This bug affected RM_StringToLongDouble and HINCRBYFLOAT.
I added tests for both cases.
Main changes:
1. Fixed string2ld to fail if string contains \0 in the middle
2. Use string2ld in getLongDoubleFromObject - No point of
having duplicated code here
The two changes above broke RM_SaveLongDouble/RM_LoadLongDouble
because the long double string was saved with length+1 (An innocent
mistake, but it's actually a bug - The length passed to
RM_SaveLongDouble should not include the last \0).
If a blocked module client times-out (or disconnects, unblocked
by CLIENT command, etc.) we need to call moduleUnblockClient
in order to free memory allocated by the module sub-system
and blocked-client private data
Other changes:
Made blockedonkeys.tcl tests a bit more aggressive in order
to smoke-out potential memory leaks
This commit solves the following bug:
127.0.0.1:6379> XGROUP CREATE x grp $ MKSTREAM
OK
127.0.0.1:6379> XADD x 666 f v
"666-0"
127.0.0.1:6379> XREADGROUP GROUP grp Alice BLOCK 0 STREAMS x >
1) 1) "x"
2) 1) 1) "666-0"
2) 1) "f"
2) "v"
127.0.0.1:6379> XADD x 667 f v
"667-0"
127.0.0.1:6379> XDEL x 667
(integer) 1
127.0.0.1:6379> XREADGROUP GROUP grp Alice BLOCK 0 STREAMS x >
1) 1) "x"
2) (empty array)
The root cause is that we use s->last_id in streamCompareID
while we should use the last *valid* ID
- make lua-replicate-commands mutable (it never was, but i don't see why)
- make tcp-backlog immutable (fix a recent refactory mistake)
- increase the max limit of a few configs to match what they were before
the recent refactory
This commit solves several edge cases that are related to
exhausting the streamID limits: We should correctly calculate
the succeeding streamID instead of blindly incrementing 'seq'
This affects both XREAD and XADD.
Other (unrelated) changes:
Reply with a better error message when trying to add an entry
to a stream that has exhausted last_id
With the previous API, a NULL return value was ambiguous and could
represent either an old value of NULL or an error condition. The new API
returns a status code and allows the old value to be returned
by-reference.
This commit also includes test coverage based on
tests/modules/datatype.c which did not exist at the time of the original
commit.
it seems that commit b087dd1db6 accidentially changed
gen_write_load to not use deferred client, which causes them to be slower and not
generate high load which they should, making some tests less effecitive
Changes in behavior:
- Change server.stream_node_max_entries from int64_t to long long, so that it can be used by the generic infra
- standard error reply instead of "repl-backlog-size must be 1 or greater" and such
- tls-port and a few TLS booleans were readable (config get) even when USE_OPENSSL was off (now they aren't)
- syslog-enabled, syslog-ident, cluster-enabled, appendfilename, and supervised didn't have a get (now they do)
- pidfile was initialized to NULL in InitServerConfig but had CONFIG_DEFAULT_PID_FILE in rewriteConfig (so the real default was "", but rewrite would cause it to be set), fixed the rewrite.
- TLS config in server.h was uninitialized (if no tls config args were provided)
Adding test for sanity and coverage
there were two lssues, one is taht BGREWRITEAOF failed since the initial one was still in progress
the solution for this one is to enable appendonly from the server startup so there's no initial aofrw.
the other problem was 0 loading progress events, theory is that on some
platforms a sleep of 1 will cause a much greater delay due to the context
switch, but on other platform it doesn't. in theory a sleep of 100 micro
for 1k keys whould take 100ms, and with hz of 500 we should be gettering
50 events (one every 2ms). in practise it doesn't work like that, so trying
to find a sleep that would be long enough but still not cause the test to take
too long.
Calling XADD with 0-0 or 0 would result in creating an
empty key and storing it in the database.
Even worse, because XADD will reply with error the action
will not be replicated, creating a master-replica
inconsistency
- Adding RM_ScanKey
- Adding tests for RM_ScanKey
- Refactoring RM_Scan API
Changes in RM_Scan
- cleanup in docs and coding convention
- Moving out of experimantal Api
- Adding ctx to scan callback
- Dont use cursor of -1 as an indication of done (can be a valid cursor)
- Set errno when returning 0 for various reasons
- Rename Cursor to ScanCursor
- Test filters key that are not strings, and opens a key if NULL
The implementation expose the following new functions:
1. RedisModule_CursorCreate - allow to create a new cursor object for
keys scanning
2. RedisModule_CursorRestart - restart an existing cursor to restart the
scan
3. RedisModule_CursorDestroy - destroy an existing cursor
4. RedisModule_Scan - scan keys
The RedisModule_Scan function gets a cursor object, a callback and void*
(used as user private data).
The callback will be called for each key in the database proving the key
name and the value as RedisModuleKey.
- the API name was odd, separated to two apis one for LRU and one for LFU
- the LRU idle time was in 1 second resolution, which might be ok for RDB
and RESTORE, but i think modules may need higher resolution
- adding tests for LFU and for handling maxmemory policy mismatch
recently added more reads into that function, if a later read fails, i must
either free what's already allocated, or return the pointer so that the free
callback will release it.
Add two new functions that leverage the RedisModuleDataType mechanism
for RDB serialization/deserialization and make it possible to use it
to/from arbitrary strings:
* RM_SaveDataTypeToString()
* RM_LoadDataTypeFromString()
rename RM_ServerInfoGetFieldNumerical RM_ServerInfoGetFieldSigned
move string2ull to util.c
fix leak in RM_GetServerInfo when duplicate info fields exist
looks like each platform implements long double differently (different bit count)
so we can't save them as binary, and we also want to avoid creating a new RDB
format version, so we save these are hex strings using "%La".
This commit includes a change in the arguments of ld2string to support this.
as well as tests for coverage and short reads.
coded by @guybe7
- Add RM_GetServerInfo and friends
- Add auto memory for new opaque struct
- Add tests for new APIs
other minor fixes:
- add const in various char pointers
- requested_section in modulesCollectInfo was actually not sds but char*
- extract new string2d out of getDoubleFromObject for code reuse
Add module API for
* replication hooks: role change, master link status, replica online/offline
* persistence hooks: saving, loading, loading progress
* misc hooks: cron loop, shutdown, module loaded/unloaded
* change the way hooks test work, and add tests for all of the above
startLoading() now gets flag indicating what is loaded.
stopLoading() now gets an indication of success or failure.
adding startSaving() and stopSaving() with similar args and role.
sometimes we have several assertions with the same condition in the same test
at different stages, and when these fail (the ones that print the condition
text) you don't know which one it was. other assertions didn't print the
condition text (variable names), just the expected and unexpected values.
So now, all assertions print context line, and conditin text.
besides, one of the major differences between 'assert' and 'assert_equal',
is that the later is able to print the value that doesn't match the expected.
if there is a rare non-reproducible failure, it is helpful to know what was
the value the test encountered and how far it was from the threshold.
So now, adding assert_lessthan and assert_range that can be used in some places.
were we used just 'assert { a > b }' so far.
Adding a test for coverage for RM_Call in a new "misc" unit
to be used for various short simple tests
also solves compilation warnings in redismodule.h and fork.c
misc:
- handle SSL_has_pending by iterating though these in beforeSleep, and setting timeout of 0 to aeProcessEvents
- fix issue with epoll signaling EPOLLHUP and EPOLLERR only to the write handlers. (needed to detect the rdb pipe was closed)
- add key-load-delay config for testing
- trim connShutdown which is no longer needed
- rioFdsetWrite -> rioFdWrite - simplified since there's no longer need to write to multiple FDs
- don't detect rdb child exited (don't call wait3) until we detect the pipe is closed
- Cleanup bad optimization from rio.c, add another one
* Introduce a connection abstraction layer for all socket operations and
integrate it across the code base.
* Provide an optional TLS connections implementation based on OpenSSL.
* Pull a newer version of hiredis with TLS support.
* Tests, redis-cli updates for TLS support.
now that replica can read rdb directly from the socket, it should avoid exiting
on short read and instead try to re-sync.
this commit tries to have minimal effects on non-diskless rdb reading.
and includes a test that tries to trigger this scenario on various read cases.
* create module API for forking child processes.
* refactor duplicate code around creating and tracking forks by AOF and RDB.
* child processes listen to SIGUSR1 and dies exitFromChild in order to
eliminate a valgrind warning of unhandled signal.
* note that BGSAVE error reply has changed.
valgrind error is:
Process terminating with default action of signal 10 (SIGUSR1)
The implementation of the diskless replication was currently diskless only on the master side.
The slave side was still storing the received rdb file to the disk before loading it back in and parsing it.
This commit adds two modes to load rdb directly from socket:
1) when-empty
2) using "swapdb"
the third mode of using diskless slave by flushdb is risky and currently not included.
other changes:
--------------
distinguish between aof configuration and state so that we can re-enable aof only when sync eventually
succeeds (and not when exiting from readSyncBulkPayload after a failed attempt)
also a CONFIG GET and INFO during rdb loading would have lied
When loading rdb from the network, don't kill the server on short read (that can be a network error)
Fix rdb check when performed on preamble AOF
tests:
run replication tests for diskless slave too
make replication test a bit more aggressive
Add test for diskless load swapdb
Add tests to check basic functionality of this optional keyword, and also tested with
a module (redisgraph). Checked quickly with valgrind, no issues.
Copies name the type name canonicalisation code from `typeCommand`, perhaps this would
be better factored out to prevent the two diverging and both needing to be edited to
add new `OBJ_*` types, but this is a little fiddly with C strings.
The [redis-doc](https://github.com/antirez/redis-doc/blob/master/commands.json) repo
will need to be updated with this new arg if accepted.
A quirk to be aware of here is that the GEO commands are backed by zsets not their own
type, so they're not distinguishable from other zsets.
Additionally, for sparse types this has the same behaviour as `MATCH` in that it may
return many empty results before giving something, even for large `COUNT`s.
In fast systems "SLOWLOG RESET" is fast enough to don't be logged even
when the time limit is "1" sometimes. Leading to false positives such
as:
[err]: SLOWLOG - can be disabled in tests/unit/slowlog.tcl
Expected '1' to be equal to '0'
Now clients that are ready to be terminated asynchronously are processed
more often in beforeSleep() instead of being processed in serverCron().
This means that the test will not be able to catch the moment the client
was terminated, also note that the 'omem' figure now changes in big
steps, because of the new client output buffers layout.
So we have to change the test range in order to accomodate for that.
Yet the test is useful enough to be worth taking, even if its precision
is reduced by this commit. Probably if we get more problems, a thing
that makes sense is just to check that the limit is < 200k. That's more
than enough actually.
solving few replication related tests race conditions which fail on slow machines
bugfix in slave buffers test: since the test is executed twice, each time with
a different commands count, the threshold for the delta can't be a constant.
A filter handle is returned and can be used to unregister a filter. In
the future it can also be used to further configure or manipulate the
filter.
Filters are now automatically unregistered when a module unloads.
The XCLAIM docs state the XCLAIM increments the delivery counter for
messages. This PR makes the code match the documentation - which seems
like the desired behaviour - whilst still allowing RETRYCOUNT to be
specified manually.
My understanding of the way streamPropagateXCLAIM() works is that this
change will safely propagate to replicas since retry count is pulled
directly from the streamNACK struct.
Fixes#5194
This way the behavior is very similar to the past one.
This is useful in order to remember the user she probably failed to
configure a password correctly.
Few tests had borderline thresholds that were adjusted.
The slave buffers test had two issues, preventing the slave buffer from growing:
1) the slave didn't necessarily go to sleep on time, or woke up too early,
now using SIGSTOP to make sure it goes to sleep exactly when we want.
2) the master disconnected the slave on timeout
This should be able to find new bugs and regressions about the new
sorted set update function when ZADD is used to update an element
already existing.
The test is able to find the bug fixed at 2f282aee immediately.
* allowing --single to be repeated
* adding --only so that only a specific test inside a unit can be run
* adding --skiptill useful to resume a test that crashed passed the problematic unit.
useful together with --clients 1
* adding --skipfile to use a file containing list of tests names to skip
* printing the names of the tests that are skiped by skipfile or denytags
* adding --config to add config file options from command line
it looks like on slow machines we're getting:
[err]: slave buffer are counted correctly in tests/unit/maxmemory.tcl
Expected condition '$slave_buf > 2*1024*1024' to be true (16914 > 2*1024*1024)
this is a result of the slave waking up too early and eating the
slave buffer before the traffic and the test ends.
on slower machines, the active defrag test tended to fail.
although the fragmentation ratio was below the treshold, the defragger was
still in the middle of a scan cycle.
this commit changes:
- the defragger uses the current fragmentation state, rather than the cache one
that is updated by server cron every 100ms. this actually fixes a bug of
starting one excess scan cycle
- the test lets the defragger use more CPU cycles, in hope that the defrag
will be faster, but also give it more time before we give up.
A) slave buffers didn't count internal fragmentation and sds unused space,
this caused them to induce eviction although we didn't mean for it.
B) slave buffers were consuming about twice the memory of what they actually needed.
- this was mainly due to sdsMakeRoomFor growing to twice as much as needed each time
but networking.c not storing more than 16k (partially fixed recently in 237a38737).
- besides it wasn't able to store half of the new string into one buffer and the
other half into the next (so the above mentioned fix helped mainly for small items).
- lastly, the sds buffers had up to 30% internal fragmentation that was wasted,
consumed but not used.
C) inefficient performance due to starting from a small string and reallocing many times.
what i changed:
- creating dedicated buffers for reply list, counting their size with zmalloc_size
- when creating a new reply node from, preallocate it to at least 16k.
- when appending a new reply to the buffer, first fill all the unused space of the
previous node before starting a new one.
other changes:
- expose mem_not_counted_for_evict info field for the benefit of the test suite
- add a test to make sure slave buffers are counted correctly and that they don't cause eviction
* fail the test (exit code) in case of timeout.
* add --wait-server to allow attaching a debugger
* add --dont-clean to keep log files when tests are done
RESTORE now supports:
1. Setting LRU/LFU
2. Absolute-time TTL
Other related changes:
1. RDB loading will not override LRU bits when RDB file
does not contain the LRU opcode.
2. RDB loading will not set LRU/LFU bits if the server's
maxmemory-policy does not match.
Removing the fix about 50% of the times the test will not be able to
pass cleanly. It's very hard to write a test that will always fail, or
actually, it is possible but then it's likely that it will consistently
pass if we change some random bit, so better to use randomization here.
problems fixed:
* failing to read fragmentation information from jemalloc
* overflow in jemalloc fragmentation hint to the defragger
* test suite not triggering eviction after population
