On some platforms strtold("+inf") with valgrind returns a non-inf result
[err]: INCRBYFLOAT does not allow NaN or Infinity in tests/unit/type/incr.tcl
Expected 'ERR*would produce*' to equal or match '1189731495357231765085759.....'
tests were sensitive to additional log lines appearing in the log
causing the search to come empty handed.
instead of just looking for the n last log lines, capture the log lines
before performing the action, and then search from that offset.
In order to support the use of multi-exec in pipeline, it is important that
MULTI and EXEC are never rejected and it is easy for the client to know if the
connection is still in multi state.
It was easy to make sure MULTI and DISCARD never fail (done by previous
commits) since these only change the client state and don't do any actual
change in the server, but EXEC is a different story.
Since in the past, it was possible for clients to handle some EXEC errors and
retry the EXEC, we now can't affort to return any error on EXEC other than
EXECABORT, which now carries with it the real reason for the abort too.
Other fixes in this commit:
- Some checks that where performed at the time of queuing need to be re-
validated when EXEC runs, for instance if the transaction contains writes
commands, it needs to be aborted. there was one check that was already done
in execCommand (-READONLY), but other checks where missing: -OOM, -MISCONF,
-NOREPLICAS, -MASTERDOWN
- When a command is rejected by processCommand it was rejected with addReply,
which was not recognized as an error in case the bad command came from the
master. this will enable to count or MONITOR these errors in the future.
- make it easier for tests to create additional (non deferred) clients.
- add tests for the fixes of this commit.
The scan key module API provides the scan callback with the current
field name and value (if it exists). Those arguments are RedisModuleString*
which means it supposes to point to robj which is encoded as a string.
Using createStringObjectFromLongLong function might return robj that
points to an integer and so break a module that tries for example to
use RedisModule_StringPtrLen on the given field/value.
The PR introduces a fix that uses the createObject function and sdsfromlonglong function.
Using those function promise that the field and value pass to the to the
scan callback will be Strings.
The PR also changes the Scan test module to use RedisModule_StringPtrLen
to catch the issue. without this, the issue is hidden because
RedisModule_ReplyWithString knows to handle integer encoding of the
given robj (RedisModuleString).
The PR also introduces a new test to verify the issue is solved.
apparently when running tests in parallel (the default of --clients 16),
there's a chance for two tests to use the same port.
specifically, one test might shutdown a master and still have the
replica up, and then another test will re-use the port number of master
for another master, and then that replica will connect to the master of
the other test.
this can cause a master to count too many full syncs and fail a test if
we run the tests with --single integration/psync2 --loop --stop
see Probmem 2 in #7314
There's a rare case which leads to stagnation in the defragger, causing
it to keep scanning the keyspace and do nothing (not moving any
allocation), this happens when all the allocator slabs of a certain bin
have the same % utilization, but the slab from which new allocations are
made have a lower utilization.
this commit fixes it by removing the current slab from the overall
average utilization of the bin, and also eliminate any precision loss in
the utilization calculation and move the decision about the defrag to
reside inside jemalloc.
and also add a test that consistently reproduce this issue.
Seems like on some systems choosing specific TLS v1/v1.1 versions no
longer works as expected. Test is reduced for v1.2 now which is still
good enough to test the mechansim, and matters most anyway.
Currently, there are several types of threads/child processes of a
redis server. Sometimes we need deeply optimise the performance of
redis, so we would like to isolate threads/processes.
There were some discussion about cpu affinity cases in the issue:
https://github.com/antirez/redis/issues/2863
So implement cpu affinity setting by redis.conf in this patch, then
we can config server_cpulist/bio_cpulist/aof_rewrite_cpulist/
bgsave_cpulist by cpu list.
Examples of cpulist in redis.conf:
server_cpulist 0-7:2 means cpu affinity 0,2,4,6
bio_cpulist 1,3 means cpu affinity 1,3
aof_rewrite_cpulist 8-11 means cpu affinity 8,9,10,11
bgsave_cpulist 1,10-11 means cpu affinity 1,10,11
Test on linux/freebsd, both work fine.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
STRALGO should be a container for mostly read-only string
algorithms in Redis. The algorithms should have two main
characteristics:
1. They should be non trivial to compute, and often not part of
programming language standard libraries.
2. They should be fast enough that it is a good idea to have optimized C
implementations.
Next thing I would love to see? A small strings compression algorithm.
this test is time sensitive and it sometimes fail to pass below the
latency threshold, even on strong machines.
this test was the reson we're running just 2 parallel tests in the
github actions CI, revering this.
There is an inherent race between the deferring client and the
"main" client of the test: While the deferring client issues a blocking
command, we can't know for sure that by the time the "main" client
tries to issue another command (Usually one that unblocks the deferring
client) the deferring client is even blocked...
For lack of a better choice this commit uses TCL's 'after' in order
to give some time for the deferring client to issues its blocking
command before the "main" client does its thing.
This problem probably exists in many other tests but this commit
tries to fix blockonkeys.tcl
By using a "circular BRPOPLPUSH"-like scenario it was
possible the get the same client on db->blocking_keys
twice (See comment in moduleTryServeClientBlockedOnKey)
The fix was actually already implememnted in
moduleTryServeClientBlockedOnKey but it had a bug:
the funxction should return 0 or 1 (not OK or ERR)
Other changes:
1. Added two commands to blockonkeys.c test module (To
reproduce the case described above)
2. Simplify blockonkeys.c in order to make testing easier
3. cast raxSize() to avoid warning with format spec
Makse sure call() doesn't wrap replicated commands with
a redundant MULTI/EXEC
Other, unrelated changes:
1. Formatting compiler warning in INFO CLIENTS
2. Use CLIENT_ID_AOF instead of UINT64_MAX
First, we must parse the IDs, so that we abort ASAP.
The return value of this command cannot be an error if
the client successfully acknowledged some messages,
so it should be executed in a "all or nothing" fashion.
the AOF will be loaded successfully, but the stream will be missing,
i.e inconsistencies with the original db.
this was because XADD with id of 0-0 would error.
add a test to reproduce.
Redis refusing to run MULTI or EXEC during script timeout may cause partial
transactions to run.
1) if the client sends MULTI+commands+EXEC in pipeline without waiting for
response, but these arrive to the shards partially while there's a busy script,
and partially after it eventually finishes: we'll end up running only part of
the transaction (since multi was ignored, and exec would fail).
2) similar to the above if EXEC arrives during busy script, it'll be ignored and
the client state remains in a transaction.
the 3rd test which i added for a case where MULTI and EXEC are ok, and
only the body arrives during busy script was already handled correctly
since processCommand calls flagTransaction
it seems that running two clients at a time is ok too, resuces action
time from 20 minutes to 10. we'll use this for now, and if one day it
won't be enough we'll have to run just the sensitive tests one by one
separately from the others.
this commit also fixes an issue with the defrag test that appears to be
very rare.
seems that github actions are slow, using just one client to reduce
false positives.
also adding verbose, testing only on latest ubuntu, and building on
older one.
when doing that, i can reduce the test threshold back to something saner
