The SHUTDOWN command has various flags to change it's default behavior,
but in some cases establishing a connection to redis is complicated and it's easier
for the management software to use signals. however, so far the signals could only
trigger the default shutdown behavior.
Here we introduce the option to control shutdown arguments for SIGTERM and SIGINT.
New config options:
`shutdown-on-sigint [nosave | save] [now] [force]`
`shutdown-on-sigterm [nosave | save] [now] [force]`
Implementation:
Support MULTI_ARG_CONFIG on createEnumConfig to support multiple enums to be applied as bit flags.
Co-authored-by: Oran Agra <oran@redislabs.com>
Add a configuration option to attach an operating system-specific identifier to Redis sockets, supporting advanced network configurations using iptables (Linux) or ipfw (FreeBSD).
By the convention of errors, there is supposed to be a space between the code and the name.
While looking at some lua stuff I noticed that interpreter errors were not adding the space,
so some clients will try to map the detailed error message into the error.
We have tests that hit this condition, but they were just checking that the string "starts" with ERR.
I updated some other tests with similar incorrect string checking. This isn't complete though, as
there are other ways we check for ERR I didn't fix.
Produces some fun output like:
```
# Errorstats
errorstat_ERR:count=1
errorstat_ERRuser_script_1_:count=1
```
Current implementation simple idle client which serves no traffic still
use ~17Kb of memory. this is mainly due to a fixed size reply buffer
currently set to 16kb.
We have encountered some cases in which the server operates in a low memory environments.
In such cases a user who wishes to create large connection pools to support potential burst period,
will exhaust a large amount of memory to maintain connected Idle clients.
Some users may choose to "sacrifice" performance in order to save memory.
This commit introduce a dynamic mechanism to shrink and expend the client reply buffer based on
periodic observed peak.
the algorithm works as follows:
1. each time a client reply buffer has been fully written, the last recorded peak is updated:
new peak = MAX( last peak, current written size)
2. during clients cron we check for each client if the last observed peak was:
a. matching the current buffer size - in which case we expend (resize) the buffer size by 100%
b. less than half the buffer size - in which case we shrink the buffer size by 50%
3. In any case we will **not** resize the buffer in case:
a. the current buffer peak is less then the current buffer usable size and higher than 1/2 the
current buffer usable size
b. the value of (current buffer usable size/2) is less than 1Kib
c. the value of (current buffer usable size*2) is larger than 16Kib
4. the peak value is reset to the current buffer position once every **5** seconds. we maintain a new
field in the client structure (buf_peak_last_reset_time) which is used to keep track of how long it
passed since the last buffer peak reset.
### **Interface changes:**
**CIENT LIST** - now contains 2 new extra fields:
rbs= < the current size in bytes of the client reply buffer >
rbp=< the current value in bytes of the last observed buffer peak position >
**INFO STATS** - now contains 2 new statistics:
reply_buffer_shrinks = < total number of buffer shrinks performed >
reply_buffer_expends = < total number of buffer expends performed >
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Yoav Steinberg <yoav@redislabs.com>
Summary of changes:
1. Rename `redisCommand->name` to `redisCommand->declared_name`, it is a
const char * for native commands and SDS for module commands.
2. Store the [sub]command fullname in `redisCommand->fullname` (sds).
3. List subcommands in `ACL CAT`
4. List subcommands in `COMMAND LIST`
5. `moduleUnregisterCommands` now will also free the module subcommands.
6. RM_GetCurrentCommandName returns full command name
Other changes:
1. Add `addReplyErrorArity` and `addReplyErrorExpireTime`
2. Remove `getFullCommandName` function that now is useless.
3. Some cleanups about `fullname` since now it is SDS.
4. Delete `populateSingleCommand` function from server.h that is useless.
5. Added tests to cover this change.
6. Add some module unload tests and fix the leaks
7. Make error messages uniform, make sure they always contain the full command
name and that it's quoted.
7. Fixes some typos
see the history in #9504, fixes#10124
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: guybe7 <guy.benoish@redislabs.com>
Following #10038.
This PR introduces two changes.
1. Show the elapsed time of a single test in the test output, in order to have a more
detailed understanding of the changes in test run time.
2. Speedup two tests related to `key-load-delay` configuration.
other tests do not seem to be affected by #10003.
Implement Multi-Part AOF mechanism to avoid overheads during AOFRW.
Introducing a folder with multiple AOF files tracked by a manifest file.
The main issues with the the original AOFRW mechanism are:
* buffering of commands that are processed during rewrite (consuming a lot of RAM)
* freezes of the main process when the AOFRW completes to drain the remaining part of the buffer and fsync it.
* double disk IO for the data that arrives during AOFRW (had to be written to both the old and new AOF files)
The main modifications of this PR:
1. Remove the AOF rewrite buffer and related code.
2. Divide the AOF into multiple files, they are classified as two types, one is the the `BASE` type,
it represents the full amount of data (Maybe AOF or RDB format) after each AOFRW, there is only
one `BASE` file at most. The second is `INCR` type, may have more than one. They represent the
incremental commands since the last AOFRW.
3. Use a AOF manifest file to record and manage these AOF files mentioned above.
4. The original configuration of `appendfilename` will be the base part of the new file name, for example:
`appendonly.aof.1.base.rdb` and `appendonly.aof.2.incr.aof`
5. Add manifest-related TCL tests, and modified some existing tests that depend on the `appendfilename`
6. Remove the `aof_rewrite_buffer_length` field in info.
7. Add `aof-disable-auto-gc` configuration. By default we're automatically deleting HISTORY type AOFs.
It also gives users the opportunity to preserve the history AOFs. just for testing use now.
8. Add AOFRW limiting measure. When the AOFRW failures reaches the threshold (3 times now),
we will delay the execution of the next AOFRW by 1 minute. If the next AOFRW also fails, it will be
delayed by 2 minutes. The next is 4, 8, 16, the maximum delay is 60 minutes (1 hour). During the limit
period, we can still use the 'bgrewriteaof' command to execute AOFRW immediately.
9. Support upgrade (load) data from old version redis.
10. Add `appenddirname` configuration, as the directory name of the append only files. All AOF files and
manifest file will be placed in this directory.
11. Only the last AOF file (BASE or INCR) can be truncated. Otherwise redis will exit even if
`aof-load-truncated` is enabled.
Co-authored-by: Oran Agra <oran@redislabs.com>
## background
Till now CONFIG SET was blocked during loading.
(In the not so distant past, GET was disallowed too)
We recently (not released yet) added an async-loading mode, see #9323,
and during that time it'll serve CONFIG SET and any other command.
And now we realized (#9770) that some configs, and commands are dangerous
during async-loading.
## changes
* Allow most CONFIG SET during loading (both on async-loading and normal loading)
* Allow CONFIG REWRITE and CONFIG RESETSTAT during loading
* Block a few config during loading (`appendonly`, `repl-diskless-load`, and `dir`)
* Block a few commands during loading (list below)
## the blocked commands:
* SAVE - obviously we don't wanna start a foregreound save during loading 8-)
* BGSAVE - we don't mind to schedule one, but we don't wanna fork now
* BGREWRITEAOF - we don't mind to schedule one, but we don't wanna fork now
* MODULE - we obviously don't wanna unload a module during replication / rdb loading
(MODULE HELP and MODULE LIST are not blocked)
* SYNC / PSYNC - we're in the middle of RDB loading from master, must not allow sync
requests now.
* REPLICAOF / SLAVEOF - we're in the middle of replicating, maybe it makes sense to let
the user abort it, but he couldn't do that so far, i don't wanna take any risk of bugs due to odd state.
* CLUSTER - only allow [HELP, SLOTS, NODES, INFO, MYID, LINKS, KEYSLOT, COUNTKEYSINSLOT,
GETKEYSINSLOT, RESET, REPLICAS, COUNT_FAILURE_REPORTS], for others, preserve the status quo
## other fixes
* processEventsWhileBlocked had an issue when being nested, this could happen with a busy script
during async loading (new), but also in a busy script during AOF loading (old). this lead to a crash in
the scenario described in #6988
Block sensitive configs and commands by default.
* `enable-protected-configs` - block modification of configs with the new `PROTECTED_CONFIG` flag.
Currently we add this flag to `dbfilename`, and `dir` configs,
all of which are non-mutable configs that can set a file redis will write to.
* `enable-debug-command` - block the `DEBUG` command
* `enable-module-command` - block the `MODULE` command
These have a default value set to `no`, so that these features are not
exposed by default to client connections, and can only be set by modifying the config file.
Users can change each of these to either `yes` (allow all access), or `local` (allow access from
local TCP connections and unix domain connections)
Note that this is a **breaking change** (specifically the part about MODULE command being disabled by default).
I.e. we don't consider DEBUG command being blocked as an issue (people shouldn't have been using it),
and the few configs we protected are unlikely to have been set at runtime anyway.
On the other hand, it's likely to assume some users who use modules, load them from the config file anyway.
Note that's the whole point of this PR, for redis to be more secure by default and reduce the attack surface on
innocent users, so secure defaults will necessarily mean a breaking change.
Support doing `CONFIG GET <x> <y> <z>`, each of them can also be
a pattern with wildcards.
This avoids duplicates in the result by looping over the configs and for
each once checking all the patterns, once a match is found for a pattern
we move on to the next config.
When CONFIG SET fails, print the name of the config that failed.
This is helpful since config set is now variadic.
however, there are cases where several configs have the same apply
function, and we can't be sure which one of them caused the failure.
Added `HIDDEN_CONFIG` to hide debug / dev / testing configs from CONFIG GET
when it is used with a wildcard.
These are not documented in redis.conf so now CONFIG GET only works when they
are explicitly specified.
The current configs are:
```
key-load-delay
loading-process-events-interval-bytes
rdb-key-save-delay
use-exit-on-panic
watchdog-period
```
After the introduction of `Multiparam config set` in #9748,
there are two tests cases failed.
```
[exception]: Executing test client: ERR Config set failed - Failed to set current oom_score_adj. Check server logs..
ERR Config set failed - Failed to set current oom_score_adj. Check server logs.
```
`CONFIG sanity` test failed on the `config set oom-score-adj-values`
which is a "special" config that does not catch no-op changes.
And then it will update `oom-score-adj` which not supported in
MacOs. We solve it by adding `oom-score*` to the `skip_configs` list.
```
*** [err]: CONFIG SET rollback on apply error in tests/unit/introspection.tcl
Expected an error but nothing was caught
```
`CONFIG SET rollback on apply error` test failed on the
`config set port $used_port`. In theory, it should throw the
error `Unable to listen on this port*`. But it failed on MacOs.
We solve it by adding `-myaddr 127.0.0.1` to the socket call.
We can now do: `config set maxmemory 10m repl-backlog-size 5m`
## Basic algorithm to support "transaction like" config sets:
1. Backup all relevant current values (via get).
2. Run "verify" and "set" on everything, if we fail run "restore".
3. Run "apply" on everything (optional optimization: skip functions already run). If we fail run "restore".
4. Return success.
### restore
1. Run set on everything in backup. If we fail log it and continue (this puts us in an undefined
state but we decided it's better than the alternative of panicking). This indicates either a bug
or some unsupported external state.
2. Run apply on everything in backup (optimization: skip functions already run). If we fail log
it (see comment above).
3. Return error.
## Implementation/design changes:
* Apply function are idempotent (have no effect if they are run more than once for the same config).
* No indication in set functions if we're reading the config or running from the `CONFIG SET` command
(removed `update` argument).
* Set function should set some config variable and assume an (optional) apply function will use that
later to apply. If we know this setting can be safely applied immediately and can always be reverted
and doesn't depend on any other configuration we can apply immediately from within the set function
(and not store the setting anywhere). This is the case of this `dir` config, for example, which has no
apply function. No apply function is need also in the case that setting the variable in the `server` struct
is all that needs to be done to make the configuration take effect. Note that the original concept of `update_fn`,
which received the old and new values was removed and replaced by the optional apply function.
* Apply functions use settings written to the `server` struct and don't receive any inputs.
* I take care that for the generic (non-special) configs if there's no change I avoid calling the setter (possible
optimization: avoid calling the apply function as well).
* Passing the same config parameter more than once to `config set` will fail. You can't do `config set my-setting
value1 my-setting value2`.
Note that getting `save` in the context of the conf file parsing to work here as before was a pain.
The conf file supports an aggregate `save` definition, where each `save` line is added to the server's
save params. This is unlike any other line in the config file where each line overwrites any previous
configuration. Since we now support passing multiple save params in a single line (see top comments
about `save` in https://github.com/redis/redis/pull/9644) we should deprecate the aggregate nature of
this config line and perhaps reduce this ugly code in the future.
* Fix CLIENT KILL kill all clients with id 0 or with skipme
CLIENT KILL with ID argument should only kill the client with the provided ID. In old code,
CLIENT KILL with id 0 will kill all the connected clients.
Co-authored-by: Ofir Luzon <ofirluzon@gmail.com>
Two issues:
1. In many tests we simply forgot to close the connections we created, which doesn't matter for normal tests where the server is killed, but creates a leak on external server tests.
2. When calling `start_server` on external test we create a fresh connection instead of really starting a new server, but never clean it at the end.
This PR adds a spell checker CI action that will fail future PRs if they introduce typos and spelling mistakes.
This spell checker is based on blacklist of common spelling mistakes, so it will not catch everything,
but at least it is also unlikely to cause false positives.
Besides that, the PR also fixes many spelling mistakes and types, not all are a result of the spell checker we use.
Here's a summary of other changes:
1. Scanned the entire source code and fixes all sorts of typos and spelling mistakes (including missing or extra spaces).
2. Outdated function / variable / argument names in comments
3. Fix outdated keyspace masks error log when we check `config.notify-keyspace-events` in loadServerConfigFromString.
4. Trim the white space at the end of line in `module.c`. Check: https://github.com/redis/redis/pull/7751
5. Some outdated https link URLs.
6. Fix some outdated comment. Such as:
- In README: about the rdb, we used to said create a `thread`, change to `process`
- dbRandomKey function coment (about the dictGetRandomKey, change to dictGetFairRandomKey)
- notifyKeyspaceEvent fucntion comment (add type arg)
- Some others minor fix in comment (Most of them are incorrectly quoted by variable names)
7. Modified the error log so that users can easily distinguish between TCP and TLS in `changeBindAddr`
This commit revives the improves the ability to run the test suite against
external servers, instead of launching and managing `redis-server` processes as
part of the test fixture.
This capability existed in the past, using the `--host` and `--port` options.
However, it was quite limited and mostly useful when running a specific tests.
Attempting to run larger chunks of the test suite experienced many issues:
* Many tests depend on being able to start and control `redis-server` themselves,
and there's no clear distinction between external server compatible and other
tests.
* Cluster mode is not supported (resulting with `CROSSSLOT` errors).
This PR cleans up many things and makes it possible to run the entire test suite
against an external server. It also provides more fine grained controls to
handle cases where the external server supports a subset of the Redis commands,
limited number of databases, cluster mode, etc.
The tests directory now contains a `README.md` file that describes how this
works.
This commit also includes additional cleanups and fixes:
* Tests can now be tagged.
* Tag-based selection is now unified across `start_server`, `tags` and `test`.
* More information is provided about skipped or ignored tests.
* Repeated patterns in tests have been extracted to common procedures, both at a
global level and on a per-test file basis.
* Cleaned up some cases where test setup was based on a previous test executing
(a major anti-pattern that repeats itself in many places).
* Cleaned up some cases where test teardown was not part of a test (in the
future we should have dedicated teardown code that executes even when tests
fail).
* Fixed some tests that were flaky running on external servers.
the bug was also discussed in #8716, and was solved in #8719, but incompletely:
when the server is started, and the save option is default, if you issue the " config set save "" "
to change the save option, and then issue the “config rewrite” command, the " save "" " won't be saved.
Add ability to modify port, tls-port and bind configurations by CONFIG SET command.
To simplify the code and make it cleaner, a new structure
added, socketFds, which contains the file descriptors array and its counter,
and used for TCP, TLS and Cluster sockets file descriptors.
if option `set-proc-title' is no, then do nothing for proc title.
The reason has been explained long ago, see following:
We update redis to 2.8.8, then found there are some side effect when
redis always change the process title.
We run several slave instance on one computer, and all these salves
listen on unix socket only, then ps will show:
1 S redis 18036 1 0 80 0 - 56130 ep_pol 14:02 ? 00:00:31 /usr/sbin/redis-server *:0
1 S redis 23949 1 0 80 0 - 11074 ep_pol 15:41 ? 00:00:00 /usr/sbin/redis-server *:0
for redis 2.6 the output of ps is like following:
1 S redis 18036 1 0 80 0 - 56130 ep_pol 14:02 ? 00:00:31 /usr/sbin/redis-server /etc/redis/a.conf
1 S redis 23949 1 0 80 0 - 11074 ep_pol 15:41 ? 00:00:00 /usr/sbin/redis-server /etc/redis/b.conf
Later is more informational in our case. The situation
is worse when we manage the config and process running
state by salt. Salt check the process by running "ps |
grep SIG" (for Gentoo System) to check the running
state, where SIG is the string to search for when
looking for the service process with ps. Previously, we
define sig as "/usr/sbin/redis-server
/etc/redis/a.conf". Since the ps output is identical for
our case, so we have no way to check the state of
specified redis instance.
So, for our case, we prefer the old behavior, i.e, do
not change the process title for the main redis process.
Or add an option such as "set-proc-title [yes|no]" to
control this behavior.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
This adds a new `tls-client-cert-file` and `tls-client-key-file`
configuration directives which make it possible to use different
certificates for the TLS-server and TLS-client functions of Redis.
This is an optional directive. If it is not specified the `tls-cert-file`
and `tls-key-file` directives are used for TLS client functions as well.
Also, `utils/gen-test-certs.sh` now creates additional server-only and client-only certs and will skip intensive operations if target files already exist.
* Add CLIENT INFO subcommand.
The output is identical to CLIENT LIST but provides a single line for
the current client only.
* Add CLIENT LIST ID [id...].
Co-authored-by: Itamar Haber <itamar@redislabs.com>
The test creates keys with various encodings, DUMP them, corrupt the payload
and RESTORES it.
It utilizes the recently added use-exit-on-panic config to distinguish between
asserts and segfaults.
If the restore succeeds, it runs random commands on the key to attempt to
trigger a crash.
It runs in two modes, one with deep sanitation enabled and one without.
In the first one we don't expect any assertions or segfaults, in the second one
we expect assertions, but no segfaults.
We also check for leaks and invalid reads using valgrind, and if we find them
we print the commands that lead to that issue.
Changes in the code (other than the test):
- Replace a few NPD (null pointer deference) flows and division by zero with an
assertion, so that it doesn't fail the test. (since we set the server to use
`exit` rather than `abort` on assertion).
- Fix quite a lot of flows in rdb.c that could have lead to memory leaks in
RESTORE command (since it now responds with an error rather than panic)
- Add a DEBUG flag for SET-SKIP-CHECKSUM-VALIDATION so that the test don't need
to bother with faking a valid checksum
- Remove a pile of code in serverLogObjectDebugInfo which is actually unsafe to
run in the crash report (see comments in the code)
- fix a missing boundary check in lzf_decompress
test suite infra improvements:
- be able to run valgrind checks before the process terminates
- rotate log files when restarting servers
track and report memory used by clients argv.
this is very usaful in case clients started sending a command and didn't
complete it. in which case the first args of the command are already
trimmed from the query buffer.
in an effort to avoid cache misses and overheads while keeping track of
these, i avoid calling sdsZmallocSize and instead use the sdslen /
bulk-len which can at least give some insight into the problem.
This memory is now added to the total clients memory usage, as well as
the client list.
This is a catch-all test to confirm that that rewrite produces a valid
output for all parameters and that this process does not introduce
undesired configuration changes.
Save parameters should either be default or whatever specified in the
config file. This fixes an issue introduced in #7092 which causes
configuration file settings to be applied on top of the defaults.
Currently, there are several types of threads/child processes of a
redis server. Sometimes we need deeply optimise the performance of
redis, so we would like to isolate threads/processes.
There were some discussion about cpu affinity cases in the issue:
https://github.com/antirez/redis/issues/2863
So implement cpu affinity setting by redis.conf in this patch, then
we can config server_cpulist/bio_cpulist/aof_rewrite_cpulist/
bgsave_cpulist by cpu list.
Examples of cpulist in redis.conf:
server_cpulist 0-7:2 means cpu affinity 0,2,4,6
bio_cpulist 1,3 means cpu affinity 1,3
aof_rewrite_cpulist 8-11 means cpu affinity 8,9,10,11
bgsave_cpulist 1,10-11 means cpu affinity 1,10,11
Test on linux/freebsd, both work fine.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
- make lua-replicate-commands mutable (it never was, but i don't see why)
- make tcp-backlog immutable (fix a recent refactory mistake)
- increase the max limit of a few configs to match what they were before
the recent refactory
Changes in behavior:
- Change server.stream_node_max_entries from int64_t to long long, so that it can be used by the generic infra
- standard error reply instead of "repl-backlog-size must be 1 or greater" and such
- tls-port and a few TLS booleans were readable (config get) even when USE_OPENSSL was off (now they aren't)
- syslog-enabled, syslog-ident, cluster-enabled, appendfilename, and supervised didn't have a get (now they do)
- pidfile was initialized to NULL in InitServerConfig but had CONFIG_DEFAULT_PID_FILE in rewriteConfig (so the real default was "", but rewrite would cause it to be set), fixed the rewrite.
- TLS config in server.h was uninitialized (if no tls config args were provided)
Adding test for sanity and coverage
