This was harmless because we marked the parent command
with SENTINEL flag. So the populateCommandTable was ok.
And we also don't show the flag (SENTINEL and ONLY-SENTNEL)
in COMMAND INFO.
In this PR, we also add the same CMD_SENTINEL and CMD_ONLY_SENTINEL
flags check when populating the sub-commands.
so that in the future it'll be possible to add some sub-commands to sentinel or sentinel-only but not others.
There is a timing issue reported in test-sanitizer-address (gcc):
```
Sentinels (re)connection following SENTINEL SET mymaster auth-pass:
FAILED: Expected to be disconnected from master due to wrong password
```
The reason we reach it, is because the test is fast enough to modify
auth-pass and test sentinel connection status with the server,
before its scheduled operation got the chance to update connection
status with the server.
We need to wait for `sentinelTimer` to kick in, and then update the
connection status. Replace condition with wait_for_condition on the check.
Fix just like #10480 did
Sentinel once in a while experience Sentinel TILT period or leader election
failure cycle. The problem is that those default timeout are too big and once
it happens, it breaks our tests. Suggesting:
- Reducing failover-timeout from 20 to 10sec (actually it is multiplied by 2
and reach 40sec of timeout)
- Modify tilt-period from default of 30sec to 5sec. When TILT period happens
it might lead to failover in our tests, and might cause also to failover cycle
cycle failure.
Sentinel tests should `wait_for_condition` up to 50seconds, where needed,
to be stable in case having single TILT period or failover failure cycle.
In addition relax timing configuration for "manual failover" Sentinel test
(was modified several months ago as part of an effort to reduce tests runtime)
A timing issue of debug sleep master isn't long enough to ensure
that master is down and let the test identify it. Replaced the code
with suspend PID until verified master-is-down.
Replace condition with wait_for_condition On "Verify sentinel that restarted
failed to reconnect master after ACL change"
The reason we reach it, is because the test is fast enough to modify ACL and
test sentinel connection status with the server - before its scheduled operation
got the chance to update connection status with the server:
```
/* Perform scheduled operations for the specified Redis instance. */
void sentinelHandleRedisInstance(sentinelRedisInstance *ri) {
/* ========== MONITORING HALF ============ */
/* Every kind of instance */
sentinelReconnectInstance(ri);
```
We need to wait for `sentinelTimer` to kick in, and then trigger the reconnect.
As for another change, we should better call `server_set_password` before calling SENTINEL SET auth-pass.
Fixes problem introeuced in #10400
When updating SENTINEL with master’s new password (command:
`SENTINEL SET mymaster auth-pass some-new-password`),
sentinel might still keep the old connection and avoid reconnecting
with the new password. This is because of wrong logic that traces
the last ping (pong) time to servers. In fact it worked fine until 8631e64
changed the condition to send ping. To resolve it with minimal risk,
let’s disconnect master and replicas once changing password/user.
Based on earlier work of yz1509.
This is an enhancement for INFO command, previously INFO only support one argument
for different info section , if user want to get more categories information, either perform
INFO all / default or calling INFO for multiple times.
**Description of the feature**
The goal of adding this feature is to let the user retrieve multiple categories via the INFO
command, and still avoid emitting the same section twice.
A use case for this is like Redis Sentinel, which periodically calling INFO command to refresh
info from monitored Master/Slaves, only Server and Replication part categories are used for
parsing information. If the INFO command can return just enough categories that client side
needs, it can save a lot of time for client side parsing it as well as network bandwidth.
**Implementation**
To share code between redis, sentinel, and other users of INFO (DEBUG and modules),
we have a new `genInfoSectionDict` function that returns a dict and some boolean flags
(e.g. `all`) to the caller (built from user input).
Sentinel is later purging unwanted sections from that, and then it is forwarded to the info `genRedisInfoString`.
**Usage Examples**
INFO Server Replication
INFO CPU Memory
INFO default commandstats
Co-authored-by: Oran Agra <oran@redislabs.com>
Change the sentinel config file to a directory in SENTINEL SET test.
So it will now fail on the `rename` in `rewriteConfigOverwriteFile`.
The test used to set the sentinel config file permissions to `000` to
simulate failure. But it fails on centos7 / freebsd / alpine. (introduced in #10151)
Other changes:
1. More error messages after the config rewrite failure.
2. Modify arg name `force_all` in `rewriteConfig` to `force_write`. (was rename in #9304)
3. Fix a typo in debug quicklist-packed-threshold, then -> than. (#9357)
When performing `SENTINEL SET`, Sentinel updates the local configuration file. Before this commit, failure to update the file would still result with an `+OK` reply. Now, a `-ERR Failed to save config file` error will be returned.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
A test failure was reported in Daily CI (test-centos7-tls).
`CKQUORUM detects failover authorization cannot be reached`.
```
CKQUORUM detects failover authorization cannot be reached: FAILED:
Expected 'invalid command name "OK 4 usable Sentinels. Quorum and failover authorization can be reached"' to match '*NOQUORUM*'
```
It seems that current sentinel does not confirm that the other
sentinels are actually `down`, and then check the quorum.
It at least take 3 seconds on my machine, and we can see there
will be a timing issue with the hard code `after 5000`.
In this commit, we check the response of `SENTINEL SENTINELS mymaster`
to ensure that other sentinels are actually `down` in the view the
current sentinel. Solve the timing issue due to sentinel monitor mechanism.
Summary of changes:
1. Rename `redisCommand->name` to `redisCommand->declared_name`, it is a
const char * for native commands and SDS for module commands.
2. Store the [sub]command fullname in `redisCommand->fullname` (sds).
3. List subcommands in `ACL CAT`
4. List subcommands in `COMMAND LIST`
5. `moduleUnregisterCommands` now will also free the module subcommands.
6. RM_GetCurrentCommandName returns full command name
Other changes:
1. Add `addReplyErrorArity` and `addReplyErrorExpireTime`
2. Remove `getFullCommandName` function that now is useless.
3. Some cleanups about `fullname` since now it is SDS.
4. Delete `populateSingleCommand` function from server.h that is useless.
5. Added tests to cover this change.
6. Add some module unload tests and fix the leaks
7. Make error messages uniform, make sure they always contain the full command
name and that it's quoted.
7. Fixes some typos
see the history in #9504, fixes#10124
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: guybe7 <guy.benoish@redislabs.com>
Recent PRs have introduced some failures, this commit
try to fix these CI failures. Here are the changes:
1. Enable debug-command in sentinel test.
```
Master reboot in very short time: ERR DEBUG command not allowed. If the
enable-debug-command option is set to "local", you can run it from a
local connection, otherwise you need to set this option in the
configuration file, and then restart the server.
```
2. Enable protected-config in sentinel test.
```
SDOWN is triggered by misconfigured instance replying with errors: ERR
CONFIG SET failed (possibly related to argument 'dir') - can't set
protected config
```
3. Enable debug-command in cluster test.
```
Verify slaves consistency: ERR DEBUG command not allowed. If the
enable-debug-command option is set to "local", you can run it from a
local connection, otherwise you need to set this option in the
configuration file, and then restart the server.
```
4. quicklist fill should be signed int.
The reason for the modification is to eliminate the warning.
Modify `int fill: QL_FILL_BITS` to `signed int fill: QL_FILL_BITS`
The first three were introduced at #9920 (same issue).
And the last one was introduced at #9962.
Add master-reboot-down-after-period as a configurable parameter, to make it possible to trigger a failover from a master that is responding with `-LOADING` for a long time after being restarted.
This makes it possible to tune many parameters that were previously hard coded.
We don't intend these to be user configurable, but only used by tests to accelerate certain conditions which would otherwise take a long time and slow down the test suite.
Co-authored-by: Lucas Guang Yang <l84193800@china.huawei.com>
The issue is that when a sentinel with the same address and IP is turned on with a different runid, its port is set to 0 but it is still present in the dictionary master->sentinels which contain all the sentinels for a master.
This causes a problem when we do INFO SENTINEL because it takes the size of the dictionary of sentinels. This might also cause a problem for failover if enough sentinels have their port set to 0 since the number of voters in failover is also determined by the size of the dictionary of sentinels.
This commits removes the sentinels with the port set to zero from the dictionary of sentinels.
Fixes#8786
This PR adds a spell checker CI action that will fail future PRs if they introduce typos and spelling mistakes.
This spell checker is based on blacklist of common spelling mistakes, so it will not catch everything,
but at least it is also unlikely to cause false positives.
Besides that, the PR also fixes many spelling mistakes and types, not all are a result of the spell checker we use.
Here's a summary of other changes:
1. Scanned the entire source code and fixes all sorts of typos and spelling mistakes (including missing or extra spaces).
2. Outdated function / variable / argument names in comments
3. Fix outdated keyspace masks error log when we check `config.notify-keyspace-events` in loadServerConfigFromString.
4. Trim the white space at the end of line in `module.c`. Check: https://github.com/redis/redis/pull/7751
5. Some outdated https link URLs.
6. Fix some outdated comment. Such as:
- In README: about the rdb, we used to said create a `thread`, change to `process`
- dbRandomKey function coment (about the dictGetRandomKey, change to dictGetFairRandomKey)
- notifyKeyspaceEvent fucntion comment (add type arg)
- Some others minor fix in comment (Most of them are incorrectly quoted by variable names)
7. Modified the error log so that users can easily distinguish between TCP and TLS in `changeBindAddr`
5629dbe71 added a change that configures the tcp (plaintext) port
alongside the tls port, this causes the INFO command for tcp_port
to return that instead of the tls port when running in tls, and that broke
the sentinel tests that query it.
the fix is to add a method that gets the right port from CONFIG instead
of relying on the tcp_port info field.
The 'sentinel replicas <master>' command will ignore replicas with
`replica-announced` set to no.
The goal of disabling the config setting replica-announced is to allow ghost
replicas. The replica is in the cluster, synchronize with its master, can be
promoted to master and is not exposed to sentinel clients. This way, it is
acting as a live backup or living ghost.
In addition, to prevent the replica to be promoted as master, set
replica-priority to 0.
* Don't run test script on non-Linux.
* Verify that reported fds do indeed exist also in parent, to avoid
false negatives on some systems (namely CentOS).
Co-authored-by: Andy Pan <panjf2000@gmail.com>
* For consistency, use tclsh for the script as well
* Ignore leaked fds that originate from grandparent process, since we
only care about fds redis-sentinel itself is responsible for
* Check every test iteration to catch problems early
* Some cleanups, e.g. parameterization of file name, etc.
This commit fixes sentinel announces hostnames test error in certain linux environment
Before this commit, we only check localhost is resolved into 127.0.0.1, however in ubuntu
or some other linux environments "localhost" will be resolved into ::1 ipv6 address first if
the network stack is capable.
This is both a bugfix and an enhancement.
Internally, Sentinel relies entirely on IP addresses to identify
instances. When configured with a new master, it also requires users to
specify and IP and not hostname.
However, replicas may use the replica-announce-ip configuration to
announce a hostname. When that happens, Sentinel fails to match the
announced hostname with the expected IP and considers that a different
instance, triggering reconfiguration, etc.
Another use case is where TLS is used and clients are expected to match
the hostname to connect to with the certificate's SAN attribute. To
properly implement this configuration, it is necessary for Sentinel to
redirect clients to a hostname rather than an IP address.
The new 'resolve-hostnames' configuration parameter determines if
Sentinel is willing to accept hostnames. It is set by default to no,
which maintains backwards compatibility and avoids unexpected DNS
resolution delays on systems with DNS configuration issues.
Internally, Sentinel continues to identify instances by their resolved
IP address and will also report the IP by default. The new
'announce-hostnames' parameter determines if Sentinel should prefer to
announce a hostname, when available, rather than an IP address. This
applies to addresses returned to clients, as well as their
representation in the configuration file, REPLICAOF configuration
commands, etc.
This commit also introduces SENTINEL CONFIG GET and SENTINEL CONFIG SET
which can be used to introspect or configure global Sentinel
configuration that was previously was only possible by directly
accessing the configuration file and possibly restarting the instance.
Co-authored-by: myl1024 <myl92916@qq.com>
Co-authored-by: sundb <sundbcn@gmail.com>
This commit fixes a well known and an annoying issue in Sentinel mode.
Cause of this issue:
Currently, Redis rewrite process works well in server mode, however in sentinel mode,
the sentinel config has variant semantics for different configurations, in example configuration
https://github.com/redis/redis/blob/unstable/sentinel.conf, we put comments on these.
However the rewrite process only treat the sentinel config as a single option. During rewrite
process, it will mess up with the lines and comments.
Approaches:
In order to solve this issue, we need to differentiate different subconfig options in sentinel separately,
for example, sentinel monitor <master-name> <ip> <redis-port> <quorum>
we can treat it as sentinel monitor option, instead of the sentinel option.
This commit also fixes the dependency issue when putting configurations in sentinel.conf.
For example before this commit,we must put
`sentinel monitor <master-name> <ip> <redis-port> <quorum>` before
`sentinel auth-pass <master-name> <password>` for a single master,
otherwise the server cannot start and will return error. This commit fixes this issue, as long as
the monitoring master was configured, no matter the sequence is, the sentinel can start and run properly.
Sentinel uses execve to run scripts, so it needs to use FD_CLOEXEC
on all file descriptors, so that they're not accessible by the script it runs.
This commit includes a change to the sentinel tests, which verifies no
FDs are left opened when the script is executed.
* Introduce a connection abstraction layer for all socket operations and
integrate it across the code base.
* Provide an optional TLS connections implementation based on OpenSSL.
* Pull a newer version of hiredis with TLS support.
* Tests, redis-cli updates for TLS support.
During the initial handshake with the master a slave will report to have
a very high disconnection time from its master (since technically it was
disconnected since forever, so the current UNIX time in seconds is
reported).
However when the slave is connected again the Sentinel may re-scan the
INFO output again only after 10 seconds, which is a long time. During
this time Sentinels will consider this instance unable to failover, so
a useless delay is introduced.
Actaully this hardly happened in the practice because when a slave's
master is down, the INFO period for slaves changes to 1 second. However
when a manual failover is attempted immediately after adding slaves
(like in the case of the Sentinel unit test), this problem may happen.
This commit changes the INFO period to 1 second even in the case the
slave's master is not down, but the slave reported to be disconnected
from the master (by publishing, last time we checked, a master
disconnection time field in INFO).
This change is required as a result of an unrelated change in the
replication code that adds a small delay in the master-slave first
synchronization.
In the initialization test for each instance we used to unregister the
old master and register it again to clear the config.
However there is a race condition doing this: as soon as we unregister
and re-register "mymaster", another Sentinel can update the new
configuration with the old state because of gossip "hello" messages.
So the correct procedure is instead, unregister "mymaster" from all the
sentinel instances, and re-register it everywhere again.
