In a code example, using RedisModule_FreeString instead of
RedisModule_Free makes it behave correctly regardless of whether
automatic memory is used or not.
server.client_pause_end_time is uninitialized, or actually 0, at startup,
which means this method would think the timeout was reached
and go look for paused clients.
This causes no harm since unpauseClients will not find any paused clients.
The code used to decide on the next time to wake on a timer with
microsecond accuracy, but when deciding to go to sleep it used
milliseconds accuracy (with truncation), this means that it would wake
up too early, see that there's no timer to process, and go to sleep
again for 0ms again and again until the right microsecond arrived.
i.e. a timer for 100ms, would sleep for 99ms, but then do a busy loop
through the kernel in the last millisecond, triggering many calls to
beforeSleep.
The fix is to change all the logic in ae.c to work with microseconds,
which is good since most of the ae backends support micro (or even nano)
seconds. however the epoll backend, doesn't support micro, so to avoid
this problem it needs to round upwards, rather than truncate.
Issue created by the monotonic timer PR #7644 (redis 6.2)
Before that, all the timers in ae.c were in milliseconds (using
mstime), so when it requested the backend to sleep till the next timer
event, it would have worked ok.
The bio aof fsync fd may be closed by main thread (AOFRW done handler)
and even possibly reused for another socket, pipe, or file.
This can can an EBADF or EINVAL fsync error, which will lead to -MISCONF errors failing all writes.
We just ignore these errno because aof fsync did not really fail.
We handle errno when fsyncing aof in bio, so we could know the real reason
when users get -MISCONF Errors writing to the AOF file error
Issue created with #8419
Fix out of range error messages to be clearer (avoid mentioning 9223372036854775807)
* Fix XAUTOCLAIM COUNT option confusing error msg
* Fix other RPOP and alike error message to mention positive
With this fix, module data type registration will fail if the load or save callbacks are not defined, or the optional aux load and save callbacks are not either both defined or both missing.
Background:
Redis 6.2 added ACL control for pubsub channels (#7993), which were supposed
to be permissive by default to retain compatibility with redis 6.0 ACL.
But due to a bug, only newly created users got this `acl-pubsub-default` applied,
while overwritten (updated) users got reset to `resetchannels` (denied).
Since the "default" user exists before loading the config file,
any ACL change to it, results in an update / overwrite.
So when a "default" user is loaded from config file or include ACL
file with no channels related rules, the user will not have any
permissions to any channels. But other users will have default
permissions to any channels.
When upgraded from 6.0 with config rewrite, this will lead to
"default" user channels permissions lost.
When users are loaded from include file, then call "acl load", users
will also lost channels permissions.
Similarly, the `reset` ACL rule, would have reset the user to be denied
access to any channels, ignoring `acl-pubsub-default` and breaking
compatibility with redis 6.0.
The implication of this fix is that it regains compatibility with redis 6.0,
but breaks compatibility with redis 6.2.0 and 2.0.1. e.g. after the upgrade,
the default user will regain access to pubsub channels.
Other changes:
Additionally this commit rename server.acl_pubusub_default to
server.acl_pubsub_default and fix typo in acl tests.
Previously (and by default after commit) when master loose its last slot
(due to migration, for example), its replicas will migrate to new last slot
holder.
There are cases where this is not desired:
* Consolidation that results with removed nodes (including the replica, eventually).
* Manually configured cluster topologies, which the admin wishes to preserve.
Needlessly migrating a replica triggers a full synchronization and can have a negative impact, so
we prefer to be able to avoid it where possible.
This commit adds 'cluster-allow-replica-migration' configuration option that is
enabled by default to preserve existed behavior. When disabled, replicas will
not be auto-migrated.
Fixes#4896
Co-authored-by: Oran Agra <oran@redislabs.com>
In `aof.c`, we call fsync when stop aof, and now print a log to let user know that if fail.
In `cluster.c`, we now return error, the calling function already handles these write errors.
In `redis-cli.c`, users hope to save rdb, we now print a message if fsync failed.
In `rio.c`, we now treat fsync errors like we do for write errors.
In `server.c`, we try to fsync aof file when shutdown redis, we only can print one log if fail.
In `bio.c`, if failing to fsync aof file, we will set `aof_bio_fsync_status` to error , and reject writing just like last writing aof error, moreover also set INFO command field `aof_last_write_status` to error.
This command used to return the last scanned entry id as the cursor,
instead of the next one to be scanned.
so in the next call, the user could / should have sent `(cursor` and not
just `cursor` if he wanted to avoid scanning the same record twice.
Scanning the record twice would look odd if someone is checking what
exactly was scanned, but it also has a side effect of incrementing the
delivery count twice.
If GT/LT fails the operation we need to reply with
nill (like failure due to NX).
Other changes:
Add the missing $encoding suffix to many zset tests
Note: there's a behavior change just in case of INCR + GT/LT that fails.
The old code was replying with the wrong (rejected) score, and now it'll reply with nil.
Note that that's anyway a corner case so this "behavior change" shouldn't have too much affect.
Using GT/LT with INCR has a predictable result even before we run the command
(INCR GT will only only / always fail if the increment is negative).
The implications of this change is just that in the past when a config file was missing,
in some cases it was exiting before printing the sever startup prints and sometimes after,
and now it'll always exit before printing them.
There are 2 common range comparators for skiplist: zslValueGteMin and
zslValueLteMax, but they're not being reused in zslDeleteRangeByScore
This is a small change to make code cleaner.
this is a followup PR for #8699
instead of copying the deferred reply data to the previous node only if it has room for the entire thing,
we can now split the new payload, put part of it into the spare space in the prev node,
and the rest may fit into the next node.
The 'sentinel replicas <master>' command will ignore replicas with
`replica-announced` set to no.
The goal of disabling the config setting replica-announced is to allow ghost
replicas. The replica is in the cluster, synchronize with its master, can be
promoted to master and is not exposed to sentinel clients. This way, it is
acting as a live backup or living ghost.
In addition, to prevent the replica to be promoted as master, set
replica-priority to 0.
The cluster bus is established over TLS or non-TLS depending on the configuration tls-cluster. The client ports distributed in the cluster and sent to clients are assumed to be TLS or non-TLS also depending on tls-cluster.
The cluster bus is now extended to also contain the non-TLS port of clients in a TLS cluster, when available. The non-TLS port of a cluster node, when available, is sent to clients connected without TLS in responses to CLUSTER SLOTS, CLUSTER NODES, CLUSTER SLAVES and MOVED and ASK redirects, instead of the TLS port.
The user was able to override the client port by defining cluster-announce-port. Now cluster-announce-tls-port is added, so the user can define an alternative announce port for both TLS and non-TLS clients.
Fixes#8134
the bug was also discussed in #8716, and was solved in #8719, but incompletely:
when the server is started, and the save option is default, if you issue the " config set save "" "
to change the save option, and then issue the “config rewrite” command, the " save "" " won't be saved.
'processCommandAndResetClient' returns 1 if client is dead. It does it
by checking if serve.current_client is NULL. On script timeout, Redis will re-enter
'processCommandAndResetClient' and when finish we will set server.current_client
to NULL. This will cause later to falsely return 1 and think that the client that
sent the timed-out script is dead (Redis to stop reading from the client buffer).
In activeDefragSdsListAndDict when defrag list key sucess, the key
in dict is also replaced. Then the corresponding dictEntry is
defraged. But the dictEntry will be defraged in next step by defrag
the dict values too.
Add publish channel permissions check in processCommand.
processCommand didn't check publish channel permissions, so we can
queue a publish command in a transaction. But when exec the transaction,
it will fail with -NOPERM.
We also union keys/commands/channels permissions check togegher in
ACLCheckAllPerm. Remove pubsubCheckACLPermissionsOrReply in
publishCommand/subscribeCommand/psubscribeCommand. Always
check permissions in processCommand/execCommand/
luaRedisGenericCommand.
* SLOWLOG didn't record anything for blocked commands because the client
was reset and argv was already empty. there was a fix for this issue
specifically for modules, now it works for all blocked clients.
* The original command argv (before being re-written) was also reset
before adding the slowlog on behalf of the blocked command.
* Latency monitor is now updated regardless of the slowlog flags of the
command or its execution (their purpose is to hide sensitive info from
the slowlog, not hide the fact the latency happened).
* Latency monitor now uses real_cmd rather than c->cmd (which may be
different if the command got re-written, e.g. GEOADD)
Changes:
* Unify shared code between slowlog insertion in call() and
updateStatsOnUnblock(), hopefully prevent future bugs from happening
due to the later being overlooked.
* Reset CLIENT_PREVENT_LOGGING in resetClient rather than after command
processing.
* Add a test for SLOWLOG and BLPOP
Notes:
- real_cmd == c->lastcmd, except inside MULTI and Lua.
- blocked commands never happen in these cases (MULTI / Lua)
- real_cmd == c->cmd, except for when the command is rewritten (e.g.
GEOADD)
- blocked commands (currently) are never rewritten
- other than the command's CLIENT_PREVENT_LOGGING, and the
execution flag CLIENT_PREVENT_LOGGING, other cases that we want to
avoid slowlog are on AOF loading (specifically CMD_CALL_SLOWLOG will
be off when executed from execCommand that runs from an AOF)
the corrupt-dump-fuzzer test found a case where an access to a corrupt
stream would have caused accessing to uninitialized memory.
now it'll panic instead.
The issue was that there was a stream that says it has more than 0
records, but looking for the max ID came back empty handed.
p.s. when sanitize-dump-payload is used, this corruption is detected,
and the RESTORE command is gracefully rejected.
We sometimes see the crash report saying we were killed by a random
process even in cases where the crash was spontanius in redis.
for instance, crashes found by the corrupt-dump test.
It looks like this si_pid is sometimes left uninitialized, and a good
way to tell if the crash originated in redis or trigged by outside is to
look at si_code, real signal codes are always > 0, and ones generated by
kill are have si_code of 0 or below.
Reading CoW from /proc/<pid>/smaps can be slow with large processes on
some platforms.
This measures the time it takes to read CoW info and limits the duty
cycle of future updates to roughly 1/100.
As current_cow_size no longer represnets a current, fixed interval value
there is also a new current_cow_size_age field that provides information
about the age of the size value, in seconds.
pcall function runs another LUA function in protected mode, this means
that any error will be caught by this function and will not stop the LUA
execution. The script kill mechanism uses error to stop the running script.
Scripts that uses pcall can catch the error raise by the script kill mechanism,
this will cause a script like this to be unkillable:
local f = function()
while 1 do
redis.call('ping')
end
end
while 1 do
pcall(f)
end
The fix is, when we want to kill the script, we set the hook function to be invoked
after each line. This will promise that the execution will get another
error before it is able to enter the pcall function again.
Some operating systems (e.g., NetBSD and OpenBSD) have switched to
using a 64-bit integer for time_t on all platforms. This results in currently
harmless compiler warnings due to potential truncation.
These changes fix these minor portability concerns.
* Fix format string for systems with 64 bit time
* use llabs to avoid truncation with 64 bit time
In the long term we may want to move away from anet completely and have
everything implemented natively in connection.c, instead of having an
extra layer.
For now, just get rid of unused code.
In certain scenario start_server may think it failed to start a redis server
although it started successfully. in these cases, it'll not terminate it, and
it'll remain running when the test is over.
In start_server if config doesn't have bind (the minimal.conf in introspection.tcl),
it will try to bind ipv4 and ipv6. One may success while other fails. It will
output "Could not create server TCP listening socket".
wait_server_started uses this message to check whether instance started
successfully. So it will consider that it failed even though redis started successfully.
Additionally, in some cases it wasn't clear to users why the server exited,
since the warning message printed to the log, could in some cases be harmless,
and in some cases fatal.
This PR adds makes a clear distinction between a warning log message and
a fatal one, and changes the test suite to look for the fatal message.
lookupKeyReadOrReply and lookupKeyWriteOrReply might decide to reply to the user
with the given robj reply. This reply might be an error reply and if so addReply
function is used instead of addReplyErrorObject which will cause the error reply not
to be counted on stats. The fix checks the first char in the reply and if its '-' (error)
it uses addReplyErrorObject.
REDISMODULE_CTX_FLAGS_EVICT and REDISMODULE_CTX_FLAGS_MAXMEMORY
shouldn't be set when the module is run inside a replica that doesn't do eviction.
one may argue that the database is under eviction (the master does eviction and sends DELs to the replica).
but on the other hand, we don't really know the master's configuration.
all that matters is if the current instance does evictions or not.
listenToPort attempts to gracefully handle and ignore certain errors but does not store errno prior to logging, which in turn calls several libc functions that may overwrite errno.
This has been discovered due to libmusl strftime() always returning with errno set to EINVAL, which resulted with docker-library/redis#273.
1. moduleReplicateMultiIfNeeded should use server.in_eval like
moduleHandlePropagationAfterCommandCallback
2. server.in_eval could have been set to 1 and not reset back
to 0 (a lot of missed early-exits after in_eval is already 1)
Note: The new assertions in processCommand cover (2) and I added
two module tests to cover (1)
Implications:
If an EVAL that failed (and thus left server.in_eval=1) runs before a module
command that replicates, the replication stream will contain MULTI (because
moduleReplicateMultiIfNeeded used to check server.lua_caller which is NULL
at this point) but not EXEC (because server.in_eval==1)
This only affects modules as module.c the only user of server.in_eval.
Affects versions 6.2.0, 6.2.1
On a replica we do accept connections, even though commands accessing
the database will operate in read-only mode. But the server is still
already operational and processing commands.
Not sending the readiness notification means that on a HA setup where
the nodes all start as replicas (with replicaof in the config) with
a replica that cannot connect to the master server and which might not
come back in a predictable amount of time or at all, the service
supervisor will end up timing out the service and terminating it, with
no option to promote it to be the main instance. This seems counter to
what the readiness notification is supposed to be signaling.
Instead send the readiness notification when we start accepting
commands, and then send the various server status changes as that.
Fixes: commit 641c64ada1
Fixes: commit dfb598cf33
Bug 1:
When a module ctx is freed moduleHandlePropagationAfterCommandCallback
is called and handles propagation. We want to prevent it from propagating
commands that were not replicated by the same context. Example:
1. module1.foo does: RM_Replicate(cmd1); RM_Call(cmd2); RM_Replicate(cmd3)
2. RM_Replicate(cmd1) propagates MULTI and adds cmd1 to also_propagagte
3. RM_Call(cmd2) create a new ctx, calls call() and destroys the ctx.
4. moduleHandlePropagationAfterCommandCallback is called, calling
alsoPropagates EXEC (Note: EXEC is still not written to socket),
setting server.in_trnsaction = 0
5. RM_Replicate(cmd3) is called, propagagting yet another MULTI (now
we have nested MULTI calls, which is no good) and then cmd3
We must prevent RM_Call(cmd2) from resetting server.in_transaction.
REDISMODULE_CTX_MULTI_EMITTED was revived for that purpose.
Bug 2:
Fix issues with nested RM_Call where some have '!' and some don't.
Example:
1. module1.foo does RM_Call of module2.bar without replication (i.e. no '!')
2. module2.bar internally calls RM_Call of INCR with '!'
3. at the end of module1.foo we call RM_ReplicateVerbatim
We want the replica/AOF to see only module1.foo and not the INCR from module2.bar
Introduced a global replication_allowed flag inside RM_Call to determine
whether we need to replicate or not (even if '!' was specified)
Other changes:
Split beforePropagateMultiOrExec to beforePropagateMulti afterPropagateExec
just for better readability
Have a clear separation between in and out flags
Other changes:
delete dead code in RM_ZsetIncrby: if zsetAdd returned error (happens only if
the result of the operation is NAN or if score is NAN) we return immediately so
there is no way that zsetAdd succeeded and returned NAN in the out-flags
`master_sync_perc` and `loading_loaded_perc` don't have that sign,
and i think the info field should be a raw floating point number (the name suggests its units).
we already have `used_memory_peak_perc` and `used_memory_dataset_perc` which do add the `%` sign, but:
1) i think it was a mistake but maybe too late to fix now, and maybe not too late to fix for `current_fork_perc`
2) it is more important to be consistent with the two other "progress" "prec" metrics, and not with the "utilization" metric.
1. Add `redis-server test all` support to run all tests.
2. Add redis test to daily ci.
3. Add `--accurate` option to run slow tests for more iterations (so that
by default we run less cycles (shorter time, and less prints).
4. Move dict benchmark to REDIS_TEST.
5. fix some leaks in tests
6. make quicklist tests run on a specific fill set of options rather than huge ranges
7. move some prints in quicklist test outside their loops to reduce prints
8. removing sds.h from dict.c since it is now used in both redis-server and
redis-cli (uses hiredis sds)
The obtained process_rss was incorrect (the OS reports pages, not
bytes), resulting with many other fields getting corrupted.
This has been tested on FreeBSD but not other platforms.
When a quicklist has quicklist->compress * 2 nodes, then call
__quicklistCompress, all nodes will be decompressed and the middle
two nodes will be recompressed again. This violates the fact that
quicklist->compress * 2 nodes are uncompressed. It's harmless
because when visit a node, we always try to uncompress node first.
This only happened when a quicklist has quicklist->compress * 2 + 1
nodes, then delete a node. For other scenarios like insert node and
iterate this will not happen.
Scenario:
1. A module client is blocked on keys with a timeout
2. Shortly before the timeout expires, the key is being populated and signaled
as ready
3. Redis calls moduleTryServeClientBlockedOnKey (which replies to client) and
then moduleUnblockClient
4. moduleUnblockClient doesn't really unblock the client, it writes to
server.module_blocked_pipe and only marks the BC as unblocked.
5. beforeSleep kics in, by this time the client still exists and techincally
timed-out. beforeSleep replies to the timeout client (double reply) and
only then moduleHandleBlockedClients is called, reading from module_blocked_pipe
and calling unblockClient
The solution is similar to what was done in moduleTryServeClientBlockedOnKey: we
should avoid re-processing an already-unblocked client
* The `redis-cli --scan` output should honor output mode (set explicitly or implicitly), and quote key names when not in raw mode.
* Technically this is a breaking change, but it should be very minor since raw mode is by default on for non-tty output.
* It should only affect TTY output (human users) or non-tty output if `--no-raw` is specified.
* Added `--quoted-input` option to treat all arguments as potentially quoted strings.
* Added `--quoted-pattern` option to accept a potentially quoted pattern.
Unquoting is applied to potentially quoted input only if single or double quotes are used.
Fixes#8561, #8563
When the length of the quicklist is 1(only one zipmap), the rotate operation will cause
memory overlap when moving an entity from the tail of the zipmap to the head.
quicklistRotate is a dead code, so it has no impact on the existing code.
Since the API declared (as #define) in redismodule.h and uses
the CLIENT_ID_AOF that declared in the server.h, when
a module will want to make use of this API, it will get a compilation
error (module doesn't include the server.h).
The API was broken by d6eb3af (failed attempt for a cleanup).
Revert to the original version of RedisModule_IsAOFClient
that uses UINT64_MAX instead of CLIENT_ID_AOF
When no connected clients variables stopped being updated instead of being zeroed over time.
The other changes are cleanup and optimization (avoiding an unnecessary division per client)
When sanitizing the stream listpack, we need to count the deleted records too.
otherwise the last line that checks the next pointer fails.
Add test to cover that state in the stream tests.
Add ability to modify port, tls-port and bind configurations by CONFIG SET command.
To simplify the code and make it cleaner, a new structure
added, socketFds, which contains the file descriptors array and its counter,
and used for TCP, TLS and Cluster sockets file descriptors.
Because when the RM_Call is invoked. It will create a faker client.
The point is client connection is NULL, so server will crash in connGetInfo
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
The arm_thread_state64_get_pc used later in the file is defined
in mach kernel headers. Apparently they get included if you use
the system malloc but not if you use jemalloc.
DB ID used to be parsed as a long for SWAPDB command, now
make it into an int to be consistent with other commands that parses
the DB ID argument like SELECT, MOVE, COPY. See #8085
The implication is that the error message when the provided db index
is greater than 4M changes slightly.
This could happen on an invalid use, when trying to create a cluster with
a single node and provide it's address 3 time to satisfy redis-cli requirements.
A single client pointer is added in the server struct. This is
initialized by the first RM_Call() and reused for every subsequent
RM_Call() except if it's already in use, which means that it's not
used for (recursive) module calls to modules. For these, a new
"fake" client is created each time.
Other changes:
* Avoid allocating a dict iterator in pubsubUnsubscribeAllChannels
when not needed
* Add better control of malloc_usable_size() usage.
* Use malloc_usable_size on alpine libc daily job.
* Add no-malloc-usable-size daily jobs.
* Fix zmalloc(0) when HAVE_MALLOC_SIZE is undefined.
In order to align with the jemalloc behavior, this should never return
NULL or OOM panic.
This commit fixes a bug in what's currently dead code in redis.
In quicklistDelRange when delete entry from entry.offset to node tail,
extent only need gte node->count - entry.offset, not node->count
Co-authored-by: Yoav Steinberg <yoav@redislabs.com>
* Remove linux/version.h dependency.
This introduces unnecessary dependencies, and generally not a good idea
as the platform we build on may be different than the platform we run
on.
To determine if sync_file_range exists we can simply rely on header file
hints.
* Fix setproctitle() on libmusl.
The previous ifdef checks were a bit too strict for no apparent
reason.
* Fix tests failure on Linux with no backtrace.
* Add alpine daily CI job.
On 32-bit systems, setting the proto-max-bulk-len config parameter to a high value may result with integer overflow and a subsequent heap overflow when parsing an input bulk (CVE-2021-21309).
This fix has two parts:
Set a reasonable limit to the config parameter.
Add additional checks to prevent the problem in other potential but unknown code paths.
This validation was only done for sub-commands and not for commands.
These would have been valid (not produce any error)
ACL SETUSER bob +@all +client
ACL SETUSER bob +client +client
so no reason for this one to fail:
ACL SETUSER bob +client +client|id
One example why this is needed is that pfdebug wasn't part of the @hyperloglog
group and now it is. so something like:
acl setuser user1 +@hyperloglog +pfdebug|test
would have succeeded in early 6.0.x, and fail in 6.2 RC3
Co-authored-by: Harkrishn Patro <harkrisp@amazon.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
SRANDMEMBER with negative count (non unique) can return the same member
multiple times, and the order of elements in the returned collection matters.
For these reasons returning a RESP3 Set type is not valid for the negative
count, but also not really valid for the positive (unique) variant either (the
command returns an array of random picks, not a set)
This PR also contains a minor optimization for SRANDMEMBER, HRANDFIELD,
and ZRANDMEMBER, to avoid the temporary dict from being rehashed while it grows.
Co-authored-by: Oran Agra <oran@redislabs.com>
Originally this was limited to IPv6 address length, but effectively it
has been used for host names and now that Sentinel accepts that as well
we need to be able to store full hostnames.
Fixes#8507
When redis responds with tracking-redir-broken push message (RESP3),
it was responding with a broken protocol: an array of 3 elements, but only
pushes 2 elements.
Some bugs in the test make this pass. Read the push reply
will consume an extra reply, because the reply length is 3, but there
are only two elements, so the next reply will be treated as third
element. So the test is corrected too.
Other changes:
* checkPrefixCollisionsOrReply success should return 1 instead of -1,
this bug didn't have any implications.
* improve client tracking tests to validate more of the response it reads.
Respond with error if expire time overflows from positive to negative of vice versa.
* `SETEX`, `SET EX`, `GETEX` etc would have already error on negative value,
but now they would also error on overflows (i.e. when the input was positive but
after the manipulation it becomes negative, which would have passed before)
* `EXPIRE` and `EXPIREAT` was ok taking negative values (would implicitly delete
the key), we keep that, but we do error if the user provided a value that changes
sign when manipulated (except the case of changing sign when `basetime` is added)
Signed-off-by: Gnanesh <gnaneshkunal@outlook.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
The `dict` field `iterators` is misleading and incorrect.
This variable is used for 1 purpose - to pause rehashing.
The current `iterators` field doesn't actually count "iterators".
It counts "safe iterators". But - it doesn't actually count safe iterators
either. For one, it's only incremented once the safe iterator begins to
iterate, not when it's created. It's also incremented in `dictScan` to
prevent rehashing (and commented to make it clear why `iterators` is
being incremented during a scan).
This update renames the field as `pauserehash` and creates 2 helper
macros `dictPauseRehashing(d)` and `dictResumeRehashing(d)`
Avoid repeated reallocs growing the listpack while entries are being added.
This is done by pre-allocating the listpack to near maximum size, and using
malloc_size to check if it needs realloc or not.
When the listpack reaches the maximum number of entries, we shrink it to fit it's used size.
Co-authored-by: Viktor Söderqvist <viktor@zuiderkwast.se>
Co-authored-by: Oran Agra <oran@redislabs.com>
* Adding current_save_keys_total and current_save_keys_processed info fields.
Present in replication, BGSAVE and AOFRW.
* Changing RM_SendChildCOWInfo() to RM_SendChildHeartbeat(double progress)
* Adding new info field current_fork_perc. Present in Replication, BGSAVE, AOFRW,
and module forks.
Avoids memmove and reallocs when replacing a ziplist element of the
same encoded size as the new value.
Affects HSET, HINRBY, HINCRBYFLOAT (via hashTypeSet) and LSET (via
quicklistReplaceAtIndex).
The added flag affects the return value of RM_HashSet() to include
the number of inserted fields, in addition to updated and deleted
fields.
errno is set on errors, tests are added and documentation updated.
Fix the pointers to the slot hash tags in the case of prefixed commands usage
i.e. AUTH / SELECT
It adjusts the pointers to the slot hash tags in the case of prefixed commands
usage as soon as we get the 1st reply (same like we already did for the random
strings within the command )
We need to store replicas referenced by their announced address (IP or
address). Before that, if hostnames were used and the IP address
changed, duplicate entries would have been created.
- removes time sensitive checks from block on background tests during leak checks.
- fix uninitialized variable on RedisModuleBlockedClient() when calling
RM_BlockedClientMeasureTimeEnd() without RM_BlockedClientMeasureTimeStart()
1. Rename 18-cluster-nodes-slots.tcl to 19-cluster-nodes-slots.tcl.
it was conflicting with another test prefixed by 18
2. Release memory on exit in redis-cli.c.
3. Fix freeConvertedSds indentation.
When (remaining == (total_size - index)), element will definitely be random to.
But when rand() == RAND_MAX, the element will miss, this will trigger assert
in serverAssert(ziplistRandomPairsUnique(zsetobj->ptr, count, keys, vals) == count).
It is inefficient to repeatedly pick a single random element from a
ziplist.
For CASE4, which is when the user requested a low number of unique
random picks from the collectoin, we used thta pattern.
Now we use a different algorithm that picks unique elements from a
ziplist, and guarentee no duplicate but doesn't provide random order
(which is only needed in the non-unique random picks case)
Unrelated changes:
* change ziplist count and indexes variables to unsigned
* solve compilation warnings about uninitialized vars in gcc 10.2
Co-authored-by: xinluton <xinluton@qq.com>
Disable certificate validation, making it possible to connect to servers
without configuring full trust chain.
The use of this option is insecure and makes the connection vulnerable
to man in the middle attacks.
Without this fix, RM_ZsetRem can leave empty sorted sets which are
not allowed to exist.
Removing from a sorted set while iterating seems to work (while
inserting causes failed assetions). RM_ZsetRangeEndReached is
modified to return 1 if the key doesn't exist, to terminate
iteration when the last element has been removed.
Changes to HRANDFIELD and ZRANDMEMBER:
* Fix risk of OOM panic when client query a very big negative count (avoid allocating huge temporary buffer).
* Fix uneven random distribution in HRANDFIELD with negative count (wasn't using dictGetFairRandomKey).
* Add tests to check an even random distribution (HRANDFIELD, SRANDMEMBER, ZRANDMEMBER).
Co-authored-by: Oran Agra <oran@redislabs.com>
Fix errors of GEOSEARCH bybox search due to:
1. projection of the box to a trapezoid (when the meter box is converted to long / lat it's no longer a box).
2. width and height mismatch
Changes:
- New GEOSEARCH point in rectangle algorithm
- Fix GEOSEARCH bybox width and height mismatch bug
- Add GEOSEARCH bybox testing to the existing "GEOADD + GEORANGE randomized test"
- Add new fuzzy test to stress test the bybox corners and edges
- Add some tests for edge cases of the bybox algorithm
Co-authored-by: Oran Agra <oran@redislabs.com>
This commit provides an optimization, in terms of time, for all GEORADIUS*
and GEOSEARCH* searches which utilize the default, sorted, COUNT clause.
This is commonly used for nearest-neighbor (top-K points closest to a given lat/lon)
searches. While the previous implementation appends all matching points to the
geoPoint array and performs pruning after-the-fact via a full sort and [0, count)-based
for-loop, this PR sorts only the required number of elements.
This optimization provides a 5-20% improvement in runtime depending on the
density of points of interest (POI) as well as the radius searched.
No performance degradation has been observed.
addReplyLongLongWithPrefix, has a check against negative length, and the code
flow removed in this commit bypasses the check.
addReplyAggregateLen has an assertion for negative length, but addReplyBulkLen
does not, so this commit fixes theoretical case of access violation (probably
unreachable though)
* The corrupt dump fuzzer found a division by zero.
* in some cases the random fields from the HRANDFIELD tests produced
fields with newlines and other special chars (due to \ char), this caused
the TCL tests to see a bulk response that has a newline in it and add {}
around it, later it can think this is a nested list. in fact the `alpha` random
string generator isn't using spaces and newlines, so it should not use `\`
either.
This commit enables tracking time of the background tasks and on replies,
opening the door for properly tracking commands that rely on blocking / background
work via the slowlog, latency history, and commandstats.
Some notes:
- The time spent blocked waiting for key changes, or blocked on synchronous
replication is not accounted for.
- **This commit does not affect latency tracking of commands that are non-blocking
or do not have background work.** ( meaning that it all stays the same with exception to
`BZPOPMIN`,`BZPOPMAX`,`BRPOP`,`BLPOP`, etc... and module's commands that rely
on background threads ).
- Specifically for latency history command we've added a new event class named
`command-unblocking` that will enable latency monitoring on commands that spawn
background threads to do the work.
- For blocking commands we're now considering the total time of a command as the
time spent on call() + the time spent on replying when unblocked.
- For Modules commands that rely on background threads we're now considering the
total time of a command as the time spent on call (main thread) + the time spent on
the background thread ( if marked within `RedisModule_MeasureTimeStart()` and
`RedisModule_MeasureTimeEnd()` ) + the time spent on replying (main thread)
To test for this feature we've added a `unit/moduleapi/blockonbackground` test that relies on
a module that blocks the client and sleeps on the background for a given time.
- check blocked command that uses RedisModule_MeasureTimeStart() is tracking background time
- check blocked command that uses RedisModule_MeasureTimeStart() is tracking background time even in timeout
- check blocked command with multiple calls RedisModule_MeasureTimeStart() is tracking the total background time
- check blocked command without calling RedisModule_MeasureTimeStart() is not reporting background time
New commands:
`HRANDFIELD [<count> [WITHVALUES]]`
`ZRANDMEMBER [<count> [WITHSCORES]]`
Algorithms are similar to the one in SRANDMEMBER.
Both return a simple bulk response when no arguments are given, and an array otherwise.
In case values/scores are requested, RESP2 returns a long array, and RESP3 a nested array.
note: in all 3 commands, the only option that also provides random order is the one with negative count.
Changes to SRANDMEMBER
* Optimization when count is 1, we can use the more efficient algorithm of non-unique random
* optimization: work with sds strings rather than robj
Other changes:
* zzlGetScore: when zset needs to convert string to double, we use safer memcpy (in
case the buffer is too small)
* Solve a "bug" in SRANDMEMBER test: it intended to test a positive count (case 3 or
case 4) and by accident used a negative count
Co-authored-by: xinluton <xinluton@qq.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
The key point is how to recover from last AOF write error, for example:
1. start redis with appendonly yes, and append some write commands
2. short write or something else error happen, `server.aof_last_write_status` changed to `C_ERR`, now redis doesn't accept write commands
3. execute `CONFIG SET appendonly no` to avoid the above problem, now redis can accept write commands again
4. disk error resolved, and execute `CONFIG SET appendonly yes` to reopen AOF, but `server.aof_last_write_status` cannot be changed to `C_OK` (if background aof rewrite run less then 1 second, it will free `server.aof_buf` and then serverCron cannot fix `aof_last_write_status`), then redis cannot accept write commands forever.
This PR use a simple way to fix it:
1. just free `server.aof_buf` when stop appendonly to save memory, if error happens in `flushAppendOnlyFile(1)`, the `server.aof_buf` may contains some data which has not be written to aof, I think we can ignore it because we turn off the appendonly.
2. reset fsync status after stop appendonly and call `flushAppendOnlyFile` only when `aof_state` is ON
3. reset `server.last_write_status` when reopen aof to accept write commands
With AOF policy of fsync "always", redis should respect the contract with the user
that on acknowledged write data is already synced on disk.
Redis was already exiting for AOF write error, but don't care about fsync failure.
So to guarantee data safe, redis should exit for fsync error too (when the AOF fsync
policy is 'always').
APIs added for these stream operations: add, delete, iterate and
trim (by ID or maxlength). The functions are prefixed by RM_Stream.
* RM_StreamAdd
* RM_StreamDelete
* RM_StreamIteratorStart
* RM_StreamIteratorStop
* RM_StreamIteratorNextID
* RM_StreamIteratorNextField
* RM_StreamIteratorDelete
* RM_StreamTrimByLength
* RM_StreamTrimByID
The type RedisModuleStreamID is added and functions for converting
from and to RedisModuleString.
* RM_CreateStringFromStreamID
* RM_StringToStreamID
Whenever the stream functions return REDISMODULE_ERR, errno is set to
provide additional error information.
Refactoring: The zset iterator fields in the RedisModuleKey struct
are wrapped in a union, to allow the same space to be used for type-
specific info for streams and allow future use for other key types.
This is both a bugfix and an enhancement.
Internally, Sentinel relies entirely on IP addresses to identify
instances. When configured with a new master, it also requires users to
specify and IP and not hostname.
However, replicas may use the replica-announce-ip configuration to
announce a hostname. When that happens, Sentinel fails to match the
announced hostname with the expected IP and considers that a different
instance, triggering reconfiguration, etc.
Another use case is where TLS is used and clients are expected to match
the hostname to connect to with the certificate's SAN attribute. To
properly implement this configuration, it is necessary for Sentinel to
redirect clients to a hostname rather than an IP address.
The new 'resolve-hostnames' configuration parameter determines if
Sentinel is willing to accept hostnames. It is set by default to no,
which maintains backwards compatibility and avoids unexpected DNS
resolution delays on systems with DNS configuration issues.
Internally, Sentinel continues to identify instances by their resolved
IP address and will also report the IP by default. The new
'announce-hostnames' parameter determines if Sentinel should prefer to
announce a hostname, when available, rather than an IP address. This
applies to addresses returned to clients, as well as their
representation in the configuration file, REPLICAOF configuration
commands, etc.
This commit also introduces SENTINEL CONFIG GET and SENTINEL CONFIG SET
which can be used to introspect or configure global Sentinel
configuration that was previously was only possible by directly
accessing the configuration file and possibly restarting the instance.
Co-authored-by: myl1024 <myl92916@qq.com>
Co-authored-by: sundb <sundbcn@gmail.com>
if option `set-proc-title' is no, then do nothing for proc title.
The reason has been explained long ago, see following:
We update redis to 2.8.8, then found there are some side effect when
redis always change the process title.
We run several slave instance on one computer, and all these salves
listen on unix socket only, then ps will show:
1 S redis 18036 1 0 80 0 - 56130 ep_pol 14:02 ? 00:00:31 /usr/sbin/redis-server *:0
1 S redis 23949 1 0 80 0 - 11074 ep_pol 15:41 ? 00:00:00 /usr/sbin/redis-server *:0
for redis 2.6 the output of ps is like following:
1 S redis 18036 1 0 80 0 - 56130 ep_pol 14:02 ? 00:00:31 /usr/sbin/redis-server /etc/redis/a.conf
1 S redis 23949 1 0 80 0 - 11074 ep_pol 15:41 ? 00:00:00 /usr/sbin/redis-server /etc/redis/b.conf
Later is more informational in our case. The situation
is worse when we manage the config and process running
state by salt. Salt check the process by running "ps |
grep SIG" (for Gentoo System) to check the running
state, where SIG is the string to search for when
looking for the service process with ps. Previously, we
define sig as "/usr/sbin/redis-server
/etc/redis/a.conf". Since the ps output is identical for
our case, so we have no way to check the state of
specified redis instance.
So, for our case, we prefer the old behavior, i.e, do
not change the process title for the main redis process.
Or add an option such as "set-proc-title [yes|no]" to
control this behavior.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
At least in one case the arm64 cow kernel bug test triggers an assert, which is a problem because it cannot be ignored like cases where the bug is found.
On older systems (Linux <4.5) madvise fails because MADV_FREE is not supported. We treat these failures as an indication the system is not affected.
Fixes#8351, #8406
This commit introduces two new command and two options for an existing command
GETEX <key> [PERSIST][EX seconds][PX milliseconds] [EXAT seconds-timestamp]
[PXAT milliseconds-timestamp]
The getexCommand() function implements extended options and variants of the GET
command. Unlike GET command this command is not read-only. Only one of the options
can be used at a given time.
1. PERSIST removes any TTL associated with the key.
2. EX Set expiry TTL in seconds.
3. PX Set expiry TTL in milliseconds.
4. EXAT Same like EX instead of specifying the number of seconds representing the
TTL (time to live), it takes an absolute Unix timestamp
5. PXAT Same like PX instead of specifying the number of milliseconds representing the
TTL (time to live), it takes an absolute Unix timestamp
Command would return either the bulk string, error or nil.
GETDEL <key>
Would delete the key after getting.
SET key value [NX] [XX] [KEEPTTL] [GET] [EX <seconds>] [PX <milliseconds>]
[EXAT <seconds-timestamp>][PXAT <milliseconds-timestamp>]
Two new options added here are EXAT and PXAT
Key implementation notes
- `SET` with `PX/EX/EXAT/PXAT` is always translated to `PXAT` in `AOF`. When relative time is
specified (`PX/EX`), replication will always use `PX`.
- `setexCommand` and `psetexCommand` would no longer need translation in `feedAppendOnlyFile`
as they are modified to invoke `setGenericCommand ` with appropriate flags which will take care of
correct AOF translation.
- `GETEX` without any optional argument behaves like `GET`.
- `GETEX` command is never propagated, It is either propagated as `PEXPIRE[AT], or PERSIST`.
- `GETDEL` command is propagated as `DEL`
- Combined the validation for `SET` and `GETEX` arguments.
- Test cases to validate AOF/Replication propagation
In activeDefragSdsListAndDict when dict_val_type is DEFRAG_SDS_DICT_VAL_VOID_PTR, it should update de->v.val not ln->value.
Because this code path will never be executed, so this bug never happened.
In some scenarios, such as remote backup, we only want to get remote
redis server db snapshot. Currently, redis-cli acts as a replica and
sends SYNC to redis, but redis still accumulates replication buffer
in the replica client output buffer, that may result in using vast
memory, or failing to transfer RDB because of client-output-buffer-limit.
In this commit, we add 'replconf rdb-only 0|1', redis doesn't send
incremental replication buffer to them if they send 'replconf rdb-only 1',
so we can reduce used memory and improve success of getting RDB.
It was confusing as to why these don't return a map type.
the reason is that order matters, so we need to make sure the client
library knows to respect it.
Added comments in the implementation and tests to cover it.
This commit fixes a well known and an annoying issue in Sentinel mode.
Cause of this issue:
Currently, Redis rewrite process works well in server mode, however in sentinel mode,
the sentinel config has variant semantics for different configurations, in example configuration
https://github.com/redis/redis/blob/unstable/sentinel.conf, we put comments on these.
However the rewrite process only treat the sentinel config as a single option. During rewrite
process, it will mess up with the lines and comments.
Approaches:
In order to solve this issue, we need to differentiate different subconfig options in sentinel separately,
for example, sentinel monitor <master-name> <ip> <redis-port> <quorum>
we can treat it as sentinel monitor option, instead of the sentinel option.
This commit also fixes the dependency issue when putting configurations in sentinel.conf.
For example before this commit,we must put
`sentinel monitor <master-name> <ip> <redis-port> <quorum>` before
`sentinel auth-pass <master-name> <password>` for a single master,
otherwise the server cannot start and will return error. This commit fixes this issue, as long as
the monitoring master was configured, no matter the sequence is, the sentinel can start and run properly.
The flag should be set before TLS negotiation begins to avoid a race
condition where a fork+exec before it is completed ends up leaking the
file descriptor.
Fixes a regression introduced due to a new (safer) way of rewriting configuration files. In the past the file was simply overwritten (same inode), but now Redis creates a new temporary file and later renames it over the old one.
The temp file typically gets created with 0600 permissions so we later fchmod it to fix that. Unlike open with O_CREAT, fchmod doesn't consider umask so we have to do that explicitly.
Fixes#8369
The output for COMMAND command was wrong for some commands.
clients can use firstkey,lastkey,step to find (some) key name arguments, and the
"movablekeys" flag to know that they can't know all (or any) of the key name arguments.
These commands had the wrong output:
1. GEORADIUS*_RO used to have "movablekeys" (which it doesn't really need)
2. XREAD and XREADGROUP used to have (1,1,1). but that's completely wrong.
3. Z*STORE used to have (0,0,0) but it can at lest give the index of the dstkey (1,1,1)
Fix broken formatting in `RM_Call` and `RM_CreateDataType`,
`RM_SubscribeToServerEvent` (nested lists, etc. in list items).
Unhide docs of `RM_LoadDataTypeFromString` and
`RM_SaveDataTypeToString` by removing blank line between docs and
function.
Clarification added to `RM__Assert`: Recommentation to use the
`RedisModule_Assert` macro instead.
All names containing underscores (variable and macro names) are
wrapped in backticks (if not already wrapped in backticks). This
prevents underscore from being interpreted as italics in some
cases.
Names including a wildcard star, e.g. RM_Defrag*(), is wrapped in
backticks (and RM replaced by RedisModule in this case). This
prevents the * from being interpreted as an italics marker.
A list item with a sublist, a paragraph and another sublist is a
combination which seems impossible to achieve with RedCarped
markdown, so the one occurrence of this is rewritten.
Various trivial changes (typos, backticks, etc.).
Ruby script:
* Replace `RM_Xyz` with `RedisModule_Xyz` in docs. (RM is correct
when refering to the C code but RedisModule is correct in the
API docs.)
* Automatic backquotes around C functions like `malloc()`.
* Turn URLs into links. The link text is the URL itself.
* Don't add backticks inside bold (**...**)
Sentinel uses execve to run scripts, so it needs to use FD_CLOEXEC
on all file descriptors, so that they're not accessible by the script it runs.
This commit includes a change to the sentinel tests, which verifies no
FDs are left opened when the script is executed.
This was a regression from #7625 (only in 6.2 RC2).
This makes it possible again to implement blocking list and zset
commands using the modules API.
This commit also includes a test case for the reverse: A module
unblocks a client blocked on BLPOP by inserting elements using
RedisModule_ListPush(). This already works, but it was untested.
Previously invalid configuration errors were not very specific and in some cases hard to understand.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
* Adds ASYNC and SYNC arguments to SCRIPT FLUSH
* Adds SYNC argument to FLUSHDB and FLUSHALL
* Adds new config to control the default behavior of FLUSHDB, FLUSHALL and SCRIPT FLUASH.
the new behavior is as follows:
* FLUSH[ALL|DB],SCRIPT FLUSH: Determine sync or async according to the
value of lazyfree-lazy-user-flush.
* FLUSH[ALL|DB],SCRIPT FLUSH ASYNC: Always flushes the database in an async manner.
* FLUSH[ALL|DB],SCRIPT FLUSH SYNC: Always flushes the database in a sync manner.
The prefix is changed from `RM_` to `module` on the following
internal functions, to prevent them from appearing in the API docs:
RM_LogRaw -> moduleLogRaw
RM_FreeCallReplyRec -> moduleFreeCallReplyRec
RM_ZsetAddFlagsToCoreFlags -> moduleZsetAddFlagsToCoreFlags
RM_ZsetAddFlagsFromCoreFlags -> moduleZsetAddFlagsFromCoreFlags
Fixes markdown formatting errors and some functions not showing
up in the generated documentation at all.
Ruby script (gendoc.rb) fixes:
* Modified automatic instertion of backquotes:
* Don't add backquotes around names which are already preceded by a
backquote. Fixes for example \`RedisModule_Reply\*\` which turning
into \`\`RedisModule_Reply\`\*\` messes up the formatting.
* Add backquotes around types such as RedisModuleString (in addition
to function names `RedisModule_[A-z()]*` and macro names
`REDISMODULE_[A-z]*`).
* Require 4 spaces indentation for disabling automatic backquotes, i.e.
code blocks. Fixes continuations of list items (indented 2 spaces).
* More permissive extraction of doc comments:
* Allow doc comments starting with `/**`.
* Make space before `*` on each line optional.
* Make space after `/*` and `/**` optional (needed when appearing on
its own line).
Markdown fixes in module.c:
* Fix code blocks not indented enough (4 spaces needed).
* Add black line before code blocks and lists where missing (needed).
* Enclose special markdown characters `_*^<>` in backticks to prevent them
from messing up formatting.
* Lists with `1)` changed to `1.` for proper markdown lists.
* Remove excessive indentation which causes text to be unintentionally
rendered as code blocks.
* Other minor formatting fixes.
Other fixes in module.c:
* Remove blank lines between doc comment and function definition. A blank
line here makes the Ruby script exclude the function in docs.
* Change zunionInterDiffGenericCommand to use lookupKeyRead if dstkey is null
* Change zrangeGenericCommand to use lookupKey Write if dstkey isn't null
ZRANGESTORE and UNION, ZINTER, ZDIFF are all new commands (6.2 RC1 and RC2).
In redis 6.0 the ZRANGE was using lookupKeyRead, and ZUNIONSTORE / ZINTERSTORE were using lookupKeyWrite.
So there bugs are introduced in 6.2 and will be resolved before it is released.
the implications of this bug are also not big:
The sole difference between LookupKeyRead and LookupKeyWrite is for command executed on a replica, which are not received from its master client. (for the master, and for the master client on the replica, these two functions behave the same)!
This fixes three issues:
1. Using debug SLEEP was impacting the subsequent test, and causing it to pass reliably even though it should have failed. There was exactly 5 seconds of artificial pause (after 1000, wait 3000, wait 1000) between the debug sleep 5 and when we needed to unblock the client in the subsequent test. Now the test properly makes sure the client is unblocked, and the subsequent test is fixed.
2. Minor, the client pause types were using & comparisons instead of ==, since it was previously a flag.
3. Test is faster now that some of the hand wavy time is removed.
When the server state changes and blocked clients are being dropped, the
paused clients should not be dropped, they're safe to keep since unlike
other blocked types, these commands are not half way though processing,
and the commands they sent may get rejected according to the new server
state.
- the last COW report wasn't always read from the pipe
(receiveLastChildInfo wasn't used)
- but in fact, there's no reason we won't always try to drain that pipe
so i'm unifying receiveLastChildInfo with receiveChildInfo
- adjust threshold of the COW test when run in accurate mode
- add some prints in case this test fails again
- fix indentation, page size, and PID! in MacOS proc info
p.s. it seems that pri_pages_dirtied is always 0
This PR adds another trimming strategy to XADD and XTRIM named MINID
(complements the existing MAXLEN).
It also adds a new LIMIT argument that allows incremental trimming by repeated
calls (rather than all at once).
This provides the ability to trim all records older than a certain ID (which makes it
possible for the user to trim by age too).
Example:
XTRIM mystream MINID ~ 1608540753 will trim entries with id < 1608540753,
but might not trim all (because of the ~ modifier)
The purpose is to ease the use of streams. many users use streams as logs and
the common case is wanting a log
of the last X seconds rather than a log that contains maximum X entries (new
MINID vs existing MAXLEN)
The new LIMIT modifier is only supported when the trim strategy uses ~.
i.e. when the user asked for exact trimming, it all happens in one go (no
possibility for incremental trimming).
However, when ~ is provided, we trim full rax nodes, up to the limit number
of records.
The default limit is 100*stream_node_max_entries (used when LIMIT is not
provided).
I.e. this is a behavior change (even if the existing MAXLEN strategy is used).
An explicit limit of 0 means unlimited (but note that it's not the default).
Other changes:
Refactor arg parsing code for XADD and XTRIM to use common code.
Older arm64 Linux kernels have a bug that could lead to data corruption during
background save under the following scenario:
1) jemalloc uses MADV_FREE on a page,
2) jemalloc reuses and writes the page,
3) Redis forks the background save process, and
4) Linux performs page reclamation.
Under these conditions, Linux will reclaim the page wrongfully and the
background save process will read zeros when it tries to read the page.
The bug has been fixed in Linux with commit:
ff1712f953e27f0b0718762ec17d0adb15c9fd0b ("arm64: pgtable: Ensure dirty bit is
preserved across pte_wrprotect()")
This Commit adds an ignore-warnings config, when not found, redis will
print a warning and exit on startup (default behavior).
Co-authored-by: Oran Agra <oran@redislabs.com>
Add INFO field, rdb_active_cow_size, to report COW of a live fork child while
it's active.
- once in 1024 keys check the time, and if there's more than one second since
the last report send a report to the parent via the pipe.
- refactor the child_info_data struct, it's an implementation detail that
shouldn't be in the server struct, and not used to communicate data between
caller and callee
- remove the magic value from that struct (not sure what it was good for), and
instead add handling of short reads.
- add another value to the structure, cow_type, to indicate if the report is
for the new rdb_active_cow_size field, or it's the last report of a
successful operation
- add new Module API to report the active COW
- add more asserts variants to test.tcl
This is a refactory commit, isn't suppose to have any actual impact.
it does the following:
- keep just one server struct fork child pid variable instead of 3
- have one server struct variable indicating the purpose of the current fork
child.
- redisFork is now responsible of updating the server struct with the pid,
which means it can be the one that calls updateDictResizePolicy
- move child info pipe handling into redisFork instead of having them
repeated outside
- there are two classes of fork purposes, mutually exclusive group (AOF, RDB,
Module), and one that can create several forks to coexist in parallel (LDB,
but maybe Modules some day too, Module API allows for that).
- minor fix to killRDBChild:
unlike killAppendOnlyChild and TerminateModuleForkChild, the killRDBChild
doesn't clear the pid variable or call wait4, so checkChildrenDone does
the cleanup for it.
This commit removes the explicit calls to rdbRemoveTempFile, closeChildInfoPipe,
updateDictResizePolicy, which didn't do any harm, but where unnecessary.
Add ZRANGESTORE command, and improve ZSTORE command to deprecated Z[REV]RANGE[BYSCORE|BYLEX].
Syntax for the new ZRANGESTORE command:
ZRANGESTORE [BYSCORE | BYLEX] [REV] [LIMIT offset count]
New syntax for ZRANGE:
ZRANGE [BYSCORE | BYLEX] [REV] [WITHSCORES] [LIMIT offset count]
Old syntax for ZRANGE:
ZRANGE [WITHSCORES]
Other ZRANGE commands remain unchanged.
The implementation uses common code for all of these, by utilizing a consumer interface that in one
command response to the client, and in the other command stores a zset key.
Co-authored-by: Oran Agra <oran@redislabs.com>
New command: XAUTOCLAIM <key> <group> <consumer> <min-idle-time> <start> [COUNT <count>] [JUSTID]
The purpose is to claim entries from a stale consumer without the usual
XPENDING+XCLAIM combo which takes two round trips.
The syntax for XAUTOCLAIM is similar to scan: A cursor is returned (streamID)
by each call and should be used as start for the next call. 0-0 means the scan is complete.
This PR extends the deferred reply mechanism for any bulk string (not just counts)
This PR carries some unrelated test code changes:
- Renames the term "client" into "consumer" in the stream-cgroups test
- And also changes DEBUG SLEEP into "after"
Co-authored-by: Oran Agra <oran@redislabs.com>
instead of asking for the extra new space it wanted, it asked to grow the
string by the size it already has too.
i.e. a string of 1000 bytes, needing to grow by 10 bytes, would have been
asking for an **additional** 1010 bytes.
Turns out the RDB checksum in Redis 6.0 on bigendian is broken.
It always returned 0, so the RDB files are generated as if checksum is
disabled, and will be loaded ok on littleendian, and on bigendian.
But it'll not be able to load RDB files generated on littleendian or older versions.
Similarly DUMP and RESTORE will work on the same version (0==0),
but will be unable to exchange dump payloads with littleendian or old versions.
When a Lua script returns a map to redis (a feature which was added in
redis 6 together with RESP3), it would have returned the value first and
the key second.
If the client was using RESP2, it was getting them out of order, and if
the client was in RESP3, it was getting a map of value => key.
This was happening regardless of the Lua script using redis.setresp(3)
or not.
This also affects a case where the script was returning a map which it got
from from redis by doing something like: redis.setresp(3); return redis.call()
This fix is a breaking change for redis 6.0 users who happened to rely
on the wrong order (either ones that used redis.setresp(3), or ones that
returned a map explicitly).
This commit also includes other two changes in the tests:
1. The test suite now handles RESP3 maps as dicts rather than nested
lists
2. Remove some redundant (duplicate) tests from tracking.tcl
* man-like consistent long formatting
* Uppercases commands, subcommands and options
* Adds 'HELP' to HELP for all
* Lexicographical order
* Uses value notation and other .md likeness
* Moves const char *help to top
* Keeps it under 80 chars
* Misc help typos, consistent conjuctioning (i.e return and not returns)
* Uses addReplySubcommandSyntaxError(c) all over
Signed-off-by: Itamar Haber <itamar@redislabs.com>
This PR not only fixes the problem that swapdb does not make the
transaction fail, but also optimizes the FLUSHALL and FLUSHDB command to
set the CLIENT_DIRTY_CAS flag to avoid unnecessary traversal of clients.
FLUSHDB was changed to first iterate on all watched keys, and then on the
clients watching each key.
Instead of iterating though all clients, and for each iterate on watched keys.
Co-authored-by: Oran Agra <oran@redislabs.com>
If AOF file contains a long Lua script that timed out, then the `evalCommand` calls
`blockingOperationEnds` which sets `server.blocked_last_cron` to 0. later on,
the AOF `whileBlockedCron` function asserts that this value is not 0.
The fix allows nesting call to `blockingOperationStarts` and `blockingOperationEnds`.
The issue was first introduce in this commit: 9ef8d2f67 (Redis 6.2 RC1)
This is a recent problem, introduced by 7471743 (redis 6.0)
The implications are:
The sole difference between LookupKeyRead and LookupKeyWrite is for command
executed on a replica, which are not received from its master client. (for the master,
and for the master client on the replica, these two functions behave the same)!
Since SORT is a write command, this bug only implicates a writable-replica.
And these are its implications:
- SORT STORE will behave as it did before the above mentioned commit (like before
redis 6.0). on a writable-replica an already logically expired the key would have
appeared missing. (store dest key would be deleted, instead of being populated
with the data from the already logically expired key)
- SORT (the non store variant, which in theory could have been executed on
read-only-replica if it weren't for the write flag), will (in redis 6.0) have a new bug
and return the data from the already logically expired key instead of empty response.
New command flags similar to what SADD already has.
Co-authored-by: huangwei03 <huangwei03@kuaishou.com>
Co-authored-by: Itamar Haber <itamar@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
In #7726 (part of 6.2), we added a mechanism for whileBlockedCron, this
mechanism has an assertion to make sure the timestamp in
whileBlockedCron was always set correctly before the blocking operation
starts.
I now found (thanks to our CI) two bugs in that area:
1) CONFIG RESETSTAT (if it was allowed during loading) would have
cleared this var
2) the call stopLoading (which calls whileBlockedCron) was made too
early, while the rio is still in use, in which case the update_cksum
(rdbLoadProgressCallback) may still be called and whileBlockedCron
can assert.
getRDB is "designed" to work in two modes: one for redis-cli --rdb and
one for redis-cli --cluster backup.
in the later case it uses the hiredis connection from the cluster nodes
and it used to free it without nullifying the context, so a later
attempt to free the context would crash.
I suppose the reason it seems to want to free the hiredis context ASAP
is that it wants to disconnect the replica link, so that replication
buffers will not be accumulated.
The crash log attempts to print the current client info, and when it
does that it attempts to check if the first argument happens to be a key
but it did so for commands with no arguments too, which caused the crash
log to crash half way and not reach its end.
This Commit pushes forward the observability on overall error statistics and command statistics within redis-server:
It extends INFO COMMANDSTATS to have
- failed_calls in - so we can keep track of errors that happen from the command itself, broken by command.
- rejected_calls - so we can keep track of errors that were triggered outside the commmand processing per se
Adds a new section to INFO, named ERRORSTATS that enables keeping track of the different errors that
occur within redis ( within processCommand and call ) based on the reply Error Prefix ( The first word
after the "-", up to the first space ).
This commit also fixes RM_ReplyWithError so that it can be correctly identified as an error reply.
Recently efaf09ee4 started using addReplyErrorSds in place of
addReplySds the later takes ownership of the string but the former did
not.
This introduced memory leaks when a script returns an error to redis,
and also in clusterRedirectClient (two new usages of
addReplyErrorSds which was mostly unused till now.
This commit chagnes two thanks.
1. change addReplyErrorSds to take ownership of the error string.
2. scripting.c doesn't actually need to use addReplyErrorSds, it's a
perfect match for addReplyErrorFormat (replaces newlines with spaces)
Adds: `L/RPOP <key> [count]`
Implements no. 2 of the following strategies:
1. Loop on listTypePop - this would result in multiple calls for memory freeing and allocating (see 769167a079)
2. Iterate the range to build the reply, then call quickListDelRange - this requires two iterations and **is the current choice**
3. Refactor quicklist to have a pop variant of quickListDelRange - probably optimal but more complex
Also:
* There's a historical check for NULL after calling listTypePop that was converted to an assert.
* This refactors common logic shared between LRANGE and the new form of LPOP/RPOP into addListRangeReply (adds test for b/w compat)
* Consequently, it may have made sense to have `LRANGE l -1 -2` and `LRANGE l 9 0` be legit and return a reverse reply. Due to historical reasons that would be, however, a breaking change.
* Added minimal comments to existing commands to adhere to the style, make core dev life easier and get commit karma, naturally.
The commit deals with the syncWithMaster and the ugly state machine in it.
It attempts to clean it a bit, but more importantly it uses pipeline for
part of the work (rather than 7 round trips, we now have 4).
i.e. the connect and PING are separate, then AUTH + 3 REPLCONF in one pipeline,
and finally the PSYNC (must be separate since the master has to have an empty
output buffer).
This is just a refactoring commit.
This function was never actually used as a synchronous (do both send or
receive), it was always used only ine one of the two modes, which meant it
has to take extra arguments that are not relevant for the other.
Besides that, a tool that sends a synchronous command, it not something
we want in our toolbox (synchronous IO in single threaded app is evil).
sendSynchronousCommand was now refactored into separate sending and
receiving APIs, and the sending part has two variants, one taking vaargs,
and the other taking argc+argv (and an optional length array which means
you can use binary sds strings).
As discussed in https://github.com/antirez/redis/issues/7364, it is good
to have a HELLO command variant, which does not switch the current proto
version of a redis server.
While `HELLO` will work, it introduced a certain difficulty on parsing
options of the command. We will need to offset the index of authentication
and setname option by -1.
So 0 is marked a special version meaning non-switching. And we do not
need to change the code much.
