* Specifying an empty `bind ""` configuration prevents Redis from listening on any TCP port. Before this commit, such configuration was not accepted.
* Using `CONFIG GET bind` will always return an explicit configuration value. Before this commit, if a bind address was not specified the returned value was empty (which was an anomaly).
Another behavior change is that modifying the `bind` configuration to a non-default value will NO LONGER DISABLE protected-mode implicitly.
Previously, passing 0 for newlen would not truncate the string at all.
This adds handling of this case, freeing the old string and creating a new empty string.
Other changes:
- Move `src/modules/testmodule.c` to `tests/modules/basics.c`
- Introduce that basic test into the test suite
- Add tests to cover StringTruncate
- Add `test-modules` build target for the main makefile
- Extend `distclean` build target to clean modules too
# replication-3.tcl
had a test timeout failure with valgrind on daily CI:
```
*** [err]: SLAVE can reload "lua" AUX RDB fields of duplicated scripts in tests/integration/replication-3.tcl
Replication not started.
```
replication took more than 70 seconds.
https://github.com/redis/redis/runs/2854037905?check_suite_focus=true
on my machine it takes only about 30, but i can see how 50 seconds isn't enough.
# replication.tcl
loading was over too quickly in freebsd daily CI:
```
*** [err]: slave fails full sync and diskless load swapdb recovers it in tests/integration/replication.tcl
Expected '0' to be equal to '1' (context: type eval line 44 cmd {assert_equal [s -1 loading] 1} proc ::start_server)
```
# rdb.tcl
loading was over too quickly.
increase the time loading takes, and decrease the amount of work we try to achieve in that time.
The `Tracking gets notification of expired keys` test in tracking.tcl
used to hung in valgrind CI quite a lot.
It turns out the reason is that with valgrind and a busy machine, the
server cron active expire cycle could easily run in the same event loop
as the command that created `mykey`, so that when they key got expired,
there were two change events to broadcast, one that set the key and one
that expired it, but since we used raxTryInsert, the client that was
associated with the "last" change was the one that created the key, so
the NOLOOP filtered that event.
This commit adds a test that reproduces the problem by using lazy expire
in a multi-exec which makes sure the key expires in the same event loop
as the one that added it.
Fixes#6792. Added support of REDIS_REPLY_SET in raw and csv output of `./redis-cli`
Test:
run commands to test:
./redis-cli -3 --csv COMMAND
./redis-cli -3 --raw COMMAND
Now they are returning resuts, were failing with: "Unknown reply type: 10" before the change.
Open the log file only after parsing the entire config file, so that it's
location isn't dependent on the order of configs (`dir` and `logfile`).
Also solves the problem of creating multiple log files if the `logfile`
directive appears many times in the config file.
cleanups:
1: Re-introduce debug leak subcommand in help text.
Mistankenly deleted in https://github.com/redis/redis/pull/5531
2: Formatted the text.
Some text lacks commas resulting in no line breaks.
3: Supplementary debug restart command descriptions of delay arg.
Due to the change in #9003, a long-standing bug was raised under `valgrind`.
This bug can cause the master-slave sync to take a very long time, causing the `pendingquerybuf.tcl` test to fail.
This problem does not only occur in master-slave sync, it is triggered when the big arg is greater than 32k.
step:
```sh
dd if=/dev/zero of=bigfile bs=1M count=32
./src/redis-cli -x hset a a < bigfile
```
1) Make room for querybuf in processMultibulkBuffer, now the alloc of querybuf will be more than 32k.
2) If this happens to trigger the `clientsCronResizeQueryBuffer`, querybuf will be resized to 0.
3) Finally, in readQueryFromClient, we expand the querybuf non-greedily, from 0 to 32k.
Old code, make room for querybuf is greedy, so it only needs 11 times to expand to 32M(16k*(2^11)),
but now we need 2048(32*1024/16) times to reach it, due to the slow allocation under valgrind that exposed the problem.
The fix for the excessive shrinking of the query buf to 0, will be handled in #5013 (that other change on it's own can fix failing test too), but the fix in this PR will also fix the failing test.
The fix in this PR will makes the reading in `readQueryFromClient` more aggressive when working on a big arg (so that it is in par with the same code in `processMultibulkBuffer` (i.e. the two calls to `sdsMakeRoomForNonGreedy` should both use the bulk size).
In the code before this fix the one in readQueryFromClient always has `readlen = PROTO_IOBUF_LEN`
This commit improve MEMORY USAGE command to include internal fragmentation overheads of:
1. EMBSTR encoded strings
2. ziplist encoded zsets and hashes
3. List type nodes
Fix test failure which introduced by #9003.
The following case will occur when querybuf expansion will allocate memory equal to (16*1024)k.
1) make use ```CFLAGS=-DNO_MALLOC_USABLE_SIZE```.
2) ```malloc``` will not allocate more under ```alpine```.
This will allow distros to use an "include conf.d/*.conf" statement in the default configuration file
which will facilitate customization across upgrades/downgrades.
The change itself is trivial: instead of opening an individual file, the glob call creates a vector of files to open, and each file is opened in turn, and its content is added to the configuration.
Gopher support was added mainly because it was simple (trivial to add).
But apparently even something that was trivial at the time, does cause complications
down the line when adding more features.
We recently ran into a few issues with io-threads conflicting with the gopher support.
We had to either complicate the code further in order to solve them, or drop gopher.
AFAIK it's completely unused, so we wanna chuck it, rather than keep supporting it.
Create new module type enhanced callbacks: mem_usage2, free_effort2, unlink2, copy2.
These will be given a context point from which the module can obtain the key name and database id.
In addition the digest and defrag context can now be used to obtain the key name and database id.
When using RESP3, ZPOPMAX/ZPOPMIN should return nested arrays for consistency
with other commands (e.g. ZRANGE).
We do that only when COUNT argument is present (similarly to how LPOP behaves).
for reasoning see https://github.com/redis/redis/issues/8824#issuecomment-855427955
This is a breaking change only when RESP3 is used, and COUNT argument is present!
* Cleaning up the cluster interface by moving almost all related declarations into cluster.h
(no logic change -- just moving declarations/definitions around)
This initial effort leaves two items out of scope - the configuration parsing into the server
struct and the internals exposed by the clusterNode struct.
* Remove unneeded declarations of dictSds*
Ideally all the dictSds functionality would move from server.c into a dedicated module
so we can avoid the duplication in redis-benchmark/cli
* Move crc16 back into server.h, will be moved out once we create a seperate header file for
hashing functions
The initialize memory of `querybuf` is `PROTO_IOBUF_LEN(1024*16) * 2` (due to sdsMakeRoomFor being greedy), under `jemalloc`, the allocated memory will be 40k.
This will most likely result in the `querybuf` being resized when call `clientsCronResizeQueryBuffer` unless the client requests it fast enough.
Note that this bug existed even before #7875, since the condition for resizing includes the sds headers (32k+6).
## Changes
1. Use non-greedy sdsMakeRoomFor when allocating the initial query buffer (of 16k).
1. Also use non-greedy allocation when working with BIG_ARG (we won't use that extra space anyway)
2. in case we did use a greedy allocation, read as much as we can into the buffer we got (including internal frag), to reduce system calls.
3. introduce a dedicated constant for the shrinking (same value as before)
3. Add test for querybuf.
4. improve a maxmemory test by ignoring the effect of replica query buffers (can accumulate many ACKs on slow env)
5. improve a maxmemory by disabling slowlog (it will cause slight memory growth on slow env).
Do not queue command in an already aborted MULTI state.
We can detect an error (watched key).
So in queueMultiCommand, we also can return early.
Like we deal with `CLIENT_DIRTY_EXEC`.
Fix crash when using io-threads-do-reads and issuing CLIENT PAUSE and
CLIENT UNPAUSE.
This issue was introduced in redis 6.2 together with the FAILOVER command.
Today when we load the AOF on startup, the loadAppendOnlyFile checks if
the file is openning for reading.
This check is redundent (dead code) as we open the AOF file for writing at initServer,
and the file will always be existing for the loadAppendOnlyFile.
In this commit:
- remove all the exit(1) from loadAppendOnlyFile, as it is the caller
responsibility to decide what to do in case of failure.
- move the opening of the AOF file for writing, to be after we loading it.
- avoid return -ERR in DEBUG LOADAOF, when the AOF is existing but empty
SINTERSTORE would have deleted the dest key right away,
even when later on it is bound to fail on an (WRONGTYPE) error.
With this change it first picks up all the input keys, and only later
delete the dest key if one is empty.
Also add more tests for some commands.
Mainly focus on
- `wrong type error`:
expand test case (base on sinter bug) in non-store variant
add tests for store variant (although it exists in non-store variant, i think it would be better to have same tests)
- the dstkey result when we meet `non-exist key (empty set)` in *store
sdiff:
- improve test case about wrong type error (the one we found in sinter, although it is safe in sdiff)
- add test about using non-exist key (treat it like an empty set)
sdiffstore:
- according to sdiff test case, also add some tests about `wrong type error` and `non-exist key`
- the different is that in sdiffstore, we will consider the `dstkey` result
sunion/sunionstore add more tests (same as above)
sinter/sinterstore also same as above ...
The root cause is that one test (`5 keys in, 5 keys out`) is leaking a volatile key
that can expire while another later test(`All TTL in commands are propagated
as absolute timestamp in replication stream`) is running.
Such leaked expiration injects an unexpected `DEL` command into the
replication command during the later test, causing it to fail.
The fixes are two fold:
1. Plug the leak in the first test.
2. Add FLUSHALL to the later test, to avoid future interference from other tests.
This PR adds a spell checker CI action that will fail future PRs if they introduce typos and spelling mistakes.
This spell checker is based on blacklist of common spelling mistakes, so it will not catch everything,
but at least it is also unlikely to cause false positives.
Besides that, the PR also fixes many spelling mistakes and types, not all are a result of the spell checker we use.
Here's a summary of other changes:
1. Scanned the entire source code and fixes all sorts of typos and spelling mistakes (including missing or extra spaces).
2. Outdated function / variable / argument names in comments
3. Fix outdated keyspace masks error log when we check `config.notify-keyspace-events` in loadServerConfigFromString.
4. Trim the white space at the end of line in `module.c`. Check: https://github.com/redis/redis/pull/7751
5. Some outdated https link URLs.
6. Fix some outdated comment. Such as:
- In README: about the rdb, we used to said create a `thread`, change to `process`
- dbRandomKey function coment (about the dictGetRandomKey, change to dictGetFairRandomKey)
- notifyKeyspaceEvent fucntion comment (add type arg)
- Some others minor fix in comment (Most of them are incorrectly quoted by variable names)
7. Modified the error log so that users can easily distinguish between TCP and TLS in `changeBindAddr`
This commit revives the improves the ability to run the test suite against
external servers, instead of launching and managing `redis-server` processes as
part of the test fixture.
This capability existed in the past, using the `--host` and `--port` options.
However, it was quite limited and mostly useful when running a specific tests.
Attempting to run larger chunks of the test suite experienced many issues:
* Many tests depend on being able to start and control `redis-server` themselves,
and there's no clear distinction between external server compatible and other
tests.
* Cluster mode is not supported (resulting with `CROSSSLOT` errors).
This PR cleans up many things and makes it possible to run the entire test suite
against an external server. It also provides more fine grained controls to
handle cases where the external server supports a subset of the Redis commands,
limited number of databases, cluster mode, etc.
The tests directory now contains a `README.md` file that describes how this
works.
This commit also includes additional cleanups and fixes:
* Tests can now be tagged.
* Tag-based selection is now unified across `start_server`, `tags` and `test`.
* More information is provided about skipped or ignored tests.
* Repeated patterns in tests have been extracted to common procedures, both at a
global level and on a per-test file basis.
* Cleaned up some cases where test setup was based on a previous test executing
(a major anti-pattern that repeats itself in many places).
* Cleaned up some cases where test teardown was not part of a test (in the
future we should have dedicated teardown code that executes even when tests
fail).
* Fixed some tests that were flaky running on external servers.
When we allocate a client struct with 16k reply buffer, the allocator we may give us 20K,
This commit makes use of that extra space.
Additionally, it tries to store whatever it can from the reply into the static 'buf' before
allocating a new node for the reply list.
redis-cli is grep friendly for all commands but SUBSCRIBE/PSUBSCRIBE.
it is unable to process output from these commands line by line piped
to another program because of output buffering. to overcome this
situation I propose to flush stdout each time when it is written with
reply from these commands the same way it is already done for all other
commands.
* clusterManagerAddSlots check argv_idx error.
* clusterManagerLoadInfoFromNode remove unused param opts.
* redis-cli node->ip may be an sds or a c string. Using %s to format
is always right, %S may be wrong.
* In clusterManagerFixOpenSlot clusterManagerBumpEpoch call is redundant,
because it is already called in clusterManagerSetSlotOwner.
* redis-cli cluster help add more commands in help messages.
Till now GET and NX were mutually exclusive.
This change make their combination mean a "Get or Set" command.
If the key exists it returns the old value and avoids setting,
and if it does't exist it returns nil and sets it to the new value (possibly with expiry time)
The decision to stop trimming due to LIMIT in XADD and XTRIM was after the limit was reached.
i.e. the code was deleting **at least** that count of records (from the LIMIT argument's perspective, not the MAXLEN),
instead of **up to** that count of records.
see #9046
running the "geo" unit would have shown that it completed a unit named
"north". this was because the variable `$name` was overwritten.
This commit isn't perfect, but it slightly reduces the chance for
variable name clash.
```
$ ./runtest --single unit/geo
.......
Testing unit/geo
.......
[1/1 done]: north (15 seconds)
```
