- add needs:debug flag for some tests
- disable "save" in external tests (speedup?)
- use debug_digest proc instead of debug command directly so it can be skipped
- use OBJECT ENCODING instead of DEBUG OBJECT to get encoding
- add a proc for OBJECT REFCOUNT so it can be skipped
- move a bunch of tests in latency_monitor tests to happen later so that latency monitor has some values in it
- add missing close_replication_stream calls
- make sure to close the temp client if DEBUG LOG fails
In #8287, some overflow checks have been added. But when
`when *= 1000` overflows, it will become a positive number.
And the check not able to catch it. The key will be added with
a short expiration time and will deleted a few seconds later.
In #9601, will check the overflow after `*=` and return an
error first, and avoiding this situation.
In this commit, added some tests to cover those code paths.
Found it in #9825, and close it.
The `PEXPIRE/PSETEX/PEXPIREAT can set sub-second expires` test is
a very time sensitive test, it used to occasionally fail on MacOS.
It will perform there internal tests in a loop, as long as one
fails, it will try to excute again in the next loop.
oranagra suggested that we can split it into three individual tests,
so that if one fails, we do not need to retry the others. And maybe
it will increase the chances of success dramatically.
Each is executed 500 times, and the number of retries is collected:
```
PSETEX, total: 500, sum: 745, min: 0, max: 13, avg: 1.49
PEXPIRE, total: 500, sum: 575, min: 0, max: 16, avg: 1.15
PEXPIREAT, total: 500, sum: 0, min: 0, max: 0, avg: 0.0
ALL(old_way), total: 500, sum: 8090, min: 0, max: 138, avg: 16.18
```
And we can see the threshold is very low.
Splitting the test also makes the code better to maintain.
Co-authored-by: Oran Agra <oran@redislabs.com>
I have seen this CI failure twice on MacOS:
*** [err]: PEXPIRE/PSETEX/PEXPIREAT can set sub-second expires in tests/unit/expire.tcl
Expected 'somevalue {} somevalue {} somevalue {}' to equal or match '{} {} {} {} somevalue {}'
I did some loop test in my own daily CI, the results show that is
not particularly stable. Change the threshold from 30 to 50.
Add NX, XX, GT, and LT flags to EXPIRE, PEXPIRE, EXPIREAT, PEXAPIREAT.
- NX - only modify the TTL if no TTL is currently set
- XX - only modify the TTL if there is a TTL currently set
- GT - only increase the TTL (considering non-volatile keys as infinite expire time)
- LT - only decrease the TTL (considering non-volatile keys as infinite expire time)
return value of the command is 0 when the operation was skipped due to one of these flags.
Signed-off-by: Ning Sun <sunng@protonmail.com>
The root cause is that one test (`5 keys in, 5 keys out`) is leaking a volatile key
that can expire while another later test(`All TTL in commands are propagated
as absolute timestamp in replication stream`) is running.
Such leaked expiration injects an unexpected `DEL` command into the
replication command during the later test, causing it to fail.
The fixes are two fold:
1. Plug the leak in the first test.
2. Add FLUSHALL to the later test, to avoid future interference from other tests.
This commit revives the improves the ability to run the test suite against
external servers, instead of launching and managing `redis-server` processes as
part of the test fixture.
This capability existed in the past, using the `--host` and `--port` options.
However, it was quite limited and mostly useful when running a specific tests.
Attempting to run larger chunks of the test suite experienced many issues:
* Many tests depend on being able to start and control `redis-server` themselves,
and there's no clear distinction between external server compatible and other
tests.
* Cluster mode is not supported (resulting with `CROSSSLOT` errors).
This PR cleans up many things and makes it possible to run the entire test suite
against an external server. It also provides more fine grained controls to
handle cases where the external server supports a subset of the Redis commands,
limited number of databases, cluster mode, etc.
The tests directory now contains a `README.md` file that describes how this
works.
This commit also includes additional cleanups and fixes:
* Tests can now be tagged.
* Tag-based selection is now unified across `start_server`, `tags` and `test`.
* More information is provided about skipped or ignored tests.
* Repeated patterns in tests have been extracted to common procedures, both at a
global level and on a per-test file basis.
* Cleaned up some cases where test setup was based on a previous test executing
(a major anti-pattern that repeats itself in many places).
* Cleaned up some cases where test teardown was not part of a test (in the
future we should have dedicated teardown code that executes even when tests
fail).
* Fixed some tests that were flaky running on external servers.
The test that was merged yesterday fails with valgrind and freebsd CI
that are too slow, and 10 seconds apparently passed between the time the
command was sent to redis and the time it was actually executed.
```
*** [err]: All TTL in commands are propagated as absolute timestamp in replication stream in tests/unit/expire.tcl
Expected 'del a' to match 'set foo1 bar PXAT *' (context: type source line 778 file /home/runner/work/redis/redis/tests/test_helper.tcl cmd {assert_match [lindex $patterns $j] [read_from_replication_stream $s]} proc ::assert_replication_stream level 1)
```
Till now, on replica full-sync we used to transfer absolute time for TTL,
however when a command arrived (EXPIRE or EXPIREAT),
we used to propagate it as is to replicas (possibly with relative time),
but always translate it to EXPIREAT (absolute time) to AOF.
This commit changes that and will always use absolute time for propagation.
see discussion in #8433
Furthermore, we Introduce new commands: `EXPIRETIME/PEXPIRETIME`
that allow extracting the absolute TTL time from a key.
Respond with error if expire time overflows from positive to negative of vice versa.
* `SETEX`, `SET EX`, `GETEX` etc would have already error on negative value,
but now they would also error on overflows (i.e. when the input was positive but
after the manipulation it becomes negative, which would have passed before)
* `EXPIRE` and `EXPIREAT` was ok taking negative values (would implicitly delete
the key), we keep that, but we do error if the user provided a value that changes
sign when manipulated (except the case of changing sign when `basetime` is added)
Signed-off-by: Gnanesh <gnaneshkunal@outlook.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
This commit introduces two new command and two options for an existing command
GETEX <key> [PERSIST][EX seconds][PX milliseconds] [EXAT seconds-timestamp]
[PXAT milliseconds-timestamp]
The getexCommand() function implements extended options and variants of the GET
command. Unlike GET command this command is not read-only. Only one of the options
can be used at a given time.
1. PERSIST removes any TTL associated with the key.
2. EX Set expiry TTL in seconds.
3. PX Set expiry TTL in milliseconds.
4. EXAT Same like EX instead of specifying the number of seconds representing the
TTL (time to live), it takes an absolute Unix timestamp
5. PXAT Same like PX instead of specifying the number of milliseconds representing the
TTL (time to live), it takes an absolute Unix timestamp
Command would return either the bulk string, error or nil.
GETDEL <key>
Would delete the key after getting.
SET key value [NX] [XX] [KEEPTTL] [GET] [EX <seconds>] [PX <milliseconds>]
[EXAT <seconds-timestamp>][PXAT <milliseconds-timestamp>]
Two new options added here are EXAT and PXAT
Key implementation notes
- `SET` with `PX/EX/EXAT/PXAT` is always translated to `PXAT` in `AOF`. When relative time is
specified (`PX/EX`), replication will always use `PX`.
- `setexCommand` and `psetexCommand` would no longer need translation in `feedAppendOnlyFile`
as they are modified to invoke `setGenericCommand ` with appropriate flags which will take care of
correct AOF translation.
- `GETEX` without any optional argument behaves like `GET`.
- `GETEX` command is never propagated, It is either propagated as `PEXPIRE[AT], or PERSIST`.
- `GETDEL` command is propagated as `DEL`
- Combined the validation for `SET` and `GETEX` arguments.
- Test cases to validate AOF/Replication propagation
This commit adds tests to make sure that relative and absolute expire commands
are propagated as is to replicas and stop any future attempt to change that without
a proper discussion. see #8327 and #5171
Additionally it slightly improve the AOF test that tests the opposite (always
propagating absolute times), by covering more commands, and shaving 2
seconds from the test time.
This test was nearly always failing on MacOS github actions.
This is because of bugs in the test that caused it to nearly always run
all 3 attempts and just look at the last one as the pass/fail creteria.
i.e. the test was nearly always running all 3 attempts and still sometimes
succeed. this is because the break condition was different than the test
completion condition.
The reason the test succeeded is because the break condition tested the
results of all 3 tests (PSETEX/PEXPIRE/PEXPIREAT), but the success check
at the end was only testing the result of PSETEX.
The reason the PEXPIREAT test nearly always failed is because it was
getting the current time wrong: getting the current second and loosing
the sub-section time, so the only chance for it to succeed is if it run
right when a certain second started.
Because i now get the time from redis, adding another round trip, i
added another 100ms to the PEXPIRE test to make it less fragile, and
also added many more attempts.
Adding many more attempts before failure to account for slow platforms,
github actions and valgrind
The previous behavior was to return -1 if:
1) Existing key but without an expire set.
2) Non existing key.
Now the second case is handled in a different, and TTL will return -2
if the key does not exist at all.
PTTL follows the same behavior as well.
