1. Master replication offset was cleared after switching configuration
to some other slave, since it was assumed you can't PSYNC after a
switch. Note the case anymore and when we successfully PSYNC we need to
have our offset untouched.
2. Secondary replication ID was not reset to "000..." pattern at
startup.
3. Master in error state replying -LOADING or other transient errors
forced the slave to discard the cached master and full resync. This is
now fixed.
4. Better logging of what's happening on failed PSYNCs.
This means that stopping a slave and restarting it will still make it
able to PSYNC with the master. Moreover the master itself will retain
its ID/offset, in case it gets turned into a slave, or if a slave will
try to PSYNC with it with an exactly updated offset (otherwise there is
no backlog).
This change was possible thanks to PSYNC v2 that makes saving the current
replication state much simpler.
The gist of the changes is that now, partial resynchronizations between
slaves and masters (without the need of a full resync with RDB transfer
and so forth), work in a number of cases when it was impossible
in the past. For instance:
1. When a slave is promoted to mastrer, the slaves of the old master can
partially resynchronize with the new master.
2. Chained slalves (slaves of slaves) can be moved to replicate to other
slaves or the master itsef, without requiring a full resync.
3. The master itself, after being turned into a slave, is able to
partially resynchronize with the new master, when it joins replication
again.
In order to obtain this, the following main changes were operated:
* Slaves also take a replication backlog, not just masters.
* Same stream replication for all the slaves and sub slaves. The
replication stream is identical from the top level master to its slaves
and is also the same from the slaves to their sub-slaves and so forth.
This means that if a slave is later promoted to master, it has the
same replication backlong, and can partially resynchronize with its
slaves (that were previously slaves of the old master).
* A given replication history is no longer identified by the `runid` of
a Redis node. There is instead a `replication ID` which changes every
time the instance has a new history no longer coherent with the past
one. So, for example, slaves publish the same replication history of
their master, however when they are turned into masters, they publish
a new replication ID, but still remember the old ID, so that they are
able to partially resynchronize with slaves of the old master (up to a
given offset).
* The replication protocol was slightly modified so that a new extended
+CONTINUE reply from the master is able to inform the slave of a
replication ID change.
* REPLCONF CAPA is used in order to notify masters that a slave is able
to understand the new +CONTINUE reply.
* The RDB file was extended with an auxiliary field that is able to
select a given DB after loading in the slave, so that the slave can
continue receiving the replication stream from the point it was
disconnected without requiring the master to insert "SELECT" statements.
This is useful in order to guarantee the "same stream" property, because
the slave must be able to accumulate an identical backlog.
* Slave pings to sub-slaves are now sent in a special form, when the
top-level master is disconnected, in order to don't interfer with the
replication stream. We just use out of band "\n" bytes as in other parts
of the Redis protocol.
An old design document is available here:
https://gist.github.com/antirez/ae068f95c0d084891305
However the implementation is not identical to the description because
during the work to implement it, different changes were needed in order
to make things working well.
Redis fails to compile on MacOS 10.8.5 with Clang 4, version 421.0.57
(based on LLVM 3.1svn).
When compiling zmalloc.c, we get these warnings:
CC zmalloc.o
zmalloc.c:109:5: warning: implicit declaration of function '__atomic_add_fetch' is invalid in C99 [-Wimplicit-function-declaration]
update_zmalloc_stat_alloc(zmalloc_size(ptr));
^
zmalloc.c:75:9: note: expanded from macro 'update_zmalloc_stat_alloc'
atomicIncr(used_memory,__n,used_memory_mutex); \
^
./atomicvar.h:57:37: note: expanded from macro 'atomicIncr'
#define atomicIncr(var,count,mutex) __atomic_add_fetch(&var,(count),__ATOMIC_RELAXED)
^
zmalloc.c:145:5: warning: implicit declaration of function '__atomic_sub_fetch' is invalid in C99 [-Wimplicit-function-declaration]
update_zmalloc_stat_free(oldsize);
^
zmalloc.c:85:9: note: expanded from macro 'update_zmalloc_stat_free'
atomicDecr(used_memory,__n,used_memory_mutex); \
^
./atomicvar.h:58:37: note: expanded from macro 'atomicDecr'
#define atomicDecr(var,count,mutex) __atomic_sub_fetch(&var,(count),__ATOMIC_RELAXED)
^
zmalloc.c:205:9: warning: implicit declaration of function '__atomic_load_n' is invalid in C99 [-Wimplicit-function-declaration]
atomicGet(used_memory,um,used_memory_mutex);
^
./atomicvar.h:60:14: note: expanded from macro 'atomicGet'
dstvar = __atomic_load_n(&var,__ATOMIC_RELAXED); \
^
3 warnings generated.
Also on lazyfree.c:
CC lazyfree.o
lazyfree.c:68:13: warning: implicit declaration of function '__atomic_add_fetch' is invalid in C99 [-Wimplicit-function-declaration]
atomicIncr(lazyfree_objects,1,lazyfree_objects_mutex);
^
./atomicvar.h:57:37: note: expanded from macro 'atomicIncr'
#define atomicIncr(var,count,mutex) __atomic_add_fetch(&var,(count),__ATOMIC_RELAXED)
^
lazyfree.c:111:5: warning: implicit declaration of function '__atomic_sub_fetch' is invalid in C99 [-Wimplicit-function-declaration]
atomicDecr(lazyfree_objects,1,lazyfree_objects_mutex);
^
./atomicvar.h:58:37: note: expanded from macro 'atomicDecr'
#define atomicDecr(var,count,mutex) __atomic_sub_fetch(&var,(count),__ATOMIC_RELAXED)
^
2 warnings generated.
Then in the linking stage:
LINK redis-server
Undefined symbols for architecture x86_64:
"___atomic_add_fetch", referenced from:
_zmalloc in zmalloc.o
_zcalloc in zmalloc.o
_zrealloc in zmalloc.o
_dbAsyncDelete in lazyfree.o
_emptyDbAsync in lazyfree.o
_slotToKeyFlushAsync in lazyfree.o
"___atomic_load_n", referenced from:
_zmalloc_used_memory in zmalloc.o
_zmalloc_get_fragmentation_ratio in zmalloc.o
"___atomic_sub_fetch", referenced from:
_zrealloc in zmalloc.o
_zfree in zmalloc.o
_lazyfreeFreeObjectFromBioThread in lazyfree.o
_lazyfreeFreeDatabaseFromBioThread in lazyfree.o
_lazyfreeFreeSlotsMapFromBioThread in lazyfree.o
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make[1]: *** [redis-server] Error 1
make: *** [all] Error 2
With this patch, the compilation is sucessful, no warnings.
Running `make test` we get a almost clean bill of health. Test pass with
one exception:
[err]: Check for memory leaks (pid 52793) in tests/unit/dump.tcl
[err]: Check for memory leaks (pid 53103) in tests/unit/auth.tcl
[err]: Check for memory leaks (pid 53117) in tests/unit/auth.tcl
[err]: Check for memory leaks (pid 53131) in tests/unit/protocol.tcl
[err]: Check for memory leaks (pid 53145) in tests/unit/protocol.tcl
[ok]: Check for memory leaks (pid 53160)
[err]: Check for memory leaks (pid 53175) in tests/unit/scan.tcl
[ok]: Check for memory leaks (pid 53189)
[err]: Check for memory leaks (pid 53221) in tests/unit/type/incr.tcl
.
.
.
Full debug log (289MB, uncompressed) available at
https://dl.dropboxusercontent.com/u/75548/logs/redis-debug-log-macos-10.8.5.log.xz
Most if not all of the memory leak tests fail. Not sure if this is
related. They are the only ones that fail. I belive they are not related,
but just the memory leak detector is not working properly on 10.8.5.
Signed-off-by: Pedro Melo <melo@simplicidade.org>
This new command swaps two Redis databases, so that immediately all the
clients connected to a given DB will see the data of the other DB, and
the other way around. Example:
SWAPDB 0 1
This will swap DB 0 with DB 1. All the clients connected with DB 0 will
immediately see the new data, exactly like all the clients connected
with DB 1 will see the data that was formerly of DB 0.
MOTIVATION AND HISTORY
---
The command was recently demanded by Pedro Melo, but was suggested in
the past multiple times, and always refused by me.
The reason why it was asked: Imagine you have clients operating in DB 0.
At the same time, you create a new version of the dataset in DB 1.
When the new version of the dataset is available, you immediately want
to swap the two views, so that the clients will transparently use the
new version of the data. At the same time you'll likely destroy the
DB 1 dataset (that contains the old data) and start to build a new
version, to repeat the process.
This is an interesting pattern, but the reason why I always opposed to
implement this, was that FLUSHDB was a blocking command in Redis before
Redis 4.0 improvements. Now we have FLUSHDB ASYNC that releases the
old data in O(1) from the point of view of the client, to reclaim memory
incrementally in a different thread.
At this point, the pattern can really be supported without latency
spikes, so I'm providing this implementation for the users to comment.
In case a very compelling argument will be made against this new command
it may be removed.
BEHAVIOR WITH BLOCKING OPERATIONS
---
If a client is blocking for a list in a given DB, after the swap it will
still be blocked in the same DB ID, since this is the most logical thing
to do: if I was blocked for a list push to list "foo", even after the
swap I want still a LPUSH to reach the key "foo" in the same DB in order
to unblock.
However an interesting thing happens when a client is, for instance,
blocked waiting for new elements in list "foo" of DB 0. Then the DB
0 and 1 are swapped with SWAPDB. However the DB 1 happened to have
a list called "foo" containing elements. When this happens, this
implementation can correctly unblock the client.
It is possible that there are subtle corner cases that are not covered
in the implementation, but since the command is self-contained from the
POV of the implementation and the Redis core, it cannot cause anything
bad if not used.
Tests and documentation are yet to be provided.
It was noted by @dvirsky that it is not possible to use string functions
when writing the AOF file. This sometimes is critical since the command
rewriting may need to be built in the context of the AOF callback, and
without access to the context, and the limited types that the AOF
production functions will accept, this can be an issue.
Moreover there are other needs that we can't anticipate regarding the
ability to use Redis Modules APIs using the context in order to build
representations to emit AOF / RDB.
Because of this a new API was added that allows the user to get a
temporary context from the IO context. The context is auto released
if obtained when the RDB / AOF callback returns.
Calling multiple time the function to get the context, always returns
the same one, since it is invalid to have more than a single context.
This commit fixes a vunlerability reported by Cory Duplantis
of Cisco Talos, see TALOS-2016-0206 for reference.
CONFIG SET client-output-buffer-limit accepts as client class "master"
which is actually only used to implement CLIENT KILL. The "master" class
has ID 3. What happens is that the global structure:
server.client_obuf_limits[class]
Is accessed with class = 3. However it is a 3 elements array, so writing
the 4th element means to write up to 24 bytes of memory *after* the end
of the array, since the structure is defined as:
typedef struct clientBufferLimitsConfig {
unsigned long long hard_limit_bytes;
unsigned long long soft_limit_bytes;
time_t soft_limit_seconds;
} clientBufferLimitsConfig;
EVALUATION OF IMPACT:
Checking what's past the boundaries of the array in the global
'server' structure, we find AOF state fields:
clientBufferLimitsConfig client_obuf_limits[CLIENT_TYPE_OBUF_COUNT];
/* AOF persistence */
int aof_state; /* AOF_(ON|OFF|WAIT_REWRITE) */
int aof_fsync; /* Kind of fsync() policy */
char *aof_filename; /* Name of the AOF file */
int aof_no_fsync_on_rewrite; /* Don't fsync if a rewrite is in prog. */
int aof_rewrite_perc; /* Rewrite AOF if % growth is > M and... */
off_t aof_rewrite_min_size; /* the AOF file is at least N bytes. */
off_t aof_rewrite_base_size; /* AOF size on latest startup or rewrite. */
off_t aof_current_size; /* AOF current size. */
Writing to most of these fields should be harmless and only cause problems in
Redis persistence that should not escalate to security problems.
However unfortunately writing to "aof_filename" could be potentially a
security issue depending on the access pattern.
Searching for "aof.filename" accesses in the source code returns many different
usages of the field, including using it as input for open(), logging to the
Redis log file or syslog, and calling the rename() syscall.
It looks possible that attacks could lead at least to informations
disclosure of the state and data inside Redis. However note that the
attacker must already have access to the server. But, worse than that,
it looks possible that being able to change the AOF filename can be used
to mount more powerful attacks: like overwriting random files with AOF
data (easily a potential security issue as demostrated here:
http://antirez.com/news/96), or even more subtle attacks where the
AOF filename is changed to a path were a malicious AOF file is loaded
in order to exploit other potential issues when the AOF parser is fed
with untrusted input (no known issue known currently).
The fix checks the places where the 'master' class is specifiedf in
order to access configuration data structures, and return an error in
this cases.
WHO IS AT RISK?
The "master" client class was introduced in Redis in Jul 28 2015.
Every Redis instance released past this date is not vulnerable
while all the releases after this date are. Notably:
Redis 3.0.x is NOT vunlerable.
Redis 3.2.x IS vulnerable.
Redis unstable is vulnerable.
In order for the instance to be at risk, at least one of the following
conditions must be true:
1. The attacker can access Redis remotely and is able to send
the CONFIG SET command (often banned in managed Redis instances).
2. The attacker is able to control the "redis.conf" file and
can wait or trigger a server restart.
The problem was fixed 26th September 2016 in all the releases affected.
Recently we moved the "return ASAP" condition for the Delete() function
from checking .size to checking .used, which is smarter, however while
testing the first table alone always works to ensure the dict is totally
emtpy, when we test the .size field, testing .used requires testing both
T0 and T1, since a rehashing could be in progress.
This is important both to reset the magic to 0, so that it will not
match if the structure is not explicitly set, and to initialize other
things we may add like counters and such.
The size of the node depends on the node level, however it is not stored
into the node itself, is an implicit information, so we use
zmalloc_size() in order to compute the sorted set size.
The new SAMPLES option is added, defaulting to 5, and with 0 being a
special value to scan the whole set of elements.
Fixes to the object size computation were made since the original PR
assumed data structures still contaning robj structures, while now after
the lazyfree changes, are all SDS strings.
Notes by @antirez:
This patch was picked from a larger commit by Oran and adapted to change
the API a bit. The basic idea is to avoid double lookups when there is
to use the value of the deleted entry.
BEFORE:
entry = dictFind( ... ); /* 1st lookup. */
/* Do somethjing with the entry. */
dictDelete(...); /* 2nd lookup. */
AFTER:
entry = dictUnlink( ... ); /* 1st lookup. */
/* Do somethjing with the entry. */
dictFreeUnlinkedEntry(entry); /* No lookups!. */
This code was extracted from @oranagra PR #3223 and modified in order
to provide only certain amounts of information compared to the original
code. It was also moved from DEBUG to the newly introduced MEMORY
command. Thanks to Oran for the implementation and the PR.
It implements detailed memory usage stats that can be useful in both
provisioning and troubleshooting memory usage in Redis.
For most tasks, we need the memory estimation to be O(1) by default.
This commit also implements an initial MEMORY command.
Note that objectComputeSize() takes the number of samples to check as
argument, so MEMORY should be able to get the sample size as option
to make precision VS CPU tradeoff tunable.
Related to: PR #3223.
Technically as soon as Redis 64 bit gets proper support for loading
collections and/or DBs with more than 2^32 elements, the 32 bit version
should be modified in order to check if what we read from rdbLoadLen()
overflows. This would only apply to huge RDB files created with a 64 bit
instance and later loaded into a 32 bit instance.
This is an attempt at mitigating problems due to cross protocol
scripting, an attack targeting services using line oriented protocols
like Redis that can accept HTTP requests as valid protocol, by
discarding the invalid parts and accepting the payloads sent, for
example, via a POST request.
For this to be effective, when we detect POST and Host: and terminate
the connection asynchronously, the networking code was modified in order
to never process further input. It was later verified that in a
pipelined request containing a POST command, the successive commands are
not executed.
RedisModule_StringRetain() allows, when automatic memory management is
on, to keep string objects living after the callback returns. Can also
be used in order to use Redis reference counting of objects inside
modules.
The reason why this is useful is that sometimes when implementing new
data types we want to reference RedisModuleString objects inside the
module private data structures, so those string objects must be valid
after the callback returns even if not referenced inside the Redis key
space.
This feature is useful, especially in deployments using Sentinel in
order to setup Redis HA, where the slave is executed with NAT or port
forwarding, so that the auto-detected port/ip addresses, as listed in
the "INFO replication" output of the master, or as provided by the
"ROLE" command, don't match the real addresses at which the slave is
reachable for connections.
By grepping the continuous integration errors log a number of GEORADIUS
tests failures were detected.
Fortunately when a GEORADIUS failure happens, the test suite logs enough
information in order to reproduce the problem: the PRNG seed,
coordinates and radius of the query.
By reproducing the issues, three different bugs were discovered and
fixed in this commit. This commit also improves the already good
reporting of the fuzzer and adds the failure vectors as regression
tests.
The issues found:
1. We need larger squares around the poles in order to cover the area
requested by the user. There were already checks in order to use a
smaller step (larger squares) but the limit set (+/- 67 degrees) is not
enough in certain edge cases, so 66 is used now.
2. Even near the equator, when the search area center is very near the
edge of the square, the north, south, west or ovest square may not be
able to fully cover the specified radius. Now a test is performed at the
edge of the initial guessed search area, and larger squares are used in
case the test fails.
3. Because of rounding errors between Redis and Tcl, sometimes the test
signaled false positives. This is now addressed.
Whenever possible the original code was improved a bit in other ways. A
debugging example stanza was added in order to make the next debugging
session simpler when the next bug is found.
In a previous commit the replication code was changed in order to
centralize the BGSAVE for replication trigger in replicationCron(),
however after further testings, the 1 second delay imposed by this
change is not acceptable.
So now the BGSAVE is only delayed if the AOF rewriting process is
active. However past comments made sure that replicationCron() is always
able to trigger the BGSAVE when needed, making the code generally more
robust.
The new code is more similar to the initial @oranagra patch where the
BGSAVE was delayed only if an AOF rewrite was in progress.
Trivia: delaying the BGSAVE uncovered a minor Sentinel issue that is now
fixed.
During the initial handshake with the master a slave will report to have
a very high disconnection time from its master (since technically it was
disconnected since forever, so the current UNIX time in seconds is
reported).
However when the slave is connected again the Sentinel may re-scan the
INFO output again only after 10 seconds, which is a long time. During
this time Sentinels will consider this instance unable to failover, so
a useless delay is introduced.
Actaully this hardly happened in the practice because when a slave's
master is down, the INFO period for slaves changes to 1 second. However
when a manual failover is attempted immediately after adding slaves
(like in the case of the Sentinel unit test), this problem may happen.
This commit changes the INFO period to 1 second even in the case the
slave's master is not down, but the slave reported to be disconnected
from the master (by publishing, last time we checked, a master
disconnection time field in INFO).
This change is required as a result of an unrelated change in the
replication code that adds a small delay in the master-slave first
synchronization.
This patch, written in collaboration with Oran Agra (@oranagra) is a companion
to 780a8b1. Together the two patches should avoid that the AOF and RDB saving
processes can be spawned at the same time. Previously conditions that
could lead to two saving processes at the same time were:
1. When AOF is enabled via CONFIG SET and an RDB saving process is
already active.
2. When the SYNC command decides to start an RDB saving process ASAP in
order to serve a new slave that cannot partially resynchronize (but
only if we have a disk target for replication, for diskless
replication there is not such a problem).
Condition "1" is not very severe but "2" can happen often and is
definitely good at degrading Redis performances in an unexpected way.
The two commits have the effect of always spawning RDB savings for
replication in replicationCron() instead of attempting to start an RDB
save synchronously. Moreover when a BGSAVE or AOF rewrite must be
performed, they are instead just postponed using flags that will try to
perform such operations ASAP.
Finally the BGSAVE command was modified in order to accept a SCHEDULE
option so that if an AOF rewrite is in progress, when this option is
given, the command no longer returns an error, but instead schedules an
RDB rewrite operation for when it will be possible to start it.
This makes the replication code conceptually simpler by removing the
synchronous BGSAVE trigger in syncCommand(). This also means that
socket and disk BGSAVE targets are handled by the same code.
It is possible to get better results by using the pool like in the LRU
case. Also from tests during the morning I believe the current
implementation has issues in the frequency decay function that should
decrease the counter at periodic intervals.
The LRU eviction code used to make local choices: for each DB visited it
selected the best key to evict. This was repeated for each DB. However
this means that there could be DBs with very frequently accessed keys
that are targeted by the LRU algorithm while there were other DBs with
many better candidates to expire.
This commit attempts to fix this problem for the LRU policy. However the
TTL policy is still not fixed by this commit. The TTL policy will be
fixed in a successive commit.
This is an initial (partial because of TTL policy) fix for issue #2647.
To destroy and recreate the pool[].key element is slow, so we allocate
in pool[].cached SDS strings that can account up to 255 chars keys and
try to reuse them. This provides a solid 20% performance improvement
in real world workload alike benchmarks.
We start from the end of the pool to the initial item, zero-ing
every entry we use or every ghost entry, there is nothing to memmove
since to the right everything should be already set to NULL.
The rio structure is referenced in the global 'riostate' structure
in order for the logging functions to be always able to access the state
of the "pseudo-loading" of the RDB, needed for the check.
Courtesy of Valgrind.
They were under /deps since they originate from a different source tree,
however at this point they are very modified and we took ownership of
both the files making changes, fixing bugs, so there is no upgrade path
from the original code tree.
Given that, better to move the code under /src with proper dependencies
and with a more simpler editing experience.
strict_strtoll() has a bug that reports the empty string as ok and
parses it as zero.
Apparently nobody ever replaced this old call with the faster/saner
string2ll() which is used otherwise in the rest of the Redis core.
This commit close#3333.
In issues #3361 / #3365 a problem was reported / fixed with redis-cli
not updating correctly the current DB on error after SELECT.
In theory this bug was fixed in 0042fb0e, but actually the commit only
fixed the prompt updating, not the fact the state was set in a wrong
way.
This commit removes the check in the prompt update, now that hopefully
it is the state that is correct, there is no longer need for this check.
This commit both fixes the crash reported with issue #3364 and
also properly closes the old links after the Sentinel address for the
other masters gets updated.
The two problems where:
1. The Sentinel that switched address may not monitor all the masters,
it is possible that there is no match, and the 'match' variable is
NULL. Now we check for no match and 'continue' to the next master.
2. By ispecting the code because of issue "1" I noticed that there was a
problem in the code that disconnects the link of the Sentinel that
needs the address update. Basically link->disconnected is non-zero
even if just *a single link* (cc -- command link or pc -- pubsub
link) are disconnected, so to check with if (link->disconnected)
in order to close the links risks to leave one link connected.
I was able to manually reproduce the crash at "1" and verify that the
commit resolves the issue.
Close#3364.
So far we used an external program (later executed within Redis) and
parser in order to check RDB files for correctness. This forces, at each
RDB format update, to have two copies of the same format implementation
that are hard to keep in sync. Morover the former RDB checker only
checked the very high-level format of the file, without actually trying
to load things in memory. Certain corruptions can only be handled by
really loading key-value pairs.
This first commit attempts to unify the Redis RDB loadig code with the
task of checking the RDB file for correctness. More work is needed but
it looks like a sounding direction so far.
The quicklist takes a cached version of the ziplist representation size
in bytes. The implementation must update this length every time the
underlying ziplist changes. However quicklistReplaceAtIndex() failed to
fix the length.
During LSET calls, the size of the ziplist blob and the cached size
inside the quicklist diverged. Later, when this size is used in an
authoritative way, for example during nodes splitting in order to copy
the nodes, we end with a duplicated node that may contain random
garbage.
This commit should fix issue #3343, however several problems were found
reviewing the quicklist.c code in search of this bug that should be
addressed soon or later.
For example:
1. To take a cached ziplist length is fragile since failing to update it
leads to this kind of issues.
2. The node splitting code needs auditing. For example it works just for
a side effect of ziplistDeleteRange() to be able to cope with a wrong
count of elements to remove. The code inside quicklist.c assumes that
-1 means "delete till the end" while actually it's just a count of how
many elements to delete, and is an unsigned count. So -1 gets converted
into the maximum integer, and just by chance the ziplist code stops
deleting elements after there are no more to delete.
3. Node splitting is extremely inefficient, it copies the node and
removes elements from both nodes even when actually there is to move a
single entry from one node to the other, or when the new resulting node
is empty at all so there is nothing to copy but just to create a new
node.
However at least for Redis 3.2 to introduce fresh code inside
quicklist.c may be even more risky, so instead I'm writing a better
fuzzy tester to stress the internals a bit more in order to anticipate
other possible bugs.
This bug was found using a fuzzy tester written after having some clue
about where the bug could be. The tester eventually created a ~2000
commands sequence able to always crash Redis. I wrote a better version
of the tester that searched for the smallest sequence that could crash
Redis automatically. Later this smaller sequence was minimized by
removing random commands till it still crashed the server. This resulted
into a sequence of 7 commands. With this small sequence it was just a
matter of filling the code with enough printf() to understand enough
state to fix the bug.
Display the nodes summary once the cluster is established using
redis-trib.rb
After the cluster meet and join was done, when the summary was shown, it
was giving info regarding the nodes. This fix ensures that confusion
where the slaves were shown as masters.
Fix would be to reset the nodes and reload the cluster information
before checking the cluster status after creating it.
This commit changes what provided by PR #3315 (merged) in order to
let the user specify the log level as a string.
The define could be also used, but when this happens, they must be
decoupled from the defines in the Redis core, like in the other part of
the Redis modules implementations, so that a switch statement (or a
function) remaps between the two, otherwise we are no longer free to
change the internal Redis defines.
Most of the time to check the last element is the way to go, however
there are patterns where the contrary is the best choice. Zig-zag
scanning implemented in this commmit always checks the obvious element
first (the last added -- think at a loop where the last element
allocated gets freed again and again), and continues checking one
element in the head and one in the tail.
Thanks to @dvisrky that fixed the original implementation of the
function and proposed zig zag scanning.
This bug most experienced effect was an inability of Redis to
reconfigure back old masters to slaves after they are reachable again
after a failover. This was due to failing to reset the count of the
pending commands properly, so the master appeared fovever down.
Was introduced in Redis 3.2 new Sentinel connection sharing feature
which is a lot more complex than the 3.0 code, but more scalable.
Many thanks to people reporting the issue, and especially to
@sskorgal for investigating the issue in depth.
Hopefully closes#3285.
I recently introduced populating the autocomplete help array with the
COMMAND command if available. However this was performed before parsing
the arguments, defaulting to instance 6379. After the connection is
performed it remains stable.
The effect is that if there is an instance running on port 6339,
whatever port you specify is ignored and 6379 is connected to instead.
The right port will be selected only after a reconnection.
Close#3314.
Reference issue #3218.
Checking the code I can't find a reason why the original RESTORE
code was so opinionated about restoring only the current version. The
code in to `rdb.c` appears to be capable as always to restore data from
older versions of Redis, and the only places where it is needed the
current version in order to correctly restore data, is while loading the
opcodes, not the values itself as it happens in the case of RESTORE.
For the above reasons, this commit enables RESTORE to accept older
versions of values payloads.
Comment format fixed + local var modified from camel case to underscore
separators as Redis code base normally does (camel case is mostly used
for global symbols like structure names, function names, global vars,
...).
Now that modules receive RedisModuleString objects on loading, they are
allowed to call the String API, so the context must be released
correctly.
Related to #3293.
All lists are now represented via quicklists.
Quicklists are never represented referencing robj structures, so trying
to compress their representation does not make sense. That the new way
is faster was experimentally verified with micro benchmarks in order to
prove that the intuition was correct.
Probably there is no compiler that will actaully break the code or raise
a signal for unsigned -> signed overflowing conversion, still it was
apparently possible to write it in a more correct way.
All tests passing.
