The new ROLE command is designed in order to provide a client with
informations about the replication in a fast and easy to use way
compared to the INFO command where the same information is also
available.
Every log contains, just after the pid, a single character that provides
information about the role of an instance:
S - Slave
M - Master
C - Writing child
X - Sentinel
The error when the target key is busy was a generic one, while it makes
sense to be able to distinguish between the target key busy error and
the others easily.
When the listening sockets readable event is fired, we have the chance
to accept multiple clients instead of accepting a single one. This makes
Redis more responsive when there is a mass-connect event (for example
after the server startup), and in workloads where a connect-disconnect
pattern is used often, so that multiple clients are waiting to be
accepted continuously.
As a side effect, this commit makes the LOADING, BUSY, and similar
errors much faster to deliver to the client, making Redis more
responsive when there is to return errors to inform the clients that the
server is blocked in an not interruptible operation.
adjustOpenFilesLimit() and clusterUpdateSlotsWithConfig() that were
assuming uint64_t is the same as unsigned long long, which is true
probably for all the systems out there that we target, but still GCC
emitted a warning since technically they are two different types.
To test the bitfield array of counters set/get macros from the Redis Tcl
suite is hard, so a specialized command that is able to test the
internals was developed.
Bug found by the continuous integration test running the Redis
with valgrind:
==6245== Invalid read of size 8
==6245== at 0x4C2DEEF: memcpy@GLIBC_2.2.5 (mc_replace_strmem.c:876)
==6245== by 0x41F9E6: freeMemoryIfNeeded (redis.c:3010)
==6245== by 0x41D2CC: processCommand (redis.c:2069)
memmove() size argument was accounting for an extra element, going
outside the bounds of the array.
In this commit:
* Decrement steps are semantically differentiated from the reserved FDs.
Previously both values were 32 but the meaning was different.
* Make it clear that we save setrlimit errno.
* Don't explicitly handle wrapping of 'f', but prevent it from
happening.
* Add comments to make the function flow more readable.
This integrates PR #1630
Also update the original REDIS_EVENTLOOP_FDSET_INCR to
include REDIS_MIN_RESERVED_FDS. REDIS_EVENTLOOP_FDSET_INCR
exists to make sure more than (maxclients+RESERVED) entries
are allocated, but we can only guarantee that if we include
the current value of REDIS_MIN_RESERVED_FDS as a minimum
for the INCR size.
Fun fact: rlim_t is an unsigned long long on all platforms.
Continually subtracting from a rlim_t makes it get smaller
and smaller until it wraps, then you're up to 2^64-1.
This was causing an infinite loop on Redis startup if
your ulimit was extremely (almost comically) low.
The case of (f > oldlimit) would never be met in a case like:
f = 150
while (f > 20) f -= 128
Since f is unsigned, it can't go negative and would
take on values of:
Iteration 1: 150 - 128 => 22
Iteration 2: 22 - 128 => 18446744073709551510
Iterations 3-∞: ...
To catch the wraparound, we use the previous value of f
stored in limit.rlimit_cur. If we subtract from f and
get a larger number than the value it had previously,
we print an error and exit since we don't have enough
file descriptors to help the user at this point.
Thanks to @bs3g for the inspiration to fix this problem.
Patches existed from @bs3g at antirez#1227, but I needed to repair a few other
parts of Redis simultaneously, so I didn't get a chance to use them.
The log messages about open file limits have always
been slightly opaque and confusing. Here's an attempt to
fix their wording, detail, and meaning. Users will have a
better understanding of how to fix very common problems
with these reworded messages.
Also, we handle a new error case when maxclients becomes less
than one, essentially rendering the server unusable. We
now exit on startup instead of leaving the user with a server
unable to handle any connections.
This fixes antirez#356 as well.
32 was the additional number of file descriptors Redis
would reserve when managing a too-low ulimit. The
number 32 was in too many places statically, so now
we use a macro instead that looks more appropriate.
When Redis sets up the server event loop, it uses:
server.maxclients+REDIS_EVENTLOOP_FDSET_INCR
So, when reserving file descriptors, it makes sense to
reserve at least REDIS_EVENTLOOP_FDSET_INCR FDs instead
of only 32. Currently, REDIS_EVENTLOOP_FDSET_INCR is
set to 128 in redis.h.
Also, I replaced the static 128 in the while f < old loop
with REDIS_EVENTLOOP_FDSET_INCR as well, which results
in no change since it was already 128.
Impact: Users now need at least maxclients+128 as
their open file limit instead of maxclients+32 to obtain
actual "maxclients" number of clients. Redis will carve
the extra REDIS_EVENTLOOP_FDSET_INCR file descriptors it
needs out of the "maxclients" range instead of failing
to start (unless the local ulimit -n is too low to accomidate
the request).
Obtaining the RSS (Resident Set Size) info is slow in Linux and OSX.
This slowed down the generation of the INFO 'memory' section.
Since the RSS does not require to be a real-time measurement, we
now sample it with server.hz frequency (10 times per second by default)
and use this value both to show the INFO rss field and to compute the
fragmentation ratio.
Practically this does not make any difference for memory profiling of
Redis but speeds up the INFO call significantly.
Uname was profiled to be a slow syscall. It produces always the same
output in the context of a single execution of Redis, so calling it at
every INFO output generation does not make too much sense.
The uname utsname structure was modified as a static variable. At the
same time a static integer was added to check if we need to call uname
the first time.
This is an improvement over the previous eviction algorithm where we use
an eviction pool that is persistent across evictions of keys, and gets
populated with the best candidates for evictions found so far.
It allows to approximate LRU eviction at a given number of samples
better than the previous algorithm used.
For testing purposes it is handy to have a very high resolution of the
LRU clock, so that it is possible to experiment with scripts running in
just a few seconds how the eviction algorithms works.
This commit allows Redis to use the cached LRU clock, or a value
computed on demand, depending on the resolution. So normally we have the
good performance of a precomputed value, and a clock that wraps in many
days using the normal resolution, but if needed, changing a define will
switch behavior to an high resolution LRU clock.
Previously we used zunionInterGetKeys(), however after this function was
fixed to account for the destination key (not needed when the API was
designed for "diskstore") the two set of commands can no longer be served
by an unique keys-extraction function.
This API originated from the "diskstore" experiment, not for Redis
Cluster itself, so there were legacy/useless things trying to
differentiate between keys that are going to be overwritten and keys
that need to be fetched from disk (preloaded).
All useless with Cluster, so removed with the result of code
simplification.
used_memory_peak only updates in serverCron every server.hz,
but Redis can use more memory and a user can request memory
INFO before used_memory_peak gets updated in the next
cron run.
This patch updates used_memory_peak to the current
memory usage if the current memory usage is higher
than the recorded used_memory_peak value.
(And it only calls zmalloc_used_memory() once instead of
twice as it was doing before.)
If you launch redis with `redis-server --sentinel` then
in a ps, your output only says "redis-server IP:Port" — this
patch changes the proc title to include [sentinel] or
[cluster] depending on the current server mode:
e.g. "redis-server IP:Port [sentinel]"
"redis-server IP:Port [cluster]"
Report the actual port used for the listening attempt instead of
server.port.
Originally, Redis would just listen on server.port.
But, with clustering, Redis uses a Cluster Port too,
so we can't say server.port is always where we are listening.
If you tried to launch Redis with a too-high port number (any
port where Port+10000 > 65535), Redis would refuse to start, but
only print an error saying it can't connect to the Redis port.
This patch fixes much confusions.
The code tried to obtain the configuration file absolute path after
processing the configuration file. However if config file was a relative
path and a "dir" statement was processed reading the config, the absolute
path obtained was wrong.
With this fix the absolute path is obtained before processing the
configuration while the server is still in the original directory where
it was executed.
server.unixtime and server.mstime are cached less precise timestamps
that we use every time we don't need an accurate time representation and
a syscall would be too slow for the number of calls we require.
Such an example is the initialization and update process of the last
interaction time with the client, that is used for timeouts.
However rdbLoad() can take some time to load the DB, but at the same
time it did not updated the time during DB loading. This resulted in the
bug described in issue #1535, where in the replication process the slave
loads the DB, creates the redisClient representation of its master, but
the timestamp is so old that the master, under certain conditions, is
sensed as already "timed out".
Thanks to @yoav-steinberg and Redis Labs Inc for the bug report and
analysis.
A system similar to the RDB write error handling is used, in which when
we can't write to the AOF file, writes are no longer accepted until we
are able to write again.
For fsync == always we still abort on errors since there is currently no
easy way to avoid replying with success to the user otherwise, and this
would violate the contract with the user of only acknowledging data
already secured on disk.
The API is one of the bulding blocks of CLUSTER FAILOVER command that
executes a manual failover in Redis Cluster. However exposed as a
command that the user can call directly, it makes much simpler to
upgrade a standalone Redis instance using a slave in a safer way.
The commands works like that:
CLIENT PAUSE <milliesconds>
All the clients that are not slaves and not in MONITOR state are paused
for the specified number of milliesconds. This means that slaves are
normally served in the meantime.
At the end of the specified amount of time all the clients are unblocked
and will continue operations normally. This command has no effects on
the population of the slow log, since clients are not blocked in the
middle of operations but only when there is to process new data.
Note that while the clients are unblocked, still new commands are
accepted and queued in the client buffer, so clients will likely not
block while writing to the server while the pause is active.
In high RPS environments, the default listen backlog is not sufficient, so
giving users the power to configure it is the right approach, especially
since it requires only minor modifications to the code.
A client can enter a special cluster read-only mode using the READONLY
command: if the client read from a slave instance after this command,
for slots that are actually served by the instance's master, the queries
will be processed without redirection, allowing clients to read from
slaves (but without any kind fo read-after-write guarantee).
The READWRITE command can be used in order to exit the readonly state.
When a slave was disconnected from its master the replication offset was
reported as -1. Now it is reported as the replication offset of the
previous master, so that failover can be performed using this value in
order to try to select a slave with more processed data from a set of
slaves of the old master.
During the refactoring of blocking operations, commit
82b672f633, a bug was introduced where
a milliseconds time is compared to a seconds time, so all the clients
always appear to timeout if timeout is set to non-zero value.
Thanks to Jonathan Leibiusky for finding the bug and helping verifying
the cause and fix.
Some are just to know if the master is down, and in this case the runid
in the request is set to "*", others are actually in order to seek for a
vote and get elected. In the latter case the runid is set to the runid
of the instance seeking for the vote.
All the internal state of cluster involving time is now using mstime_t
and mstime() in order to use milliseconds resolution.
Also the clusterCron() function is called with a 10 hz frequency instead
of 1 hz.
The cluster node_timeout must be also configured in milliseconds by the
user in redis.conf.
Example:
db0:keys=221913,expires=221913,avg_ttl=655
The algorithm uses a running average with only two samples (current and
previous). Keys found to be expired are considered at TTL zero even if
the actual TTL can be negative.
The TTL is reported in milliseconds.
We don't want to repeat a fast cycle too soon, the previous code was
broken, we need to wait two times the period *since* the start of the
previous cycle in order to avoid there is an even space between cycles:
.-> start .-> second start
| |
+-------------+-------------+--------------+
| first cycle | pause | second cycle |
+-------------+-------------+--------------+
The second and first start must be PERIOD*2 useconds apart hence the *2
in the new code.
This commit makes the fast collection cycle time configurable, at
the same time it does not allow to run a new fast collection cycle
for the same amount of time as the max duration of the fast
collection cycle.
The main idea here is that when we are no longer to expire keys at the
rate the are created, we can't block more in the normal expire cycle as
this would result in too big latency spikes.
For this reason the commit introduces a "fast" expire cycle that does
not run for more than 1 millisecond but is called in the beforeSleep()
hook of the event loop, so much more often, and with a frequency bound
to the frequency of executed commnads.
The fast expire cycle is only called when the standard expiration
algorithm runs out of time, that is, consumed more than
REDIS_EXPIRELOOKUPS_TIME_PERC of CPU in a given cycle without being able
to take the number of already expired keys that are yet not collected
to a number smaller than 25% of the number of keys.
You can test this commit with different loads, but a simple way is to
use the following:
Extreme load with pipelining:
redis-benchmark -r 100000000 -n 100000000 \
-P 32 set ele:rand:000000000000 foo ex 2
Remove the -P32 in order to avoid the pipelining for a more real-world
load.
In another terminal tab you can monitor the Redis behavior with:
redis-cli -i 0.1 -r -1 info keyspace
and
redis-cli --latency-history
Note: this commit will make Redis printing a lot of debug messages, it
is not a good idea to use it in production.
