Refine getTimeoutFromObjectOrReply() out-of-range check.
Timeout is parsed (and verifies out of range) as double and
multiplied by 1000, added mstime() and stored in long-long
which might lead to out-of-range value of long-long.
Co-authored-by: moticless <moticless@github.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
This PR introduces a couple of changes to improve cluster test stability:
1. Increase the cluster node timeout to 3 seconds, which is similar to the
normal cluster tests, but introduce a new mechanism to increase the ping
period so that the tests are still fast. This new config is a debug config.
2. Set `cluster-replica-no-failover yes` on a wider array of tests which are
sensitive to failovers. This was occurring on the ARM CI.
There is a race condition in the test:
```
*** [err]: redis-cli --cluster add-node with cluster-port in tests/unit/cluster/cli.tcl
Expected '5' to be equal to '4' {assert_equal 5 [CI 0 cluster_known_nodes]} proc ::test)
```
When using cli to add node, there can potentially be a race condition
in which all nodes presenting cluster state o.k even though the added
node did not yet meet all cluster nodes.
This comment and the fix were taken from #11221. Also apply it in several
other similar places.
Mainly fix two minor bug
1. When handle BL*POP/BLMOVE commands with blocked clients, we should increment server.dirty.
2. `listPopRangeAndReplyWithKey()` in `serveClientBlockedOnList()` should not repeat calling
`signalModifiedKey()` which has been called when an element was pushed on the list.
(was skipped in all bpop commands, other than blmpop)
Other optimization
add `signal` param for `listElementsRemoved` to skip `signalModifiedKey()` to unify all pop operation.
Unifying all pop operations also prepares us for #11303, so that we can avoid having to deal with the
conversion from quicklist to listpack() in various places when the list shrinks.
The original idea behind auto-setting the default (first,last,step) spec was to use
the most "open" flags when the user didn't provide any key-spec flags information.
While the above idea is a good approach, it really makes no sense to set
CMD_KEY_VARIABLE_FLAGS if the user didn't provide the getkeys-api flag:
in this case there's not way to retrieve these variable flags, so what's the point?
Internally in redis there was code to ignore this already, so this fix doesn't change
redis's behavior, it only affects the output of COMMAND command.
If a command gets an OOM response and then if we set maxmemory to zero
to disable the limit, server.pre_command_oom_state never gets updated
and it stays true. As RM_Call() calls with "respect deny-oom" flag checks
server.pre_command_oom_state, all calls will fail with OOM.
Added server.maxmemory check in RM_Call() to process deny-oom flag
only if maxmemory is configured.
Adds a number of user management/ACL validaiton/command execution functions to improve a
Redis module's ability to enforce ACLs correctly and easily.
* RM_SetContextUser - sets a RedisModuleUser on the context, which RM_Call will use to both
validate ACLs (if requested and set) as well as assign to the client so that scripts executed via
RM_Call will have proper ACL validation.
* RM_SetModuleUserACLString - Enables one to pass an entire ACL string, not just a single OP
and have it applied to the user
* RM_GetModuleUserACLString - returns a stringified version of the user's ACL (same format as dump
and list). Contains an optimization to cache the stringified version until the underlying ACL is modified.
* Slightly re-purpose the "C" flag to RM_Call from just being about ACL check before calling the
command, to actually running the command with the right user, so that it also affects commands
inside EVAL scripts. see #11231
Executing an XAUTOCLAIM command on a stream key in a specific state, with a
specially crafted COUNT argument may cause an integer overflow, a subsequent
heap overflow, and potentially lead to remote code execution.
The problem affects Redis versions 7.0.0 or newer.
Starting from 6.2, after ACL SETUSER user reset, the user
will carry the sanitize-payload flag. It was added in #7807,
and then ACL SETUSER reset is inconsistent with default
newly created user which missing sanitize-payload flag.
Same as `off` and `on` these two bits are mutually exclusive,
the default created user needs to have sanitize-payload flag.
Adds USER_FLAG_SANITIZE_PAYLOAD flag to ACLCreateUser.
Note that the bug don't have any real implications,
since the code in rdb.c (rdbLoadObject) checks for
`USER_FLAG_SANITIZE_PAYLOAD_SKIP`, so the fact that
`USER_FLAG_SANITIZE_PAYLOAD` is missing doesn't really matters.
Added tests to make sure it won't be broken in the future,
and updated the comment in ACLSetUser and redis.conf
When using `INFO ALL <section>`, when `section` is a specific module section.
Redis will not print the additional section(s).
The fix in this case, will search the modules info sections if the user provided additional sections to `ALL`.
Co-authored-by: Oran Agra <oran@redislabs.com>
This PR mainly deals with 2 crashes introduced in #9357,
and fix the QUICKLIST-PACKED-THRESHOLD mess in external test mode.
1. Fix crash due to deleting an entry from a compress quicklistNode
When inserting a large element, we need to create a new quicklistNode first,
and then delete its previous element, if the node where the deleted element is
located is compressed, it will cause a crash.
Now add `dont_compress` to quicklistNode, if we want to use a quicklistNode
after some operation, we can use this flag like following:
```c
node->dont_compress = 1; /* Prevent to be compressed */
some_operation(node); /* This operation might try to compress this node */
some_other_operation(node); /* We can use this node without decompress it */
node->dont_compress = 0; /* Re-able compression */
quicklistCompressNode(node);
```
Perhaps in the future, we could just disable the current entry from being
compressed during the iterator loop, but that would require more work.
2. Fix crash due to wrongly split quicklist
before #9357, the offset param of _quicklistSplitNode() will not negative.
For now, when offset is negative, the split extent will be wrong.
following example:
```c
int orig_start = after ? offset + 1 : 0;
int orig_extent = after ? -1 : offset;
int new_start = after ? 0 : offset;
int new_extent = after ? offset + 1 : -1;
# offset: -2, after: 1, node->count: 2
# current wrong range: [-1,-1] [0,-1]
# correct range: [1,-1] [0, 1]
```
Because only `_quicklistInsert()` splits the quicklistNode and only
`quicklistInsertAfter()`, `quicklistInsertBefore()` call _quicklistInsert(),
so `quicklistReplaceEntry()` and `listTypeInsert()` might occur this crash.
But the iterator of `listTypeInsert()` is alway from head to tail(iter->offset is
always positive), so it is not affected.
The final conclusion is this crash only occur when we insert a large element
with negative index into a list, that affects `LSET` command and `RM_ListSet`
module api.
3. In external test mode, we need to restore quicklist packed threshold after
when the end of test.
4. Show `node->count` in quicklistRepr().
5. Add new tcl proc `config_get_set` to support restoring config in tests.
When using cli to add node, there can potentially be a race condition in
which all nodes presenting cluster state o.k even though the added node
did not yet meet all cluster nodes.
this adds another utility function to wait until all cluster nodes see the same cluster size
EVAL scripts are by default not considered `write` commands, so they were allowed on a replica.
But when adding a shebang, they become `write` command (unless the `no-writes` flag is added).
With this change we'll handle them as write commands, and reply with MOVED instead of
READONLY when executed on a redis cluster replica.
Co-authored-by: chendianqiang <chendianqiang@meituan.com>
Add a new "D" flag to RM_Call which runs whatever verification the user requests,
but returns before the actual execution of the command.
It automatically enables returning error messages as CallReply objects to distinguish
success (NULL) from failure (CallReply returned).
When RM_Call was used with `M` (reject OOM), `W` (reject writes),
as well as `S` (rejecting stale or write commands in "Script mode"),
it would have only checked the command flags, but not the declared
script flag in case it's a command that runs a script.
Refactoring: extracts out similar code in server.c's processCommand
to be usable in RM_Call as well.
Bugfix:
with the scenario if we force assigned a slot to other master,
old master will lose the slot ownership, then old master will
call the function delKeysInSlot() to delete all keys which in
the slot. These delete operations should replicate to replicas,
avoid the data divergence issue in master and replicas.
Additionally, in this case, we now call:
* signalModifiedKey (to invalidate WATCH)
* moduleNotifyKeyspaceEvent (key space notification for modules)
* dirty++ (to signal that the persistence file may be outdated)
Co-authored-by: weimeng <weimeng@didiglobal.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Check the validity of the value before performing the create operation,
prevents new data from being generated even if the request fails to execute.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: chendianqiang <chendianqiang@meituan.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
Redis 7.0 has #9890 which added an assertion when the propagation queue
was not flushed and we got to beforeSleep.
But it turns out that when processCommands calls getNodeByQuery and
decides to reject the command, it can lead to a key that was lazy
expired and is deleted without later flushing the propagation queue.
This change prevents lazy expiry from deleting the key at this stage
(not as part of a command being processed in `call`)
Fix `Test replication with lazy expire` test to not timeout the wait command.
This fix will allow the test to pass on slow environments and when running with valgrind.
The PR reverts the changes made on #10969.
The reason for revert was trigger because of occasional test failure
that started after the PR was merged.
The issue is that if there is a lazy expire during the command invocation,
the `del` command is added to the replication stream after the command
placeholder. So the logical order on the primary is:
* Delete the key (lazy expiration)
* Command invocation
But the replication stream gets it the other way around:
* Command invocation (because the command is written into the placeholder)
* Delete the key (lazy expiration)
So if the command write to the key that was just lazy expired we will get
inconsistency between primary and replica.
One solution we considered is to add another lazy expire replication stream
and write all the lazy expire there. Then when replicating, we will replicate the
lazy expire replication stream first. This will solve this specific test failure but
we realize that the issues does not ends here and the more we dig the more
problems we find.One of the example we thought about (that can actually
crashes Redis) is as follow:
* User perform SINTERSTORE
* When Redis tries to fetch the second input key it triggers lazy expire
* The lazy expire trigger a module logic that deletes the first input key
* Now Redis hold the robj of the first input key that was actually freed
We believe we took the wrong approach and we will come up with another
PR that solve the problem differently, for now we revert the changes so we
will not have the tests failure.
Notice that not the entire code was revert, some parts of the PR are changes
that we would like to keep. The changes that **was** reverted are:
* Saving a placeholder for replication at the beginning of the command (`call` function)
* Order of the replication stream on active expire and eviction (we will decide how
to handle it correctly on follow up PR)
* `Spop` changes are no longer needed (because we reverted the placeholder code)
Changes that **was not** reverted:
* On expire/eviction, wrap the `del` and the notification effect in a multi exec.
* `PropagateNow` function can still accept a special dbid, -1, indicating not to replicate select.
* Keep optimisation for reusing the `alsoPropagate` array instead of allocating it each time.
Tests:
* All tests was kept and only few tests was modify to work correctly with the changes
* Test was added to verify that the revert fixes the issues.
* Support BUILD_TLS=module to be loaded as a module via config file or
command line. e.g. redis-server --loadmodule redis-tls.so
* Updates to redismodule.h to allow it to be used side by side with
server.h by defining REDISMODULE_CORE_MODULE
* Changes to server.h, redismodule.h and module.c to avoid repeated
type declarations (gcc 4.8 doesn't like these)
* Add a mechanism for non-ABI neutral modules (ones who include
server.h) to refuse loading if they detect not being built together with
redis (release.c)
* Fix wrong signature of RedisModuleDefragFunc, this could break
compilation of a module, but not the ABI
* Move initialization of listeners in server.c to be after loading
the modules
* Config TLS after initialization of listeners
* Init cluster after initialization of listeners
* Add TLS module to CI
* Fix a test suite race conditions:
Now that the listeners are initialized later, it's not sufficient to
wait for the PID message in the log, we need to wait for the "Server
Initialized" message.
* Fix issues with moduleconfigs test as a result from start_server
waiting for "Server Initialized"
* Fix issues with modules/infra test as a result of an additional module
present
Notes about Sentinel:
Sentinel can't really rely on the tls module, since it uses hiredis to
initiate connections and depends on OpenSSL (won't be able to use any
other connection modules for that), so it was decided that when TLS is
built as a module, sentinel does not support TLS at all.
This means that it keeps using redis_tls_ctx and redis_tls_client_ctx directly.
Example code of config in redis-tls.so(may be use in the future):
RedisModuleString *tls_cfg = NULL;
void tlsInfo(RedisModuleInfoCtx *ctx, int for_crash_report) {
UNUSED(for_crash_report);
RedisModule_InfoAddSection(ctx, "");
RedisModule_InfoAddFieldLongLong(ctx, "var", 42);
}
int tlsCommand(RedisModuleCtx *ctx, RedisModuleString **argv, int argc)
{
if (argc != 2) return RedisModule_WrongArity(ctx);
return RedisModule_ReplyWithString(ctx, argv[1]);
}
RedisModuleString *getStringConfigCommand(const char *name, void *privdata) {
REDISMODULE_NOT_USED(name);
REDISMODULE_NOT_USED(privdata);
return tls_cfg;
}
int setStringConfigCommand(const char *name, RedisModuleString *new, void *privdata, RedisModuleString **err) {
REDISMODULE_NOT_USED(name);
REDISMODULE_NOT_USED(err);
REDISMODULE_NOT_USED(privdata);
if (tls_cfg) RedisModule_FreeString(NULL, tls_cfg);
RedisModule_RetainString(NULL, new);
tls_cfg = new;
return REDISMODULE_OK;
}
int RedisModule_OnLoad(void *ctx, RedisModuleString **argv, int argc)
{
....
if (RedisModule_CreateCommand(ctx,"tls",tlsCommand,"",0,0,0) == REDISMODULE_ERR)
return REDISMODULE_ERR;
if (RedisModule_RegisterStringConfig(ctx, "cfg", "", REDISMODULE_CONFIG_DEFAULT, getStringConfigCommand, setStringConfigCommand, NULL, NULL) == REDISMODULE_ERR)
return REDISMODULE_ERR;
if (RedisModule_LoadConfigs(ctx) == REDISMODULE_ERR) {
if (tls_cfg) {
RedisModule_FreeString(ctx, tls_cfg);
tls_cfg = NULL;
}
return REDISMODULE_ERR;
}
...
}
Co-authored-by: zhenwei pi <pizhenwei@bytedance.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
This PR includes 2 missed test cases of XDEL and XGROUP CREATE command
1. one test case: XDEL delete multiply id once
2. 3 test cases: XGROUP CREATE has ENTRIESREAD parameter,
which equal 0 (special positive number), 3 and negative value.
Co-authored-by: Ubuntu <lucas.guang.yang1@huawei.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
This PR makes sure that "name" is unique for all arguments in the same
level (i.e. all args of a command and all args within a block/oneof).
This means several argument with identical meaning can be referred to together,
but also if someone needs to refer to a specific one, they can use its full path.
In addition, the "display_text" field has been added, to be used by redis.io
in order to render the syntax of the command (for the vast majority it is
identical to "name" but sometimes we want to use a different string
that is not "name")
The "display" field is exposed via COMMAND DOCS and will be present
for every argument, except "oneof" and "block" (which are container
arguments)
Other changes:
1. Make sure we do not have any container arguments ("oneof" or "block")
that contain less than two sub-args (otherwise it doesn't make sense)
2. migrate.json: both AUTH and AUTH2 should not be "optional"
3. arg names cannot contain underscores, and force the usage of hyphens
(most of these were a result of the script that generated the initial json files
from redis.io commands.json).
Currently, we call zfree(cmd->args), but the argument array
needs to be freed recursively (there might be sub-args).
Also fixed memory leaks on cmd->tips and cmd->history.
Fixes#11145
Fix replication inconsistency on modules that uses key space notifications.
### The Problem
In general, key space notifications are invoked after the command logic was
executed (this is not always the case, we will discuss later about specific
command that do not follow this rules). For example, the `set x 1` will trigger
a `set` notification that will be invoked after the `set` logic was performed, so
if the notification logic will try to fetch `x`, it will see the new data that was written.
Consider the scenario on which the notification logic performs some write
commands. for example, the notification logic increase some counter,
`incr x{counter}`, indicating how many times `x` was changed.
The logical order by which the logic was executed is has follow:
```
set x 1
incr x{counter}
```
The issue is that the `set x 1` command is added to the replication buffer
at the end of the command invocation (specifically after the key space
notification logic was invoked and performed the `incr` command).
The replication/aof sees the commands in the wrong order:
```
incr x{counter}
set x 1
```
In this specific example the order is less important.
But if, for example, the notification would have deleted `x` then we would
end up with primary-replica inconsistency.
### The Solution
Put the command that cause the notification in its rightful place. In the
above example, the `set x 1` command logic was executed before the
notification logic, so it should be added to the replication buffer before
the commands that is invoked by the notification logic. To achieve this,
without a major code refactoring, we save a placeholder in the replication
buffer, when finishing invoking the command logic we check if the command
need to be replicated, and if it does, we use the placeholder to add it to the
replication buffer instead of appending it to the end.
To be efficient and not allocating memory on each command to save the
placeholder, the replication buffer array was modified to reuse memory
(instead of allocating it each time we want to replicate commands).
Also, to avoid saving a placeholder when not needed, we do it only for
WRITE or MAY_REPLICATE commands.
#### Additional Fixes
* Expire and Eviction notifications:
* Expire/Eviction logical order was to first perform the Expire/Eviction
and then the notification logic. The replication buffer got this in the
other way around (first notification effect and then the `del` command).
The PR fixes this issue.
* The notification effect and the `del` command was not wrap with
`multi-exec` (if needed). The PR also fix this issue.
* SPOP command:
* On spop, the `spop` notification was fired before the command logic
was executed. The change in this PR would have cause the replication
order to be change (first `spop` command and then notification `logic`)
although the logical order is first the notification logic and then the
`spop` logic. The right fix would have been to move the notification to
be fired after the command was executed (like all the other commands),
but this can be considered a breaking change. To overcome this, the PR
keeps the current behavior and changes the `spop` code to keep the right
logical order when pushing commands to the replication buffer. Another PR
will follow to fix the SPOP properly and match it to the other command (we
split it to 2 separate PR's so it will be easy to cherry-pick this PR to 7.0 if
we chose to).
#### Unhanded Known Limitations
* key miss event:
* On key miss event, if a module performed some write command on the
event (using `RM_Call`), the `dirty` counter would increase and the read
command that cause the key miss event would be replicated to the replication
and aof. This problem can also happened on a write command that open
some keys but eventually decides not to perform any action. We decided
not to handle this problem on this PR because the solution is complex
and will cause additional risks in case we will want to cherry-pick this PR.
We should decide if we want to handle it in future PR's. For now, modules
writers is advice not to perform any write commands on key miss event.
#### Testing
* We already have tests to cover cases where a notification is invoking write
commands that are also added to the replication buffer, the tests was modified
to verify that the replica gets the command in the correct logical order.
* Test was added to verify that `spop` behavior was kept unchanged.
* Test was added to verify key miss event behave as expected.
* Test was added to verify the changes do not break lazy expiration.
#### Additional Changes
* `propagateNow` function can accept a special dbid, -1, indicating not
to replicate `select`. We use this to replicate `multi/exec` on `propagatePendingCommands`
function. The side effect of this change is that now the `select` command
will appear inside the `multi/exec` block on the replication stream (instead of
outside of the `multi/exec` block). Tests was modified to match this new behavior.
Make sure the script calls in the tests declare the keys they intend to use.
Do that with minimal changes to existing lines (so many scripts still have a hard coded key names)
Co-authored-by: Valentino Geron <valentino@redis.com>
This pr mainly has the following four changes:
1. Add missing lua_pop in `luaGetFromRegistry`.
This bug affects `redis.register_function`, where `luaGetFromRegistry` in
`luaRegisterFunction` will return null when we call `redis.register_function` nested.
.e.g
```
FUNCTION LOAD "#!lua name=mylib \n local lib=redis \n lib.register_function('f2', function(keys, args) lib.register_function('f1', function () end) end)"
fcall f2 0
````
But since we exit when luaGetFromRegistry returns null, it does not cause the stack to grow indefinitely.
3. When getting `REGISTRY_RUN_CTX_NAME` from the registry, use `serverAssert`
instead of error return. Since none of these lua functions are registered at the time
of function load, scriptRunCtx will never be NULL.
4. Add `serverAssert` for `luaLdbLineHook`, `luaEngineLoadHook`.
5. Remove `luaGetFromRegistry` from `redis_math_random` and
`redis_math_randomseed`, it looks like they are redundant.
some skip tags were missing on some tests
avoid using HELLO if denytags has resp3 (target server may not support it)
Co-authored-by: Valentino Geron <valentino@redis.com>
`bitfield` with `get` may not be readonly.
```
127.0.0.1:6384> acl setuser hello on nopass %R~* +@all
OK
127.0.0.1:6384> auth hello 1
OK
127.0.0.1:6384> bitfield hello set i8 0 1
(error) NOPERM this user has no permissions to access one of the keys used as arguments
127.0.0.1:6384> bitfield hello set i8 0 1 get i8 0
1) (integer) 0
2) (integer) 1
```
Co-authored-by: Oran Agra <oran@redislabs.com>
This is the history of aof-race related changes:
1. added in 3aa4b00970
2. disabled in dcdfd005a0
3. enabled in 5c63922691
4. disabled in 53a2af3941
This PR refreshes the aof-race test, re-enable it.
Closes#10971
* some of the tests don't clean the key the use
* marked tests with `{singledb:skip}` if they use SELECT
Co-authored-by: Valentino Geron <valentino@redis.com>
There is a -Wimplicit-function-declaration warning in here:
```
keyspace_events.c: In function ‘KeySpace_NotificationGeneric’:
keyspace_events.c:67:9: warning: implicit declaration of function ‘usleep’; did you mean ‘sleep’? [-Wimplicit-function-declaration]
67 | usleep(1);
| ^~~~~~
| sleep
```
The kill above is sometimes successful and sometimes already too late.
The PING in pysnc wrong offset test got rejected by bgsaveerr because
lastbgsave_status is C_ERR.
In theory, using diskless can avoid PING being affected, because when
the replica is dropped, we will kill the child with SIGUSR1, and this
will not affect lastbgsave_status.
Anyway, this kill is not particularly needed here, dropping the kill
is the best one, since we do have the waitForBgsave, so just let it
take care of the bgsave. No need for fast termination.
RM_Microseconds
Return the wall-clock Unix time, in microseconds
RM_CachedMicroseconds
Returns a cached copy of the Unix time, in microseconds.
It is updated in the server cron job and before executing a command.
It is useful for complex call stacks, such as a command causing a
key space notification, causing a module to execute a RedisModule_Call,
causing another notification, etc.
It makes sense that all these callbacks would use the same clock.
Fix#11030, use lua_rawget to avoid triggering metatables.
#11030 shows how return `_G` from the Lua script (either function or eval), cause the
Lua interpreter to Panic and the Redis processes to exit with error code 1.
Though return `_G` only panic on Redis 7 and 6.2.7, the underline issue exists on older
versions as well (6.0 and 6.2). The underline issue is returning a table with a metatable
such that the metatable raises an error.
The following example demonstrate the issue:
```
127.0.0.1:6379> eval "local a = {}; setmetatable(a,{__index=function() foo() end}) return a" 0
Error: Server closed the connection
```
```
PANIC: unprotected error in call to Lua API (user_script:1: Script attempted to access nonexistent global variable 'foo')
```
The Lua panic happened because when returning the result to the client, Redis needs to
introspect the returning table and transform the table into a resp. In order to scan the table,
Redis uses `lua_gettable` api which might trigger the metatable (if exists) and might raise an error.
This code is not running inside `pcall` (Lua protected call), so raising an error causes the
Lua to panic and exit. Notice that this is not a crash, its a Lua panic that exit with error code 1.
Returning `_G` panics on Redis 7 and 6.2.7 because on those versions `_G` has a metatable
that raises error when trying to fetch a none existing key.
### Solution
Instead of using `lua_gettable` that might raise error and cause the issue, use `lua_rawget`
that simply return the value from the table without triggering any metatable logic.
This is promised not to raise and error.
The downside of this solution is that it might be considered as breaking change, if someone
rely on metatable in the returned value. An alternative solution is to wrap this entire logic
with `pcall` (Lua protected call), this alternative require a much bigger refactoring.
### Back Porting
The same fix will work on older versions as well (6.2, 6.0). Notice that on those version,
the issue can cause Redis to crash if inside the metatable logic there is an attempt to accesses
Redis (`redis.call`). On 7.0, there is not crash and the `redis.call` is executed as if it was done
from inside the script itself.
### Tests
Tests was added the verify the fix
Gossip the cluster node blacklist in ping and pong messages.
This means that CLUSTER FORGET doesn't need to be sent to all nodes in a cluster.
It can be sent to one or more nodes and then be propagated to the rest of them.
For each blacklisted node, its node id and its remaining blacklist TTL is gossiped in a
cluster bus ping extension (introduced in #9530).
A timing issue like this was reported in freebsd daily CI:
```
*** [err]: Sanity test push cmd after resharding in tests/unit/cluster/cli.tcl
Expected 'CLUSTERDOWN The cluster is down' to match '*MOVED*'
```
We additionally wait for each node to reach a consensus on the cluster
state in wait_for_condition to avoid the cluster down error.
The fix just like #10495, quoting madolson's comment:
Cluster check just verifies the the config state is self-consistent,
waiting for cluster_state to be okay is an independent check that all
the nodes actually believe each other are healthy.
At the same time i noticed that unit/moduleapi/cluster.tcl has an exact
same test, may have the same problem, also modified it.
The temporary array for deleted entries reply of XAUTOCLAIM was
insufficient, but also in fact the COUNT argument should be used to
control the size of the reply, so instead of terminating the loop by
only counting the claimed entries, we'll count deleted entries as well.
Fix#10968
Addresses CVE-2022-31144
replace use of:
sprintf --> snprintf
strcpy/strncpy --> redis_strlcpy
strcat/strncat --> redis_strlcat
**why are we making this change?**
Much of the code uses some unsafe variants or deprecated buffer handling
functions.
While most cases are probably not presenting any issue on the known path
programming errors and unterminated strings might lead to potential
buffer overflows which are not covered by tests.
**As part of this PR we change**
1. added implementation for redis_strlcpy and redis_strlcat based on the strl implementation: https://linux.die.net/man/3/strl
2. change all occurrences of use of sprintf with use of snprintf
3. change occurrences of use of strcpy/strncpy with redis_strlcpy
4. change occurrences of use of strcat/strncat with redis_strlcat
5. change the behavior of ll2string/ull2string/ld2string so that it will always place null
termination ('\0') on the output buffer in the first index. this was done in order to make
the use of these functions more safe in cases were the user will not check the output
returned by them (for example in rdbRemoveTempFile)
6. we added a compiler directive to issue a deprecation error in case a use of
sprintf/strcpy/strcat is found during compilation which will result in error during compile time.
However keep in mind that since the deprecation attribute is not supported on all compilers,
this is expected to fail during push workflows.
**NOTE:** while this is only an initial milestone. We might also consider
using the *_s implementation provided by the C11 Extensions (however not
yet widly supported). I would also suggest to start
looking at static code analyzers to track unsafe use cases.
For example LLVM clang checker supports security.insecureAPI.DeprecatedOrUnsafeBufferHandling
which can help locate unsafe function usage.
https://clang.llvm.org/docs/analyzer/checkers.html#security-insecureapi-deprecatedorunsafebufferhandling-c
The main reason not to onboard it at this stage is that the alternative
excepted by clang is to use the C11 extensions which are not always
supported by stdlib.
In the newly added cluster hostnames test, the primary is failing over during the reboot
for valgrind so we are validating the wrong node. This change just sets the replica to
prevent taking over, which seems to fix the test.
We could have also set the timeout higher, but it slows down the test.
The corrupt dump fuzzer uncovered a valgrind warning saying:
```
==76370== Argument 'size' of function malloc has a fishy (possibly negative) value: -3744781444216323815
```
This allocation would have failed (returning NULL) and being handled properly by redis (even before this change), but we also want to silence the valgrind warnings (which are checking that casting to ssize_t produces a non-negative value).
The solution i opted for is to explicitly fail these allocations (returning NULL), before even reaching `malloc` (which would have failed and return NULL too).
The implication is that we will not be able to support a single allocation of more than 2GB on a 32bit system (which i don't think is a realistic scenario).
i.e. i do think we could be facing cases were redis consumes more than 2gb on a 32bit system, but not in a single allocation.
The byproduct of this, is that i dropped the overflow assertions, since these will now lead to the same OOM panic we have for failed allocations.
#10942 break the new test added in #10449
```
Testing unit: 29-slot-migration-response.tcl
Cluster Join and auto-discovery test: FAILED: Cluster failed to join into a full mesh.
```
It looks like we need to wait for the cluster in 28 to become stable.
In #9389, we add a new `cluster-port` config and make cluster bus port configurable,
and currently redis-cli --cluster create/add-node doesn't support with a configurable `cluster-port` instance.
Because redis-cli uses the old way (port + 10000) to send the `CLUSTER MEET` command.
Now we add this support on redis-cli `--cluster`, note we don't need to explicitly pass in the
`cluster-port` parameter, we can get the real `cluster-port` of the node in `clusterManagerNodeLoadInfo`,
so the `--cluster create` and `--cluster add-node` interfaces have not changed.
We will use the `cluster-port` when we are doing `CLUSTER MEET`, also note that `CLUSTER MEET` bus-port
parameter was added in 4.0, so if the bus_port (the one in redis-cli) is 0, or equal (port + 10000),
we just call `CLUSTER MEET` with 2 arguments, using the old form.
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
Account sharded pubsub channels memory consumption in client memory usage
computation to accurately evict client based on the set threshold for `maxmemory-clients`.
This was harmless because we marked the parent command
with SENTINEL flag. So the populateCommandTable was ok.
And we also don't show the flag (SENTINEL and ONLY-SENTNEL)
in COMMAND INFO.
In this PR, we also add the same CMD_SENTINEL and CMD_ONLY_SENTINEL
flags check when populating the sub-commands.
so that in the future it'll be possible to add some sub-commands to sentinel or sentinel-only but not others.
Fix regression of CLUSTER RESET command in redis 7.0.
cluster reset command format is:
CLUSTER RESET [ HARD | SOFT]
According to the cluster reset command doc and codes, the third argument is optional, so
the arity in json file should be -2 instead of 3.
Add test to verify future regressions with RESET and RESET SOFT that were not covered.
Co-authored-by: Ubuntu <lucas.guang.yang1@huawei.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Binbin <binloveplay1314@qq.com>
When calling CLIENT INFO/LIST, and in various debug prints, Redis is printing
the number of pubsub channels / patterns the client is subscribed to.
With the addition of sharded pubsub, it would be useful to print the number of
keychannels the client is subscribed to as well.
The module API docs mentions this macro, but it was not defined (so no one could have used it).
Instead of adding it as is, we decided to add a _V1 macro, so that if / when we some day extend this struct,
modules that use this API and don't need the extra fields, will still use the old version
and still be compatible with older redis version (despite being compiled with newer redismodule.h)
Since the ranges of `unsigned long long` and `long long` are different, we cannot read an
`unsigned long long` integer from a `RedisModuleString` by `RedisModule_StringToLongLong` .
So I added two new Redis Module APIs to support the conversion between these two types:
* `RedisModule_StringToULongLong`
* `RedisModule_CreateStringFromULongLong`
Signed-off-by: RinChanNOWWW <hzy427@gmail.com>
This commit has two topics.
## Passing config name and value in the same arg
In #10660 (Redis 7.0.1), when we supported the config values that can start with `--` prefix (one of the two topics of that PR),
we broke another pattern: `redis-server redis.config "name value"`, passing both config name
and it's value in the same arg, see #10865
This wasn't a intended change (i.e we didn't realize this pattern used to work).
Although this is a wrong usage, we still like to fix it.
Now we support something like:
```
src/redis-server redis.conf "--maxmemory '700mb'" "--maxmemory-policy volatile-lru" --proc-title-template --my--title--template --loglevel verbose
```
## Changes around --save
Also in this PR, we undo the breaking change we made in #10660 on purpose.
1. `redis-server redis.conf --save --loglevel verbose` (missing `save` argument before anotehr argument).
In 7.0.1, it was throwing an wrong arg error.
Now it will work and reset the save, similar to how it used to be in 7.0.0 and 6.2.x.
3. `redis-server redis.conf --loglevel verbose --save` (missing `save` argument as last argument).
In 6.2, it did not reset the save, which was a bug (inconsistent with the previous bullet).
Now we will make it work and reset the save as well (a bug fix).
The new test added in #10891 can fail with a different error.
see comment in networking.c saying
```c
/* That's a best effort error message, don't check write errors.
* Note that for TLS connections, no handshake was done yet so nothing
* is written and the connection will just drop. */
```
my maxclients config:
```
redis-cli config get maxclients
1) "maxclients"
2) "4064"
```
Before this bug was fixed, creating 4065 clients appeared to be successful, but only 4064 were actually created```
```
./redis-benchmark -c 4065 -I
Creating 4065 idle connections and waiting forever (Ctrl+C when done)
cients: 4065
```
now :
```
./redis-benchmark -c 4065 -I
Creating 4065 idle connections and waiting forever (Ctrl+C when done)
Error from server: ERR max number of clients reached
./redis-benchmark -c 4064 -I
Creating 4064 idle connections and waiting forever (Ctrl+C when done)
clients: 4064
```
The PR fixes 2 issues:
### RM_Call crash on script mode
`RM_Call` can potentially be called from a background thread where `server.current_client`
are not set. In such case we get a crash on `NULL` dereference.
The fix is to check first if `server.current_client` is `NULL`, if it does we should
verify disc errors and readonly replica as we do to any normal clients (no masters nor AOF).
### RM_Call block OOM commands when not needed
Again `RM_Call` can be executed on a background thread using a `ThreadSafeCtx`.
In such case `server.pre_command_oom_state` can be irrelevant and should not be
considered when check OOM state. This cause OOM commands to be blocked when
not necessarily needed.
In such case, check the actual used memory (and not the cached value). Notice that in
order to know if the cached value can be used, we check that the ctx that was used on
the `RM_Call` is a ThreadSafeCtx. Module writer can potentially abuse the API and use
ThreadSafeCtx on the main thread. We consider this as a API miss used.
when we know the size of the zset we're gonna store in advance,
we can check if it's greater than the listpack encoding threshold,
in which case we can create a skiplist from the get go, and avoid
converting the listpack to skiplist later after it was already populated.
If a script made a modification and then was interrupted for taking too long.
there's a chance redis will detect that a replica dropped and would like to reject
write commands with NOREPLICAS due to insufficient good replicas.
returning an error on a command in this case breaks the script atomicity.
The same could in theory happen with READONLY, MISCONF, but i don't think
these state changes can happen during script execution.
I noticed that scripting.tcl uses INFO from within a script and thought it's an
overkill and concluded it's nicer to use another CMD_STALE command,
decided to use ECHO, and then noticed it's not at all allowed in stale mode.
probably overlooked at #6843
The SET and BITFIELD command were added `get_keys_function` in #10148, causing
them to be wrongly marked movablekeys in `populateCommandMovableKeys`.
This was an unintended side effect introduced in #10148 (7.0 RC1)
which could cause some clients an extra round trip for these commands in cluster mode.
Since we define movablekeys as a way to determine if the legacy range [first, last, step]
doesn't find all keys, then we need a completely different approach.
The right approach should be to check if the legacy range covers all key-specs,
and if none of the key-specs have the INCOMPLETE flag.
This way, we don't need to look at getkeys_proc of VARIABLE_FLAG at all.
Probably with the exception of modules, who may still not be using key-specs.
In this PR, we removed `populateCommandMovableKeys` and put its logic in
`populateCommandLegacyRangeSpec`.
In order to properly serve both old and new modules, we must probably keep relying
CMD_MODULE_GETKEYS, but do that only for modules that don't declare key-specs.
For ones that do, we need to take the same approach we take with native redis commands.
This approach was proposed by Oran. Fixes#10833
Co-authored-by: Oran Agra <oran@redislabs.com>
The test calls `ldd` on `redis-server` in order to find out whether the binary
was linked against `libmusl`; However, `ldd` returns a value different from `0`
when statically linking the binaries agains libc-musl, because `redis-server` is
not a dynamic executable (as given by the exception thrown by the failing test),
and `make test` terminates with an error::
$ ldd src/redis-server
not a dynamic executable
$ echo $?
1
This commit fixes the test by ignoring such failures.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
This change fixes failing `integration/logging.tcl` test in Gentoo with
musl libc, where `ldd` returns
```
libc.so => /lib/ld-musl-x86_64.so.1 (0x7f9d5f171000)
```
unlike Alpine's
```
libc.musl-x86_64.so.1 => /lib/ld-musl-x86_64.so.1 (0x7f82cfa16000)
```
The solution is to extend matching pattern introduced in #8532.
Redis 7 adds some new alias config like `hash-max-listpack-entries` alias `hash-max-ziplist-entries`.
If a config file contains both real name and alias like this:
```
hash-max-listpack-entries 20
hash-max-ziplist-entries 20
```
after set `hash-max-listpack-entries` to 100 and `config rewrite`, the config file becomes to:
```
hash-max-listpack-entries 100
hash-max-ziplist-entries 20
```
we can see that the alias config is not modified, and users will get wrong config after restart.
6.0 and 6.2 doesn't have this bug, since they only have the `slave` word alias.
Co-authored-by: Oran Agra <oran@redislabs.com>
A regression from #10285 (redis 7.0).
CONFIG REWRITE would put lines with: `include`, `rename-command`,
`user`, `loadmodule`, and any module specific config in a comment.
For ACL `user`, `loadmodule` and module specific configs would be
re-inserted at the end (instead of updating existing lines), so the only
implication is a messy config file full of comments.
But for `rename-command` and `include`, the implication would be that
they're now missing, so a server restart would lose them.
Co-authored-by: Oran Agra <oran@redislabs.com>
The important part is that read-only scripts (not just EVAL_RO
and FCALL_RO, but also ones with `no-writes` executed by normal EVAL or
FCALL), will now be permitted to run during CLIENT PAUSE WRITE (unlike
before where only the _RO commands would be processed).
Other than that, some errors like OOM, READONLY, MASTERDOWN are now
handled by processCommand, rather than the command itself affects the
error string (and even error code in some cases), and command stats.
Besides that, now the `may-replicate` commands, PFCOUNT and PUBLISH, will
be considered `write` commands in scripts and will be blocked in all
read-only scripts just like other write commands.
They'll also be blocked in EVAL_RO (i.e. even for scripts without the
`no-writes` shebang flag.
This commit also hides the `may_replicate` flag from the COMMAND command
output. this is a **breaking change**.
background about may_replicate:
We don't want to expose a no-may-replicate flag or alike to scripts, since we
consider the may-replicate thing an internal concern of redis, that we may
some day get rid of.
In fact, the may-replicate flag was initially introduced to flag EVAL: since
we didn't know what it's gonna do ahead of execution, before function-flags
existed). PUBLISH and PFCOUNT, both of which because they have side effects
which may some day be fixed differently.
code changes:
The changes in eval.c are mostly code re-ordering:
- evalCalcFunctionName is extracted out of evalGenericCommand
- evalExtractShebangFlags is extracted luaCreateFunction
- evalGetCommandFlags is new code
* Fix broken protocol when redis can't persist to RDB (general commands, not
modules), excessive newline. regression of #10372 (7.0 RC3)
* Fix broken protocol when Redis can't persist to AOF (modules and
scripts), missing newline.
* Fix bug in OOM check of EVAL scripts called from RM_Call.
set the cached OOM state for scripts before executing module commands too,
so that it can serve scripts that are executed by modules.
i.e. in the past EVAL executed by RM_Call could have either falsely
fail or falsely succeeded because of a wrong cached OOM state flag.
* Fix bugs with RM_Yield:
1. SHUTDOWN should only accept the NOSAVE mode
2. Avoid eviction during yield command processing.
3. Avoid processing master client commands while yielding from another client
* Add new two more checks to RM_Call script mode.
1. READONLY You can't write against a read only replica
2. MASTERDOWN Link with MASTER is down and `replica-serve-stale-data` is set to `no`
* Add new RM_Call flag to let redis automatically refuse `deny-oom` commands
while over the memory limit.
* Add tests to cover various errors from Scripts, Modules, Modules
calling scripts, and Modules calling commands in script mode.
Add tests:
* Looks like the MISCONF error was completely uncovered by the tests,
add tests for it, including from scripts, and modules
* Add tests for NOREPLICAS from scripts
* Add tests for the various errors in module RM_Call, including RM_Call that
calls EVAL, and RM_call in "eval mode". that includes:
NOREPLICAS, READONLY, MASTERDOWN, MISCONF
To easily distinguish between sharded channel message and a global
channel message, introducing `smessage` (instead of `message`) as
message bulk for sharded channel publish message.
This is gonna be a breaking change in 7.0.1!
Background:
Sharded pubsub introduced in redis 7.0, but after the release we quickly
realized that the fact that it's problematic that the client can't distinguish
between normal (global) pubsub messages and sharded ones.
This is important because the same connection can subscribe to both,
but messages sent to one pubsub system are not propagated to the
other (they're completely separate), so if one connection is used to
subscribe to both, we need to assist the client library to know which
message it got so it can forward it to the correct callback.
There is a timing issue reported in test-sanitizer-address (gcc):
```
Sentinels (re)connection following SENTINEL SET mymaster auth-pass:
FAILED: Expected to be disconnected from master due to wrong password
```
The reason we reach it, is because the test is fast enough to modify
auth-pass and test sentinel connection status with the server,
before its scheduled operation got the chance to update connection
status with the server.
We need to wait for `sentinelTimer` to kick in, and then update the
connection status. Replace condition with wait_for_condition on the check.
Fix just like #10480 did
When `zrangestore` is called container destination object is created.
Before this PR we used to create a listpack based object even if `zset-max-ziplist-entries`
or equivalent`zset-max-listpack-entries` was set to 0.
This triggered immediate conversion of the listpack into a skiplist in `zrangestore`, which hits
an assertion resulting in an engine crash.
Added a TCL test that reproduces this issue.
This bug was introduced in #9484 (7.0.0).
It result that BZMPOP blocked on non-key arguments.
Like `bzmpop 0 1 myzset min count 10`, this command will additionally
block in these keys (except for the first and the last argument) and can return their values:
- 0: timeout value
- 1: numkeys value
- min: min/max token
- count: count token
Scripts that have the `no-writes` flag, cannot execute write commands,
and since all `deny-oom` commands are write commands, we now act
as if the `allow-oom` flag is implicitly set for scripts that set the `no-writes` flag.
this also implicitly means that the EVAL*_RO and FCALL_RO commands can
never fails with OOM error.
Note about a bug that's no longer relevant:
There was an issue with EVAL*_RO using shebang not being blocked correctly
in OOM state:
When an EVAL script declares a shebang, it was by default not allowed to run in
OOM state.
but this depends on a flag that is updated before the command is executed, which
was not updated in case of the `_RO` variants.
the result is that if the previous cached state was outdated (either true or false),
the script will either unjustly fail with OOM, or unjustly allowed to run despite
the OOM state.
It doesn't affect scripts without a shebang since these depend on the actual
commands they run, and since these are only read commands, they don't care
for that cached oom state flag.
it did affect scripts with shebang and no allow-oom flag, bug after the change in
this PR, scripts that are run with eval_ro would implicitly have that flag so again
the cached state doesn't matter.
p.s. this isn't a breaking change since all it does is allow scripts to run when they
should / could rather than blocking them.
Updated the comments for:
info command
lmpopCommand and blmpopCommand
sinterGenericCommand
Fix the missing "key" words in the srandmemberCommand function
For LPOS command, when rank is 0, prompt user that rank could be
positive number or negative number, and add a test for it
The purpose of the test is to kill the child while it is running.
From the last two lines we can see the child exits before being killed.
```
- Module fork started pid: 56998
* <fork> fork child started
- Killing running module fork child: 56998
* <fork> fork child exiting
signal-handler (1652267501) Received SIGUSR1 in child, exiting now.
```
In this commit, we pass an argument to `fork.create` indicating how
long it should sleep. For the fork kill test, we use a longer time to
avoid the child exiting before being killed.
Other changes:
use wait_for_condition instead of hardcoded `after 250`.
Unify the test for failing fork with the one for killing it (save time)
## Take one bulk string with spaces for MULTI_ARG configs parsing
Currently redis-server looks for arguments that start with `--`,
and anything in between them is considered arguments for the config.
like: `src/redis-server --shutdown-on-sigint nosave force now --port 6380`
MULTI_ARG configs behave differently for CONFIG command, vs the command
line argument for redis-server.
i.e. CONFIG command takes one bulk string with spaces in it, while the
command line takes an argv array with multiple values.
In this PR, in config.c, if `argc > 1` we can take them as is,
and if the config is a `MULTI_ARG` and `argc == 1`, we will split it by spaces.
So both of these will be the same:
```
redis-server --shutdown-on-sigint nosave force now --shutdown-on-sigterm nosave force
redis-server --shutdown-on-sigint nosave "force now" --shutdown-on-sigterm nosave force
redis-server --shutdown-on-sigint nosave "force now" --shutdown-on-sigterm "nosave force"
```
## Allow options value to use the `--` prefix
Currently it decides to switch to the next config, as soon as it sees `--`,
even if there was not a single value provided yet to the last config,
this makes it impossible to define a config value that has `--` prefix in it.
For instance, if we want to set the logfile to `--my--log--file`,
like `redis-server --logfile --my--log--file --loglevel verbose`,
current code will handle that incorrectly.
In this PR, now we allow a config value that has `--` prefix in it.
**But note that** something like `redis-server --some-config --config-value1 --config-value2 --loglevel debug`
would not work, because if you want to pass a value to a config starting with `--`, it can only be a single value.
like: `redis-server --some-config "--config-value1 --config-value2" --loglevel debug`
An example (using `--` prefix config value):
```
redis-server --logfile --my--log--file --loglevel verbose
redis-cli config get logfile loglevel
1) "loglevel"
2) "verbose"
3) "logfile"
4) "--my--log--file"
```
### Potentially breaking change
`redis-server --save --loglevel verbose` used to work the same as `redis-server --save "" --loglevel verbose`
now, it'll error!
## FLUSHALL
We used to restore the dirty counter after `rdbSave` zeroed it if we enable save.
Otherwise FLUSHALL will not be replicated nor put into the AOF.
And then we do increment it again below.
Without that extra dirty++, when db was already empty, FLUSHALL
will not be replicated nor put into the AOF.
We now gonna replace all that dirty counter magic with a call
to forceCommandPropagation (REPL and AOF), instead of all the
messing around with the dirty counter.
Added tests to cover three part (dirty counter, REPL, AOF).
One benefit other than cleaner code is that the `rdb_changes_since_last_save` is correct in this case.
## FLUSHDB
FLUSHDB was not replicated nor put into the AOF when db was already empty.
Unlike DEL on a non-existing key, FLUSHDB always does something, and that's to call the module hook.
So basically FLUSHDB is never a NOP, and thus it should always be propagated.
Not doing that, could mean that if a module does something in that hook, and wants to
avoid issues of that hook being missing on the replica if the db is empty, it'll need to do complicated things.
So now FLUSHDB add call forceCommandPropagation, we will always propagate FLUSHDB.
Always propagating FLUSHDB seems like a safe approach that shouldn't have any drawbacks (other than looking odd)
This was mentioned in #8972
## Test section:
We actually found it while solving a race condition in the BGSAVE test (other.tcl).
It was found in extra_ci Daily Arm64 (test-libc-malloc).
```
[exception]: Executing test client: ERR Background save already in progress.
ERR Background save already in progress
```
It look like `r flushdb` trigger (schedule) a bgsave right after `waitForBgsave r` and before `r save`.
Changing flushdb to flushall, FLUSHALL will do a foreground save and then set the dirty counter to 0.
Set `old_li` to NULL to avoid linking it again on error.
Before the fix, loading an already existing library will cause the existing library to be added again. This cause not harm other then wrong statistics. The statistics that are effected by the issue are:
* `libraries_count` and `functions_count` returned by `function stats` command
* `used_memory_functions` returned on `info memory` command
* `functions.caches` returned on `memory stats` command
Unintentional change in #9644 (since RC1) meant that an empty `--save ""` config
from command line, wouldn't have clear any setting from the config file
Added tests to cover that, and improved test infra to take additional
command line args for redis-server
If we want to support bits that can be overlapping, we need to make sure
that:
1. we don't use the same bit for two return values.
2. values should be sorted so that prefer ones (matching more
bits) come first.
When user uses the same input key for SDIFF as the first one, the result must be empty, so we don't need to process the elements to test.
This method is like the one done in zset‘s `zsetChooseDiffAlgorithm`
Co-authored-by: Oran Agra <oran@redislabs.com>
The white list is done by setting a metatable on the global table before initializing
any library. The metatable set the `__newindex` field to a function that check
the white list before adding the field to the table. Fields which is not on the
white list are simply ignored.
After initialization phase is done we protect the global table and each table
that might be reachable from the global table. For each table we also protect
the table metatable if exists.
Use the new `lua_enablereadonlytable` Lua API to protect the global tables of
both evals scripts and functions. For eval scripts, the implemetation is easy,
We simply call `lua_enablereadonlytable` on the global table to turn it into
a readonly table.
On functions its more complecated, we want to be able to switch globals between
load run and function run. To achieve this, we create a new empty table that
acts as the globals table for function, we control the actual globals using metatable
manipulation. Notice that even if the user gets a pointer to the original tables, all
the tables are set to be readonly (using `lua_enablereadonlytable` Lua API) so he can
not change them. The following inlustration better explain the solution:
```
Global table {} <- global table metatable {.__index = __real_globals__}
```
The `__real_globals__` is set depends on the run context (function load or function call).
Why this solution is needed and its not enough to simply switch globals?
When we run in the context of function load and create our functions, our function gets
the current globals that was set when they were created. Replacing the globals after
the creation will not effect them. This is why this trick it mandatory.
Enables registration of an enum config that'll let the user pass multiple keywords that
will be combined with `|` as flags into the integer config value.
```
const char *enum_vals[] = {"none", "one", "two", "three"};
const int int_vals[] = {0, 1, 2, 4};
if (RedisModule_RegisterEnumConfig(ctx, "flags", 3, REDISMODULE_CONFIG_DEFAULT | REDISMODULE_CONFIG_BITFLAGS, enum_vals, int_vals, 4, getFlagsConfigCommand, setFlagsConfigCommand, NULL, NULL) == REDISMODULE_ERR) {
return REDISMODULE_ERR;
}
```
doing:
`config set moduleconfigs.flags "two three"` will result in 6 being passed to`setFlagsConfigCommand`.
Changes:
- When AOF is enabled **after** startup, the data accumulated during `AOF_WAIT_REWRITE`
will only be stored in a temp INCR AOF file. Only after the first AOFRW is successful, we will
add it to manifest file.
Before this fix, the manifest referred to the temp file which could cause a restart during that
time to load it without it's base.
- Add `aof_rewrites_consecutive_failures` info field for aofrw limiting implementation.
Now we can guarantee that these behaviors of MP-AOF are the same as before (past redis releases):
- When AOF is enabled after startup, the data accumulated during `AOF_WAIT_REWRITE` will only
be stored in a visible place. Only after the first AOFRW is successful, we will add it to manifest file.
- When disable AOF, we did not delete the AOF file in the past so there's no need to change that
behavior now (yet).
- When toggling AOF off and then on (could be as part of a full-sync), a crash or restart before the
first rewrite is completed, would result with the previous version being loaded (might not be right thing,
but that's what we always had).
The SHUTDOWN command has various flags to change it's default behavior,
but in some cases establishing a connection to redis is complicated and it's easier
for the management software to use signals. however, so far the signals could only
trigger the default shutdown behavior.
Here we introduce the option to control shutdown arguments for SIGTERM and SIGINT.
New config options:
`shutdown-on-sigint [nosave | save] [now] [force]`
`shutdown-on-sigterm [nosave | save] [now] [force]`
Implementation:
Support MULTI_ARG_CONFIG on createEnumConfig to support multiple enums to be applied as bit flags.
Co-authored-by: Oran Agra <oran@redislabs.com>
* Till now, replicas that were unable to persist, would still execute the commands
they got from the master, now they'll panic by default, and we add a new
`replica-ignore-disk-errors` config to change that.
* Till now, when a command failed on a replica or AOF-loading, it only logged a
warning and a stat, we add a new `propagation-error-behavior` config to allow
panicking in that state (may become the default one day)
Note that commands that fail on the replica can either indicate a bug that could
cause data inconsistency between the replica and the master, or they could be
in some cases (specifically in previous versions), a result of a command (e.g. EVAL)
that failed on the master, but still had to be propagated to fail on the replica as well.
Adds the `allow-cross-slot-keys` flag to Eval scripts and Functions to allow
scripts to access keys from multiple slots.
The default behavior is now that they are not allowed to do that (unlike before).
This is a breaking change for 7.0 release candidates (to be part of 7.0.0), but
not for previous redis releases since EVAL without shebang isn't doing this check.
Note that the check is done on both the keys declared by the EVAL / FCALL command
arguments, and also the ones used by the script when making a `redis.call`.
A note about the implementation, there seems to have been some confusion
about allowing access to non local keys. I thought I missed something in our
wider conversation, but Redis scripts do block access to non-local keys.
So the issue was just about cross slots being accessed.
1. Disk error and slave count checks didn't flag the transactions or counted correctly in command stats (regression from #10372 , 7.0 RC3)
2. RM_Call will reply the same way Redis does, in case of non-exisitng command or arity error
3. RM_WrongArtiy will consider the full command name
4. Use lowercase 'u' in "unknonw subcommand" (to align with "unknown command")
Followup work of #10127
This case is interesting because it originates from cron,
rather than from another command.
The idea came from looking at #9890 and #10573, and I was wondering if RM_Call
would work properly when `server.current_client == NULL`
* Fix timing issue in slowlog redact test
This test failed once in my daily CI (test-sanitizer-address (clang))
```
*** [err]: SLOWLOG - Some commands can redact sensitive fields in tests/unit/slowlog.tcl
Expected 'migrate 127.0.0.1 25649 key 9 5000 AUTH2 (redacted) (redacted)' to match '* key 9 5000 AUTH (redacted)' (context: type eval line 12 cmd {assert_match {* key 9 5000 AUTH (redacted)} [lindex [lindex [r slowlog get] 1] 3]} proc ::test)
```
The reason is that with slowlog-log-slower-than 10000,
slowlog get will have a chance to exceed 10ms.
Change slowlog-log-slower-than from 10000 to -1, disable it.
Also handles a same potentially problematic test above.
This is actually the same timing issue as #10432.
But also avoid repeated calls to `SLOWLOG GET`
Add a configuration option to attach an operating system-specific identifier to Redis sockets, supporting advanced network configurations using iptables (Linux) or ipfw (FreeBSD).
RM_Yield was missing a call to protectClient to prevent redis from
processing future commands of the yielding client.
Adding tests that fail without this fix.
This would be complicated to solve since nested calls to RM_Call used to
replace the current_client variable with the module temp client.
It looks like it's no longer necessary to do that, since it was added
back in #9890 to solve two issues, both already gone:
1. call to CONFIG SET maxmemory could trigger a module hook calling
RM_Call. although this specific issue is gone, arguably other hooks
like keyspace notification, can do the same.
2. an assertion in lookupKey that checks the current command of the
current client, introduced in #9572 and removed in #10248
since PUBLISH and SPUBLISH use different dictionaries for channels and clients,
and we already have an API for PUBLISH, it only makes sense to have one for SPUBLISH
Add test coverage and unifying some test infrastructure.
The tests verify that loading a binary payload to the Lua interpreter raises an error.
The Lua code modification was done here: fdf9d45509
which force the Lau interpreter to always use the text parser.
Add APIs to allow modules to compute the memory consumption of opaque objects owned by redis.
Without these, the mem_usage callbacks of module data types are useless in many cases.
Other changes:
Fix streamRadixTreeMemoryUsage to include the size of the rax structure itself
By the convention of errors, there is supposed to be a space between the code and the name.
While looking at some lua stuff I noticed that interpreter errors were not adding the space,
so some clients will try to map the detailed error message into the error.
We have tests that hit this condition, but they were just checking that the string "starts" with ERR.
I updated some other tests with similar incorrect string checking. This isn't complete though, as
there are other ways we check for ERR I didn't fix.
Produces some fun output like:
```
# Errorstats
errorstat_ERR:count=1
errorstat_ERRuser_script_1_:count=1
```
Add an optional keyspace event when new keys are added to the db.
This is useful for applications where clients need to be aware of the redis keyspace.
Such an application can SCAN once at startup and then listen for "new" events (plus
others associated with DEL, RENAME, etc).
Allow specifying an ACL log reason, which is shown in the log. Right now it always shows "unknown", which is a little bit cryptic. This is a breaking change, but this API was added as part of 7 so it seems ok to stabilize it still.
Add field to COMMAND DOCS response to denote the name of the module
that added that command.
COMMAND LIST can filter by module, but if you get the full commands list,
you may still wanna know which command belongs to which module.
The alternative would be to do MODULE LIST, and then multiple calls to COMMAND LIST
The bug was when using REDISMODULE_YIELD_FLAG_CLIENTS.
in that case we would have only set the CLIENTS type flag in
server.busy_module_yield_flags and then clear that flag when exiting
RM_Yield, so we would never call unblockPostponedClients when the
context is destroyed.
This didn't really have any actual implication, which is why the tests
couldn't (and still can't) find that since the bug only happens when
using CLIENT, but in this case we won't have any clients to un-postpone
i.e. clients will get rejected with BUSY error, rather than being
postponed.
Unrelated:
* Adding tests for nested contexts, just in case.
* Avoid nested RM_Yield calls
Fixed a bug that used the `hincrbyfloat` or `hincrby` commands to make the field or value exceed the
`hash_max_listpack_value` but did not change the object encoding of the hash structure.
Add a length check for field and value, check the length of value first, if the length of value does not
exceed `hash_max_listpack_value` then check the length of field.
If the length of field or value is too long, it will reduce the efficiency of listpack, and the object encoding
will become hashtable after AOF restart, so this is also to keep the same before and after AOF restart.
Sentinel once in a while experience Sentinel TILT period or leader election
failure cycle. The problem is that those default timeout are too big and once
it happens, it breaks our tests. Suggesting:
- Reducing failover-timeout from 20 to 10sec (actually it is multiplied by 2
and reach 40sec of timeout)
- Modify tilt-period from default of 30sec to 5sec. When TILT period happens
it might lead to failover in our tests, and might cause also to failover cycle
cycle failure.
Sentinel tests should `wait_for_condition` up to 50seconds, where needed,
to be stable in case having single TILT period or failover failure cycle.
In addition relax timing configuration for "manual failover" Sentinel test
(was modified several months ago as part of an effort to reduce tests runtime)
## Move library meta data to be part of the library payload.
Following the discussion on https://github.com/redis/redis/issues/10429 and the intention to add (in the future) library versioning support, we believe that the entire library metadata (like name and engine) should be part of the library payload and not provided by the `FUNCTION LOAD` command. The reasoning behind this is that the programmer who developed the library should be the one who set those values (name, engine, and in the future also version). **It is not the responsibility of the admin who load the library into the database.**
The PR moves all the library metadata (engine and function name) to be part of the library payload. The metadata needs to be provided on the first line of the payload using the shebang format (`#!<engine> name=<name>`), example:
```lua
#!lua name=test
redis.register_function('foo', function() return 1 end)
```
The above script will run on the Lua engine and will create a library called `test`.
## API Changes (compare to 7.0 rc2)
* `FUNCTION LOAD` command was change and now it simply gets the library payload and extract the engine and name from the payload. In addition, the command will now return the function name which can later be used on `FUNCTION DELETE` and `FUNCTION LIST`.
* The description field was completely removed from`FUNCTION LOAD`, and `FUNCTION LIST`
## Breaking Changes (compare to 7.0 rc2)
* Library description was removed (we can re-add it in the future either as part of the shebang line or an additional line).
* Loading an AOF file that was generated by either 7.0 rc1 or 7.0 rc2 will fail because the old command syntax is invalid.
## Notes
* Loading an RDB file that was generated by rc1 / rc2 **is** supported, Redis will automatically add the shebang to the libraries payloads (we can probably delete that code after 7.0.3 or so since there's no need to keep supporting upgrades from an RC build).
If, for some reason, Redis decides not to execute the script, we need
to pop the function and error handler from Lua stack. Otherwise, eventually
the Lua stack will explode.
Relevant only for 7.0-rc1 and 7.0-rc2.
* Fix race condition where node loses its last slot and turns into replica
When a node has lost its last slot and finds out from the SETSLOT command
before the cluster bus PONG from the new owner arrives. In this case, the
node didn't turn itself into a replica of the new slot owner.
This commit adds the same logic to the SETSLOT command as already exists
for the cluster bus PONG processing.
* Revert "Fix new / failing cluster slot migration test (#10482)"
This reverts commit 0b21ef8d49.
In this test, the old slot owner finds out that it has lost its last
slot in a nondeterministic way. Either the cluster bus PONG from the
new slot owner and sometimes in a SETSLOT command from redis-cli. In
both cases, the result should be the same and the old owner should
turn itself into a replica of the new slot owner.
Fix global `strval` not reset to NULL after being freed, causing a crash on alpine
(most likely because the dynamic library loader doesn't init globals on reload)
By the way, fix the memory leak of using `RedisModule_Free` to free `RedisModuleString`,
and add a corresponding test.
During 11-manual-takeover.tcl, if the killing of the instances happens
too slowly, one of the replicas might be able to promote itself.
I'm not sure why it was slow, but it was observed taking 6 seconds
which is enough time to do an election.
I was able to verify the error locally by adding a small delay (1 second)
during ASAN CI. A fix is just to disable automated failover until all the
nodes are confirmed dead.
This feature adds the ability to add four different types (Bool, Numeric,
String, Enum) of configurations to a module to be accessed via the redis
config file, and the CONFIG command.
**Configuration Names**:
We impose a restriction that a module configuration always starts with the
module name and contains a '.' followed by the config name. If a module passes
"config1" as the name to a register function, it will be registered as MODULENAME.config1.
**Configuration Persistence**:
Module Configurations exist only as long as a module is loaded. If a module is
unloaded, the configurations are removed.
There is now also a minimal core API for removal of standardConfig objects
from configs by name.
**Get and Set Callbacks**:
Storage of config values is owned by the module that registers them, and provides
callbacks for Redis to access and manipulate the values.
This is exposed through a GET and SET callback.
The get callback returns a typed value of the config to redis. The callback takes
the name of the configuration, and also a privdata pointer. Note that these only
take the CONFIGNAME portion of the config, not the entire MODULENAME.CONFIGNAME.
```
typedef RedisModuleString * (*RedisModuleConfigGetStringFunc)(const char *name, void *privdata);
typedef long long (*RedisModuleConfigGetNumericFunc)(const char *name, void *privdata);
typedef int (*RedisModuleConfigGetBoolFunc)(const char *name, void *privdata);
typedef int (*RedisModuleConfigGetEnumFunc)(const char *name, void *privdata);
```
Configs must also must specify a set callback, i.e. what to do on a CONFIG SET XYZ 123
or when loading configurations from cli/.conf file matching these typedefs. *name* is
again just the CONFIGNAME portion, *val* is the parsed value from the core,
*privdata* is the registration time privdata pointer, and *err* is for providing errors to a client.
```
typedef int (*RedisModuleConfigSetStringFunc)(const char *name, RedisModuleString *val, void *privdata, RedisModuleString **err);
typedef int (*RedisModuleConfigSetNumericFunc)(const char *name, long long val, void *privdata, RedisModuleString **err);
typedef int (*RedisModuleConfigSetBoolFunc)(const char *name, int val, void *privdata, RedisModuleString **err);
typedef int (*RedisModuleConfigSetEnumFunc)(const char *name, int val, void *privdata, RedisModuleString **err);
```
Modules can also specify an optional apply callback that will be called after
value(s) have been set via CONFIG SET:
```
typedef int (*RedisModuleConfigApplyFunc)(RedisModuleCtx *ctx, void *privdata, RedisModuleString **err);
```
**Flags:**
We expose 7 new flags to the module, which are used as part of the config registration.
```
#define REDISMODULE_CONFIG_MODIFIABLE 0 /* This is the default for a module config. */
#define REDISMODULE_CONFIG_IMMUTABLE (1ULL<<0) /* Can this value only be set at startup? */
#define REDISMODULE_CONFIG_SENSITIVE (1ULL<<1) /* Does this value contain sensitive information */
#define REDISMODULE_CONFIG_HIDDEN (1ULL<<4) /* This config is hidden in `config get <pattern>` (used for tests/debugging) */
#define REDISMODULE_CONFIG_PROTECTED (1ULL<<5) /* Becomes immutable if enable-protected-configs is enabled. */
#define REDISMODULE_CONFIG_DENY_LOADING (1ULL<<6) /* This config is forbidden during loading. */
/* Numeric Specific Configs */
#define REDISMODULE_CONFIG_MEMORY (1ULL<<7) /* Indicates if this value can be set as a memory value */
```
**Module Registration APIs**:
```
int (*RedisModule_RegisterBoolConfig)(RedisModuleCtx *ctx, char *name, int default_val, unsigned int flags, RedisModuleConfigGetBoolFunc getfn, RedisModuleConfigSetBoolFunc setfn, RedisModuleConfigApplyFunc applyfn, void *privdata);
int (*RedisModule_RegisterNumericConfig)(RedisModuleCtx *ctx, const char *name, long long default_val, unsigned int flags, long long min, long long max, RedisModuleConfigGetNumericFunc getfn, RedisModuleConfigSetNumericFunc setfn, RedisModuleConfigApplyFunc applyfn, void *privdata);
int (*RedisModule_RegisterStringConfig)(RedisModuleCtx *ctx, const char *name, const char *default_val, unsigned int flags, RedisModuleConfigGetStringFunc getfn, RedisModuleConfigSetStringFunc setfn, RedisModuleConfigApplyFunc applyfn, void *privdata);
int (*RedisModule_RegisterEnumConfig)(RedisModuleCtx *ctx, const char *name, int default_val, unsigned int flags, const char **enum_values, const int *int_values, int num_enum_vals, RedisModuleConfigGetEnumFunc getfn, RedisModuleConfigSetEnumFunc setfn, RedisModuleConfigApplyFunc applyfn, void *privdata);
int (*RedisModule_LoadConfigs)(RedisModuleCtx *ctx);
```
The module name will be auto appended along with a "." to the front of the name of the config.
**What RM_Register[...]Config does**:
A RedisModule struct now keeps a list of ModuleConfig objects which look like:
```
typedef struct ModuleConfig {
sds name; /* Name of config without the module name appended to the front */
void *privdata; /* Optional data passed into the module config callbacks */
union get_fn { /* The get callback specificed by the module */
RedisModuleConfigGetStringFunc get_string;
RedisModuleConfigGetNumericFunc get_numeric;
RedisModuleConfigGetBoolFunc get_bool;
RedisModuleConfigGetEnumFunc get_enum;
} get_fn;
union set_fn { /* The set callback specified by the module */
RedisModuleConfigSetStringFunc set_string;
RedisModuleConfigSetNumericFunc set_numeric;
RedisModuleConfigSetBoolFunc set_bool;
RedisModuleConfigSetEnumFunc set_enum;
} set_fn;
RedisModuleConfigApplyFunc apply_fn;
RedisModule *module;
} ModuleConfig;
```
It also registers a standardConfig in the configs array, with a pointer to the
ModuleConfig object associated with it.
**What happens on a CONFIG GET/SET MODULENAME.MODULECONFIG:**
For CONFIG SET, we do the same parsing as is done in config.c and pass that
as the argument to the module set callback. For CONFIG GET, we call the
module get callback and return that value to config.c to return to a client.
**CONFIG REWRITE**:
Starting up a server with module configurations in a .conf file but no module load
directive will fail. The flip side is also true, specifying a module load and a bunch
of module configurations will load those configurations in using the module defined
set callbacks on a RM_LoadConfigs call. Configs being rewritten works the same
way as it does for standard configs, as the module has the ability to specify a
default value. If a module is unloaded with configurations specified in the .conf file
those configurations will be commented out from the .conf file on the next config rewrite.
**RM_LoadConfigs:**
`RedisModule_LoadConfigs(RedisModuleCtx *ctx);`
This last API is used to make configs available within the onLoad() after they have
been registered. The expected usage is that a module will register all of its configs,
then call LoadConfigs to trigger all of the set callbacks, and then can error out if any
of them were malformed. LoadConfigs will attempt to set all configs registered to
either a .conf file argument/loadex argument or their default value if an argument is
not specified. **LoadConfigs is a required function if configs are registered.
** Also note that LoadConfigs **does not** call the apply callbacks, but a module
can do that directly after the LoadConfigs call.
**New Command: MODULE LOADEX [CONFIG NAME VALUE] [ARGS ...]:**
This command provides the ability to provide startup context information to a module.
LOADEX stands for "load extended" similar to GETEX. Note that provided config
names need the full MODULENAME.MODULECONFIG name. Any additional
arguments a module might want are intended to be specified after ARGS.
Everything after ARGS is passed to onLoad as RedisModuleString **argv.
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Madelyn Olson <matolson@amazon.com>
Co-authored-by: sundb <sundbcn@gmail.com>
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
There are a few places that use a hard coded const of 128 to allocate a buffer for d2string.
Replace these with a clear macro.
Note that In theory, converting double into string could take as much as nearly 400 chars,
but since d2string uses `%g` and not `%f`, it won't pass some 40 chars.
unrelated:
restore some changes to auto generated commands.c that got accidentally reverted in #10293
A timing issue of debug sleep master isn't long enough to ensure
that master is down and let the test identify it. Replaced the code
with suspend PID until verified master-is-down.
#10381 fixed an issue in `redis-cli --cluster reshard` that used to fail it (redis-cli) because
of a race condition.
the race condition is / was that when moving the last slot from a node, sometimes the PONG
messages delivering the configuration change arrive to that node before the SETSLOT arrives
to it, and it becomes a replica.
other times the the SETSLOT arrive first, and then PONG **doesn't** demote it.
**however**, the PR also added a new test that suffers from exactly the same race condition,
and the tests started failing a lot.
The fact is (if i understand it correctly), that this test (the one being deleted here), isn't related
to the fix that PR fixed (which was to fix redis-cli).
The race condition in the cluster code still happens, and as long as we don't solve it, there's
no reason to test it.
For now, even if my understandings are wrong, i'm gonna delete that failing test, since as far as
i understand, #10381 didn't introduce any new risks for that matter (which are gonna be
compromised by removing this check), this race existed since forever, and still exists, and the
fact that redis-cli is now immune to it is still being tested.
Additional work should be carried to fix it, and i live it for other PRs to handle.
Replace condition with wait_for_condition On "Verify sentinel that restarted
failed to reconnect master after ACL change"
The reason we reach it, is because the test is fast enough to modify ACL and
test sentinel connection status with the server - before its scheduled operation
got the chance to update connection status with the server:
```
/* Perform scheduled operations for the specified Redis instance. */
void sentinelHandleRedisInstance(sentinelRedisInstance *ri) {
/* ========== MONITORING HALF ============ */
/* Every kind of instance */
sentinelReconnectInstance(ri);
```
To remove `pending_querybuf`, the key point is reusing `querybuf`, it means master client's `querybuf` is not only used to parse command, but also proxy to sub-replicas.
1. add a new variable `repl_applied` for master client to record how many data applied (propagated via `replicationFeedStreamFromMasterStream()`) but not trimmed in `querybuf`.
2. don't sdsrange `querybuf` in `commandProcessed()`, we trim it to `repl_applied` after the whole replication pipeline processed to avoid fragmented `sdsrange`. And here are some scenarios we cannot trim to `qb_pos`:
* we don't receive complete command from master
* master client blocked because of client pause
* IO threads operate read, master client flagged with CLIENT_PENDING_COMMAND
In these scenarios, `qb_pos` points to the part of the current command or the beginning of next command, and the current command is not applied yet, so the `repl_applied` is not equal to `qb_pos`.
Some other notes:
* Do not do big arg optimization on master client, since we can only sdsrange `querybuf` after data sent to replicas.
* Set `qb_pos` and `repl_applied` to 0 when `freeClient` in `replicationCacheMaster`.
* Rewrite `processPendingCommandsAndResetClient` to `processPendingCommandAndInputBuffer`, let `processInputBuffer` to be called successively after `processCommandAndResetClient`.
The PR extends RM_Call with 3 new capabilities using new flags that
are given to RM_Call as part of the `fmt` argument.
It aims to assist modules that are getting a list of commands to be
executed from the user (not hard coded as part of the module logic),
think of a module that implements a new scripting language...
* `S` - Run the command in a script mode, this means that it will raise an
error if a command which are not allowed inside a script (flaged with the
`deny-script` flag) is invoked (like SHUTDOWN). In addition, on script mode,
write commands are not allowed if there is not enough good replicas (as
configured with `min-replicas-to-write`) and/or a disk error happened.
* `W` - no writes mode, Redis will reject any command that is marked with `write`
flag. Again can be useful to modules that implement a new scripting language
and wants to prevent any write commands.
* `E` - Return errors as RedisModuleCallReply. Today the errors that happened
before the command was invoked (like unknown commands or acl error) return
a NULL reply and set errno. This might be missing important information about
the failure and it is also impossible to just pass the error to the user using
RM_ReplyWithCallReply. This new flag allows you to get a RedisModuleCallReply
object with the relevant error message and treat it as if it was an error that was
raised by the command invocation.
Tests were added to verify the new code paths.
In addition small refactoring was done to share some code between modules,
scripts, and `processCommand` function:
1. `getAclErrorMessage` was added to `acl.c` to unified to log message extraction
from the acl result
2. `checkGoodReplicasStatus` was added to `replication.c` to check the status of
good replicas. It is used on `scriptVerifyWriteCommandAllow`, `RM_Call`, and
`processCommand`.
3. `writeCommandsGetDiskErrorMessage` was added to `server.c` to get the error
message on persistence failure. Again it is used on `scriptVerifyWriteCommandAllow`,
`RM_Call`, and `processCommand`.
fix#10439. see https://github.com/redis/redis/pull/9872
When executing SHUTDOWN we pause the client so we can un-pause it
if the shutdown fails.
this could happen during the timeout, if the shutdown is aborted, but could
also happen from withing the initial `call()` to shutdown, if the rdb save fails.
in that case when we return to `call()`, we'll crash if `c->cmd` has been set to NULL.
The call stack is:
```
unblockClient(c)
replyToClientsBlockedOnShutdown()
cancelShutdown()
finishShutdown()
prepareForShutdown()
shutdownCommand()
```
what's special about SHUTDOWN in that respect is that it can be paused,
and then un-paused before the original `call()` returns.
tests where added for both failed shutdown, and a followup successful one.
When ::singledb is 0, we will use db 9 for the test db.
Since ::singledb is set to 1 in the cluster-related tests, but not restored, some subsequent
tests associated with db 9 will fail.
After migrating a slot, send CLUSTER SETSLOT NODE to the destination
node first to make sure the slot isn't left without an owner in case
the destination node crashes before it is set as new owner.
When informing the source node, it can happen that the destination
node has already informed it and if the source node has lost its
last slot, it has already turned itself into a replica. Redis-cli
should ignore this error in this case.
The new module redact test will fail with valgrind:
```
[err]: modules can redact arguments in tests/unit/moduleapi/auth.tcl
Expected 'slowlog reset' to be equal to 'auth.redact 1 (redacted) 3 (redacted)' (context: type eval line 12 cmd {assert_equal {slowlog reset} [lindex [lindex [r slowlog get] 2] 3]} proc ::test)
```
The reason is that with `slowlog-log-slower-than 10000`,
`slowlog get` will have a chance to exceed 10ms.
Made two changes to avoid failure:
1. change `slowlog-log-slower-than` from 10000 to -1, distable it.
2. assert to use the previous execution result.
In theory, the second one can actually be left unchanged, but i
think it will be better if it is changed.
Implement a new cluster shards command, which provides a flexible and extensible API for topology discovery.
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Currently the sort and sort_ro can access external keys via `GET` and `BY`
in order to make sure the user cannot violate the authorization ACL
rules, the decision is to reject external keys access patterns unless ACL allows
SORT full access to all keys.
I.e. for backwards compatibility, SORT with GET/BY keeps working, but
if ACL has restrictions to certain keys, these features get permission denied.
### Implemented solution
We have discussed several potential solutions and decided to only allow the GET and BY
arguments when the user has all key permissions with the SORT command. The reasons
being that SORT with GET or BY is problematic anyway, for instance it is not supported in
cluster mode since it doesn't declare keys, and we're not sure the combination of that feature
with ACL key restriction is really required.
**HOWEVER** If in the fullness of time we will identify a real need for fine grain access
support for SORT, we would implement the complete solution which is the alternative
described below.
### Alternative (Completion solution):
Check sort ACL rules after executing it and before committing output (either via store or
to COB). it would require making several changes to the sort command itself. and would
potentially cause performance degradation since we will have to collect all the get keys
instead of just applying them to a temp array and then scan the access keys against the
ACL selectors. This solution can include an optimization to avoid the overheads of collecting
the key names, in case the ACL rules grant SORT full key-access, or if the ACL key pattern
literal matches the one used in GET/BY. It would also mean that authorization would be
O(nlogn) since we will have to complete most of the command execution before we can
perform verification
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
We need to wait for `sentinelTimer` to kick in, and then trigger the reconnect.
As for another change, we should better call `server_set_password` before calling SENTINEL SET auth-pass.
Fixes problem introeuced in #10400
When updating SENTINEL with master’s new password (command:
`SENTINEL SET mymaster auth-pass some-new-password`),
sentinel might still keep the old connection and avoid reconnecting
with the new password. This is because of wrong logic that traces
the last ping (pong) time to servers. In fact it worked fine until 8631e64
changed the condition to send ping. To resolve it with minimal risk,
let’s disconnect master and replicas once changing password/user.
Based on earlier work of yz1509.
Deleting a stream while a client is blocked XREADGROUP should unblock the client.
The idea is that if a client is blocked via XREADGROUP is different from
any other blocking type in the sense that it depends on the existence of both
the key and the group. Even if the key is deleted and then revived with XADD
it won't help any clients blocked on XREADGROUP because the group no longer
exist, so they would fail with -NOGROUP anyway.
The conclusion is that it's better to unblock these clients (with error) upon
the deletion of the key, rather than waiting for the first XADD.
Other changes:
1. Slightly optimize all `serveClientsBlockedOn*` functions by checking `server.blocked_clients_by_type`
2. All `serveClientsBlockedOn*` functions now use a list iterator rather than looking at `listFirst`, relying
on `unblockClient` to delete the head of the list. Before this commit, only `serveClientsBlockedOnStreams`
used to work like that.
3. bugfix: CLIENT UNBLOCK ERROR should work even if the command doesn't have a timeout_callback
(only relevant to module commands)
In some special commands like eval_ro / fcall_ro we allow no-writes commands.
But may-replicate commands are no-writes too, that leads crash when client pause write:
`Expected '*table size: 4096*' to match '*table size: 8192*'`
This test failed once on daily macOS, the reason is because
the bgsave has not stopped after the kill and `after 200`.
So there is a child process and no rehash triggered.
This commit use `waitForBgsave` to wait for it to finish.
Normally, `redis-cli` escapes non-printable data received from Redis, using a custom scheme (which is also used to handle quoted input). When using `--json` this is not desired as it is not compatible with RFC 7159, which specifies JSON strings are assumed to be Unicode and how they should be escaped.
This commit changes `--json` to follow RFC 7159, which means that properly encoded Unicode strings in Redis will result with a valid Unicode JSON.
However, this introduces a new problem with `--json` and data that is not valid Unicode (e.g., random binary data, text that follows other encoding, etc.). To address this, we add `--quoted-json` which produces JSON strings that follow the original redis-cli quoting scheme.
For example, a value that consists of only null (0x00) bytes will show up as:
* `"\u0000\u0000\u0000"` when using `--json`
* `"\\x00\\x00\\x00"` when using `--quoted-json`
In order to resolve some flaky tests which hard rely on examine memory footprint.
we introduce the following fixes:
# Fix in client-eviction test - by @yoav-steinberg
Sometime the libc allocator can use different size client struct allocations.
this may cause unexpected memory calculations to fail the test.
# Introduce new DEBUG command for disabling reply buffer resizing
In order to eliminate reply buffer resizing during specific tests.
we introduced the ability to disable (and enable) the resizing cron job
Co-authored-by: yoav-steinberg yoav@redislabs.com
After introducing #9822 need to prevent client reply buffer shrink
to maintain correct client memory math.
add needs:debug missing one one test.
Co-authored-by: Oran Agra <oran@redislabs.com>
This PR fix 2 issues on Lua scripting:
* Server error reply statistics (some errors were counted twice).
* Error code and error strings returning from scripts (error code was missing / misplaced).
## Statistics
a Lua script user is considered part of the user application, a sophisticated transaction,
so we want to count an error even if handled silently by the script, but when it is
propagated outwards from the script we don't wanna count it twice. on the other hand,
if the script decides to throw an error on its own (using `redis.error_reply`), we wanna
count that too.
Besides, we do count the `calls` in command statistics for the commands the script calls,
we we should certainly also count `failed_calls`.
So when a simple `eval "return redis.call('set','x','y')" 0` fails, it should count the failed call
to both SET and EVAL, but the `errorstats` and `total_error_replies` should be counted only once.
The PR changes the error object that is raised on errors. Instead of raising a simple Lua
string, Redis will raise a Lua table in the following format:
```
{
err='<error message (including error code)>',
source='<User source file name>',
line='<line where the error happned>',
ignore_error_stats_update=true/false,
}
```
The `luaPushError` function was modified to construct the new error table as describe above.
The `luaRaiseError` was renamed to `luaError` and is now simply called `lua_error` to raise
the table on the top of the Lua stack as the error object.
The reason is that since its functionality is changed, in case some Redis branch / fork uses it,
it's better to have a compilation error than a bug.
The `source` and `line` fields are enriched by the error handler (if possible) and the
`ignore_error_stats_update` is optional and if its not present then the default value is `false`.
If `ignore_error_stats_update` is true, the error will not be counted on the error stats.
When parsing Redis call reply, each error is translated to a Lua table on the format describe
above and the `ignore_error_stats_update` field is set to `true` so we will not count errors
twice (we counted this error when we invoke the command).
The changes in this PR might have been considered as a breaking change for users that used
Lua `pcall` function. Before, the error was a string and now its a table. To keep backward
comparability the PR override the `pcall` implementation and extract the error message from
the error table and return it.
Example of the error stats update:
```
127.0.0.1:6379> lpush l 1
(integer) 2
127.0.0.1:6379> eval "return redis.call('get', 'l')" 0
(error) WRONGTYPE Operation against a key holding the wrong kind of value. script: e471b73f1ef44774987ab00bdf51f21fd9f7974a, on @user_script:1.
127.0.0.1:6379> info Errorstats
# Errorstats
errorstat_WRONGTYPE:count=1
127.0.0.1:6379> info commandstats
# Commandstats
cmdstat_eval:calls=1,usec=341,usec_per_call=341.00,rejected_calls=0,failed_calls=1
cmdstat_info:calls=1,usec=35,usec_per_call=35.00,rejected_calls=0,failed_calls=0
cmdstat_lpush:calls=1,usec=14,usec_per_call=14.00,rejected_calls=0,failed_calls=0
cmdstat_get:calls=1,usec=10,usec_per_call=10.00,rejected_calls=0,failed_calls=1
```
## error message
We can now construct the error message (sent as a reply to the user) from the error table,
so this solves issues where the error message was malformed and the error code appeared
in the middle of the error message:
```diff
127.0.0.1:6379> eval "return redis.call('set','x','y')" 0
-(error) ERR Error running script (call to 71e6319f97b0fe8bdfa1c5df3ce4489946dda479): @user_script:1: OOM command not allowed when used memory > 'maxmemory'.
+(error) OOM command not allowed when used memory > 'maxmemory' @user_script:1. Error running script (call to 71e6319f97b0fe8bdfa1c5df3ce4489946dda479)
```
```diff
127.0.0.1:6379> eval "redis.call('get', 'l')" 0
-(error) ERR Error running script (call to f_8a705cfb9fb09515bfe57ca2bd84a5caee2cbbd1): @user_script:1: WRONGTYPE Operation against a key holding the wrong kind of value
+(error) WRONGTYPE Operation against a key holding the wrong kind of value script: 8a705cfb9fb09515bfe57ca2bd84a5caee2cbbd1, on @user_script:1.
```
Notica that `redis.pcall` was not change:
```
127.0.0.1:6379> eval "return redis.pcall('get', 'l')" 0
(error) WRONGTYPE Operation against a key holding the wrong kind of value
```
## other notes
Notice that Some commands (like GEOADD) changes the cmd variable on the client stats so we
can not count on it to update the command stats. In order to be able to update those stats correctly
we needed to promote `realcmd` variable to be located on the client struct.
Tests was added and modified to verify the changes.
Related PR's: #10279, #10218, #10278, #10309
Co-authored-by: Oran Agra <oran@redislabs.com>
Adds the ability to track the lag of a consumer group (CG), that is, the number
of entries yet-to-be-delivered from the stream.
The proposed constant-time solution is in the spirit of "best-effort."
Partially addresses #8737.
## Description of approach
We add a new "entries_added" property to the stream. This starts at 0 for a new
stream and is incremented by 1 with every `XADD`. It is essentially an all-time
counter of the entries added to the stream.
Given the stream's length and this counter value, we can trivially find the logical
"entries_added" counter of the first ID if and only if the stream is contiguous.
A fragmented stream contains one or more tombstones generated by `XDEL`s.
The new "xdel_max_id" stream property tracks the latest tombstone.
The CG also tracks its last delivered ID's as an "entries_read" counter and
increments it independently when delivering new messages, unless the this
read counter is invalid (-1 means invalid offset). When the CG's counter is
available, the reported lag is the difference between added and read counters.
Lastly, this also adds a "first_id" field to the stream structure in order to make
looking it up cheaper in most cases.
## Limitations
There are two cases in which the mechanism isn't able to track the lag.
In these cases, `XINFO` replies with `null` in the "lag" field.
The first case is when a CG is created with an arbitrary last delivered ID,
that isn't "0-0", nor the first or the last entries of the stream. In this case,
it is impossible to obtain a valid read counter (short of an O(N) operation).
The second case is when there are one or more tombstones fragmenting
the stream's entries range.
In both cases, given enough time and assuming that the consumers are
active (reading and lacking) and advancing, the CG should be able to
catch up with the tip of the stream and report zero lag.
Once that's achieved, lag tracking would resume as normal (until the
next tombstone is set).
## API changes
* `XGROUP CREATE` added with the optional named argument `[ENTRIESREAD entries-read]`
for explicitly specifying the new CG's counter.
* `XGROUP SETID` added with an optional positional argument `[ENTRIESREAD entries-read]`
for specifying the CG's counter.
* `XINFO` reports the maximal tombstone ID, the recorded first entry ID, and total
number of entries added to the stream.
* `XINFO` reports the current lag and logical read counter of CGs.
* `XSETID` is an internal command that's used in replication/aof. It has been added with
the optional positional arguments `[ENTRIESADDED entries-added] [MAXDELETEDID max-deleted-entry-id]`
for propagating the CG's offset and maximal tombstone ID of the stream.
## The generic unsolved problem
The current stream implementation doesn't provide an efficient way to obtain the
approximate/exact size of a range of entries. While it could've been nice to have
that ability (#5813) in general, let alone specifically in the context of CGs, the risk
and complexities involved in such implementation are in all likelihood prohibitive.
## A refactoring note
The `streamGetEdgeID` has been refactored to accommodate both the existing seek
of any entry as well as seeking non-deleted entries (the addition of the `skip_tombstones`
argument). Furthermore, this refactoring also migrated the seek logic to use the
`streamIterator` (rather than `raxIterator`) that was, in turn, extended with the
`skip_tombstones` Boolean struct field to control the emission of these.
Co-authored-by: Guy Benoish <guy.benoish@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
The test will fail on slow machines (valgrind or FreeBsd).
Because in #10256 when WATCH is called on a key that's already
logically expired, we will add an `expired` flag, and we will
skip it in `isWatchedKeyExpired` check.
Apparently we need to increase the expiration time so that
the key can not expire logically then the WATCH is called.
Also added retries to make sure it doesn't fail. I suppose
100ms is enough in valgrind, tested locally, no need to retry.
When WATCH is called on a key that's already logically expired, avoid discarding the
transaction when the keys is actually deleted.
When WATCH is called, a flag is stored if the key is already expired
at the time of watch. The expired key is not deleted, only checked.
When a key is "touched", if it is deleted and it was already expired
when a client watched it, the client is not marked as dirty.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: zhaozhao.zz <zhaozhao.zz@alibaba-inc.com>
Current implementation simple idle client which serves no traffic still
use ~17Kb of memory. this is mainly due to a fixed size reply buffer
currently set to 16kb.
We have encountered some cases in which the server operates in a low memory environments.
In such cases a user who wishes to create large connection pools to support potential burst period,
will exhaust a large amount of memory to maintain connected Idle clients.
Some users may choose to "sacrifice" performance in order to save memory.
This commit introduce a dynamic mechanism to shrink and expend the client reply buffer based on
periodic observed peak.
the algorithm works as follows:
1. each time a client reply buffer has been fully written, the last recorded peak is updated:
new peak = MAX( last peak, current written size)
2. during clients cron we check for each client if the last observed peak was:
a. matching the current buffer size - in which case we expend (resize) the buffer size by 100%
b. less than half the buffer size - in which case we shrink the buffer size by 50%
3. In any case we will **not** resize the buffer in case:
a. the current buffer peak is less then the current buffer usable size and higher than 1/2 the
current buffer usable size
b. the value of (current buffer usable size/2) is less than 1Kib
c. the value of (current buffer usable size*2) is larger than 16Kib
4. the peak value is reset to the current buffer position once every **5** seconds. we maintain a new
field in the client structure (buf_peak_last_reset_time) which is used to keep track of how long it
passed since the last buffer peak reset.
### **Interface changes:**
**CIENT LIST** - now contains 2 new extra fields:
rbs= < the current size in bytes of the client reply buffer >
rbp=< the current value in bytes of the last observed buffer peak position >
**INFO STATS** - now contains 2 new statistics:
reply_buffer_shrinks = < total number of buffer shrinks performed >
reply_buffer_expends = < total number of buffer expends performed >
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Yoav Steinberg <yoav@redislabs.com>
This implements the following main pieces of functionality:
* Renames key spec "CHANNEL" to be "NOT_KEY", and update the documentation to
indicate it's for cluster routing and not for any other key related purpose.
* Add the getchannels-api, so that modules can now define commands that are subject to
ACL channel permission checks.
* Add 4 new flags that describe how a module interacts with a command (SUBSCRIBE, PUBLISH,
UNSUBSCRIBE, and PATTERN). They are all technically composable, however not sure how a
command could both subscribe and unsubscribe from a command at once, but didn't see
a reason to add explicit validation there.
* Add two new module apis RM_ChannelAtPosWithFlags and RM_IsChannelsPositionRequest to
duplicate the functionality provided by the keys position APIs.
* The RM_ACLCheckChannelPermissions (only released in 7.0 RC1) was changed to take flags
rather than a boolean literal.
* The RM_ACLCheckKeyPermissions (only released in 7.0 RC1) was changed to take flags
corresponding to keyspecs instead of custom permission flags. These keyspec flags mimic
the flags for ACLCheckChannelPermissions.
Make sure the status return from loading multiple AOF files reflects the overall
result, not just the one of the last file.
When one of the AOF files succeeded to load, but the last AOF file
was empty, the loadAppendOnlyFiles will return AOF_EMPTY.
This commit changes this behavior, and return AOF_OK in that case.
This can happen for example, when loading old AOF file, and no more commands processed,
the manifest file will include base AOF file with data, and empty incr AOF file.
Co-authored-by: chenyang8094 <chenyang8094@users.noreply.github.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
This is a followup work for #10278, and a discussion about #10279
The changes:
- fix failed_calls in command stats for blocked clients that got error.
including CLIENT UNBLOCK, and module replying an error from a thread.
- fix latency stats for XREADGROUP that filed with -NOGROUP
Theory behind which errors should be counted:
- error stats represents errors returned to the user, so an error handled by a
module should not be counted.
- total error counter should be the same.
- command stats represents execution of commands (even with RM_Call, and if
they fail or get rejected it counts these calls in commandstats, so it should
also count failed_calls)
Some thoughts about Scripts:
for scripts it could be different since they're part of user code, not the infra (not an extension to redis)
we certainly want commandstats to contain all calls and errors
a simple script is like mult-exec transaction so an error inside it should be counted in error stats
a script that replies with an error to the user (using redis.error_reply) should also be counted in error stats
but then the problem is that a plain `return redis.call("SET")` should not be counted twice (once for the SET
and once for EVAL)
so that's something left to be resolved in #10279
This includes two fixes:
* We forgot to count non-key reallocs in defragmentation stats.
* Fix the script defrag tests so to make dict entries less signigicant in fragmentation by making the scripts larger.
This assures active defrage will complete and reach desired results.
Some inherent fragmentation might exists in dict entries which we need to ignore.
This lead to occasional CI failures.
Consider the following example:
1. geoadd k1 -0.15307903289794921875 85 n1 0.3515625 85.00019260486917005437 n2.
2. geodist k1 n1 n2 returns "4891.9380"
3. but GEORADIUSBYMEMBER k1 n1 4891.94 m only returns n1.
n2 is in the boundingbox but out of search areas.So we let search areas contain boundingbox to get n2.
Co-authored-by: Binbin <binloveplay1314@qq.com>
Modifications of this PR:
1. Support the verification of `Multi Part AOF`, while still maintaining support for the
old-style `AOF/RDB-preamble`. `redis-check-aof` will automatically choose which
mode to use according to the incoming file format.
`Usage: redis-check-aof [--fix|--truncate-to-timestamp $timestamp] <AOF/manifest>`
2. Refactor part of the code to make it easier to understand
3. Currently only supports truncate (`--fix` or `--truncate-to-timestamp`) the last AOF
file (may be `BASE` or `INCR`)
The reasons for 3 above:
- for `--fix`: Only the last AOF may be truncated, this is guaranteed by redis
- for `--truncate-to-timestamp`: Normally, we only have `BASE` + `INCR` files
at most, and `BASE` cannot be truncated(It only contains a timestamp annotation
at the beginning of the file), so only `INCR` can be truncated. If we have a
`BASE+INCR1+INCR2` file (meaning we have an interrupted AOFRW), Only `INCR2`
files can be truncated at this time. If we still insist on truncate `INCR1`, we need to
manually delete `INCR2` and update the manifest file, then re-run `redis-check-aof`
- If we want to support truncate any file, we need to add very complicated code to support
the atomic modification of multiple file deletion and update manifest, I think this is unnecessary
In order to make sure no more commands processed, we wait that
the 'load handlers' will disconncet.
The test by mistake waited on the (last) slave instead of the master.
This PR handles several aspects
1. Calls to RM_ReplyWithError from thread safe contexts don't violate thread safety.
2. Errors returning from RM_Call to the module aren't counted in the statistics (they
might be handled silently by the module)
3. When a module propagates a reply it got from RM_Call to it's client, then the error
statistics are counted.
This is done by:
1. When appending an error reply to the output buffer, we avoid updating the global
error statistics, instead we cache that error in a deferred list in the client struct.
2. When creating a RedisModuleCallReply object, the deferred error list is moved from
the client into that object.
3. when a module calls RM_ReplyWithCallReply we copy the deferred replies to the dest
client (if that's a real client, then that's when the error statistics are updated to the server)
Note about RM_ReplyWithCallReply: if the original reply had an array with errors, and the module
replied with just a portion of the original reply, and not the entire reply, the errors are currently not
propagated and the errors stats will not get propagated.
Fix#10180
Added regression tests for #10020 / #10081 / #10243.
The above PRs fixed some crashes due to an asserting,
see function `clientHasPendingReplies` (introduced in #9166).
This commit added some tests to cover the above scenario.
These tests will all fail in #9166, althought fixed not,
there is value in adding these tests to cover and verify
the changes. And it also can cover #8868 (verify the logs).
Other changes:
1. Reduces the wait time in `waitForBgsave` and `waitForBgrewriteaof`
from 1s to 50ms, which should reduce the time for some tests.
2. Improve the test infra to print context when `assert_match` fails.
3. Improve the test infra to print `$error` when `assert_error` fails.
```
Expected an error matching 'ERR*' but got 'OK' (context: type eval line 4 cmd {assert_error "ERR*" {r set a b}} proc ::test)
```
Remove scripts defragger since it was broken since #10126 (released in 7.0 RC1).
would crash the server if defragger starts in a server that contains eval scripts.
In #10126 the global `lua_script` dict became a dict to a custom `luaScript` struct with an internal `robj`
in it instead of a generic `sds` -> `robj` dict. This means we need custom code to defrag it and since scripts
should never really cause much fragmentation it makes more sense to simply remove the defrag code for scripts.
The bug is introduced by #9323. (released in 7.0 RC1)
The define of `REDISMODULE_OPTIONS_HANDLE_IO_ERRORS` and `REDISMODULE_OPTION_NO_IMPLICIT_SIGNAL_MODIFIED` have the same value.
This will result in skipping `signalModifiedKey()` after `RM_CloseKey()` if the module has set
`REDISMODULE_OPTIONS_HANDLE_REPL_ASYNC_LOAD` option.
The implication is missing WATCH and client side tracking invalidations.
Other changes:
- add `no-implicit-signal-modified` to the options in INFO modules
Co-authored-by: Oran Agra <oran@redislabs.com>
This is an enhancement for INFO command, previously INFO only support one argument
for different info section , if user want to get more categories information, either perform
INFO all / default or calling INFO for multiple times.
**Description of the feature**
The goal of adding this feature is to let the user retrieve multiple categories via the INFO
command, and still avoid emitting the same section twice.
A use case for this is like Redis Sentinel, which periodically calling INFO command to refresh
info from monitored Master/Slaves, only Server and Replication part categories are used for
parsing information. If the INFO command can return just enough categories that client side
needs, it can save a lot of time for client side parsing it as well as network bandwidth.
**Implementation**
To share code between redis, sentinel, and other users of INFO (DEBUG and modules),
we have a new `genInfoSectionDict` function that returns a dict and some boolean flags
(e.g. `all`) to the caller (built from user input).
Sentinel is later purging unwanted sections from that, and then it is forwarded to the info `genRedisInfoString`.
**Usage Examples**
INFO Server Replication
INFO CPU Memory
INFO default commandstats
Co-authored-by: Oran Agra <oran@redislabs.com>
This PR handles inconsistencies in errors returned from lua scripts.
Details of the problem can be found in #10165.
### Changes
- Remove double stack trace. It's enough that a stack trace is automatically added by the engine's error handler
see d0bc4fff18/src/function_lua.c (L472-L485)
and d0bc4fff18/src/eval.c (L243-L255)
- Make sure all errors a preceded with an error code. Passing a simple string to `luaPushError()` will prepend it
with a generic `ERR` error code.
- Make sure lua error table doesn't include a RESP `-` error status. Lua stores redis error's as a lua table with a
single `err` field and a string. When the string is translated back to RESP we add a `-` to it.
See d0bc4fff18/src/script_lua.c (L510-L517)
So there's no need to store it in the lua table.
### Before & After
```diff
--- <unnamed>
+++ <unnamed>
@@ -1,14 +1,14 @@
1: config set maxmemory 1
2: +OK
3: eval "return redis.call('set','x','y')" 0
- 4: -ERR Error running script (call to 71e6319f97b0fe8bdfa1c5df3ce4489946dda479): @user_script:1: @user_script: 1: -OOM command not allowed when used memory > 'maxmemory'.
+ 4: -ERR Error running script (call to 71e6319f97b0fe8bdfa1c5df3ce4489946dda479): @user_script:1: OOM command not allowed when used memory > 'maxmemory'.
5: eval "return redis.pcall('set','x','y')" 0
- 6: -@user_script: 1: -OOM command not allowed when used memory > 'maxmemory'.
+ 6: -OOM command not allowed when used memory > 'maxmemory'.
7: eval "return redis.call('select',99)" 0
8: -ERR Error running script (call to 4ad5abfc50bbccb484223905f9a16f09cd043ba8): @user_script:1: ERR DB index is out of range
9: eval "return redis.pcall('select',99)" 0
10: -ERR DB index is out of range
11: eval_ro "return redis.call('set','x','y')" 0
-12: -ERR Error running script (call to 71e6319f97b0fe8bdfa1c5df3ce4489946dda479): @user_script:1: @user_script: 1: Write commands are not allowed from read-only scripts.
+12: -ERR Error running script (call to 71e6319f97b0fe8bdfa1c5df3ce4489946dda479): @user_script:1: ERR Write commands are not allowed from read-only scripts.
13: eval_ro "return redis.pcall('set','x','y')" 0
-14: -@user_script: 1: Write commands are not allowed from read-only scripts.
+14: -ERR Write commands are not allowed from read-only scripts.
```
Fix#7021#8924#10198
# Intro
Before this commit X[AUTO]CLAIM used to transfer deleted entries from one
PEL to another, but reply with "nil" for every such entry (instead of the entry id).
The idea (for XCLAIM) was that the caller could see this "nil", realize the entry
no longer exists, and XACK it in order to remove it from PEL.
The main problem with that approach is that it assumes there's a correlation
between the index of the "id" arguments and the array indices, which there
isn't (in case some of the input IDs to XCLAIM never existed/read):
```
127.0.0.1:6379> XADD x 1 f1 v1
"1-0"
127.0.0.1:6379> XADD x 2 f1 v1
"2-0"
127.0.0.1:6379> XADD x 3 f1 v1
"3-0"
127.0.0.1:6379> XGROUP CREATE x grp 0
OK
127.0.0.1:6379> XREADGROUP GROUP grp Alice COUNT 2 STREAMS x >
1) 1) "x"
2) 1) 1) "1-0"
2) 1) "f1"
2) "v1"
2) 1) "2-0"
2) 1) "f1"
2) "v1"
127.0.0.1:6379> XDEL x 1 2
(integer) 2
127.0.0.1:6379> XCLAIM x grp Bob 0 0-99 1-0 1-99 2-0
1) (nil)
2) (nil)
```
# Changes
Now, X[AUTO]CLAIM acts in the following way:
1. If one tries to claim a deleted entry, we delete it from the PEL we found it in
(and the group PEL too). So de facto, such entry is not claimed, just cleared
from PEL (since anyway it doesn't exist in the stream)
2. since we never claim deleted entries, X[AUTO]CLAIM will never return "nil"
instead of an entry.
3. add a new element to XAUTOCLAIM's response (see below)
# Knowing which entries were cleared from the PEL
The caller may want to log any entries that were found in a PEL but deleted from
the stream itself (it would suggest that there might be a bug in the application:
trimming the stream while some entries were still no processed by the consumers)
## XCLAIM
the set {XCLAIM input ids} - {XCLAIM returned ids} contains all the entry ids that were
not claimed which means they were deleted (assuming the input contains only entries
from some PEL). The user doesn't need to XACK them because XCLAIM had already
deleted them from the source PEL.
## XAUTOCLAIM
XAUTOCLAIM has a new element added to its reply: it's an array of all the deleted
stream IDs it stumbled upon.
This is somewhat of a breaking change since X[AUTO]CLAIM used to be able to reply
with "nil" and now it can't... But since it was undocumented (and generally a bad idea
to rely on it, as explained above) the breakage is not that bad.
- add COMMAND GETKEYSANDFLAGS sub-command
- add RM_KeyAtPosWithFlags and GetCommandKeysWithFlags
- RM_KeyAtPos and RM_CreateCommand set flags requiring full access for keys
- RM_CreateCommand set VARIABLE_FLAGS
- expose `variable_flags` flag in COMMAND INFO key-specs
- getKeysFromCommandWithSpecs prefers key-specs over getkeys-api
- add tests for all of these
If summary or since is empty, we used to return NULL in
COMMAND DOCS. Currently all redis commands will have these
two fields.
But not for module command, summary and since are optional
for RM_SetCommandInfo. With the change in #10043, if a module
command doesn't have the summary or since, redis-cli will
crash (see #10250).
In this commit, COMMAND DOCS avoid adding summary or since
when they are missing.
Changes:
1. Adds the `redis.acl_check_cmd()` api to lua scripts. It can be used to check if the
current user has permissions to execute a given command. The new function receives
the command to check as an argument exactly like `redis.call()` receives the command
to execute as an argument.
2. In the PR I unified the code used to convert lua arguments to redis argv arguments from
both the new `redis.acl_check_cmd()` API and the `redis.[p]call()` API. This cleans up
potential duplicate code.
3. While doing the refactoring in 2 I noticed there's an optimization to reduce allocation calls
when parsing lua arguments into an `argv` array in the `redis.[p]call()` implementation.
These optimizations were introduced years ago in 48c49c4851
and 4f686555ce. It is unclear why this was added.
The original commit message claims a 4% performance increase which I couldn't recreate
and might not be worth it even if it did recreate. This PR removes that optimization.
Following are details of the benchmark I did that couldn't reveal any performance
improvements due to this optimization:
```
benchmark 1: src/redis-benchmark -P 500 -n 10000000 eval 'return redis.call("ping")' 0
benchmark 2: src/redis-benchmark -P 500 -r 1000 -n 1000000 eval 'return redis.call("mset","k1__rand_int__","v1__rand_int__","k2__rand_int__","v2__rand_int__","k3__rand_int__","v3__rand_int__","k4__rand_int__","v4__rand_int__")' 0
benchmark 3: src/redis-benchmark -P 500 -r 1000 -n 100000 eval "for i=1,100,1 do redis.call('set','kk'..i,'vv'..__rand_int__) end return redis.call('get','kk5')" 0
benchmark 4: src/redis-benchmark -P 500 -r 1000 -n 1000000 eval 'return redis.call("mset","k1__rand_int__","v1__rand_int__","k2__rand_int__","v2__rand_int__","k3__rand_int__","v3__rand_int__","k4__rand_int__","v4__rand_int__xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx")'
```
I ran the benchmark on this branch with and without commit 68b71680a4d3bb8f0509e06578a9f15d05b92a47
Results in requests per second:
cmd | without optimization | without optimization 2nd run | with original optimization | with original optimization 2nd run
-- | -- | -- | -- | --
1 | 461233.34 | 477395.31 | 471098.16 | 469946.91
2 | 34774.14 | 35469.8 | 35149.38 | 34464.93
3 | 6390.59 | 6281.41 | 6146.28 | 6464.12
4 | 28005.71 | | 27965.77 |
As you can see, different use cases showed identical or negligible performance differences.
So finally I decided to chuck the original optimization and simplify the code.
This is a followup to #9656 and implements the following step mentioned in that PR:
* When possible, extract all the help and completion tips from COMMAND DOCS (Redis 7.0 and up)
* If COMMAND DOCS fails, use the static help.h compiled into redis-cli.
* Supplement additional command names from COMMAND (pre-Redis 7.0)
The last step is needed to add module command and other non-standard commands.
This PR does not change the interactive hinting mechanism, which still uses only the param
strings to provide somewhat unreliable and inconsistent command hints (see #8084).
That task is left for a future PR.
Co-authored-by: Oran Agra <oran@redislabs.com>
Adds RM_SetCommandInfo, allowing modules to provide the following command info:
* summary
* complexity
* since
* history
* hints
* arity
* key specs
* args
This information affects the output of `COMMAND`, `COMMAND INFO` and `COMMAND DOCS`,
Cluster, ACL and is used to filter commands with the wrong number of arguments before
the call reaches the module code.
The recently added API functions for key specs (never released) are removed.
A minimalist example would look like so:
```c
RedisModuleCommand *mycmd = RedisModule_GetCommand(ctx,"mymodule.mycommand");
RedisModuleCommandInfo mycmd_info = {
.version = REDISMODULE_COMMAND_INFO_VERSION,
.arity = -5,
.summary = "some description",
};
if (RedisModule_SetCommandInfo(mycmd, &mycmd_info) == REDISMODULE_ERR)
return REDISMODULE_ERR;
````
Notes:
* All the provided information (including strings) is copied, not keeping references to the API input data.
* The version field is actually a static struct that contains the sizes of the the structs used in arrays,
so we can extend these in the future and old version will still be able to take the part they can support.
Change the sentinel config file to a directory in SENTINEL SET test.
So it will now fail on the `rename` in `rewriteConfigOverwriteFile`.
The test used to set the sentinel config file permissions to `000` to
simulate failure. But it fails on centos7 / freebsd / alpine. (introduced in #10151)
Other changes:
1. More error messages after the config rewrite failure.
2. Modify arg name `force_all` in `rewriteConfig` to `force_write`. (was rename in #9304)
3. Fix a typo in debug quicklist-packed-threshold, then -> than. (#9357)
When performing `SENTINEL SET`, Sentinel updates the local configuration file. Before this commit, failure to update the file would still result with an `+OK` reply. Now, a `-ERR Failed to save config file` error will be returned.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
Add check enough good slaves for write command when evaluating scripts.
This check is made before the script is executed, if we have function flags, and per redis command if we don't.
Co-authored-by: Phuc. Vo Trong <phucvt@vng.com.vn>
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Meir Shpilraien (Spielrein) <meir@redis.com>
This is done to avoid a crash when the timer fires after the module was unloaded.
Or memory leaks in case we wanted to just ignore the timer.
It'll cause the MODULE UNLOAD command to return with an error
Co-authored-by: sundb <sundbcn@gmail.com>
