When using `INFO ALL <section>`, when `section` is a specific module section.
Redis will not print the additional section(s).
The fix in this case, will search the modules info sections if the user provided additional sections to `ALL`.
Co-authored-by: Oran Agra <oran@redislabs.com>
This PR mainly deals with 2 crashes introduced in #9357,
and fix the QUICKLIST-PACKED-THRESHOLD mess in external test mode.
1. Fix crash due to deleting an entry from a compress quicklistNode
When inserting a large element, we need to create a new quicklistNode first,
and then delete its previous element, if the node where the deleted element is
located is compressed, it will cause a crash.
Now add `dont_compress` to quicklistNode, if we want to use a quicklistNode
after some operation, we can use this flag like following:
```c
node->dont_compress = 1; /* Prevent to be compressed */
some_operation(node); /* This operation might try to compress this node */
some_other_operation(node); /* We can use this node without decompress it */
node->dont_compress = 0; /* Re-able compression */
quicklistCompressNode(node);
```
Perhaps in the future, we could just disable the current entry from being
compressed during the iterator loop, but that would require more work.
2. Fix crash due to wrongly split quicklist
before #9357, the offset param of _quicklistSplitNode() will not negative.
For now, when offset is negative, the split extent will be wrong.
following example:
```c
int orig_start = after ? offset + 1 : 0;
int orig_extent = after ? -1 : offset;
int new_start = after ? 0 : offset;
int new_extent = after ? offset + 1 : -1;
# offset: -2, after: 1, node->count: 2
# current wrong range: [-1,-1] [0,-1]
# correct range: [1,-1] [0, 1]
```
Because only `_quicklistInsert()` splits the quicklistNode and only
`quicklistInsertAfter()`, `quicklistInsertBefore()` call _quicklistInsert(),
so `quicklistReplaceEntry()` and `listTypeInsert()` might occur this crash.
But the iterator of `listTypeInsert()` is alway from head to tail(iter->offset is
always positive), so it is not affected.
The final conclusion is this crash only occur when we insert a large element
with negative index into a list, that affects `LSET` command and `RM_ListSet`
module api.
3. In external test mode, we need to restore quicklist packed threshold after
when the end of test.
4. Show `node->count` in quicklistRepr().
5. Add new tcl proc `config_get_set` to support restoring config in tests.
When using cli to add node, there can potentially be a race condition in
which all nodes presenting cluster state o.k even though the added node
did not yet meet all cluster nodes.
this adds another utility function to wait until all cluster nodes see the same cluster size
Add a new "D" flag to RM_Call which runs whatever verification the user requests,
but returns before the actual execution of the command.
It automatically enables returning error messages as CallReply objects to distinguish
success (NULL) from failure (CallReply returned).
When RM_Call was used with `M` (reject OOM), `W` (reject writes),
as well as `S` (rejecting stale or write commands in "Script mode"),
it would have only checked the command flags, but not the declared
script flag in case it's a command that runs a script.
Refactoring: extracts out similar code in server.c's processCommand
to be usable in RM_Call as well.
Bugfix:
with the scenario if we force assigned a slot to other master,
old master will lose the slot ownership, then old master will
call the function delKeysInSlot() to delete all keys which in
the slot. These delete operations should replicate to replicas,
avoid the data divergence issue in master and replicas.
Additionally, in this case, we now call:
* signalModifiedKey (to invalidate WATCH)
* moduleNotifyKeyspaceEvent (key space notification for modules)
* dirty++ (to signal that the persistence file may be outdated)
Co-authored-by: weimeng <weimeng@didiglobal.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Check the validity of the value before performing the create operation,
prevents new data from being generated even if the request fails to execute.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: chendianqiang <chendianqiang@meituan.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
Redis 7.0 has #9890 which added an assertion when the propagation queue
was not flushed and we got to beforeSleep.
But it turns out that when processCommands calls getNodeByQuery and
decides to reject the command, it can lead to a key that was lazy
expired and is deleted without later flushing the propagation queue.
This change prevents lazy expiry from deleting the key at this stage
(not as part of a command being processed in `call`)
The PR reverts the changes made on #10969.
The reason for revert was trigger because of occasional test failure
that started after the PR was merged.
The issue is that if there is a lazy expire during the command invocation,
the `del` command is added to the replication stream after the command
placeholder. So the logical order on the primary is:
* Delete the key (lazy expiration)
* Command invocation
But the replication stream gets it the other way around:
* Command invocation (because the command is written into the placeholder)
* Delete the key (lazy expiration)
So if the command write to the key that was just lazy expired we will get
inconsistency between primary and replica.
One solution we considered is to add another lazy expire replication stream
and write all the lazy expire there. Then when replicating, we will replicate the
lazy expire replication stream first. This will solve this specific test failure but
we realize that the issues does not ends here and the more we dig the more
problems we find.One of the example we thought about (that can actually
crashes Redis) is as follow:
* User perform SINTERSTORE
* When Redis tries to fetch the second input key it triggers lazy expire
* The lazy expire trigger a module logic that deletes the first input key
* Now Redis hold the robj of the first input key that was actually freed
We believe we took the wrong approach and we will come up with another
PR that solve the problem differently, for now we revert the changes so we
will not have the tests failure.
Notice that not the entire code was revert, some parts of the PR are changes
that we would like to keep. The changes that **was** reverted are:
* Saving a placeholder for replication at the beginning of the command (`call` function)
* Order of the replication stream on active expire and eviction (we will decide how
to handle it correctly on follow up PR)
* `Spop` changes are no longer needed (because we reverted the placeholder code)
Changes that **was not** reverted:
* On expire/eviction, wrap the `del` and the notification effect in a multi exec.
* `PropagateNow` function can still accept a special dbid, -1, indicating not to replicate select.
* Keep optimisation for reusing the `alsoPropagate` array instead of allocating it each time.
Tests:
* All tests was kept and only few tests was modify to work correctly with the changes
* Test was added to verify that the revert fixes the issues.
* Support BUILD_TLS=module to be loaded as a module via config file or
command line. e.g. redis-server --loadmodule redis-tls.so
* Updates to redismodule.h to allow it to be used side by side with
server.h by defining REDISMODULE_CORE_MODULE
* Changes to server.h, redismodule.h and module.c to avoid repeated
type declarations (gcc 4.8 doesn't like these)
* Add a mechanism for non-ABI neutral modules (ones who include
server.h) to refuse loading if they detect not being built together with
redis (release.c)
* Fix wrong signature of RedisModuleDefragFunc, this could break
compilation of a module, but not the ABI
* Move initialization of listeners in server.c to be after loading
the modules
* Config TLS after initialization of listeners
* Init cluster after initialization of listeners
* Add TLS module to CI
* Fix a test suite race conditions:
Now that the listeners are initialized later, it's not sufficient to
wait for the PID message in the log, we need to wait for the "Server
Initialized" message.
* Fix issues with moduleconfigs test as a result from start_server
waiting for "Server Initialized"
* Fix issues with modules/infra test as a result of an additional module
present
Notes about Sentinel:
Sentinel can't really rely on the tls module, since it uses hiredis to
initiate connections and depends on OpenSSL (won't be able to use any
other connection modules for that), so it was decided that when TLS is
built as a module, sentinel does not support TLS at all.
This means that it keeps using redis_tls_ctx and redis_tls_client_ctx directly.
Example code of config in redis-tls.so(may be use in the future):
RedisModuleString *tls_cfg = NULL;
void tlsInfo(RedisModuleInfoCtx *ctx, int for_crash_report) {
UNUSED(for_crash_report);
RedisModule_InfoAddSection(ctx, "");
RedisModule_InfoAddFieldLongLong(ctx, "var", 42);
}
int tlsCommand(RedisModuleCtx *ctx, RedisModuleString **argv, int argc)
{
if (argc != 2) return RedisModule_WrongArity(ctx);
return RedisModule_ReplyWithString(ctx, argv[1]);
}
RedisModuleString *getStringConfigCommand(const char *name, void *privdata) {
REDISMODULE_NOT_USED(name);
REDISMODULE_NOT_USED(privdata);
return tls_cfg;
}
int setStringConfigCommand(const char *name, RedisModuleString *new, void *privdata, RedisModuleString **err) {
REDISMODULE_NOT_USED(name);
REDISMODULE_NOT_USED(err);
REDISMODULE_NOT_USED(privdata);
if (tls_cfg) RedisModule_FreeString(NULL, tls_cfg);
RedisModule_RetainString(NULL, new);
tls_cfg = new;
return REDISMODULE_OK;
}
int RedisModule_OnLoad(void *ctx, RedisModuleString **argv, int argc)
{
....
if (RedisModule_CreateCommand(ctx,"tls",tlsCommand,"",0,0,0) == REDISMODULE_ERR)
return REDISMODULE_ERR;
if (RedisModule_RegisterStringConfig(ctx, "cfg", "", REDISMODULE_CONFIG_DEFAULT, getStringConfigCommand, setStringConfigCommand, NULL, NULL) == REDISMODULE_ERR)
return REDISMODULE_ERR;
if (RedisModule_LoadConfigs(ctx) == REDISMODULE_ERR) {
if (tls_cfg) {
RedisModule_FreeString(ctx, tls_cfg);
tls_cfg = NULL;
}
return REDISMODULE_ERR;
}
...
}
Co-authored-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
This PR includes 2 missed test cases of XDEL and XGROUP CREATE command
1. one test case: XDEL delete multiply id once
2. 3 test cases: XGROUP CREATE has ENTRIESREAD parameter,
which equal 0 (special positive number), 3 and negative value.
Co-authored-by: Ubuntu <lucas.guang.yang1@huawei.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
Currently, we call zfree(cmd->args), but the argument array
needs to be freed recursively (there might be sub-args).
Also fixed memory leaks on cmd->tips and cmd->history.
Fixes#11145
Fix replication inconsistency on modules that uses key space notifications.
### The Problem
In general, key space notifications are invoked after the command logic was
executed (this is not always the case, we will discuss later about specific
command that do not follow this rules). For example, the `set x 1` will trigger
a `set` notification that will be invoked after the `set` logic was performed, so
if the notification logic will try to fetch `x`, it will see the new data that was written.
Consider the scenario on which the notification logic performs some write
commands. for example, the notification logic increase some counter,
`incr x{counter}`, indicating how many times `x` was changed.
The logical order by which the logic was executed is has follow:
```
set x 1
incr x{counter}
```
The issue is that the `set x 1` command is added to the replication buffer
at the end of the command invocation (specifically after the key space
notification logic was invoked and performed the `incr` command).
The replication/aof sees the commands in the wrong order:
```
incr x{counter}
set x 1
```
In this specific example the order is less important.
But if, for example, the notification would have deleted `x` then we would
end up with primary-replica inconsistency.
### The Solution
Put the command that cause the notification in its rightful place. In the
above example, the `set x 1` command logic was executed before the
notification logic, so it should be added to the replication buffer before
the commands that is invoked by the notification logic. To achieve this,
without a major code refactoring, we save a placeholder in the replication
buffer, when finishing invoking the command logic we check if the command
need to be replicated, and if it does, we use the placeholder to add it to the
replication buffer instead of appending it to the end.
To be efficient and not allocating memory on each command to save the
placeholder, the replication buffer array was modified to reuse memory
(instead of allocating it each time we want to replicate commands).
Also, to avoid saving a placeholder when not needed, we do it only for
WRITE or MAY_REPLICATE commands.
#### Additional Fixes
* Expire and Eviction notifications:
* Expire/Eviction logical order was to first perform the Expire/Eviction
and then the notification logic. The replication buffer got this in the
other way around (first notification effect and then the `del` command).
The PR fixes this issue.
* The notification effect and the `del` command was not wrap with
`multi-exec` (if needed). The PR also fix this issue.
* SPOP command:
* On spop, the `spop` notification was fired before the command logic
was executed. The change in this PR would have cause the replication
order to be change (first `spop` command and then notification `logic`)
although the logical order is first the notification logic and then the
`spop` logic. The right fix would have been to move the notification to
be fired after the command was executed (like all the other commands),
but this can be considered a breaking change. To overcome this, the PR
keeps the current behavior and changes the `spop` code to keep the right
logical order when pushing commands to the replication buffer. Another PR
will follow to fix the SPOP properly and match it to the other command (we
split it to 2 separate PR's so it will be easy to cherry-pick this PR to 7.0 if
we chose to).
#### Unhanded Known Limitations
* key miss event:
* On key miss event, if a module performed some write command on the
event (using `RM_Call`), the `dirty` counter would increase and the read
command that cause the key miss event would be replicated to the replication
and aof. This problem can also happened on a write command that open
some keys but eventually decides not to perform any action. We decided
not to handle this problem on this PR because the solution is complex
and will cause additional risks in case we will want to cherry-pick this PR.
We should decide if we want to handle it in future PR's. For now, modules
writers is advice not to perform any write commands on key miss event.
#### Testing
* We already have tests to cover cases where a notification is invoking write
commands that are also added to the replication buffer, the tests was modified
to verify that the replica gets the command in the correct logical order.
* Test was added to verify that `spop` behavior was kept unchanged.
* Test was added to verify key miss event behave as expected.
* Test was added to verify the changes do not break lazy expiration.
#### Additional Changes
* `propagateNow` function can accept a special dbid, -1, indicating not
to replicate `select`. We use this to replicate `multi/exec` on `propagatePendingCommands`
function. The side effect of this change is that now the `select` command
will appear inside the `multi/exec` block on the replication stream (instead of
outside of the `multi/exec` block). Tests was modified to match this new behavior.
Make sure the script calls in the tests declare the keys they intend to use.
Do that with minimal changes to existing lines (so many scripts still have a hard coded key names)
Co-authored-by: Valentino Geron <valentino@redis.com>
This pr mainly has the following four changes:
1. Add missing lua_pop in `luaGetFromRegistry`.
This bug affects `redis.register_function`, where `luaGetFromRegistry` in
`luaRegisterFunction` will return null when we call `redis.register_function` nested.
.e.g
```
FUNCTION LOAD "#!lua name=mylib \n local lib=redis \n lib.register_function('f2', function(keys, args) lib.register_function('f1', function () end) end)"
fcall f2 0
````
But since we exit when luaGetFromRegistry returns null, it does not cause the stack to grow indefinitely.
3. When getting `REGISTRY_RUN_CTX_NAME` from the registry, use `serverAssert`
instead of error return. Since none of these lua functions are registered at the time
of function load, scriptRunCtx will never be NULL.
4. Add `serverAssert` for `luaLdbLineHook`, `luaEngineLoadHook`.
5. Remove `luaGetFromRegistry` from `redis_math_random` and
`redis_math_randomseed`, it looks like they are redundant.
some skip tags were missing on some tests
avoid using HELLO if denytags has resp3 (target server may not support it)
Co-authored-by: Valentino Geron <valentino@redis.com>
`bitfield` with `get` may not be readonly.
```
127.0.0.1:6384> acl setuser hello on nopass %R~* +@all
OK
127.0.0.1:6384> auth hello 1
OK
127.0.0.1:6384> bitfield hello set i8 0 1
(error) NOPERM this user has no permissions to access one of the keys used as arguments
127.0.0.1:6384> bitfield hello set i8 0 1 get i8 0
1) (integer) 0
2) (integer) 1
```
Co-authored-by: Oran Agra <oran@redislabs.com>
* some of the tests don't clean the key the use
* marked tests with `{singledb:skip}` if they use SELECT
Co-authored-by: Valentino Geron <valentino@redis.com>
Fix#11030, use lua_rawget to avoid triggering metatables.
#11030 shows how return `_G` from the Lua script (either function or eval), cause the
Lua interpreter to Panic and the Redis processes to exit with error code 1.
Though return `_G` only panic on Redis 7 and 6.2.7, the underline issue exists on older
versions as well (6.0 and 6.2). The underline issue is returning a table with a metatable
such that the metatable raises an error.
The following example demonstrate the issue:
```
127.0.0.1:6379> eval "local a = {}; setmetatable(a,{__index=function() foo() end}) return a" 0
Error: Server closed the connection
```
```
PANIC: unprotected error in call to Lua API (user_script:1: Script attempted to access nonexistent global variable 'foo')
```
The Lua panic happened because when returning the result to the client, Redis needs to
introspect the returning table and transform the table into a resp. In order to scan the table,
Redis uses `lua_gettable` api which might trigger the metatable (if exists) and might raise an error.
This code is not running inside `pcall` (Lua protected call), so raising an error causes the
Lua to panic and exit. Notice that this is not a crash, its a Lua panic that exit with error code 1.
Returning `_G` panics on Redis 7 and 6.2.7 because on those versions `_G` has a metatable
that raises error when trying to fetch a none existing key.
### Solution
Instead of using `lua_gettable` that might raise error and cause the issue, use `lua_rawget`
that simply return the value from the table without triggering any metatable logic.
This is promised not to raise and error.
The downside of this solution is that it might be considered as breaking change, if someone
rely on metatable in the returned value. An alternative solution is to wrap this entire logic
with `pcall` (Lua protected call), this alternative require a much bigger refactoring.
### Back Porting
The same fix will work on older versions as well (6.2, 6.0). Notice that on those version,
the issue can cause Redis to crash if inside the metatable logic there is an attempt to accesses
Redis (`redis.call`). On 7.0, there is not crash and the `redis.call` is executed as if it was done
from inside the script itself.
### Tests
Tests was added the verify the fix
Gossip the cluster node blacklist in ping and pong messages.
This means that CLUSTER FORGET doesn't need to be sent to all nodes in a cluster.
It can be sent to one or more nodes and then be propagated to the rest of them.
For each blacklisted node, its node id and its remaining blacklist TTL is gossiped in a
cluster bus ping extension (introduced in #9530).
A timing issue like this was reported in freebsd daily CI:
```
*** [err]: Sanity test push cmd after resharding in tests/unit/cluster/cli.tcl
Expected 'CLUSTERDOWN The cluster is down' to match '*MOVED*'
```
We additionally wait for each node to reach a consensus on the cluster
state in wait_for_condition to avoid the cluster down error.
The fix just like #10495, quoting madolson's comment:
Cluster check just verifies the the config state is self-consistent,
waiting for cluster_state to be okay is an independent check that all
the nodes actually believe each other are healthy.
At the same time i noticed that unit/moduleapi/cluster.tcl has an exact
same test, may have the same problem, also modified it.
The temporary array for deleted entries reply of XAUTOCLAIM was
insufficient, but also in fact the COUNT argument should be used to
control the size of the reply, so instead of terminating the loop by
only counting the claimed entries, we'll count deleted entries as well.
Fix#10968
Addresses CVE-2022-31144
In the newly added cluster hostnames test, the primary is failing over during the reboot
for valgrind so we are validating the wrong node. This change just sets the replica to
prevent taking over, which seems to fix the test.
We could have also set the timeout higher, but it slows down the test.
In #9389, we add a new `cluster-port` config and make cluster bus port configurable,
and currently redis-cli --cluster create/add-node doesn't support with a configurable `cluster-port` instance.
Because redis-cli uses the old way (port + 10000) to send the `CLUSTER MEET` command.
Now we add this support on redis-cli `--cluster`, note we don't need to explicitly pass in the
`cluster-port` parameter, we can get the real `cluster-port` of the node in `clusterManagerNodeLoadInfo`,
so the `--cluster create` and `--cluster add-node` interfaces have not changed.
We will use the `cluster-port` when we are doing `CLUSTER MEET`, also note that `CLUSTER MEET` bus-port
parameter was added in 4.0, so if the bus_port (the one in redis-cli) is 0, or equal (port + 10000),
we just call `CLUSTER MEET` with 2 arguments, using the old form.
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
Account sharded pubsub channels memory consumption in client memory usage
computation to accurately evict client based on the set threshold for `maxmemory-clients`.
When calling CLIENT INFO/LIST, and in various debug prints, Redis is printing
the number of pubsub channels / patterns the client is subscribed to.
With the addition of sharded pubsub, it would be useful to print the number of
keychannels the client is subscribed to as well.
Since the ranges of `unsigned long long` and `long long` are different, we cannot read an
`unsigned long long` integer from a `RedisModuleString` by `RedisModule_StringToLongLong` .
So I added two new Redis Module APIs to support the conversion between these two types:
* `RedisModule_StringToULongLong`
* `RedisModule_CreateStringFromULongLong`
Signed-off-by: RinChanNOWWW <hzy427@gmail.com>
This commit has two topics.
## Passing config name and value in the same arg
In #10660 (Redis 7.0.1), when we supported the config values that can start with `--` prefix (one of the two topics of that PR),
we broke another pattern: `redis-server redis.config "name value"`, passing both config name
and it's value in the same arg, see #10865
This wasn't a intended change (i.e we didn't realize this pattern used to work).
Although this is a wrong usage, we still like to fix it.
Now we support something like:
```
src/redis-server redis.conf "--maxmemory '700mb'" "--maxmemory-policy volatile-lru" --proc-title-template --my--title--template --loglevel verbose
```
## Changes around --save
Also in this PR, we undo the breaking change we made in #10660 on purpose.
1. `redis-server redis.conf --save --loglevel verbose` (missing `save` argument before anotehr argument).
In 7.0.1, it was throwing an wrong arg error.
Now it will work and reset the save, similar to how it used to be in 7.0.0 and 6.2.x.
3. `redis-server redis.conf --loglevel verbose --save` (missing `save` argument as last argument).
In 6.2, it did not reset the save, which was a bug (inconsistent with the previous bullet).
Now we will make it work and reset the save as well (a bug fix).
The PR fixes 2 issues:
### RM_Call crash on script mode
`RM_Call` can potentially be called from a background thread where `server.current_client`
are not set. In such case we get a crash on `NULL` dereference.
The fix is to check first if `server.current_client` is `NULL`, if it does we should
verify disc errors and readonly replica as we do to any normal clients (no masters nor AOF).
### RM_Call block OOM commands when not needed
Again `RM_Call` can be executed on a background thread using a `ThreadSafeCtx`.
In such case `server.pre_command_oom_state` can be irrelevant and should not be
considered when check OOM state. This cause OOM commands to be blocked when
not necessarily needed.
In such case, check the actual used memory (and not the cached value). Notice that in
order to know if the cached value can be used, we check that the ctx that was used on
the `RM_Call` is a ThreadSafeCtx. Module writer can potentially abuse the API and use
ThreadSafeCtx on the main thread. We consider this as a API miss used.
when we know the size of the zset we're gonna store in advance,
we can check if it's greater than the listpack encoding threshold,
in which case we can create a skiplist from the get go, and avoid
converting the listpack to skiplist later after it was already populated.
If a script made a modification and then was interrupted for taking too long.
there's a chance redis will detect that a replica dropped and would like to reject
write commands with NOREPLICAS due to insufficient good replicas.
returning an error on a command in this case breaks the script atomicity.
The same could in theory happen with READONLY, MISCONF, but i don't think
these state changes can happen during script execution.
I noticed that scripting.tcl uses INFO from within a script and thought it's an
overkill and concluded it's nicer to use another CMD_STALE command,
decided to use ECHO, and then noticed it's not at all allowed in stale mode.
probably overlooked at #6843
The SET and BITFIELD command were added `get_keys_function` in #10148, causing
them to be wrongly marked movablekeys in `populateCommandMovableKeys`.
This was an unintended side effect introduced in #10148 (7.0 RC1)
which could cause some clients an extra round trip for these commands in cluster mode.
Since we define movablekeys as a way to determine if the legacy range [first, last, step]
doesn't find all keys, then we need a completely different approach.
The right approach should be to check if the legacy range covers all key-specs,
and if none of the key-specs have the INCOMPLETE flag.
This way, we don't need to look at getkeys_proc of VARIABLE_FLAG at all.
Probably with the exception of modules, who may still not be using key-specs.
In this PR, we removed `populateCommandMovableKeys` and put its logic in
`populateCommandLegacyRangeSpec`.
In order to properly serve both old and new modules, we must probably keep relying
CMD_MODULE_GETKEYS, but do that only for modules that don't declare key-specs.
For ones that do, we need to take the same approach we take with native redis commands.
This approach was proposed by Oran. Fixes#10833
Co-authored-by: Oran Agra <oran@redislabs.com>
Redis 7 adds some new alias config like `hash-max-listpack-entries` alias `hash-max-ziplist-entries`.
If a config file contains both real name and alias like this:
```
hash-max-listpack-entries 20
hash-max-ziplist-entries 20
```
after set `hash-max-listpack-entries` to 100 and `config rewrite`, the config file becomes to:
```
hash-max-listpack-entries 100
hash-max-ziplist-entries 20
```
we can see that the alias config is not modified, and users will get wrong config after restart.
6.0 and 6.2 doesn't have this bug, since they only have the `slave` word alias.
Co-authored-by: Oran Agra <oran@redislabs.com>
A regression from #10285 (redis 7.0).
CONFIG REWRITE would put lines with: `include`, `rename-command`,
`user`, `loadmodule`, and any module specific config in a comment.
For ACL `user`, `loadmodule` and module specific configs would be
re-inserted at the end (instead of updating existing lines), so the only
implication is a messy config file full of comments.
But for `rename-command` and `include`, the implication would be that
they're now missing, so a server restart would lose them.
Co-authored-by: Oran Agra <oran@redislabs.com>
The important part is that read-only scripts (not just EVAL_RO
and FCALL_RO, but also ones with `no-writes` executed by normal EVAL or
FCALL), will now be permitted to run during CLIENT PAUSE WRITE (unlike
before where only the _RO commands would be processed).
Other than that, some errors like OOM, READONLY, MASTERDOWN are now
handled by processCommand, rather than the command itself affects the
error string (and even error code in some cases), and command stats.
Besides that, now the `may-replicate` commands, PFCOUNT and PUBLISH, will
be considered `write` commands in scripts and will be blocked in all
read-only scripts just like other write commands.
They'll also be blocked in EVAL_RO (i.e. even for scripts without the
`no-writes` shebang flag.
This commit also hides the `may_replicate` flag from the COMMAND command
output. this is a **breaking change**.
background about may_replicate:
We don't want to expose a no-may-replicate flag or alike to scripts, since we
consider the may-replicate thing an internal concern of redis, that we may
some day get rid of.
In fact, the may-replicate flag was initially introduced to flag EVAL: since
we didn't know what it's gonna do ahead of execution, before function-flags
existed). PUBLISH and PFCOUNT, both of which because they have side effects
which may some day be fixed differently.
code changes:
The changes in eval.c are mostly code re-ordering:
- evalCalcFunctionName is extracted out of evalGenericCommand
- evalExtractShebangFlags is extracted luaCreateFunction
- evalGetCommandFlags is new code
* Fix broken protocol when redis can't persist to RDB (general commands, not
modules), excessive newline. regression of #10372 (7.0 RC3)
* Fix broken protocol when Redis can't persist to AOF (modules and
scripts), missing newline.
* Fix bug in OOM check of EVAL scripts called from RM_Call.
set the cached OOM state for scripts before executing module commands too,
so that it can serve scripts that are executed by modules.
i.e. in the past EVAL executed by RM_Call could have either falsely
fail or falsely succeeded because of a wrong cached OOM state flag.
* Fix bugs with RM_Yield:
1. SHUTDOWN should only accept the NOSAVE mode
2. Avoid eviction during yield command processing.
3. Avoid processing master client commands while yielding from another client
* Add new two more checks to RM_Call script mode.
1. READONLY You can't write against a read only replica
2. MASTERDOWN Link with MASTER is down and `replica-serve-stale-data` is set to `no`
* Add new RM_Call flag to let redis automatically refuse `deny-oom` commands
while over the memory limit.
* Add tests to cover various errors from Scripts, Modules, Modules
calling scripts, and Modules calling commands in script mode.
Add tests:
* Looks like the MISCONF error was completely uncovered by the tests,
add tests for it, including from scripts, and modules
* Add tests for NOREPLICAS from scripts
* Add tests for the various errors in module RM_Call, including RM_Call that
calls EVAL, and RM_call in "eval mode". that includes:
NOREPLICAS, READONLY, MASTERDOWN, MISCONF
To easily distinguish between sharded channel message and a global
channel message, introducing `smessage` (instead of `message`) as
message bulk for sharded channel publish message.
This is gonna be a breaking change in 7.0.1!
Background:
Sharded pubsub introduced in redis 7.0, but after the release we quickly
realized that the fact that it's problematic that the client can't distinguish
between normal (global) pubsub messages and sharded ones.
This is important because the same connection can subscribe to both,
but messages sent to one pubsub system are not propagated to the
other (they're completely separate), so if one connection is used to
subscribe to both, we need to assist the client library to know which
message it got so it can forward it to the correct callback.
