There is a built in limit to client side tracking keys, which when exceeded will invalidate keys. This occurs in two places, one in the server cron and other before executing a command. If it happens in the second scenario, the invalidations will be queued for later since current client is set. This queue is never drained if a command is not executed (through call) such as a multi-exec command getting queued. This results in a later server assert crashing.
* Make it clear that current_client is the root client that was called by
external connection
* add executing_client which is the client that runs the current command
(can be a module or a script)
* Remove script_caller that was used for commands that have CLIENT_SCRIPT
to get the client that called the script. in most cases, that's the current_client,
and in others (when being called from a module), it could be an intermediate
client when we actually want the original one used by the external connection.
bugfixes:
* RM_Call with C flag should log ACL errors with the requested user rather than
the one used by the original client, this also solves a crash when RM_Call is used
with C flag from a detached thread safe context.
* addACLLogEntry would have logged info about the script_caller, but in case the
script was issued by a module command we actually want the current_client. the
exception is when RM_Call is called from a timer event, in which case we don't
have a current_client.
behavior changes:
* client side tracking for scripts now tracks the keys that are read by the script
instead of the keys that are declared by the caller for EVAL
other changes:
* Log both current_client and executing_client in the crash log.
* remove prepareLuaClient and resetLuaClient, being dead code that was forgotten.
* remove scriptTimeSnapshot and snapshot_time and instead add cmd_time_snapshot
that serves all commands and is reset only when execution nesting starts.
* remove code to propagate CLIENT_FORCE_REPL from the executed command
to the script caller since scripts aren't propagated anyway these days and anyway
this flag wouldn't have had an effect since CLIENT_PREVENT_PROP is added by scriptResetRun.
* fix a module GIL violation issue in afterSleep that was introduced in #10300 (unreleased)
The issue was that setting maxmemory to used_memory and expecting
eviction is insufficient, since we need to take
mem_not_counted_for_evict into consideration.
This test got broken by #9166
The External tests started failing recently for unclear reason:
```
*** [err]: Tracking invalidation message of eviction keys should be before response in tests/unit/tracking.tcl
Expected '0' to be equal to 'invalidate volatile-key' (context: type eval line 21 cmd {assert_equal $res {invalidate volatile-key}} proc ::test)
```
I suspect the issue is that the used_memory sample is taken while a lazy free is still being processed.
Tracking invalidation messages were sometimes sent in inconsistent order,
before the command's reply rather than after.
In addition to that, they were sometimes embedded inside other commands
responses, like MULTI-EXEC and MGET.
The `Tracking gets notification of expired keys` test in tracking.tcl
used to hung in valgrind CI quite a lot.
It turns out the reason is that with valgrind and a busy machine, the
server cron active expire cycle could easily run in the same event loop
as the command that created `mykey`, so that when they key got expired,
there were two change events to broadcast, one that set the key and one
that expired it, but since we used raxTryInsert, the client that was
associated with the "last" change was the one that created the key, so
the NOLOOP filtered that event.
This commit adds a test that reproduces the problem by using lazy expire
in a multi-exec which makes sure the key expires in the same event loop
as the one that added it.
This commit revives the improves the ability to run the test suite against
external servers, instead of launching and managing `redis-server` processes as
part of the test fixture.
This capability existed in the past, using the `--host` and `--port` options.
However, it was quite limited and mostly useful when running a specific tests.
Attempting to run larger chunks of the test suite experienced many issues:
* Many tests depend on being able to start and control `redis-server` themselves,
and there's no clear distinction between external server compatible and other
tests.
* Cluster mode is not supported (resulting with `CROSSSLOT` errors).
This PR cleans up many things and makes it possible to run the entire test suite
against an external server. It also provides more fine grained controls to
handle cases where the external server supports a subset of the Redis commands,
limited number of databases, cluster mode, etc.
The tests directory now contains a `README.md` file that describes how this
works.
This commit also includes additional cleanups and fixes:
* Tests can now be tagged.
* Tag-based selection is now unified across `start_server`, `tags` and `test`.
* More information is provided about skipped or ignored tests.
* Repeated patterns in tests have been extracted to common procedures, both at a
global level and on a per-test file basis.
* Cleaned up some cases where test setup was based on a previous test executing
(a major anti-pattern that repeats itself in many places).
* Cleaned up some cases where test teardown was not part of a test (in the
future we should have dedicated teardown code that executes even when tests
fail).
* Fixed some tests that were flaky running on external servers.
When redis responds with tracking-redir-broken push message (RESP3),
it was responding with a broken protocol: an array of 3 elements, but only
pushes 2 elements.
Some bugs in the test make this pass. Read the push reply
will consume an extra reply, because the reply length is 3, but there
are only two elements, so the next reply will be treated as third
element. So the test is corrected too.
Other changes:
* checkPrefixCollisionsOrReply success should return 1 instead of -1,
this bug didn't have any implications.
* improve client tracking tests to validate more of the response it reads.
This adds basic coverage to IO threads by running the cluster and few selected Redis test suite tests with the IO threads enabled.
Also provides some necessary additional improvements to the test suite:
* Add --config to sentinel/cluster tests for arbitrary configuration.
* Fix --tags whitelisting which was broken.
* Add a `network` tag to some tests that are more network intensive. This is work in progress and more tests should be properly tagged in the future.
When a Lua script returns a map to redis (a feature which was added in
redis 6 together with RESP3), it would have returned the value first and
the key second.
If the client was using RESP2, it was getting them out of order, and if
the client was in RESP3, it was getting a map of value => key.
This was happening regardless of the Lua script using redis.setresp(3)
or not.
This also affects a case where the script was returning a map which it got
from from redis by doing something like: redis.setresp(3); return redis.call()
This fix is a breaking change for redis 6.0 users who happened to rely
on the wrong order (either ones that used redis.setresp(3), or ones that
returned a map explicitly).
This commit also includes other two changes in the tests:
1. The test suite now handles RESP3 maps as dicts rather than nested
lists
2. Remove some redundant (duplicate) tests from tracking.tcl
Test support for the new map, null and push message types. Map objects are parsed as a list of lists of key value pairs.
for instance: user => john password => 123
will be parsed to the following TCL list:
{{user john} {password 123}}
Also added the following tests:
Redirection still works with RESP3
Able to use a RESP3 client as a redirection client
No duplicate invalidation messages when turning BCAST mode on after normal tracking
Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort
Different clients using different protocols can track the same key
OPTOUT tests
OPTIN tests
Clients can redirect to the same connection
tracking-redir-broken test
HELLO 3 checks
Invalidation messages still work when using RESP3, with and without redirection
Switching to RESP3 doesn't disturb previous tracked keys
Tracking info is correct
Flushall and flushdb produce invalidation messages
These tests achieve 100% line coverage for tracking.c using lcov.
PROBLEM:
[$rd1 read] reads invalidation messages one by one, so it's never going to see the second invalidation message produced after INCR b, whether or not it exists. Adding another read will block incase no invalidation message is produced.
FIX:
We switch the order of "INCR a" and "INCR b" - now "INCR b" comes first. We still only read the first invalidation message produces. If an invalidation message is wrongly produces for b - then it will be produced before that of a, since "INCR b" comes before "INCR a".
Co-authored-by: Nitai Caro <caronita@amazon.com>