When redis-cli received ASK, it used string matching wrong and didn't
handle it.
When we access a slot which is in migrating state, it maybe
return ASK. After redirect to the new node, we need send ASKING
command before retry the command. In this PR after redis-cli receives
ASK, we send a ASKING command before send the origin command
after reconnecting.
Other changes:
* Make redis-cli -u and -c (unix socket and cluster mode) incompatible
with one another.
* When send command fails, we avoid the 2nd reconnect retry and just
print the error info. Users will decide how to do next.
See #9277.
* Add a test faking two redis nodes in TCL to just send ASK and OK in
redis protocol to test ASK behavior.
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
Co-authored-by: Oran Agra <oran@redislabs.com>
Add NX, XX, GT, and LT flags to EXPIRE, PEXPIRE, EXPIREAT, PEXAPIREAT.
- NX - only modify the TTL if no TTL is currently set
- XX - only modify the TTL if there is a TTL currently set
- GT - only increase the TTL (considering non-volatile keys as infinite expire time)
- LT - only decrease the TTL (considering non-volatile keys as infinite expire time)
return value of the command is 0 when the operation was skipped due to one of these flags.
Signed-off-by: Ning Sun <sunng@protonmail.com>
Fixes:
- When a consumer is created as a side effect, redis didn't issue a keyspace notification,
nor incremented the server.dirty (affects periodic snapshots).
this was a bug in XREADGROUP, XCLAIM, and XAUTOCLAIM.
- When attempting to delete a non-existent consumer, don't issue a keyspace notification
and don't increment server.dirty
this was a bug in XGROUP DELCONSUMER
Other changes:
- Changed streamLookupConsumer() to always only do lookup consumer (never do implicit creation),
Its last seen time is updated unless the SLC_NO_REFRESH flag is specified.
- Added streamCreateConsumer() to create a new consumer. When the creation is successful,
it will notify and dirty++ unless the SCC_NO_NOTIFY or SCC_NO_DIRTIFY flags is specified.
- Changed streamDelConsumer() to always only do delete consumer.
- Added keyspace notifications tests about stream events.
With an empty src key, we need to deal with two situations:
1. non-STORE: We should return emptyarray.
2. STORE: Try to delete the store key and return 0.
This applies to both GEOSEARCHSTORE (new to v6.2), and
also GEORADIUS STORE (which was broken since forever)
This pr try to fix#9261. i.e. both STORE variants would have behaved
like the non-STORE variants when the source key was missing,
returning an empty array and not deleting the destination key,
instead of returning 0, and deleting the destination key.
Also add more tests for some commands.
- GEORADIUS: wrong type src key, non existing src key, empty search,
store with non existing src key, store with empty search
- GEORADIUSBYMEMBER: wrong type src key, non existing src key,
non existing member, store with non existing src key
- GEOSEARCH: wrong type src key, non existing src key, empty search,
frommember with non existing member
- GEOSEARCHSTORE: wrong type key, non existing src key,
fromlonlat with empty search, frommember with non existing member
Co-authored-by: Oran Agra <oran@redislabs.com>
In some cases large replies on slow systems may only be partially read
by the test suite, resulting with parsing errors.
This fix is still timing sensitive but should greatly reduce the chances
of this happening.
The issue is that when a sentinel with the same address and IP is turned on with a different runid, its port is set to 0 but it is still present in the dictionary master->sentinels which contain all the sentinels for a master.
This causes a problem when we do INFO SENTINEL because it takes the size of the dictionary of sentinels. This might also cause a problem for failover if enough sentinels have their port set to 0 since the number of voters in failover is also determined by the size of the dictionary of sentinels.
This commits removes the sentinels with the port set to zero from the dictionary of sentinels.
Fixes#8786
GETBIT, SETBIT may access wrong address because of wrap.
BITCOUNT and BITPOS may return wrapped results.
BITFIELD may access the wrong address but also allocate insufficient memory and segfault (see CVE-2021-32761).
This commit uses `uint64_t` or `long long` instead of `size_t`.
related https://github.com/redis/redis/pull/8096
At 32bit platform:
> setbit bit 4294967295 1
(integer) 0
> config set proto-max-bulk-len 536870913
OK
> append bit "\xFF"
(integer) 536870913
> getbit bit 4294967296
(integer) 0
When the bit index is larger than 4294967295, size_t can't hold bit index. In the past, `proto-max-bulk-len` is limit to 536870912, so there is no problem.
After this commit, bit position is stored in `uint64_t` or `long long`. So when `proto-max-bulk-len > 536870912`, 32bit platforms can still be correct.
For 64bit platform, this problem still exists. The major reason is bit pos 8 times of byte pos. When proto-max-bulk-len is very larger, bit pos may overflow.
But at 64bit platform, we don't have so long string. So this bug may never happen.
Additionally this commit add a test cost `512MB` memory which is tag as `large-memory`. Make freebsd ci and valgrind ci ignore this test.
- promote the code in DEBUG PROTOCOL to addReplyBigNum
- DEBUG PROTOCOL ATTRIB skips the attribute when client is RESP2
- networking.c addReply for push and attributes generate assertion when
called on a RESP2 client, anything else would produce a broken
protocol that clients can't handle.
There are two issues fixed in this commit:
1. we want to fail the EXEC command in case there is a watched key that's logically
expired but not yet deleted by active expire or lazy expire.
2. we saw that currently cache time is update in every `call()` (including nested calls),
this time is being also being use for the isKeyExpired comparison, we want to update
the cache time only in the first call (execCommand)
Co-authored-by: Oran Agra <oran@redislabs.com>
1. redis-cli can output --rdb data to stdout
but redis-cli also write some messages to stdout which will mess up the rdb.
2. Make redis-cli flush stdout when printing a reply
This was needed in order to fix a hung in redis-cli test that uses
--replica.
Note that printf does flush when there's a newline, but fwrite does not.
3. fix the redis-cli --replica test which used to pass previously
because it didn't really care what it read, and because redis-cli
used printf to print these other things to stdout.
4. improve redis-cli --replica test to run with both diskless and disk-based.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Viktor Söderqvist <viktor@zuiderkwast.se>
due to a copy-paste bug, it used to reply with null response rather than empty array.
this commit includes new tests that are looking at the RESP response directly in
order to be able to tell the difference between them.
Co-authored-by: Oran Agra <oran@redislabs.com>
fixes test issue introduced in #9167
1. invalid reads due to accessing non-retained string (passed as unblock context).
2. leaking module blocked client context, see #6922 for info.
Modules that use background threads with thread safe contexts are likely
to use RM_BlockClient() without a timeout function, because they do not
set up a timeout.
Before this commit, `CLIENT UNBLOCK` would result with a crash as the
`NULL` timeout callback is called. Beyond just crashing, this is also
logically wrong as it may throw the module into an unexpected client
state.
This commits makes `CLIENT UNBLOCK` on such clients behave the same as
any other client that is not in a blocked state and therefore cannot be
unblocked.
*** [err]: PSYNC2: total sum of full synchronizations is exactly 4 intests/integration/psync2.tcl
Expected 5 == 4 (context: type eval line 8 cmd {assert {$sum == 4}} proc::test)
Sometime the test got an unexpected full sync since a replica switch to master,
before the new master change propagated the new replid to all replicas,
a replica attempted to sync with it using a wrong replid and triggered a full resync.
Consider this scenario:
1 slaveof 4 full resync
0 slaveof 4 full resync
2 slaveof 0 full resync
3 slaveof 1 full resync
1 slaveof no one, replid changed
3 reconnect 1, did a partial resyn and got the new replid
Before 2 inherits the new replid.
3 slaveof 2
3 try to do a partial resyn with 2.
But their replication ids are inconsistent, so a full resync happens.
:) A special thank you for oran and helping me in this test case.
Co-authored-by: Oran Agra <oran@redislabs.com>
Return a bad score when used with negative count (or count of 1), and non-ziplist encoded zset.
Also add test to validate the return value and cover the issue.
In the past, the first bind address that was explicitly specified was
also used to bind outgoing connections. This could result with some
problems. For example: on some systems using `bind 127.0.0.1` would
result with outgoing connections also binding to `127.0.0.1` and failing
to connect to remote addresses.
With the recent change to the way `bind` is handled, this presented
other issues:
* The default first bind address is '*' which is not a valid address.
* We make no distinction between user-supplied config that is identical
to the default, and the default config.
This commit addresses both these issues by introducing an explicit
configuration parameter to control the bind address on outgoing
connections.
- Introduce a new sdssubstr api as a building block for sdsrange.
The API of sdsrange is many times hard to work with and also has
corner case that cause bugs. sdsrange is easy to work with and also
simplifies the implementation of sdsrange.
- Revert the fix to RM_StringTruncate and just use sdssubstr instead of
sdsrange.
- Solve valgrind warnings from the new tests introduced by the previous
PR.
* Specifying an empty `bind ""` configuration prevents Redis from listening on any TCP port. Before this commit, such configuration was not accepted.
* Using `CONFIG GET bind` will always return an explicit configuration value. Before this commit, if a bind address was not specified the returned value was empty (which was an anomaly).
Another behavior change is that modifying the `bind` configuration to a non-default value will NO LONGER DISABLE protected-mode implicitly.
Previously, passing 0 for newlen would not truncate the string at all.
This adds handling of this case, freeing the old string and creating a new empty string.
Other changes:
- Move `src/modules/testmodule.c` to `tests/modules/basics.c`
- Introduce that basic test into the test suite
- Add tests to cover StringTruncate
- Add `test-modules` build target for the main makefile
- Extend `distclean` build target to clean modules too
# replication-3.tcl
had a test timeout failure with valgrind on daily CI:
```
*** [err]: SLAVE can reload "lua" AUX RDB fields of duplicated scripts in tests/integration/replication-3.tcl
Replication not started.
```
replication took more than 70 seconds.
https://github.com/redis/redis/runs/2854037905?check_suite_focus=true
on my machine it takes only about 30, but i can see how 50 seconds isn't enough.
# replication.tcl
loading was over too quickly in freebsd daily CI:
```
*** [err]: slave fails full sync and diskless load swapdb recovers it in tests/integration/replication.tcl
Expected '0' to be equal to '1' (context: type eval line 44 cmd {assert_equal [s -1 loading] 1} proc ::start_server)
```
# rdb.tcl
loading was over too quickly.
increase the time loading takes, and decrease the amount of work we try to achieve in that time.
The `Tracking gets notification of expired keys` test in tracking.tcl
used to hung in valgrind CI quite a lot.
It turns out the reason is that with valgrind and a busy machine, the
server cron active expire cycle could easily run in the same event loop
as the command that created `mykey`, so that when they key got expired,
there were two change events to broadcast, one that set the key and one
that expired it, but since we used raxTryInsert, the client that was
associated with the "last" change was the one that created the key, so
the NOLOOP filtered that event.
This commit adds a test that reproduces the problem by using lazy expire
in a multi-exec which makes sure the key expires in the same event loop
as the one that added it.
Fix test failure which introduced by #9003.
The following case will occur when querybuf expansion will allocate memory equal to (16*1024)k.
1) make use ```CFLAGS=-DNO_MALLOC_USABLE_SIZE```.
2) ```malloc``` will not allocate more under ```alpine```.
Create new module type enhanced callbacks: mem_usage2, free_effort2, unlink2, copy2.
These will be given a context point from which the module can obtain the key name and database id.
In addition the digest and defrag context can now be used to obtain the key name and database id.
When using RESP3, ZPOPMAX/ZPOPMIN should return nested arrays for consistency
with other commands (e.g. ZRANGE).
We do that only when COUNT argument is present (similarly to how LPOP behaves).
for reasoning see https://github.com/redis/redis/issues/8824#issuecomment-855427955
This is a breaking change only when RESP3 is used, and COUNT argument is present!
The initialize memory of `querybuf` is `PROTO_IOBUF_LEN(1024*16) * 2` (due to sdsMakeRoomFor being greedy), under `jemalloc`, the allocated memory will be 40k.
This will most likely result in the `querybuf` being resized when call `clientsCronResizeQueryBuffer` unless the client requests it fast enough.
Note that this bug existed even before #7875, since the condition for resizing includes the sds headers (32k+6).
## Changes
1. Use non-greedy sdsMakeRoomFor when allocating the initial query buffer (of 16k).
1. Also use non-greedy allocation when working with BIG_ARG (we won't use that extra space anyway)
2. in case we did use a greedy allocation, read as much as we can into the buffer we got (including internal frag), to reduce system calls.
3. introduce a dedicated constant for the shrinking (same value as before)
3. Add test for querybuf.
4. improve a maxmemory test by ignoring the effect of replica query buffers (can accumulate many ACKs on slow env)
5. improve a maxmemory by disabling slowlog (it will cause slight memory growth on slow env).
Today when we load the AOF on startup, the loadAppendOnlyFile checks if
the file is openning for reading.
This check is redundent (dead code) as we open the AOF file for writing at initServer,
and the file will always be existing for the loadAppendOnlyFile.
In this commit:
- remove all the exit(1) from loadAppendOnlyFile, as it is the caller
responsibility to decide what to do in case of failure.
- move the opening of the AOF file for writing, to be after we loading it.
- avoid return -ERR in DEBUG LOADAOF, when the AOF is existing but empty
SINTERSTORE would have deleted the dest key right away,
even when later on it is bound to fail on an (WRONGTYPE) error.
With this change it first picks up all the input keys, and only later
delete the dest key if one is empty.
Also add more tests for some commands.
Mainly focus on
- `wrong type error`:
expand test case (base on sinter bug) in non-store variant
add tests for store variant (although it exists in non-store variant, i think it would be better to have same tests)
- the dstkey result when we meet `non-exist key (empty set)` in *store
sdiff:
- improve test case about wrong type error (the one we found in sinter, although it is safe in sdiff)
- add test about using non-exist key (treat it like an empty set)
sdiffstore:
- according to sdiff test case, also add some tests about `wrong type error` and `non-exist key`
- the different is that in sdiffstore, we will consider the `dstkey` result
sunion/sunionstore add more tests (same as above)
sinter/sinterstore also same as above ...
The root cause is that one test (`5 keys in, 5 keys out`) is leaking a volatile key
that can expire while another later test(`All TTL in commands are propagated
as absolute timestamp in replication stream`) is running.
Such leaked expiration injects an unexpected `DEL` command into the
replication command during the later test, causing it to fail.
The fixes are two fold:
1. Plug the leak in the first test.
2. Add FLUSHALL to the later test, to avoid future interference from other tests.
This PR adds a spell checker CI action that will fail future PRs if they introduce typos and spelling mistakes.
This spell checker is based on blacklist of common spelling mistakes, so it will not catch everything,
but at least it is also unlikely to cause false positives.
Besides that, the PR also fixes many spelling mistakes and types, not all are a result of the spell checker we use.
Here's a summary of other changes:
1. Scanned the entire source code and fixes all sorts of typos and spelling mistakes (including missing or extra spaces).
2. Outdated function / variable / argument names in comments
3. Fix outdated keyspace masks error log when we check `config.notify-keyspace-events` in loadServerConfigFromString.
4. Trim the white space at the end of line in `module.c`. Check: https://github.com/redis/redis/pull/7751
5. Some outdated https link URLs.
6. Fix some outdated comment. Such as:
- In README: about the rdb, we used to said create a `thread`, change to `process`
- dbRandomKey function coment (about the dictGetRandomKey, change to dictGetFairRandomKey)
- notifyKeyspaceEvent fucntion comment (add type arg)
- Some others minor fix in comment (Most of them are incorrectly quoted by variable names)
7. Modified the error log so that users can easily distinguish between TCP and TLS in `changeBindAddr`
This commit revives the improves the ability to run the test suite against
external servers, instead of launching and managing `redis-server` processes as
part of the test fixture.
This capability existed in the past, using the `--host` and `--port` options.
However, it was quite limited and mostly useful when running a specific tests.
Attempting to run larger chunks of the test suite experienced many issues:
* Many tests depend on being able to start and control `redis-server` themselves,
and there's no clear distinction between external server compatible and other
tests.
* Cluster mode is not supported (resulting with `CROSSSLOT` errors).
This PR cleans up many things and makes it possible to run the entire test suite
against an external server. It also provides more fine grained controls to
handle cases where the external server supports a subset of the Redis commands,
limited number of databases, cluster mode, etc.
The tests directory now contains a `README.md` file that describes how this
works.
This commit also includes additional cleanups and fixes:
* Tests can now be tagged.
* Tag-based selection is now unified across `start_server`, `tags` and `test`.
* More information is provided about skipped or ignored tests.
* Repeated patterns in tests have been extracted to common procedures, both at a
global level and on a per-test file basis.
* Cleaned up some cases where test setup was based on a previous test executing
(a major anti-pattern that repeats itself in many places).
* Cleaned up some cases where test teardown was not part of a test (in the
future we should have dedicated teardown code that executes even when tests
fail).
* Fixed some tests that were flaky running on external servers.
Till now GET and NX were mutually exclusive.
This change make their combination mean a "Get or Set" command.
If the key exists it returns the old value and avoids setting,
and if it does't exist it returns nil and sets it to the new value (possibly with expiry time)
