When replica never successfully connect to master, server.repl_down_since
will be initialized to 0, therefore, the info master_link_down_since_seconds
was showing the current unix timestamp, which does not make much sense.
This commit fixes the issue by showing master_link_down_since_seconds to -1.
means the replica never connect to master before.
This commit also resets this variable back to 0 when a replica is turned into
a master, so that it'll behave the same if the master is later turned into a
replica again.
The implication of this change is that if some app is checking if the value is > 60
do something, like conclude the replica is stale, this could case harm (changing
a big positive number with a small one).
Starting redis 6.0 (part of the TLS feature), diskless master uses pipe from the fork
child so that the parent is the one sending data to the replicas.
This mechanism has an issue in which a hung replica will cause the master to wait
for it to read the data sent to it forever, thus preventing the fork child from terminating
and preventing the creations of any other forks.
This PR adds a timeout mechanism, much like the ACK-based timeout,
we disconnect replicas that aren't reading the RDB file fast enough.
* Modules API docs: Link API function names to their definitions
Occurrences of API functions are linked to their definition.
A function index with links to all functions is added on the bottom
of the page.
Comment blocks in module.c starting with a markdown h2 heading are
used as sections. A table of contents is generated from these
headings.
The functions names are changed from h2 to h3, since they are now
rendered as sub-headings within each section.
Existing sections in module.c are used with some minor changes.
Some documentation text is added or sligtly modified.
The markdown renderer will add IDs which may clash with our
generated IDs. By prefixing section IDs with "section-" we make
them different.
Replace double dashes with a unicode long ndash
In a code example, using RedisModule_FreeString instead of
RedisModule_Free makes it behave correctly regardless of whether
automatic memory is used or not.
server.client_pause_end_time is uninitialized, or actually 0, at startup,
which means this method would think the timeout was reached
and go look for paused clients.
This causes no harm since unpauseClients will not find any paused clients.
The code used to decide on the next time to wake on a timer with
microsecond accuracy, but when deciding to go to sleep it used
milliseconds accuracy (with truncation), this means that it would wake
up too early, see that there's no timer to process, and go to sleep
again for 0ms again and again until the right microsecond arrived.
i.e. a timer for 100ms, would sleep for 99ms, but then do a busy loop
through the kernel in the last millisecond, triggering many calls to
beforeSleep.
The fix is to change all the logic in ae.c to work with microseconds,
which is good since most of the ae backends support micro (or even nano)
seconds. however the epoll backend, doesn't support micro, so to avoid
this problem it needs to round upwards, rather than truncate.
Issue created by the monotonic timer PR #7644 (redis 6.2)
Before that, all the timers in ae.c were in milliseconds (using
mstime), so when it requested the backend to sleep till the next timer
event, it would have worked ok.
The bio aof fsync fd may be closed by main thread (AOFRW done handler)
and even possibly reused for another socket, pipe, or file.
This can can an EBADF or EINVAL fsync error, which will lead to -MISCONF errors failing all writes.
We just ignore these errno because aof fsync did not really fail.
We handle errno when fsyncing aof in bio, so we could know the real reason
when users get -MISCONF Errors writing to the AOF file error
Issue created with #8419
Fix out of range error messages to be clearer (avoid mentioning 9223372036854775807)
* Fix XAUTOCLAIM COUNT option confusing error msg
* Fix other RPOP and alike error message to mention positive
With this fix, module data type registration will fail if the load or save callbacks are not defined, or the optional aux load and save callbacks are not either both defined or both missing.
Background:
Redis 6.2 added ACL control for pubsub channels (#7993), which were supposed
to be permissive by default to retain compatibility with redis 6.0 ACL.
But due to a bug, only newly created users got this `acl-pubsub-default` applied,
while overwritten (updated) users got reset to `resetchannels` (denied).
Since the "default" user exists before loading the config file,
any ACL change to it, results in an update / overwrite.
So when a "default" user is loaded from config file or include ACL
file with no channels related rules, the user will not have any
permissions to any channels. But other users will have default
permissions to any channels.
When upgraded from 6.0 with config rewrite, this will lead to
"default" user channels permissions lost.
When users are loaded from include file, then call "acl load", users
will also lost channels permissions.
Similarly, the `reset` ACL rule, would have reset the user to be denied
access to any channels, ignoring `acl-pubsub-default` and breaking
compatibility with redis 6.0.
The implication of this fix is that it regains compatibility with redis 6.0,
but breaks compatibility with redis 6.2.0 and 2.0.1. e.g. after the upgrade,
the default user will regain access to pubsub channels.
Other changes:
Additionally this commit rename server.acl_pubusub_default to
server.acl_pubsub_default and fix typo in acl tests.
Previously (and by default after commit) when master loose its last slot
(due to migration, for example), its replicas will migrate to new last slot
holder.
There are cases where this is not desired:
* Consolidation that results with removed nodes (including the replica, eventually).
* Manually configured cluster topologies, which the admin wishes to preserve.
Needlessly migrating a replica triggers a full synchronization and can have a negative impact, so
we prefer to be able to avoid it where possible.
This commit adds 'cluster-allow-replica-migration' configuration option that is
enabled by default to preserve existed behavior. When disabled, replicas will
not be auto-migrated.
Fixes#4896
Co-authored-by: Oran Agra <oran@redislabs.com>
In `aof.c`, we call fsync when stop aof, and now print a log to let user know that if fail.
In `cluster.c`, we now return error, the calling function already handles these write errors.
In `redis-cli.c`, users hope to save rdb, we now print a message if fsync failed.
In `rio.c`, we now treat fsync errors like we do for write errors.
In `server.c`, we try to fsync aof file when shutdown redis, we only can print one log if fail.
In `bio.c`, if failing to fsync aof file, we will set `aof_bio_fsync_status` to error , and reject writing just like last writing aof error, moreover also set INFO command field `aof_last_write_status` to error.
This command used to return the last scanned entry id as the cursor,
instead of the next one to be scanned.
so in the next call, the user could / should have sent `(cursor` and not
just `cursor` if he wanted to avoid scanning the same record twice.
Scanning the record twice would look odd if someone is checking what
exactly was scanned, but it also has a side effect of incrementing the
delivery count twice.
If GT/LT fails the operation we need to reply with
nill (like failure due to NX).
Other changes:
Add the missing $encoding suffix to many zset tests
Note: there's a behavior change just in case of INCR + GT/LT that fails.
The old code was replying with the wrong (rejected) score, and now it'll reply with nil.
Note that that's anyway a corner case so this "behavior change" shouldn't have too much affect.
Using GT/LT with INCR has a predictable result even before we run the command
(INCR GT will only only / always fail if the increment is negative).
The implications of this change is just that in the past when a config file was missing,
in some cases it was exiting before printing the sever startup prints and sometimes after,
and now it'll always exit before printing them.
There are 2 common range comparators for skiplist: zslValueGteMin and
zslValueLteMax, but they're not being reused in zslDeleteRangeByScore
This is a small change to make code cleaner.
this is a followup PR for #8699
instead of copying the deferred reply data to the previous node only if it has room for the entire thing,
we can now split the new payload, put part of it into the spare space in the prev node,
and the rest may fit into the next node.
The 'sentinel replicas <master>' command will ignore replicas with
`replica-announced` set to no.
The goal of disabling the config setting replica-announced is to allow ghost
replicas. The replica is in the cluster, synchronize with its master, can be
promoted to master and is not exposed to sentinel clients. This way, it is
acting as a live backup or living ghost.
In addition, to prevent the replica to be promoted as master, set
replica-priority to 0.
The cluster bus is established over TLS or non-TLS depending on the configuration tls-cluster. The client ports distributed in the cluster and sent to clients are assumed to be TLS or non-TLS also depending on tls-cluster.
The cluster bus is now extended to also contain the non-TLS port of clients in a TLS cluster, when available. The non-TLS port of a cluster node, when available, is sent to clients connected without TLS in responses to CLUSTER SLOTS, CLUSTER NODES, CLUSTER SLAVES and MOVED and ASK redirects, instead of the TLS port.
The user was able to override the client port by defining cluster-announce-port. Now cluster-announce-tls-port is added, so the user can define an alternative announce port for both TLS and non-TLS clients.
Fixes#8134
the bug was also discussed in #8716, and was solved in #8719, but incompletely:
when the server is started, and the save option is default, if you issue the " config set save "" "
to change the save option, and then issue the “config rewrite” command, the " save "" " won't be saved.
'processCommandAndResetClient' returns 1 if client is dead. It does it
by checking if serve.current_client is NULL. On script timeout, Redis will re-enter
'processCommandAndResetClient' and when finish we will set server.current_client
to NULL. This will cause later to falsely return 1 and think that the client that
sent the timed-out script is dead (Redis to stop reading from the client buffer).
In activeDefragSdsListAndDict when defrag list key sucess, the key
in dict is also replaced. Then the corresponding dictEntry is
defraged. But the dictEntry will be defraged in next step by defrag
the dict values too.
Add publish channel permissions check in processCommand.
processCommand didn't check publish channel permissions, so we can
queue a publish command in a transaction. But when exec the transaction,
it will fail with -NOPERM.
We also union keys/commands/channels permissions check togegher in
ACLCheckAllPerm. Remove pubsubCheckACLPermissionsOrReply in
publishCommand/subscribeCommand/psubscribeCommand. Always
check permissions in processCommand/execCommand/
luaRedisGenericCommand.
* SLOWLOG didn't record anything for blocked commands because the client
was reset and argv was already empty. there was a fix for this issue
specifically for modules, now it works for all blocked clients.
* The original command argv (before being re-written) was also reset
before adding the slowlog on behalf of the blocked command.
* Latency monitor is now updated regardless of the slowlog flags of the
command or its execution (their purpose is to hide sensitive info from
the slowlog, not hide the fact the latency happened).
* Latency monitor now uses real_cmd rather than c->cmd (which may be
different if the command got re-written, e.g. GEOADD)
Changes:
* Unify shared code between slowlog insertion in call() and
updateStatsOnUnblock(), hopefully prevent future bugs from happening
due to the later being overlooked.
* Reset CLIENT_PREVENT_LOGGING in resetClient rather than after command
processing.
* Add a test for SLOWLOG and BLPOP
Notes:
- real_cmd == c->lastcmd, except inside MULTI and Lua.
- blocked commands never happen in these cases (MULTI / Lua)
- real_cmd == c->cmd, except for when the command is rewritten (e.g.
GEOADD)
- blocked commands (currently) are never rewritten
- other than the command's CLIENT_PREVENT_LOGGING, and the
execution flag CLIENT_PREVENT_LOGGING, other cases that we want to
avoid slowlog are on AOF loading (specifically CMD_CALL_SLOWLOG will
be off when executed from execCommand that runs from an AOF)
the corrupt-dump-fuzzer test found a case where an access to a corrupt
stream would have caused accessing to uninitialized memory.
now it'll panic instead.
The issue was that there was a stream that says it has more than 0
records, but looking for the max ID came back empty handed.
p.s. when sanitize-dump-payload is used, this corruption is detected,
and the RESTORE command is gracefully rejected.
We sometimes see the crash report saying we were killed by a random
process even in cases where the crash was spontanius in redis.
for instance, crashes found by the corrupt-dump test.
It looks like this si_pid is sometimes left uninitialized, and a good
way to tell if the crash originated in redis or trigged by outside is to
look at si_code, real signal codes are always > 0, and ones generated by
kill are have si_code of 0 or below.
Reading CoW from /proc/<pid>/smaps can be slow with large processes on
some platforms.
This measures the time it takes to read CoW info and limits the duty
cycle of future updates to roughly 1/100.
As current_cow_size no longer represnets a current, fixed interval value
there is also a new current_cow_size_age field that provides information
about the age of the size value, in seconds.
pcall function runs another LUA function in protected mode, this means
that any error will be caught by this function and will not stop the LUA
execution. The script kill mechanism uses error to stop the running script.
Scripts that uses pcall can catch the error raise by the script kill mechanism,
this will cause a script like this to be unkillable:
local f = function()
while 1 do
redis.call('ping')
end
end
while 1 do
pcall(f)
end
The fix is, when we want to kill the script, we set the hook function to be invoked
after each line. This will promise that the execution will get another
error before it is able to enter the pcall function again.
Some operating systems (e.g., NetBSD and OpenBSD) have switched to
using a 64-bit integer for time_t on all platforms. This results in currently
harmless compiler warnings due to potential truncation.
These changes fix these minor portability concerns.
* Fix format string for systems with 64 bit time
* use llabs to avoid truncation with 64 bit time
In the long term we may want to move away from anet completely and have
everything implemented natively in connection.c, instead of having an
extra layer.
For now, just get rid of unused code.
In certain scenario start_server may think it failed to start a redis server
although it started successfully. in these cases, it'll not terminate it, and
it'll remain running when the test is over.
In start_server if config doesn't have bind (the minimal.conf in introspection.tcl),
it will try to bind ipv4 and ipv6. One may success while other fails. It will
output "Could not create server TCP listening socket".
wait_server_started uses this message to check whether instance started
successfully. So it will consider that it failed even though redis started successfully.
Additionally, in some cases it wasn't clear to users why the server exited,
since the warning message printed to the log, could in some cases be harmless,
and in some cases fatal.
This PR adds makes a clear distinction between a warning log message and
a fatal one, and changes the test suite to look for the fatal message.
lookupKeyReadOrReply and lookupKeyWriteOrReply might decide to reply to the user
with the given robj reply. This reply might be an error reply and if so addReply
function is used instead of addReplyErrorObject which will cause the error reply not
to be counted on stats. The fix checks the first char in the reply and if its '-' (error)
it uses addReplyErrorObject.
REDISMODULE_CTX_FLAGS_EVICT and REDISMODULE_CTX_FLAGS_MAXMEMORY
shouldn't be set when the module is run inside a replica that doesn't do eviction.
one may argue that the database is under eviction (the master does eviction and sends DELs to the replica).
but on the other hand, we don't really know the master's configuration.
all that matters is if the current instance does evictions or not.
listenToPort attempts to gracefully handle and ignore certain errors but does not store errno prior to logging, which in turn calls several libc functions that may overwrite errno.
This has been discovered due to libmusl strftime() always returning with errno set to EINVAL, which resulted with docker-library/redis#273.
1. moduleReplicateMultiIfNeeded should use server.in_eval like
moduleHandlePropagationAfterCommandCallback
2. server.in_eval could have been set to 1 and not reset back
to 0 (a lot of missed early-exits after in_eval is already 1)
Note: The new assertions in processCommand cover (2) and I added
two module tests to cover (1)
Implications:
If an EVAL that failed (and thus left server.in_eval=1) runs before a module
command that replicates, the replication stream will contain MULTI (because
moduleReplicateMultiIfNeeded used to check server.lua_caller which is NULL
at this point) but not EXEC (because server.in_eval==1)
This only affects modules as module.c the only user of server.in_eval.
Affects versions 6.2.0, 6.2.1
On a replica we do accept connections, even though commands accessing
the database will operate in read-only mode. But the server is still
already operational and processing commands.
Not sending the readiness notification means that on a HA setup where
the nodes all start as replicas (with replicaof in the config) with
a replica that cannot connect to the master server and which might not
come back in a predictable amount of time or at all, the service
supervisor will end up timing out the service and terminating it, with
no option to promote it to be the main instance. This seems counter to
what the readiness notification is supposed to be signaling.
Instead send the readiness notification when we start accepting
commands, and then send the various server status changes as that.
Fixes: commit 641c64ada1
Fixes: commit dfb598cf33
Bug 1:
When a module ctx is freed moduleHandlePropagationAfterCommandCallback
is called and handles propagation. We want to prevent it from propagating
commands that were not replicated by the same context. Example:
1. module1.foo does: RM_Replicate(cmd1); RM_Call(cmd2); RM_Replicate(cmd3)
2. RM_Replicate(cmd1) propagates MULTI and adds cmd1 to also_propagagte
3. RM_Call(cmd2) create a new ctx, calls call() and destroys the ctx.
4. moduleHandlePropagationAfterCommandCallback is called, calling
alsoPropagates EXEC (Note: EXEC is still not written to socket),
setting server.in_trnsaction = 0
5. RM_Replicate(cmd3) is called, propagagting yet another MULTI (now
we have nested MULTI calls, which is no good) and then cmd3
We must prevent RM_Call(cmd2) from resetting server.in_transaction.
REDISMODULE_CTX_MULTI_EMITTED was revived for that purpose.
Bug 2:
Fix issues with nested RM_Call where some have '!' and some don't.
Example:
1. module1.foo does RM_Call of module2.bar without replication (i.e. no '!')
2. module2.bar internally calls RM_Call of INCR with '!'
3. at the end of module1.foo we call RM_ReplicateVerbatim
We want the replica/AOF to see only module1.foo and not the INCR from module2.bar
Introduced a global replication_allowed flag inside RM_Call to determine
whether we need to replicate or not (even if '!' was specified)
Other changes:
Split beforePropagateMultiOrExec to beforePropagateMulti afterPropagateExec
just for better readability
Have a clear separation between in and out flags
Other changes:
delete dead code in RM_ZsetIncrby: if zsetAdd returned error (happens only if
the result of the operation is NAN or if score is NAN) we return immediately so
there is no way that zsetAdd succeeded and returned NAN in the out-flags
`master_sync_perc` and `loading_loaded_perc` don't have that sign,
and i think the info field should be a raw floating point number (the name suggests its units).
we already have `used_memory_peak_perc` and `used_memory_dataset_perc` which do add the `%` sign, but:
1) i think it was a mistake but maybe too late to fix now, and maybe not too late to fix for `current_fork_perc`
2) it is more important to be consistent with the two other "progress" "prec" metrics, and not with the "utilization" metric.
1. Add `redis-server test all` support to run all tests.
2. Add redis test to daily ci.
3. Add `--accurate` option to run slow tests for more iterations (so that
by default we run less cycles (shorter time, and less prints).
4. Move dict benchmark to REDIS_TEST.
5. fix some leaks in tests
6. make quicklist tests run on a specific fill set of options rather than huge ranges
7. move some prints in quicklist test outside their loops to reduce prints
8. removing sds.h from dict.c since it is now used in both redis-server and
redis-cli (uses hiredis sds)
The obtained process_rss was incorrect (the OS reports pages, not
bytes), resulting with many other fields getting corrupted.
This has been tested on FreeBSD but not other platforms.
When a quicklist has quicklist->compress * 2 nodes, then call
__quicklistCompress, all nodes will be decompressed and the middle
two nodes will be recompressed again. This violates the fact that
quicklist->compress * 2 nodes are uncompressed. It's harmless
because when visit a node, we always try to uncompress node first.
This only happened when a quicklist has quicklist->compress * 2 + 1
nodes, then delete a node. For other scenarios like insert node and
iterate this will not happen.
Scenario:
1. A module client is blocked on keys with a timeout
2. Shortly before the timeout expires, the key is being populated and signaled
as ready
3. Redis calls moduleTryServeClientBlockedOnKey (which replies to client) and
then moduleUnblockClient
4. moduleUnblockClient doesn't really unblock the client, it writes to
server.module_blocked_pipe and only marks the BC as unblocked.
5. beforeSleep kics in, by this time the client still exists and techincally
timed-out. beforeSleep replies to the timeout client (double reply) and
only then moduleHandleBlockedClients is called, reading from module_blocked_pipe
and calling unblockClient
The solution is similar to what was done in moduleTryServeClientBlockedOnKey: we
should avoid re-processing an already-unblocked client
* The `redis-cli --scan` output should honor output mode (set explicitly or implicitly), and quote key names when not in raw mode.
* Technically this is a breaking change, but it should be very minor since raw mode is by default on for non-tty output.
* It should only affect TTY output (human users) or non-tty output if `--no-raw` is specified.
* Added `--quoted-input` option to treat all arguments as potentially quoted strings.
* Added `--quoted-pattern` option to accept a potentially quoted pattern.
Unquoting is applied to potentially quoted input only if single or double quotes are used.
Fixes#8561, #8563
When the length of the quicklist is 1(only one zipmap), the rotate operation will cause
memory overlap when moving an entity from the tail of the zipmap to the head.
quicklistRotate is a dead code, so it has no impact on the existing code.
Since the API declared (as #define) in redismodule.h and uses
the CLIENT_ID_AOF that declared in the server.h, when
a module will want to make use of this API, it will get a compilation
error (module doesn't include the server.h).
The API was broken by d6eb3af (failed attempt for a cleanup).
Revert to the original version of RedisModule_IsAOFClient
that uses UINT64_MAX instead of CLIENT_ID_AOF
