these tests create several edge cases that are otherwise uncovered (at
least not consistently) by the test suite, so although they're no longer
testing what they were meant to test, it's still a good idea to keep
them in hope that they'll expose some issue in the future.
with the original version of 6.0.0, this test detects an excessive full
sync.
with the fix in 1a7cd2c0e, this test detects memory corruption,
especially when using libc allocator with or without valgrind.
this test which has coverage for varoius flows of diskless master was
failing randomly from time to time.
the failure was:
[err]: diskless all replicas drop during rdb pipe in tests/integration/replication.tcl
log message of '*Diskless rdb transfer, last replica dropped, killing fork child*' not found
what seemed to have happened is that the master didn't detect that all
replicas dropped by the time the replication ended, it thought that one
replica is still connected.
now the test takes a few seconds longer but it seems stable.
This bug was introduced by a recent change in which readQueryFromClient
is using freeClientAsync, and despite the fact that now
freeClientsInAsyncFreeQueue is in beforeSleep, that's not enough since
it's not called during loading in processEventsWhileBlocked.
furthermore, afterSleep was called in that case but beforeSleep wasn't.
This bug also caused slowness sine the level-triggered mode of epoll
kept signaling these connections as readable causing us to keep doing
connRead again and again for ll of these, which keep accumulating.
now both before and after sleep are called, but not all of their actions
are performed during loading, some are only reserved for the main loop.
fixes issue #7215
* fix memlry leaks with diskless replica short read.
* fix a few timing issues with valgrind runs
* fix issue with valgrind and watchdog schedule signal
about the valgrind WD issue:
the stack trace test in logging.tcl, has issues with valgrind:
==28808== Can't extend stack to 0x1ffeffdb38 during signal delivery for thread 1:
==28808== too small or bad protection modes
it seems to be some valgrind bug with SA_ONSTACK.
SA_ONSTACK seems unneeded since WD is not recursive (SA_NODEFER was removed),
also, not sure if it's even valid without a call to sigaltstack()
Now both master and replicas keep track of the last replication offset
that contains meaningful data (ignoring the tailing pings), and both
trim that tail from the replication backlog, and the offset with which
they try to use for psync.
the implication is that if someone missed some pings, or even have
excessive pings that the promoted replica has, it'll still be able to
psync (avoid full sync).
the downside (which was already committed) is that replicas running old
code may fail to psync, since the promoted replica trims pings form it's
backlog.
This commit adds a test that reproduces several cases of promotions and
demotions with stale and non-stale pings
Background:
The mearningful offset on the master was added recently to solve a problem were
the master is left all alone, injecting PINGs into it's backlog when no one is
listening and then gets demoted and tries to replicate from a replica that didn't
have any of the PINGs (or at least not the last ones).
however, consider this case:
master A has two replicas (B and C) replicating directly from it.
there's no traffic at all, and also no network issues, just many pings in the
tail of the backlog. now B gets promoted, A becomes a replica of B, and C
remains a replica of A. when A gets demoted, it trims the pings from its
backlog, and successfully replicate from B. however, C is still aware of
these PINGs, when it'll disconnect and re-connect to A, it'll ask for something
that's not in the backlog anymore (since A trimmed the tail of it's backlog),
and be forced to do a full sync (something it didn't have to do before the
meaningful offset fix).
Besides that, the psync2 test was always failing randomly here and there, it
turns out the reason were PINGs. Investigating it shows the following scenario:
cycle 1: redis #1 is master, and all the rest are direct replicas of #1
cycle 2: redis #2 is promoted to master, #1 is a replica of #2 and #3 is replica of #1
now we see that when #1 is demoted it prints:
17339:S 21 Apr 2020 11:16:38.523 * Using the meaningful offset 3929963 instead of 3929977 to exclude the final PINGs (14 bytes difference)
17339:S 21 Apr 2020 11:16:39.391 * Trying a partial resynchronization (request e2b3f8817735fdfe5fa4626766daa938b61419e5:3929964).
17339:S 21 Apr 2020 11:16:39.392 * Successful partial resynchronization with master.
and when #3 connects to the demoted #2, #2 says:
17339:S 21 Apr 2020 11:16:40.084 * Partial resynchronization not accepted: Requested offset for secondary ID was 3929978, but I can reply up to 3929964
so the issue here is that the meaningful offset feature saved the day for the
demoted master (since it needs to sync from a replica that didn't get the last
ping), but it didn't help one of the other replicas which did get the last ping.
*** [err]: PSYNC2: total sum of full synchronizations is exactly 4 in tests/integration/psync2.tcl
Expected 5 == 4 (context: type eval line 6 cmd {assert {$sum == 4}} proc ::test)
issue was that sometime the test got an unexpected full sync since it
tried to switch to the replica before it was in sync with it's master.
misc:
- handle SSL_has_pending by iterating though these in beforeSleep, and setting timeout of 0 to aeProcessEvents
- fix issue with epoll signaling EPOLLHUP and EPOLLERR only to the write handlers. (needed to detect the rdb pipe was closed)
- add key-load-delay config for testing
- trim connShutdown which is no longer needed
- rioFdsetWrite -> rioFdWrite - simplified since there's no longer need to write to multiple FDs
- don't detect rdb child exited (don't call wait3) until we detect the pipe is closed
- Cleanup bad optimization from rio.c, add another one
* Introduce a connection abstraction layer for all socket operations and
integrate it across the code base.
* Provide an optional TLS connections implementation based on OpenSSL.
* Pull a newer version of hiredis with TLS support.
* Tests, redis-cli updates for TLS support.
now that replica can read rdb directly from the socket, it should avoid exiting
on short read and instead try to re-sync.
this commit tries to have minimal effects on non-diskless rdb reading.
and includes a test that tries to trigger this scenario on various read cases.
The implementation of the diskless replication was currently diskless only on the master side.
The slave side was still storing the received rdb file to the disk before loading it back in and parsing it.
This commit adds two modes to load rdb directly from socket:
1) when-empty
2) using "swapdb"
the third mode of using diskless slave by flushdb is risky and currently not included.
other changes:
--------------
distinguish between aof configuration and state so that we can re-enable aof only when sync eventually
succeeds (and not when exiting from readSyncBulkPayload after a failed attempt)
also a CONFIG GET and INFO during rdb loading would have lied
When loading rdb from the network, don't kill the server on short read (that can be a network error)
Fix rdb check when performed on preamble AOF
tests:
run replication tests for diskless slave too
make replication test a bit more aggressive
Add test for diskless load swapdb
solving few replication related tests race conditions which fail on slow machines
bugfix in slave buffers test: since the test is executed twice, each time with
a different commands count, the threshold for the delta can't be a constant.
Experimentally verified that it can trigger the issue reverting the fix.
At least on my system... Being the bug time/backlog dependant, it is
very hard to tell if this test will be able to trigger the problem
consistently, however even if it triggers the problem once in a while,
we'll see it in the CI environment at http://ci.redis.io.
And many other related Github issues... all reporting the same problem.
There was probably just not enough backlog in certain unlucky runs.
I'll ask people that can reporduce if they see now this as fixed as
well.
Testing with Solaris C compiler (SunOS 5.11 11.2 sun4v sparc sun4v)
there were issues compiling due to atomicvar.h and running the
tests also failed because of "tail" usage not conform with Solaris
tail implementation. This commit fixes both the issues.
