This PR mainly fixes a possible integer overflow in `json_append_string()`.
When we use `cjson.encoding()` to encode a string larger than 2GB, at specific
compilation flags, an integer overflow may occur leading to truncation, resulting
in the part of the string larger than 2GB not being encoded.
On the other hand, this overflow doesn't cause any read or write out-of-range or segment fault.
1) using -O0 for lua_cjson (`make LUA_DEBUG=yes`)
In this case, `i` will overflow and leads to truncation.
When `i` reaches `INT_MAX+1` and overflows to INT_MIN, when compared to
len, `i` (1000000..00) is expanded to 64 bits signed integer (1111111.....000000) .
At this point i will be greater than len and jump out of the loop, so `for (i = 0; i < len; i++)`
will loop up to 2^31 times, and the part of larger than 2GB will be truncated.
```asm
`i` => -0x24(%rbp)
<+253>: addl $0x1,-0x24(%rbp) ; overflow if i large than 2^31
<+257>: mov -0x24(%rbp),%eax
<+260>: movslq %eax,%rdx ; move a 32-bit value with sign extension into a 64-bit signed
<+263>: mov -0x20(%rbp),%rax
<+267>: cmp %rax,%rdx ; check `i < len`
<+270>: jb 0x212600 <json_append_string+148>
```
2) using -O2/-O3 for lua_cjson (`make LUA_DEBUG=no`, **the default**)
In this case, because singed integer overflow is an undefined behavior, `i` will not overflow.
`i` will be optimized by the compiler and use 64-bit registers for all subsequent instructions.
```asm
<+180>: add $0x1,%rbx ; Using 64-bit register `rbx` for i++
<+184>: lea 0x1(%rdx),%rsi
<+188>: mov %rsi,0x10(%rbp)
<+192>: mov %al,(%rcx,%rdx,1)
<+195>: cmp %rbx,(%rsp) ; check `i < len`
<+199>: ja 0x20b63a <json_append_string+154>
```
3) using 32bit
Because `strbuf_ensure_empty_length()` preallocates memory of length (len * 6 + 2),
in 32-bit `cjson.encode()` can only handle strings smaller than ((2 ^ 32) - 3 ) / 6.
So 32bit is not affected.
Also change `i` in `strbuf_append_string()` to `size_t`.
Since its second argument `str` is taken from the `char2escape` string array which is never
larger than 6, so `strbuf_append_string()` is not at risk of overflow (the bug was unreachable).
GEOHASH / GEODIST / GEOPOS use zsetScore to get the score, in skiplist encoding,
we use dictFind to get the score, which is O(1), same as ZSCORE command.
It is not clear why these commands had O(Log(N)), and O(N) until now.
When loading a function from either RDB/AOF or a replica, it is essential not to
fail on timeout errors. The loading time may vary due to various factors, such as
hardware specifications or the system's workload during the loading process.
Once a function has been successfully loaded, it should be allowed to load from
persistence or on replicas without encountering a timeout failure.
To maintain a clear separation between the engine and Redis internals, the
implementation refrains from directly checking the state of Redis within the
engine itself. Instead, the engine receives the desired timeout as part of the
library creation and duly respects this timeout value. If Redis wishes to disable
any timeout, it can simply send a value of 0.
When doing merge selector, we should check whether the merge
has started (i.e., whether open_bracket_start is -1) every time.
Otherwise, encountering an illegal selector pattern could succeed
and also cause memory leaks, for example:
```
acl setuser test1 (+PING (+SELECT (+DEL )
```
The above would leak memory and succeed with only DEL being applied,
and would now error after the fix.
Co-authored-by: Oran Agra <oran@redislabs.com>
Additional test coverage for incr/decr operation.
integer number could be present in raw encoding format due to operation like append. A incr/decr operation following it optimize the string to int encoding format.
A bug introduced in #11657 (7.2 RC1), causes client-eviction (#8687)
and INFO to have inaccurate memory usage metrics of MONITOR clients.
Because the type in `c->type` and the type in `getClientType()` are confusing
(in the later, `CLIENT_TYPE_NORMAL` not `CLIENT_TYPE_SLAVE`), the comment
we wrote in `updateClientMemUsageAndBucket` was wrong, and in fact that function
didn't skip monitor clients.
And since it doesn't skip monitor clients, it was wrong to delete the call for it from
`replicationFeedMonitors` (it wasn't a NOP).
That deletion could mean that the monitor client memory usage is not always up to
date (updated less frequently, but still a candidate for client eviction).
changing the response and request policy of a few commands,
see https://redis.io/docs/reference/command-tips
1. RANDOMKEY used to have no response policy, which means
that when sent to multiple shards, the responses should be aggregated.
this normally applies to commands that return arrays, but since RANDOMKEY
replies with a simple string, it actually requires a SPECIAL response policy
(for the client to select just one)
2. SCAN used to have no response policy, but although the key names part of
the response can be aggregated, the cursor part certainly can't.
3. MSETNX had a request policy of MULTI_SHARD and response policy of AGG_MIN,
but in fact the contract with MSETNX is that when one key exists, it returns 0
and doesn't set any key, routing it to multiple shards would mean that if one failed
and another succeeded, it's atomicity is broken and it's impossible to return a valid
response to the caller.
Co-authored-by: Shachar Langbeheim <shachlan@amazon.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
When the redis server cluster running on cluster-preferred-endpoint-type unknown-endpoint mode, and receive a request that should be redirected to another redis server node, it does not reply the hostip, but a empty host like MOVED 3999 :6381.
The redis-cli would try to connect to an address without a host, which cause the issue:
```
127.0.0.1:7002> set bar bar
-> Redirected to slot [5061] located at :7000
Could not connect to Redis at :7000: No address associated with hostname
Could not connect to Redis at :7000: No address associated with hostname
not connected> exit
```
In this case, the redis-cli should use the previous hostip when there's no host provided by the server.
---------
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
Co-authored-by: Madelyn Olson <madelynolson@gmail.com>
According to the format shown in https://redis.io/commands/cluster-nodes/
```
<ip:port@cport[,hostname[,auxiliary_field=value]*]>
```
when there is no hostname, and the auxiliary fields are hidden, the cluster topology should be
```
<ip:port@cport>
```
However in the code we always print the hostname even when it is an empty string, leaving an unnecessary comma tailing after cport, which is weird and conflicts with the doc.
```
94ca2f6cf85228a49fde7b738ee1209de7bee325 127.0.0.1:6379@16379, myself,master - 0 0 0 connected 0-16383
```
60e5075d4 Version 1.2.0 (#1202)
adef139a7 Remove support in deprecated TLS versions 1.0 and 1.1 (#1205)
d543baba6 Install major version symlink of shared objects.
052f99ab2 Ensure functionality without _MSC_VER definition
ded32c7d1 Add a test for the TCP_USER_TIMEOUT option. (#1192)
5cbd1f296 Add -Werror as a default. (#1193)
af1445638 CI: Update homebrew Redis version. (#1191)
6de326e87 Fix a typo in b6a052f.
git-subtree-dir: deps/hiredis
git-subtree-split: 60e5075d4ac77424809f855ba3e398df7aacefe8
* Fix integer overflows due to using wrong integer size.
* Add assertions / panic when overflow still happens.
* Deletion of dead code to avoid need to maintain it
* Some changes are not because of bugs, but rather paranoia.
* Improve cmsgpack and cjson test coverage.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
valgrind report a Uninitialised warning:
```
==25508== Uninitialised value was created by a heap allocation
==25508== at 0x4848899: malloc (in
/usr/libexec/valgrind/vgpreload_memcheck-amd64-linux.so)
==25508== by 0x1A35A1: ztrymalloc_usable_internal (zmalloc.c:117)
==25508== by 0x1A368D: zmalloc (zmalloc.c:145)
==25508== by 0x21FDEA: clusterInit (cluster.c:973)
==25508== by 0x19DC09: main (server.c:7306)
```
Introduced in #12344
This is an addition to #12380, to prevent potential bugs when collecting
keys from multiple commands in the future.
Note that this function also resets numkeys in some cases.
Process loss of slot ownership in cluster bus
When a node no longer owns a slot, it clears the bit corresponding
to the slot in the cluster bus messages. The receiving nodes
currently don't record the fact that the sender stopped claiming
a slot until some other node in the cluster starts claiming the slot.
This can cause a slot to go missing during slot migration when subjected
to inopportune race with addition of new shards or a failover.
This fix forces the receiving nodes to process the loss of ownership
to avoid spreading wrong information.
The test fails on freebsd CI:
```
*** [err]: stats: eventloop metrics in tests/unit/info.tcl
Expected '31777' to be less than '16183' (context: type eval line 17 cmd
{assert_lessthan $el_sum2 [expr $el_sum1+10000] } proc ::test)
```
The test added in #11963, fails on freebsd CI which is slow,
increase tollerance and also add some verbose logs, now we can
see these logs in verbose mode (for better views):
```
eventloop metrics cycle1: 12, cycle2: 15
eventloop metrics el_sum1: 315, el_sum2: 411
eventloop metrics cmd_sum1: 126, cmd_sum2: 137
[ok]: stats: eventloop metrics (111 ms)
instantaneous metrics instantaneous_eventloop_cycles_per_sec: 8
instantaneous metrics instantaneous_eventloop_duration_usec: 55
[ok]: stats: instantaneous metrics (1603 ms)
[ok]: stats: debug metrics (112 ms)
```
When getKeysUsingKeySpecs processes a command with more than one key-spec,
and called with a total of more than 256 keys, it'll call getKeysPrepareResult again,
but since numkeys isn't updated, getKeysPrepareResult will not bother to copy key
names from the old result (leaving these slots uninitialized). Furthermore, it did not
consider the keys it already found when allocating more space.
Co-authored-by: Oran Agra <oran@redislabs.com>
The negative offset check was added in #9052, we realized
that this is a non-mandatory breaking change and we would
like to add it only in 8.0.
This reverts PR #9052, will be re-introduced later in 8.0.
Optimized the performance of the SCAN command in a few ways:
1. Move the key filtering (by MATCH pattern) in the scan callback,
so as to avoid collecting them for later filtering.
2. Reduce a many memory allocations and copying (use a reference
to the original sds, instead of creating an robj, an excessive 2 mallocs
and one string duplication)
3. Compare TYPE filter directly (as integers), instead of inefficient string
compare per key.
4. fixed a small bug: when scan zset and hash types, maxiterations uses
a more accurate number to avoid wrong double maxiterations.
Changes **postponed** for a later version (8.0):
1. Prepare to move the TYPE filtering to the scan callback as well. this was
put on hold since it has side effects that can be considered a breaking
change, which is that we will not attempt to do lazy expire (delete) a key
that was filtered by not matching the TYPE (changing it would mean TYPE filter
starts behaving the same as MATCH filter already does in that respect).
2. when the specified key TYPE filter is an unknown type, server will reply a error
immediately instead of doing a full scan that comes back empty handed.
Benchmark result:
For different scenarios, we obtained about 30% or more performance improvement.
Co-authored-by: Oran Agra <oran@redislabs.com>
Added missing O3 flag to linking stage in default option "-O3 -flto".
Flags doesn't lead to significant changes in performance:
- +0.21% in geomean for all benchmarks on ICX bare-metal (256 cpus)
- +0.33% in geomean for all benchmarks on m6i.2xlarge (16 cpus)
Checked on redis from Mar'30 (commit 1f76bb17dd ). Comparison file is attached.
aof-disable-auto-gc was created for testing purposes,
to check if certain AOF files were actually generated
and if they were deletedcorrectly during testing.
So hiding it, see #12249 for more discussion.
Originally, when "tls-cluster" is enabled, `port` is set to TLS port. In order to support non-TLS clients, `pport` is used to propagate TCP port across cluster nodes. However when "tls-cluster" is disabled, `port` is set to TCP port, and `pport` is not used, which means the cluster cannot provide TLS service unless "tls-cluster" is on.
```
typedef struct {
// ...
uint16_t port; /* Latest known clients port (TLS or plain). */
uint16_t pport; /* Latest known clients plaintext port. Only used if the main clients port is for TLS. */
// ...
} clusterNode;
```
```
typedef struct {
// ...
uint16_t port; /* TCP base port number. */
uint16_t pport; /* Sender TCP plaintext port, if base port is TLS */
// ...
} clusterMsg;
```
This PR renames `port` and `pport` in `clusterNode` to `tcp_port` and `tls_port`, to record both ports no matter "tls-cluster" is enabled or disabled.
This allows to provide TLS service to clients when "tls-cluster" is disabled: when displaying cluster topology, or giving `MOVED` error, server can provide TLS or TCP port according to client's connection type, no matter what type of connection cluster bus is using.
For backwards compatibility, `port` and `pport` in `clusterMsg` are preserved, when "tls-cluster" is enabled, `port` is set to TLS port and `pport` is set to TCP port, when "tls-cluster" is disabled, `port` is set to TCP port and `pport` is set to TLS port (instead of 0).
Also, in the nodes.conf file, a new aux field displaying an extra port is added to complete the persisted info. We may have `tls_port=xxxxx` or `tcp_port=xxxxx` in the aux field, to complete the cluster topology, while the other port is stored in the normal `<ip>:<port>` field. The format is shown below.
```
<node-id> <ip>:<tcp_port>@<cport>,<hostname>,shard-id=...,tls-port=6379 myself,master - 0 0 0 connected 0-1000
```
Or we can switch the position of two ports, both can be correctly resolved.
```
<node-id> <ip>:<tls_port>@<cport>,<hostname>,shard-id=...,tcp-port=6379 myself,master - 0 0 0 connected 0-1000
```
The new blockedBeforeSleep was added in #12337, it breaks the order in 2ecb5ed.
This may be related to #2288, quoted from comment in #2288:
```
Moreover the clusterBeforeSleep() call was misplaced at the end of the chain of the
beforeSleep() call in redis.c. It should be at the top, before processing un blocking
clients. This is exactly the reason in the specific instance of the bug as reported,
why the state was not updated in time before clients served.
```
blocking RM_Call was introduced on: #11568, It allows a module to perform
blocking commands and get the reply asynchronously.If the command gets
block, a special promise CallReply is returned that allow to set the unblock
handler. The unblock handler will be called when the command invocation
finish and it gets, as input, the command real reply.
The issue was that the real CallReply was created using a stack allocated
RedisModuleCtx which is no longer available after the unblock handler finishes.
So if the module keeps the CallReply after the unblock handler finished, the
CallReply holds a pointer to invalid memory and will try to access it when the
CallReply will be released.
The solution is to create the CallReply with a NULL context to make it totally
detached and can be freed freely when the module wants.
Test was added to cover this case, running the test with valgrind before the
fix shows the use after free error. With the fix, there are no valgrind errors.
unrelated: adding a missing `$rd close` in many tests in that file.
Apart from adding the missing coverage, this PR also adds `blockedBeforeSleep`
that gathers all block-related functions from `beforeSleep`
The order inside `blockedBeforeSleep` is different: now `handleClientsBlockedOnKeys`
(which may unblock clients) is called before `processUnblockedClients` (which handles
unblocked clients).
It makes sense to have this order.
There are no visible effects of the wrong ordering, except some cleanups of the now-unblocked
client would have happen in the next `beforeSleep` (will now happen in the current one)
The reason we even got into it is because i triggers an assertion in logresreq.c (breaking
the assumption that `unblockClient` is called **before** actually flushing the reply to the socket):
`handleClientsBlockedOnKeys` is called, then it calls `moduleUnblockClientOnKey`, which calls
`moduleUnblockClient`, which adds the client to `moduleUnblockedClients` back to `beforeSleep`,
we call `handleClientsWithPendingWritesUsingThreads`, it writes the data of buf to the client, so
`client->bufpos` became 0
On the next `beforeSleep`, we call `moduleHandleBlockedClients`, which calls `unblockClient`,
which calls `reqresAppendResponse`, triggering the assert. (because the `bufpos` is 0) - see https://github.com/redis/redis/pull/12301#discussion_r1226386716
To determine when everything was stable, we couldn't just query the nodename since they aren't API visible by design. Instead, we were using a proxy piece of information which was bumping the epoch and waiting for everyone to observe that. This works for making source Node 0 and Node 1 had pinged, and Node 0 and Node 2 had pinged, but did not guarantee that Node 1 and Node 2 had pinged. Although unlikely, this can cause this failure message. To fix it I hijacked hostnames and used its validation that it has been propagated, since we know that it is stable.
I also noticed while stress testing this sometimes the test took almost 4.5 seconds to finish, which is really close to the current 5 second limit of the log check, so I bumped that up as well just to make it a bit more consistent.
Introduced by https://github.com/redis/redis/pull/11923 (Redis 7.2 RC2)
It's very weird and counterintuitive that `RM_ReplyWithError` requires the error-code
**without** a hyphen while `RM_ReplyWithErrorFormat` requires either the error-code
**with** a hyphen or no error-code at all
```
RedisModule_ReplyWithError(ctx, "BLA bla bla");
```
vs.
```
RedisModule_ReplyWithErrorFormat(ctx, "-BLA %s", "bla bla");
```
This commit aligns RM_ReplyWithErrorFormat to behvae like RM_ReplyWithError.
it's a breaking changes but it's done before 7.2 goes GA.
When a connection that's subscribe to a channel emits PUBLISH inside MULTI-EXEC,
the push notification messes up the EXEC response.
e.g. MULTI, PING, PUSH foo bar, PING, EXEC
the EXEC's response will contain: PONG, {message foo bar}, 1. and the second PONG
will be delivered outside the EXEC's response.
Additionally, this PR changes the order of responses in case of a plain PUBLISH (when
the current client also subscribed to it), by delivering the push after the command's
response instead of before it.
This also affects modules calling RM_PublishMessage in a similar way, so that we don't
run the risk of getting that push mixed together with the module command's response.
A value of type long long is always less than 21 bytes when convert to a
string, so always meets the conditions for using embedded string object
which can always get memory reduction and performance gain (less calls
to the heap allocator).
Additionally, for the conversion of longlong type to sds, we also use a faster
algorithm (the one in util.c instead of the one that used to be in sds.c).
For the DECR command on 32-bit Redis, we get about a 5.7% performance
improvement. There will also be some performance gains for some commands
that heavily use sdscatfmt to convert numbers, such as INFO.
Co-authored-by: Oran Agra <oran@redislabs.com>
Now we will check the offset in zrangeGenericCommand.
With a negative offset, we will throw an error and return.
This also resolve the issue of zeroing the destination key
in case of the "store" variant when we input a negative offset.
```
127.0.0.1:6379> set key value
OK
127.0.0.1:6379> zrangestore key myzset 0 10 byscore limit -1 10
(integer) 0
127.0.0.1:6379> exists key
(integer) 0
```
This change affects the following commands:
- ZRANGE / ZRANGESTORE / ZRANGEBYLEX / ZRANGEBYSCORE
- ZREVRANGE / ZREVRANGEBYSCORE / ZREVRANGEBYLEX
For geosearch and georadius we have already test coverage for wrong type, but we dont have for geodist, geohash, geopos commands. So adding the wrong type test cases for geodist, geohash, geopos commands.
Existing code, we have verify_geo_edge_response_bymember function for wrong type test cases which has member as an option. But the function is being called in other test cases where the output is not inline with these commnds(geodist, geohash, geopos). So I could not include these commands(geodist, geohash, geopos) as part of existing function, hence implemented a new function verify_geo_edge_response_generic and called from the test case.
Observed that the sanitizer reported memory leak as clean up is not done
before the process termination in negative/following cases:
**- when we passed '--invalid' as option to redis-server.**
```
-vm:~/mem-leak-issue/redis$ ./src/redis-server --invalid
*** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
Reading the configuration file, at line 2
>>> 'invalid'
Bad directive or wrong number of arguments
=================================================================
==865778==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x7f0985f65867 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x558ec86686ec in ztrymalloc_usable_internal /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:117
#2 0x558ec86686ec in ztrymalloc_usable /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:135
#3 0x558ec86686ec in ztryrealloc_usable_internal /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:276
#4 0x558ec86686ec in zrealloc /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:327
#5 0x558ec865dd7e in sdssplitargs /home/ubuntu/mem-leak-issue/redis/src/sds.c:1172
#6 0x558ec87a1be7 in loadServerConfigFromString /home/ubuntu/mem-leak-issue/redis/src/config.c:472
#7 0x558ec87a13b3 in loadServerConfig /home/ubuntu/mem-leak-issue/redis/src/config.c:718
#8 0x558ec85e6f15 in main /home/ubuntu/mem-leak-issue/redis/src/server.c:7258
#9 0x7f09856e5d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
SUMMARY: AddressSanitizer: 8 byte(s) leaked in 1 allocation(s).
```
**- when we pass '--port' as option and missed to add port number to redis-server.**
```
vm:~/mem-leak-issue/redis$ ./src/redis-server --port
*** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
Reading the configuration file, at line 2
>>> 'port'
wrong number of arguments
=================================================================
==865846==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x7fdcdbb1f867 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x557e8b04f6ec in ztrymalloc_usable_internal /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:117
#2 0x557e8b04f6ec in ztrymalloc_usable /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:135
#3 0x557e8b04f6ec in ztryrealloc_usable_internal /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:276
#4 0x557e8b04f6ec in zrealloc /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:327
#5 0x557e8b044d7e in sdssplitargs /home/ubuntu/mem-leak-issue/redis/src/sds.c:1172
#6 0x557e8b188be7 in loadServerConfigFromString /home/ubuntu/mem-leak-issue/redis/src/config.c:472
#7 0x557e8b1883b3 in loadServerConfig /home/ubuntu/mem-leak-issue/redis/src/config.c:718
#8 0x557e8afcdf15 in main /home/ubuntu/mem-leak-issue/redis/src/server.c:7258
#9 0x7fdcdb29fd8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
Indirect leak of 10 byte(s) in 1 object(s) allocated from:
#0 0x7fdcdbb1fc18 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164
#1 0x557e8b04f9aa in ztryrealloc_usable_internal /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:287
#2 0x557e8b04f9aa in ztryrealloc_usable /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:317
#3 0x557e8b04f9aa in zrealloc_usable /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:342
#4 0x557e8b033f90 in _sdsMakeRoomFor /home/ubuntu/mem-leak-issue/redis/src/sds.c:271
#5 0x557e8b033f90 in sdsMakeRoomFor /home/ubuntu/mem-leak-issue/redis/src/sds.c:295
#6 0x557e8b033f90 in sdscatlen /home/ubuntu/mem-leak-issue/redis/src/sds.c:486
#7 0x557e8b044e1f in sdssplitargs /home/ubuntu/mem-leak-issue/redis/src/sds.c:1165
#8 0x557e8b188be7 in loadServerConfigFromString /home/ubuntu/mem-leak-issue/redis/src/config.c:472
#9 0x557e8b1883b3 in loadServerConfig /home/ubuntu/mem-leak-issue/redis/src/config.c:718
#10 0x557e8afcdf15 in main /home/ubuntu/mem-leak-issue/redis/src/server.c:7258
#11 0x7fdcdb29fd8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
SUMMARY: AddressSanitizer: 18 byte(s) leaked in 2 allocation(s).
```
As part analysis found that the sdsfreesplitres is not called when this condition checks are being hit.
Output after the fix:
```
vm:~/mem-leak-issue/redis$ ./src/redis-server --invalid
*** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
Reading the configuration file, at line 2
>>> 'invalid'
Bad directive or wrong number of arguments
vm:~/mem-leak-issue/redis$
===========================================
vm:~/mem-leak-issue/redis$ ./src/redis-server --jdhg
*** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
Reading the configuration file, at line 2
>>> 'jdhg'
Bad directive or wrong number of arguments
---------------------------------------------------------------------------
vm:~/mem-leak-issue/redis$ ./src/redis-server --port
*** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
Reading the configuration file, at line 2
>>> 'port'
wrong number of arguments
```
Co-authored-by: Oran Agra <oran@redislabs.com>
Adds API
- RedisModule_CommandFilterGetClientId()
Includes addition to commandfilter test module to validate that it works
by performing the same command from 2 different clients
