when tracking the peak, don't reset the peak to 0, reset it to the
maximum of the current used, and the planned to be used by the current
arg.
when shrining, split the two separate conditions.
the idle time shrinking will remove all free space.
but the peak based shrinking will keep room for the current arg.
when we resize due to a peak (rahter than idle time), don't trim all
unused space, let the qbuf keep a size that's sufficient for the
currently process bulklen, and the current peak.
Co-authored-by: sundb <sundbcn@gmail.com>
Co-authored-by: yoav-steinberg <yoav@monfort.co.il>
1. querybuf_peak has not been updated correctly in readQueryFromClient.
2. qbuf shrinking uses sdsalloc instead of sdsAllocSize
see more details in issue #4983
Before this commit, redis-server starts in sentinel mode if the first startup
argument has the string redis-sentinel, so redis also starts in sentinel mode
if the directory it was started from contains the string redis-sentinel.
Now we check the executable name instead of directory.
Some examples:
1. Execute ./redis-sentinel/redis/src/redis-sentinel, starts in sentinel mode.
2. Execute ./redis-sentinel/redis/src/redis-server, starts in server mode,
but before, redis will start in sentinel mode.
3. Execute ./redis-sentinel/redis/src/redis-server --sentinel, of course, like
before, starts in sentinel mode.
In the past, the first bind address that was explicitly specified was
also used to bind outgoing connections. This could result with some
problems. For example: on some systems using `bind 127.0.0.1` would
result with outgoing connections also binding to `127.0.0.1` and failing
to connect to remote addresses.
With the recent change to the way `bind` is handled, this presented
other issues:
* The default first bind address is '*' which is not a valid address.
* We make no distinction between user-supplied config that is identical
to the default, and the default config.
This commit addresses both these issues by introducing an explicit
configuration parameter to control the bind address on outgoing
connections.
* Specifying an empty `bind ""` configuration prevents Redis from listening on any TCP port. Before this commit, such configuration was not accepted.
* Using `CONFIG GET bind` will always return an explicit configuration value. Before this commit, if a bind address was not specified the returned value was empty (which was an anomaly).
Another behavior change is that modifying the `bind` configuration to a non-default value will NO LONGER DISABLE protected-mode implicitly.
* Cleaning up the cluster interface by moving almost all related declarations into cluster.h
(no logic change -- just moving declarations/definitions around)
This initial effort leaves two items out of scope - the configuration parsing into the server
struct and the internals exposed by the clusterNode struct.
* Remove unneeded declarations of dictSds*
Ideally all the dictSds functionality would move from server.c into a dedicated module
so we can avoid the duplication in redis-benchmark/cli
* Move crc16 back into server.h, will be moved out once we create a seperate header file for
hashing functions
The initialize memory of `querybuf` is `PROTO_IOBUF_LEN(1024*16) * 2` (due to sdsMakeRoomFor being greedy), under `jemalloc`, the allocated memory will be 40k.
This will most likely result in the `querybuf` being resized when call `clientsCronResizeQueryBuffer` unless the client requests it fast enough.
Note that this bug existed even before #7875, since the condition for resizing includes the sds headers (32k+6).
## Changes
1. Use non-greedy sdsMakeRoomFor when allocating the initial query buffer (of 16k).
1. Also use non-greedy allocation when working with BIG_ARG (we won't use that extra space anyway)
2. in case we did use a greedy allocation, read as much as we can into the buffer we got (including internal frag), to reduce system calls.
3. introduce a dedicated constant for the shrinking (same value as before)
3. Add test for querybuf.
4. improve a maxmemory test by ignoring the effect of replica query buffers (can accumulate many ACKs on slow env)
5. improve a maxmemory by disabling slowlog (it will cause slight memory growth on slow env).
Today when we load the AOF on startup, the loadAppendOnlyFile checks if
the file is openning for reading.
This check is redundent (dead code) as we open the AOF file for writing at initServer,
and the file will always be existing for the loadAppendOnlyFile.
In this commit:
- remove all the exit(1) from loadAppendOnlyFile, as it is the caller
responsibility to decide what to do in case of failure.
- move the opening of the AOF file for writing, to be after we loading it.
- avoid return -ERR in DEBUG LOADAOF, when the AOF is existing but empty
This PR adds a spell checker CI action that will fail future PRs if they introduce typos and spelling mistakes.
This spell checker is based on blacklist of common spelling mistakes, so it will not catch everything,
but at least it is also unlikely to cause false positives.
Besides that, the PR also fixes many spelling mistakes and types, not all are a result of the spell checker we use.
Here's a summary of other changes:
1. Scanned the entire source code and fixes all sorts of typos and spelling mistakes (including missing or extra spaces).
2. Outdated function / variable / argument names in comments
3. Fix outdated keyspace masks error log when we check `config.notify-keyspace-events` in loadServerConfigFromString.
4. Trim the white space at the end of line in `module.c`. Check: https://github.com/redis/redis/pull/7751
5. Some outdated https link URLs.
6. Fix some outdated comment. Such as:
- In README: about the rdb, we used to said create a `thread`, change to `process`
- dbRandomKey function coment (about the dictGetRandomKey, change to dictGetFairRandomKey)
- notifyKeyspaceEvent fucntion comment (add type arg)
- Some others minor fix in comment (Most of them are incorrectly quoted by variable names)
7. Modified the error log so that users can easily distinguish between TCP and TLS in `changeBindAddr`
Till now, on replica full-sync we used to transfer absolute time for TTL,
however when a command arrived (EXPIRE or EXPIREAT),
we used to propagate it as is to replicas (possibly with relative time),
but always translate it to EXPIREAT (absolute time) to AOF.
This commit changes that and will always use absolute time for propagation.
see discussion in #8433
Furthermore, we Introduce new commands: `EXPIRETIME/PEXPIRETIME`
that allow extracting the absolute TTL time from a key.
When client breached the output buffer soft limit but then went idle,
we didn't disconnect on soft limit timeout, now we do.
Note this also resolves some sporadic test failures in due to Linux
buffering data which caused tests to fail if during the test we went
back under the soft COB limit.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: sundb <sundbcn@gmail.com>
This solves an issue reported in #8712 in which a replica would bypass
the client write pause check and cause an assertion due to executing a
write command during failover.
The fact is that we don't expect replicas to execute any command other
than maybe REPLCONF and PING, etc. but matching against the ADMIN
command flag is insufficient, so instead i just block keyspace access
for now.
When replica never successfully connect to master, server.repl_down_since
will be initialized to 0, therefore, the info master_link_down_since_seconds
was showing the current unix timestamp, which does not make much sense.
This commit fixes the issue by showing master_link_down_since_seconds to -1.
means the replica never connect to master before.
This commit also resets this variable back to 0 when a replica is turned into
a master, so that it'll behave the same if the master is later turned into a
replica again.
The implication of this change is that if some app is checking if the value is > 60
do something, like conclude the replica is stale, this could case harm (changing
a big positive number with a small one).
The bio aof fsync fd may be closed by main thread (AOFRW done handler)
and even possibly reused for another socket, pipe, or file.
This can can an EBADF or EINVAL fsync error, which will lead to -MISCONF errors failing all writes.
We just ignore these errno because aof fsync did not really fail.
We handle errno when fsyncing aof in bio, so we could know the real reason
when users get -MISCONF Errors writing to the AOF file error
Issue created with #8419
In `aof.c`, we call fsync when stop aof, and now print a log to let user know that if fail.
In `cluster.c`, we now return error, the calling function already handles these write errors.
In `redis-cli.c`, users hope to save rdb, we now print a message if fsync failed.
In `rio.c`, we now treat fsync errors like we do for write errors.
In `server.c`, we try to fsync aof file when shutdown redis, we only can print one log if fail.
In `bio.c`, if failing to fsync aof file, we will set `aof_bio_fsync_status` to error , and reject writing just like last writing aof error, moreover also set INFO command field `aof_last_write_status` to error.
The implications of this change is just that in the past when a config file was missing,
in some cases it was exiting before printing the sever startup prints and sometimes after,
and now it'll always exit before printing them.
The 'sentinel replicas <master>' command will ignore replicas with
`replica-announced` set to no.
The goal of disabling the config setting replica-announced is to allow ghost
replicas. The replica is in the cluster, synchronize with its master, can be
promoted to master and is not exposed to sentinel clients. This way, it is
acting as a live backup or living ghost.
In addition, to prevent the replica to be promoted as master, set
replica-priority to 0.
Add publish channel permissions check in processCommand.
processCommand didn't check publish channel permissions, so we can
queue a publish command in a transaction. But when exec the transaction,
it will fail with -NOPERM.
We also union keys/commands/channels permissions check togegher in
ACLCheckAllPerm. Remove pubsubCheckACLPermissionsOrReply in
publishCommand/subscribeCommand/psubscribeCommand. Always
check permissions in processCommand/execCommand/
luaRedisGenericCommand.
* SLOWLOG didn't record anything for blocked commands because the client
was reset and argv was already empty. there was a fix for this issue
specifically for modules, now it works for all blocked clients.
* The original command argv (before being re-written) was also reset
before adding the slowlog on behalf of the blocked command.
* Latency monitor is now updated regardless of the slowlog flags of the
command or its execution (their purpose is to hide sensitive info from
the slowlog, not hide the fact the latency happened).
* Latency monitor now uses real_cmd rather than c->cmd (which may be
different if the command got re-written, e.g. GEOADD)
Changes:
* Unify shared code between slowlog insertion in call() and
updateStatsOnUnblock(), hopefully prevent future bugs from happening
due to the later being overlooked.
* Reset CLIENT_PREVENT_LOGGING in resetClient rather than after command
processing.
* Add a test for SLOWLOG and BLPOP
Notes:
- real_cmd == c->lastcmd, except inside MULTI and Lua.
- blocked commands never happen in these cases (MULTI / Lua)
- real_cmd == c->cmd, except for when the command is rewritten (e.g.
GEOADD)
- blocked commands (currently) are never rewritten
- other than the command's CLIENT_PREVENT_LOGGING, and the
execution flag CLIENT_PREVENT_LOGGING, other cases that we want to
avoid slowlog are on AOF loading (specifically CMD_CALL_SLOWLOG will
be off when executed from execCommand that runs from an AOF)
Reading CoW from /proc/<pid>/smaps can be slow with large processes on
some platforms.
This measures the time it takes to read CoW info and limits the duty
cycle of future updates to roughly 1/100.
As current_cow_size no longer represnets a current, fixed interval value
there is also a new current_cow_size_age field that provides information
about the age of the size value, in seconds.
In certain scenario start_server may think it failed to start a redis server
although it started successfully. in these cases, it'll not terminate it, and
it'll remain running when the test is over.
In start_server if config doesn't have bind (the minimal.conf in introspection.tcl),
it will try to bind ipv4 and ipv6. One may success while other fails. It will
output "Could not create server TCP listening socket".
wait_server_started uses this message to check whether instance started
successfully. So it will consider that it failed even though redis started successfully.
Additionally, in some cases it wasn't clear to users why the server exited,
since the warning message printed to the log, could in some cases be harmless,
and in some cases fatal.
This PR adds makes a clear distinction between a warning log message and
a fatal one, and changes the test suite to look for the fatal message.
listenToPort attempts to gracefully handle and ignore certain errors but does not store errno prior to logging, which in turn calls several libc functions that may overwrite errno.
This has been discovered due to libmusl strftime() always returning with errno set to EINVAL, which resulted with docker-library/redis#273.
1. moduleReplicateMultiIfNeeded should use server.in_eval like
moduleHandlePropagationAfterCommandCallback
2. server.in_eval could have been set to 1 and not reset back
to 0 (a lot of missed early-exits after in_eval is already 1)
Note: The new assertions in processCommand cover (2) and I added
two module tests to cover (1)
Implications:
If an EVAL that failed (and thus left server.in_eval=1) runs before a module
command that replicates, the replication stream will contain MULTI (because
moduleReplicateMultiIfNeeded used to check server.lua_caller which is NULL
at this point) but not EXEC (because server.in_eval==1)
This only affects modules as module.c the only user of server.in_eval.
Affects versions 6.2.0, 6.2.1
On a replica we do accept connections, even though commands accessing
the database will operate in read-only mode. But the server is still
already operational and processing commands.
Not sending the readiness notification means that on a HA setup where
the nodes all start as replicas (with replicaof in the config) with
a replica that cannot connect to the master server and which might not
come back in a predictable amount of time or at all, the service
supervisor will end up timing out the service and terminating it, with
no option to promote it to be the main instance. This seems counter to
what the readiness notification is supposed to be signaling.
Instead send the readiness notification when we start accepting
commands, and then send the various server status changes as that.
Fixes: commit 641c64ada1
Fixes: commit dfb598cf33
Bug 1:
When a module ctx is freed moduleHandlePropagationAfterCommandCallback
is called and handles propagation. We want to prevent it from propagating
commands that were not replicated by the same context. Example:
1. module1.foo does: RM_Replicate(cmd1); RM_Call(cmd2); RM_Replicate(cmd3)
2. RM_Replicate(cmd1) propagates MULTI and adds cmd1 to also_propagagte
3. RM_Call(cmd2) create a new ctx, calls call() and destroys the ctx.
4. moduleHandlePropagationAfterCommandCallback is called, calling
alsoPropagates EXEC (Note: EXEC is still not written to socket),
setting server.in_trnsaction = 0
5. RM_Replicate(cmd3) is called, propagagting yet another MULTI (now
we have nested MULTI calls, which is no good) and then cmd3
We must prevent RM_Call(cmd2) from resetting server.in_transaction.
REDISMODULE_CTX_MULTI_EMITTED was revived for that purpose.
Bug 2:
Fix issues with nested RM_Call where some have '!' and some don't.
Example:
1. module1.foo does RM_Call of module2.bar without replication (i.e. no '!')
2. module2.bar internally calls RM_Call of INCR with '!'
3. at the end of module1.foo we call RM_ReplicateVerbatim
We want the replica/AOF to see only module1.foo and not the INCR from module2.bar
Introduced a global replication_allowed flag inside RM_Call to determine
whether we need to replicate or not (even if '!' was specified)
Other changes:
Split beforePropagateMultiOrExec to beforePropagateMulti afterPropagateExec
just for better readability
`master_sync_perc` and `loading_loaded_perc` don't have that sign,
and i think the info field should be a raw floating point number (the name suggests its units).
we already have `used_memory_peak_perc` and `used_memory_dataset_perc` which do add the `%` sign, but:
1) i think it was a mistake but maybe too late to fix now, and maybe not too late to fix for `current_fork_perc`
2) it is more important to be consistent with the two other "progress" "prec" metrics, and not with the "utilization" metric.
1. Add `redis-server test all` support to run all tests.
2. Add redis test to daily ci.
3. Add `--accurate` option to run slow tests for more iterations (so that
by default we run less cycles (shorter time, and less prints).
4. Move dict benchmark to REDIS_TEST.
5. fix some leaks in tests
6. make quicklist tests run on a specific fill set of options rather than huge ranges
7. move some prints in quicklist test outside their loops to reduce prints
8. removing sds.h from dict.c since it is now used in both redis-server and
redis-cli (uses hiredis sds)
When no connected clients variables stopped being updated instead of being zeroed over time.
The other changes are cleanup and optimization (avoiding an unnecessary division per client)
Add ability to modify port, tls-port and bind configurations by CONFIG SET command.
To simplify the code and make it cleaner, a new structure
added, socketFds, which contains the file descriptors array and its counter,
and used for TCP, TLS and Cluster sockets file descriptors.
Originally this was limited to IPv6 address length, but effectively it
has been used for host names and now that Sentinel accepts that as well
we need to be able to store full hostnames.
Fixes#8507
* Adding current_save_keys_total and current_save_keys_processed info fields.
Present in replication, BGSAVE and AOFRW.
* Changing RM_SendChildCOWInfo() to RM_SendChildHeartbeat(double progress)
* Adding new info field current_fork_perc. Present in Replication, BGSAVE, AOFRW,
and module forks.
This commit enables tracking time of the background tasks and on replies,
opening the door for properly tracking commands that rely on blocking / background
work via the slowlog, latency history, and commandstats.
Some notes:
- The time spent blocked waiting for key changes, or blocked on synchronous
replication is not accounted for.
- **This commit does not affect latency tracking of commands that are non-blocking
or do not have background work.** ( meaning that it all stays the same with exception to
`BZPOPMIN`,`BZPOPMAX`,`BRPOP`,`BLPOP`, etc... and module's commands that rely
on background threads ).
- Specifically for latency history command we've added a new event class named
`command-unblocking` that will enable latency monitoring on commands that spawn
background threads to do the work.
- For blocking commands we're now considering the total time of a command as the
time spent on call() + the time spent on replying when unblocked.
- For Modules commands that rely on background threads we're now considering the
total time of a command as the time spent on call (main thread) + the time spent on
the background thread ( if marked within `RedisModule_MeasureTimeStart()` and
`RedisModule_MeasureTimeEnd()` ) + the time spent on replying (main thread)
To test for this feature we've added a `unit/moduleapi/blockonbackground` test that relies on
a module that blocks the client and sleeps on the background for a given time.
- check blocked command that uses RedisModule_MeasureTimeStart() is tracking background time
- check blocked command that uses RedisModule_MeasureTimeStart() is tracking background time even in timeout
- check blocked command with multiple calls RedisModule_MeasureTimeStart() is tracking the total background time
- check blocked command without calling RedisModule_MeasureTimeStart() is not reporting background time
New commands:
`HRANDFIELD [<count> [WITHVALUES]]`
`ZRANDMEMBER [<count> [WITHSCORES]]`
Algorithms are similar to the one in SRANDMEMBER.
Both return a simple bulk response when no arguments are given, and an array otherwise.
In case values/scores are requested, RESP2 returns a long array, and RESP3 a nested array.
note: in all 3 commands, the only option that also provides random order is the one with negative count.
Changes to SRANDMEMBER
* Optimization when count is 1, we can use the more efficient algorithm of non-unique random
* optimization: work with sds strings rather than robj
Other changes:
* zzlGetScore: when zset needs to convert string to double, we use safer memcpy (in
case the buffer is too small)
* Solve a "bug" in SRANDMEMBER test: it intended to test a positive count (case 3 or
case 4) and by accident used a negative count
Co-authored-by: xinluton <xinluton@qq.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
The key point is how to recover from last AOF write error, for example:
1. start redis with appendonly yes, and append some write commands
2. short write or something else error happen, `server.aof_last_write_status` changed to `C_ERR`, now redis doesn't accept write commands
3. execute `CONFIG SET appendonly no` to avoid the above problem, now redis can accept write commands again
4. disk error resolved, and execute `CONFIG SET appendonly yes` to reopen AOF, but `server.aof_last_write_status` cannot be changed to `C_OK` (if background aof rewrite run less then 1 second, it will free `server.aof_buf` and then serverCron cannot fix `aof_last_write_status`), then redis cannot accept write commands forever.
This PR use a simple way to fix it:
1. just free `server.aof_buf` when stop appendonly to save memory, if error happens in `flushAppendOnlyFile(1)`, the `server.aof_buf` may contains some data which has not be written to aof, I think we can ignore it because we turn off the appendonly.
2. reset fsync status after stop appendonly and call `flushAppendOnlyFile` only when `aof_state` is ON
3. reset `server.last_write_status` when reopen aof to accept write commands
if option `set-proc-title' is no, then do nothing for proc title.
The reason has been explained long ago, see following:
We update redis to 2.8.8, then found there are some side effect when
redis always change the process title.
We run several slave instance on one computer, and all these salves
listen on unix socket only, then ps will show:
1 S redis 18036 1 0 80 0 - 56130 ep_pol 14:02 ? 00:00:31 /usr/sbin/redis-server *:0
1 S redis 23949 1 0 80 0 - 11074 ep_pol 15:41 ? 00:00:00 /usr/sbin/redis-server *:0
for redis 2.6 the output of ps is like following:
1 S redis 18036 1 0 80 0 - 56130 ep_pol 14:02 ? 00:00:31 /usr/sbin/redis-server /etc/redis/a.conf
1 S redis 23949 1 0 80 0 - 11074 ep_pol 15:41 ? 00:00:00 /usr/sbin/redis-server /etc/redis/b.conf
Later is more informational in our case. The situation
is worse when we manage the config and process running
state by salt. Salt check the process by running "ps |
grep SIG" (for Gentoo System) to check the running
state, where SIG is the string to search for when
looking for the service process with ps. Previously, we
define sig as "/usr/sbin/redis-server
/etc/redis/a.conf". Since the ps output is identical for
our case, so we have no way to check the state of
specified redis instance.
So, for our case, we prefer the old behavior, i.e, do
not change the process title for the main redis process.
Or add an option such as "set-proc-title [yes|no]" to
control this behavior.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
At least in one case the arm64 cow kernel bug test triggers an assert, which is a problem because it cannot be ignored like cases where the bug is found.
On older systems (Linux <4.5) madvise fails because MADV_FREE is not supported. We treat these failures as an indication the system is not affected.
Fixes#8351, #8406
This commit introduces two new command and two options for an existing command
GETEX <key> [PERSIST][EX seconds][PX milliseconds] [EXAT seconds-timestamp]
[PXAT milliseconds-timestamp]
The getexCommand() function implements extended options and variants of the GET
command. Unlike GET command this command is not read-only. Only one of the options
can be used at a given time.
1. PERSIST removes any TTL associated with the key.
2. EX Set expiry TTL in seconds.
3. PX Set expiry TTL in milliseconds.
4. EXAT Same like EX instead of specifying the number of seconds representing the
TTL (time to live), it takes an absolute Unix timestamp
5. PXAT Same like PX instead of specifying the number of milliseconds representing the
TTL (time to live), it takes an absolute Unix timestamp
Command would return either the bulk string, error or nil.
GETDEL <key>
Would delete the key after getting.
SET key value [NX] [XX] [KEEPTTL] [GET] [EX <seconds>] [PX <milliseconds>]
[EXAT <seconds-timestamp>][PXAT <milliseconds-timestamp>]
Two new options added here are EXAT and PXAT
Key implementation notes
- `SET` with `PX/EX/EXAT/PXAT` is always translated to `PXAT` in `AOF`. When relative time is
specified (`PX/EX`), replication will always use `PX`.
- `setexCommand` and `psetexCommand` would no longer need translation in `feedAppendOnlyFile`
as they are modified to invoke `setGenericCommand ` with appropriate flags which will take care of
correct AOF translation.
- `GETEX` without any optional argument behaves like `GET`.
- `GETEX` command is never propagated, It is either propagated as `PEXPIRE[AT], or PERSIST`.
- `GETDEL` command is propagated as `DEL`
- Combined the validation for `SET` and `GETEX` arguments.
- Test cases to validate AOF/Replication propagation
This commit fixes a well known and an annoying issue in Sentinel mode.
Cause of this issue:
Currently, Redis rewrite process works well in server mode, however in sentinel mode,
the sentinel config has variant semantics for different configurations, in example configuration
https://github.com/redis/redis/blob/unstable/sentinel.conf, we put comments on these.
However the rewrite process only treat the sentinel config as a single option. During rewrite
process, it will mess up with the lines and comments.
Approaches:
In order to solve this issue, we need to differentiate different subconfig options in sentinel separately,
for example, sentinel monitor <master-name> <ip> <redis-port> <quorum>
we can treat it as sentinel monitor option, instead of the sentinel option.
This commit also fixes the dependency issue when putting configurations in sentinel.conf.
For example before this commit,we must put
`sentinel monitor <master-name> <ip> <redis-port> <quorum>` before
`sentinel auth-pass <master-name> <password>` for a single master,
otherwise the server cannot start and will return error. This commit fixes this issue, as long as
the monitoring master was configured, no matter the sequence is, the sentinel can start and run properly.
Fixes a regression introduced due to a new (safer) way of rewriting configuration files. In the past the file was simply overwritten (same inode), but now Redis creates a new temporary file and later renames it over the old one.
The temp file typically gets created with 0600 permissions so we later fchmod it to fix that. Unlike open with O_CREAT, fchmod doesn't consider umask so we have to do that explicitly.
Fixes#8369
The output for COMMAND command was wrong for some commands.
clients can use firstkey,lastkey,step to find (some) key name arguments, and the
"movablekeys" flag to know that they can't know all (or any) of the key name arguments.
These commands had the wrong output:
1. GEORADIUS*_RO used to have "movablekeys" (which it doesn't really need)
2. XREAD and XREADGROUP used to have (1,1,1). but that's completely wrong.
3. Z*STORE used to have (0,0,0) but it can at lest give the index of the dstkey (1,1,1)
Sentinel uses execve to run scripts, so it needs to use FD_CLOEXEC
on all file descriptors, so that they're not accessible by the script it runs.
This commit includes a change to the sentinel tests, which verifies no
FDs are left opened when the script is executed.
This fixes three issues:
1. Using debug SLEEP was impacting the subsequent test, and causing it to pass reliably even though it should have failed. There was exactly 5 seconds of artificial pause (after 1000, wait 3000, wait 1000) between the debug sleep 5 and when we needed to unblock the client in the subsequent test. Now the test properly makes sure the client is unblocked, and the subsequent test is fixed.
2. Minor, the client pause types were using & comparisons instead of ==, since it was previously a flag.
3. Test is faster now that some of the hand wavy time is removed.
Older arm64 Linux kernels have a bug that could lead to data corruption during
background save under the following scenario:
1) jemalloc uses MADV_FREE on a page,
2) jemalloc reuses and writes the page,
3) Redis forks the background save process, and
4) Linux performs page reclamation.
Under these conditions, Linux will reclaim the page wrongfully and the
background save process will read zeros when it tries to read the page.
The bug has been fixed in Linux with commit:
ff1712f953e27f0b0718762ec17d0adb15c9fd0b ("arm64: pgtable: Ensure dirty bit is
preserved across pte_wrprotect()")
This Commit adds an ignore-warnings config, when not found, redis will
print a warning and exit on startup (default behavior).
Co-authored-by: Oran Agra <oran@redislabs.com>
Add INFO field, rdb_active_cow_size, to report COW of a live fork child while
it's active.
- once in 1024 keys check the time, and if there's more than one second since
the last report send a report to the parent via the pipe.
- refactor the child_info_data struct, it's an implementation detail that
shouldn't be in the server struct, and not used to communicate data between
caller and callee
- remove the magic value from that struct (not sure what it was good for), and
instead add handling of short reads.
- add another value to the structure, cow_type, to indicate if the report is
for the new rdb_active_cow_size field, or it's the last report of a
successful operation
- add new Module API to report the active COW
- add more asserts variants to test.tcl
This is a refactory commit, isn't suppose to have any actual impact.
it does the following:
- keep just one server struct fork child pid variable instead of 3
- have one server struct variable indicating the purpose of the current fork
child.
- redisFork is now responsible of updating the server struct with the pid,
which means it can be the one that calls updateDictResizePolicy
- move child info pipe handling into redisFork instead of having them
repeated outside
- there are two classes of fork purposes, mutually exclusive group (AOF, RDB,
Module), and one that can create several forks to coexist in parallel (LDB,
but maybe Modules some day too, Module API allows for that).
- minor fix to killRDBChild:
unlike killAppendOnlyChild and TerminateModuleForkChild, the killRDBChild
doesn't clear the pid variable or call wait4, so checkChildrenDone does
the cleanup for it.
This commit removes the explicit calls to rdbRemoveTempFile, closeChildInfoPipe,
updateDictResizePolicy, which didn't do any harm, but where unnecessary.
Add ZRANGESTORE command, and improve ZSTORE command to deprecated Z[REV]RANGE[BYSCORE|BYLEX].
Syntax for the new ZRANGESTORE command:
ZRANGESTORE [BYSCORE | BYLEX] [REV] [LIMIT offset count]
New syntax for ZRANGE:
ZRANGE [BYSCORE | BYLEX] [REV] [WITHSCORES] [LIMIT offset count]
Old syntax for ZRANGE:
ZRANGE [WITHSCORES]
Other ZRANGE commands remain unchanged.
The implementation uses common code for all of these, by utilizing a consumer interface that in one
command response to the client, and in the other command stores a zset key.
Co-authored-by: Oran Agra <oran@redislabs.com>
New command: XAUTOCLAIM <key> <group> <consumer> <min-idle-time> <start> [COUNT <count>] [JUSTID]
The purpose is to claim entries from a stale consumer without the usual
XPENDING+XCLAIM combo which takes two round trips.
The syntax for XAUTOCLAIM is similar to scan: A cursor is returned (streamID)
by each call and should be used as start for the next call. 0-0 means the scan is complete.
This PR extends the deferred reply mechanism for any bulk string (not just counts)
This PR carries some unrelated test code changes:
- Renames the term "client" into "consumer" in the stream-cgroups test
- And also changes DEBUG SLEEP into "after"
Co-authored-by: Oran Agra <oran@redislabs.com>
* man-like consistent long formatting
* Uppercases commands, subcommands and options
* Adds 'HELP' to HELP for all
* Lexicographical order
* Uses value notation and other .md likeness
* Moves const char *help to top
* Keeps it under 80 chars
* Misc help typos, consistent conjuctioning (i.e return and not returns)
* Uses addReplySubcommandSyntaxError(c) all over
Signed-off-by: Itamar Haber <itamar@redislabs.com>
If AOF file contains a long Lua script that timed out, then the `evalCommand` calls
`blockingOperationEnds` which sets `server.blocked_last_cron` to 0. later on,
the AOF `whileBlockedCron` function asserts that this value is not 0.
The fix allows nesting call to `blockingOperationStarts` and `blockingOperationEnds`.
The issue was first introduce in this commit: 9ef8d2f67 (Redis 6.2 RC1)
In #7726 (part of 6.2), we added a mechanism for whileBlockedCron, this
mechanism has an assertion to make sure the timestamp in
whileBlockedCron was always set correctly before the blocking operation
starts.
I now found (thanks to our CI) two bugs in that area:
1) CONFIG RESETSTAT (if it was allowed during loading) would have
cleared this var
2) the call stopLoading (which calls whileBlockedCron) was made too
early, while the rio is still in use, in which case the update_cksum
(rdbLoadProgressCallback) may still be called and whileBlockedCron
can assert.
This Commit pushes forward the observability on overall error statistics and command statistics within redis-server:
It extends INFO COMMANDSTATS to have
- failed_calls in - so we can keep track of errors that happen from the command itself, broken by command.
- rejected_calls - so we can keep track of errors that were triggered outside the commmand processing per se
Adds a new section to INFO, named ERRORSTATS that enables keeping track of the different errors that
occur within redis ( within processCommand and call ) based on the reply Error Prefix ( The first word
after the "-", up to the first space ).
This commit also fixes RM_ReplyWithError so that it can be correctly identified as an error reply.
Recently efaf09ee4 started using addReplyErrorSds in place of
addReplySds the later takes ownership of the string but the former did
not.
This introduced memory leaks when a script returns an error to redis,
and also in clusterRedirectClient (two new usages of
addReplyErrorSds which was mostly unused till now.
This commit chagnes two thanks.
1. change addReplyErrorSds to take ownership of the error string.
2. scripting.c doesn't actually need to use addReplyErrorSds, it's a
perfect match for addReplyErrorFormat (replaces newlines with spaces)
Adds: `L/RPOP <key> [count]`
Implements no. 2 of the following strategies:
1. Loop on listTypePop - this would result in multiple calls for memory freeing and allocating (see 769167a079)
2. Iterate the range to build the reply, then call quickListDelRange - this requires two iterations and **is the current choice**
3. Refactor quicklist to have a pop variant of quickListDelRange - probably optimal but more complex
Also:
* There's a historical check for NULL after calling listTypePop that was converted to an assert.
* This refactors common logic shared between LRANGE and the new form of LPOP/RPOP into addListRangeReply (adds test for b/w compat)
* Consequently, it may have made sense to have `LRANGE l -1 -2` and `LRANGE l 9 0` be legit and return a reverse reply. Due to historical reasons that would be, however, a breaking change.
* Added minimal comments to existing commands to adhere to the style, make core dev life easier and get commit karma, naturally.
When a database on a 64 bit build grows past 2^31 keys, the underlying hash table expands to 2^32 buckets. After this point, the algorithms for selecting random elements only return elements from half of the available buckets because they use random() which has a range of 0 to 2^31 - 1. This causes problems for eviction policies which use dictGetSomeKeys or dictGetRandomKey. Over time they cause the hash table to become unbalanced because, while new keys are spread out evenly across all buckets, evictions come from only half of the available buckets. Eventually this half of the table starts to run out of keys and it takes longer and longer to find candidates for eviction. This continues until no more evictions can happen.
This solution addresses this by using a 64 bit PRNG instead of libc random().
Co-authored-by: Greg Femec <gfemec@google.com>
Turns out that when the fork child crashes, the crash log was deleting
the pidfile from the disk (although the parent is still running.
Now we set the pidfile of the fork process to NULL so the fork process
will never deletes it.
In the distant history there was only the read flag for commands, and whatever
command that didn't have the read flag was a write one.
Then we added the write flag, but some portions of the code still used !read
Also some commands that don't work on the keyspace at all, still have the read
flag.
Changes in this commit:
1. remove the read-only flag from TIME, ECHO, ROLE and LASTSAVE
2. EXEC command used to decides if it should propagate a MULTI by looking at
the command flags (!read & !admin).
When i was about to change it to look at the write flag instead, i realized
that this would cause it not to propagate a MULTI for PUBLISH, EVAL, and
SCRIPT, all 3 are not marked as either a read command or a write one (as
they should), but all 3 are calling forceCommandPropagation.
So instead of introducing a new flag to denote a command that "writes" but
not into the keyspace, and still needs propagation, i decided to rely on
the forceCommandPropagation, and just fix the code to propagate MULTI when
needed rather than depending on the command flags at all.
The implication of my change then is that now it won't decide to propagate
MULTI when it sees one of these: SELECT, PING, INFO, COMMAND, TIME and
other commands which are neither read nor write.
3. Changing getNodeByQuery and clusterRedirectBlockedClientIfNeeded in
cluster.c to look at !write rather than read flag.
This should have no implications, since these code paths are only reachable
for commands which access keys, and these are always marked as either read
or write.
This commit improve MULTI propagation tests, for modules and a bunch of
other special cases, all of which used to pass already before that commit.
the only one that test change that uncovered a change of behavior is the
one that DELs a non-existing key, it used to propagate an empty
multi-exec block, and no longer does.
Exposes the main thread CPU info via info modules ( linux specific only )
(used_cpu_sys_main_thread and used_cpu_user_main_thread). This is important for:
- distinguish between main thread and io-threads cpu time total cpu time consumed ( check
what is the first bottleneck on the used config )
- distinguish between main thread and modules threads total cpu time consumed
Apart from it, this commit also exposes the server_time_usec within the Server section so that we can
properly differentiate consecutive collection and calculate for example the CPU% and or / cpu time vs
wall time, etc...
Add commands to query geospatial data with bounding box.
Two new commands that replace the existing 4 GEORADIUS* commands.
GEOSEARCH key [FROMMEMBER member] [FROMLOC long lat] [BYRADIUS radius
unit] [BYBOX width height unit] [WITHCORD] [WITHDIST] [WITHASH] [COUNT
count] [ASC|DESC]
GEOSEARCHSTORE dest_key src_key [FROMMEMBER member] [FROMLOC long lat]
[BYRADIUS radius unit] [BYBOX width height unit] [WITHCORD] [WITHDIST]
[WITHASH] [COUNT count] [ASC|DESC] [STOREDIST]
- Add two types of CIRCULAR_TYPE and RECTANGLE_TYPE to achieve different searches
- Judge whether the point is within the rectangle, refer to:
geohashGetDistanceIfInRectangle
The test creates keys with various encodings, DUMP them, corrupt the payload
and RESTORES it.
It utilizes the recently added use-exit-on-panic config to distinguish between
asserts and segfaults.
If the restore succeeds, it runs random commands on the key to attempt to
trigger a crash.
It runs in two modes, one with deep sanitation enabled and one without.
In the first one we don't expect any assertions or segfaults, in the second one
we expect assertions, but no segfaults.
We also check for leaks and invalid reads using valgrind, and if we find them
we print the commands that lead to that issue.
Changes in the code (other than the test):
- Replace a few NPD (null pointer deference) flows and division by zero with an
assertion, so that it doesn't fail the test. (since we set the server to use
`exit` rather than `abort` on assertion).
- Fix quite a lot of flows in rdb.c that could have lead to memory leaks in
RESTORE command (since it now responds with an error rather than panic)
- Add a DEBUG flag for SET-SKIP-CHECKSUM-VALIDATION so that the test don't need
to bother with faking a valid checksum
- Remove a pile of code in serverLogObjectDebugInfo which is actually unsafe to
run in the crash report (see comments in the code)
- fix a missing boundary check in lzf_decompress
test suite infra improvements:
- be able to run valgrind checks before the process terminates
- rotate log files when restarting servers
When loading an encoded payload we will at least do a shallow validation to
check that the size that's encoded in the payload matches the size of the
allocation.
This let's us later use this encoded size to make sure the various offsets
inside encoded payload don't reach outside the allocation, if they do, we'll
assert/panic, but at least we won't segfault or smear memory.
We can also do 'deep' validation which runs on all the records of the encoded
payload and validates that they don't contain invalid offsets. This lets us
detect corruptions early and reject a RESTORE command rather than accepting
it and asserting (crashing) later when accessing that payload via some command.
configuration:
- adding ACL flag skip-sanitize-payload
- adding config sanitize-dump-payload [yes/no/clients]
For now, we don't have a good way to ensure MIGRATE in cluster resharding isn't
being slowed down by these sanitation, so i'm setting the default value to `no`,
but later on it should be set to `clients` by default.
changes:
- changing rdbReportError not to `exit` in RESTORE command
- adding a new stat to be able to later check if cluster MIGRATE isn't being
slowed down by sanitation.
One way this was happening is when a module issued an RM_Call which would inject MULTI.
If the module command that does that was itself issued by something else that already did
added MULTI (e.g. another module, or a Lua script), it would have caused nested MULTI.
In fact the MULTI state in the client or the MULTI_EMITTED flag in the context isn't
the right indication that we need to propagate MULTI or not, because on a nested calls
(possibly a module action called by a keyspace event of another module action), these
flags aren't retained / reflected.
instead there's now a global propagate_in_transaction flag for that.
in addition to that, we now have a global in_eval and in_exec flags, to serve the flags
of RM_GetContextFlags, since their dependence on the current client is wrong for the same
reasons mentioned above.
As we know, redis may reject user's requests or evict some keys if
used memory is over maxmemory. Dictionaries expanding may make
things worse, some big dictionaries, such as main db and expires dict,
may eat huge memory at once for allocating a new big hash table and be
far more than maxmemory after expanding.
There are related issues: #4213#4583
More details, when expand dict in redis, we will allocate a new big
ht[1] that generally is double of ht[0], The size of ht[1] will be
very big if ht[0] already is big. For db dict, if we have more than
64 million keys, we need to cost 1GB for ht[1] when dict expands.
If the sum of used memory and new hash table of dict needed exceeds
maxmemory, we shouldn't allow the dict to expand. Because, if we
enable keys eviction, we still couldn't add much more keys after
eviction and rehashing, what's worse, redis will keep less keys when
redis only remains a little memory for storing new hash table instead
of users' data. Moreover users can't write data in redis if disable
keys eviction.
What this commit changed ?
Add a new member function expandAllowed for dict type, it provide a way
for caller to allow expand or not. We expose two parameters for this
function: more memory needed for expanding and dict current load factor,
users can implement a function to make a decision by them.
For main db dict and expires dict type, these dictionaries may be very
big and cost huge memory for expanding, so we implement a judgement
function: we can stop dict to expand provisionally if used memory will
be over maxmemory after dict expands, but to guarantee the performance
of redis, we still allow dict to expand if dict load factor exceeds the
safe load factor.
Add test cases to verify we don't allow main db to expand when left
memory is not enough, so that avoid keys eviction.
Other changes:
For new hash table size when expand. Before this commit, the size is
that double used of dict and later _dictNextPower. Actually we aim to
control a dict load factor between 0.5 and 1.0. Now we replace *2 with
+1, since the first check is that used >= size, the outcome of before
will usually be the same as _dictNextPower(used+1). The only case where
it'll differ is when dict_can_resize is false during fork, so that later
the _dictNextPower(used*2) will cause the dict to jump to *4 (i.e.
_dictNextPower(1025*2) will return 4096).
Fix rehash test cases due to changing algorithm of new hash table size
when expand.
Fixes#7923.
This PR appropriates the special `&` symbol (because `@` and `*` are taken),
followed by a literal value or pattern for describing the Pub/Sub patterns that
an ACL user can interact with. It is similar to the existing key patterns
mechanism in function (additive) and implementation (copy-pasta). It also adds
the allchannels and resetchannels ACL keywords, naturally.
The default user is given allchannels permissions, whereas new users get
whatever is defined by the acl-pubsub-default configuration directive. For
backward compatibility in 6.2, the default of this directive is allchannels but
this is likely to be changed to resetchannels in the next major version for
stronger default security settings.
Unless allchannels is set for the user, channel access permissions are checked
as follows :
* Calls to both PUBLISH and SUBSCRIBE will fail unless a pattern matching the
argumentative channel name(s) exists for the user.
* Calls to PSUBSCRIBE will fail unless the pattern(s) provided as an argument
literally exist(s) in the user's list.
Such failures are logged to the ACL log.
Runtime changes to channel permissions for a user with existing subscribing
clients cause said clients to disconnect unless the new permissions permit the
connections to continue. Note, however, that PSUBSCRIBErs' patterns are matched
literally, so given the change bar:* -> b*, pattern subscribers to bar:* will be
disconnected.
Notes/questions:
* UNSUBSCRIBE, PUNSUBSCRIBE and PUBSUB remain unprotected due to lack of reasons
for touching them.
this metric already includes the argv bytes, like what clientsCronTrackClientsMemUsage does, but it's missing the array itself.
p.s. For the purpose of tracking expensive clients we don't need to include the size of the client struct and the static reply buffer in it.
This is hopefully usually harmles.
The server.ready_keys will usually be empty so the code after releasing
the GIL will soon be done.
The only case where it'll actually process things is when a module
releases a client (or module) blocked on a key, by triggering this NOT
from within a command (e.g. a timer event).
This bug was introduced in redis 6.0.9, see #7903
Fix: When oom-score-adj-values is provided in the config file after
oom-score-adj yes, it'll take an immediate action, before
readOOMScoreAdj was acquired, resulting in an error (out of range score
due to uninitialized value. delay the reaction the real call is made by
main().
Since the values are clamped to -1000..1000, and they're
applied as an offset from the value at startup (which may be -1000), we
need to allow the offsets to reach to +2000 so that a value of +1000 is
achievable in case the value at startup was -1000.
Adding an option for absolute values rather than relative ones.
Blocking command should not be used with MULTI, LUA, and RM_Call. This is because,
the caller, who executes the command in this context, expects a reply.
Today, LUA and MULTI have a special (and different) treatment to blocking commands:
LUA - Most commands are marked with no-script flag which are checked when executing
and command from LUA, commands that are not marked (like XREAD) verify that their
blocking mode is not used inside LUA (by checking the CLIENT_LUA client flag).
MULTI - Command that is going to block, first verify that the client is not inside
multi (by checking the CLIENT_MULTI client flag). If the client is inside multi, they
return a result which is a match to the empty key with no timeout (for example blpop
inside MULTI will act as lpop)
For modules that perform RM_Call with blocking command, the returned results type is
REDISMODULE_REPLY_UNKNOWN and the caller can not really know what happened.
Disadvantages of the current state are:
No unified approach, LUA, MULTI, and RM_Call, each has a different treatment
Module can not safely execute blocking command (and get reply or error).
Though It is true that modules are not like LUA or MULTI and should be smarter not
to execute blocking commands on RM_Call, sometimes you want to execute a command base
on client input (for example if you create a module that provides a new scripting
language like javascript or python).
While modules (on modules command) can check for REDISMODULE_CTX_FLAGS_LUA or
REDISMODULE_CTX_FLAGS_MULTI to know not to block the client, there is no way to
check if the command came from another module using RM_Call. So there is no way
for a module to know not to block another module RM_Call execution.
This commit adds a way to unify the treatment for blocking clients by introducing
a new CLIENT_DENY_BLOCKING client flag. On LUA, MULTI, and RM_Call the new flag
turned on to signify that the client should not be blocked. A blocking command
verifies that the flag is turned off before blocking. If a blocking command sees
that the CLIENT_DENY_BLOCKING flag is on, it's not blocking and return results
which are matches to empty key with no timeout (as MULTI does today).
The new flag is checked on the following commands:
List blocking commands: BLPOP, BRPOP, BRPOPLPUSH, BLMOVE,
Zset blocking commands: BZPOPMIN, BZPOPMAX
Stream blocking commands: XREAD, XREADGROUP
SUBSCRIBE, PSUBSCRIBE, MONITOR
In addition, the new flag is turned on inside the AOF client, we do not want to
block the AOF client to prevent deadlocks and commands ordering issues (and there
is also an existing assert in the code that verifies it).
To keep backward compatibility on LUA, all the no-script flags on existing commands
were kept untouched. In addition, a LUA special treatment on XREAD and XREADGROUP was kept.
To keep backward compatibility on MULTI (which today allows SUBSCRIBE, and PSUBSCRIBE).
We added a special treatment on those commands to allow executing them on MULTI.
The only backward compatibility issue that this PR introduces is that now MONITOR
is not allowed inside MULTI.
Tests were added to verify blocking commands are not blocking the client on LUA, MULTI,
or RM_Call. Tests were added to verify the module can check for CLIENT_DENY_BLOCKING flag.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Itamar Haber <itamar@redislabs.com>
