* Remove linux/version.h dependency.
This introduces unnecessary dependencies, and generally not a good idea
as the platform we build on may be different than the platform we run
on.
To determine if sync_file_range exists we can simply rely on header file
hints.
* Fix setproctitle() on libmusl.
The previous ifdef checks were a bit too strict for no apparent
reason.
* Fix tests failure on Linux with no backtrace.
* Add alpine daily CI job.
This validation was only done for sub-commands and not for commands.
These would have been valid (not produce any error)
ACL SETUSER bob +@all +client
ACL SETUSER bob +client +client
so no reason for this one to fail:
ACL SETUSER bob +client +client|id
One example why this is needed is that pfdebug wasn't part of the @hyperloglog
group and now it is. so something like:
acl setuser user1 +@hyperloglog +pfdebug|test
would have succeeded in early 6.0.x, and fail in 6.2 RC3
Co-authored-by: Harkrishn Patro <harkrisp@amazon.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
When redis responds with tracking-redir-broken push message (RESP3),
it was responding with a broken protocol: an array of 3 elements, but only
pushes 2 elements.
Some bugs in the test make this pass. Read the push reply
will consume an extra reply, because the reply length is 3, but there
are only two elements, so the next reply will be treated as third
element. So the test is corrected too.
Other changes:
* checkPrefixCollisionsOrReply success should return 1 instead of -1,
this bug didn't have any implications.
* improve client tracking tests to validate more of the response it reads.
Respond with error if expire time overflows from positive to negative of vice versa.
* `SETEX`, `SET EX`, `GETEX` etc would have already error on negative value,
but now they would also error on overflows (i.e. when the input was positive but
after the manipulation it becomes negative, which would have passed before)
* `EXPIRE` and `EXPIREAT` was ok taking negative values (would implicitly delete
the key), we keep that, but we do error if the user provided a value that changes
sign when manipulated (except the case of changing sign when `basetime` is added)
Signed-off-by: Gnanesh <gnaneshkunal@outlook.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
* Adding current_save_keys_total and current_save_keys_processed info fields.
Present in replication, BGSAVE and AOFRW.
* Changing RM_SendChildCOWInfo() to RM_SendChildHeartbeat(double progress)
* Adding new info field current_fork_perc. Present in Replication, BGSAVE, AOFRW,
and module forks.
There are two tests in other.tcl that were dependant of the sha1 package
import which meant that they didn't usually run.
The reason it was like that was that prior to the creation of DEBUG
DIGEST, the test suite used to have an equivalent function, but that's
no longer the case and this dependency isn't needed.
The other change is to revert config changes done by the test before the
test suite continues. can be useful if using `--host` to run multiple
units against the same server
The added flag affects the return value of RM_HashSet() to include
the number of inserted fields, in addition to updated and deleted
fields.
errno is set on errors, tests are added and documentation updated.
* Don't run test script on non-Linux.
* Verify that reported fds do indeed exist also in parent, to avoid
false negatives on some systems (namely CentOS).
Co-authored-by: Andy Pan <panjf2000@gmail.com>
- removes time sensitive checks from block on background tests during leak checks.
- fix uninitialized variable on RedisModuleBlockedClient() when calling
RM_BlockedClientMeasureTimeEnd() without RM_BlockedClientMeasureTimeStart()
1. Rename 18-cluster-nodes-slots.tcl to 19-cluster-nodes-slots.tcl.
it was conflicting with another test prefixed by 18
2. Release memory on exit in redis-cli.c.
3. Fix freeConvertedSds indentation.
* For consistency, use tclsh for the script as well
* Ignore leaked fds that originate from grandparent process, since we
only care about fds redis-sentinel itself is responsible for
* Check every test iteration to catch problems early
* Some cleanups, e.g. parameterization of file name, etc.
The test failed from time to time on Github actions.
We think it's possible that on the module's blocking timeout
time tracking test, the timeout is happening prior we issue the
RedisModule_BlockedClientMeasureTimeStart(bc) on the
background thread. If that is the case one possible solution
is to increase the timeout.
Increasing to 200ms to 500ms to see if nightly stops failing.
Without this fix, RM_ZsetRem can leave empty sorted sets which are
not allowed to exist.
Removing from a sorted set while iterating seems to work (while
inserting causes failed assetions). RM_ZsetRangeEndReached is
modified to return 1 if the key doesn't exist, to terminate
iteration when the last element has been removed.
Changes to HRANDFIELD and ZRANDMEMBER:
* Fix risk of OOM panic when client query a very big negative count (avoid allocating huge temporary buffer).
* Fix uneven random distribution in HRANDFIELD with negative count (wasn't using dictGetFairRandomKey).
* Add tests to check an even random distribution (HRANDFIELD, SRANDMEMBER, ZRANDMEMBER).
Co-authored-by: Oran Agra <oran@redislabs.com>
Fix errors of GEOSEARCH bybox search due to:
1. projection of the box to a trapezoid (when the meter box is converted to long / lat it's no longer a box).
2. width and height mismatch
Changes:
- New GEOSEARCH point in rectangle algorithm
- Fix GEOSEARCH bybox width and height mismatch bug
- Add GEOSEARCH bybox testing to the existing "GEOADD + GEORANGE randomized test"
- Add new fuzzy test to stress test the bybox corners and edges
- Add some tests for edge cases of the bybox algorithm
Co-authored-by: Oran Agra <oran@redislabs.com>
* Add bash temporarily to allow sentinel fd leaks test to run.
* Use vmactions-freebsd rdist sync to work around bind permission denied
and slow execution issues.
* Upgrade to tcl8.6 to be aligned with latest Ubuntu envs.
* Concat all command executions to avoid ignoring failures.
* Skip intensive fuzzer on FreeBSD. For some yet unknown reason, generate_fuzzy_traffic_on_key causes TCL to significantly bloat on FreeBSD resulting with out of memory.
* The corrupt dump fuzzer found a division by zero.
* in some cases the random fields from the HRANDFIELD tests produced
fields with newlines and other special chars (due to \ char), this caused
the TCL tests to see a bulk response that has a newline in it and add {}
around it, later it can think this is a nested list. in fact the `alpha` random
string generator isn't using spaces and newlines, so it should not use `\`
either.
This commit fixes sentinel announces hostnames test error in certain linux environment
Before this commit, we only check localhost is resolved into 127.0.0.1, however in ubuntu
or some other linux environments "localhost" will be resolved into ::1 ipv6 address first if
the network stack is capable.
This commit enables tracking time of the background tasks and on replies,
opening the door for properly tracking commands that rely on blocking / background
work via the slowlog, latency history, and commandstats.
Some notes:
- The time spent blocked waiting for key changes, or blocked on synchronous
replication is not accounted for.
- **This commit does not affect latency tracking of commands that are non-blocking
or do not have background work.** ( meaning that it all stays the same with exception to
`BZPOPMIN`,`BZPOPMAX`,`BRPOP`,`BLPOP`, etc... and module's commands that rely
on background threads ).
- Specifically for latency history command we've added a new event class named
`command-unblocking` that will enable latency monitoring on commands that spawn
background threads to do the work.
- For blocking commands we're now considering the total time of a command as the
time spent on call() + the time spent on replying when unblocked.
- For Modules commands that rely on background threads we're now considering the
total time of a command as the time spent on call (main thread) + the time spent on
the background thread ( if marked within `RedisModule_MeasureTimeStart()` and
`RedisModule_MeasureTimeEnd()` ) + the time spent on replying (main thread)
To test for this feature we've added a `unit/moduleapi/blockonbackground` test that relies on
a module that blocks the client and sleeps on the background for a given time.
- check blocked command that uses RedisModule_MeasureTimeStart() is tracking background time
- check blocked command that uses RedisModule_MeasureTimeStart() is tracking background time even in timeout
- check blocked command with multiple calls RedisModule_MeasureTimeStart() is tracking the total background time
- check blocked command without calling RedisModule_MeasureTimeStart() is not reporting background time
New commands:
`HRANDFIELD [<count> [WITHVALUES]]`
`ZRANDMEMBER [<count> [WITHSCORES]]`
Algorithms are similar to the one in SRANDMEMBER.
Both return a simple bulk response when no arguments are given, and an array otherwise.
In case values/scores are requested, RESP2 returns a long array, and RESP3 a nested array.
note: in all 3 commands, the only option that also provides random order is the one with negative count.
Changes to SRANDMEMBER
* Optimization when count is 1, we can use the more efficient algorithm of non-unique random
* optimization: work with sds strings rather than robj
Other changes:
* zzlGetScore: when zset needs to convert string to double, we use safer memcpy (in
case the buffer is too small)
* Solve a "bug" in SRANDMEMBER test: it intended to test a positive count (case 3 or
case 4) and by accident used a negative count
Co-authored-by: xinluton <xinluton@qq.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
APIs added for these stream operations: add, delete, iterate and
trim (by ID or maxlength). The functions are prefixed by RM_Stream.
* RM_StreamAdd
* RM_StreamDelete
* RM_StreamIteratorStart
* RM_StreamIteratorStop
* RM_StreamIteratorNextID
* RM_StreamIteratorNextField
* RM_StreamIteratorDelete
* RM_StreamTrimByLength
* RM_StreamTrimByID
The type RedisModuleStreamID is added and functions for converting
from and to RedisModuleString.
* RM_CreateStringFromStreamID
* RM_StringToStreamID
Whenever the stream functions return REDISMODULE_ERR, errno is set to
provide additional error information.
Refactoring: The zset iterator fields in the RedisModuleKey struct
are wrapped in a union, to allow the same space to be used for type-
specific info for streams and allow future use for other key types.
This is both a bugfix and an enhancement.
Internally, Sentinel relies entirely on IP addresses to identify
instances. When configured with a new master, it also requires users to
specify and IP and not hostname.
However, replicas may use the replica-announce-ip configuration to
announce a hostname. When that happens, Sentinel fails to match the
announced hostname with the expected IP and considers that a different
instance, triggering reconfiguration, etc.
Another use case is where TLS is used and clients are expected to match
the hostname to connect to with the certificate's SAN attribute. To
properly implement this configuration, it is necessary for Sentinel to
redirect clients to a hostname rather than an IP address.
The new 'resolve-hostnames' configuration parameter determines if
Sentinel is willing to accept hostnames. It is set by default to no,
which maintains backwards compatibility and avoids unexpected DNS
resolution delays on systems with DNS configuration issues.
Internally, Sentinel continues to identify instances by their resolved
IP address and will also report the IP by default. The new
'announce-hostnames' parameter determines if Sentinel should prefer to
announce a hostname, when available, rather than an IP address. This
applies to addresses returned to clients, as well as their
representation in the configuration file, REPLICAOF configuration
commands, etc.
This commit also introduces SENTINEL CONFIG GET and SENTINEL CONFIG SET
which can be used to introspect or configure global Sentinel
configuration that was previously was only possible by directly
accessing the configuration file and possibly restarting the instance.
Co-authored-by: myl1024 <myl92916@qq.com>
Co-authored-by: sundb <sundbcn@gmail.com>
if option `set-proc-title' is no, then do nothing for proc title.
The reason has been explained long ago, see following:
We update redis to 2.8.8, then found there are some side effect when
redis always change the process title.
We run several slave instance on one computer, and all these salves
listen on unix socket only, then ps will show:
1 S redis 18036 1 0 80 0 - 56130 ep_pol 14:02 ? 00:00:31 /usr/sbin/redis-server *:0
1 S redis 23949 1 0 80 0 - 11074 ep_pol 15:41 ? 00:00:00 /usr/sbin/redis-server *:0
for redis 2.6 the output of ps is like following:
1 S redis 18036 1 0 80 0 - 56130 ep_pol 14:02 ? 00:00:31 /usr/sbin/redis-server /etc/redis/a.conf
1 S redis 23949 1 0 80 0 - 11074 ep_pol 15:41 ? 00:00:00 /usr/sbin/redis-server /etc/redis/b.conf
Later is more informational in our case. The situation
is worse when we manage the config and process running
state by salt. Salt check the process by running "ps |
grep SIG" (for Gentoo System) to check the running
state, where SIG is the string to search for when
looking for the service process with ps. Previously, we
define sig as "/usr/sbin/redis-server
/etc/redis/a.conf". Since the ps output is identical for
our case, so we have no way to check the state of
specified redis instance.
So, for our case, we prefer the old behavior, i.e, do
not change the process title for the main redis process.
Or add an option such as "set-proc-title [yes|no]" to
control this behavior.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
This commit introduces two new command and two options for an existing command
GETEX <key> [PERSIST][EX seconds][PX milliseconds] [EXAT seconds-timestamp]
[PXAT milliseconds-timestamp]
The getexCommand() function implements extended options and variants of the GET
command. Unlike GET command this command is not read-only. Only one of the options
can be used at a given time.
1. PERSIST removes any TTL associated with the key.
2. EX Set expiry TTL in seconds.
3. PX Set expiry TTL in milliseconds.
4. EXAT Same like EX instead of specifying the number of seconds representing the
TTL (time to live), it takes an absolute Unix timestamp
5. PXAT Same like PX instead of specifying the number of milliseconds representing the
TTL (time to live), it takes an absolute Unix timestamp
Command would return either the bulk string, error or nil.
GETDEL <key>
Would delete the key after getting.
SET key value [NX] [XX] [KEEPTTL] [GET] [EX <seconds>] [PX <milliseconds>]
[EXAT <seconds-timestamp>][PXAT <milliseconds-timestamp>]
Two new options added here are EXAT and PXAT
Key implementation notes
- `SET` with `PX/EX/EXAT/PXAT` is always translated to `PXAT` in `AOF`. When relative time is
specified (`PX/EX`), replication will always use `PX`.
- `setexCommand` and `psetexCommand` would no longer need translation in `feedAppendOnlyFile`
as they are modified to invoke `setGenericCommand ` with appropriate flags which will take care of
correct AOF translation.
- `GETEX` without any optional argument behaves like `GET`.
- `GETEX` command is never propagated, It is either propagated as `PEXPIRE[AT], or PERSIST`.
- `GETDEL` command is propagated as `DEL`
- Combined the validation for `SET` and `GETEX` arguments.
- Test cases to validate AOF/Replication propagation
It was confusing as to why these don't return a map type.
the reason is that order matters, so we need to make sure the client
library knows to respect it.
Added comments in the implementation and tests to cover it.
This commit fixes a well known and an annoying issue in Sentinel mode.
Cause of this issue:
Currently, Redis rewrite process works well in server mode, however in sentinel mode,
the sentinel config has variant semantics for different configurations, in example configuration
https://github.com/redis/redis/blob/unstable/sentinel.conf, we put comments on these.
However the rewrite process only treat the sentinel config as a single option. During rewrite
process, it will mess up with the lines and comments.
Approaches:
In order to solve this issue, we need to differentiate different subconfig options in sentinel separately,
for example, sentinel monitor <master-name> <ip> <redis-port> <quorum>
we can treat it as sentinel monitor option, instead of the sentinel option.
This commit also fixes the dependency issue when putting configurations in sentinel.conf.
For example before this commit,we must put
`sentinel monitor <master-name> <ip> <redis-port> <quorum>` before
`sentinel auth-pass <master-name> <password>` for a single master,
otherwise the server cannot start and will return error. This commit fixes this issue, as long as
the monitoring master was configured, no matter the sequence is, the sentinel can start and run properly.
some tests use attach_to_replication_stream to watch what's propagated
to replicas, but in some cases the periodic ping may slip in and fail
the test.
we disable that ping by setting the period to once an hour (tests should
not run for that long).
other change is so that the next time this oom-score-adj test fails,
we'll see the value (assert_equals prints it)
1. Valgrind leak in a recent change in a module api test
2. Increase treshold of a RESTORE TTL test
3. Change assertions to use assert_range which prints the values
BLPOP and other blocking list commands can only block on empty keys
and LPUSH only wakes up clients when the list is created.
Using the module API, it's possible to block on a non-empty key.
Unblocking a client blocked on a non-empty list (or zset) can only
be done using RedisModule_SignalKeyAsReady(). This commit tests it.
the test was misleading because the module would actually woke up on a wrong type and
re-blocked, while the test name suggests the module doesn't not wake up at all on a wrong type..
i changed the name of the test + added verification that indeed the module wakes up and gets
re-blocked after it understand it's the wrong type
Sentinel uses execve to run scripts, so it needs to use FD_CLOEXEC
on all file descriptors, so that they're not accessible by the script it runs.
This commit includes a change to the sentinel tests, which verifies no
FDs are left opened when the script is executed.
This commit adds tests to make sure that relative and absolute expire commands
are propagated as is to replicas and stop any future attempt to change that without
a proper discussion. see #8327 and #5171
Additionally it slightly improve the AOF test that tests the opposite (always
propagating absolute times), by covering more commands, and shaving 2
seconds from the test time.
This was a regression from #7625 (only in 6.2 RC2).
This makes it possible again to implement blocking list and zset
commands using the modules API.
This commit also includes a test case for the reverse: A module
unblocks a client blocked on BLPOP by inserting elements using
RedisModule_ListPush(). This already works, but it was untested.
This adds basic coverage to IO threads by running the cluster and few selected Redis test suite tests with the IO threads enabled.
Also provides some necessary additional improvements to the test suite:
* Add --config to sentinel/cluster tests for arbitrary configuration.
* Fix --tags whitelisting which was broken.
* Add a `network` tag to some tests that are more network intensive. This is work in progress and more tests should be properly tagged in the future.
* Adds ASYNC and SYNC arguments to SCRIPT FLUSH
* Adds SYNC argument to FLUSHDB and FLUSHALL
* Adds new config to control the default behavior of FLUSHDB, FLUSHALL and SCRIPT FLUASH.
the new behavior is as follows:
* FLUSH[ALL|DB],SCRIPT FLUSH: Determine sync or async according to the
value of lazyfree-lazy-user-flush.
* FLUSH[ALL|DB],SCRIPT FLUSH ASYNC: Always flushes the database in an async manner.
* FLUSH[ALL|DB],SCRIPT FLUSH SYNC: Always flushes the database in a sync manner.
