CHANNEL -> "this user has no permissions to access one of the channels used as arguments"
2. how it returns an error when calling via 'acl dryrun' command
ACL_DENIED_CMD -> "This user has no permissions to run the '%s' command"
ACL_DENIED_KEY -> "This user has no permissions to access the '%s' key"
ACL_DENIED_CHANNEL -> "This user has no permissions to access the '%s' channel"
3. how it returns an error via RM_Call (and scripting is similar).
ACL_DENIED_CMD -> "can't run this command or subcommand";
ACL_DENIED_KEY -> "can't access at least one of the keys mentioned in the command arguments";
ACL_DENIED_CHANNEL -> "can't publish to the channel mentioned in the command";
In addition, if one wants to use RM_Call's "dry run" capability instead of the RM ACL
functions directly, one also sees a different problem than it returns ACL errors with a -ERR,
not a -PERM, so it can't be returned directly to the caller.
This PR modifies the code to generate a base message in a common manner with the ability
to set verbose flag for acl dry run errors, and keep it unset for normal/rm_call/script cases
```c
sds getAclErrorMessage(int acl_res, user *user, struct redisCommand *cmd, sds errored_val, int verbose) {
switch (acl_res) {
case ACL_DENIED_CMD:
return sdscatfmt(sdsempty(), "User %S has no permissions to run "
"the '%S' command", user->name, cmd->fullname);
case ACL_DENIED_KEY:
if (verbose) {
return sdscatfmt(sdsempty(), "User %S has no permissions to access "
"the '%S' key", user->name, errored_val);
} else {
return sdsnew("No permissions to access a key");
}
case ACL_DENIED_CHANNEL:
if (verbose) {
return sdscatfmt(sdsempty(), "User %S has no permissions to access "
"the '%S' channel", user->name, errored_val);
} else {
return sdsnew("No permissions to access a channel");
}
}
```
The caller can append/prepend the message (adding NOPERM for normal/RM_Call or indicating it's within a script).
Impact:
- Plain commands, as well as scripts and RM_Call now include the user name.
- ACL DRYRUN remains the only one that's verbose (mentions the offending channel or key name)
- Changes RM_Call ACL errors from being a `-ERR` to being `-NOPERM` (besides for textual changes)
**This somewhat a breaking change, but it only affects the RM_Call with both `C` and `E`, or `D`**
- Changes ACL errors in scripts textually from being
`The user executing the script <old non unified text>`
to
`ACL failure in script: <new unified text>`
As discussed on #11084, `propagatePendingCommands` should happened after the del
notification is fired so that the notification effect and the `del` will be replicated inside MULTI EXEC.
Test was added to verify the fix.
All commands / use cases that heavily rely on double to a string representation conversion,
(e.g. meaning take a double-precision floating-point number like 1.5 and return a string like "1.5" ),
could benefit from a performance boost by swapping snprintf(buf,len,"%.17g",value) by the
equivalent [fpconv_dtoa](https://github.com/night-shift/fpconv) or any other algorithm that ensures
100% coverage of conversion.
This is a well-studied topic and Projects like MongoDB. RedPanda, PyTorch leverage libraries
( fmtlib ) that use the optimized double to string conversion underneath.
The positive impact can be substantial. This PR uses the grisu2 approach ( grisu explained on
https://www.cs.tufts.edu/~nr/cs257/archive/florian-loitsch/printf.pdf section 5 ).
test suite changes:
Despite being compatible, in some cases it produces a different result from printf, and some tests
had to be adjusted.
one case is that `%.17g` (which means %e or %f which ever is shorter), chose to use `5000000000`
instead of 5e+9, which sounds like a bug?
In other cases, we changed TCL to compare numbers instead of strings to ignore minor rounding
issues (`expr 0.8 == 0.79999999999999999`)
When using the MIGRATE, with a destination Redis that has the user name or password set to the string "keys",
Redis would have determine the wrong set of key names the command is gonna access.
This lead to ACL returning wrong authentication result.
Destination instance:
```
127.0.0.1:6380> acl setuser default >keys
OK
127.0.0.1:6380> acl setuser keys on nopass ~* &* +@all
OK
```
Source instance:
```
127.0.0.1:6379> set a 123
OK
127.0.0.1:6379> acl setuser cc on nopass ~a* +@all
OK
127.0.0.1:6379> auth cc 1
OK
127.0.0.1:6379> migrate 127.0.0.1 6380 "" 0 1000 auth keys keys a
(error) NOPERM this user has no permissions to access one of the keys used as arguments
127.0.0.1:6379> migrate 127.0.0.1 6380 "" 0 1000 auth2 keys pswd keys a
(error) NOPERM this user has no permissions to access one of the keys used as arguments
```
Using `acl dryrun` we know that the parameters of `auth` and `auth2` are mistaken for the `keys` option.
```
127.0.0.1:6379> acl dryrun cc migrate whatever whatever "" 0 1000 auth keys keys a
"This user has no permissions to access the 'keys' key"
127.0.0.1:6379> acl dryrun cc migrate whatever whatever "" 0 1000 auth2 keys pswd keys a
"This user has no permissions to access the 'pswd' key"
```
Fix the bug by editing db.c/migrateGetKeys function, which finds the `keys` option and all the keys following.
PR #9320 introduces initialization order changes. Now cluster is initialized after modules.
This changes causes a crash if the module uses RM_Call inside the load function
on cluster mode (the code will try to access `server.cluster` which at this point is NULL).
To solve it, separate cluster initialization into 2 phases:
1. Structure initialization that happened before the modules initialization
2. Listener initialization that happened after.
Test was added to verify the fix.
Freeze time during execution of scripts and all other commands.
This means that a key is either expired or not, and doesn't change
state during a script execution. resolves#10182
This PR try to add a new `commandTimeSnapshot` function.
The function logic is extracted from `keyIsExpired`, but the related
calls to `fixed_time_expire` and `mstime()` are removed, see below.
In commands, we will avoid calling `mstime()` multiple times
and just use the one that sampled in call. The background is,
e.g. using `PEXPIRE 1` with valgrind sometimes result in the key
being deleted rather than expired. The reason is that both `PEXPIRE`
command and `checkAlreadyExpired` call `mstime()` separately.
There are other more important changes in this PR:
1. Eliminate `fixed_time_expire`, it is no longer needed.
When we want to sample time we should always use a time snapshot.
We will use `in_nested_call` instead to update the cached time in `call`.
2. Move the call for `updateCachedTime` from `serverCron` to `afterSleep`.
Now `commandTimeSnapshot` will always return the sample time, the
`lookupKeyReadWithFlags` call in `getNodeByQuery` will get a outdated
cached time (because `processCommand` is out of the `call` context).
We put the call to `updateCachedTime` in `aftersleep`.
3. Cache the time each time the module lock Redis.
Call `updateCachedTime` in `moduleGILAfterLock`, affecting `RM_ThreadSafeContextLock`
and `RM_ThreadSafeContextTryLock`
Currently the commandTimeSnapshot change affects the following TTL commands:
- SET EX / SET PX
- EXPIRE / PEXPIRE
- SETEX / PSETEX
- GETEX EX / GETEX PX
- TTL / PTTL
- EXPIRETIME / PEXPIRETIME
- RESTORE key TTL
And other commands just use the cached mstime (including TIME).
This is considered to be a breaking change since it can break a script
that uses a loop to wait for a key to expire.
As mentioned on docs, `RM_ResetDataset` Performs similar operation to FLUSHALL.
As FLUSHALL do not clean the function, `RM_ResetDataset` should not clean the functions
as well.
Refine getTimeoutFromObjectOrReply() out-of-range check.
Timeout is parsed (and verifies out of range) as double and
multiplied by 1000, added mstime() and stored in long-long
which might lead to out-of-range value of long-long.
Co-authored-by: moticless <moticless@github.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
This PR introduces a couple of changes to improve cluster test stability:
1. Increase the cluster node timeout to 3 seconds, which is similar to the
normal cluster tests, but introduce a new mechanism to increase the ping
period so that the tests are still fast. This new config is a debug config.
2. Set `cluster-replica-no-failover yes` on a wider array of tests which are
sensitive to failovers. This was occurring on the ARM CI.
There is a race condition in the test:
```
*** [err]: redis-cli --cluster add-node with cluster-port in tests/unit/cluster/cli.tcl
Expected '5' to be equal to '4' {assert_equal 5 [CI 0 cluster_known_nodes]} proc ::test)
```
When using cli to add node, there can potentially be a race condition
in which all nodes presenting cluster state o.k even though the added
node did not yet meet all cluster nodes.
This comment and the fix were taken from #11221. Also apply it in several
other similar places.
Mainly fix two minor bug
1. When handle BL*POP/BLMOVE commands with blocked clients, we should increment server.dirty.
2. `listPopRangeAndReplyWithKey()` in `serveClientBlockedOnList()` should not repeat calling
`signalModifiedKey()` which has been called when an element was pushed on the list.
(was skipped in all bpop commands, other than blmpop)
Other optimization
add `signal` param for `listElementsRemoved` to skip `signalModifiedKey()` to unify all pop operation.
Unifying all pop operations also prepares us for #11303, so that we can avoid having to deal with the
conversion from quicklist to listpack() in various places when the list shrinks.
The original idea behind auto-setting the default (first,last,step) spec was to use
the most "open" flags when the user didn't provide any key-spec flags information.
While the above idea is a good approach, it really makes no sense to set
CMD_KEY_VARIABLE_FLAGS if the user didn't provide the getkeys-api flag:
in this case there's not way to retrieve these variable flags, so what's the point?
Internally in redis there was code to ignore this already, so this fix doesn't change
redis's behavior, it only affects the output of COMMAND command.
If a command gets an OOM response and then if we set maxmemory to zero
to disable the limit, server.pre_command_oom_state never gets updated
and it stays true. As RM_Call() calls with "respect deny-oom" flag checks
server.pre_command_oom_state, all calls will fail with OOM.
Added server.maxmemory check in RM_Call() to process deny-oom flag
only if maxmemory is configured.
Adds a number of user management/ACL validaiton/command execution functions to improve a
Redis module's ability to enforce ACLs correctly and easily.
* RM_SetContextUser - sets a RedisModuleUser on the context, which RM_Call will use to both
validate ACLs (if requested and set) as well as assign to the client so that scripts executed via
RM_Call will have proper ACL validation.
* RM_SetModuleUserACLString - Enables one to pass an entire ACL string, not just a single OP
and have it applied to the user
* RM_GetModuleUserACLString - returns a stringified version of the user's ACL (same format as dump
and list). Contains an optimization to cache the stringified version until the underlying ACL is modified.
* Slightly re-purpose the "C" flag to RM_Call from just being about ACL check before calling the
command, to actually running the command with the right user, so that it also affects commands
inside EVAL scripts. see #11231
Executing an XAUTOCLAIM command on a stream key in a specific state, with a
specially crafted COUNT argument may cause an integer overflow, a subsequent
heap overflow, and potentially lead to remote code execution.
The problem affects Redis versions 7.0.0 or newer.
Starting from 6.2, after ACL SETUSER user reset, the user
will carry the sanitize-payload flag. It was added in #7807,
and then ACL SETUSER reset is inconsistent with default
newly created user which missing sanitize-payload flag.
Same as `off` and `on` these two bits are mutually exclusive,
the default created user needs to have sanitize-payload flag.
Adds USER_FLAG_SANITIZE_PAYLOAD flag to ACLCreateUser.
Note that the bug don't have any real implications,
since the code in rdb.c (rdbLoadObject) checks for
`USER_FLAG_SANITIZE_PAYLOAD_SKIP`, so the fact that
`USER_FLAG_SANITIZE_PAYLOAD` is missing doesn't really matters.
Added tests to make sure it won't be broken in the future,
and updated the comment in ACLSetUser and redis.conf
When using `INFO ALL <section>`, when `section` is a specific module section.
Redis will not print the additional section(s).
The fix in this case, will search the modules info sections if the user provided additional sections to `ALL`.
Co-authored-by: Oran Agra <oran@redislabs.com>
This PR mainly deals with 2 crashes introduced in #9357,
and fix the QUICKLIST-PACKED-THRESHOLD mess in external test mode.
1. Fix crash due to deleting an entry from a compress quicklistNode
When inserting a large element, we need to create a new quicklistNode first,
and then delete its previous element, if the node where the deleted element is
located is compressed, it will cause a crash.
Now add `dont_compress` to quicklistNode, if we want to use a quicklistNode
after some operation, we can use this flag like following:
```c
node->dont_compress = 1; /* Prevent to be compressed */
some_operation(node); /* This operation might try to compress this node */
some_other_operation(node); /* We can use this node without decompress it */
node->dont_compress = 0; /* Re-able compression */
quicklistCompressNode(node);
```
Perhaps in the future, we could just disable the current entry from being
compressed during the iterator loop, but that would require more work.
2. Fix crash due to wrongly split quicklist
before #9357, the offset param of _quicklistSplitNode() will not negative.
For now, when offset is negative, the split extent will be wrong.
following example:
```c
int orig_start = after ? offset + 1 : 0;
int orig_extent = after ? -1 : offset;
int new_start = after ? 0 : offset;
int new_extent = after ? offset + 1 : -1;
# offset: -2, after: 1, node->count: 2
# current wrong range: [-1,-1] [0,-1]
# correct range: [1,-1] [0, 1]
```
Because only `_quicklistInsert()` splits the quicklistNode and only
`quicklistInsertAfter()`, `quicklistInsertBefore()` call _quicklistInsert(),
so `quicklistReplaceEntry()` and `listTypeInsert()` might occur this crash.
But the iterator of `listTypeInsert()` is alway from head to tail(iter->offset is
always positive), so it is not affected.
The final conclusion is this crash only occur when we insert a large element
with negative index into a list, that affects `LSET` command and `RM_ListSet`
module api.
3. In external test mode, we need to restore quicklist packed threshold after
when the end of test.
4. Show `node->count` in quicklistRepr().
5. Add new tcl proc `config_get_set` to support restoring config in tests.
When using cli to add node, there can potentially be a race condition in
which all nodes presenting cluster state o.k even though the added node
did not yet meet all cluster nodes.
this adds another utility function to wait until all cluster nodes see the same cluster size
EVAL scripts are by default not considered `write` commands, so they were allowed on a replica.
But when adding a shebang, they become `write` command (unless the `no-writes` flag is added).
With this change we'll handle them as write commands, and reply with MOVED instead of
READONLY when executed on a redis cluster replica.
Co-authored-by: chendianqiang <chendianqiang@meituan.com>
Add a new "D" flag to RM_Call which runs whatever verification the user requests,
but returns before the actual execution of the command.
It automatically enables returning error messages as CallReply objects to distinguish
success (NULL) from failure (CallReply returned).
When RM_Call was used with `M` (reject OOM), `W` (reject writes),
as well as `S` (rejecting stale or write commands in "Script mode"),
it would have only checked the command flags, but not the declared
script flag in case it's a command that runs a script.
Refactoring: extracts out similar code in server.c's processCommand
to be usable in RM_Call as well.
Bugfix:
with the scenario if we force assigned a slot to other master,
old master will lose the slot ownership, then old master will
call the function delKeysInSlot() to delete all keys which in
the slot. These delete operations should replicate to replicas,
avoid the data divergence issue in master and replicas.
Additionally, in this case, we now call:
* signalModifiedKey (to invalidate WATCH)
* moduleNotifyKeyspaceEvent (key space notification for modules)
* dirty++ (to signal that the persistence file may be outdated)
Co-authored-by: weimeng <weimeng@didiglobal.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Check the validity of the value before performing the create operation,
prevents new data from being generated even if the request fails to execute.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: chendianqiang <chendianqiang@meituan.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
Redis 7.0 has #9890 which added an assertion when the propagation queue
was not flushed and we got to beforeSleep.
But it turns out that when processCommands calls getNodeByQuery and
decides to reject the command, it can lead to a key that was lazy
expired and is deleted without later flushing the propagation queue.
This change prevents lazy expiry from deleting the key at this stage
(not as part of a command being processed in `call`)
Fix `Test replication with lazy expire` test to not timeout the wait command.
This fix will allow the test to pass on slow environments and when running with valgrind.
The PR reverts the changes made on #10969.
The reason for revert was trigger because of occasional test failure
that started after the PR was merged.
The issue is that if there is a lazy expire during the command invocation,
the `del` command is added to the replication stream after the command
placeholder. So the logical order on the primary is:
* Delete the key (lazy expiration)
* Command invocation
But the replication stream gets it the other way around:
* Command invocation (because the command is written into the placeholder)
* Delete the key (lazy expiration)
So if the command write to the key that was just lazy expired we will get
inconsistency between primary and replica.
One solution we considered is to add another lazy expire replication stream
and write all the lazy expire there. Then when replicating, we will replicate the
lazy expire replication stream first. This will solve this specific test failure but
we realize that the issues does not ends here and the more we dig the more
problems we find.One of the example we thought about (that can actually
crashes Redis) is as follow:
* User perform SINTERSTORE
* When Redis tries to fetch the second input key it triggers lazy expire
* The lazy expire trigger a module logic that deletes the first input key
* Now Redis hold the robj of the first input key that was actually freed
We believe we took the wrong approach and we will come up with another
PR that solve the problem differently, for now we revert the changes so we
will not have the tests failure.
Notice that not the entire code was revert, some parts of the PR are changes
that we would like to keep. The changes that **was** reverted are:
* Saving a placeholder for replication at the beginning of the command (`call` function)
* Order of the replication stream on active expire and eviction (we will decide how
to handle it correctly on follow up PR)
* `Spop` changes are no longer needed (because we reverted the placeholder code)
Changes that **was not** reverted:
* On expire/eviction, wrap the `del` and the notification effect in a multi exec.
* `PropagateNow` function can still accept a special dbid, -1, indicating not to replicate select.
* Keep optimisation for reusing the `alsoPropagate` array instead of allocating it each time.
Tests:
* All tests was kept and only few tests was modify to work correctly with the changes
* Test was added to verify that the revert fixes the issues.
* Support BUILD_TLS=module to be loaded as a module via config file or
command line. e.g. redis-server --loadmodule redis-tls.so
* Updates to redismodule.h to allow it to be used side by side with
server.h by defining REDISMODULE_CORE_MODULE
* Changes to server.h, redismodule.h and module.c to avoid repeated
type declarations (gcc 4.8 doesn't like these)
* Add a mechanism for non-ABI neutral modules (ones who include
server.h) to refuse loading if they detect not being built together with
redis (release.c)
* Fix wrong signature of RedisModuleDefragFunc, this could break
compilation of a module, but not the ABI
* Move initialization of listeners in server.c to be after loading
the modules
* Config TLS after initialization of listeners
* Init cluster after initialization of listeners
* Add TLS module to CI
* Fix a test suite race conditions:
Now that the listeners are initialized later, it's not sufficient to
wait for the PID message in the log, we need to wait for the "Server
Initialized" message.
* Fix issues with moduleconfigs test as a result from start_server
waiting for "Server Initialized"
* Fix issues with modules/infra test as a result of an additional module
present
Notes about Sentinel:
Sentinel can't really rely on the tls module, since it uses hiredis to
initiate connections and depends on OpenSSL (won't be able to use any
other connection modules for that), so it was decided that when TLS is
built as a module, sentinel does not support TLS at all.
This means that it keeps using redis_tls_ctx and redis_tls_client_ctx directly.
Example code of config in redis-tls.so(may be use in the future):
RedisModuleString *tls_cfg = NULL;
void tlsInfo(RedisModuleInfoCtx *ctx, int for_crash_report) {
UNUSED(for_crash_report);
RedisModule_InfoAddSection(ctx, "");
RedisModule_InfoAddFieldLongLong(ctx, "var", 42);
}
int tlsCommand(RedisModuleCtx *ctx, RedisModuleString **argv, int argc)
{
if (argc != 2) return RedisModule_WrongArity(ctx);
return RedisModule_ReplyWithString(ctx, argv[1]);
}
RedisModuleString *getStringConfigCommand(const char *name, void *privdata) {
REDISMODULE_NOT_USED(name);
REDISMODULE_NOT_USED(privdata);
return tls_cfg;
}
int setStringConfigCommand(const char *name, RedisModuleString *new, void *privdata, RedisModuleString **err) {
REDISMODULE_NOT_USED(name);
REDISMODULE_NOT_USED(err);
REDISMODULE_NOT_USED(privdata);
if (tls_cfg) RedisModule_FreeString(NULL, tls_cfg);
RedisModule_RetainString(NULL, new);
tls_cfg = new;
return REDISMODULE_OK;
}
int RedisModule_OnLoad(void *ctx, RedisModuleString **argv, int argc)
{
....
if (RedisModule_CreateCommand(ctx,"tls",tlsCommand,"",0,0,0) == REDISMODULE_ERR)
return REDISMODULE_ERR;
if (RedisModule_RegisterStringConfig(ctx, "cfg", "", REDISMODULE_CONFIG_DEFAULT, getStringConfigCommand, setStringConfigCommand, NULL, NULL) == REDISMODULE_ERR)
return REDISMODULE_ERR;
if (RedisModule_LoadConfigs(ctx) == REDISMODULE_ERR) {
if (tls_cfg) {
RedisModule_FreeString(ctx, tls_cfg);
tls_cfg = NULL;
}
return REDISMODULE_ERR;
}
...
}
Co-authored-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
This PR includes 2 missed test cases of XDEL and XGROUP CREATE command
1. one test case: XDEL delete multiply id once
2. 3 test cases: XGROUP CREATE has ENTRIESREAD parameter,
which equal 0 (special positive number), 3 and negative value.
Co-authored-by: Ubuntu <lucas.guang.yang1@huawei.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
This PR makes sure that "name" is unique for all arguments in the same
level (i.e. all args of a command and all args within a block/oneof).
This means several argument with identical meaning can be referred to together,
but also if someone needs to refer to a specific one, they can use its full path.
In addition, the "display_text" field has been added, to be used by redis.io
in order to render the syntax of the command (for the vast majority it is
identical to "name" but sometimes we want to use a different string
that is not "name")
The "display" field is exposed via COMMAND DOCS and will be present
for every argument, except "oneof" and "block" (which are container
arguments)
Other changes:
1. Make sure we do not have any container arguments ("oneof" or "block")
that contain less than two sub-args (otherwise it doesn't make sense)
2. migrate.json: both AUTH and AUTH2 should not be "optional"
3. arg names cannot contain underscores, and force the usage of hyphens
(most of these were a result of the script that generated the initial json files
from redis.io commands.json).
Currently, we call zfree(cmd->args), but the argument array
needs to be freed recursively (there might be sub-args).
Also fixed memory leaks on cmd->tips and cmd->history.
Fixes#11145
Fix replication inconsistency on modules that uses key space notifications.
### The Problem
In general, key space notifications are invoked after the command logic was
executed (this is not always the case, we will discuss later about specific
command that do not follow this rules). For example, the `set x 1` will trigger
a `set` notification that will be invoked after the `set` logic was performed, so
if the notification logic will try to fetch `x`, it will see the new data that was written.
Consider the scenario on which the notification logic performs some write
commands. for example, the notification logic increase some counter,
`incr x{counter}`, indicating how many times `x` was changed.
The logical order by which the logic was executed is has follow:
```
set x 1
incr x{counter}
```
The issue is that the `set x 1` command is added to the replication buffer
at the end of the command invocation (specifically after the key space
notification logic was invoked and performed the `incr` command).
The replication/aof sees the commands in the wrong order:
```
incr x{counter}
set x 1
```
In this specific example the order is less important.
But if, for example, the notification would have deleted `x` then we would
end up with primary-replica inconsistency.
### The Solution
Put the command that cause the notification in its rightful place. In the
above example, the `set x 1` command logic was executed before the
notification logic, so it should be added to the replication buffer before
the commands that is invoked by the notification logic. To achieve this,
without a major code refactoring, we save a placeholder in the replication
buffer, when finishing invoking the command logic we check if the command
need to be replicated, and if it does, we use the placeholder to add it to the
replication buffer instead of appending it to the end.
To be efficient and not allocating memory on each command to save the
placeholder, the replication buffer array was modified to reuse memory
(instead of allocating it each time we want to replicate commands).
Also, to avoid saving a placeholder when not needed, we do it only for
WRITE or MAY_REPLICATE commands.
#### Additional Fixes
* Expire and Eviction notifications:
* Expire/Eviction logical order was to first perform the Expire/Eviction
and then the notification logic. The replication buffer got this in the
other way around (first notification effect and then the `del` command).
The PR fixes this issue.
* The notification effect and the `del` command was not wrap with
`multi-exec` (if needed). The PR also fix this issue.
* SPOP command:
* On spop, the `spop` notification was fired before the command logic
was executed. The change in this PR would have cause the replication
order to be change (first `spop` command and then notification `logic`)
although the logical order is first the notification logic and then the
`spop` logic. The right fix would have been to move the notification to
be fired after the command was executed (like all the other commands),
but this can be considered a breaking change. To overcome this, the PR
keeps the current behavior and changes the `spop` code to keep the right
logical order when pushing commands to the replication buffer. Another PR
will follow to fix the SPOP properly and match it to the other command (we
split it to 2 separate PR's so it will be easy to cherry-pick this PR to 7.0 if
we chose to).
#### Unhanded Known Limitations
* key miss event:
* On key miss event, if a module performed some write command on the
event (using `RM_Call`), the `dirty` counter would increase and the read
command that cause the key miss event would be replicated to the replication
and aof. This problem can also happened on a write command that open
some keys but eventually decides not to perform any action. We decided
not to handle this problem on this PR because the solution is complex
and will cause additional risks in case we will want to cherry-pick this PR.
We should decide if we want to handle it in future PR's. For now, modules
writers is advice not to perform any write commands on key miss event.
#### Testing
* We already have tests to cover cases where a notification is invoking write
commands that are also added to the replication buffer, the tests was modified
to verify that the replica gets the command in the correct logical order.
* Test was added to verify that `spop` behavior was kept unchanged.
* Test was added to verify key miss event behave as expected.
* Test was added to verify the changes do not break lazy expiration.
#### Additional Changes
* `propagateNow` function can accept a special dbid, -1, indicating not
to replicate `select`. We use this to replicate `multi/exec` on `propagatePendingCommands`
function. The side effect of this change is that now the `select` command
will appear inside the `multi/exec` block on the replication stream (instead of
outside of the `multi/exec` block). Tests was modified to match this new behavior.
Make sure the script calls in the tests declare the keys they intend to use.
Do that with minimal changes to existing lines (so many scripts still have a hard coded key names)
Co-authored-by: Valentino Geron <valentino@redis.com>
This pr mainly has the following four changes:
1. Add missing lua_pop in `luaGetFromRegistry`.
This bug affects `redis.register_function`, where `luaGetFromRegistry` in
`luaRegisterFunction` will return null when we call `redis.register_function` nested.
.e.g
```
FUNCTION LOAD "#!lua name=mylib \n local lib=redis \n lib.register_function('f2', function(keys, args) lib.register_function('f1', function () end) end)"
fcall f2 0
````
But since we exit when luaGetFromRegistry returns null, it does not cause the stack to grow indefinitely.
3. When getting `REGISTRY_RUN_CTX_NAME` from the registry, use `serverAssert`
instead of error return. Since none of these lua functions are registered at the time
of function load, scriptRunCtx will never be NULL.
4. Add `serverAssert` for `luaLdbLineHook`, `luaEngineLoadHook`.
5. Remove `luaGetFromRegistry` from `redis_math_random` and
`redis_math_randomseed`, it looks like they are redundant.
some skip tags were missing on some tests
avoid using HELLO if denytags has resp3 (target server may not support it)
Co-authored-by: Valentino Geron <valentino@redis.com>
`bitfield` with `get` may not be readonly.
```
127.0.0.1:6384> acl setuser hello on nopass %R~* +@all
OK
127.0.0.1:6384> auth hello 1
OK
127.0.0.1:6384> bitfield hello set i8 0 1
(error) NOPERM this user has no permissions to access one of the keys used as arguments
127.0.0.1:6384> bitfield hello set i8 0 1 get i8 0
1) (integer) 0
2) (integer) 1
```
Co-authored-by: Oran Agra <oran@redislabs.com>
This is the history of aof-race related changes:
1. added in 3aa4b00970
2. disabled in dcdfd005a0
3. enabled in 5c63922691
4. disabled in 53a2af3941
This PR refreshes the aof-race test, re-enable it.
Closes#10971
* some of the tests don't clean the key the use
* marked tests with `{singledb:skip}` if they use SELECT
Co-authored-by: Valentino Geron <valentino@redis.com>
There is a -Wimplicit-function-declaration warning in here:
```
keyspace_events.c: In function ‘KeySpace_NotificationGeneric’:
keyspace_events.c:67:9: warning: implicit declaration of function ‘usleep’; did you mean ‘sleep’? [-Wimplicit-function-declaration]
67 | usleep(1);
| ^~~~~~
| sleep
```
The kill above is sometimes successful and sometimes already too late.
The PING in pysnc wrong offset test got rejected by bgsaveerr because
lastbgsave_status is C_ERR.
In theory, using diskless can avoid PING being affected, because when
the replica is dropped, we will kill the child with SIGUSR1, and this
will not affect lastbgsave_status.
Anyway, this kill is not particularly needed here, dropping the kill
is the best one, since we do have the waitForBgsave, so just let it
take care of the bgsave. No need for fast termination.
RM_Microseconds
Return the wall-clock Unix time, in microseconds
RM_CachedMicroseconds
Returns a cached copy of the Unix time, in microseconds.
It is updated in the server cron job and before executing a command.
It is useful for complex call stacks, such as a command causing a
key space notification, causing a module to execute a RedisModule_Call,
causing another notification, etc.
It makes sense that all these callbacks would use the same clock.
Fix#11030, use lua_rawget to avoid triggering metatables.
#11030 shows how return `_G` from the Lua script (either function or eval), cause the
Lua interpreter to Panic and the Redis processes to exit with error code 1.
Though return `_G` only panic on Redis 7 and 6.2.7, the underline issue exists on older
versions as well (6.0 and 6.2). The underline issue is returning a table with a metatable
such that the metatable raises an error.
The following example demonstrate the issue:
```
127.0.0.1:6379> eval "local a = {}; setmetatable(a,{__index=function() foo() end}) return a" 0
Error: Server closed the connection
```
```
PANIC: unprotected error in call to Lua API (user_script:1: Script attempted to access nonexistent global variable 'foo')
```
The Lua panic happened because when returning the result to the client, Redis needs to
introspect the returning table and transform the table into a resp. In order to scan the table,
Redis uses `lua_gettable` api which might trigger the metatable (if exists) and might raise an error.
This code is not running inside `pcall` (Lua protected call), so raising an error causes the
Lua to panic and exit. Notice that this is not a crash, its a Lua panic that exit with error code 1.
Returning `_G` panics on Redis 7 and 6.2.7 because on those versions `_G` has a metatable
that raises error when trying to fetch a none existing key.
### Solution
Instead of using `lua_gettable` that might raise error and cause the issue, use `lua_rawget`
that simply return the value from the table without triggering any metatable logic.
This is promised not to raise and error.
The downside of this solution is that it might be considered as breaking change, if someone
rely on metatable in the returned value. An alternative solution is to wrap this entire logic
with `pcall` (Lua protected call), this alternative require a much bigger refactoring.
### Back Porting
The same fix will work on older versions as well (6.2, 6.0). Notice that on those version,
the issue can cause Redis to crash if inside the metatable logic there is an attempt to accesses
Redis (`redis.call`). On 7.0, there is not crash and the `redis.call` is executed as if it was done
from inside the script itself.
### Tests
Tests was added the verify the fix
Gossip the cluster node blacklist in ping and pong messages.
This means that CLUSTER FORGET doesn't need to be sent to all nodes in a cluster.
It can be sent to one or more nodes and then be propagated to the rest of them.
For each blacklisted node, its node id and its remaining blacklist TTL is gossiped in a
cluster bus ping extension (introduced in #9530).
A timing issue like this was reported in freebsd daily CI:
```
*** [err]: Sanity test push cmd after resharding in tests/unit/cluster/cli.tcl
Expected 'CLUSTERDOWN The cluster is down' to match '*MOVED*'
```
We additionally wait for each node to reach a consensus on the cluster
state in wait_for_condition to avoid the cluster down error.
The fix just like #10495, quoting madolson's comment:
Cluster check just verifies the the config state is self-consistent,
waiting for cluster_state to be okay is an independent check that all
the nodes actually believe each other are healthy.
At the same time i noticed that unit/moduleapi/cluster.tcl has an exact
same test, may have the same problem, also modified it.
The temporary array for deleted entries reply of XAUTOCLAIM was
insufficient, but also in fact the COUNT argument should be used to
control the size of the reply, so instead of terminating the loop by
only counting the claimed entries, we'll count deleted entries as well.
Fix#10968
Addresses CVE-2022-31144
replace use of:
sprintf --> snprintf
strcpy/strncpy --> redis_strlcpy
strcat/strncat --> redis_strlcat
**why are we making this change?**
Much of the code uses some unsafe variants or deprecated buffer handling
functions.
While most cases are probably not presenting any issue on the known path
programming errors and unterminated strings might lead to potential
buffer overflows which are not covered by tests.
**As part of this PR we change**
1. added implementation for redis_strlcpy and redis_strlcat based on the strl implementation: https://linux.die.net/man/3/strl
2. change all occurrences of use of sprintf with use of snprintf
3. change occurrences of use of strcpy/strncpy with redis_strlcpy
4. change occurrences of use of strcat/strncat with redis_strlcat
5. change the behavior of ll2string/ull2string/ld2string so that it will always place null
termination ('\0') on the output buffer in the first index. this was done in order to make
the use of these functions more safe in cases were the user will not check the output
returned by them (for example in rdbRemoveTempFile)
6. we added a compiler directive to issue a deprecation error in case a use of
sprintf/strcpy/strcat is found during compilation which will result in error during compile time.
However keep in mind that since the deprecation attribute is not supported on all compilers,
this is expected to fail during push workflows.
**NOTE:** while this is only an initial milestone. We might also consider
using the *_s implementation provided by the C11 Extensions (however not
yet widly supported). I would also suggest to start
looking at static code analyzers to track unsafe use cases.
For example LLVM clang checker supports security.insecureAPI.DeprecatedOrUnsafeBufferHandling
which can help locate unsafe function usage.
https://clang.llvm.org/docs/analyzer/checkers.html#security-insecureapi-deprecatedorunsafebufferhandling-c
The main reason not to onboard it at this stage is that the alternative
excepted by clang is to use the C11 extensions which are not always
supported by stdlib.
In the newly added cluster hostnames test, the primary is failing over during the reboot
for valgrind so we are validating the wrong node. This change just sets the replica to
prevent taking over, which seems to fix the test.
We could have also set the timeout higher, but it slows down the test.
The corrupt dump fuzzer uncovered a valgrind warning saying:
```
==76370== Argument 'size' of function malloc has a fishy (possibly negative) value: -3744781444216323815
```
This allocation would have failed (returning NULL) and being handled properly by redis (even before this change), but we also want to silence the valgrind warnings (which are checking that casting to ssize_t produces a non-negative value).
The solution i opted for is to explicitly fail these allocations (returning NULL), before even reaching `malloc` (which would have failed and return NULL too).
The implication is that we will not be able to support a single allocation of more than 2GB on a 32bit system (which i don't think is a realistic scenario).
i.e. i do think we could be facing cases were redis consumes more than 2gb on a 32bit system, but not in a single allocation.
The byproduct of this, is that i dropped the overflow assertions, since these will now lead to the same OOM panic we have for failed allocations.
#10942 break the new test added in #10449
```
Testing unit: 29-slot-migration-response.tcl
Cluster Join and auto-discovery test: FAILED: Cluster failed to join into a full mesh.
```
It looks like we need to wait for the cluster in 28 to become stable.
In #9389, we add a new `cluster-port` config and make cluster bus port configurable,
and currently redis-cli --cluster create/add-node doesn't support with a configurable `cluster-port` instance.
Because redis-cli uses the old way (port + 10000) to send the `CLUSTER MEET` command.
Now we add this support on redis-cli `--cluster`, note we don't need to explicitly pass in the
`cluster-port` parameter, we can get the real `cluster-port` of the node in `clusterManagerNodeLoadInfo`,
so the `--cluster create` and `--cluster add-node` interfaces have not changed.
We will use the `cluster-port` when we are doing `CLUSTER MEET`, also note that `CLUSTER MEET` bus-port
parameter was added in 4.0, so if the bus_port (the one in redis-cli) is 0, or equal (port + 10000),
we just call `CLUSTER MEET` with 2 arguments, using the old form.
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
Account sharded pubsub channels memory consumption in client memory usage
computation to accurately evict client based on the set threshold for `maxmemory-clients`.
This was harmless because we marked the parent command
with SENTINEL flag. So the populateCommandTable was ok.
And we also don't show the flag (SENTINEL and ONLY-SENTNEL)
in COMMAND INFO.
In this PR, we also add the same CMD_SENTINEL and CMD_ONLY_SENTINEL
flags check when populating the sub-commands.
so that in the future it'll be possible to add some sub-commands to sentinel or sentinel-only but not others.
Fix regression of CLUSTER RESET command in redis 7.0.
cluster reset command format is:
CLUSTER RESET [ HARD | SOFT]
According to the cluster reset command doc and codes, the third argument is optional, so
the arity in json file should be -2 instead of 3.
Add test to verify future regressions with RESET and RESET SOFT that were not covered.
Co-authored-by: Ubuntu <lucas.guang.yang1@huawei.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
When calling CLIENT INFO/LIST, and in various debug prints, Redis is printing
the number of pubsub channels / patterns the client is subscribed to.
With the addition of sharded pubsub, it would be useful to print the number of
keychannels the client is subscribed to as well.
The module API docs mentions this macro, but it was not defined (so no one could have used it).
Instead of adding it as is, we decided to add a _V1 macro, so that if / when we some day extend this struct,
modules that use this API and don't need the extra fields, will still use the old version
and still be compatible with older redis version (despite being compiled with newer redismodule.h)
Since the ranges of `unsigned long long` and `long long` are different, we cannot read an
`unsigned long long` integer from a `RedisModuleString` by `RedisModule_StringToLongLong` .
So I added two new Redis Module APIs to support the conversion between these two types:
* `RedisModule_StringToULongLong`
* `RedisModule_CreateStringFromULongLong`
Signed-off-by: RinChanNOWWW <hzy427@gmail.com>
This commit has two topics.
## Passing config name and value in the same arg
In #10660 (Redis 7.0.1), when we supported the config values that can start with `--` prefix (one of the two topics of that PR),
we broke another pattern: `redis-server redis.config "name value"`, passing both config name
and it's value in the same arg, see #10865
This wasn't a intended change (i.e we didn't realize this pattern used to work).
Although this is a wrong usage, we still like to fix it.
Now we support something like:
```
src/redis-server redis.conf "--maxmemory '700mb'" "--maxmemory-policy volatile-lru" --proc-title-template --my--title--template --loglevel verbose
```
## Changes around --save
Also in this PR, we undo the breaking change we made in #10660 on purpose.
1. `redis-server redis.conf --save --loglevel verbose` (missing `save` argument before anotehr argument).
In 7.0.1, it was throwing an wrong arg error.
Now it will work and reset the save, similar to how it used to be in 7.0.0 and 6.2.x.
3. `redis-server redis.conf --loglevel verbose --save` (missing `save` argument as last argument).
In 6.2, it did not reset the save, which was a bug (inconsistent with the previous bullet).
Now we will make it work and reset the save as well (a bug fix).
The new test added in #10891 can fail with a different error.
see comment in networking.c saying
```c
/* That's a best effort error message, don't check write errors.
* Note that for TLS connections, no handshake was done yet so nothing
* is written and the connection will just drop. */
```
my maxclients config:
```
redis-cli config get maxclients
1) "maxclients"
2) "4064"
```
Before this bug was fixed, creating 4065 clients appeared to be successful, but only 4064 were actually created```
```
./redis-benchmark -c 4065 -I
Creating 4065 idle connections and waiting forever (Ctrl+C when done)
cients: 4065
```
now :
```
./redis-benchmark -c 4065 -I
Creating 4065 idle connections and waiting forever (Ctrl+C when done)
Error from server: ERR max number of clients reached
./redis-benchmark -c 4064 -I
Creating 4064 idle connections and waiting forever (Ctrl+C when done)
clients: 4064
```
The PR fixes 2 issues:
### RM_Call crash on script mode
`RM_Call` can potentially be called from a background thread where `server.current_client`
are not set. In such case we get a crash on `NULL` dereference.
The fix is to check first if `server.current_client` is `NULL`, if it does we should
verify disc errors and readonly replica as we do to any normal clients (no masters nor AOF).
### RM_Call block OOM commands when not needed
Again `RM_Call` can be executed on a background thread using a `ThreadSafeCtx`.
In such case `server.pre_command_oom_state` can be irrelevant and should not be
considered when check OOM state. This cause OOM commands to be blocked when
not necessarily needed.
In such case, check the actual used memory (and not the cached value). Notice that in
order to know if the cached value can be used, we check that the ctx that was used on
the `RM_Call` is a ThreadSafeCtx. Module writer can potentially abuse the API and use
ThreadSafeCtx on the main thread. We consider this as a API miss used.
when we know the size of the zset we're gonna store in advance,
we can check if it's greater than the listpack encoding threshold,
in which case we can create a skiplist from the get go, and avoid
converting the listpack to skiplist later after it was already populated.
If a script made a modification and then was interrupted for taking too long.
there's a chance redis will detect that a replica dropped and would like to reject
write commands with NOREPLICAS due to insufficient good replicas.
returning an error on a command in this case breaks the script atomicity.
The same could in theory happen with READONLY, MISCONF, but i don't think
these state changes can happen during script execution.
I noticed that scripting.tcl uses INFO from within a script and thought it's an
overkill and concluded it's nicer to use another CMD_STALE command,
decided to use ECHO, and then noticed it's not at all allowed in stale mode.
probably overlooked at #6843
The SET and BITFIELD command were added `get_keys_function` in #10148, causing
them to be wrongly marked movablekeys in `populateCommandMovableKeys`.
This was an unintended side effect introduced in #10148 (7.0 RC1)
which could cause some clients an extra round trip for these commands in cluster mode.
Since we define movablekeys as a way to determine if the legacy range [first, last, step]
doesn't find all keys, then we need a completely different approach.
The right approach should be to check if the legacy range covers all key-specs,
and if none of the key-specs have the INCOMPLETE flag.
This way, we don't need to look at getkeys_proc of VARIABLE_FLAG at all.
Probably with the exception of modules, who may still not be using key-specs.
In this PR, we removed `populateCommandMovableKeys` and put its logic in
`populateCommandLegacyRangeSpec`.
In order to properly serve both old and new modules, we must probably keep relying
CMD_MODULE_GETKEYS, but do that only for modules that don't declare key-specs.
For ones that do, we need to take the same approach we take with native redis commands.
This approach was proposed by Oran. Fixes#10833
Co-authored-by: Oran Agra <oran@redislabs.com>
The test calls `ldd` on `redis-server` in order to find out whether the binary
was linked against `libmusl`; However, `ldd` returns a value different from `0`
when statically linking the binaries agains libc-musl, because `redis-server` is
not a dynamic executable (as given by the exception thrown by the failing test),
and `make test` terminates with an error::
$ ldd src/redis-server
not a dynamic executable
$ echo $?
1
This commit fixes the test by ignoring such failures.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
This change fixes failing `integration/logging.tcl` test in Gentoo with
musl libc, where `ldd` returns
```
libc.so => /lib/ld-musl-x86_64.so.1 (0x7f9d5f171000)
```
unlike Alpine's
```
libc.musl-x86_64.so.1 => /lib/ld-musl-x86_64.so.1 (0x7f82cfa16000)
```
The solution is to extend matching pattern introduced in #8532.
Redis 7 adds some new alias config like `hash-max-listpack-entries` alias `hash-max-ziplist-entries`.
If a config file contains both real name and alias like this:
```
hash-max-listpack-entries 20
hash-max-ziplist-entries 20
```
after set `hash-max-listpack-entries` to 100 and `config rewrite`, the config file becomes to:
```
hash-max-listpack-entries 100
hash-max-ziplist-entries 20
```
we can see that the alias config is not modified, and users will get wrong config after restart.
6.0 and 6.2 doesn't have this bug, since they only have the `slave` word alias.
Co-authored-by: Oran Agra <oran@redislabs.com>
A regression from #10285 (redis 7.0).
CONFIG REWRITE would put lines with: `include`, `rename-command`,
`user`, `loadmodule`, and any module specific config in a comment.
For ACL `user`, `loadmodule` and module specific configs would be
re-inserted at the end (instead of updating existing lines), so the only
implication is a messy config file full of comments.
But for `rename-command` and `include`, the implication would be that
they're now missing, so a server restart would lose them.
Co-authored-by: Oran Agra <oran@redislabs.com>
The important part is that read-only scripts (not just EVAL_RO
and FCALL_RO, but also ones with `no-writes` executed by normal EVAL or
FCALL), will now be permitted to run during CLIENT PAUSE WRITE (unlike
before where only the _RO commands would be processed).
Other than that, some errors like OOM, READONLY, MASTERDOWN are now
handled by processCommand, rather than the command itself affects the
error string (and even error code in some cases), and command stats.
Besides that, now the `may-replicate` commands, PFCOUNT and PUBLISH, will
be considered `write` commands in scripts and will be blocked in all
read-only scripts just like other write commands.
They'll also be blocked in EVAL_RO (i.e. even for scripts without the
`no-writes` shebang flag.
This commit also hides the `may_replicate` flag from the COMMAND command
output. this is a **breaking change**.
background about may_replicate:
We don't want to expose a no-may-replicate flag or alike to scripts, since we
consider the may-replicate thing an internal concern of redis, that we may
some day get rid of.
In fact, the may-replicate flag was initially introduced to flag EVAL: since
we didn't know what it's gonna do ahead of execution, before function-flags
existed). PUBLISH and PFCOUNT, both of which because they have side effects
which may some day be fixed differently.
code changes:
The changes in eval.c are mostly code re-ordering:
- evalCalcFunctionName is extracted out of evalGenericCommand
- evalExtractShebangFlags is extracted luaCreateFunction
- evalGetCommandFlags is new code
* Fix broken protocol when redis can't persist to RDB (general commands, not
modules), excessive newline. regression of #10372 (7.0 RC3)
* Fix broken protocol when Redis can't persist to AOF (modules and
scripts), missing newline.
* Fix bug in OOM check of EVAL scripts called from RM_Call.
set the cached OOM state for scripts before executing module commands too,
so that it can serve scripts that are executed by modules.
i.e. in the past EVAL executed by RM_Call could have either falsely
fail or falsely succeeded because of a wrong cached OOM state flag.
* Fix bugs with RM_Yield:
1. SHUTDOWN should only accept the NOSAVE mode
2. Avoid eviction during yield command processing.
3. Avoid processing master client commands while yielding from another client
* Add new two more checks to RM_Call script mode.
1. READONLY You can't write against a read only replica
2. MASTERDOWN Link with MASTER is down and `replica-serve-stale-data` is set to `no`
* Add new RM_Call flag to let redis automatically refuse `deny-oom` commands
while over the memory limit.
* Add tests to cover various errors from Scripts, Modules, Modules
calling scripts, and Modules calling commands in script mode.
Add tests:
* Looks like the MISCONF error was completely uncovered by the tests,
add tests for it, including from scripts, and modules
* Add tests for NOREPLICAS from scripts
* Add tests for the various errors in module RM_Call, including RM_Call that
calls EVAL, and RM_call in "eval mode". that includes:
NOREPLICAS, READONLY, MASTERDOWN, MISCONF
To easily distinguish between sharded channel message and a global
channel message, introducing `smessage` (instead of `message`) as
message bulk for sharded channel publish message.
This is gonna be a breaking change in 7.0.1!
Background:
Sharded pubsub introduced in redis 7.0, but after the release we quickly
realized that the fact that it's problematic that the client can't distinguish
between normal (global) pubsub messages and sharded ones.
This is important because the same connection can subscribe to both,
but messages sent to one pubsub system are not propagated to the
other (they're completely separate), so if one connection is used to
subscribe to both, we need to assist the client library to know which
message it got so it can forward it to the correct callback.
There is a timing issue reported in test-sanitizer-address (gcc):
```
Sentinels (re)connection following SENTINEL SET mymaster auth-pass:
FAILED: Expected to be disconnected from master due to wrong password
```
The reason we reach it, is because the test is fast enough to modify
auth-pass and test sentinel connection status with the server,
before its scheduled operation got the chance to update connection
status with the server.
We need to wait for `sentinelTimer` to kick in, and then update the
connection status. Replace condition with wait_for_condition on the check.
Fix just like #10480 did
When `zrangestore` is called container destination object is created.
Before this PR we used to create a listpack based object even if `zset-max-ziplist-entries`
or equivalent`zset-max-listpack-entries` was set to 0.
This triggered immediate conversion of the listpack into a skiplist in `zrangestore`, which hits
an assertion resulting in an engine crash.
Added a TCL test that reproduces this issue.
This bug was introduced in #9484 (7.0.0).
It result that BZMPOP blocked on non-key arguments.
Like `bzmpop 0 1 myzset min count 10`, this command will additionally
block in these keys (except for the first and the last argument) and can return their values:
- 0: timeout value
- 1: numkeys value
- min: min/max token
- count: count token
Scripts that have the `no-writes` flag, cannot execute write commands,
and since all `deny-oom` commands are write commands, we now act
as if the `allow-oom` flag is implicitly set for scripts that set the `no-writes` flag.
this also implicitly means that the EVAL*_RO and FCALL_RO commands can
never fails with OOM error.
Note about a bug that's no longer relevant:
There was an issue with EVAL*_RO using shebang not being blocked correctly
in OOM state:
When an EVAL script declares a shebang, it was by default not allowed to run in
OOM state.
but this depends on a flag that is updated before the command is executed, which
was not updated in case of the `_RO` variants.
the result is that if the previous cached state was outdated (either true or false),
the script will either unjustly fail with OOM, or unjustly allowed to run despite
the OOM state.
It doesn't affect scripts without a shebang since these depend on the actual
commands they run, and since these are only read commands, they don't care
for that cached oom state flag.
it did affect scripts with shebang and no allow-oom flag, bug after the change in
this PR, scripts that are run with eval_ro would implicitly have that flag so again
the cached state doesn't matter.
p.s. this isn't a breaking change since all it does is allow scripts to run when they
should / could rather than blocking them.
Updated the comments for:
info command
lmpopCommand and blmpopCommand
sinterGenericCommand
Fix the missing "key" words in the srandmemberCommand function
For LPOS command, when rank is 0, prompt user that rank could be
positive number or negative number, and add a test for it
The purpose of the test is to kill the child while it is running.
From the last two lines we can see the child exits before being killed.
```
- Module fork started pid: 56998
* <fork> fork child started
- Killing running module fork child: 56998
* <fork> fork child exiting
signal-handler (1652267501) Received SIGUSR1 in child, exiting now.
```
In this commit, we pass an argument to `fork.create` indicating how
long it should sleep. For the fork kill test, we use a longer time to
avoid the child exiting before being killed.
Other changes:
use wait_for_condition instead of hardcoded `after 250`.
Unify the test for failing fork with the one for killing it (save time)
## Take one bulk string with spaces for MULTI_ARG configs parsing
Currently redis-server looks for arguments that start with `--`,
and anything in between them is considered arguments for the config.
like: `src/redis-server --shutdown-on-sigint nosave force now --port 6380`
MULTI_ARG configs behave differently for CONFIG command, vs the command
line argument for redis-server.
i.e. CONFIG command takes one bulk string with spaces in it, while the
command line takes an argv array with multiple values.
In this PR, in config.c, if `argc > 1` we can take them as is,
and if the config is a `MULTI_ARG` and `argc == 1`, we will split it by spaces.
So both of these will be the same:
```
redis-server --shutdown-on-sigint nosave force now --shutdown-on-sigterm nosave force
redis-server --shutdown-on-sigint nosave "force now" --shutdown-on-sigterm nosave force
redis-server --shutdown-on-sigint nosave "force now" --shutdown-on-sigterm "nosave force"
```
## Allow options value to use the `--` prefix
Currently it decides to switch to the next config, as soon as it sees `--`,
even if there was not a single value provided yet to the last config,
this makes it impossible to define a config value that has `--` prefix in it.
For instance, if we want to set the logfile to `--my--log--file`,
like `redis-server --logfile --my--log--file --loglevel verbose`,
current code will handle that incorrectly.
In this PR, now we allow a config value that has `--` prefix in it.
**But note that** something like `redis-server --some-config --config-value1 --config-value2 --loglevel debug`
would not work, because if you want to pass a value to a config starting with `--`, it can only be a single value.
like: `redis-server --some-config "--config-value1 --config-value2" --loglevel debug`
An example (using `--` prefix config value):
```
redis-server --logfile --my--log--file --loglevel verbose
redis-cli config get logfile loglevel
1) "loglevel"
2) "verbose"
3) "logfile"
4) "--my--log--file"
```
### Potentially breaking change
`redis-server --save --loglevel verbose` used to work the same as `redis-server --save "" --loglevel verbose`
now, it'll error!
## FLUSHALL
We used to restore the dirty counter after `rdbSave` zeroed it if we enable save.
Otherwise FLUSHALL will not be replicated nor put into the AOF.
And then we do increment it again below.
Without that extra dirty++, when db was already empty, FLUSHALL
will not be replicated nor put into the AOF.
We now gonna replace all that dirty counter magic with a call
to forceCommandPropagation (REPL and AOF), instead of all the
messing around with the dirty counter.
Added tests to cover three part (dirty counter, REPL, AOF).
One benefit other than cleaner code is that the `rdb_changes_since_last_save` is correct in this case.
## FLUSHDB
FLUSHDB was not replicated nor put into the AOF when db was already empty.
Unlike DEL on a non-existing key, FLUSHDB always does something, and that's to call the module hook.
So basically FLUSHDB is never a NOP, and thus it should always be propagated.
Not doing that, could mean that if a module does something in that hook, and wants to
avoid issues of that hook being missing on the replica if the db is empty, it'll need to do complicated things.
So now FLUSHDB add call forceCommandPropagation, we will always propagate FLUSHDB.
Always propagating FLUSHDB seems like a safe approach that shouldn't have any drawbacks (other than looking odd)
This was mentioned in #8972
## Test section:
We actually found it while solving a race condition in the BGSAVE test (other.tcl).
It was found in extra_ci Daily Arm64 (test-libc-malloc).
```
[exception]: Executing test client: ERR Background save already in progress.
ERR Background save already in progress
```
It look like `r flushdb` trigger (schedule) a bgsave right after `waitForBgsave r` and before `r save`.
Changing flushdb to flushall, FLUSHALL will do a foreground save and then set the dirty counter to 0.
Set `old_li` to NULL to avoid linking it again on error.
Before the fix, loading an already existing library will cause the existing library to be added again. This cause not harm other then wrong statistics. The statistics that are effected by the issue are:
* `libraries_count` and `functions_count` returned by `function stats` command
* `used_memory_functions` returned on `info memory` command
* `functions.caches` returned on `memory stats` command
Unintentional change in #9644 (since RC1) meant that an empty `--save ""` config
from command line, wouldn't have clear any setting from the config file
Added tests to cover that, and improved test infra to take additional
command line args for redis-server
If we want to support bits that can be overlapping, we need to make sure
that:
1. we don't use the same bit for two return values.
2. values should be sorted so that prefer ones (matching more
bits) come first.
When user uses the same input key for SDIFF as the first one, the result must be empty, so we don't need to process the elements to test.
This method is like the one done in zset‘s `zsetChooseDiffAlgorithm`
Co-authored-by: Oran Agra <oran@redislabs.com>
The white list is done by setting a metatable on the global table before initializing
any library. The metatable set the `__newindex` field to a function that check
the white list before adding the field to the table. Fields which is not on the
white list are simply ignored.
After initialization phase is done we protect the global table and each table
that might be reachable from the global table. For each table we also protect
the table metatable if exists.
Use the new `lua_enablereadonlytable` Lua API to protect the global tables of
both evals scripts and functions. For eval scripts, the implemetation is easy,
We simply call `lua_enablereadonlytable` on the global table to turn it into
a readonly table.
On functions its more complecated, we want to be able to switch globals between
load run and function run. To achieve this, we create a new empty table that
acts as the globals table for function, we control the actual globals using metatable
manipulation. Notice that even if the user gets a pointer to the original tables, all
the tables are set to be readonly (using `lua_enablereadonlytable` Lua API) so he can
not change them. The following inlustration better explain the solution:
```
Global table {} <- global table metatable {.__index = __real_globals__}
```
The `__real_globals__` is set depends on the run context (function load or function call).
Why this solution is needed and its not enough to simply switch globals?
When we run in the context of function load and create our functions, our function gets
the current globals that was set when they were created. Replacing the globals after
the creation will not effect them. This is why this trick it mandatory.
Enables registration of an enum config that'll let the user pass multiple keywords that
will be combined with `|` as flags into the integer config value.
```
const char *enum_vals[] = {"none", "one", "two", "three"};
const int int_vals[] = {0, 1, 2, 4};
if (RedisModule_RegisterEnumConfig(ctx, "flags", 3, REDISMODULE_CONFIG_DEFAULT | REDISMODULE_CONFIG_BITFLAGS, enum_vals, int_vals, 4, getFlagsConfigCommand, setFlagsConfigCommand, NULL, NULL) == REDISMODULE_ERR) {
return REDISMODULE_ERR;
}
```
doing:
`config set moduleconfigs.flags "two three"` will result in 6 being passed to`setFlagsConfigCommand`.
Changes:
- When AOF is enabled **after** startup, the data accumulated during `AOF_WAIT_REWRITE`
will only be stored in a temp INCR AOF file. Only after the first AOFRW is successful, we will
add it to manifest file.
Before this fix, the manifest referred to the temp file which could cause a restart during that
time to load it without it's base.
- Add `aof_rewrites_consecutive_failures` info field for aofrw limiting implementation.
Now we can guarantee that these behaviors of MP-AOF are the same as before (past redis releases):
- When AOF is enabled after startup, the data accumulated during `AOF_WAIT_REWRITE` will only
be stored in a visible place. Only after the first AOFRW is successful, we will add it to manifest file.
- When disable AOF, we did not delete the AOF file in the past so there's no need to change that
behavior now (yet).
- When toggling AOF off and then on (could be as part of a full-sync), a crash or restart before the
first rewrite is completed, would result with the previous version being loaded (might not be right thing,
but that's what we always had).
The SHUTDOWN command has various flags to change it's default behavior,
but in some cases establishing a connection to redis is complicated and it's easier
for the management software to use signals. however, so far the signals could only
trigger the default shutdown behavior.
Here we introduce the option to control shutdown arguments for SIGTERM and SIGINT.
New config options:
`shutdown-on-sigint [nosave | save] [now] [force]`
`shutdown-on-sigterm [nosave | save] [now] [force]`
Implementation:
Support MULTI_ARG_CONFIG on createEnumConfig to support multiple enums to be applied as bit flags.
Co-authored-by: Oran Agra <oran@redislabs.com>
* Till now, replicas that were unable to persist, would still execute the commands
they got from the master, now they'll panic by default, and we add a new
`replica-ignore-disk-errors` config to change that.
* Till now, when a command failed on a replica or AOF-loading, it only logged a
warning and a stat, we add a new `propagation-error-behavior` config to allow
panicking in that state (may become the default one day)
Note that commands that fail on the replica can either indicate a bug that could
cause data inconsistency between the replica and the master, or they could be
in some cases (specifically in previous versions), a result of a command (e.g. EVAL)
that failed on the master, but still had to be propagated to fail on the replica as well.
Adds the `allow-cross-slot-keys` flag to Eval scripts and Functions to allow
scripts to access keys from multiple slots.
The default behavior is now that they are not allowed to do that (unlike before).
This is a breaking change for 7.0 release candidates (to be part of 7.0.0), but
not for previous redis releases since EVAL without shebang isn't doing this check.
Note that the check is done on both the keys declared by the EVAL / FCALL command
arguments, and also the ones used by the script when making a `redis.call`.
A note about the implementation, there seems to have been some confusion
about allowing access to non local keys. I thought I missed something in our
wider conversation, but Redis scripts do block access to non-local keys.
So the issue was just about cross slots being accessed.
1. Disk error and slave count checks didn't flag the transactions or counted correctly in command stats (regression from #10372 , 7.0 RC3)
2. RM_Call will reply the same way Redis does, in case of non-exisitng command or arity error
3. RM_WrongArtiy will consider the full command name
4. Use lowercase 'u' in "unknonw subcommand" (to align with "unknown command")
Followup work of #10127
This case is interesting because it originates from cron,
rather than from another command.
The idea came from looking at #9890 and #10573, and I was wondering if RM_Call
would work properly when `server.current_client == NULL`
