This commit mainly fixes empty keys due to RDB loading and restore command,
which was omitted in #9297.
1) When loading quicklsit, if all the ziplists in the quicklist are empty, NULL will be returned.
If only some of the ziplists are empty, then we will skip the empty ziplists silently.
2) When loading hash zipmap, if zipmap is empty, sanitization check will fail.
3) When loading hash ziplist, if ziplist is empty, NULL will be returned.
4) Add RDB loading test with sanitize.
Recently we found two issues in the fuzzer tester: #9302#9285
After fixing them, more problems surfaced and this PR (as well as #9297) aims to fix them.
Here's a list of the fixes
- Prevent an overflow when allocating a dict hashtable
- Prevent OOM when attempting to allocate a huge string
- Prevent a few invalid accesses in listpack
- Improve sanitization of listpack first entry
- Validate integrity of stream consumer groups PEL
- Validate integrity of stream listpack entry IDs
- Validate ziplist tail followed by extra data which start with 0xff
Co-authored-by: sundb <sundbcn@gmail.com>
When we load rdb or restore command, if we encounter a length of 0, it will result in the creation of an empty key.
This could either be a corrupt payload, or a result of a bug (see #8453 )
This PR mainly fixes the following:
1) When restore command will return `Bad data format` error.
2) When loading RDB, we will silently discard the key.
Co-authored-by: Oran Agra <oran@redislabs.com>
Reduce dict struct memory overhead
on 64bit dict size goes down from jemalloc's 96 byte bin to its 56 byte bin.
summary of changes:
- Remove `privdata` from callbacks and dict creation. (this affects many files, see "Interface change" below).
- Meld `dictht` struct into the `dict` struct to eliminate struct padding. (this affects just dict.c and defrag.c)
- Eliminate the `sizemask` field, can be calculated from size when needed.
- Convert the `size` field into `size_exp` (exponent), utilizes one byte instead of 8.
Interface change: pass dict pointer to dict type call back functions.
This is instead of passing the removed privdata field. In the future if
we'd like to have private data in the callbacks we can extract it from
the dict type. We can extend dictType to include a custom dict struct
allocator and use it to allocate more data at the end of the dict
struct. This data can then be used to store private data later acccessed
by the callbacks.
## Backgroud
As we know, after `fork`, one process will copy pages when writing data to these
pages(CoW), and another process still keep old pages, they totally cost more memory.
For redis, we suffered that redis consumed much memory when the fork child is serializing
key/values, even that maybe cause OOM.
But actually we find, in redis fork child process, the child process don't need to keep some
memory and parent process may write or update that, for example, child process will never
access the key-value that is serialized but users may update it in parent process.
So we think it may reduce COW if the child process release memory that it is not needed.
## Implementation
For releasing key value in child process, we may think we call `decrRefCount` to free memory,
but i find the fork child process still use much memory when we don't write any data to redis,
and it costs much more time that slows down bgsave. Maybe because memory allocator doesn't
really release memory to OS, and it may modify some inner data for this free operation, especially
when we free small objects.
Moreover, CoW is based on pages, so it is a easy way that we only free the memory bulk that is
not less than kernel page size. madvise(MADV_DONTNEED) can quickly release specified region
pages to OS bypassing memory allocator, and allocator still consider that this memory still is used
and don't change its inner data.
There are some buffers we can release in the fork child process:
- **Serialized key-values**
the fork child process never access serialized key-values, so we try to free them.
Because we only can release big bulk memory, and it is time consumed to iterate all
items/members/fields/entries of complex data type. So we decide to iterate them and
try to release them only when their average size of item/member/field/entry is more
than page size of OS.
- **Replication backlog**
Because replication backlog is a cycle buffer, it will be changed quickly if redis has heavy
write traffic, but in fork child process, we don't need to access that.
- **Client buffers**
If clients have requests during having the fork child process, clients' buffer also be changed
frequently. The memory includes client query buffer, output buffer, and client struct used memory.
To get child process peak private dirty memory, we need to count peak memory instead
of last used memory, because the child process may continue to release memory (since
COW used to only grow till now, the last was equivalent to the peak).
Also we're adding a new `current_cow_peak` info variable (to complement the existing
`current_cow_size`)
Co-authored-by: Oran Agra <oran@redislabs.com>
Fixes:
- When a consumer is created as a side effect, redis didn't issue a keyspace notification,
nor incremented the server.dirty (affects periodic snapshots).
this was a bug in XREADGROUP, XCLAIM, and XAUTOCLAIM.
- When attempting to delete a non-existent consumer, don't issue a keyspace notification
and don't increment server.dirty
this was a bug in XGROUP DELCONSUMER
Other changes:
- Changed streamLookupConsumer() to always only do lookup consumer (never do implicit creation),
Its last seen time is updated unless the SLC_NO_REFRESH flag is specified.
- Added streamCreateConsumer() to create a new consumer. When the creation is successful,
it will notify and dirty++ unless the SCC_NO_NOTIFY or SCC_NO_DIRTIFY flags is specified.
- Changed streamDelConsumer() to always only do delete consumer.
- Added keyspace notifications tests about stream events.
Currently a replica is able to recover from a short read (when diskless loading
is enabled) and avoid crashing/exiting, replying to the master and then the rdb
could be sent again by the master for another load attempt by the replica.
There were a few scenarios that were not behaving similarly, such as when
there is no end-of-file marker, or when module aux data failed to load, which
should be allowed to occur due to a short read.
Create new module type enhanced callbacks: mem_usage2, free_effort2, unlink2, copy2.
These will be given a context point from which the module can obtain the key name and database id.
In addition the digest and defrag context can now be used to obtain the key name and database id.
This PR adds a spell checker CI action that will fail future PRs if they introduce typos and spelling mistakes.
This spell checker is based on blacklist of common spelling mistakes, so it will not catch everything,
but at least it is also unlikely to cause false positives.
Besides that, the PR also fixes many spelling mistakes and types, not all are a result of the spell checker we use.
Here's a summary of other changes:
1. Scanned the entire source code and fixes all sorts of typos and spelling mistakes (including missing or extra spaces).
2. Outdated function / variable / argument names in comments
3. Fix outdated keyspace masks error log when we check `config.notify-keyspace-events` in loadServerConfigFromString.
4. Trim the white space at the end of line in `module.c`. Check: https://github.com/redis/redis/pull/7751
5. Some outdated https link URLs.
6. Fix some outdated comment. Such as:
- In README: about the rdb, we used to said create a `thread`, change to `process`
- dbRandomKey function coment (about the dictGetRandomKey, change to dictGetFairRandomKey)
- notifyKeyspaceEvent fucntion comment (add type arg)
- Some others minor fix in comment (Most of them are incorrectly quoted by variable names)
7. Modified the error log so that users can easily distinguish between TCP and TLS in `changeBindAddr`
In diskless replication, we create a read pipe for the RDB, between the child and the parent.
When we close this pipe (fd), the read handler also needs to be removed from the event loop (if it still registered).
Otherwise, next time we will use the same fd, the registration will be fail (panic), because
we will use EPOLL_CTL_MOD (the fd still register in the event loop), on fd that already removed from epoll_ctl
when string2ll was made to replace isStringRepresentableAsLongLong
(which was similar to what rdbTryIntegerEncoding does),
rdbTryIntegerEncoding was probably forgotten.
* Adding current_save_keys_total and current_save_keys_processed info fields.
Present in replication, BGSAVE and AOFRW.
* Changing RM_SendChildCOWInfo() to RM_SendChildHeartbeat(double progress)
* Adding new info field current_fork_perc. Present in Replication, BGSAVE, AOFRW,
and module forks.
Add INFO field, rdb_active_cow_size, to report COW of a live fork child while
it's active.
- once in 1024 keys check the time, and if there's more than one second since
the last report send a report to the parent via the pipe.
- refactor the child_info_data struct, it's an implementation detail that
shouldn't be in the server struct, and not used to communicate data between
caller and callee
- remove the magic value from that struct (not sure what it was good for), and
instead add handling of short reads.
- add another value to the structure, cow_type, to indicate if the report is
for the new rdb_active_cow_size field, or it's the last report of a
successful operation
- add new Module API to report the active COW
- add more asserts variants to test.tcl
This is a refactory commit, isn't suppose to have any actual impact.
it does the following:
- keep just one server struct fork child pid variable instead of 3
- have one server struct variable indicating the purpose of the current fork
child.
- redisFork is now responsible of updating the server struct with the pid,
which means it can be the one that calls updateDictResizePolicy
- move child info pipe handling into redisFork instead of having them
repeated outside
- there are two classes of fork purposes, mutually exclusive group (AOF, RDB,
Module), and one that can create several forks to coexist in parallel (LDB,
but maybe Modules some day too, Module API allows for that).
- minor fix to killRDBChild:
unlike killAppendOnlyChild and TerminateModuleForkChild, the killRDBChild
doesn't clear the pid variable or call wait4, so checkChildrenDone does
the cleanup for it.
This commit removes the explicit calls to rdbRemoveTempFile, closeChildInfoPipe,
updateDictResizePolicy, which didn't do any harm, but where unnecessary.
* Allow runtest-moduleapi use a different 'make', for systems where GNU Make is 'gmake'.
* Fix issue with builds on Solaris re-building everything from scratch due to CFLAGS/LDFLAGS not stored.
* Fix compile failure on Solaris due to atomicvar and a bunch of warnings.
* Fix garbled log timestamps on Solaris.
If RESTORE passes successfully with full sanitization, we can't affort
to crash later on assertion due to duplicate records in a hash when
converting it form ziplist to dict.
This means that when doing full sanitization, we must make sure there
are no duplicate records in any of the collections.
The test creates keys with various encodings, DUMP them, corrupt the payload
and RESTORES it.
It utilizes the recently added use-exit-on-panic config to distinguish between
asserts and segfaults.
If the restore succeeds, it runs random commands on the key to attempt to
trigger a crash.
It runs in two modes, one with deep sanitation enabled and one without.
In the first one we don't expect any assertions or segfaults, in the second one
we expect assertions, but no segfaults.
We also check for leaks and invalid reads using valgrind, and if we find them
we print the commands that lead to that issue.
Changes in the code (other than the test):
- Replace a few NPD (null pointer deference) flows and division by zero with an
assertion, so that it doesn't fail the test. (since we set the server to use
`exit` rather than `abort` on assertion).
- Fix quite a lot of flows in rdb.c that could have lead to memory leaks in
RESTORE command (since it now responds with an error rather than panic)
- Add a DEBUG flag for SET-SKIP-CHECKSUM-VALIDATION so that the test don't need
to bother with faking a valid checksum
- Remove a pile of code in serverLogObjectDebugInfo which is actually unsafe to
run in the crash report (see comments in the code)
- fix a missing boundary check in lzf_decompress
test suite infra improvements:
- be able to run valgrind checks before the process terminates
- rotate log files when restarting servers
When loading an encoded payload we will at least do a shallow validation to
check that the size that's encoded in the payload matches the size of the
allocation.
This let's us later use this encoded size to make sure the various offsets
inside encoded payload don't reach outside the allocation, if they do, we'll
assert/panic, but at least we won't segfault or smear memory.
We can also do 'deep' validation which runs on all the records of the encoded
payload and validates that they don't contain invalid offsets. This lets us
detect corruptions early and reject a RESTORE command rather than accepting
it and asserting (crashing) later when accessing that payload via some command.
configuration:
- adding ACL flag skip-sanitize-payload
- adding config sanitize-dump-payload [yes/no/clients]
For now, we don't have a good way to ensure MIGRATE in cluster resharding isn't
being slowed down by these sanitation, so i'm setting the default value to `no`,
but later on it should be set to `clients` by default.
changes:
- changing rdbReportError not to `exit` in RESTORE command
- adding a new stat to be able to later check if cluster MIGRATE isn't being
slowed down by sanitation.
Expose new `loading_rdb_used_mem` showing the used memory of the server
that saved the RDB file we're currently using.
This is useful in diskless replication when the total size of the rdb is
unkown, and can be used as a rought estimation of progres.
Use that new field to calculate the "user friendly"
`loading_loaded_perc` and `loading_eta_seconds`.
Expose `master_sync_total_bytes` and `master_sync_total_bytes` to complement
on the existing `master_sync_total_bytes` (which cannot be used on its own
to calculate progress).
Add "user friendly" field for `master_sync_perc`
- rdbSaveSingleModuleAux() used RedisModuleIO's "bytes" field for
tracking written bytes before calling moduleInitIOContext() which sets
"bytes" to zero
- rdbSaveObject() re-initialized RedisModuleIO too late
This return value is not used at the moment since it's only tested
against -1, and the actual byte count isn't used yet.
Co-authored-by: Tomasz Poradowski <tomasz.poradowski@generiscorp.com>
In redisFork(), we don't set child pid, so updateDictResizePolicy()
doesn't take effect, that isn't friendly for copy-on-write.
The bug was introduced this in redis 6.0: 56258c6
`info Persistence` will include correct (updated) rdb_last_bgsave_time_sec
For diskless bgsave (sockets) too (like a few other persistence info fields).
Refactor code to reduce duplicate code.
When fclose would fail, the previous implementation would have attempted to do fclose again
this can in theory lead to segfault.
other changes:
check for non-zero return value as failure rather than a specific error code.
this doesn't fix a real bug, just a minor cleanup.
XREADGROUP auto-creates the consumer inside the consumer group the
first time it saw it.
When XREADGROUP is being used with NOACK option, the message will not
be added into the client's PEL and XGROUP SETID would be propagated.
When the replica gets the XGROUP SETID it will only update the last delivered
id of the group, but will not create the consumer.
So, in this commit XGROUP CREATECONSUMER is being added.
Command pattern: XGROUP CREATECONSUMER <key> <group> <consumer>.
When NOACK option is being used, createconsumer command would be
propagated as well.
In case of AOFREWRITE, consumer with an empty PEL would be saved with
XGROUP CREATECONSUMER whereas consumer with pending entries would be
saved with XCLAIM
We're already using bg_unlink in several places to delete the rdb file in the background,
and avoid paying the cost of the deletion from our main thread.
This commit uses bg_unlink to remove the temporary rdb file in the background too.
However, in case we delete that rdb file just before exiting, we don't actually wait for the
background thread or the main thread to delete it, and just let the OS clean up after us.
i.e. we open the file, unlink it and exit with the fd still open.
Furthermore, rdbRemoveTempFile can be called from a thread and was using snprintf which is
not async-signal-safe, we now use ll2string instead.
Starting redis 6.0 and the changes we made to the diskless master to be
suitable for TLS, I made the master avoid reaping (wait3) the pid of the
child until we know all replicas are done reading their rdb.
I did that in order to avoid a state where the rdb_child_pid is -1 but
we don't yet want to start another fork (still busy serving that data to
replicas).
It turns out that the solution used so far was problematic in case the
fork child was being killed (e.g. by the kernel OOM killer), in that
case there's a chance that we currently disabled the read event on the
rdb pipe, since we're waiting for a replica to become writable again.
and in that scenario the master would have never realized the child
exited, and the replica will remain hung too.
Note that there's no mechanism to detect a hung replica while it's in
rdb transfer state.
The solution here is to add another pipe which is used by the parent to
tell the child it is safe to exit. this mean that when the child exits,
for whatever reason, it is safe to reap it.
Besides that, i'm re-introducing an adjustment to REPLCONF ACK which was
part of #6271 (Accelerate diskless master connections) but was dropped
when that PR was rebased after the TLS fork/pipe changes (5a47794).
Now that RdbPipeCleanup no longer calls checkChildrenDone, and the ACK
has chance to detect that the child exited, it should be the one to call
it so that we don't have to wait for cron (server.hz) to do that.
During long running scripts or loading RDB/AOF, we may need to do some
defragging. Since processEventsWhileBlocked is called periodically at
unknown intervals, and many cron jobs either depend on run_with_period
(including active defrag), or rely on being called at server.hz rate
(i.e. active defrag knows ho much time to run by looking at server.hz),
the whileBlockedCron may have to run a loop triggering the cron jobs in it
(currently only active defrag) several times.
Other changes:
- Adding a test for defrag during aof loading.
- Changing key-load-delay config to take negative values for fractions
of a microsecond sleep
During a long AOF or RDB loading, the memory stats were not updated, and
INFO would return stale data, specifically about fragmentation and RSS.
In the past some of these were sampled directly inside the INFO command,
but were moved to cron as an optimization.
This commit introduces a concept of loadingCron which should take
some of the responsibilities of serverCron.
It attempts to limit it's rate to approximately the server Hz, but may
not be very accurate.
In order to avoid too many system call, we use the cached ustime, and
also make sure to update it in both AOF loading and RDB loading inside
processEventsWhileBlocked (it seems AOF loading was missing it).
Since the dynamic allocations in raxIterator are only used for deep walks, memory
leak due to missing call to raxStop can only happen for rax with key names longer
than 32 bytes.
Out of all the missing calls, the only ones that may lead to a leak are the rax
for consumer groups and consumers, and these were only in AOFRW and rdbSave, which
normally only happen in fork or at shutdown.
* fix memlry leaks with diskless replica short read.
* fix a few timing issues with valgrind runs
* fix issue with valgrind and watchdog schedule signal
about the valgrind WD issue:
the stack trace test in logging.tcl, has issues with valgrind:
==28808== Can't extend stack to 0x1ffeffdb38 during signal delivery for thread 1:
==28808== too small or bad protection modes
it seems to be some valgrind bug with SA_ONSTACK.
SA_ONSTACK seems unneeded since WD is not recursive (SA_NODEFER was removed),
also, not sure if it's even valid without a call to sigaltstack()
Currently, there are several types of threads/child processes of a
redis server. Sometimes we need deeply optimise the performance of
redis, so we would like to isolate threads/processes.
There were some discussion about cpu affinity cases in the issue:
https://github.com/antirez/redis/issues/2863
So implement cpu affinity setting by redis.conf in this patch, then
we can config server_cpulist/bio_cpulist/aof_rewrite_cpulist/
bgsave_cpulist by cpu list.
Examples of cpulist in redis.conf:
server_cpulist 0-7:2 means cpu affinity 0,2,4,6
bio_cpulist 1,3 means cpu affinity 1,3
aof_rewrite_cpulist 8-11 means cpu affinity 8,9,10,11
bgsave_cpulist 1,10-11 means cpu affinity 1,10,11
Test on linux/freebsd, both work fine.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
