Add two INFO metrics:
```
total_active_defrag_time:12345
current_active_defrag_time:456
```
`current_active_defrag_time` if greater than 0, means how much time has
passed since active defrag started running. If active defrag stops, this metric is reset to 0.
`total_active_defrag_time` means total time the fragmentation
was over the defrag threshold since the server started.
This is a followup PR for #9031
* Delay to discard cache master when full synchronization
* Don't disconnect with replicas before loading transferred RDB when full sync
Previously, once replica need to start full synchronization with master,
it will discard cached master whatever full synchronization is failed or
not.
Now we discard cached master only when transferring RDB is finished
and start to change data space, this make replica could start partial
resynchronization with another new master if new master is failed
during full synchronization.
When parsing an array type reply, ctx will be lost when recursively parsing its
elements, which will cause a memory leak in automemory mode.
This is a result of the changes in #9202
Add test for callReplyParseCollection fix
When a replica paused, it would not apply any commands event the command comes from master, if we feed the non-applied command to replication stream, the replication offset would be wrong, and data would be lost after failover(since replica's `master_repl_offset` grows but command is not applied).
To fix it, here are the changes:
* Don't update replica's replication offset or propagate commands to sub-replicas when it's paused in `commandProcessed`.
* Show `slave_read_repl_offset` in info reply.
* Add an assert to make sure master client should never be blocked unless pause or module (some modules may use block way to do background (parallel) processing and forward original block module command to the replica, it's not a good way but it can work, so the assert excludes module now, but someday in future all modules should rewrite block command to propagate like what `BLPOP` does).
Until now, giving a negative index seeks from the end of a list and a
positive seeks from the beginning. This change makes it seek from
the nearest end, regardless of the sign of the given index.
quicklistIndex is used by all list commands which operate by index.
LINDEX key 999999 in a list if 1M elements is greately optimized by
this change. Latency is cut by 75%.
LINDEX key -1000000 in a list of 1M elements, likewise.
LRANGE key -1 -1 is affected by this, since LRANGE converts the
indices to positive numbers before seeking.
The tests for corrupt dumps are updated to make sure the corrup
data is seeked in the same direction as before.
1. MIGRATE has a potnetial key arg in argv[3]. It should be reflected in the command table.
2. getKeysUsingCommandTable should never free getKeysResult, it is always freed by the caller)
The reason we never encountered this double-free bug is that almost always getKeysResult
uses the statis buffer and doesn't allocate a new one.
Normally we execute the read event first and then the write event.
When the barrier is set, we will do it reverse.
However, under `kqueue`, if an `fd` has both read and write events,
reading the event using `kevent` will generate two events, which will
result in uncontrolled read and write timing.
This also means that the guarantees of AOF `appendfsync` = `always` are
not met on MacOS without this fix.
The main change to this pr is to cache the events already obtained when reading
them, so that if the same `fd` occurs again, only the mask in the cache is updated,
rather than a new event is generated.
This was exposed by the following test failure on MacOS:
```
*** [err]: AOF fsync always barrier issue in tests/integration/aof.tcl
Expected 544 != 544 (context: type eval line 26 cmd {assert {$size1 != $size2}} proc ::test)
```
This is considered a safer approach as it prevents a race condition that
could lead to chmod executed on a different file.
Not a major risk, but CodeQL alerted this so it makes sense to fix.
* Enhance dict to support arbitrary metadata carried in dictEntry
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
* Rewrite slot-to-keys mapping to linked lists using dict entry metadata
This is a memory enhancement for Redis Cluster.
The radix tree slots_to_keys (which duplicates all key names prefixed with their
slot number) is replaced with a linked list for each slot. The dict entries of
the same cluster slot form a linked list and the pointers are stored as metadata
in each dict entry of the main DB dict.
This commit also moves the slot-to-key API from db.c to cluster.c.
Co-authored-by: Jim Brunner <brunnerj@amazon.com>
We implement incremental data sync in rio.c by call fsync, on slow disk, that may cost a lot of time,
sync_file_range could provide async fsync, so we could serialize key/value and sync file data at the same time.
> one tip for sync_file_range usage: http://lkml.iu.edu/hypermail/linux/kernel/1005.2/01845.html
Additionally, this change avoids a single large write to be used, which can result in a mass of dirty
pages in the kernel (increasing the risk of someone else's write to block).
On HDD, current solution could reduce approximate half of dumping RDB time,
this PR costs 50s for dump 7.7G rdb but unstable branch costs 93s.
On NVME SSD, this PR can't reduce much time, this PR costs 40s, unstable branch costs 48s.
Moreover, I find calling data sync every 4MB is better than 32MB.
This one follow #9313 and goes deeper (validation of config file parsing)
Move the check/update logic to a new updateClientOutputBufferLimit
function. So that it can be used in CONFIG SET and config file parsing.
1. The output of --help:
* On the Usage line, just write [OPTIONS] [COMMAND ARGS...] instead listing
only a few arbitrary options and no command.
* For --cluster, describe that if the command is supplied on the command line,
the key must contain "{tag}". Otherwise, the command will not be sent to the
right cluster node.
* For -r, add a note that if -r is omitted, all commands in a benchmark will
use the same key. Also align the description.
* For -t, describe that -t is ignored if a command is supplied on the command
line.
2. Print a warning if -t is present when a specific command is supplied.
3. Print all warnings and errors to stderr.
4. Remove -e from calls in redis-benchmark test suite.
In multipe threads mode, every thread output throughput info. This
may cause some problems:
- Bug in https://github.com/redis/redis/pull/8615;
- The show throughput is called too frequently;
- showThroughput which updates shared variable lacks synchronization
mechanism.
This commit also reverts changes in #8615 and changes time event
interval to macro.
When `decr_step` is greater than `oldlimit`, the final `bestlimit` may be invalid.
For example, oldlimit = 10, decr_step = 16.
Current bestlimit = 15 and setrlimit() failed. Since bestlimit is less than decr_step , then exit the loop.
The final bestlimit is larger than oldlimit but is invalid.
Note that this only matters if the system fd limit is below 16, so unlikely to have any actual effect.
This aims to solve the issue in CONFIG SET maxmemory can only set maxmemory to up
to 9223372036854775807 (2^63) while the maxmemory should be ULLONG.
Added a memtoull function to convert a string representing an amount of memory
into the number of bytes (similar to memtoll but for ull). Also added ull2string to
convert a ULLong to string (Similar to ll2string).
In old way, we always increase server.dirty in BITSET and BITFIELD SET.
Even the command doesn't really change anything. This commit make
sure BITSET and BITFIELD SET only increase dirty when the value changed.
Because of that, if the value not changed, some others implications:
- Avoid adding useless AOF
- Reduce replication traffic
- Will not trigger keyspace notifications (setbit)
- Will not invalidate WATCH
- Will not sent the invalidation message to the tracking client
We only run OOM related tests on x86_64 and aarch64, as jemalloc on other
platforms (notably s390x) may actually succeed very large allocations. As
a result the test may hang for a very long time at the cleanup phase,
iterating as many as 2^61 hash table slots.
If we want to check `defined(SYNC_FILE_RANGE_WAIT_BEFORE)`, we should include fcntl.h.
otherwise, SYNC_FILE_RANGE_WAIT_BEFORE is not defined, and there is alway not `sync_file_range` system call.
Introduced by #8532
The order of setting things up follows some reasoning: Setup signal
handlers first because a signal could fire at any time. Adjust OOM score
before everything else to assist the OOM killer if memory resources are
low.
The trigger for this is a valgrind test failure which resulted with the
child catching a SIGUSR1 before initializing the handler.
Making sure Redis builds properly on older compiler is important given the wide range of systems it is built for. So far Ubuntu 16.04 has been used for this purpose, but as it's getting phased out we'll move to `oldoldstable` Debian as an "old system" precursor.
Part one of implementing #8702 (taking hashes first before other types)
## Description of the feature
1. Change ziplist encoded hash objects to listpack encoding.
2. Convert existing ziplists on RDB loading time. an O(n) operation.
## Rdb format changes
1. Add RDB_TYPE_HASH_LISTPACK rdb type.
2. Bump RDB_VERSION to 10
## Interface changes
1. New `hash-max-listpack-entries` config is an alias for `hash-max-ziplist-entries` (same with `hash-max-listpack-value`)
2. OBJECT ENCODING will return `listpack` instead of `ziplist`
## Listpack improvements:
1. Support direct insert, replace integer element (rather than convert back and forth from string)
3. Add more listpack capabilities to match the ziplist ones (like `lpFind`, `lpRandomPairs` and such)
4. Optimize element length fetching, avoid multiple calculations
5. Use inline to avoid function call overhead.
## Tests
1. Add a new test to the RDB load time conversion
2. Adding the listpack unit tests. (based on the one in ziplist.c)
3. Add a few "corrupt payload: fuzzer findings" tests, and slightly modify existing ones.
Co-authored-by: Oran Agra <oran@redislabs.com>
This commit mainly fixes empty keys due to RDB loading and restore command,
which was omitted in #9297.
1) When loading quicklsit, if all the ziplists in the quicklist are empty, NULL will be returned.
If only some of the ziplists are empty, then we will skip the empty ziplists silently.
2) When loading hash zipmap, if zipmap is empty, sanitization check will fail.
3) When loading hash ziplist, if ziplist is empty, NULL will be returned.
4) Add RDB loading test with sanitize.
AOF fake client creation (createAOFClient) was doing similar work as createClient,
with some minor differences, most of which unintended, this was dangerous and
meant that many changes to createClient should have always been reflected to aof.c
This cleanup changes createAOFClient to call createClient with NULL, like we
do in module.c and elsewhere.
Replication client no longer checks incoming command length against the client-query-buffer-limit. This makes the master able to replicate commands longer than replica's configured client-query-buffer-limit
The test try to test `insert before 1 element`, but it use quicklist
InsertAfter, a copy-paste typo.
The commit also add an assert to verify results in some tests
to make sure it is as expected.
The execution of the RPOPLPUSH command by the fuzzer created junk keys,
that were later being selected by RANDOMKEY and modified.
This also meant that lists were statistically tested more than other
files.
Fix the fuzzer not to pass junk key names to RPOPLPUSH, and add a check
that detects that new keys are not added by the fuzzer to detect future
similar issues.
Recently we found two issues in the fuzzer tester: #9302#9285
After fixing them, more problems surfaced and this PR (as well as #9297) aims to fix them.
Here's a list of the fixes
- Prevent an overflow when allocating a dict hashtable
- Prevent OOM when attempting to allocate a huge string
- Prevent a few invalid accesses in listpack
- Improve sanitization of listpack first entry
- Validate integrity of stream consumer groups PEL
- Validate integrity of stream listpack entry IDs
- Validate ziplist tail followed by extra data which start with 0xff
Co-authored-by: sundb <sundbcn@gmail.com>
