The test failed on MacOS:
```
*** [err]: EXPIRE precision is now the millisecond in tests/unit/expire.tcl
Expected 'somevalue {}' to equal or match '{} {}'
```
`set a [r get x]`, even though we tried 10 times, sometimes we
still get {}, this is a time-sensitive test.
In this PR, we add the following changes:
1. More attempts, change it from 10 to 30.
2. More tolerant, change the `after 900` to `after 800`.
In addition, we judging $a in advance and changing `after 1100`
to `after 300`, this will save us some times.
When `RM_ZsetAdd()`/`RM_ZsetIncrby()`/`RM_StreamAdd()` fails, if a new key happens to
be created using `moduleCreateEmptyKey()`, we should clean up the empty key.
## Test
1) Add new module commands(`zset.add` and `zset.incrby`) to cover `RM_ZsetAdd()`/`RM_ZsetIncrby()`.
2) Add a large-memory test to cover `RM_StreamAdd()`.
Tests occasionally fail since #12000:
```
*** [err]: query buffer resized correctly when not idle in tests/unit/querybuf.tcl
Expected 0 > 32768 (context: type eval line 11 cmd {assert {$orig_test_client_qbuf > 32768}} proc ::test)
*** [err]: query buffer resized correctly with fat argv in tests/unit/querybuf.tcl
query buffer should not be resized when client idle time smaller than 2s
```
The reason may be because we set hz to 100, querybuf shrinks before we count
client_query_buffer. We avoid this problem by setting pause-cron to 1.
1. reset the readraw mode after a test that uses it. undetected since the
only test after that on the same server didn't read any replies.
2. fix a cross slot issue that was undetected in cluster mode because
readraw doesn't throw exceptions on errors.
Minor test case addition for DECR and DECRBY.
Currently DECR and DECRBY do not have test case coverage for the
scenarios where they run on a non-existing key.
In order to speed up tests, avoid saving an RDB (mostly notable on shutdown),
except for tests that explicitly test the RDB mechanism
In addition, use `shutdown-on-sigterm force` to prevetn shutdown from failing
in case the server is in the middle of the initial AOFRW
Also a a test that checks that the `shutdown-on-sigterm default` is to refuse
shutdown if there's an initial AOFRW
Co-authored-by: Guy Benoish <guy.benoish@redislabs.com>
Minor test case addition.
Currently GETRANGE command does not have the test case coverage for the scenarios:
An error is returned when key exists but of different type
Added missing test cases for getrange command.
this pr fix two wrongs：
1. When client’s querybuf is pre-allocated for a fat argv, we need to update the
querybuf_peak of the client immediately to completely avoid the unexpected
shrinking of querybuf in the next clientCron (before data arrives to set the peak).
2. the protocol's bulklen does not include `\r\n`, but the allocation and the data we
read does. so in `clientsCronResizeQueryBuffer`, the `resize` or `querybuf_peak`
should add these 2 bytes.
the first bug is likely to hit us on large payloads over slow connections, in which case
transferring the payload can take longer and a cron event will be triggered (specifically
if there are not a lot of clients)
There is are some missing test cases for SUBSTR command.
These might already be covered by GETRANGE, but no harm in adding them since they're simple.
Added 3 test case.
* start > stop
* start and stop both greater than string length
* when no key is present.
Currently LINSERT command does not have the test case coverage for following scenarios.
1. When key does not exist, it is considered an empty list and no operation is performed.
2. An error is returned when key exists but does not hold a list value.
Added above two missing test cases for linsert command.
* Add RM_ReplyWithErrorFormat that can support format
Reply with the error create from a printf format and arguments.
If the error code is already passed in the string 'fmt', the error
code provided is used, otherwise the string "-ERR " for the generic
error code is automatically added.
The usage is, for example:
RedisModule_ReplyWithErrorFormat(ctx, "An error: %s", "foo");
RedisModule_ReplyWithErrorFormat(ctx, "-WRONGTYPE Wrong Type: %s", "foo");
The function always returns REDISMODULE_OK.
The MacOS CI in github actions often hangs without any logs. GH argues that
it's due to resource utilization, either running out of disk space, memory, or CPU
starvation, and thus the runner is terminated.
This PR contains multiple attempts to resolve this:
1. introducing pause_process instead of SIGSTOP, which waits for the process
to stop before resuming the test, possibly resolving race conditions in some tests,
this was a suspect since there was one test that could result in an infinite loop in that
case, in practice this didn't help, but still a good idea to keep.
2. disable the `save` config in many tests that don't need it, specifically ones that use
heavy writes and could create large files.
3. change the `populate` proc to use short pipeline rather than an infinite one.
4. use `--clients 1` in the macos CI so that we don't risk running multiple resource
demanding tests in parallel.
5. enable `--verbose` to be repeated to elevate verbosity and print more info to stdout
when a test or a server starts.
We do have ZREMRANGEBYLEX tests, but it is a stress test
marked with slow tag and then skipped in reply-schemas daily.
In the past, we were able to succeed on a daily, i guess
it was because there were some random command executions,
such as corrupt-dump-fuzzy, which might call it.
These test examples are taken from ZRANGEBYLEX basics test.
Add `RM_RdbLoad()` and `RM_RdbSave()` to load/save RDB files from the module API.
In our use case, we have our clustering implementation as a module. As part of this
implementation, the module needs to trigger RDB save operation at specific points.
Also, this module delivers RDB files to other nodes (not using Redis' replication).
When a node receives an RDB file, it should be able to load the RDB. Currently,
there is no module API to save/load RDB files.
This PR adds four new APIs:
```c
RedisModuleRdbStream *RM_RdbStreamCreateFromFile(const char *filename);
void RM_RdbStreamFree(RedisModuleRdbStream *stream);
int RM_RdbLoad(RedisModuleCtx *ctx, RedisModuleRdbStream *stream, int flags);
int RM_RdbSave(RedisModuleCtx *ctx, RedisModuleRdbStream *stream, int flags);
```
The first step is to create a `RedisModuleRdbStream` object. This PR provides a function to
create RedisModuleRdbStream from the filename. (You can load/save RDB with the filename).
In the future, this API can be extended if needed:
e.g., `RM_RdbStreamCreateFromFd()`, `RM_RdbStreamCreateFromSocket()` to save/load
RDB from an `fd` or a `socket`.
Usage:
```c
/* Save RDB */
RedisModuleRdbStream *stream = RedisModule_RdbStreamCreateFromFile("example.rdb");
RedisModule_RdbSave(ctx, stream, 0);
RedisModule_RdbStreamFree(stream);
/* Load RDB */
RedisModuleRdbStream *stream = RedisModule_RdbStreamCreateFromFile("example.rdb");
RedisModule_RdbLoad(ctx, stream, 0);
RedisModule_RdbStreamFree(stream);
```
The existing logic for killing pub-sub clients did not handle the `allchannels`
permission correctly. For example, if you:
ACL SETUSER foo allchannels
Have a client authenticate as the user `foo` and subscribe to a channel, and then:
ACL SETUSER foo resetchannels
The subscribed client would not be disconnected, though new clients under that user
would be blocked from subscribing to any channels.
This was caused by an incomplete optimization in `ACLKillPubsubClientsIfNeeded`
checking whether the new channel permissions were a strict superset of the old ones.
This PR fix several unrelated bugs that were discovered by the same set of tests
(WAITAOF tests in #11713), could make the `WAITAOF` test hang.
The change in `backgroundRewriteDoneHandler` is about MP-AOF.
That leftover / old code assumes that we started a new AOF file just now
(when we have a new base into which we're gonna incrementally write), but
the fact is that with MP-AOF, the fork done handler doesn't really affect the
incremental file being maintained by the parent process, there's no reason to
re-issue `SELECT`, and no reason to update any of the fsync variables in that flow.
This should have been deleted with MP-AOF (introduced in #9788, 7.0).
The damage is that the update to `aof_fsync_offset` will cause us to miss an fsync
in `flushAppendOnlyFile`, that happens if we stop write commands in `AOF_FSYNC_EVERYSEC`
while an AOFRW is in progress. This caused a new `WAITAOF` test to sometime hang forever.
Also because of MP-AOF, we needed to change `aof_fsync_offset` to `aof_last_incr_fsync_offset`
and match it to `aof_last_incr_size` in `flushAppendOnlyFile`. This is because in the past we compared
`aof_fsync_offset` and `aof_current_size`, but with MP-AOF it could be the total AOF file will be
smaller after AOFRW, and the (already existing) incr file still has data that needs to be fsynced.
The change in `flushAppendOnlyFile`, about the `AOF_FSYNC_ALWAYS`, it is follow #6053
(the details is in #5985), we also check `AOF_FSYNC_ALWAYS` to handle a case where
appendfsync is changed from everysec to always while there is data that's written but not yet fsynced.
Since we remove the COMMAND COUNT call in sentinel test in #11950,
reply-schemas-validator started reporting this error:
```
WARNING! The following commands were not hit at all:
command|count
ERROR! at least one command was not hit by the tests
```
This PR add a COMMAND COUNT test to cover it and also fix some
typos in req-res-log-validator.py
This PR allows clients to send information about the client library to redis
to be displayed in CLIENT LIST and CLIENT INFO.
Currently supports:
`CLIENT [lib-name | lib-ver] <value>`
Client libraries are expected to pipeline these right after AUTH, and ignore
the failure in case they're talking to an older version of redis.
These will be shown in CLIENT LIST and CLIENT INFO as:
* `lib-name` - meant to hold the client library name.
* `lib-ver` - meant to hold the client library version.
The values cannot contain spaces, newlines and any wild ASCII characters,
but all other normal chars are accepted, e.g `.`, `=` etc (same as CLIENT NAME).
The RESET command does NOT clear these, but they can be cleared to the
default by sending a command with a blank string.
Co-authored-by: Oran Agra <oran@redislabs.com>
This allows modules to register commands to existing ACL categories and blocks the creation of [sub]commands, datatypes and registering the configs outside of the OnLoad function.
For allowing modules to register commands to existing ACL categories,
This PR implements a new API int RM_SetCommandACLCategories() which takes a pointer to a RedisModuleCommand and a C string aclflags containing the set of space separated ACL categories.
Example, 'write slow' marks the command as part of the write and slow ACL categories.
The C string aclflags is tokenized by implementing a helper function categoryFlagsFromString(). Theses tokens are matched and the corresponding ACL categories flags are set by a helper function matchAclCategoriesFlags. The helper function categoryFlagsFromString() returns the corresponding categories_flags or returns -1 if some token not processed correctly.
If the module contains commands which are registered to existing ACL categories, the number of [sub]commands are tracked by num_commands_with_acl_categories in struct RedisModule. Further, the allowed command bit-map of the existing users are recomputed from the command_rules list, by implementing a function called ACLRecomputeCommandBitsFromCommandRulesAllUsers() for the existing users to have access to the module commands on runtime.
## Breaking change
This change requires that registering commands and subcommands only occur during a modules "OnLoad" function, in order to allow efficient recompilation of ACL bits. We also chose to block registering configs and types, since we believe it's only valid for those to be created during onLoad. We check for this onload flag in struct RedisModule to check if the call is made from the OnLoad function.
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
I saw this error once, in the FreeBSD Daily CI:
```
*** [err]: Temp rdb will be deleted if we use bg_unlink when shutdown in tests/unit/shutdown.tcl
Expected [file exists /xxx/temp-10336.rdb] (context: type eval line 15 cmd {assert {[file exists $temp_rdb]}} proc ::test)
```
The log shows that bgsave was executed, and it was successfully executed in the end:
```
Starting test Temp rdb will be deleted if we use bg_unlink when shutdown in tests/unit/shutdown.tcl
10251:M 22 Feb 2023 11:37:25.441 * Background saving started by pid 10336
10336:C 22 Feb 2023 11:37:27.949 * DB saved on disk
10336:C 22 Feb 2023 11:37:27.949 * Fork CoW for RDB: current 0 MB, peak 0 MB, average 0 MB
10251:M 22 Feb 2023 11:37:28.060 * Background saving terminated with success
```
There may be two reasons:
1. The child process has been created, but it has not created
the temp rdb file yet, so [file exists $temp_rdb] check failed.
2. The child process bgsave has been executed successfully and the
temp file has been deleted, so [file exists $temp_rdb] check failed.
From the logs pint, it should be the case 2, case 1 is too extreme,
set rdb-key-save-delay to a higher value to ensure bgsave does not
succeed early to avoid this case.
Previously we would run the module command filters even upon blocked
command reprocessing. This could modify the command, and it's args.
This is irrelevant in the context of a command being reprocessed (it already
went through the filters), as well as breaks the crashed command lookup
that exists in the case of a reprocessed command.
fixes#11894.
Co-authored-by: Oran Agra <oran@redislabs.com>
Allow running blocking commands from within a module using `RM_Call`.
Today, when `RM_Call` is used, the fake client that is used to run command
is marked with `CLIENT_DENY_BLOCKING` flag. This flag tells the command
that it is not allowed to block the client and in case it needs to block, it must
fallback to some alternative (either return error or perform some default behavior).
For example, `BLPOP` fallback to simple `LPOP` if it is not allowed to block.
All the commands must respect the `CLIENT_DENY_BLOCKING` flag (including
module commands). When the command invocation finished, Redis asserts that
the client was not blocked.
This PR introduces the ability to call blocking command using `RM_Call` by
passing a callback that will be called when the client will get unblocked.
In order to do that, the user must explicitly say that he allow to perform blocking
command by passing a new format specifier argument, `K`, to the `RM_Call`
function. This new flag will tell Redis that it is allow to run blocking command
and block the client. In case the command got blocked, Redis will return a new
type of call reply (`REDISMODULE_REPLY_PROMISE`). This call reply indicates
that the command got blocked and the user can set the on_unblocked handler using
`RM_CallReplyPromiseSetUnblockHandler`.
When clients gets unblocked, it eventually reaches `processUnblockedClients` function.
This is where we check if the client is a fake module client and if it is, we call the unblock
callback instead of performing the usual unblock operations.
**Notice**: `RM_CallReplyPromiseSetUnblockHandler` must be called atomically
along side the command invocation (without releasing the Redis lock in between).
In addition, unlike other CallReply types, the promise call reply must be released
by the module when the Redis GIL is acquired.
The module can abort the execution on the blocking command (if it was not yet
executed) using `RM_CallReplyPromiseAbort`. the API will return `REDISMODULE_OK`
on success and `REDISMODULE_ERR` if the operation is already executed.
**Notice** that in case of misbehave module, Abort might finished successfully but the
operation will not really be aborted. This can only happened if the module do not respect
the disconnect callback of the blocked client.
For pure Redis commands this can not happened.
### Atomicity Guarantees
The API promise that the unblock handler will run atomically as an execution unit.
This means that all the operation performed on the unblock handler will be wrapped
with a multi exec transaction when replicated to the replica and AOF.
The API **do not** grantee any other atomicity properties such as when the unblock
handler will be called. This gives us the flexibility to strengthen the grantees (or not)
in the future if we will decide that we need a better guarantees.
That said, the implementation **does** provide a better guarantees when performing
pure Redis blocking command like `BLPOP`. In this case the unblock handler will run
atomically with the operation that got unblocked (for example, in case of `BLPOP`, the
unblock handler will run atomically with the `LPOP` operation that run when the command
got unblocked). This is an implementation detail that might be change in the future and the
module writer should not count on that.
### Calling blocking commands while running on script mode (`S`)
`RM_Call` script mode (`S`) was introduced on #0372. It is used for usecases where the
command that was invoked on `RM_Call` comes from a user input and we want to make
sure the user will not run dangerous commands like `shutdown`. Some command, such
as `BLPOP`, are marked with `NO_SCRIPT` flag, which means they will not be allowed on
script mode. Those commands are marked with `NO_SCRIPT` just because they are
blocking commands and not because they are dangerous. Now that we can run blocking
commands on RM_Call, there is no real reason not to allow such commands on script mode.
The underline problem is that the `NO_SCRIPT` flag is abused to also mark some of the
blocking commands (notice that those commands know not to block the client if it is not
allowed to do so, and have a fallback logic to such cases. So even if those commands
were not marked with `NO_SCRIPT` flag, it would not harm Redis, and today we can
already run those commands within multi exec).
In addition, not all blocking commands are marked with `NO_SCRIPT` flag, for example
`blmpop` are not marked and can run from within a script.
Those facts shows that there are some ambiguity about the meaning of the `NO_SCRIPT`
flag, and its not fully clear where it should be use.
The PR suggest that blocking commands should not be marked with `NO_SCRIPT` flag,
those commands should handle `CLIENT_DENY_BLOCKING` flag and only block when
it's safe (like they already does today). To achieve that, the PR removes the `NO_SCRIPT`
flag from the following commands:
* `blmove`
* `blpop`
* `brpop`
* `brpoplpush`
* `bzpopmax`
* `bzpopmin`
* `wait`
This might be considered a breaking change as now, on scripts, instead of getting
`command is not allowed from script` error, the user will get some fallback behavior
base on the command implementation. That said, the change matches the behavior
of scripts and multi exec with respect to those commands and allow running them on
`RM_Call` even when script mode is used.
### Additional RedisModule API and changes
* `RM_BlockClientSetPrivateData` - Set private data on the blocked client without the
need to unblock the client. This allows up to set the promise CallReply as the private
data of the blocked client and abort it if the client gets disconnected.
* `RM_BlockClientGetPrivateData` - Return the current private data set on a blocked client.
We need it so we will have access to this private data on the disconnect callback.
* On RM_Call, the returned reply will be added to the auto memory context only if auto
memory is enabled, this allows us to keep the call reply for longer time then the context
lifetime and does not force an unneeded borrow relationship between the CallReply and
the RedisModuleContext.
This change adds new module callbacks that can override the default password based authentication associated with ACLs. With this, Modules can register auth callbacks through which they can implement their own Authentication logic. When `AUTH` and `HELLO AUTH ...` commands are used, Module based authentication is attempted and then normal password based authentication is attempted if needed.
The new Module APIs added in this PR are - `RM_RegisterCustomAuthCallback` and `RM_BlockClientOnAuth` and `RedisModule_ACLAddLogEntryByUserName `.
Module based authentication will be attempted for all Redis users (created through the ACL SETUSER cmd or through Module APIs) even if the Redis user does not exist at the time of the command. This gives a chance for the Module to create the RedisModule user and then authenticate via the RedisModule API - from the custom auth callback.
For the AUTH command, we will support both variations - `AUTH <username> <password>` and `AUTH <password>`. In case of the `AUTH <password>` variation, the custom auth callbacks are triggered with “default” as the username and password as what is provided.
### RedisModule_RegisterCustomAuthCallback
```
void RM_RegisterCustomAuthCallback(RedisModuleCtx *ctx, RedisModuleCustomAuthCallback cb) {
```
This API registers a callback to execute to prior to normal password based authentication. Multiple callbacks can be registered across different modules. These callbacks are responsible for either handling the authentication, each authenticating the user or explicitly denying, or deferring it to other authentication mechanisms. Callbacks are triggered in the order they were registered. When a Module is unloaded, all the auth callbacks registered by it are unregistered. The callbacks are attempted, in the order of most recently registered callbacks, when the AUTH/HELLO (with AUTH field is provided) commands are called. The callbacks will be called with a module context along with a username and a password, and are expected to take one of the following actions:
(1) Authenticate - Use the RM_Authenticate* API successfully and return `REDISMODULE_AUTH_HANDLED`. This will immediately end the auth chain as successful and add the OK reply.
(2) Block a client on authentication - Use the `RM_BlockClientOnAuth` API and return `REDISMODULE_AUTH_HANDLED`. Here, the client will be blocked until the `RM_UnblockClient `API is used which will trigger the auth reply callback (provided earlier through the `RM_BlockClientOnAuth`). In this reply callback, the Module should authenticate, deny or skip handling authentication.
(3) Deny Authentication - Return `REDISMODULE_AUTH_HANDLED` without authenticating or blocking the client. Optionally, `err` can be set to a custom error message. This will immediately end the auth chain as unsuccessful and add the ERR reply.
(4) Skip handling Authentication - Return `REDISMODULE_AUTH_NOT_HANDLED` without blocking the client. This will allow the engine to attempt the next custom auth callback.
If none of the callbacks authenticate or deny auth, then password based auth is attempted and will authenticate or add failure logs and reply to the clients accordingly.
### RedisModule_BlockClientOnAuth
```
RedisModuleBlockedClient *RM_BlockClientOnAuth(RedisModuleCtx *ctx, RedisModuleCustomAuthCallback reply_callback,
void (*free_privdata)(RedisModuleCtx*,void*))
```
This API can only be used from a Module from the custom auth callback. If a client is not in the middle of custom module based authentication, ERROR is returned. Otherwise, the client is blocked and the `RedisModule_BlockedClient` is returned similar to the `RedisModule_BlockClient` API.
### RedisModule_ACLAddLogEntryByUserName
```
int RM_ACLAddLogEntryByUserName(RedisModuleCtx *ctx, RedisModuleString *username, RedisModuleString *object, RedisModuleACLLogEntryReason reason)
```
Adds a new entry in the ACL log with the `username` RedisModuleString provided. This simplifies the Module usage because now, developers do not need to create a Module User just to add an error ACL Log entry. Aside from accepting username (RedisModuleString) instead of a RedisModuleUser, it is the same as the existing `RedisModule_ACLAddLogEntry` API.
### Breaking changes
- HELLO command - Clients can now only set the client name and RESP protocol from the `HELLO` command if they are authenticated. Also, we now finish command arg validation first and return early with a ERR reply if any arg is invalid. This is to avoid mutating the client name / RESP from a command that would have failed on invalid arguments.
### Notable behaviors
- Module unblocking - Now, we will not allow Modules to block the client from inside the context of a reply callback (triggered from the Module unblock flow `moduleHandleBlockedClients`).
---------
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
There be a situation that satisfies WAIT, and then wrongly unblock
WAITAOF because we mix-use last_offset and last_numreplicas.
We update last_offset and last_numreplicas only when the condition
matches. i.e. output of either replicationCountAOFAcksByOffset or
replicationCountAcksByOffset is right.
In this case, we need to have separate last_ variables for each of
them. Added a last_aof_offset and last_aof_numreplicas for WAITAOF.
WAITAOF was added in #11713. Found while coding #11917.
A Test was added to validate that case.
WAITAOF wad added in #11713, its return is an array.
But forget to handle WAITAOF in last_offset and last_numreplicas,
causing WAITAOF to return a WAIT like reply.
Tests was added to validate that case (both WAIT and WAITAOF).
This PR also refactored processClientsWaitingReplicas a bit for better
maintainability and readability.
Implementing the WAITAOF functionality which would allow the user to
block until a specified number of Redises have fsynced all previous write
commands to the AOF.
Syntax: `WAITAOF <num_local> <num_replicas> <timeout>`
Response: Array containing two elements: num_local, num_replicas
num_local is always either 0 or 1 representing the local AOF on the master.
num_replicas is the number of replicas that acknowledged the a replication
offset of the last write being fsynced to the AOF.
Returns an error when called on replicas, or when called with non-zero
num_local on a master with AOF disabled, in all other cases the response
just contains number of fsync copies.
Main changes:
* Added code to keep track of replication offsets that are confirmed to have
been fsynced to disk.
* Keep advancing master_repl_offset even when replication is disabled (and
there's no replication backlog, only if there's an AOF enabled).
This way we can use this command and it's mechanisms even when replication
is disabled.
* Extend REPLCONF ACK to `REPLCONF ACK <ofs> FACK <ofs>`, the FACK
will be appended only if there's an AOF on the replica, and already ignored on
old masters (thus backwards compatible)
* WAIT now no longer wait for the replication offset after your last command, but
rather the replication offset after your last write (or read command that caused
propagation, e.g. lazy expiry).
Unrelated changes:
* WAIT command respects CLIENT_DENY_BLOCKING (not just CLIENT_MULTI)
Implementation details:
* Add an atomic var named `fsynced_reploff_pending` that's updated
(usually by the bio thread) and later copied to the main `fsynced_reploff`
variable (only if the AOF base file exists).
I.e. during the initial AOF rewrite it will not be used as the fsynced offset
since the AOF base is still missing.
* Replace close+fsync bio job with new BIO_CLOSE_AOF (AOF specific)
job that will also update fsync offset the field.
* Handle all AOF jobs (BIO_CLOSE_AOF, BIO_AOF_FSYNC) in the same bio
worker thread, to impose ordering on their execution. This solves a
race condition where a job could set `fsynced_reploff_pending` to a higher
value than another pending fsync job, resulting in indicating an offset
for which parts of the data have not yet actually been fsynced.
Imposing an ordering on the jobs guarantees that fsync jobs are executed
in increasing order of replication offset.
* Drain bio jobs when switching `appendfsync` to "always"
This should prevent a write race between updates to `fsynced_reploff_pending`
in the main thread (`flushAppendOnlyFile` when set to ALWAYS fsync), and
those done in the bio thread.
* Drain the pending fsync when starting over a new AOF to avoid race conditions
with the previous AOF offsets overriding the new one (e.g. after switching to
replicate from a new master).
* Make sure to update the fsynced offset at the end of the initial AOF rewrite.
a must in case there are no additional writes that trigger a periodic fsync,
specifically for a replica that does a full sync.
Limitations:
It is possible to write a module and a Lua script that propagate to the AOF and doesn't
propagate to the replication stream. see REDISMODULE_ARGV_NO_REPLICAS and luaRedisSetReplCommand.
These features are incompatible with the WAITAOF command, and can result
in two bad cases. The scenario is that the user executes command that only
propagates to AOF, and then immediately
issues a WAITAOF, and there's no further writes on the replication stream after that.
1. if the the last thing that happened on the replication stream is a PING
(which increased the replication offset but won't trigger an fsync on the replica),
then the client would hang forever (will wait for an fack that the replica will never
send sine it doesn't trigger any fsyncs).
2. if the last thing that happened is a write command that got propagated properly,
then WAITAOF will be released immediately, without waiting for an fsync (since
the offset didn't change)
Refactoring:
* Plumbing to allow bio worker to handle multiple job types
This introduces infrastructure necessary to allow BIO workers to
not have a 1-1 mapping of worker to job-type. This allows in the
future to assign multiple job types to a single worker, either as
a performance/resource optimization, or as a way of enforcing
ordering between specific classes of jobs.
Co-authored-by: Oran Agra <oran@redislabs.com>
This bug seems to be there forever, CLIENT REPLY OFF|SKIP will
mark the client with CLIENT_REPLY_OFF or CLIENT_REPLY_SKIP flags.
With these flags, prepareClientToWrite called by addReply* will
return C_ERR directly. So the client can't receive the Pub/Sub
messages and any other push notifications, e.g client side tracking.
In this PR, we adding a CLIENT_PUSHING flag, disables the reply
silencing flags. When adding push replies, set the flag, after the reply,
clear the flag. Then add the flag check in prepareClientToWrite.
Fixes#11874
Note, the SUBSCRIBE command response is a bit awkward,
see https://github.com/redis/redis-doc/pull/2327
Co-authored-by: Oran Agra <oran@redislabs.com>
Work in progress towards implementing a reply schema as part of COMMAND DOCS, see #9845
Since ironing the details of the reply schema of each and every command can take a long time, we
would like to merge this PR when the infrastructure is ready, and let this mature in the unstable branch.
Meanwhile the changes of this PR are internal, they are part of the repo, but do not affect the produced build.
### Background
In #9656 we add a lot of information about Redis commands, but we are missing information about the replies
### Motivation
1. Documentation. This is the primary goal.
2. It should be possible, based on the output of COMMAND, to be able to generate client code in typed
languages. In order to do that, we need Redis to tell us, in detail, what each reply looks like.
3. We would like to build a fuzzer that verifies the reply structure (for now we use the existing
testsuite, see the "Testing" section)
### Schema
The idea is to supply some sort of schema for the various replies of each command.
The schema will describe the conceptual structure of the reply (for generated clients), as defined in RESP3.
Note that the reply structure itself may change, depending on the arguments (e.g. `XINFO STREAM`, with
and without the `FULL` modifier)
We decided to use the standard json-schema (see https://json-schema.org/) as the reply-schema.
Example for `BZPOPMIN`:
```
"reply_schema": {
"oneOf": [
{
"description": "Timeout reached and no elements were popped.",
"type": "null"
},
{
"description": "The keyname, popped member, and its score.",
"type": "array",
"minItems": 3,
"maxItems": 3,
"items": [
{
"description": "Keyname",
"type": "string"
},
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
]
}
```
#### Notes
1. It is ok that some commands' reply structure depends on the arguments and it's the caller's responsibility
to know which is the relevant one. this comes after looking at other request-reply systems like OpenAPI,
where the reply schema can also be oneOf and the caller is responsible to know which schema is the relevant one.
2. The reply schemas will describe RESP3 replies only. even though RESP3 is structured, we want to use reply
schema for documentation (and possibly to create a fuzzer that validates the replies)
3. For documentation, the description field will include an explanation of the scenario in which the reply is sent,
including any relation to arguments. for example, for `ZRANGE`'s two schemas we will need to state that one
is with `WITHSCORES` and the other is without.
4. For documentation, there will be another optional field "notes" in which we will add a short description of
the representation in RESP2, in case it's not trivial (RESP3's `ZRANGE`'s nested array vs. RESP2's flat
array, for example)
Given the above:
1. We can generate the "return" section of all commands in [redis-doc](https://redis.io/commands/)
(given that "description" and "notes" are comprehensive enough)
2. We can generate a client in a strongly typed language (but the return type could be a conceptual
`union` and the caller needs to know which schema is relevant). see the section below for RESP2 support.
3. We can create a fuzzer for RESP3.
### Limitations (because we are using the standard json-schema)
The problem is that Redis' replies are more diverse than what the json format allows. This means that,
when we convert the reply to a json (in order to validate the schema against it), we lose information (see
the "Testing" section below).
The other option would have been to extend the standard json-schema (and json format) to include stuff
like sets, bulk-strings, error-string, etc. but that would mean also extending the schema-validator - and that
seemed like too much work, so we decided to compromise.
Examples:
1. We cannot tell the difference between an "array" and a "set"
2. We cannot tell the difference between simple-string and bulk-string
3. we cannot verify true uniqueness of items in commands like ZRANGE: json-schema doesn't cover the
case of two identical members with different scores (e.g. `[["m1",6],["m1",7]]`) because `uniqueItems`
compares (member,score) tuples and not just the member name.
### Testing
This commit includes some changes inside Redis in order to verify the schemas (existing and future ones)
are indeed correct (i.e. describe the actual response of Redis).
To do that, we added a debugging feature to Redis that causes it to produce a log of all the commands
it executed and their replies.
For that, Redis needs to be compiled with `-DLOG_REQ_RES` and run with
`--reg-res-logfile <file> --client-default-resp 3` (the testsuite already does that if you run it with
`--log-req-res --force-resp3`)
You should run the testsuite with the above args (and `--dont-clean`) in order to make Redis generate
`.reqres` files (same dir as the `stdout` files) which contain request-response pairs.
These files are later on processed by `./utils/req-res-log-validator.py` which does:
1. Goes over req-res files, generated by redis-servers, spawned by the testsuite (see logreqres.c)
2. For each request-response pair, it validates the response against the request's reply_schema
(obtained from the extended COMMAND DOCS)
5. In order to get good coverage of the Redis commands, and all their different replies, we chose to use
the existing redis test suite, rather than attempt to write a fuzzer.
#### Notes about RESP2
1. We will not be able to use the testing tool to verify RESP2 replies (we are ok with that, it's time to
accept RESP3 as the future RESP)
2. Since the majority of the test suite is using RESP2, and we want the server to reply with RESP3
so that we can validate it, we will need to know how to convert the actual reply to the one expected.
- number and boolean are always strings in RESP2 so the conversion is easy
- objects (maps) are always a flat array in RESP2
- others (nested array in RESP3's `ZRANGE` and others) will need some special per-command
handling (so the client will not be totally auto-generated)
Example for ZRANGE:
```
"reply_schema": {
"anyOf": [
{
"description": "A list of member elements",
"type": "array",
"uniqueItems": true,
"items": {
"type": "string"
}
},
{
"description": "Members and their scores. Returned in case `WITHSCORES` was used.",
"notes": "In RESP2 this is returned as a flat array",
"type": "array",
"uniqueItems": true,
"items": {
"type": "array",
"minItems": 2,
"maxItems": 2,
"items": [
{
"description": "Member",
"type": "string"
},
{
"description": "Score",
"type": "number"
}
]
}
}
]
}
```
### Other changes
1. Some tests that behave differently depending on the RESP are now being tested for both RESP,
regardless of the special log-req-res mode ("Pub/Sub PING" for example)
2. Update the history field of CLIENT LIST
3. Added basic tests for commands that were not covered at all by the testsuite
### TODO
- [x] (maybe a different PR) add a "condition" field to anyOf/oneOf schemas that refers to args. e.g.
when `SET` return NULL, the condition is `arguments.get||arguments.condition`, for `OK` the condition
is `!arguments.get`, and for `string` the condition is `arguments.get` - https://github.com/redis/redis/issues/11896
- [x] (maybe a different PR) also run `runtest-cluster` in the req-res logging mode
- [x] add the new tests to GH actions (i.e. compile with `-DLOG_REQ_RES`, run the tests, and run the validator)
- [x] (maybe a different PR) figure out a way to warn about (sub)schemas that are uncovered by the output
of the tests - https://github.com/redis/redis/issues/11897
- [x] (probably a separate PR) add all missing schemas
- [x] check why "SDOWN is triggered by misconfigured instance replying with errors" fails with --log-req-res
- [x] move the response transformers to their own file (run both regular, cluster, and sentinel tests - need to
fight with the tcl including mechanism a bit)
- [x] issue: module API - https://github.com/redis/redis/issues/11898
- [x] (probably a separate PR): improve schemas: add `required` to `object`s - https://github.com/redis/redis/issues/11899
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
Co-authored-by: Hanna Fadida <hanna.fadida@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Shaya Potter <shaya@redislabs.com>
This PR has two parts:
1. Fix flaky test case, the previous tests set a lot of volatile keys,
it injects an unexpected DEL command into the replication stream during
the later test, causing it to fail. Add a flushall to avoid it.
2. Improve assert_replication_stream, now it can print the whole stream
rather than just the failing line.
Currently (starting at #11012) When a module is blocked on keys it sets the
CLIENT_PENDING_COMMAND flag.
However in case the module decides to unblock the client not via the regular flow
(eg timeout, key signal or CLIENT UNBLOCK command) it will attempt to reprocess the
module command and potentially blocked again.
This fix remove the CLIENT_PENDING_COMMAND flag in case blockedForKeys is
issued from module context.
I've seen it fail here (test-centos7-tls-module-no-tls and test-freebsd):
```
*** [err]: Operations in no-touch mode do not alter the last access time of a key in tests/unit/introspection-2.tcl
Expected '244296' to be more than '244296' (context: type eval line 12 cmd {assert_morethan $newlru $oldlru} proc ::test)
```
Our LRU_CLOCK_RESOLUTION value is 1000ms, and default hz is 10, so if the
test is really fast, or the timing is just right, newlru will be the same
as oldlru. We fixed this by changing `after 1000` to `after 1100`.
Test `trim on SET with big value` (introduced from #11817) fails under mac m1 with libc mem_allocator.
The reason is that malloc(33000) will allocate 65536 bytes(>42000).
This test still passes under ubuntu with libc mem_allocator.
```
*** [err]: trim on SET with big value in tests/unit/type/string.tcl
Expected [r memory usage key] < 42000 (context: type source line 471 file /Users/iospack/data/redis_fork/tests/unit/type/string.tcl cmd {assert {[r memory usage key] < 42000}} proc ::test)
```
simple test under mac m1 with libc mem_allocator:
```c
void *p = zmalloc(33000);
printf("malloc size: %zu\n", zmalloc_size(p));
# output
malloc size: 65536
```
This test is very sensitive and fragile. It often fails in Daily,
in most cases, it failed in test-ubuntu-32bit (the AOF loading one),
with the range in (31, 40):
```
[err]: Active defrag in tests/unit/memefficiency.tcl
Expected 38 <= 30 (context: type eval line 113 cmd {assert {$max_latency <= 30}} proc ::test)
```
The AOF loading part isn't tightly fixed to the cron hz. It calls
processEventsWhileBlocked once in every 1024 command calls.
```
/* Serve the clients from time to time */
if (!(loops++ % 1024)) {
off_t progress_delta = ftello(fp) - last_progress_report_size;
loadingIncrProgress(progress_delta);
last_progress_report_size += progress_delta;
processEventsWhileBlocked();
processModuleLoadingProgressEvent(1);
}
```
In this case, we can either decrease the 1024 or increase the
threshold of just the AOF part of that test. Considering the test
machines are sometimes slow, and all sort of quirks could happen
(which do not indicate a bug), and we've already set to 30, we suppose
we can set it a little bit higher, set it to 40. We can have this instead of
adding another testing config (we can add it when we really need it).
Fixes#11868
As `sdsRemoveFreeSpace` have an impact on performance even if it is a no-op (see details at #11508).
Only call the function when there is a possibility that the string contains free space.
* For strings coming from the network, it's only if they're bigger than PROTO_MBULK_BIG_ARG
* For strings coming from scripts, it's only if they're smaller than LUA_CMD_OBJCACHE_MAX_LEN
* For strings coming from modules, it could be anything.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: sundb <sundbcn@gmail.com>
Authenticated users can use string matching commands with a
specially crafted pattern to trigger a denial-of-service attack on Redis,
causing it to hang and consume 100% CPU time.
Co-authored-by: Tom Levy <tomlevy93@gmail.com>
Avoid calling unwatchAllKeys when running touchAllWatchedKeysInDb (which was unnecessary)
This can potentially lead to use-after-free and memory corruption when the next entry
pointer held by the watched keys iterator is freed when unwatching all keys of a specific client.
found with address sanitizer, added a test which will not always fail (depending on the random
dict hashing seed)
problem introduced in #9829 (Reids 7.0)
Co-authored-by: Oran Agra <oran@redislabs.com>
The test sporadically failed with valgrind trying to match
`no client named obuf-client1 found*`
in the log it looks like `obuf-client1` was indeed dropped,
so i'm guessing it's because CLIENT LIST was processed first.
When no-touch mode is enabled, the client will not touch LRU/LFU of the
keys it accesses, except when executing command `TOUCH`.
This allows inspecting or modifying the key-space without affecting their eviction.
Changes:
- A command `CLIENT NO-TOUCH ON|OFF` to switch on and off this mode.
- A client flag `#define CLIENT_NOTOUCH (1ULL<<45)`, which can be shown
with `CLIENT INFO`, by the letter "T" in the "flags" field.
- Clear `NO-TOUCH` flag in `clearClientConnectionState`, which is used by `RESET`
command and resetting temp clients used by modules.
- Also clear `NO-EVICT` flag in `clearClientConnectionState`, this might have been an
oversight, spotted by @madolson.
- A test using `DEBUG OBJECT` command to verify that LRU stat is not touched when
no-touch mode is on.
Co-authored-by: chentianjie <chentianjie@alibaba-inc.com>
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
Co-authored-by: sundb <sundbcn@gmail.com>
We noticed that `client evicted due to client tracking prefixes`
takes over 200 seconds with valgrind.
We combine three prefixes in each command, this will probably
save us half the testing time.
Before: normal: 3508ms, valgrind: 289503ms -> 290s
With three prefixes, normal: 1500ms, valgrind: 135742ms -> 136s
Since we did not actually count the memory usage of all prefixes, see
getClientMemoryUsage, so we can not use larger prefixes to speed up the
test here. Also this PR cleaned up some spaces (IDE jobs) and typos.
There is a built in limit to client side tracking keys, which when exceeded will invalidate keys. This occurs in two places, one in the server cron and other before executing a command. If it happens in the second scenario, the invalidations will be queued for later since current client is set. This queue is never drained if a command is not executed (through call) such as a multi-exec command getting queued. This results in a later server assert crashing.
