For zsets that will eventually be stored as the skiplist encoding (has a dict),
we can convert it to skiplist ahead of time. This change checks the number
of arguments in the ZADD command, and converts the data-structure
if the number of new entries exceeds the listpack-max-entries configuration.
This can cause us to over-allocate memory if there are duplicate entries in the
input, which is unexpected.
For ZRANGESTORE, we know the size of the zset, so we can expand
the dict in advance, to avoid the temporary dict from being rehashed
while it grows.
Simple benchmarks shows it provides some 4% improvement in ZADD and 20% in ZRANGESTORE
Minor test case addition for DECR and DECRBY.
Currently DECR and DECRBY do not have test case coverage for the
scenarios where they run on a non-existing key.
Minor test case addition.
Currently GETRANGE command does not have the test case coverage for the scenarios:
An error is returned when key exists but of different type
Added missing test cases for getrange command.
There is are some missing test cases for SUBSTR command.
These might already be covered by GETRANGE, but no harm in adding them since they're simple.
Added 3 test case.
* start > stop
* start and stop both greater than string length
* when no key is present.
Currently LINSERT command does not have the test case coverage for following scenarios.
1. When key does not exist, it is considered an empty list and no operation is performed.
2. An error is returned when key exists but does not hold a list value.
Added above two missing test cases for linsert command.
We do have ZREMRANGEBYLEX tests, but it is a stress test
marked with slow tag and then skipped in reply-schemas daily.
In the past, we were able to succeed on a daily, i guess
it was because there were some random command executions,
such as corrupt-dump-fuzzy, which might call it.
These test examples are taken from ZRANGEBYLEX basics test.
Work in progress towards implementing a reply schema as part of COMMAND DOCS, see #9845
Since ironing the details of the reply schema of each and every command can take a long time, we
would like to merge this PR when the infrastructure is ready, and let this mature in the unstable branch.
Meanwhile the changes of this PR are internal, they are part of the repo, but do not affect the produced build.
### Background
In #9656 we add a lot of information about Redis commands, but we are missing information about the replies
### Motivation
1. Documentation. This is the primary goal.
2. It should be possible, based on the output of COMMAND, to be able to generate client code in typed
languages. In order to do that, we need Redis to tell us, in detail, what each reply looks like.
3. We would like to build a fuzzer that verifies the reply structure (for now we use the existing
testsuite, see the "Testing" section)
### Schema
The idea is to supply some sort of schema for the various replies of each command.
The schema will describe the conceptual structure of the reply (for generated clients), as defined in RESP3.
Note that the reply structure itself may change, depending on the arguments (e.g. `XINFO STREAM`, with
and without the `FULL` modifier)
We decided to use the standard json-schema (see https://json-schema.org/) as the reply-schema.
Example for `BZPOPMIN`:
```
"reply_schema": {
"oneOf": [
{
"description": "Timeout reached and no elements were popped.",
"type": "null"
},
{
"description": "The keyname, popped member, and its score.",
"type": "array",
"minItems": 3,
"maxItems": 3,
"items": [
{
"description": "Keyname",
"type": "string"
},
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
]
}
```
#### Notes
1. It is ok that some commands' reply structure depends on the arguments and it's the caller's responsibility
to know which is the relevant one. this comes after looking at other request-reply systems like OpenAPI,
where the reply schema can also be oneOf and the caller is responsible to know which schema is the relevant one.
2. The reply schemas will describe RESP3 replies only. even though RESP3 is structured, we want to use reply
schema for documentation (and possibly to create a fuzzer that validates the replies)
3. For documentation, the description field will include an explanation of the scenario in which the reply is sent,
including any relation to arguments. for example, for `ZRANGE`'s two schemas we will need to state that one
is with `WITHSCORES` and the other is without.
4. For documentation, there will be another optional field "notes" in which we will add a short description of
the representation in RESP2, in case it's not trivial (RESP3's `ZRANGE`'s nested array vs. RESP2's flat
array, for example)
Given the above:
1. We can generate the "return" section of all commands in [redis-doc](https://redis.io/commands/)
(given that "description" and "notes" are comprehensive enough)
2. We can generate a client in a strongly typed language (but the return type could be a conceptual
`union` and the caller needs to know which schema is relevant). see the section below for RESP2 support.
3. We can create a fuzzer for RESP3.
### Limitations (because we are using the standard json-schema)
The problem is that Redis' replies are more diverse than what the json format allows. This means that,
when we convert the reply to a json (in order to validate the schema against it), we lose information (see
the "Testing" section below).
The other option would have been to extend the standard json-schema (and json format) to include stuff
like sets, bulk-strings, error-string, etc. but that would mean also extending the schema-validator - and that
seemed like too much work, so we decided to compromise.
Examples:
1. We cannot tell the difference between an "array" and a "set"
2. We cannot tell the difference between simple-string and bulk-string
3. we cannot verify true uniqueness of items in commands like ZRANGE: json-schema doesn't cover the
case of two identical members with different scores (e.g. `[["m1",6],["m1",7]]`) because `uniqueItems`
compares (member,score) tuples and not just the member name.
### Testing
This commit includes some changes inside Redis in order to verify the schemas (existing and future ones)
are indeed correct (i.e. describe the actual response of Redis).
To do that, we added a debugging feature to Redis that causes it to produce a log of all the commands
it executed and their replies.
For that, Redis needs to be compiled with `-DLOG_REQ_RES` and run with
`--reg-res-logfile <file> --client-default-resp 3` (the testsuite already does that if you run it with
`--log-req-res --force-resp3`)
You should run the testsuite with the above args (and `--dont-clean`) in order to make Redis generate
`.reqres` files (same dir as the `stdout` files) which contain request-response pairs.
These files are later on processed by `./utils/req-res-log-validator.py` which does:
1. Goes over req-res files, generated by redis-servers, spawned by the testsuite (see logreqres.c)
2. For each request-response pair, it validates the response against the request's reply_schema
(obtained from the extended COMMAND DOCS)
5. In order to get good coverage of the Redis commands, and all their different replies, we chose to use
the existing redis test suite, rather than attempt to write a fuzzer.
#### Notes about RESP2
1. We will not be able to use the testing tool to verify RESP2 replies (we are ok with that, it's time to
accept RESP3 as the future RESP)
2. Since the majority of the test suite is using RESP2, and we want the server to reply with RESP3
so that we can validate it, we will need to know how to convert the actual reply to the one expected.
- number and boolean are always strings in RESP2 so the conversion is easy
- objects (maps) are always a flat array in RESP2
- others (nested array in RESP3's `ZRANGE` and others) will need some special per-command
handling (so the client will not be totally auto-generated)
Example for ZRANGE:
```
"reply_schema": {
"anyOf": [
{
"description": "A list of member elements",
"type": "array",
"uniqueItems": true,
"items": {
"type": "string"
}
},
{
"description": "Members and their scores. Returned in case `WITHSCORES` was used.",
"notes": "In RESP2 this is returned as a flat array",
"type": "array",
"uniqueItems": true,
"items": {
"type": "array",
"minItems": 2,
"maxItems": 2,
"items": [
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
}
]
}
```
### Other changes
1. Some tests that behave differently depending on the RESP are now being tested for both RESP,
regardless of the special log-req-res mode ("Pub/Sub PING" for example)
2. Update the history field of CLIENT LIST
3. Added basic tests for commands that were not covered at all by the testsuite
### TODO
- [x] (maybe a different PR) add a "condition" field to anyOf/oneOf schemas that refers to args. e.g.
when `SET` return NULL, the condition is `arguments.get||arguments.condition`, for `OK` the condition
is `!arguments.get`, and for `string` the condition is `arguments.get` - https://github.com/redis/redis/issues/11896
- [x] (maybe a different PR) also run `runtest-cluster` in the req-res logging mode
- [x] add the new tests to GH actions (i.e. compile with `-DLOG_REQ_RES`, run the tests, and run the validator)
- [x] (maybe a different PR) figure out a way to warn about (sub)schemas that are uncovered by the output
of the tests - https://github.com/redis/redis/issues/11897
- [x] (probably a separate PR) add all missing schemas
- [x] check why "SDOWN is triggered by misconfigured instance replying with errors" fails with --log-req-res
- [x] move the response transformers to their own file (run both regular, cluster, and sentinel tests - need to
fight with the tcl including mechanism a bit)
- [x] issue: module API - https://github.com/redis/redis/issues/11898
- [x] (probably a separate PR): improve schemas: add `required` to `object`s - https://github.com/redis/redis/issues/11899
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
Co-authored-by: Hanna Fadida <hanna.fadida@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Shaya Potter <shaya@redislabs.com>
Test `trim on SET with big value` (introduced from #11817) fails under mac m1 with libc mem_allocator.
The reason is that malloc(33000) will allocate 65536 bytes(>42000).
This test still passes under ubuntu with libc mem_allocator.
```
*** [err]: trim on SET with big value in tests/unit/type/string.tcl
Expected [r memory usage key] < 42000 (context: type source line 471 file /Users/iospack/data/redis_fork/tests/unit/type/string.tcl cmd {assert {[r memory usage key] < 42000}} proc ::test)
```
simple test under mac m1 with libc mem_allocator:
```c
void *p = zmalloc(33000);
printf("malloc size: %zu\n", zmalloc_size(p));
# output
malloc size: 65536
```
In #9373, actually need to replace `$rd $pop blist1{t} blist2{t} 1`
with `bpop_command_two_key $rd $pop blist1{t} blist2{t} 1` but forgot
to delete the latter.
This doesn't affect the test, because the later assert_error "WRONGTYPE"
is expected (and right). And if we read $rd again, it will get the
wrong result, like 'ERR unknown command 'BLMPOP_LEFT' | 'BLMPOP_RIGHT'
All of the POP commands must not decr length below 0.
So, get_fsl will delete the key if the length is 0 (unless
the caller wished to create if doesn't exist)
Other:
1. Use REDISMODULE_WRITE where needed (POP commands)
2. Use wait_for_blokced_clients in test
Unrelated:
Use quotes instead of curly braces in zset.tcl, for variable expansion
In #7875 (Redis 6.2), we changed the sds alloc to be the usable allocation
size in order to:
> reduce the need for realloc calls by making the sds implicitly take over
the internal fragmentation
This change was done most sds functions, excluding `sdsRemoveFreeSpace` and
`sdsResize`, the reason is that in some places (e.g. clientsCronResizeQueryBuffer)
we call sdsRemoveFreeSpace when we see excessive free space and want to trim it.
so if we don't trim it exactly to size, the caller may still see excessive free space and
call it again and again.
However, this resulted in some excessive calls to realloc, even when there's no need
and it's gonna be a no-op (e.g. when reducing 15 bytes allocation to 13).
It turns out that a call for realloc with jemalloc can be expensive even if it ends up
doing nothing, so this PR adds a check using `je_nallocx`, which is cheap to avoid
the call for realloc.
in addition to that this PR unifies sdsResize and sdsRemoveFreeSpace into common
code. the difference between them was that sdsResize would avoid using SDS_TYPE_5,
since it want to keep the string ready to be resized again, while sdsRemoveFreeSpace
would permit using SDS_TYPE_5 and get an optimal memory consumption.
now both methods take a `would_regrow` argument that makes it more explicit.
the only actual impact of that is that in clientsCronResizeQueryBuffer we call both sdsResize
and sdsRemoveFreeSpace for in different cases, and we now prevent the use of SDS_TYPE_5 in both.
The new test that was added to cover this concern used to pass before this PR as well,
this PR is just a performance optimization and cleanup.
Benchmark:
`redis-benchmark -c 100 -t set -d 512 -P 10 -n 100000000`
on i7-9850H with jemalloc, shows improvement from 1021k ops/sec to 1067k (average of 3 runs).
some 4.5% improvement.
Co-authored-by: Oran Agra <oran@redislabs.com>
Authenticated users issuing specially crafted SETRANGE and SORT(_RO)
commands can trigger an integer overflow, resulting with Redis attempting
to allocate impossible amounts of memory and abort with an OOM panic.
Any value in the range of [0-1) turns to 0 when being cast from double to long long. This change rounds up instead of down for values that can't be stored precisely as long doubles.
*TL;DR*
---------------------------------------
Following the discussion over the issue [#7551](https://github.com/redis/redis/issues/7551)
We decided to refactor the client blocking code to eliminate some of the code duplications
and to rebuild the infrastructure better for future key blocking cases.
*In this PR*
---------------------------------------
1. reprocess the command once a client becomes unblocked on key (instead of running
custom code for the unblocked path that's different than the one that would have run if
blocking wasn't needed)
2. eliminate some (now) irrelevant code for handling unblocking lists/zsets/streams etc...
3. modify some tests to intercept the error in cases of error on reprocess after unblock (see
details in the notes section below)
4. replace '$' on the client argv with current stream id. Since once we reprocess the stream
XREAD we need to read from the last msg and not wait for new msg in order to prevent
endless block loop.
5. Added statistics to the info "Clients" section to report the:
* `total_blocking_keys` - number of blocking keys
* `total_blocking_keys_on_nokey` - number of blocking keys which have at least 1 client
which would like
to be unblocked on when the key is deleted.
6. Avoid expiring unblocked key during unblock. Previously we used to lookup the unblocked key
which might have been expired during the lookup. Now we lookup the key using NOTOUCH and
NOEXPIRE to avoid deleting it at this point, so propagating commands in blocked.c is no longer needed.
7. deprecated command flags. We decided to remove the CMD_CALL_STATS and CMD_CALL_SLOWLOG
and make an explicit verification in the call() function in order to decide if stats update should take place.
This should simplify the logic and also mitigate existing issues: for example module calls which are
triggered as part of AOF loading might still report stats even though they are called during AOF loading.
*Behavior changes*
---------------------------------------------------
1. As this implementation prevents writing dedicated code handling unblocked streams/lists/zsets,
since we now re-process the command once the client is unblocked some errors will be reported differently.
The old implementation used to issue
``UNBLOCKED the stream key no longer exists``
in the following cases:
- The stream key has been deleted (ie. calling DEL)
- The stream and group existed but the key type was changed by overriding it (ie. with set command)
- The key not longer exists after we swapdb with a db which does not contains this key
- After swapdb when the new db has this key but with different type.
In the new implementation the reported errors will be the same as if the command was processed after effect:
**NOGROUP** - in case key no longer exists, or **WRONGTYPE** in case the key was overridden with a different type.
2. Reprocessing the command means that some checks will be reevaluated once the
client is unblocked.
For example, ACL rules might change since the command originally was executed and
will fail once the client is unblocked.
Another example is OOM condition checks which might enable the command to run and
block but fail the command reprocess once the client is unblocked.
3. One of the changes in this PR is that no command stats are being updated once the
command is blocked (all stats will be updated once the client is unblocked). This implies
that when we have many clients blocked, users will no longer be able to get that information
from the command stats. However the information can still be gathered from the client list.
**Client blocking**
---------------------------------------------------
the blocking on key will still be triggered the same way as it is done today.
in order to block the current client on list of keys, the call to
blockForKeys will still need to be made which will perform the same as it is today:
* add the client to the list of blocked clients on each key
* keep the key with a matching list node (position in the global blocking clients list for that key)
in the client private blocking key dict.
* flag the client with CLIENT_BLOCKED
* update blocking statistics
* register the client on the timeout table
**Key Unblock**
---------------------------------------------------
Unblocking a specific key will be triggered (same as today) by calling signalKeyAsReady.
the implementation in that part will stay the same as today - adding the key to the global readyList.
The reason to maintain the readyList (as apposed to iterating over all clients blocked on the specific key)
is in order to keep the signal operation as short as possible, since it is called during the command processing.
The main change is that instead of going through a dedicated code path that operates the blocked command
we will just call processPendingCommandsAndResetClient.
**ClientUnblock (keys)**
---------------------------------------------------
1. Unblocking clients on keys will be triggered after command is
processed and during the beforeSleep
8. the general schema is:
9. For each key *k* in the readyList:
```
For each client *c* which is blocked on *k*:
in case either:
1. *k* exists AND the *k* type matches the current client blocking type
OR
2. *k* exists and *c* is blocked on module command
OR
3. *k* does not exists and *c* was blocked with the flag
unblock_on_deleted_key
do:
1. remove the client from the list of clients blocked on this key
2. remove the blocking list node from the client blocking key dict
3. remove the client from the timeout list
10. queue the client on the unblocked_clients list
11. *NEW*: call processCommandAndResetClient(c);
```
*NOTE:* for module blocked clients we will still call the moduleUnblockClientByHandle
which will queue the client for processing in moduleUnblockedClients list.
**Process Unblocked clients**
---------------------------------------------------
The process of all unblocked clients is done in the beforeSleep and no change is planned
in that part.
The general schema will be:
For each client *c* in server.unblocked_clients:
* remove client from the server.unblocked_clients
* set back the client readHandler
* continue processing the pending command and input buffer.
*Some notes regarding the new implementation*
---------------------------------------------------
1. Although it was proposed, it is currently difficult to remove the
read handler from the client while it is blocked.
The reason is that a blocked client should be unblocked when it is
disconnected, or we might consume data into void.
2. While this PR mainly keep the current blocking logic as-is, there
might be some future additions to the infrastructure that we would
like to have:
- allow non-preemptive blocking of client - sometimes we can think
that a new kind of blocking can be expected to not be preempt. for
example lets imagine we hold some keys on disk and when a command
needs to process them it will block until the keys are uploaded.
in this case we will want the client to not disconnect or be
unblocked until the process is completed (remove the client read
handler, prevent client timeout, disable unblock via debug command etc...).
- allow generic blocking based on command declared keys - we might
want to add a hook before command processing to check if any of the
declared keys require the command to block. this way it would be
easier to add new kinds of key-based blocking mechanisms.
Co-authored-by: Oran Agra <oran@redislabs.com>
Signed-off-by: Ran Shidlansik <ranshid@amazon.com>
I've seen the `BRPOPLPUSH with multiple blocked clients` test hang.
this probably happened because rd2 blocked before rd1 and then it was
also released first, and rd1 remained blocked.
```
r del blist{t} target1{t} target2{t}
r set target1{t} nolist
$rd1 brpoplpush blist{t} target1{t} 0
$rd2 brpoplpush blist{t} target2{t} 0
r lpush blist{t} foo
assert_error "WRONGTYPE*" {$rd1 read}
assert_equal {foo} [$rd2 read]
assert_equal {foo} [r lrange target2{t} 0 -1]
```
changes:
* added all missing calls for wait_for_blocked_client after issuing blocking commands)
* removed some excessive `after 100`
* fix undetected crossslot error in BRPOPLPUSH test
* rollback changes to proto-max-bulk-len so external tests can be rerun
In #11290, we added listpack encoding for SET object.
But forgot to support it in zuiFind, causes ZINTER, ZINTERSTORE,
ZINTERCARD, ZIDFF, ZDIFFSTORE to crash.
And forgot to support it in RM_ScanKey, causes it hang.
This PR add support SET listpack in zuiFind, and in RM_ScanKey.
And add tests for related commands to cover this case.
Other changes:
- There is no reason for zuiFind to go into the internals of the SET.
It can simply use setTypeIsMember and don't care about encoding.
- Remove the `#include "intset.h"` from server.h reduce the chance of
accidental intset API use.
- Move setTypeAddAux, setTypeRemoveAux and setTypeIsMemberAux
interfaces to the header.
- In scanGenericCommand, use setTypeInitIterator and setTypeNext
to handle OBJ_SET scan.
- In RM_ScanKey, improve hash scan mode, use lpGetValue like zset,
they can share code and better performance.
The zuiFind part fixes#11578
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
The test failed with ERR DUMP payload version or checksum are wrong.
And it only fails on CentOS, this is due to the fact that tcl8.5 does not correctly
parse the hexadecimal abbreviation. And in Ubuntu we are using tcl8.6.
1. "Fixed" the current code so that seen-time/idle actually refers to interaction
attempts (as documented; breaking change)
2. Added active-time/inactive to refer to successful interaction (what
seen-time/idle used to be)
At first, I tried to avoid changing the behavior of seen-time/idle but then realized
that, in this case, the odds are the people read the docs and implemented their
code based on the docs (which didn't match the behavior).
For the most part, that would work fine, except that issue #9996 was found.
I was working under the assumption that people relied on the docs, and for
the most part, it could have worked well enough. so instead of fixing the docs,
as I would usually do, I fixed the code to match the docs in this particular case.
Note that, in case the consumer has never read any entries, the values
for both "active-time" (XINFO FULL) and "inactive" (XINFO CONSUMERS) will
be -1, meaning here that the consumer was never active.
Note that seen/active time is only affected by XREADGROUP / X[AUTO]CLAIM, not
by XPENDING, XINFO, and other "read-only" stream CG commands (always has been,
even before this PR)
Other changes:
* Another behavioral change (arguably a bugfix) is that XREADGROUP and X[AUTO]CLAIM
create the consumer regardless of whether it was able to perform some reading/claiming
* RDB format change to save the `active_time`, and set it to the same value of `seen_time` in old rdb files.
Add an option "withscores" to ZRANK and ZREVRANK.
Add `[withscore]` option to both `zrank` and `zrevrank`, like this:
```
z[rev]rank key member [withscore]
```
This PR add `assert_refcount_morethan`, and modify `assert_refcount` to skip
the `OBJECT REFCOUNT` check with `needs:debug` flag. Use them to modify all
`OBJECT REFCOUNT` calls and also update the tests/README to be more specific.
The reasoning is that some of these tests could be testing something important,
and along the way also add a check for the refcount, and it could be a shame to skip
the whole test just because the refcount functionality is missing or blocked.
but much like the fact that some redis variants may not support DEBUG,
and still we want to run the majority of the test for coverage, and just skip the digest match.
Improve memory efficiency of list keys
## Description of the feature
The new listpack encoding uses the old `list-max-listpack-size` config
to perform the conversion, which we can think it of as a node inside a
quicklist, but without 80 bytes overhead (internal fragmentation included)
of quicklist and quicklistNode structs.
For example, a list key with 5 items of 10 chars each, now takes 128 bytes
instead of 208 it used to take.
## Conversion rules
* Convert listpack to quicklist
When the listpack length or size reaches the `list-max-listpack-size` limit,
it will be converted to a quicklist.
* Convert quicklist to listpack
When a quicklist has only one node, and its length or size is reduced to half
of the `list-max-listpack-size` limit, it will be converted to a listpack.
This is done to avoid frequent conversions when we add or remove at the bounding size or length.
## Interface changes
1. add list entry param to listTypeSetIteratorDirection
When list encoding is listpack, `listTypeIterator->lpi` points to the next entry of current entry,
so when changing the direction, we need to use the current node (listTypeEntry->p) to
update `listTypeIterator->lpi` to the next node in the reverse direction.
## Benchmark
### Listpack VS Quicklist with one node
* LPUSH - roughly 0.3% improvement
* LRANGE - roughly 13% improvement
### Both are quicklist
* LRANGE - roughly 3% improvement
* LRANGE without pipeline - roughly 3% improvement
From the benchmark, as we can see from the results
1. When list is quicklist encoding, LRANGE improves performance by <5%.
2. When list is listpack encoding, LRANGE improves performance by ~13%,
the main enhancement is brought by `addListListpackRangeReply()`.
## Memory usage
1M lists(key:0~key:1000000) with 5 items of 10 chars ("hellohello") each.
shows memory usage down by 35.49%, from 214MB to 138MB.
## Note
1. Add conversion callback to support doing some work before conversion
Since the quicklist iterator decompresses the current node when it is released, we can
no longer decompress the quicklist after we convert the list.
Small sets with not only integer elements are listpack encoded, by default
up to 128 elements, max 64 bytes per element, new config `set-max-listpack-entries`
and `set-max-listpack-value`. This saves memory for small sets compared to using a hashtable.
Sets with only integers, even very small sets, are still intset encoded (up to 1G
limit, etc.). Larger sets are hashtable encoded.
This PR increments the RDB version, and has an effect on OBJECT ENCODING
Possible conversions when elements are added:
intset -> listpack
listpack -> hashtable
intset -> hashtable
Note: No conversion happens when elements are deleted. If all elements are
deleted and then added again, the set is deleted and recreated, thus implicitly
converted to a smaller encoding.
Resolve an edge case where the ID of a stream is updated retroactively
to an ID lower than the already set max_deleted_entry_id.
Currently, if we have command as below:
**xsetid mystream 1-1 MAXDELETEDID 1-2**
Then we will get the following error:
**(error) ERR The ID specified in XSETID is smaller than the provided max_deleted_entry_id**
Becuase the provided MAXDELETEDID 1-2 is greated than input last-id: 1-1
Then we could assume there is a similar situation:
step 1: we add three items in the mystream
**127.0.0.1:6381> xadd mystream 1-1 a 1
"1-1"
127.0.0.1:6381> xadd mystream 1-2 b 2
"1-2"
127.0.0.1:6381> xadd mystream 1-3 c 3
"1-3"**
step 2: we could check the mystream infomation as below:
**127.0.0.1:6381> xinfo stream mystream
1) "length"
2) (integer) 3
7) "last-generated-id"
8) "1-3"
9) "max-deleted-entry-id"
10) "0-0"
step 3: we delete the item id 1-2 and 1-3 as below:
**127.0.0.1:6381> xdel mystream 1-2
(integer) 1
127.0.0.1:6381> xdel mystream 1-3
(integer) 1**
step 4: we check the mystream information:
127.0.0.1:6381> xinfo stream mystream
1) "length"
2) (integer) 1
7) "last-generated-id"
8) "1-3"
9) "max-deleted-entry-id"
10) "1-3"
we could notice that the **max-deleted-entry-id update to 1-3**, so right now, if we just run:
**xsetid mystream 1-2**
the above command has the same effect with **xsetid mystream 1-2 MAXDELETEDID 1-3**
So we should return an error to the client that **(error) ERR The ID specified in XSETID is smaller than current max_deleted_entry_id**
This is a rare failure mode of a new feature of redis 7 introduced in #9217
(when the incremental part of the ID overflows).
Till now, the outcome of that error was undetermined (could easily result in
`Elements are too large to be stored` wrongly, due to unset `errno`).
All commands / use cases that heavily rely on double to a string representation conversion,
(e.g. meaning take a double-precision floating-point number like 1.5 and return a string like "1.5" ),
could benefit from a performance boost by swapping snprintf(buf,len,"%.17g",value) by the
equivalent [fpconv_dtoa](https://github.com/night-shift/fpconv) or any other algorithm that ensures
100% coverage of conversion.
This is a well-studied topic and Projects like MongoDB. RedPanda, PyTorch leverage libraries
( fmtlib ) that use the optimized double to string conversion underneath.
The positive impact can be substantial. This PR uses the grisu2 approach ( grisu explained on
https://www.cs.tufts.edu/~nr/cs257/archive/florian-loitsch/printf.pdf section 5 ).
test suite changes:
Despite being compatible, in some cases it produces a different result from printf, and some tests
had to be adjusted.
one case is that `%.17g` (which means %e or %f which ever is shorter), chose to use `5000000000`
instead of 5e+9, which sounds like a bug?
In other cases, we changed TCL to compare numbers instead of strings to ignore minor rounding
issues (`expr 0.8 == 0.79999999999999999`)
Refine getTimeoutFromObjectOrReply() out-of-range check.
Timeout is parsed (and verifies out of range) as double and
multiplied by 1000, added mstime() and stored in long-long
which might lead to out-of-range value of long-long.
Co-authored-by: moticless <moticless@github.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
Mainly fix two minor bug
1. When handle BL*POP/BLMOVE commands with blocked clients, we should increment server.dirty.
2. `listPopRangeAndReplyWithKey()` in `serveClientBlockedOnList()` should not repeat calling
`signalModifiedKey()` which has been called when an element was pushed on the list.
(was skipped in all bpop commands, other than blmpop)
Other optimization
add `signal` param for `listElementsRemoved` to skip `signalModifiedKey()` to unify all pop operation.
Unifying all pop operations also prepares us for #11303, so that we can avoid having to deal with the
conversion from quicklist to listpack() in various places when the list shrinks.
Executing an XAUTOCLAIM command on a stream key in a specific state, with a
specially crafted COUNT argument may cause an integer overflow, a subsequent
heap overflow, and potentially lead to remote code execution.
The problem affects Redis versions 7.0.0 or newer.
This PR mainly deals with 2 crashes introduced in #9357,
and fix the QUICKLIST-PACKED-THRESHOLD mess in external test mode.
1. Fix crash due to deleting an entry from a compress quicklistNode
When inserting a large element, we need to create a new quicklistNode first,
and then delete its previous element, if the node where the deleted element is
located is compressed, it will cause a crash.
Now add `dont_compress` to quicklistNode, if we want to use a quicklistNode
after some operation, we can use this flag like following:
```c
node->dont_compress = 1; /* Prevent to be compressed */
some_operation(node); /* This operation might try to compress this node */
some_other_operation(node); /* We can use this node without decompress it */
node->dont_compress = 0; /* Re-able compression */
quicklistCompressNode(node);
```
Perhaps in the future, we could just disable the current entry from being
compressed during the iterator loop, but that would require more work.
2. Fix crash due to wrongly split quicklist
before #9357, the offset param of _quicklistSplitNode() will not negative.
For now, when offset is negative, the split extent will be wrong.
following example:
```c
int orig_start = after ? offset + 1 : 0;
int orig_extent = after ? -1 : offset;
int new_start = after ? 0 : offset;
int new_extent = after ? offset + 1 : -1;
# offset: -2, after: 1, node->count: 2
# current wrong range: [-1,-1] [0,-1]
# correct range: [1,-1] [0, 1]
```
Because only `_quicklistInsert()` splits the quicklistNode and only
`quicklistInsertAfter()`, `quicklistInsertBefore()` call _quicklistInsert(),
so `quicklistReplaceEntry()` and `listTypeInsert()` might occur this crash.
But the iterator of `listTypeInsert()` is alway from head to tail(iter->offset is
always positive), so it is not affected.
The final conclusion is this crash only occur when we insert a large element
with negative index into a list, that affects `LSET` command and `RM_ListSet`
module api.
3. In external test mode, we need to restore quicklist packed threshold after
when the end of test.
4. Show `node->count` in quicklistRepr().
5. Add new tcl proc `config_get_set` to support restoring config in tests.
Check the validity of the value before performing the create operation,
prevents new data from being generated even if the request fails to execute.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: chendianqiang <chendianqiang@meituan.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
This PR includes 2 missed test cases of XDEL and XGROUP CREATE command
1. one test case: XDEL delete multiply id once
2. 3 test cases: XGROUP CREATE has ENTRIESREAD parameter,
which equal 0 (special positive number), 3 and negative value.
Co-authored-by: Ubuntu <lucas.guang.yang1@huawei.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
The temporary array for deleted entries reply of XAUTOCLAIM was
insufficient, but also in fact the COUNT argument should be used to
control the size of the reply, so instead of terminating the loop by
only counting the claimed entries, we'll count deleted entries as well.
Fix#10968
Addresses CVE-2022-31144
when we know the size of the zset we're gonna store in advance,
we can check if it's greater than the listpack encoding threshold,
in which case we can create a skiplist from the get go, and avoid
converting the listpack to skiplist later after it was already populated.
When `zrangestore` is called container destination object is created.
Before this PR we used to create a listpack based object even if `zset-max-ziplist-entries`
or equivalent`zset-max-listpack-entries` was set to 0.
This triggered immediate conversion of the listpack into a skiplist in `zrangestore`, which hits
an assertion resulting in an engine crash.
Added a TCL test that reproduces this issue.
This bug was introduced in #9484 (7.0.0).
It result that BZMPOP blocked on non-key arguments.
Like `bzmpop 0 1 myzset min count 10`, this command will additionally
block in these keys (except for the first and the last argument) and can return their values:
- 0: timeout value
- 1: numkeys value
- min: min/max token
- count: count token
Updated the comments for:
info command
lmpopCommand and blmpopCommand
sinterGenericCommand
Fix the missing "key" words in the srandmemberCommand function
For LPOS command, when rank is 0, prompt user that rank could be
positive number or negative number, and add a test for it
When user uses the same input key for SDIFF as the first one, the result must be empty, so we don't need to process the elements to test.
This method is like the one done in zset‘s `zsetChooseDiffAlgorithm`
Co-authored-by: Oran Agra <oran@redislabs.com>
