This commit fixes a well known and an annoying issue in Sentinel mode.
Cause of this issue:
Currently, Redis rewrite process works well in server mode, however in sentinel mode,
the sentinel config has variant semantics for different configurations, in example configuration
https://github.com/redis/redis/blob/unstable/sentinel.conf, we put comments on these.
However the rewrite process only treat the sentinel config as a single option. During rewrite
process, it will mess up with the lines and comments.
Approaches:
In order to solve this issue, we need to differentiate different subconfig options in sentinel separately,
for example, sentinel monitor <master-name> <ip> <redis-port> <quorum>
we can treat it as sentinel monitor option, instead of the sentinel option.
This commit also fixes the dependency issue when putting configurations in sentinel.conf.
For example before this commit,we must put
`sentinel monitor <master-name> <ip> <redis-port> <quorum>` before
`sentinel auth-pass <master-name> <password>` for a single master,
otherwise the server cannot start and will return error. This commit fixes this issue, as long as
the monitoring master was configured, no matter the sequence is, the sentinel can start and run properly.
Fixes a regression introduced due to a new (safer) way of rewriting configuration files. In the past the file was simply overwritten (same inode), but now Redis creates a new temporary file and later renames it over the old one.
The temp file typically gets created with 0600 permissions so we later fchmod it to fix that. Unlike open with O_CREAT, fchmod doesn't consider umask so we have to do that explicitly.
Fixes#8369
The output for COMMAND command was wrong for some commands.
clients can use firstkey,lastkey,step to find (some) key name arguments, and the
"movablekeys" flag to know that they can't know all (or any) of the key name arguments.
These commands had the wrong output:
1. GEORADIUS*_RO used to have "movablekeys" (which it doesn't really need)
2. XREAD and XREADGROUP used to have (1,1,1). but that's completely wrong.
3. Z*STORE used to have (0,0,0) but it can at lest give the index of the dstkey (1,1,1)
Sentinel uses execve to run scripts, so it needs to use FD_CLOEXEC
on all file descriptors, so that they're not accessible by the script it runs.
This commit includes a change to the sentinel tests, which verifies no
FDs are left opened when the script is executed.
This fixes three issues:
1. Using debug SLEEP was impacting the subsequent test, and causing it to pass reliably even though it should have failed. There was exactly 5 seconds of artificial pause (after 1000, wait 3000, wait 1000) between the debug sleep 5 and when we needed to unblock the client in the subsequent test. Now the test properly makes sure the client is unblocked, and the subsequent test is fixed.
2. Minor, the client pause types were using & comparisons instead of ==, since it was previously a flag.
3. Test is faster now that some of the hand wavy time is removed.
Older arm64 Linux kernels have a bug that could lead to data corruption during
background save under the following scenario:
1) jemalloc uses MADV_FREE on a page,
2) jemalloc reuses and writes the page,
3) Redis forks the background save process, and
4) Linux performs page reclamation.
Under these conditions, Linux will reclaim the page wrongfully and the
background save process will read zeros when it tries to read the page.
The bug has been fixed in Linux with commit:
ff1712f953e27f0b0718762ec17d0adb15c9fd0b ("arm64: pgtable: Ensure dirty bit is
preserved across pte_wrprotect()")
This Commit adds an ignore-warnings config, when not found, redis will
print a warning and exit on startup (default behavior).
Co-authored-by: Oran Agra <oran@redislabs.com>
Add INFO field, rdb_active_cow_size, to report COW of a live fork child while
it's active.
- once in 1024 keys check the time, and if there's more than one second since
the last report send a report to the parent via the pipe.
- refactor the child_info_data struct, it's an implementation detail that
shouldn't be in the server struct, and not used to communicate data between
caller and callee
- remove the magic value from that struct (not sure what it was good for), and
instead add handling of short reads.
- add another value to the structure, cow_type, to indicate if the report is
for the new rdb_active_cow_size field, or it's the last report of a
successful operation
- add new Module API to report the active COW
- add more asserts variants to test.tcl
This is a refactory commit, isn't suppose to have any actual impact.
it does the following:
- keep just one server struct fork child pid variable instead of 3
- have one server struct variable indicating the purpose of the current fork
child.
- redisFork is now responsible of updating the server struct with the pid,
which means it can be the one that calls updateDictResizePolicy
- move child info pipe handling into redisFork instead of having them
repeated outside
- there are two classes of fork purposes, mutually exclusive group (AOF, RDB,
Module), and one that can create several forks to coexist in parallel (LDB,
but maybe Modules some day too, Module API allows for that).
- minor fix to killRDBChild:
unlike killAppendOnlyChild and TerminateModuleForkChild, the killRDBChild
doesn't clear the pid variable or call wait4, so checkChildrenDone does
the cleanup for it.
This commit removes the explicit calls to rdbRemoveTempFile, closeChildInfoPipe,
updateDictResizePolicy, which didn't do any harm, but where unnecessary.
Add ZRANGESTORE command, and improve ZSTORE command to deprecated Z[REV]RANGE[BYSCORE|BYLEX].
Syntax for the new ZRANGESTORE command:
ZRANGESTORE [BYSCORE | BYLEX] [REV] [LIMIT offset count]
New syntax for ZRANGE:
ZRANGE [BYSCORE | BYLEX] [REV] [WITHSCORES] [LIMIT offset count]
Old syntax for ZRANGE:
ZRANGE [WITHSCORES]
Other ZRANGE commands remain unchanged.
The implementation uses common code for all of these, by utilizing a consumer interface that in one
command response to the client, and in the other command stores a zset key.
Co-authored-by: Oran Agra <oran@redislabs.com>
New command: XAUTOCLAIM <key> <group> <consumer> <min-idle-time> <start> [COUNT <count>] [JUSTID]
The purpose is to claim entries from a stale consumer without the usual
XPENDING+XCLAIM combo which takes two round trips.
The syntax for XAUTOCLAIM is similar to scan: A cursor is returned (streamID)
by each call and should be used as start for the next call. 0-0 means the scan is complete.
This PR extends the deferred reply mechanism for any bulk string (not just counts)
This PR carries some unrelated test code changes:
- Renames the term "client" into "consumer" in the stream-cgroups test
- And also changes DEBUG SLEEP into "after"
Co-authored-by: Oran Agra <oran@redislabs.com>
* man-like consistent long formatting
* Uppercases commands, subcommands and options
* Adds 'HELP' to HELP for all
* Lexicographical order
* Uses value notation and other .md likeness
* Moves const char *help to top
* Keeps it under 80 chars
* Misc help typos, consistent conjuctioning (i.e return and not returns)
* Uses addReplySubcommandSyntaxError(c) all over
Signed-off-by: Itamar Haber <itamar@redislabs.com>
If AOF file contains a long Lua script that timed out, then the `evalCommand` calls
`blockingOperationEnds` which sets `server.blocked_last_cron` to 0. later on,
the AOF `whileBlockedCron` function asserts that this value is not 0.
The fix allows nesting call to `blockingOperationStarts` and `blockingOperationEnds`.
The issue was first introduce in this commit: 9ef8d2f67 (Redis 6.2 RC1)
In #7726 (part of 6.2), we added a mechanism for whileBlockedCron, this
mechanism has an assertion to make sure the timestamp in
whileBlockedCron was always set correctly before the blocking operation
starts.
I now found (thanks to our CI) two bugs in that area:
1) CONFIG RESETSTAT (if it was allowed during loading) would have
cleared this var
2) the call stopLoading (which calls whileBlockedCron) was made too
early, while the rio is still in use, in which case the update_cksum
(rdbLoadProgressCallback) may still be called and whileBlockedCron
can assert.
This Commit pushes forward the observability on overall error statistics and command statistics within redis-server:
It extends INFO COMMANDSTATS to have
- failed_calls in - so we can keep track of errors that happen from the command itself, broken by command.
- rejected_calls - so we can keep track of errors that were triggered outside the commmand processing per se
Adds a new section to INFO, named ERRORSTATS that enables keeping track of the different errors that
occur within redis ( within processCommand and call ) based on the reply Error Prefix ( The first word
after the "-", up to the first space ).
This commit also fixes RM_ReplyWithError so that it can be correctly identified as an error reply.
Recently efaf09ee4 started using addReplyErrorSds in place of
addReplySds the later takes ownership of the string but the former did
not.
This introduced memory leaks when a script returns an error to redis,
and also in clusterRedirectClient (two new usages of
addReplyErrorSds which was mostly unused till now.
This commit chagnes two thanks.
1. change addReplyErrorSds to take ownership of the error string.
2. scripting.c doesn't actually need to use addReplyErrorSds, it's a
perfect match for addReplyErrorFormat (replaces newlines with spaces)
Adds: `L/RPOP <key> [count]`
Implements no. 2 of the following strategies:
1. Loop on listTypePop - this would result in multiple calls for memory freeing and allocating (see 769167a079)
2. Iterate the range to build the reply, then call quickListDelRange - this requires two iterations and **is the current choice**
3. Refactor quicklist to have a pop variant of quickListDelRange - probably optimal but more complex
Also:
* There's a historical check for NULL after calling listTypePop that was converted to an assert.
* This refactors common logic shared between LRANGE and the new form of LPOP/RPOP into addListRangeReply (adds test for b/w compat)
* Consequently, it may have made sense to have `LRANGE l -1 -2` and `LRANGE l 9 0` be legit and return a reverse reply. Due to historical reasons that would be, however, a breaking change.
* Added minimal comments to existing commands to adhere to the style, make core dev life easier and get commit karma, naturally.
When a database on a 64 bit build grows past 2^31 keys, the underlying hash table expands to 2^32 buckets. After this point, the algorithms for selecting random elements only return elements from half of the available buckets because they use random() which has a range of 0 to 2^31 - 1. This causes problems for eviction policies which use dictGetSomeKeys or dictGetRandomKey. Over time they cause the hash table to become unbalanced because, while new keys are spread out evenly across all buckets, evictions come from only half of the available buckets. Eventually this half of the table starts to run out of keys and it takes longer and longer to find candidates for eviction. This continues until no more evictions can happen.
This solution addresses this by using a 64 bit PRNG instead of libc random().
Co-authored-by: Greg Femec <gfemec@google.com>
Turns out that when the fork child crashes, the crash log was deleting
the pidfile from the disk (although the parent is still running.
Now we set the pidfile of the fork process to NULL so the fork process
will never deletes it.
In the distant history there was only the read flag for commands, and whatever
command that didn't have the read flag was a write one.
Then we added the write flag, but some portions of the code still used !read
Also some commands that don't work on the keyspace at all, still have the read
flag.
Changes in this commit:
1. remove the read-only flag from TIME, ECHO, ROLE and LASTSAVE
2. EXEC command used to decides if it should propagate a MULTI by looking at
the command flags (!read & !admin).
When i was about to change it to look at the write flag instead, i realized
that this would cause it not to propagate a MULTI for PUBLISH, EVAL, and
SCRIPT, all 3 are not marked as either a read command or a write one (as
they should), but all 3 are calling forceCommandPropagation.
So instead of introducing a new flag to denote a command that "writes" but
not into the keyspace, and still needs propagation, i decided to rely on
the forceCommandPropagation, and just fix the code to propagate MULTI when
needed rather than depending on the command flags at all.
The implication of my change then is that now it won't decide to propagate
MULTI when it sees one of these: SELECT, PING, INFO, COMMAND, TIME and
other commands which are neither read nor write.
3. Changing getNodeByQuery and clusterRedirectBlockedClientIfNeeded in
cluster.c to look at !write rather than read flag.
This should have no implications, since these code paths are only reachable
for commands which access keys, and these are always marked as either read
or write.
This commit improve MULTI propagation tests, for modules and a bunch of
other special cases, all of which used to pass already before that commit.
the only one that test change that uncovered a change of behavior is the
one that DELs a non-existing key, it used to propagate an empty
multi-exec block, and no longer does.
Exposes the main thread CPU info via info modules ( linux specific only )
(used_cpu_sys_main_thread and used_cpu_user_main_thread). This is important for:
- distinguish between main thread and io-threads cpu time total cpu time consumed ( check
what is the first bottleneck on the used config )
- distinguish between main thread and modules threads total cpu time consumed
Apart from it, this commit also exposes the server_time_usec within the Server section so that we can
properly differentiate consecutive collection and calculate for example the CPU% and or / cpu time vs
wall time, etc...
Add commands to query geospatial data with bounding box.
Two new commands that replace the existing 4 GEORADIUS* commands.
GEOSEARCH key [FROMMEMBER member] [FROMLOC long lat] [BYRADIUS radius
unit] [BYBOX width height unit] [WITHCORD] [WITHDIST] [WITHASH] [COUNT
count] [ASC|DESC]
GEOSEARCHSTORE dest_key src_key [FROMMEMBER member] [FROMLOC long lat]
[BYRADIUS radius unit] [BYBOX width height unit] [WITHCORD] [WITHDIST]
[WITHASH] [COUNT count] [ASC|DESC] [STOREDIST]
- Add two types of CIRCULAR_TYPE and RECTANGLE_TYPE to achieve different searches
- Judge whether the point is within the rectangle, refer to:
geohashGetDistanceIfInRectangle
The test creates keys with various encodings, DUMP them, corrupt the payload
and RESTORES it.
It utilizes the recently added use-exit-on-panic config to distinguish between
asserts and segfaults.
If the restore succeeds, it runs random commands on the key to attempt to
trigger a crash.
It runs in two modes, one with deep sanitation enabled and one without.
In the first one we don't expect any assertions or segfaults, in the second one
we expect assertions, but no segfaults.
We also check for leaks and invalid reads using valgrind, and if we find them
we print the commands that lead to that issue.
Changes in the code (other than the test):
- Replace a few NPD (null pointer deference) flows and division by zero with an
assertion, so that it doesn't fail the test. (since we set the server to use
`exit` rather than `abort` on assertion).
- Fix quite a lot of flows in rdb.c that could have lead to memory leaks in
RESTORE command (since it now responds with an error rather than panic)
- Add a DEBUG flag for SET-SKIP-CHECKSUM-VALIDATION so that the test don't need
to bother with faking a valid checksum
- Remove a pile of code in serverLogObjectDebugInfo which is actually unsafe to
run in the crash report (see comments in the code)
- fix a missing boundary check in lzf_decompress
test suite infra improvements:
- be able to run valgrind checks before the process terminates
- rotate log files when restarting servers
When loading an encoded payload we will at least do a shallow validation to
check that the size that's encoded in the payload matches the size of the
allocation.
This let's us later use this encoded size to make sure the various offsets
inside encoded payload don't reach outside the allocation, if they do, we'll
assert/panic, but at least we won't segfault or smear memory.
We can also do 'deep' validation which runs on all the records of the encoded
payload and validates that they don't contain invalid offsets. This lets us
detect corruptions early and reject a RESTORE command rather than accepting
it and asserting (crashing) later when accessing that payload via some command.
configuration:
- adding ACL flag skip-sanitize-payload
- adding config sanitize-dump-payload [yes/no/clients]
For now, we don't have a good way to ensure MIGRATE in cluster resharding isn't
being slowed down by these sanitation, so i'm setting the default value to `no`,
but later on it should be set to `clients` by default.
changes:
- changing rdbReportError not to `exit` in RESTORE command
- adding a new stat to be able to later check if cluster MIGRATE isn't being
slowed down by sanitation.
One way this was happening is when a module issued an RM_Call which would inject MULTI.
If the module command that does that was itself issued by something else that already did
added MULTI (e.g. another module, or a Lua script), it would have caused nested MULTI.
In fact the MULTI state in the client or the MULTI_EMITTED flag in the context isn't
the right indication that we need to propagate MULTI or not, because on a nested calls
(possibly a module action called by a keyspace event of another module action), these
flags aren't retained / reflected.
instead there's now a global propagate_in_transaction flag for that.
in addition to that, we now have a global in_eval and in_exec flags, to serve the flags
of RM_GetContextFlags, since their dependence on the current client is wrong for the same
reasons mentioned above.
As we know, redis may reject user's requests or evict some keys if
used memory is over maxmemory. Dictionaries expanding may make
things worse, some big dictionaries, such as main db and expires dict,
may eat huge memory at once for allocating a new big hash table and be
far more than maxmemory after expanding.
There are related issues: #4213#4583
More details, when expand dict in redis, we will allocate a new big
ht[1] that generally is double of ht[0], The size of ht[1] will be
very big if ht[0] already is big. For db dict, if we have more than
64 million keys, we need to cost 1GB for ht[1] when dict expands.
If the sum of used memory and new hash table of dict needed exceeds
maxmemory, we shouldn't allow the dict to expand. Because, if we
enable keys eviction, we still couldn't add much more keys after
eviction and rehashing, what's worse, redis will keep less keys when
redis only remains a little memory for storing new hash table instead
of users' data. Moreover users can't write data in redis if disable
keys eviction.
What this commit changed ?
Add a new member function expandAllowed for dict type, it provide a way
for caller to allow expand or not. We expose two parameters for this
function: more memory needed for expanding and dict current load factor,
users can implement a function to make a decision by them.
For main db dict and expires dict type, these dictionaries may be very
big and cost huge memory for expanding, so we implement a judgement
function: we can stop dict to expand provisionally if used memory will
be over maxmemory after dict expands, but to guarantee the performance
of redis, we still allow dict to expand if dict load factor exceeds the
safe load factor.
Add test cases to verify we don't allow main db to expand when left
memory is not enough, so that avoid keys eviction.
Other changes:
For new hash table size when expand. Before this commit, the size is
that double used of dict and later _dictNextPower. Actually we aim to
control a dict load factor between 0.5 and 1.0. Now we replace *2 with
+1, since the first check is that used >= size, the outcome of before
will usually be the same as _dictNextPower(used+1). The only case where
it'll differ is when dict_can_resize is false during fork, so that later
the _dictNextPower(used*2) will cause the dict to jump to *4 (i.e.
_dictNextPower(1025*2) will return 4096).
Fix rehash test cases due to changing algorithm of new hash table size
when expand.
Fixes#7923.
This PR appropriates the special `&` symbol (because `@` and `*` are taken),
followed by a literal value or pattern for describing the Pub/Sub patterns that
an ACL user can interact with. It is similar to the existing key patterns
mechanism in function (additive) and implementation (copy-pasta). It also adds
the allchannels and resetchannels ACL keywords, naturally.
The default user is given allchannels permissions, whereas new users get
whatever is defined by the acl-pubsub-default configuration directive. For
backward compatibility in 6.2, the default of this directive is allchannels but
this is likely to be changed to resetchannels in the next major version for
stronger default security settings.
Unless allchannels is set for the user, channel access permissions are checked
as follows :
* Calls to both PUBLISH and SUBSCRIBE will fail unless a pattern matching the
argumentative channel name(s) exists for the user.
* Calls to PSUBSCRIBE will fail unless the pattern(s) provided as an argument
literally exist(s) in the user's list.
Such failures are logged to the ACL log.
Runtime changes to channel permissions for a user with existing subscribing
clients cause said clients to disconnect unless the new permissions permit the
connections to continue. Note, however, that PSUBSCRIBErs' patterns are matched
literally, so given the change bar:* -> b*, pattern subscribers to bar:* will be
disconnected.
Notes/questions:
* UNSUBSCRIBE, PUNSUBSCRIBE and PUBSUB remain unprotected due to lack of reasons
for touching them.
this metric already includes the argv bytes, like what clientsCronTrackClientsMemUsage does, but it's missing the array itself.
p.s. For the purpose of tracking expensive clients we don't need to include the size of the client struct and the static reply buffer in it.
This is hopefully usually harmles.
The server.ready_keys will usually be empty so the code after releasing
the GIL will soon be done.
The only case where it'll actually process things is when a module
releases a client (or module) blocked on a key, by triggering this NOT
from within a command (e.g. a timer event).
This bug was introduced in redis 6.0.9, see #7903
Fix: When oom-score-adj-values is provided in the config file after
oom-score-adj yes, it'll take an immediate action, before
readOOMScoreAdj was acquired, resulting in an error (out of range score
due to uninitialized value. delay the reaction the real call is made by
main().
Since the values are clamped to -1000..1000, and they're
applied as an offset from the value at startup (which may be -1000), we
need to allow the offsets to reach to +2000 so that a value of +1000 is
achievable in case the value at startup was -1000.
Adding an option for absolute values rather than relative ones.
Blocking command should not be used with MULTI, LUA, and RM_Call. This is because,
the caller, who executes the command in this context, expects a reply.
Today, LUA and MULTI have a special (and different) treatment to blocking commands:
LUA - Most commands are marked with no-script flag which are checked when executing
and command from LUA, commands that are not marked (like XREAD) verify that their
blocking mode is not used inside LUA (by checking the CLIENT_LUA client flag).
MULTI - Command that is going to block, first verify that the client is not inside
multi (by checking the CLIENT_MULTI client flag). If the client is inside multi, they
return a result which is a match to the empty key with no timeout (for example blpop
inside MULTI will act as lpop)
For modules that perform RM_Call with blocking command, the returned results type is
REDISMODULE_REPLY_UNKNOWN and the caller can not really know what happened.
Disadvantages of the current state are:
No unified approach, LUA, MULTI, and RM_Call, each has a different treatment
Module can not safely execute blocking command (and get reply or error).
Though It is true that modules are not like LUA or MULTI and should be smarter not
to execute blocking commands on RM_Call, sometimes you want to execute a command base
on client input (for example if you create a module that provides a new scripting
language like javascript or python).
While modules (on modules command) can check for REDISMODULE_CTX_FLAGS_LUA or
REDISMODULE_CTX_FLAGS_MULTI to know not to block the client, there is no way to
check if the command came from another module using RM_Call. So there is no way
for a module to know not to block another module RM_Call execution.
This commit adds a way to unify the treatment for blocking clients by introducing
a new CLIENT_DENY_BLOCKING client flag. On LUA, MULTI, and RM_Call the new flag
turned on to signify that the client should not be blocked. A blocking command
verifies that the flag is turned off before blocking. If a blocking command sees
that the CLIENT_DENY_BLOCKING flag is on, it's not blocking and return results
which are matches to empty key with no timeout (as MULTI does today).
The new flag is checked on the following commands:
List blocking commands: BLPOP, BRPOP, BRPOPLPUSH, BLMOVE,
Zset blocking commands: BZPOPMIN, BZPOPMAX
Stream blocking commands: XREAD, XREADGROUP
SUBSCRIBE, PSUBSCRIBE, MONITOR
In addition, the new flag is turned on inside the AOF client, we do not want to
block the AOF client to prevent deadlocks and commands ordering issues (and there
is also an existing assert in the code that verifies it).
To keep backward compatibility on LUA, all the no-script flags on existing commands
were kept untouched. In addition, a LUA special treatment on XREAD and XREADGROUP was kept.
To keep backward compatibility on MULTI (which today allows SUBSCRIBE, and PSUBSCRIBE).
We added a special treatment on those commands to allow executing them on MULTI.
The only backward compatibility issue that this PR introduces is that now MONITOR
is not allowed inside MULTI.
Tests were added to verify blocking commands are not blocking the client on LUA, MULTI,
or RM_Call. Tests were added to verify the module can check for CLIENT_DENY_BLOCKING flag.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Itamar Haber <itamar@redislabs.com>
* Configuration file default should now be "auto".
* Expose "process_supervised" as an info field.
* Log messages improvements (clarify required systemd config, report
auto-detected supervision mode, etc.)
* Set server.supervised properly, so it can take precedence of
"daemonize" configuration.
* Produce clear warning if systemd is detected/requested but executable
is compiled without support for it, instead of silently ignoring.
* Handle systemd notification error on startup, and turn off supervised
mode if it failed.
Syntax:
COPY <key> <new-key> [DB <dest-db>] [REPLACE]
No support for module keys yet.
Co-authored-by: tmgauss
Co-authored-by: Itamar Haber <itamar@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Add two optional callbacks to the RedisModuleTypeMethods structure, which is `free_effort`
and `unlink`. the `free_effort` callback indicates the effort required to free a module memory.
Currently, if the effort exceeds LAZYFREE_THRESHOLD, the module memory may be released
asynchronously. the `unlink` callback indicates the key has been removed from the DB by redis, and
may soon be freed by a background thread.
Add `lazyfreed_objects` info field, which represents the number of objects that have been
lazyfreed since redis was started.
Add `RM_GetTypeMethodVersion` API, which return the current redis-server runtime value of
`REDISMODULE_TYPE_METHOD_VERSION`. You can use that when calling `RM_CreateDataType` to know
which fields of RedisModuleTypeMethods are gonna be supported and which will be ignored.
- Add ZDIFF and ZDIFFSTORE which work similarly to SDIFF and SDIFFSTORE
- Make sure the new WITHSCORES argument that was added for ZUNION isn't considered valid for ZUNIONSTORE
Co-authored-by: Oran Agra <oran@redislabs.com>
Expose new `loading_rdb_used_mem` showing the used memory of the server
that saved the RDB file we're currently using.
This is useful in diskless replication when the total size of the rdb is
unkown, and can be used as a rought estimation of progres.
Use that new field to calculate the "user friendly"
`loading_loaded_perc` and `loading_eta_seconds`.
Expose `master_sync_total_bytes` and `master_sync_total_bytes` to complement
on the existing `master_sync_total_bytes` (which cannot be used on its own
to calculate progress).
Add "user friendly" field for `master_sync_perc`
Perform full reset of all client connection states, is if the client was
disconnected and re-connected. This affects:
* MULTI state
* Watched keys
* MONITOR mode
* Pub/Sub subscription
* ACL/Authenticated state
* Client tracking state
* Cluster read-only/asking state
* RESP version (reset to 2)
* Selected database
* CLIENT REPLY state
The response is +RESET to make it easily distinguishable from other
responses.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Itamar Haber <itamar@redislabs.com>
Few config settings are also reflected by the INFO command.
these are mainly ones that are important for either an instant view of
the server status (to compare a metric to it's limit config),
Important configurations that are necessary in the crash log (which
currently doesn't print the config),
And things that are important for monitoring solutions (such as
Prometheus), which rely on INFO to collect their data.
Add cluster_connections to INFO CLUSTER:
This makes it possible to be combined together with connected_clients
and connected_slaves and be matched against maxclients
In redisFork(), we don't set child pid, so updateDictResizePolicy()
doesn't take effect, that isn't friendly for copy-on-write.
The bug was introduced this in redis 6.0: 56258c6
