The following two cases will create an empty destkey HLL:
1. called with no source keys, like `pfmerge destkey`
2. called with non-existing source keys, like `pfmerge destkey non-existing-source-key`
In the first case, in `PFMERGE`, the dest key is actually one of the source keys too.
So `PFMERGE k1 k2` is equivalent to `SUNIONSTORE k1 k1 k2`,
and `PFMERGE k1` is equivalent to `SUNIONSTORE k1 k1`.
So the first case is reasonable, the source key is actually optional.
And the second case, `PFMERGE` on missing keys should succeed and create an empty dest.
This is consistent with `PFCOUNT`, and also with `SUNIONSTORE`, no need to change.
In the module, we will reuse the list iterator entry for RM_ListDelete, but `listTypeDelete` will only update
`quicklistEntry->zi` but not `quicklistEntry->node`, which will result in `quicklistEntry->node` pointing to
a freed memory address if the quicklist node is deleted.
This PR sync `key->u.list.index` and `key->u.list.entry` to list iterator after `RM_ListDelete`.
This PR also optimizes the release code of the original list iterator.
Co-authored-by: Viktor Söderqvist <viktor@zuiderkwast.se>
The use case is a module that wants to implement a blocking command on a key that
necessarily exists and wants to unblock the client in case the key is deleted (much like
what we implemented for XREADGROUP in #10306)
New module API:
* RedisModule_BlockClientOnKeysWithFlags
Flags:
* REDISMODULE_BLOCK_UNBLOCK_NONE
* REDISMODULE_BLOCK_UNBLOCK_DELETED
### Detailed description of code changes
blocked.c:
1. Both module and stream functions are called whether the key exists or not, regardless of
its type. We do that in order to allow modules/stream to unblock the client in case the key
is no longer present or has changed type (the behavior for streams didn't change, just code
that moved into serveClientsBlockedOnStreamKey)
2. Make sure afterCommand is called in serveClientsBlockedOnKeyByModule, in order to propagate
actions from moduleTryServeClientBlockedOnKey.
3. handleClientsBlockedOnKeys: call propagatePendingCommands directly after lookupKeyReadWithFlags
to prevent a possible lazy-expire DEL from being mixed with any command propagated by the
preceding functions.
4. blockForKeys: Caller can specifiy that it wants to be awakened if key is deleted.
Minor optimizations (use dictAddRaw).
5. signalKeyAsReady became signalKeyAsReadyLogic which can take a boolean in case the key is deleted.
It will only signal if there's at least one client that awaits key deletion (to save calls to
handleClientsBlockedOnKeys).
Minor optimizations (use dictAddRaw)
db.c:
1. scanDatabaseForDeletedStreams is now scanDatabaseForDeletedKeys and will signalKeyAsReady
for any key that was removed from the database or changed type. It is the responsibility of the code
in blocked.c to ignore or act on deleted/type-changed keys.
2. Use the new signalDeletedKeyAsReady where needed
blockedonkey.c + tcl:
1. Added test of new capabilities (FSL.BPOPGT now requires the key to exist in order to work)
### Background
The issue is that when saving an RDB with module AUX data, the module AUX metadata
(moduleid, when, ...) is saved to the RDB even though the module did not saved any actual data.
This prevent loading the RDB in the absence of the module (although there is no actual data in
the RDB that requires the module to be loaded).
### Solution
The solution suggested in this PR is that module AUX will be saved on the RDB only if the module
actually saved something during `aux_save` function.
To support backward compatibility, we introduce `aux_save2` callback that acts the same as
`aux_save` with the tiny change of avoid saving the aux field if no data was actually saved by
the module. Modules can use the new API to make sure that if they have no data to save,
then it will be possible to load the created RDB even without the module.
### Concerns
A module may register for the aux load and save hooks just in order to be notified when
saving or loading starts or completed (there are better ways to do that, but it still possible
that someone used it).
However, if a module didn't save a single field in the save callback, it means it's not allowed
to read in the read callback, since it has no way to distinguish between empty and non-empty
payloads. furthermore, it means that if the module did that, it must never change it, since it'll
break compatibility with it's old RDB files, so this is really not a valid use case.
Since some modules (ones who currently save one field indicating an empty payload), need
to know if saving an empty payload is valid, and if Redis is gonna ignore an empty payload
or store it, we opted to add a new API (rather than change behavior of an existing API and
expect modules to check the redis version)
### Technical Details
To avoid saving AUX data on RDB, we change the code to first save the AUX metadata
(moduleid, when, ...) into a temporary buffer. The buffer is then flushed to the rio at the first
time the module makes a write operation inside the `aux_save` function. If the module saves
nothing (and `aux_save2` was used), the entire temporary buffer is simply dropped and no
data about this AUX field is saved to the RDB. This make it possible to load the RDB even in
the absence of the module.
Test was added to verify the fix.
Motivation: for applications that use RM ACL verification functions, they would
want to return errors back to the user, in ways that are consistent with Redis.
While investigating how we should return ACL errors to the user, we realized that
Redis isn't consistent, and currently returns ACL error strings in 3 primary ways.
[For the actual implications of this change, see the "Impact" section at the bottom]
1. how it returns an error when calling a command normally
ACL_DENIED_CMD -> "this user has no permissions to run the '%s' command"
ACL_DENIED_KEY -> "this user has no permissions to access one of the keys used as arguments"
ACL_DENIED_CHANNEL -> "this user has no permissions to access one of the channels used as arguments"
2. how it returns an error when calling via 'acl dryrun' command
ACL_DENIED_CMD -> "This user has no permissions to run the '%s' command"
ACL_DENIED_KEY -> "This user has no permissions to access the '%s' key"
ACL_DENIED_CHANNEL -> "This user has no permissions to access the '%s' channel"
3. how it returns an error via RM_Call (and scripting is similar).
ACL_DENIED_CMD -> "can't run this command or subcommand";
ACL_DENIED_KEY -> "can't access at least one of the keys mentioned in the command arguments";
ACL_DENIED_CHANNEL -> "can't publish to the channel mentioned in the command";
In addition, if one wants to use RM_Call's "dry run" capability instead of the RM ACL
functions directly, one also sees a different problem than it returns ACL errors with a -ERR,
not a -PERM, so it can't be returned directly to the caller.
This PR modifies the code to generate a base message in a common manner with the ability
to set verbose flag for acl dry run errors, and keep it unset for normal/rm_call/script cases
```c
sds getAclErrorMessage(int acl_res, user *user, struct redisCommand *cmd, sds errored_val, int verbose) {
switch (acl_res) {
case ACL_DENIED_CMD:
return sdscatfmt(sdsempty(), "User %S has no permissions to run "
"the '%S' command", user->name, cmd->fullname);
case ACL_DENIED_KEY:
if (verbose) {
return sdscatfmt(sdsempty(), "User %S has no permissions to access "
"the '%S' key", user->name, errored_val);
} else {
return sdsnew("No permissions to access a key");
}
case ACL_DENIED_CHANNEL:
if (verbose) {
return sdscatfmt(sdsempty(), "User %S has no permissions to access "
"the '%S' channel", user->name, errored_val);
} else {
return sdsnew("No permissions to access a channel");
}
}
```
The caller can append/prepend the message (adding NOPERM for normal/RM_Call or indicating it's within a script).
Impact:
- Plain commands, as well as scripts and RM_Call now include the user name.
- ACL DRYRUN remains the only one that's verbose (mentions the offending channel or key name)
- Changes RM_Call ACL errors from being a `-ERR` to being `-NOPERM` (besides for textual changes)
**This somewhat a breaking change, but it only affects the RM_Call with both `C` and `E`, or `D`**
- Changes ACL errors in scripts textually from being
`The user executing the script <old non unified text>`
to
`ACL failure in script: <new unified text>`
As discussed on #11084, `propagatePendingCommands` should happened after the del
notification is fired so that the notification effect and the `del` will be replicated inside MULTI EXEC.
Test was added to verify the fix.
All commands / use cases that heavily rely on double to a string representation conversion,
(e.g. meaning take a double-precision floating-point number like 1.5 and return a string like "1.5" ),
could benefit from a performance boost by swapping snprintf(buf,len,"%.17g",value) by the
equivalent [fpconv_dtoa](https://github.com/night-shift/fpconv) or any other algorithm that ensures
100% coverage of conversion.
This is a well-studied topic and Projects like MongoDB. RedPanda, PyTorch leverage libraries
( fmtlib ) that use the optimized double to string conversion underneath.
The positive impact can be substantial. This PR uses the grisu2 approach ( grisu explained on
https://www.cs.tufts.edu/~nr/cs257/archive/florian-loitsch/printf.pdf section 5 ).
test suite changes:
Despite being compatible, in some cases it produces a different result from printf, and some tests
had to be adjusted.
one case is that `%.17g` (which means %e or %f which ever is shorter), chose to use `5000000000`
instead of 5e+9, which sounds like a bug?
In other cases, we changed TCL to compare numbers instead of strings to ignore minor rounding
issues (`expr 0.8 == 0.79999999999999999`)
When using the MIGRATE, with a destination Redis that has the user name or password set to the string "keys",
Redis would have determine the wrong set of key names the command is gonna access.
This lead to ACL returning wrong authentication result.
Destination instance:
```
127.0.0.1:6380> acl setuser default >keys
OK
127.0.0.1:6380> acl setuser keys on nopass ~* &* +@all
OK
```
Source instance:
```
127.0.0.1:6379> set a 123
OK
127.0.0.1:6379> acl setuser cc on nopass ~a* +@all
OK
127.0.0.1:6379> auth cc 1
OK
127.0.0.1:6379> migrate 127.0.0.1 6380 "" 0 1000 auth keys keys a
(error) NOPERM this user has no permissions to access one of the keys used as arguments
127.0.0.1:6379> migrate 127.0.0.1 6380 "" 0 1000 auth2 keys pswd keys a
(error) NOPERM this user has no permissions to access one of the keys used as arguments
```
Using `acl dryrun` we know that the parameters of `auth` and `auth2` are mistaken for the `keys` option.
```
127.0.0.1:6379> acl dryrun cc migrate whatever whatever "" 0 1000 auth keys keys a
"This user has no permissions to access the 'keys' key"
127.0.0.1:6379> acl dryrun cc migrate whatever whatever "" 0 1000 auth2 keys pswd keys a
"This user has no permissions to access the 'pswd' key"
```
Fix the bug by editing db.c/migrateGetKeys function, which finds the `keys` option and all the keys following.
PR #9320 introduces initialization order changes. Now cluster is initialized after modules.
This changes causes a crash if the module uses RM_Call inside the load function
on cluster mode (the code will try to access `server.cluster` which at this point is NULL).
To solve it, separate cluster initialization into 2 phases:
1. Structure initialization that happened before the modules initialization
2. Listener initialization that happened after.
Test was added to verify the fix.
Freeze time during execution of scripts and all other commands.
This means that a key is either expired or not, and doesn't change
state during a script execution. resolves#10182
This PR try to add a new `commandTimeSnapshot` function.
The function logic is extracted from `keyIsExpired`, but the related
calls to `fixed_time_expire` and `mstime()` are removed, see below.
In commands, we will avoid calling `mstime()` multiple times
and just use the one that sampled in call. The background is,
e.g. using `PEXPIRE 1` with valgrind sometimes result in the key
being deleted rather than expired. The reason is that both `PEXPIRE`
command and `checkAlreadyExpired` call `mstime()` separately.
There are other more important changes in this PR:
1. Eliminate `fixed_time_expire`, it is no longer needed.
When we want to sample time we should always use a time snapshot.
We will use `in_nested_call` instead to update the cached time in `call`.
2. Move the call for `updateCachedTime` from `serverCron` to `afterSleep`.
Now `commandTimeSnapshot` will always return the sample time, the
`lookupKeyReadWithFlags` call in `getNodeByQuery` will get a outdated
cached time (because `processCommand` is out of the `call` context).
We put the call to `updateCachedTime` in `aftersleep`.
3. Cache the time each time the module lock Redis.
Call `updateCachedTime` in `moduleGILAfterLock`, affecting `RM_ThreadSafeContextLock`
and `RM_ThreadSafeContextTryLock`
Currently the commandTimeSnapshot change affects the following TTL commands:
- SET EX / SET PX
- EXPIRE / PEXPIRE
- SETEX / PSETEX
- GETEX EX / GETEX PX
- TTL / PTTL
- EXPIRETIME / PEXPIRETIME
- RESTORE key TTL
And other commands just use the cached mstime (including TIME).
This is considered to be a breaking change since it can break a script
that uses a loop to wait for a key to expire.
As mentioned on docs, `RM_ResetDataset` Performs similar operation to FLUSHALL.
As FLUSHALL do not clean the function, `RM_ResetDataset` should not clean the functions
as well.
Refine getTimeoutFromObjectOrReply() out-of-range check.
Timeout is parsed (and verifies out of range) as double and
multiplied by 1000, added mstime() and stored in long-long
which might lead to out-of-range value of long-long.
Co-authored-by: moticless <moticless@github.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
This PR introduces a couple of changes to improve cluster test stability:
1. Increase the cluster node timeout to 3 seconds, which is similar to the
normal cluster tests, but introduce a new mechanism to increase the ping
period so that the tests are still fast. This new config is a debug config.
2. Set `cluster-replica-no-failover yes` on a wider array of tests which are
sensitive to failovers. This was occurring on the ARM CI.
There is a race condition in the test:
```
*** [err]: redis-cli --cluster add-node with cluster-port in tests/unit/cluster/cli.tcl
Expected '5' to be equal to '4' {assert_equal 5 [CI 0 cluster_known_nodes]} proc ::test)
```
When using cli to add node, there can potentially be a race condition
in which all nodes presenting cluster state o.k even though the added
node did not yet meet all cluster nodes.
This comment and the fix were taken from #11221. Also apply it in several
other similar places.
Mainly fix two minor bug
1. When handle BL*POP/BLMOVE commands with blocked clients, we should increment server.dirty.
2. `listPopRangeAndReplyWithKey()` in `serveClientBlockedOnList()` should not repeat calling
`signalModifiedKey()` which has been called when an element was pushed on the list.
(was skipped in all bpop commands, other than blmpop)
Other optimization
add `signal` param for `listElementsRemoved` to skip `signalModifiedKey()` to unify all pop operation.
Unifying all pop operations also prepares us for #11303, so that we can avoid having to deal with the
conversion from quicklist to listpack() in various places when the list shrinks.
The original idea behind auto-setting the default (first,last,step) spec was to use
the most "open" flags when the user didn't provide any key-spec flags information.
While the above idea is a good approach, it really makes no sense to set
CMD_KEY_VARIABLE_FLAGS if the user didn't provide the getkeys-api flag:
in this case there's not way to retrieve these variable flags, so what's the point?
Internally in redis there was code to ignore this already, so this fix doesn't change
redis's behavior, it only affects the output of COMMAND command.
If a command gets an OOM response and then if we set maxmemory to zero
to disable the limit, server.pre_command_oom_state never gets updated
and it stays true. As RM_Call() calls with "respect deny-oom" flag checks
server.pre_command_oom_state, all calls will fail with OOM.
Added server.maxmemory check in RM_Call() to process deny-oom flag
only if maxmemory is configured.
Adds a number of user management/ACL validaiton/command execution functions to improve a
Redis module's ability to enforce ACLs correctly and easily.
* RM_SetContextUser - sets a RedisModuleUser on the context, which RM_Call will use to both
validate ACLs (if requested and set) as well as assign to the client so that scripts executed via
RM_Call will have proper ACL validation.
* RM_SetModuleUserACLString - Enables one to pass an entire ACL string, not just a single OP
and have it applied to the user
* RM_GetModuleUserACLString - returns a stringified version of the user's ACL (same format as dump
and list). Contains an optimization to cache the stringified version until the underlying ACL is modified.
* Slightly re-purpose the "C" flag to RM_Call from just being about ACL check before calling the
command, to actually running the command with the right user, so that it also affects commands
inside EVAL scripts. see #11231
Executing an XAUTOCLAIM command on a stream key in a specific state, with a
specially crafted COUNT argument may cause an integer overflow, a subsequent
heap overflow, and potentially lead to remote code execution.
The problem affects Redis versions 7.0.0 or newer.
Starting from 6.2, after ACL SETUSER user reset, the user
will carry the sanitize-payload flag. It was added in #7807,
and then ACL SETUSER reset is inconsistent with default
newly created user which missing sanitize-payload flag.
Same as `off` and `on` these two bits are mutually exclusive,
the default created user needs to have sanitize-payload flag.
Adds USER_FLAG_SANITIZE_PAYLOAD flag to ACLCreateUser.
Note that the bug don't have any real implications,
since the code in rdb.c (rdbLoadObject) checks for
`USER_FLAG_SANITIZE_PAYLOAD_SKIP`, so the fact that
`USER_FLAG_SANITIZE_PAYLOAD` is missing doesn't really matters.
Added tests to make sure it won't be broken in the future,
and updated the comment in ACLSetUser and redis.conf
When using `INFO ALL <section>`, when `section` is a specific module section.
Redis will not print the additional section(s).
The fix in this case, will search the modules info sections if the user provided additional sections to `ALL`.
Co-authored-by: Oran Agra <oran@redislabs.com>
This PR mainly deals with 2 crashes introduced in #9357,
and fix the QUICKLIST-PACKED-THRESHOLD mess in external test mode.
1. Fix crash due to deleting an entry from a compress quicklistNode
When inserting a large element, we need to create a new quicklistNode first,
and then delete its previous element, if the node where the deleted element is
located is compressed, it will cause a crash.
Now add `dont_compress` to quicklistNode, if we want to use a quicklistNode
after some operation, we can use this flag like following:
```c
node->dont_compress = 1; /* Prevent to be compressed */
some_operation(node); /* This operation might try to compress this node */
some_other_operation(node); /* We can use this node without decompress it */
node->dont_compress = 0; /* Re-able compression */
quicklistCompressNode(node);
```
Perhaps in the future, we could just disable the current entry from being
compressed during the iterator loop, but that would require more work.
2. Fix crash due to wrongly split quicklist
before #9357, the offset param of _quicklistSplitNode() will not negative.
For now, when offset is negative, the split extent will be wrong.
following example:
```c
int orig_start = after ? offset + 1 : 0;
int orig_extent = after ? -1 : offset;
int new_start = after ? 0 : offset;
int new_extent = after ? offset + 1 : -1;
# offset: -2, after: 1, node->count: 2
# current wrong range: [-1,-1] [0,-1]
# correct range: [1,-1] [0, 1]
```
Because only `_quicklistInsert()` splits the quicklistNode and only
`quicklistInsertAfter()`, `quicklistInsertBefore()` call _quicklistInsert(),
so `quicklistReplaceEntry()` and `listTypeInsert()` might occur this crash.
But the iterator of `listTypeInsert()` is alway from head to tail(iter->offset is
always positive), so it is not affected.
The final conclusion is this crash only occur when we insert a large element
with negative index into a list, that affects `LSET` command and `RM_ListSet`
module api.
3. In external test mode, we need to restore quicklist packed threshold after
when the end of test.
4. Show `node->count` in quicklistRepr().
5. Add new tcl proc `config_get_set` to support restoring config in tests.
When using cli to add node, there can potentially be a race condition in
which all nodes presenting cluster state o.k even though the added node
did not yet meet all cluster nodes.
this adds another utility function to wait until all cluster nodes see the same cluster size
Add a new "D" flag to RM_Call which runs whatever verification the user requests,
but returns before the actual execution of the command.
It automatically enables returning error messages as CallReply objects to distinguish
success (NULL) from failure (CallReply returned).
When RM_Call was used with `M` (reject OOM), `W` (reject writes),
as well as `S` (rejecting stale or write commands in "Script mode"),
it would have only checked the command flags, but not the declared
script flag in case it's a command that runs a script.
Refactoring: extracts out similar code in server.c's processCommand
to be usable in RM_Call as well.
Bugfix:
with the scenario if we force assigned a slot to other master,
old master will lose the slot ownership, then old master will
call the function delKeysInSlot() to delete all keys which in
the slot. These delete operations should replicate to replicas,
avoid the data divergence issue in master and replicas.
Additionally, in this case, we now call:
* signalModifiedKey (to invalidate WATCH)
* moduleNotifyKeyspaceEvent (key space notification for modules)
* dirty++ (to signal that the persistence file may be outdated)
Co-authored-by: weimeng <weimeng@didiglobal.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Check the validity of the value before performing the create operation,
prevents new data from being generated even if the request fails to execute.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: chendianqiang <chendianqiang@meituan.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
Redis 7.0 has #9890 which added an assertion when the propagation queue
was not flushed and we got to beforeSleep.
But it turns out that when processCommands calls getNodeByQuery and
decides to reject the command, it can lead to a key that was lazy
expired and is deleted without later flushing the propagation queue.
This change prevents lazy expiry from deleting the key at this stage
(not as part of a command being processed in `call`)
The PR reverts the changes made on #10969.
The reason for revert was trigger because of occasional test failure
that started after the PR was merged.
The issue is that if there is a lazy expire during the command invocation,
the `del` command is added to the replication stream after the command
placeholder. So the logical order on the primary is:
* Delete the key (lazy expiration)
* Command invocation
But the replication stream gets it the other way around:
* Command invocation (because the command is written into the placeholder)
* Delete the key (lazy expiration)
So if the command write to the key that was just lazy expired we will get
inconsistency between primary and replica.
One solution we considered is to add another lazy expire replication stream
and write all the lazy expire there. Then when replicating, we will replicate the
lazy expire replication stream first. This will solve this specific test failure but
we realize that the issues does not ends here and the more we dig the more
problems we find.One of the example we thought about (that can actually
crashes Redis) is as follow:
* User perform SINTERSTORE
* When Redis tries to fetch the second input key it triggers lazy expire
* The lazy expire trigger a module logic that deletes the first input key
* Now Redis hold the robj of the first input key that was actually freed
We believe we took the wrong approach and we will come up with another
PR that solve the problem differently, for now we revert the changes so we
will not have the tests failure.
Notice that not the entire code was revert, some parts of the PR are changes
that we would like to keep. The changes that **was** reverted are:
* Saving a placeholder for replication at the beginning of the command (`call` function)
* Order of the replication stream on active expire and eviction (we will decide how
to handle it correctly on follow up PR)
* `Spop` changes are no longer needed (because we reverted the placeholder code)
Changes that **was not** reverted:
* On expire/eviction, wrap the `del` and the notification effect in a multi exec.
* `PropagateNow` function can still accept a special dbid, -1, indicating not to replicate select.
* Keep optimisation for reusing the `alsoPropagate` array instead of allocating it each time.
Tests:
* All tests was kept and only few tests was modify to work correctly with the changes
* Test was added to verify that the revert fixes the issues.
* Support BUILD_TLS=module to be loaded as a module via config file or
command line. e.g. redis-server --loadmodule redis-tls.so
* Updates to redismodule.h to allow it to be used side by side with
server.h by defining REDISMODULE_CORE_MODULE
* Changes to server.h, redismodule.h and module.c to avoid repeated
type declarations (gcc 4.8 doesn't like these)
* Add a mechanism for non-ABI neutral modules (ones who include
server.h) to refuse loading if they detect not being built together with
redis (release.c)
* Fix wrong signature of RedisModuleDefragFunc, this could break
compilation of a module, but not the ABI
* Move initialization of listeners in server.c to be after loading
the modules
* Config TLS after initialization of listeners
* Init cluster after initialization of listeners
* Add TLS module to CI
* Fix a test suite race conditions:
Now that the listeners are initialized later, it's not sufficient to
wait for the PID message in the log, we need to wait for the "Server
Initialized" message.
* Fix issues with moduleconfigs test as a result from start_server
waiting for "Server Initialized"
* Fix issues with modules/infra test as a result of an additional module
present
Notes about Sentinel:
Sentinel can't really rely on the tls module, since it uses hiredis to
initiate connections and depends on OpenSSL (won't be able to use any
other connection modules for that), so it was decided that when TLS is
built as a module, sentinel does not support TLS at all.
This means that it keeps using redis_tls_ctx and redis_tls_client_ctx directly.
Example code of config in redis-tls.so(may be use in the future):
RedisModuleString *tls_cfg = NULL;
void tlsInfo(RedisModuleInfoCtx *ctx, int for_crash_report) {
UNUSED(for_crash_report);
RedisModule_InfoAddSection(ctx, "");
RedisModule_InfoAddFieldLongLong(ctx, "var", 42);
}
int tlsCommand(RedisModuleCtx *ctx, RedisModuleString **argv, int argc)
{
if (argc != 2) return RedisModule_WrongArity(ctx);
return RedisModule_ReplyWithString(ctx, argv[1]);
}
RedisModuleString *getStringConfigCommand(const char *name, void *privdata) {
REDISMODULE_NOT_USED(name);
REDISMODULE_NOT_USED(privdata);
return tls_cfg;
}
int setStringConfigCommand(const char *name, RedisModuleString *new, void *privdata, RedisModuleString **err) {
REDISMODULE_NOT_USED(name);
REDISMODULE_NOT_USED(err);
REDISMODULE_NOT_USED(privdata);
if (tls_cfg) RedisModule_FreeString(NULL, tls_cfg);
RedisModule_RetainString(NULL, new);
tls_cfg = new;
return REDISMODULE_OK;
}
int RedisModule_OnLoad(void *ctx, RedisModuleString **argv, int argc)
{
....
if (RedisModule_CreateCommand(ctx,"tls",tlsCommand,"",0,0,0) == REDISMODULE_ERR)
return REDISMODULE_ERR;
if (RedisModule_RegisterStringConfig(ctx, "cfg", "", REDISMODULE_CONFIG_DEFAULT, getStringConfigCommand, setStringConfigCommand, NULL, NULL) == REDISMODULE_ERR)
return REDISMODULE_ERR;
if (RedisModule_LoadConfigs(ctx) == REDISMODULE_ERR) {
if (tls_cfg) {
RedisModule_FreeString(ctx, tls_cfg);
tls_cfg = NULL;
}
return REDISMODULE_ERR;
}
...
}
Co-authored-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
This PR includes 2 missed test cases of XDEL and XGROUP CREATE command
1. one test case: XDEL delete multiply id once
2. 3 test cases: XGROUP CREATE has ENTRIESREAD parameter,
which equal 0 (special positive number), 3 and negative value.
Co-authored-by: Ubuntu <lucas.guang.yang1@huawei.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
Currently, we call zfree(cmd->args), but the argument array
needs to be freed recursively (there might be sub-args).
Also fixed memory leaks on cmd->tips and cmd->history.
Fixes#11145
Fix replication inconsistency on modules that uses key space notifications.
### The Problem
In general, key space notifications are invoked after the command logic was
executed (this is not always the case, we will discuss later about specific
command that do not follow this rules). For example, the `set x 1` will trigger
a `set` notification that will be invoked after the `set` logic was performed, so
if the notification logic will try to fetch `x`, it will see the new data that was written.
Consider the scenario on which the notification logic performs some write
commands. for example, the notification logic increase some counter,
`incr x{counter}`, indicating how many times `x` was changed.
The logical order by which the logic was executed is has follow:
```
set x 1
incr x{counter}
```
The issue is that the `set x 1` command is added to the replication buffer
at the end of the command invocation (specifically after the key space
notification logic was invoked and performed the `incr` command).
The replication/aof sees the commands in the wrong order:
```
incr x{counter}
set x 1
```
In this specific example the order is less important.
But if, for example, the notification would have deleted `x` then we would
end up with primary-replica inconsistency.
### The Solution
Put the command that cause the notification in its rightful place. In the
above example, the `set x 1` command logic was executed before the
notification logic, so it should be added to the replication buffer before
the commands that is invoked by the notification logic. To achieve this,
without a major code refactoring, we save a placeholder in the replication
buffer, when finishing invoking the command logic we check if the command
need to be replicated, and if it does, we use the placeholder to add it to the
replication buffer instead of appending it to the end.
To be efficient and not allocating memory on each command to save the
placeholder, the replication buffer array was modified to reuse memory
(instead of allocating it each time we want to replicate commands).
Also, to avoid saving a placeholder when not needed, we do it only for
WRITE or MAY_REPLICATE commands.
#### Additional Fixes
* Expire and Eviction notifications:
* Expire/Eviction logical order was to first perform the Expire/Eviction
and then the notification logic. The replication buffer got this in the
other way around (first notification effect and then the `del` command).
The PR fixes this issue.
* The notification effect and the `del` command was not wrap with
`multi-exec` (if needed). The PR also fix this issue.
* SPOP command:
* On spop, the `spop` notification was fired before the command logic
was executed. The change in this PR would have cause the replication
order to be change (first `spop` command and then notification `logic`)
although the logical order is first the notification logic and then the
`spop` logic. The right fix would have been to move the notification to
be fired after the command was executed (like all the other commands),
but this can be considered a breaking change. To overcome this, the PR
keeps the current behavior and changes the `spop` code to keep the right
logical order when pushing commands to the replication buffer. Another PR
will follow to fix the SPOP properly and match it to the other command (we
split it to 2 separate PR's so it will be easy to cherry-pick this PR to 7.0 if
we chose to).
#### Unhanded Known Limitations
* key miss event:
* On key miss event, if a module performed some write command on the
event (using `RM_Call`), the `dirty` counter would increase and the read
command that cause the key miss event would be replicated to the replication
and aof. This problem can also happened on a write command that open
some keys but eventually decides not to perform any action. We decided
not to handle this problem on this PR because the solution is complex
and will cause additional risks in case we will want to cherry-pick this PR.
We should decide if we want to handle it in future PR's. For now, modules
writers is advice not to perform any write commands on key miss event.
#### Testing
* We already have tests to cover cases where a notification is invoking write
commands that are also added to the replication buffer, the tests was modified
to verify that the replica gets the command in the correct logical order.
* Test was added to verify that `spop` behavior was kept unchanged.
* Test was added to verify key miss event behave as expected.
* Test was added to verify the changes do not break lazy expiration.
#### Additional Changes
* `propagateNow` function can accept a special dbid, -1, indicating not
to replicate `select`. We use this to replicate `multi/exec` on `propagatePendingCommands`
function. The side effect of this change is that now the `select` command
will appear inside the `multi/exec` block on the replication stream (instead of
outside of the `multi/exec` block). Tests was modified to match this new behavior.
Make sure the script calls in the tests declare the keys they intend to use.
Do that with minimal changes to existing lines (so many scripts still have a hard coded key names)
Co-authored-by: Valentino Geron <valentino@redis.com>
This pr mainly has the following four changes:
1. Add missing lua_pop in `luaGetFromRegistry`.
This bug affects `redis.register_function`, where `luaGetFromRegistry` in
`luaRegisterFunction` will return null when we call `redis.register_function` nested.
.e.g
```
FUNCTION LOAD "#!lua name=mylib \n local lib=redis \n lib.register_function('f2', function(keys, args) lib.register_function('f1', function () end) end)"
fcall f2 0
````
But since we exit when luaGetFromRegistry returns null, it does not cause the stack to grow indefinitely.
3. When getting `REGISTRY_RUN_CTX_NAME` from the registry, use `serverAssert`
instead of error return. Since none of these lua functions are registered at the time
of function load, scriptRunCtx will never be NULL.
4. Add `serverAssert` for `luaLdbLineHook`, `luaEngineLoadHook`.
5. Remove `luaGetFromRegistry` from `redis_math_random` and
`redis_math_randomseed`, it looks like they are redundant.
some skip tags were missing on some tests
avoid using HELLO if denytags has resp3 (target server may not support it)
Co-authored-by: Valentino Geron <valentino@redis.com>
`bitfield` with `get` may not be readonly.
```
127.0.0.1:6384> acl setuser hello on nopass %R~* +@all
OK
127.0.0.1:6384> auth hello 1
OK
127.0.0.1:6384> bitfield hello set i8 0 1
(error) NOPERM this user has no permissions to access one of the keys used as arguments
127.0.0.1:6384> bitfield hello set i8 0 1 get i8 0
1) (integer) 0
2) (integer) 1
```
Co-authored-by: Oran Agra <oran@redislabs.com>
* some of the tests don't clean the key the use
* marked tests with `{singledb:skip}` if they use SELECT
Co-authored-by: Valentino Geron <valentino@redis.com>
Fix#11030, use lua_rawget to avoid triggering metatables.
#11030 shows how return `_G` from the Lua script (either function or eval), cause the
Lua interpreter to Panic and the Redis processes to exit with error code 1.
Though return `_G` only panic on Redis 7 and 6.2.7, the underline issue exists on older
versions as well (6.0 and 6.2). The underline issue is returning a table with a metatable
such that the metatable raises an error.
The following example demonstrate the issue:
```
127.0.0.1:6379> eval "local a = {}; setmetatable(a,{__index=function() foo() end}) return a" 0
Error: Server closed the connection
```
```
PANIC: unprotected error in call to Lua API (user_script:1: Script attempted to access nonexistent global variable 'foo')
```
The Lua panic happened because when returning the result to the client, Redis needs to
introspect the returning table and transform the table into a resp. In order to scan the table,
Redis uses `lua_gettable` api which might trigger the metatable (if exists) and might raise an error.
This code is not running inside `pcall` (Lua protected call), so raising an error causes the
Lua to panic and exit. Notice that this is not a crash, its a Lua panic that exit with error code 1.
Returning `_G` panics on Redis 7 and 6.2.7 because on those versions `_G` has a metatable
that raises error when trying to fetch a none existing key.
### Solution
Instead of using `lua_gettable` that might raise error and cause the issue, use `lua_rawget`
that simply return the value from the table without triggering any metatable logic.
This is promised not to raise and error.
The downside of this solution is that it might be considered as breaking change, if someone
rely on metatable in the returned value. An alternative solution is to wrap this entire logic
with `pcall` (Lua protected call), this alternative require a much bigger refactoring.
### Back Porting
The same fix will work on older versions as well (6.2, 6.0). Notice that on those version,
the issue can cause Redis to crash if inside the metatable logic there is an attempt to accesses
Redis (`redis.call`). On 7.0, there is not crash and the `redis.call` is executed as if it was done
from inside the script itself.
### Tests
Tests was added the verify the fix
Gossip the cluster node blacklist in ping and pong messages.
This means that CLUSTER FORGET doesn't need to be sent to all nodes in a cluster.
It can be sent to one or more nodes and then be propagated to the rest of them.
For each blacklisted node, its node id and its remaining blacklist TTL is gossiped in a
cluster bus ping extension (introduced in #9530).
