It turns out that libc malloc can return an allocation of a different size on requests of the same size.
this means that matching MEMORY USAGE of one key to another copy of the same data can fail.
Solution:
Keep running the test that calls MEMORY USAGE, but ignore the response.
We do that by introducing a new utility function to get the memory usage, which always returns 1
when the allocator is not jemalloc.
Other changes:
Some formatting for datatype2.tcl
Co-authored-by: Oran Agra <oran@redislabs.com>
The mess:
Some parts use alsoPropagate for late propagation, others using an immediate one (propagate()),
causing edge cases, ugly/hacky code, and the tendency for bugs
The basic idea is that all commands are propagated via alsoPropagate (i.e. added to a list) and the
top-most call() is responsible for going over that list and actually propagating them (and wrapping
them in MULTI/EXEC if there's more than one command). This is done in the new function,
propagatePendingCommands.
Callers to propagatePendingCommands:
1. top-most call() (we want all nested call()s to add to the also_propagate array and just the top-most
one to propagate them) - via `afterCommand`
2. handleClientsBlockedOnKeys: it is out of call() context and it may propagate stuff - via `afterCommand`.
3. handleClientsBlockedOnKeys edge case: if the looked-up key is already expired, we will propagate the
expire but will not unblock any client so `afterCommand` isn't called. in that case, we have to propagate
the deletion explicitly.
4. cron stuff: active-expire and eviction may also propagate stuff
5. modules: the module API allows to propagate stuff from just about anywhere (timers, keyspace notifications,
threads). I could have tried to catch all the out-of-call-context places but it seemed easier to handle it in one
place: when we free the context. in the spirit of what was done in call(), only the top-most freeing of a module
context may cause propagation.
6. modules: when using a thread-safe ctx it's not clear when/if the ctx will be freed. we do know that the module
must lock the GIL before calling RM_Replicate/RM_Call so we propagate the pending commands when
releasing the GIL.
A "known limitation", which were actually a bug, was fixed because of this commit (see propagate.tcl):
When using a mix of RM_Call with `!` and RM_Replicate, the command would propagate out-of-order:
first all the commands from RM_Call, and then the ones from RM_Replicate
Another thing worth mentioning is that if, in the past, a client would issue a MULTI/EXEC with just one
write command the server would blindly propagate the MULTI/EXEC too, even though it's redundant.
not anymore.
This commit renames propagate() to propagateNow() in order to cause conflicts in pending PRs.
propagatePendingCommands is the only caller of propagateNow, which is now a static, internal helper function.
Optimizations:
1. alsoPropagate will not add stuff to also_propagate if there's no AOF and replicas
2. alsoPropagate reallocs also_propagagte exponentially, to save calls to memmove
Bugfixes:
1. CONFIG SET can create evictions, sending notifications which can cause to dirty++ with modules.
we need to prevent it from propagating to AOF/replicas
2. We need to set current_client in RM_Call. buggy scenario:
- CONFIG SET maxmemory, eviction notifications, module hook calls RM_Call
- assertion in lookupKey crashes, because current_client has CONFIG SET, which isn't CMD_WRITE
3. minor: in eviction, call propagateDeletion after notification, like active-expire and all commands
(we always send a notification before propagating the command)
- add needs:debug flag for some tests
- disable "save" in external tests (speedup?)
- use debug_digest proc instead of debug command directly so it can be skipped
- use OBJECT ENCODING instead of DEBUG OBJECT to get encoding
- add a proc for OBJECT REFCOUNT so it can be skipped
- move a bunch of tests in latency_monitor tests to happen later so that latency monitor has some values in it
- add missing close_replication_stream calls
- make sure to close the temp client if DEBUG LOG fails
This caused a crash when adding elements larger than 2GB to a set (same goes for hash keys). See #8455.
Details:
* The fix makes the dict hash functions receive a `size_t` instead of an `int`. In practice the dict hash functions
call siphash which receives a `size_t` and the callers to the hash function pass a `size_t` to it so the fix is trivial.
* The issue was recreated by attempting to add a >2gb value to a set. Appropriate tests were added where I create
a set with large elements and check basic functionality on it (SADD, SCARD, SPOP, etc...).
* When I added the tests I also refactored a bit all the tests code which is run under the `--large-memory` flag.
This removed code duplication for the test framework's `write_big_bulk` and `write_big_bulk` code and also takes
care of not allocating the test frameworks helper huge string used by these tests when not run under `--large-memory`.
* I also added the _violoations.tcl_ unit tests to be part of the entire test suite and leaned up non relevant list related
tests that were in there. This was done in this PR because most of the _violations_ tests are "large memory" tests.
A test failure was reported in Daily CI (FreeBSD).
`XREAD: XADD + DEL should not awake client`
```
*** [err]: XREAD: XADD + DEL should not awake client in tests/unit/type/stream.tcl
Expected [lindex 0 0] eq {s1} (context: type eval line 11 cmd {assert {[lindex $res 0 0] eq {s1}}} proc ::test)
```
It seems that `r` is executed before `rd` enters the blocking
state. And ended up getting a empty reply by timeout.
We use `wait_for_blocked_clients_count` to wait for the
blocking client to be ready and avoid this situation.
Also fixed other test cases that may have the same issue.
Adds the ability to autogenerate the sequence part of the millisecond-only explicit ID specified for `XADD`. This is useful in case added entries have an externally-provided timestamp without sub-millisecond resolution.
This test relies on that `XREAD BLOCK 20000 STREAMS s1{t} s2{t} s3{t} $ $ $`
is executed by redis before `XADD s2{t} * new abcd1234`. A ` wait_for_blocked_client`
is needed between the two to ensure the order, otherwise `XADD s2{t} * new abcd1234`
might be executed first due to network delay causing a test failure.
Co-authored-by: xiaolei <xiaolei@91jkys.com>
This pr is following #9779 .
## Describe of feature
Now when we turn on the `list-compress-depth` configuration, the list will compress
the ziplist between `[list-compress-depth, -list-compress-depth]`.
When we need to use the compressed data, we will first decompress it, then use it,
and finally compress it again.
It's controlled by `quicklistNode->recompress`, which is designed to avoid the need to
re-traverse the entire quicklist for compression after each decompression, we only need
to recompress the quicklsitNode being used.
In order to ensure the correctness of recompressing, we should normally let
quicklistDecompressNodeForUse and quicklistCompress appear in pairs, otherwise,
it may lead to the head and tail being compressed or the middle ziplist not being
compressed correctly, which is exactly the problem this pr needs to solve.
## Solution
1. Reset `quicklistIter` after insert and replace.
The quicklist node will be compressed in `quicklistInsertAfter`, `quicklistInsertBefore`,
`quicklistReplaceAtIndex`, so we can safely reset the quicklistIter to avoid it being used again
2. `quicklistIndex` will return an iterator that can be used to recompress the current node after use.
## Test
1. In the `Stress Tester for #3343-Similar Errors` test, when the server crashes or when
`valgrind` or `asan` error is detected, print violating commands.
2. Add a crash test due to wrongly recompressing after `lrem`.
3. Remove `insert before with 0 elements` and `insert after with 0 elements`,
Now we forbid any operation on an NULL quicklistIter.
In order to test the situation where multiple clients are
blocked, we set up multiple clients to execute some blocking
commands. These tests depend on the order of command processing.
Those tests are based on the wrong assumption that the command
send first will be executed by the server first, which is obviously
wrong in some network delyas.
This commit ensures orderly execution of commands by waiting
and judging the number of blocked clients each time.
Fix#9850
Writable replicas now no longer use the values of expired keys. Expired keys are
deleted when lookupKeyWrite() is used, even on a writable replica. Previously,
writable replicas could use the value of an expired key in write commands such
as INCR, SUNIONSTORE, etc..
This commit also sorts out the mess around the functions lookupKeyRead() and
lookupKeyWrite() so they now indicate what we intend to do with the key and
are not affected by the command calling them.
Multi-key commands like SUNIONSTORE, ZUNIONSTORE, COPY and SORT with the
store option now use lookupKeyRead() for the keys they're reading from (which will
not allow reading from logically expired keys).
This commit also fixes a bug where PFCOUNT could return a value of an
expired key.
Test modules commands have their readonly and write flags updated to correctly
reflect their lookups for reading or writing. Modules are not required to
correctly reflect this in their command flags, but this change is made for
consistency since the tests serve as usage examples.
Fixes#6842. Fixes#7475.
Recently we started using list-compress-depth in tests (was completely untested till now).
Turns this triggered test failures with the external mode, since the tests left the setting enabled
and then it was used in other tests (specifically the fuzzer named "Stress tester for #3343-alike bugs").
This PR fixes the issue of the `recompress` flag being left set by mistake, which caused the code to
later to compress the head or tail nodes (which should never be compressed)
The solution is to reset the recompress flag when it should have been (when it was decided not to compress).
Additionally we're adding some assertions and improve the tests so in order to catch other similar bugs.
Drop the STRALGO command, now LCS is a command of its own and it only works on keys (not input strings).
The motivation is that STRALGO's syntax was really messed-up...
- assumes all (future) string algorithms will take similar arguments
- mixes command that takes keys and one that doesn't in the same command.
- make it nearly impossible to expose the right key spec in COMMAND INFO (issues cluster clients)
- hard for cluster clients to determine the key names (firstkey, lastkey, etc)
- hard for ACL / flags (is it a read command?)
This is a breaking change.
Moves ZPOP ... 0 fast exit path after type check to reply with
WRONGTYPE. In the past it will return an empty array.
Also now count is not allowed to be negative.
see #9680
before:
```
127.0.0.1:6379> set zset str
OK
127.0.0.1:6379> zpopmin zset 0
(empty array)
127.0.0.1:6379> zpopmin zset -1
(empty array)
```
after:
```
127.0.0.1:6379> set zset str
OK
127.0.0.1:6379> zpopmin zset 0
(error) WRONGTYPE Operation against a key holding the wrong kind of value
127.0.0.1:6379> zpopmin zset -1
(error) ERR value is out of range, must be positive
```
Two issues:
1. In many tests we simply forgot to close the connections we created, which doesn't matter for normal tests where the server is killed, but creates a leak on external server tests.
2. When calling `start_server` on external test we create a fresh connection instead of really starting a new server, but never clean it at the end.
Introduced in #8179, this fixes the command's replies in the 0 count edge case.
[BREAKING] changes the reply type when count is 0 to an empty array (instead of nil)
Moves LPOP ... 0 fast exit path after type check to reply with WRONGTYPE
Redis lists are stored in quicklist, which is currently a linked list of ziplists.
Ziplists are limited to storing elements no larger than 4GB, so when bigger
items are added they're getting truncated.
This PR changes quicklists so that they're capable of storing large items
in quicklist nodes that are plain string buffers rather than ziplist.
As part of the PR there were few other changes in redis:
1. new DEBUG sub-commands:
- QUICKLIST-PACKED-THRESHOLD - set the threshold of for the node type to
be plan or ziplist. default (1GB)
- QUICKLIST <key> - Shows low level info about the quicklist encoding of <key>
2. rdb format change:
- A new type was added - RDB_TYPE_LIST_QUICKLIST_2 .
- container type (packed / plain) was added to the beginning of the rdb object
(before the actual node list).
3. testing:
- Tests that requires over 100MB will be by default skipped. a new flag was
added to 'runtest' to run the large memory tests (not used by default)
Co-authored-by: sundb <sundbcn@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
The previous code did not check whether COUNT is set.
So we can use `lmpop 2 key1 key2 left count 1 count 2`.
This situation can occur in LMPOP/BLMPOP/ZMPOP/BZMPOP commands.
LMPOP/BLMPOP introduced in #9373, ZMPOP/BZMPOP introduced in #9484.
## Intro
The purpose is to allow having different flags/ACL categories for
subcommands (Example: CONFIG GET is ok-loading but CONFIG SET isn't)
We create a small command table for every command that has subcommands
and each subcommand has its own flags, etc. (same as a "regular" command)
This commit also unites the Redis and the Sentinel command tables
## Affected commands
CONFIG
Used to have "admin ok-loading ok-stale no-script"
Changes:
1. Dropped "ok-loading" in all except GET (this doesn't change behavior since
there were checks in the code doing that)
XINFO
Used to have "read-only random"
Changes:
1. Dropped "random" in all except CONSUMERS
XGROUP
Used to have "write use-memory"
Changes:
1. Dropped "use-memory" in all except CREATE and CREATECONSUMER
COMMAND
No changes.
MEMORY
Used to have "random read-only"
Changes:
1. Dropped "random" in PURGE and USAGE
ACL
Used to have "admin no-script ok-loading ok-stale"
Changes:
1. Dropped "admin" in WHOAMI, GENPASS, and CAT
LATENCY
No changes.
MODULE
No changes.
SLOWLOG
Used to have "admin random ok-loading ok-stale"
Changes:
1. Dropped "random" in RESET
OBJECT
Used to have "read-only random"
Changes:
1. Dropped "random" in ENCODING and REFCOUNT
SCRIPT
Used to have "may-replicate no-script"
Changes:
1. Dropped "may-replicate" in all except FLUSH and LOAD
CLIENT
Used to have "admin no-script random ok-loading ok-stale"
Changes:
1. Dropped "random" in all except INFO and LIST
2. Dropped "admin" in ID, TRACKING, CACHING, GETREDIR, INFO, SETNAME, GETNAME, and REPLY
STRALGO
No changes.
PUBSUB
No changes.
CLUSTER
Changes:
1. Dropped "admin in countkeysinslots, getkeysinslot, info, nodes, keyslot, myid, and slots
SENTINEL
No changes.
(note that DEBUG also fits, but we decided not to convert it since it's for
debugging and anyway undocumented)
## New sub-command
This commit adds another element to the per-command output of COMMAND,
describing the list of subcommands, if any (in the same structure as "regular" commands)
Also, it adds a new subcommand:
```
COMMAND LIST [FILTERBY (MODULE <module-name>|ACLCAT <cat>|PATTERN <pattern>)]
```
which returns a set of all commands (unless filters), but excluding subcommands.
## Module API
A new module API, RM_CreateSubcommand, was added, in order to allow
module writer to define subcommands
## ACL changes:
1. Now, that each subcommand is actually a command, each has its own ACL id.
2. The old mechanism of allowed_subcommands is redundant
(blocking/allowing a subcommand is the same as blocking/allowing a regular command),
but we had to keep it, to support the widespread usage of allowed_subcommands
to block commands with certain args, that aren't subcommands (e.g. "-select +select|0").
3. I have renamed allowed_subcommands to allowed_firstargs to emphasize the difference.
4. Because subcommands are commands in ACL too, you can now use "-" to block subcommands
(e.g. "+client -client|kill"), which wasn't possible in the past.
5. It is also possible to use the allowed_firstargs mechanism with subcommand.
For example: `+config -config|set +config|set|loglevel` will block all CONFIG SET except
for setting the log level.
6. All of the ACL changes above required some amount of refactoring.
## Misc
1. There are two approaches: Either each subcommand has its own function or all
subcommands use the same function, determining what to do according to argv[0].
For now, I took the former approaches only with CONFIG and COMMAND,
while other commands use the latter approach (for smaller blamelog diff).
2. Deleted memoryGetKeys: It is no longer needed because MEMORY USAGE now uses the "range" key spec.
4. Bugfix: GETNAME was missing from CLIENT's help message.
5. Sentinel and Redis now use the same table, with the same function pointer.
Some commands have a different implementation in Sentinel, so we redirect
them (these are ROLE, PUBLISH, and INFO).
6. Command stats now show the stats per subcommand (e.g. instead of stats just
for "config" you will have stats for "config|set", "config|get", etc.)
7. It is now possible to use COMMAND directly on subcommands:
COMMAND INFO CONFIG|GET (The pipeline syntax was inspired from ACL, and
can be used in functions lookupCommandBySds and lookupCommandByCString)
8. STRALGO is now a container command (has "help")
## Breaking changes:
1. Command stats now show the stats per subcommand (see (5) above)
Note that this breaks compatibility because in the past doing:
DECRBY x -9223372036854775808
would succeed (and create an invalid result) and now this returns an error.
This is similar to the recent addition of LMPOP/BLMPOP (#9373), but zset.
Syntax for the new ZMPOP command:
`ZMPOP numkeys [<key> ...] MIN|MAX [COUNT count]`
Syntax for the new BZMPOP command:
`BZMPOP timeout numkeys [<key> ...] MIN|MAX [COUNT count]`
Some background:
- ZPOPMIN/ZPOPMAX take only one key, and can return multiple elements.
- BZPOPMIN/BZPOPMAX take multiple keys, but return only one element from just one key.
- ZMPOP/BZMPOP can take multiple keys, and can return multiple elements from just one key.
Note that ZMPOP/BZMPOP can take multiple keys, it eventually operates on just on key.
And it will propagate as ZPOPMIN or ZPOPMAX with the COUNT option.
As new commands, if we can not pop any elements, the response like:
- ZMPOP: Return a NIL in both RESP2 and RESP3, unlike ZPOPMIN/ZPOPMAX return emptyarray.
- BZMPOP: Return a NIL in both RESP2 and RESP3 when timeout is reached, like BZPOPMIN/BZPOPMAX.
For the normal response is nested arrays in RESP2 and RESP3:
```
ZMPOP/BZMPOP
1) keyname
2) 1) 1) member1
2) score1
2) 1) member2
2) score2
In RESP2:
1) "myzset"
2) 1) 1) "three"
2) "3"
2) 1) "two"
2) "2"
In RESP3:
1) "myzset"
2) 1) 1) "three"
2) (double) 3
2) 1) "two"
2) (double) 2
```
Implements the [LIMIT limit] variant of SINTERCARD/ZINTERCARD.
Now with the LIMIT, we can stop the searching when cardinality
reaching the limit, and return the cardinality ASAP.
Note that in SINTERCARD, the old synatx was: `SINTERCARD key [key ...]`
In order to add a optional parameter, we must break the old synatx.
So the new syntax of SINTERCARD will be consistent with ZINTERCARD.
New syntax: `SINTERCARD numkeys key [key ...] [LIMIT limit]`.
Note that this means that SINTERCARD has a different syntax than
SINTER and SINTERSTORE (taking numkeys argument)
As for ZINTERCARD, we can easily add a optional parameter to it.
New syntax: `ZINTERCARD numkeys key [key ...] [LIMIT limit]`
Part two of implementing #8702 (zset), after #8887.
## Description of the feature
Replaced all uses of ziplist with listpack in t_zset, and optimized some of the code to optimize performance.
## Rdb format changes
New `RDB_TYPE_ZSET_LISTPACK` rdb type.
## Rdb loading improvements:
1) Pre-expansion of dict for validation of duplicate data for listpack and ziplist.
2) Simplifying the release of empty key objects when RDB loading.
3) Unify ziplist and listpack data verify methods for zset and hash, and move code to rdb.c.
## Interface changes
1) New `zset-max-listpack-entries` config is an alias for `zset-max-ziplist-entries` (same with `zset-max-listpack-value`).
2) OBJECT ENCODING will return listpack instead of ziplist.
## Listpack improvements:
1) Add `lpDeleteRange` and `lpDeleteRangeWithEntry` functions to delete a range of entries from listpack.
2) Improve the performance of `lpCompare`, converting from string to integer is faster than converting from integer to string.
3) Replace `snprintf` with `ll2string` to improve performance in converting numbers to strings in `lpGet()`.
## Zset improvements:
1) Improve the performance of `zzlFind` method, use `lpFind` instead of `lpCompare` in a loop.
2) Use `lpDeleteRangeWithEntry` instead of `lpDelete` twice to delete a element of zset.
## Tests
1) Add some unittests for `lpDeleteRange` and `lpDeleteRangeWithEntry` function.
2) Add zset RDB loading test.
3) Add benchmark test for `lpCompare` and `ziplsitCompare`.
4) Add empty listpack zset corrupt dump test.
We want to add COUNT option for BLPOP.
But we can't do it without breaking compatibility due to the command arguments syntax.
So this commit introduce two new commands.
Syntax for the new LMPOP command:
`LMPOP numkeys [<key> ...] LEFT|RIGHT [COUNT count]`
Syntax for the new BLMPOP command:
`BLMPOP timeout numkeys [<key> ...] LEFT|RIGHT [COUNT count]`
Some background:
- LPOP takes one key, and can return multiple elements.
- BLPOP takes multiple keys, but returns one element from just one key.
- LMPOP can take multiple keys and return multiple elements from just one key.
Note that LMPOP/BLMPOP can take multiple keys, it eventually operates on just one key.
And it will propagate as LPOP or RPOP with the COUNT option.
As a new command, it still return NIL if we can't pop any elements.
For the normal response is nested arrays in RESP2 and RESP3, like:
```
LMPOP/BLMPOP
1) keyname
2) 1) element1
2) element2
```
I.e. unlike BLPOP that returns a key name and one element so it uses a flat array,
and LPOP that returns multiple elements with no key name, and again uses a flat array,
this one has to return a nested array, and it does for for both RESP2 and RESP3 (like SCAN does)
Some discuss can see: #766#8824
Part one of implementing #8702 (taking hashes first before other types)
## Description of the feature
1. Change ziplist encoded hash objects to listpack encoding.
2. Convert existing ziplists on RDB loading time. an O(n) operation.
## Rdb format changes
1. Add RDB_TYPE_HASH_LISTPACK rdb type.
2. Bump RDB_VERSION to 10
## Interface changes
1. New `hash-max-listpack-entries` config is an alias for `hash-max-ziplist-entries` (same with `hash-max-listpack-value`)
2. OBJECT ENCODING will return `listpack` instead of `ziplist`
## Listpack improvements:
1. Support direct insert, replace integer element (rather than convert back and forth from string)
3. Add more listpack capabilities to match the ziplist ones (like `lpFind`, `lpRandomPairs` and such)
4. Optimize element length fetching, avoid multiple calculations
5. Use inline to avoid function call overhead.
## Tests
1. Add a new test to the RDB load time conversion
2. Adding the listpack unit tests. (based on the one in ziplist.c)
3. Add a few "corrupt payload: fuzzer findings" tests, and slightly modify existing ones.
Co-authored-by: Oran Agra <oran@redislabs.com>
Add SINTERCARD and ZINTERCARD commands that are similar to
ZINTER and SINTER but only return the cardinality with minimum
processing and memory overheads.
Co-authored-by: Oran Agra <oran@redislabs.com>
due to a copy-paste bug, it used to reply with null response rather than empty array.
this commit includes new tests that are looking at the RESP response directly in
order to be able to tell the difference between them.
Co-authored-by: Oran Agra <oran@redislabs.com>
Return a bad score when used with negative count (or count of 1), and non-ziplist encoded zset.
Also add test to validate the return value and cover the issue.
When using RESP3, ZPOPMAX/ZPOPMIN should return nested arrays for consistency
with other commands (e.g. ZRANGE).
We do that only when COUNT argument is present (similarly to how LPOP behaves).
for reasoning see https://github.com/redis/redis/issues/8824#issuecomment-855427955
This is a breaking change only when RESP3 is used, and COUNT argument is present!
SINTERSTORE would have deleted the dest key right away,
even when later on it is bound to fail on an (WRONGTYPE) error.
With this change it first picks up all the input keys, and only later
delete the dest key if one is empty.
Also add more tests for some commands.
Mainly focus on
- `wrong type error`:
expand test case (base on sinter bug) in non-store variant
add tests for store variant (although it exists in non-store variant, i think it would be better to have same tests)
- the dstkey result when we meet `non-exist key (empty set)` in *store
sdiff:
- improve test case about wrong type error (the one we found in sinter, although it is safe in sdiff)
- add test about using non-exist key (treat it like an empty set)
sdiffstore:
- according to sdiff test case, also add some tests about `wrong type error` and `non-exist key`
- the different is that in sdiffstore, we will consider the `dstkey` result
sunion/sunionstore add more tests (same as above)
sinter/sinterstore also same as above ...
This PR adds a spell checker CI action that will fail future PRs if they introduce typos and spelling mistakes.
This spell checker is based on blacklist of common spelling mistakes, so it will not catch everything,
but at least it is also unlikely to cause false positives.
Besides that, the PR also fixes many spelling mistakes and types, not all are a result of the spell checker we use.
Here's a summary of other changes:
1. Scanned the entire source code and fixes all sorts of typos and spelling mistakes (including missing or extra spaces).
2. Outdated function / variable / argument names in comments
3. Fix outdated keyspace masks error log when we check `config.notify-keyspace-events` in loadServerConfigFromString.
4. Trim the white space at the end of line in `module.c`. Check: https://github.com/redis/redis/pull/7751
5. Some outdated https link URLs.
6. Fix some outdated comment. Such as:
- In README: about the rdb, we used to said create a `thread`, change to `process`
- dbRandomKey function coment (about the dictGetRandomKey, change to dictGetFairRandomKey)
- notifyKeyspaceEvent fucntion comment (add type arg)
- Some others minor fix in comment (Most of them are incorrectly quoted by variable names)
7. Modified the error log so that users can easily distinguish between TCP and TLS in `changeBindAddr`
This commit revives the improves the ability to run the test suite against
external servers, instead of launching and managing `redis-server` processes as
part of the test fixture.
This capability existed in the past, using the `--host` and `--port` options.
However, it was quite limited and mostly useful when running a specific tests.
Attempting to run larger chunks of the test suite experienced many issues:
* Many tests depend on being able to start and control `redis-server` themselves,
and there's no clear distinction between external server compatible and other
tests.
* Cluster mode is not supported (resulting with `CROSSSLOT` errors).
This PR cleans up many things and makes it possible to run the entire test suite
against an external server. It also provides more fine grained controls to
handle cases where the external server supports a subset of the Redis commands,
limited number of databases, cluster mode, etc.
The tests directory now contains a `README.md` file that describes how this
works.
This commit also includes additional cleanups and fixes:
* Tests can now be tagged.
* Tag-based selection is now unified across `start_server`, `tags` and `test`.
* More information is provided about skipped or ignored tests.
* Repeated patterns in tests have been extracted to common procedures, both at a
global level and on a per-test file basis.
* Cleaned up some cases where test setup was based on a previous test executing
(a major anti-pattern that repeats itself in many places).
* Cleaned up some cases where test teardown was not part of a test (in the
future we should have dedicated teardown code that executes even when tests
fail).
* Fixed some tests that were flaky running on external servers.
Till now GET and NX were mutually exclusive.
This change make their combination mean a "Get or Set" command.
If the key exists it returns the old value and avoids setting,
and if it does't exist it returns nil and sets it to the new value (possibly with expiry time)
The decision to stop trimming due to LIMIT in XADD and XTRIM was after the limit was reached.
i.e. the code was deleting **at least** that count of records (from the LIMIT argument's perspective, not the MAXLEN),
instead of **up to** that count of records.
see #9046
Fix out of range error messages to be clearer (avoid mentioning 9223372036854775807)
* Fix XAUTOCLAIM COUNT option confusing error msg
* Fix other RPOP and alike error message to mention positive
This command used to return the last scanned entry id as the cursor,
instead of the next one to be scanned.
so in the next call, the user could / should have sent `(cursor` and not
just `cursor` if he wanted to avoid scanning the same record twice.
Scanning the record twice would look odd if someone is checking what
exactly was scanned, but it also has a side effect of incrementing the
delivery count twice.
If GT/LT fails the operation we need to reply with
nill (like failure due to NX).
Other changes:
Add the missing $encoding suffix to many zset tests
Note: there's a behavior change just in case of INCR + GT/LT that fails.
The old code was replying with the wrong (rejected) score, and now it'll reply with nil.
Note that that's anyway a corner case so this "behavior change" shouldn't have too much affect.
Using GT/LT with INCR has a predictable result even before we run the command
(INCR GT will only only / always fail if the increment is negative).
Problem:
Currently, when performing random distribution verification, we determine
the probability of each element occurring in the sum, but the probability is
only an estimate, these tests had rare sporadic failures, and we cannot verify
what the probability of failure will be.
Solution:
Using the chi-square distribution instead of the original random distribution
validation makes the test more reasonable and easier to find problems.
Changes to HRANDFIELD and ZRANDMEMBER:
* Fix risk of OOM panic when client query a very big negative count (avoid allocating huge temporary buffer).
* Fix uneven random distribution in HRANDFIELD with negative count (wasn't using dictGetFairRandomKey).
* Add tests to check an even random distribution (HRANDFIELD, SRANDMEMBER, ZRANDMEMBER).
Co-authored-by: Oran Agra <oran@redislabs.com>
New commands:
`HRANDFIELD [<count> [WITHVALUES]]`
`ZRANDMEMBER [<count> [WITHSCORES]]`
Algorithms are similar to the one in SRANDMEMBER.
Both return a simple bulk response when no arguments are given, and an array otherwise.
In case values/scores are requested, RESP2 returns a long array, and RESP3 a nested array.
note: in all 3 commands, the only option that also provides random order is the one with negative count.
Changes to SRANDMEMBER
* Optimization when count is 1, we can use the more efficient algorithm of non-unique random
* optimization: work with sds strings rather than robj
Other changes:
* zzlGetScore: when zset needs to convert string to double, we use safer memcpy (in
case the buffer is too small)
* Solve a "bug" in SRANDMEMBER test: it intended to test a positive count (case 3 or
case 4) and by accident used a negative count
Co-authored-by: xinluton <xinluton@qq.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
This commit introduces two new command and two options for an existing command
GETEX <key> [PERSIST][EX seconds][PX milliseconds] [EXAT seconds-timestamp]
[PXAT milliseconds-timestamp]
The getexCommand() function implements extended options and variants of the GET
command. Unlike GET command this command is not read-only. Only one of the options
can be used at a given time.
1. PERSIST removes any TTL associated with the key.
2. EX Set expiry TTL in seconds.
3. PX Set expiry TTL in milliseconds.
4. EXAT Same like EX instead of specifying the number of seconds representing the
TTL (time to live), it takes an absolute Unix timestamp
5. PXAT Same like PX instead of specifying the number of milliseconds representing the
TTL (time to live), it takes an absolute Unix timestamp
Command would return either the bulk string, error or nil.
GETDEL <key>
Would delete the key after getting.
SET key value [NX] [XX] [KEEPTTL] [GET] [EX <seconds>] [PX <milliseconds>]
[EXAT <seconds-timestamp>][PXAT <milliseconds-timestamp>]
Two new options added here are EXAT and PXAT
Key implementation notes
- `SET` with `PX/EX/EXAT/PXAT` is always translated to `PXAT` in `AOF`. When relative time is
specified (`PX/EX`), replication will always use `PX`.
- `setexCommand` and `psetexCommand` would no longer need translation in `feedAppendOnlyFile`
as they are modified to invoke `setGenericCommand ` with appropriate flags which will take care of
correct AOF translation.
- `GETEX` without any optional argument behaves like `GET`.
- `GETEX` command is never propagated, It is either propagated as `PEXPIRE[AT], or PERSIST`.
- `GETDEL` command is propagated as `DEL`
- Combined the validation for `SET` and `GETEX` arguments.
- Test cases to validate AOF/Replication propagation
It was confusing as to why these don't return a map type.
the reason is that order matters, so we need to make sure the client
library knows to respect it.
Added comments in the implementation and tests to cover it.
This PR adds another trimming strategy to XADD and XTRIM named MINID
(complements the existing MAXLEN).
It also adds a new LIMIT argument that allows incremental trimming by repeated
calls (rather than all at once).
This provides the ability to trim all records older than a certain ID (which makes it
possible for the user to trim by age too).
Example:
XTRIM mystream MINID ~ 1608540753 will trim entries with id < 1608540753,
but might not trim all (because of the ~ modifier)
The purpose is to ease the use of streams. many users use streams as logs and
the common case is wanting a log
of the last X seconds rather than a log that contains maximum X entries (new
MINID vs existing MAXLEN)
The new LIMIT modifier is only supported when the trim strategy uses ~.
i.e. when the user asked for exact trimming, it all happens in one go (no
possibility for incremental trimming).
However, when ~ is provided, we trim full rax nodes, up to the limit number
of records.
The default limit is 100*stream_node_max_entries (used when LIMIT is not
provided).
I.e. this is a behavior change (even if the existing MAXLEN strategy is used).
An explicit limit of 0 means unlimited (but note that it's not the default).
Other changes:
Refactor arg parsing code for XADD and XTRIM to use common code.
Add ZRANGESTORE command, and improve ZSTORE command to deprecated Z[REV]RANGE[BYSCORE|BYLEX].
Syntax for the new ZRANGESTORE command:
ZRANGESTORE [BYSCORE | BYLEX] [REV] [LIMIT offset count]
New syntax for ZRANGE:
ZRANGE [BYSCORE | BYLEX] [REV] [WITHSCORES] [LIMIT offset count]
Old syntax for ZRANGE:
ZRANGE [WITHSCORES]
Other ZRANGE commands remain unchanged.
The implementation uses common code for all of these, by utilizing a consumer interface that in one
command response to the client, and in the other command stores a zset key.
Co-authored-by: Oran Agra <oran@redislabs.com>
New command: XAUTOCLAIM <key> <group> <consumer> <min-idle-time> <start> [COUNT <count>] [JUSTID]
The purpose is to claim entries from a stale consumer without the usual
XPENDING+XCLAIM combo which takes two round trips.
The syntax for XAUTOCLAIM is similar to scan: A cursor is returned (streamID)
by each call and should be used as start for the next call. 0-0 means the scan is complete.
This PR extends the deferred reply mechanism for any bulk string (not just counts)
This PR carries some unrelated test code changes:
- Renames the term "client" into "consumer" in the stream-cgroups test
- And also changes DEBUG SLEEP into "after"
Co-authored-by: Oran Agra <oran@redislabs.com>
Adds: `L/RPOP <key> [count]`
Implements no. 2 of the following strategies:
1. Loop on listTypePop - this would result in multiple calls for memory freeing and allocating (see 769167a079)
2. Iterate the range to build the reply, then call quickListDelRange - this requires two iterations and **is the current choice**
3. Refactor quicklist to have a pop variant of quickListDelRange - probably optimal but more complex
Also:
* There's a historical check for NULL after calling listTypePop that was converted to an assert.
* This refactors common logic shared between LRANGE and the new form of LPOP/RPOP into addListRangeReply (adds test for b/w compat)
* Consequently, it may have made sense to have `LRANGE l -1 -2` and `LRANGE l 9 0` be legit and return a reverse reply. Due to historical reasons that would be, however, a breaking change.
* Added minimal comments to existing commands to adhere to the style, make core dev life easier and get commit karma, naturally.
