On some platforms strtold("+inf") with valgrind returns a non-inf result
[err]: INCRBYFLOAT does not allow NaN or Infinity in tests/unit/type/incr.tcl
Expected 'ERR*would produce*' to equal or match '1189731495357231765085759.....'
tests were sensitive to additional log lines appearing in the log
causing the search to come empty handed.
instead of just looking for the n last log lines, capture the log lines
before performing the action, and then search from that offset.
* tests/valgrind: don't use debug restart
DEBUG REATART causes two issues:
1. it uses execve which replaces the original process and valgrind doesn't
have a chance to check for errors, so leaks go unreported.
2. valgrind report invalid calls to close() which we're unable to resolve.
So now the tests use restart_server mechanism in the tests, that terminates
the old server and starts a new one, new PID, but same stdout, stderr.
since the stderr can contain two or more valgrind report, it is not enough
to just check for the absence of leaks, we also need to check for some known
errors, we do both, and fail if we either find an error, or can't find a
report saying there are no leaks.
other changes:
- when killing a server that was already terminated we check for leaks too.
- adding DEBUG LEAK which was used to test it.
- adding --trace-children to valgrind, although no longer needed.
- since the stdout contains two or more runs, we need slightly different way
of checking if the new process is up (explicitly looking for the new PID)
- move the code that handles --wait-server to happen earlier (before
watching the startup message in the log), and serve the restarted server too.
* squashme - CR fixes
In order to support the use of multi-exec in pipeline, it is important that
MULTI and EXEC are never rejected and it is easy for the client to know if the
connection is still in multi state.
It was easy to make sure MULTI and DISCARD never fail (done by previous
commits) since these only change the client state and don't do any actual
change in the server, but EXEC is a different story.
Since in the past, it was possible for clients to handle some EXEC errors and
retry the EXEC, we now can't affort to return any error on EXEC other than
EXECABORT, which now carries with it the real reason for the abort too.
Other fixes in this commit:
- Some checks that where performed at the time of queuing need to be re-
validated when EXEC runs, for instance if the transaction contains writes
commands, it needs to be aborted. there was one check that was already done
in execCommand (-READONLY), but other checks where missing: -OOM, -MISCONF,
-NOREPLICAS, -MASTERDOWN
- When a command is rejected by processCommand it was rejected with addReply,
which was not recognized as an error in case the bad command came from the
master. this will enable to count or MONITOR these errors in the future.
- make it easier for tests to create additional (non deferred) clients.
- add tests for the fixes of this commit.
The scan key module API provides the scan callback with the current
field name and value (if it exists). Those arguments are RedisModuleString*
which means it supposes to point to robj which is encoded as a string.
Using createStringObjectFromLongLong function might return robj that
points to an integer and so break a module that tries for example to
use RedisModule_StringPtrLen on the given field/value.
The PR introduces a fix that uses the createObject function and sdsfromlonglong function.
Using those function promise that the field and value pass to the to the
scan callback will be Strings.
The PR also changes the Scan test module to use RedisModule_StringPtrLen
to catch the issue. without this, the issue is hidden because
RedisModule_ReplyWithString knows to handle integer encoding of the
given robj (RedisModuleString).
The PR also introduces a new test to verify the issue is solved.
these tests create several edge cases that are otherwise uncovered (at
least not consistently) by the test suite, so although they're no longer
testing what they were meant to test, it's still a good idea to keep
them in hope that they'll expose some issue in the future.
i.e. don't start the search from scratch hitting the used ones again.
this will also reduce the likelihood of collisions (if there are any
left) by increasing the time until we re-use a port we did use in the
past.
apparently when running tests in parallel (the default of --clients 16),
there's a chance for two tests to use the same port.
specifically, one test might shutdown a master and still have the
replica up, and then another test will re-use the port number of master
for another master, and then that replica will connect to the master of
the other test.
this can cause a master to count too many full syncs and fail a test if
we run the tests with --single integration/psync2 --loop --stop
see Probmem 2 in #7314
There's a rare case which leads to stagnation in the defragger, causing
it to keep scanning the keyspace and do nothing (not moving any
allocation), this happens when all the allocator slabs of a certain bin
have the same % utilization, but the slab from which new allocations are
made have a lower utilization.
this commit fixes it by removing the current slab from the overall
average utilization of the bin, and also eliminate any precision loss in
the utilization calculation and move the decision about the defrag to
reside inside jemalloc.
and also add a test that consistently reproduce this issue.
with the original version of 6.0.0, this test detects an excessive full
sync.
with the fix in 1a7cd2c0e, this test detects memory corruption,
especially when using libc allocator with or without valgrind.
this test which has coverage for varoius flows of diskless master was
failing randomly from time to time.
the failure was:
[err]: diskless all replicas drop during rdb pipe in tests/integration/replication.tcl
log message of '*Diskless rdb transfer, last replica dropped, killing fork child*' not found
what seemed to have happened is that the master didn't detect that all
replicas dropped by the time the replication ended, it thought that one
replica is still connected.
now the test takes a few seconds longer but it seems stable.
This bug was introduced by a recent change in which readQueryFromClient
is using freeClientAsync, and despite the fact that now
freeClientsInAsyncFreeQueue is in beforeSleep, that's not enough since
it's not called during loading in processEventsWhileBlocked.
furthermore, afterSleep was called in that case but beforeSleep wasn't.
This bug also caused slowness sine the level-triggered mode of epoll
kept signaling these connections as readable causing us to keep doing
connRead again and again for ll of these, which keep accumulating.
now both before and after sleep are called, but not all of their actions
are performed during loading, some are only reserved for the main loop.
fixes issue #7215
Seems like on some systems choosing specific TLS v1/v1.1 versions no
longer works as expected. Test is reduced for v1.2 now which is still
good enough to test the mechansim, and matters most anyway.
* fix memlry leaks with diskless replica short read.
* fix a few timing issues with valgrind runs
* fix issue with valgrind and watchdog schedule signal
about the valgrind WD issue:
the stack trace test in logging.tcl, has issues with valgrind:
==28808== Can't extend stack to 0x1ffeffdb38 during signal delivery for thread 1:
==28808== too small or bad protection modes
it seems to be some valgrind bug with SA_ONSTACK.
SA_ONSTACK seems unneeded since WD is not recursive (SA_NODEFER was removed),
also, not sure if it's even valid without a call to sigaltstack()
Currently, there are several types of threads/child processes of a
redis server. Sometimes we need deeply optimise the performance of
redis, so we would like to isolate threads/processes.
There were some discussion about cpu affinity cases in the issue:
https://github.com/antirez/redis/issues/2863
So implement cpu affinity setting by redis.conf in this patch, then
we can config server_cpulist/bio_cpulist/aof_rewrite_cpulist/
bgsave_cpulist by cpu list.
Examples of cpulist in redis.conf:
server_cpulist 0-7:2 means cpu affinity 0,2,4,6
bio_cpulist 1,3 means cpu affinity 1,3
aof_rewrite_cpulist 8-11 means cpu affinity 8,9,10,11
bgsave_cpulist 1,10-11 means cpu affinity 1,10,11
Test on linux/freebsd, both work fine.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Now both master and replicas keep track of the last replication offset
that contains meaningful data (ignoring the tailing pings), and both
trim that tail from the replication backlog, and the offset with which
they try to use for psync.
the implication is that if someone missed some pings, or even have
excessive pings that the promoted replica has, it'll still be able to
psync (avoid full sync).
the downside (which was already committed) is that replicas running old
code may fail to psync, since the promoted replica trims pings form it's
backlog.
This commit adds a test that reproduces several cases of promotions and
demotions with stale and non-stale pings
Background:
The mearningful offset on the master was added recently to solve a problem were
the master is left all alone, injecting PINGs into it's backlog when no one is
listening and then gets demoted and tries to replicate from a replica that didn't
have any of the PINGs (or at least not the last ones).
however, consider this case:
master A has two replicas (B and C) replicating directly from it.
there's no traffic at all, and also no network issues, just many pings in the
tail of the backlog. now B gets promoted, A becomes a replica of B, and C
remains a replica of A. when A gets demoted, it trims the pings from its
backlog, and successfully replicate from B. however, C is still aware of
these PINGs, when it'll disconnect and re-connect to A, it'll ask for something
that's not in the backlog anymore (since A trimmed the tail of it's backlog),
and be forced to do a full sync (something it didn't have to do before the
meaningful offset fix).
Besides that, the psync2 test was always failing randomly here and there, it
turns out the reason were PINGs. Investigating it shows the following scenario:
cycle 1: redis #1 is master, and all the rest are direct replicas of #1
cycle 2: redis #2 is promoted to master, #1 is a replica of #2 and #3 is replica of #1
now we see that when #1 is demoted it prints:
17339:S 21 Apr 2020 11:16:38.523 * Using the meaningful offset 3929963 instead of 3929977 to exclude the final PINGs (14 bytes difference)
17339:S 21 Apr 2020 11:16:39.391 * Trying a partial resynchronization (request e2b3f8817735fdfe5fa4626766daa938b61419e5:3929964).
17339:S 21 Apr 2020 11:16:39.392 * Successful partial resynchronization with master.
and when #3 connects to the demoted #2, #2 says:
17339:S 21 Apr 2020 11:16:40.084 * Partial resynchronization not accepted: Requested offset for secondary ID was 3929978, but I can reply up to 3929964
so the issue here is that the meaningful offset feature saved the day for the
demoted master (since it needs to sync from a replica that didn't get the last
ping), but it didn't help one of the other replicas which did get the last ping.
STRALGO should be a container for mostly read-only string
algorithms in Redis. The algorithms should have two main
characteristics:
1. They should be non trivial to compute, and often not part of
programming language standard libraries.
2. They should be fast enough that it is a good idea to have optimized C
implementations.
Next thing I would love to see? A small strings compression algorithm.
