In mostly production environment, normal user's behavior should be
limited.
Now in redis ACL mechanism we can do it like that:
user default on +@all ~* -@dangerous nopass
user admin on +@all ~* >someSeriousPassword
Then the default normal user can not execute dangerous commands like
FLUSHALL/KEYS.
But some admin commands are in dangerous category too like PSYNC,
and the configurations above will forbid replica from sync with master.
Finally I think we could add a new configuration for replication,
it is masteruser option, like this:
masteruser admin
masterauth someSeriousPassword
Then replica will try AUTH admin someSeriousPassword and get privilege
to execute PSYNC. If masteruser is NULL, replica would AUTH with only
masterauth like before.
During the full database resync we may still have unsaved changes
on the receiving side. This causes a race condition between
synced data rename/load and the rename of rdbSave tempfile.
The slave sends \n keepalive messages to the master while parsing the rdb,
and later sends REPLCONF ACK once a second. rarely, the master recives both
a linefeed char and a REPLCONF in the same read, \n*3\r\n$8\r\nREPLCONF\r\n...
and it tries to trim two chars (\r\n) from the query buffer,
trimming the '*' from *3\r\n$8\r\nREPLCONF\r\n...
then the master tries to process a command starting with '3' and replies to
the slave a bunch of -ERR and one +OK.
although the slave silently ignores these (prints a log message), this corrupts
the replication offset at the slave since the slave increases the replication
offset, and the master did not.
other than the fix in processInlineBuffer, i did several other improvments
while hunting this very rare bug.
- when redis replies with "unknown command" it includes a portion of the
arguments, not just the command name. so it would be easier to understand
what was recived, in my case, on the slave side, it was -ERR, but
the "arguments" were the interesting part (containing info on the error).
- about a year ago i added code in addReplyErrorLength to print the error to
the log in case of a reply to master (since this string isn't actually
trasmitted to the master), now changed that block to print a similar log
message to indicate an error being sent from the master to the slave.
note that the slave is marked as CLIENT_SLAVE only after PSYNC was received,
so this will not cause any harm for REPLCONF, and will only indicate problems
that are gonna corrupt the replication stream anyway.
- two places were c->reply was emptied, and i wanted to reset sentlen
this is a precaution (i did not actually see such a problem), since a
non-zero sentlen will cause corruption to be transmitted on the socket.
A) slave buffers didn't count internal fragmentation and sds unused space,
this caused them to induce eviction although we didn't mean for it.
B) slave buffers were consuming about twice the memory of what they actually needed.
- this was mainly due to sdsMakeRoomFor growing to twice as much as needed each time
but networking.c not storing more than 16k (partially fixed recently in 237a38737).
- besides it wasn't able to store half of the new string into one buffer and the
other half into the next (so the above mentioned fix helped mainly for small items).
- lastly, the sds buffers had up to 30% internal fragmentation that was wasted,
consumed but not used.
C) inefficient performance due to starting from a small string and reallocing many times.
what i changed:
- creating dedicated buffers for reply list, counting their size with zmalloc_size
- when creating a new reply node from, preallocate it to at least 16k.
- when appending a new reply to the buffer, first fill all the unused space of the
previous node before starting a new one.
other changes:
- expose mem_not_counted_for_evict info field for the benefit of the test suite
- add a test to make sure slave buffers are counted correctly and that they don't cause eviction
PR #5081 fixes an "interesting" bug about Redis Cluster failover but in
general about the updating of repl_down_since, that is used in order to
count the time a slave was left disconnected from its master.
While the fix provided resolves the specific issue, in general the
validity of repl_down_since is limited to states that are different
than the state CONNECTED, and the disconnected time is set when the
state is DISCONNECTED. However from CONNECTED to other states, the state
machine must always go to DISCONNECTED first. So it makes sense to set
the field to zero (since it is meaningless in that context) when the
state is set to CONNECTED.
after a slave is promoted (assuming it has no slaves
and it booted over an hour ago), it will lose it's replication
backlog at the next replication cron, rather than waiting for slaves
to connect to it.
so on a simple master/slave faiover, if the new slave doesn't connect
immediately, it may be too later and PSYNC2 will fail.
We have this operation in two places: when caching the master and
when linking a new client after the client creation. By having an API
for this we avoid incurring in errors when modifying one of the two
places forgetting the other. The function is also a good place where to
document why we cache the linked list node.
Related to #4497 and #4210.
When we free the backlog, we should use a new
replication ID and clear the ID2. Since without
backlog we can not increment master_repl_offset
even do write commands, that may lead to inconsistency
when we try to connect a "slave-before" master
(if this master is our slave before, our replid
equals the master's replid2). As the master have our
history, so we can match the master's replid2 and
second_replid_offset, that make partial sync work,
but the data is inconsistent.
This commit is a reinforcement of commit c1c99e9.
1. Replication information can be stored when the RDB file is
generated by a mater using server.slaveseldb when server.repl_backlog
is not NULL, or set repl_stream_db be -1. That's safe, because
NULL server.repl_backlog will trigger full synchronization,
then master will send SELECT command to replicaiton stream.
2. Only do rdbSave* when rsiptr is not NULL,
if we do rdbSave* without rdbSaveInfo, slave will miss repl-stream-db.
3. Save the replication informations also in the case of
SAVE command, FLUSHALL command and DEBUG reload.
This commit attempts to fix a number of bugs reported in #4316.
They are related to the way replication info like replication ID,
offsets, and currently selected DB in the master client, are stored
and loaded by Redis. In order to avoid inconsistencies the changes in
this commit try to enforce that:
1. Replication information are only stored when the RDB file is
generated by a slave that has a valid 'master' client, so that we can
always extract the currently selected DB.
2. When replication informations are persisted in the RDB file, all the
info for a successful PSYNC or nothing is persisted.
3. The RDB replication informations are only loaded if the instance is
configured as a slave, otherwise a master can start with IDs that relate
to a different history of the data set, and stil retain such IDs in the
future while receiving unrelated writes.
A slave may be started with an RDB file able to provide enough slave to
perform a successful partial SYNC with its master. However in such a
case, how outlined in issue #4268, the slave backlog will not be
started, since it was only initialized on full syncs attempts. This
creates different problems with successive PSYNC attempts that will
always result in full synchronizations.
Thanks to @fdingiit for discovering the issue.
The master client cleanup was incomplete: resetClient() was missing and
the output buffer of the client was not reset, so pending commands
related to the previous connection could be still sent.
The first problem caused the client argument vector to be, at times,
half populated, so that when the correct replication stream arrived the
protcol got mixed to the arugments creating invalid commands that nobody
called.
Thanks to @yangsiran for also investigating this problem, after
already providing important design / implementation hints for the
original PSYNC2 issues (see referenced Github issue).
Note that this commit adds a new function to the list library of Redis
in order to be able to reset a list without destroying it.
Related to issue #3899.
During the review of the fix for #3899, @yangsiran identified an
implementation bug: given that the offset is now relative to the applied
part of the replication log, when we cache a master, the successive
PSYNC2 request will be made in order to *include* the transaction that
was not completely processed. This means that we need to discard any
pending transaction from our replication buffer: it will be re-executed.
This bug was discovered by @kevinmcgehee and constituted a major hidden
bug in the PSYNC2 implementation, caused by the propagation from the
master of incomplete commands to slaves.
The bug had several results:
1. Borrowing from Kevin text in the issue: "Given that slaves blindly
copy over their master's input into their own replication backlog over
successive read syscalls, it's possible that with large commands or
small TCP buffers, partial commands are present in this buffer. If the
master were to fail before successfully propagating the entire command
to a slave, the slaves will never execute the partial command (since the
client is invalidated) but will copy it to replication backlog which may
relay those invalid bytes to its slaves on PSYNC2, corrupting the
backlog and possibly other valid commands that follow the failover.
Simple command boundaries aren't sufficient to capture this, either,
because in the case of a MULTI/EXEC block, if the master successfully
propagates a subset of the commands but not the EXEC, then the
transaction in the backlog becomes corrupt and could corrupt other
slaves that consume this data."
2. As identified by @yangsiran later, there is another effect of the
bug. For the same mechanism of the first problem, a slave having another
slave, could receive a full resynchronization request with an already
half-applied command in the backlog. Once the RDB is ready, it will be
sent to the slave, and the replication will continue sending to the
sub-slave the other half of the command, which is not valid.
The fix, designed by @yangsiran and @antirez, and implemented by
@antirez, uses a secondary buffer in order to feed the sub-masters and
update the replication backlog and offsets, only when a given part of
the query buffer is actually *applied* to the state of the instance,
that is, when the command gets processed and the command is not pending
in the Redis transaction buffer because of CLIENT_MULTI state.
Given that now the backlog and offsets representation are in agreement
with the actual processed commands, both issue 1 and 2 should no longer
be possible.
Thanks to @kevinmcgehee, @yangsiran and @oranagra for their work in
identifying and designing a fix for this problem.
This commit also contains other changes in order to conform the code to
the Redis core style, specifically 80 chars max per line, smart
conditionals in the same line:
if (that) do_this();
This actually includes two changes:
1) No newlines to take the master-slave link up when the upstream master
is down. Doing this is dangerous because the sub-slave often is received
replication protocol for an half-command, so can't receive newlines
without desyncing the replication link, even with the code in order to
cancel out the bytes that PSYNC2 was using. Moreover this is probably
also not needed/sane, because anyway the slave can keep serving
requests, and because if it's configured to don't serve stale data, it's
a good idea, actually, to break the link.
2) When a +CONTINUE with a different ID is received, we now break
connection with the sub-slaves: they need to be notified as well. This
was part of the original specification but for some reason it was not
implemented in the code, and was alter found as a PSYNC2 bug in the
integration testing.
