This should be able to find new bugs and regressions about the new
sorted set update function when ZADD is used to update an element
already existing.
The test is able to find the bug fixed at 2f282aee immediately.
it looks like on slow machines we're getting:
[err]: slave buffer are counted correctly in tests/unit/maxmemory.tcl
Expected condition '$slave_buf > 2*1024*1024' to be true (16914 > 2*1024*1024)
this is a result of the slave waking up too early and eating the
slave buffer before the traffic and the test ends.
on slower machines, the active defrag test tended to fail.
although the fragmentation ratio was below the treshold, the defragger was
still in the middle of a scan cycle.
this commit changes:
- the defragger uses the current fragmentation state, rather than the cache one
that is updated by server cron every 100ms. this actually fixes a bug of
starting one excess scan cycle
- the test lets the defragger use more CPU cycles, in hope that the defrag
will be faster, but also give it more time before we give up.
A) slave buffers didn't count internal fragmentation and sds unused space,
this caused them to induce eviction although we didn't mean for it.
B) slave buffers were consuming about twice the memory of what they actually needed.
- this was mainly due to sdsMakeRoomFor growing to twice as much as needed each time
but networking.c not storing more than 16k (partially fixed recently in 237a38737).
- besides it wasn't able to store half of the new string into one buffer and the
other half into the next (so the above mentioned fix helped mainly for small items).
- lastly, the sds buffers had up to 30% internal fragmentation that was wasted,
consumed but not used.
C) inefficient performance due to starting from a small string and reallocing many times.
what i changed:
- creating dedicated buffers for reply list, counting their size with zmalloc_size
- when creating a new reply node from, preallocate it to at least 16k.
- when appending a new reply to the buffer, first fill all the unused space of the
previous node before starting a new one.
other changes:
- expose mem_not_counted_for_evict info field for the benefit of the test suite
- add a test to make sure slave buffers are counted correctly and that they don't cause eviction
RESTORE now supports:
1. Setting LRU/LFU
2. Absolute-time TTL
Other related changes:
1. RDB loading will not override LRU bits when RDB file
does not contain the LRU opcode.
2. RDB loading will not set LRU/LFU bits if the server's
maxmemory-policy does not match.
Removing the fix about 50% of the times the test will not be able to
pass cleanly. It's very hard to write a test that will always fail, or
actually, it is possible but then it's likely that it will consistently
pass if we change some random bit, so better to use randomization here.
problems fixed:
* failing to read fragmentation information from jemalloc
* overflow in jemalloc fragmentation hint to the defragger
* test suite not triggering eviction after population
other fixes / improvements:
- LUA script memory isn't taken from zmalloc (taken from libc malloc)
so it can cause high fragmentation ratio to be displayed (which is false)
- there was a problem with "fragmentation" info being calculated from
RSS and used_memory sampled at different times (now sampling them together)
other details:
- adding a few more allocator info fields to INFO and MEMORY commands
- improve defrag test to measure defrag latency of big keys
- increasing the accuracy of the defrag test (by looking at real grag info)
this way we can use an even lower threshold and still avoid false positives
- keep the old (total) "fragmentation" field unchanged, but add new ones for spcific things
- add these the MEMORY DOCTOR command
- deduct LUA memory from the rss in case of non jemalloc allocator (one for which we don't "allocator active/used")
- reduce sampling rate of the rss and allocator info
After checking with the community via Twitter (here:
https://twitter.com/antirez/status/915130876861788161) the verdict was to
use ":". However I later realized, after users lamented the fact that
it's hard to copy IDs just with double click, that this was the reason
why I moved to "." in the first instance. Fortunately "-", that was the
other option with most votes, also gets selected with double click on
most terminal applications on Linux and MacOS.
So my reasoning was:
1) We can't retain "." because it's actually confusing to newcomers, it
looks like a floating number, people may be tricked into thinking they
can order IDs numerically as floats.
2) Moving to a double-click-to-select format is much better. People will
work with such IDs for long time when coding / debugging. Why making now
a choice that will impact this for the next years?
The only other viable option was "-", and that's what I did. Thanks.
getLongLongFromObject calls string2ll which has this line:
/* Return if not all bytes were used. */
so if you pass an sds with 3 characters "1\01" it will fail.
but getLongDoubleFromObject calls strtold, and considers it ok if eptr[0]==`\0`
i.e. if the end of the string found by strtold ends with null terminator
127.0.0.1:6379> set a 1
OK
127.0.0.1:6379> setrange a 2 2
(integer) 3
127.0.0.1:6379> get a
"1\x002"
127.0.0.1:6379> incrbyfloat a 2
"3"
127.0.0.1:6379> get a
"3"
This commit closes issue #3698, at least for now, since the root cause
was not fixed: the bounding box function, for huge radiuses, does not
return a correct bounding box, there are points still within the radius
that are left outside.
So when using GEORADIUS queries with radiuses in the order of 5000 km or
more, it was possible to see, at the edge of the area, certain points
not correctly reported.
Because the bounding box for now was used just as an optimization, and
such huge radiuses are not common, for now the optimization is just
switched off when the radius is near such magnitude.
Three test cases found by the Continuous Integration test were added, so
that we can easily trigger the bug again, both for regression testing
and in order to properly fix it as some point in the future.
Apparently 1.4 is too low compared to what you get in certain setups
(including mine). I raised it to 1.55 that hopefully is still enough to
test that the fragmentation went down from 1.7 but without incurring in
issues, however the test setup may be still fragile so certain times this
may lead to false positives again, it's hard to test for these things
in a determinsitic way.
Related to #3786.
Testing with Solaris C compiler (SunOS 5.11 11.2 sun4v sparc sun4v)
there were issues compiling due to atomicvar.h and running the
tests also failed because of "tail" usage not conform with Solaris
tail implementation. This commit fixes both the issues.
The test now uses more diverse radius sizes, especially sizes near or
greater the whole earth surface are used, that are known to trigger edge
cases. Moreover the PRNG seeding was probably resulting into the same
sequence tested over and over again, now seeding unsing the current unix
time in milliseconds.
Related to #3631.
By grepping the continuous integration errors log a number of GEORADIUS
tests failures were detected.
Fortunately when a GEORADIUS failure happens, the test suite logs enough
information in order to reproduce the problem: the PRNG seed,
coordinates and radius of the query.
By reproducing the issues, three different bugs were discovered and
fixed in this commit. This commit also improves the already good
reporting of the fuzzer and adds the failure vectors as regression
tests.
The issues found:
1. We need larger squares around the poles in order to cover the area
requested by the user. There were already checks in order to use a
smaller step (larger squares) but the limit set (+/- 67 degrees) is not
enough in certain edge cases, so 66 is used now.
2. Even near the equator, when the search area center is very near the
edge of the square, the north, south, west or ovest square may not be
able to fully cover the specified radius. Now a test is performed at the
edge of the initial guessed search area, and larger squares are used in
case the test fails.
3. Because of rounding errors between Redis and Tcl, sometimes the test
signaled false positives. This is now addressed.
Whenever possible the original code was improved a bit in other ways. A
debugging example stanza was added in order to make the next debugging
session simpler when the next bug is found.
This fix, provided by Paul Kulchenko (@pkulchenko), allows the Lua
scripting engine to evaluate statements with a trailing comment like the
following one:
EVAL "print() --comment" 0
Lua can't parse the above if the string does not end with a newline, so
now a final newline is always added automatically. This does not change
the SHA1 of scripts since the SHA1 is computed on the body we pass to
EVAL, without the other code we add to register the function.
Close#2951.
64 bit double math is not enough to make the test passing, and rounding
to 1.2999999 instead of 1.23 is not an error in the implementation.
Valgrind and sometimes other archs are not able to work with 80 bit
doubles.
An user raised a question about a given behavior of PFCOUNT. Added a
test to show the behavior (union) is correct when most of the items are
in common.
HINCRBY* tests later used the value "tmp" that was sometimes generated
by the random key generation function. The result was ovewriting what
Tcl expected to be inside Redis with another value, causing the next
HSTRLEN test to fail.
Georadius works by computing the center + neighbors squares covering all
the area of the specified position and radius. Then a distance filter is
used to remove elements which are actually outside the range.
When a huge radius is used, like 5000 km or more, adjacent neighbors may
collide and be the same, leading to the reporting of the same element
multiple times. This only happens in the edge case of huge radius but is
not ideal.
A robust but slow solution would involve qsorting the range to remove
all the duplicates. However since the collisions are only in adjacent
boxes, for the way they are ordered in the code, it is much faster to
just check if the current box is the same as the previous one processed.
This commit adds a regression test for the bug.
Fixes#2767.
