Same as the original bind fixes (we just missed these the
first time around).
This helps Redis not automatically send
connections from the first IP on an interface if we are bound
to a specific IP address (e.g. with multiple IP aliases on one
interface, you want to send from _your_ IP, not from the first IP
on the interface).
With the exception of nodes sending MEET packets: we have to trust them
since they can send us MEET packets only when the cluster is initially
created or because sysadmin manual action.
In the cluster evaluation function we are supposed to set the cluster
state as "fail" if we are among a minority, however the code was not
detecting to be into a minority partition if exactly half the masters
were reachable, which is a minority.
- Remove trailing newlines from redis.conf
- Fix comment misspelling
- Clarifies zipEncodeLength usage and a C API mention (#1243, #1242)
- Fix cluster typos (inspired by @papanikge #1507)
- Fix rewite -> rewrite in a few places (inspired by #682)
Closes#1243, #1242, #1507
This fixes a potential bug that was never observed in practice since
what happens is that the asynchronous connect returns ok (to fail later,
calling the handler) every time, so a ping is queued, and sent_ping
happens to always be populated.
Howver technically connect(2) with a non blocking socket may return an
error synchronously, so before this fix the code was not correct.
This commit adds a size check after initial config
line parsing to make sure we have *at least* 8 arguments
per line.
Also, instead of asserting for cluster->myself, we just test
and error out normally (since the error does a hard exit anyway).
Closes#1597
The funciton was also modified in order to be more standalone and
produce an output without trailing spaces, making the reuse simpler.
The global variable was renamed in cammel case as most other Redis
globals, except the main ones we refer too many times, like 'server'.
Replica migration algorithm modified so that slaves never try to migrate
to masters that were never configured to have slaves in the past.
We want the algorithm to take care of masters that remained without
*working* slaves, but that used to have slaves according to the cluster
configuration.
For non-empty masters, CLUSTER RESET is denied, and the user requires to
start to reset a node by explicitly clearing it with FLUSHALL.
However CLUSTER RESET when executed with slaves don't have this
restrictions since data is just a replica of the master, and with
read-only slaves it is also not possible to remove the data set. However
the node was turned from slave to master after a reset, without touching
the old slave data. This is 99.99% of times not appropriate and forces
full resets to follow this path to work with both slave and master
nodes:
FLUSHALL
CLUSTER RESET HARD
FLUSHALL
Since we need the first flushall for masters, and the second for slaves.
This commit changes the behavior so that CLUSTER RESET removes the data set
of a slave node during a reset, in the moment it gets turned into a master,
so the new pattern is simply:
FLUSHALL (that may fail for slaves)
CLUSTER RESET
While we have to output failing masters in order to provide an accurate
map (that may be the one of a Redis Cluster in down state because not
all slots are served by a working master), to provide slaves in FAIL
state is not a good idea since those are not necesarely needed, and the
client will likely incur into a latency penalty trying to connect with a
slave which is down.
Note that this means that CLUSTER SLOTS does not provide a *complete*
map of slaves, however this would not be of any help since slaves may be
added later, and a client that needs to scale reads and requires to
stay updated with the list of slaves, need to do a refresh of the map
from time to time, anyway.
CLUSTER SLOTS returns a Redis-formatted mapping from
slot ranges to IP/Port pairs serving that slot range.
The outer return elements group return values by slot ranges.
The first two entires in each result are the min and max slots for the range.
The third entry in each result is guaranteed to be either
an IP/Port of the master for that slot range - OR - null
if that slot range, for some reason, has no master
The 4th and higher entries in each result are replica instances
for the slot range.
Output comparison:
127.0.0.1:7001> cluster nodes
f853501ec8ae1618df0e0f0e86fd7abcfca36207 127.0.0.1:7001 myself,master - 0 0 2 connected 4096-8191
5a2caa782042187277647661ffc5da739b3e0805 127.0.0.1:7005 slave f853501ec8ae1618df0e0f0e86fd7abcfca36207 0 1402622415859 6 connected
6c70b49813e2ffc9dd4b8ec1e108276566fcf59f 127.0.0.1:7007 slave 26f4729ca0a5a992822667fc16b5220b13368f32 0 1402622415357 8 connected
2bd5a0e3bb7afb2b56a2120d3fef2f2e4333de1d 127.0.0.1:7006 slave 32adf4b8474fdc938189dba00dc8ed60ce635b0f 0 1402622419373 7 connected
5a9450e8279df36ff8e6bb1c139ce4d5268d1390 127.0.0.1:7000 master - 0 1402622418872 1 connected 0-4095
32adf4b8474fdc938189dba00dc8ed60ce635b0f 127.0.0.1:7002 master - 0 1402622419874 3 connected 8192-12287
5db7d05c245267afdfe48c83e7de899348d2bdb6 127.0.0.1:7004 slave 5a9450e8279df36ff8e6bb1c139ce4d5268d1390 0 1402622417867 5 connected
26f4729ca0a5a992822667fc16b5220b13368f32 127.0.0.1:7003 master - 0 1402622420877 4 connected 12288-16383
127.0.0.1:7001> cluster slots
1) 1) (integer) 0
2) (integer) 4095
3) 1) "127.0.0.1"
2) (integer) 7000
4) 1) "127.0.0.1"
2) (integer) 7004
2) 1) (integer) 12288
2) (integer) 16383
3) 1) "127.0.0.1"
2) (integer) 7003
4) 1) "127.0.0.1"
2) (integer) 7007
3) 1) (integer) 4096
2) (integer) 8191
3) 1) "127.0.0.1"
2) (integer) 7001
4) 1) "127.0.0.1"
2) (integer) 7005
4) 1) (integer) 8192
2) (integer) 12287
3) 1) "127.0.0.1"
2) (integer) 7002
4) 1) "127.0.0.1"
2) (integer) 7006
Instead of having an hardcoded IP address in the node configuration, we
autodiscover it via MEET messages for automatic update when the node is
restarted with a different IP address.
This mechanism was discussed in the context of PR #1782.
Since there are ways to alter the configEpoch outside of the failover
procedure (for exampel CLUSTER SET-CONFIG-EPOCH and via the configEpoch
collision resolution algorithm), make always sure, before replacing our
configEpoch with a new one, that it is greater than the current one.
SET-CONFIG-EPOCH, used by redis-trib at cluster creation time, failed to
update the currentEpoch, making it possible after a failover for a
server to set its configEpoch to a value smaller than the current one
(since configEpochs are obtained using currentEpoch).
The bug totally break the Redis Cluster algorithms and protocols
allowing for permanent split brain conditions about the slots
configuration as shown in issue #1799.
There is a time defined by REDIS_CLUSTER_WRITABLE_DELAY where fail -> ok
switch is not possible after startup as a master for some time, however
the contrary (ok -> fail) should always be possible.
Thanks to this change, when there is some code like:
clusterDoBeforeSleep(CLUSTER_TODO_UPDATE_STATE|...);
... and later before returning to the event loop ...
clusterUpdateState();
The clusterUpdateState() function will clar the flag and will not be
repeated in the clusterBeforeSleep() function. This especially important
for config save/fsync flags which are slow to execute and not a good
idea to repeat without a good reason.
This is implemented for all the CLUSTER_TODO flags.
The new command is able to reset a cluster node so that it starts again
as a fresh node. By default the command performs a soft reset (the same
as calling it as CLUSTER RESET SOFT), and the following steps are
performed:
1) All slots are set as unassigned.
2) The list of known nodes is flushed.
3) Node is set as master if it is a slave.
When an hard reset is performed with CLUSTER RESET HARD the following
additional operations are performed:
4) A new Node ID is created at random.
5) Epochs are set to 0.
CLUSTER RESET is useful both when the sysadmin wants to reconfigure a
node with a different role (for example turning a slave into a master)
and for testing purposes.
It also may play a role in automatically provisioned Redis Clusters,
since it allows to reset a node back to the initial state in order to be
reconfigured.
The previous code handling a lost slot (by another master with an higher
configuration for the slot) was defensive, considering it an error and
putting the cluster in an odd state requiring redis-cli fix.
This was changed, because actually this only happens either in a
legitimate way, with failovers, or when the admin messed with the config
in order to reconfigure the cluster. So the new code instead will try to
make sure that the keys stored match the new slots map, by removing all
the keys in the slots we lost ownership from.
The function that deletes the keys from the lost slots is called only
if the node does not lose all its slots (resulting in a reconfiguration
as a slave of the node that got ownership). This is an optimization
since the replication code will anyway flush all the instance data in
a faster way.
Using CLUSTER FAILOVER FORCE it is now possible to failover a master in
a forced way, which means:
1) No check to understand if the master is up is performed.
2) No data age of the slave is checked. Evan a slave with very old data
can manually failover a master in this way.
3) No chat with the master is attempted to reach its replication offset:
the master can just be down.
Automatic failovers only happen in Redis Cluster if the slave trying to
be elected was disconnected from its master for no more than 10 times
the node-timeout value. However there should be no such a check for
manual failovers, since these are initiated by the sysadmin that, in
theory, knows what she is doing when a slave is selected to be promoted.
The error when the target key is busy was a generic one, while it makes
sense to be able to distinguish between the target key busy error and
the others easily.
The same change was operated for normal client connections. This is
important for Cluster as well, since when a node rejoins the cluster,
when a partition heals or after a restart, it gets flooded with new
connection attempts by all the other nodes trying to form a full
mesh again.
Initially Redis Cluster accepted that after cluster creation all the
nodes were at configEpoch 0, evolving from zero as failovers happen.
However later the semantic was made more strict in order to make sure a
cluster has always all the master nodes with a different configEpoch,
which is more robust in some corner case (especially resulting from
errors by the system administrator).
To assign different configEpochs to different nodes at startup was a
task performed naturally by the config conflicts resolution algorithm
(see the Cluster specification). However this works well only for small
clusters or when there are actually just a few collisions, since it is
designed for exceptional cases.
When a large cluster is created hundred of nodes can be at epoch 0, so
the conflict resolution code is slow to provide an unique config to each
node. For this reason this new command was introduced. It can be called
only when a node is totally fresh: no other nodes known, and configEpoch
set to zero, so it is safe even against misuses.
redis-trib will use the new command in order to start the cluster
already setting an incremental unique config to every node.
