Fix#12785 and other race condition issues.
See the following isolated comments.
The following report was obtained using SANITIZER thread.
```sh
make SANITIZER=thread
./runtest-moduleapi --config io-threads 4 --config io-threads-do-reads yes --accurate
```
1. Fixed thread-safe issue in RM_UnblockClient()
Related discussion:
https://github.com/redis/redis/pull/12817#issuecomment-1831181220
* When blocking a client in a module using `RM_BlockClientOnKeys()` or
`RM_BlockClientOnKeysWithFlags()`
with a timeout_callback, calling RM_UnblockClient() in module threads
can lead to race conditions
in `updateStatsOnUnblock()`.
- Introduced:
Version: 6.2
PR: #7491
- Touch:
`server.stat_numcommands`, `cmd->latency_histogram`, `server.slowlog`,
and `server.latency_events`
- Harm Level: High
Potentially corrupts the memory data of `cmd->latency_histogram`,
`server.slowlog`, and `server.latency_events`
- Solution:
Differentiate whether the call to moduleBlockedClientTimedOut() comes
from the module or the main thread.
Since we can't know if RM_UnblockClient() comes from module threads, we
always assume it does and
let `updateStatsOnUnblock()` asynchronously update the unblock status.
* When error reply is called in timeout_callback(), ctx is not
thread-safe, eventually lead to race conditions in `afterErrorReply`.
- Introduced:
Version: 6.2
PR: #8217
- Touch
`server.stat_total_error_replies`, `server.errors`,
- Harm Level: High
Potentially corrupts the memory data of `server.errors`
- Solution:
Make the ctx in `timeout_callback()` with `REDISMODULE_CTX_THREAD_SAFE`,
and asynchronously reply errors to the client.
2. Made RM_Reply*() family API thread-safe
Related discussion:
https://github.com/redis/redis/pull/12817#discussion_r1408707239
Call chain: `RM_Reply*()` -> `_addReplyToBufferOrList()` -> touch
server.current_client
- Introduced:
Version: 7.2.0
PR: #12326
- Harm Level: None
Since the module fake client won't have the `CLIENT_PUSHING` flag, even
if we touch server.current_client,
we can still exit after `c->flags & CLIENT_PUSHING`.
- Solution
Checking `c->flags & CLIENT_PUSHING` earlier.
3. Made freeClient() thread-safe
Fix#12785
- Introduced:
Version: 4.0
Commit:
3fcf959e60
- Harm Level: Moderate
* Trigger assertion
It happens when the module thread calls freeClient while the io-thread
is in progress,
which just triggers an assertion, and doesn't make any race condiaions.
* Touch `server.current_client`, `server.stat_clients_type_memory`, and
`clientMemUsageBucket->clients`.
It happens between the main thread and the module threads, may cause
data corruption.
1. Error reset `server.current_client` to NULL, but theoretically this
won't happen,
because the module has already reset `server.current_client` to old
value before entering freeClient.
2. corrupts `clientMemUsageBucket->clients` in
updateClientMemUsageAndBucket().
3. Causes server.stat_clients_type_memory memory statistics to be
inaccurate.
- Solution:
* No longer counts memory usage on fake clients, to avoid updating
`server.stat_clients_type_memory` in freeClient.
* No longer resetting `server.current_client` in unlinkClient, because
the fake client won't be evicted or disconnected in the mid of the
process.
* Judgment assertion `io_threads_op == IO_THREADS_OP_IDLE` only if c is
not a fake client.
4. Fixed free client args without GIL
Related discussion:
https://github.com/redis/redis/pull/12817#discussion_r1408706695
When freeing retained strings in the module thread (refcount decr), or
using them in some way (refcount incr), we should do so while holding
the GIL,
otherwise, they might be simultaneously freed while the main thread is
processing the unblock client state.
- Introduced:
Version: 6.2.0
PR: #8141
- Harm Level: Low
Trigger assertion or double free or memory leak.
- Solution:
Documenting that module API users need to ensure any access to these
retained strings is done with the GIL locked
5. Fix adding fake client to server.clients_pending_write
It will incorrectly log the memory usage for the fake client.
Related discussion:
https://github.com/redis/redis/pull/12817#issuecomment-1851899163
- Introduced:
Version: 4.0
Commit:
9b01b64430
- Harm Level: None
Only result in NOP
- Solution:
* Don't add fake client into server.clients_pending_write
* Add c->conn assertion for updateClientMemUsageAndBucket() and
updateClientMemoryUsage() to avoid same
issue in the future.
So now it will be the responsibility of the caller of both of them to
avoid passing in fake client.
6. Fix calling RM_BlockedClientMeasureTimeStart() and
RM_BlockedClientMeasureTimeEnd() without GIL
- Introduced:
Version: 6.2
PR: #7491
- Harm Level: Low
Causes inaccuracies in command latency histogram and slow logs, but does
not corrupt memory.
- Solution:
Module API users, if know that non-thread-safe APIs will be used in
multi-threading, need to take responsibility for protecting them with
their own locks instead of the GIL, as using the GIL is too expensive.
### Other issue
1. RM_Yield is not thread-safe, fixed via #12905.
### Summarize
1. Fix thread-safe issues for `RM_UnblockClient()`, `freeClient()` and
`RM_Yield`, potentially preventing memory corruption, data disorder, or
assertion.
2. Updated docs and module test to clarify module API users'
responsibility for locking non-thread-safe APIs in multi-threading, such
as RM_BlockedClientMeasureTimeStart/End(), RM_FreeString(),
RM_RetainString(), and RM_HoldString().
### About backpot to 7.2
1. The implement of (1) is not too satisfying, would like to get more
eyes.
2. (2), (3) can be safely for backport
3. (4), (6) just modifying the module tests and updating the
documentation, no need for a backpot.
4. (5) is harmless, no need for a backpot.
---------
Co-authored-by: Oran Agra <oran@redislabs.com>
Before #12850, we will only try to shrink the dict in serverCron,
which we can control by using a child process, but now every time
we delete a key, the shrink check will be called.
In these test (added in #12802), we meant to disable the resizing,
but druing the delete, the dict will meet the force shrink, like
2 / 128 = 0.015 < 0.2, the delete will trigger a force resize and
will cause the test to fail.
In this commit, we try to keep the load factor at 3 / 128 = 0.023,
that is, do not meet the force shrink.
The test have a race:
```
*** [err]: Redis can rewind and trigger smaller slot resizing in tests/unit/other.tcl
Expected '[Dictionary HT]
Hash table 0 stats (main hash table):
table size: 12
number of elements: 2
[Expires HT]
Hash table 0 stats (main hash table):
No stats available for empty dictionaries
' to match '*table size: 8*' (context: type eval line 12 cmd {assert_match "*table size: 8*" [r debug HTSTATS 0]} proc ::test)
```
When `r del "{alice}$j"` is executed in the loop, when the key is
deleted to [9, 12], the load factor has meet HASHTABLE_MIN_FILL,
if serverCron happens to trigger slot dict resize, then the test
will fail. Because there is not way to meet HASHTABLE_MIN_FILL in
the subsequent dels.
The solution is to avoid triggering the resize in advance. We can
use multi to delete them at once, or we can disable the resize.
Since we disabled resize in the previous test, the fix also uses
the method of disabling resize.
The test is introduced in #12802.
When we insert entries into dict, it may autonomously expand if needed.
However, when we delete entries from dict, it doesn't shrink to the
proper size. If there are few entries in a very large dict, it may cause
huge waste of memory and inefficiency when iterating.
The main keyspace dicts (keys and expires), are shrinked by cron
(`tryResizeHashTables` calls `htNeedsResize` and `dictResize`),
And some data structures such as zset and hash also do that (call
`htNeedsResize`) right after a loop of calls to `dictDelete`,
But many other dicts are completely missing that call (they can only
expand).
In this PR, we provide the ability to automatically shrink the dict when
deleting. The conditions triggering the shrinking is the same as
`htNeedsResize` used to have. i.e. we expand when we're over 100%
utilization, and shrink when we're below 10% utilization.
Additionally:
* Add `dictPauseAutoResize` so that flows that do mass deletions, will
only trigger shrinkage at the end.
* Rename `dictResize` to `dictShrinkToFit` (same logic as it used to
have, but better name describing it)
* Rename `_dictExpand` to `_dictResize` (same logic as it used to have,
but better name describing it)
related to discussion
https://github.com/redis/redis/pull/12819#discussion_r1409293878
---------
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: zhaozhao.zz <zhaozhao.zz@alibaba-inc.com>
Regarding how to obtain the hash slot of a key, there is an optimization
in `getKeySlot()`, it is used to avoid redundant hash calculations for
keys: when the current client is in the process of executing a command,
it can directly use the slot of the current client because the slot to
access has already been calculated in advance in `processCommand()`.
However, scripts are a special case where, in default mode or with
`allow-cross-slot-keys` enabled, they are allowed to access keys beyond
the pre-declared range. This means that the keys they operate on may not
belong to the slot of the pre-declared keys. Currently, when the
commands in a script are executed, the slot of the original client
(i.e., the current client) is not correctly updated, leading to
subsequent access to the wrong slot.
This PR fixes the above issue. When checking the cluster constraints in
a script, the slot to be accessed by the current command is set for the
original client (i.e., the current client). This ensures that
`getKeySlot()` gets the correct slot cache.
Additionally, the following modifications are made:
1. The 'sort' and 'sort_ro' commands use `getKeySlot()` instead of
`c->slot` because the client could be an engine client in a script and
can lead to potential bug.
2. `getKeySlot()` is also used in pubsub to obtain the slot for the
channel, standardizing the way slots are retrieved.
The test was introduced in #10745, but we forgot to add it to the
test_helper.tcl, so our CI did not actually run it. This PR adds it
and ensures it passes CI tests.
Fix a daily test failure because alpine doesn't support stack traces and
add in an extra assertion related to making sure the stack trace was
printed twice.
This change is trying to make two failure modes a bit easier to deep dive:
1. If a serverPanic or serverAssert occurs during the info (or module)
printing, it will recursively panic, which is a lot of fun as it will
just keep recursively printing. It will eventually stack overflow, but
will generate a lot of text in the process.
2. When a segfault happens during the segfault handler, no information
is communicated other than it happened. This can be problematic because
`info` may help diagnose the real issue, but without fixing the
recursive crash it might be hard to get at that info.
We have achieved replacing `slots_to_keys` radix tree with key->slot
linked list (#9356), and then replacing the list with slot specific
dictionaries for keys (#11695).
Shard channels behave just like keys in many ways, and we also need a
slots->channels mapping. Currently this is still done by using a radix
tree. So we should split `server.pubsubshard_channels` into 16384 dicts
and drop the radix tree, just like what we did to DBs.
Some benefits (basically the benefits of what we've done to DBs):
1. Optimize counting channels in a slot. This is currently used only in
removing channels in a slot. But this is potentially more useful:
sometimes we need to know how many channels there are in a specific slot
when doing slot migration. Counting is now implemented by traversing the
radix tree, and with this PR it will be as simple as calling `dictSize`,
from O(n) to O(1).
2. The radix tree in the cluster has been removed. The shard channel
names no longer require additional storage, which can save memory.
3. Potentially useful in slot migration, as shard channels are logically
split by slots, thus making it easier to migrate, remove or add as a
whole.
4. Avoid rehashing a big dict when there is a large number of channels.
Drawbacks:
1. Takes more memory than using radix tree when there are relatively few
shard channels.
What this PR does:
1. in cluster mode, split `server.pubsubshard_channels` into 16384
dicts, in standalone mode, still use only one dict.
2. drop the `slots_to_channels` radix tree.
3. to save memory (to solve the drawback above), all 16384 dicts are
created lazily, which means only when a channel is about to be inserted
to the dict will the dict be initialized, and when all channels are
deleted, the dict would delete itself.
5. use `server.shard_channel_count` to keep track of the number of all
shard channels.
---------
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
Fix#12792
On ubuntu 23(lunar), non-root users will not be allowed to change the
oom_score_adj of a process to a value that is too low.
Since terminal's default oom_score_adj is 200, if we run the test on
terminal, we won't be able to set the oom_score_adj of the redis process
to 9 or 22, which is too low.
Reproduction on ubuntu 23(lunar) terminal:
```sh
$ cat /proc/`pgrep redis-server`/oom_score_adj
200
$ echo 100 > /proc/`pgrep redis-server`/oom_score_adj
# success without error
$ echo 99 > /proc/`pgrep redis-server`/oom_score_adj
echo: write error: Permission denied
```
As from the output above, we can only set the minimum oom score of redis
processes to 100.
By modifying the test, make oom_score_adj only increase upwards and not
decrease.
---------
Co-authored-by: debing.sun <debing.sun@redis.com>
Previous implementation would disconnect _all_ clients when running `ACL
LOAD`, which wasn't very useful.
This change brings the behavior in line with that of `ACL SETUSER`, `ACL
DELUSER`, in that only clients whose user is deleted or clients
subscribed to channels which they no longer have access to will be
disconnected.
---------
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
This PR, we added -4 and -6 options to redis-cli to determine
IPV4 / IPV6 priority in DNS lookup.
This was mentioned in
https://github.com/redis/redis/pull/11151#issuecomment-1231570651
For now it's only used in CLUSTER MEET.
The options also made it possible to reliably test dns lookup in CI,
using this option, we can add some localhost tests for #11151.
The commit was cherry-picked from #11151, back then we decided to split
the PR.
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
We dont have test for hgetall against key doesnot exist so added the
test in test suite and along with this, added wrong type cases for other
missing commands.
The by/get options of sort/sort_ro command used to be forbidden in
cluster mode, since we are not sure which slot the pattern may be in.
As the optimization done in #12536, patterns now can be mapped to slots,
we should allow by/get options in cluster mode when the pattern maps to
the same slot as the key.
In #11489, we consider acl username to be sensitive information,
and consider the ACL GETUSER a sensitive command and remove it
from redis-cli historyfile.
This PR redact username information in ACL GETUSER and ACL DELUSER
from SLOWLOG, and also remove ACL DELUSER from redis-cli historyfile.
This PR also mark tls-key-file-pass and tls-client-key-file-pass
as sensitive config, will redact it from SLOWLOG and also
remove them from redis-cli historyfile.
In INFO CLIENTS section, we already have blocked_clients and
tracking_clients. We should add a new metric showing the number of
pubsub connections, which helps performance monitoring and trouble
shooting.
This is a follow-up fix to #12733. We need to apply the same changes to
delKeysInSlot. Refer to #12733 for more details.
This PR contains some other minor cleanups / improvements to the test
suite and docs.
It uses the postnotifications test module in a cluster mode test which
revealed a leak in the test module (fixed).
in #12536 we made a similar optimization for SCAN, now that hashtags in
patterns. When we can make sure all keys matching the pettern will be in
the same slot, we can limit the iteration to run only one one.
Warning:
```
postnotifications.c:216:77: warning: format specifies type 'long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
RedisModule_Log(ctx, "warning", "Got an unexpected subevent '%ld'", subevent);
~~~ ^~~~~~~~
%llu
```
CI:
https://github.com/redis/redis/actions/runs/6937308713/job/18871124342#step:6:115
## Other
Add `CFLAGS=-Werror` flag for module CI.
---------
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
The following four configurations are renamed to align with Redis style:
1. server_cpulist renamed to server-cpulist
2. bio_cpulist renamed to bio-cpulist
3. aof_rewrite_cpulist renamed to aof-rewrite-cpulist
4. bgsave_cpulist renamed to bgsave-cpulist
The original names are retained as aliases to ensure compatibility with
old configuration files. We recommend users to gradually transition to
using the new configuration names to maintain consistency in style.
Introduced in #11695 .
The tryResizeHashTables function gets stuck on the last non-empty slot
while iterating through dictionaries. It does not restart from the
beginning. The reason for this issue is a problem with the usage of
dbIteratorNextDict:
/* Returns next dictionary from the iterator, or NULL if iteration is complete. */
dict *dbIteratorNextDict(dbIterator *dbit) {
if (dbit->next_slot == -1) return NULL;
dbit->slot = dbit->next_slot;
dbit->next_slot = dbGetNextNonEmptySlot(dbit->db, dbit->slot, dbit->keyType);
return dbGetDictFromIterator(dbit);
}
When iterating to the last non-empty slot, next_slot is set to -1,
causing it to loop indefinitely on that slot. We need to modify the code
to ensure that after iterating to the last non-empty slot, it returns to
the first non-empty slot.
BTW, function tryResizeHashTables is actually iterating over slots
that have keys. However, in its implementation, it leverages the
dbIterator (which is a key iterator) to obtain slot and dictionary
information. While this approach works fine, but it is not very
intuitive. This PR also improves readability by changing the iteration
to directly iterate over slots, thereby enhancing clarity.
When we register notification or server event in RedisModule_OnLoad, but
RedisModule_OnLoad eventually fails, triggering notification or server
event
will cause the server to crash.
If the loading fails on a later stage of moduleLoad, we do call
moduleUnload
which handles all un-registration, but when it fails on the
RedisModule_OnLoad
call, we only un-register several specific things and these were
missing:
- moduleUnsubscribeNotifications
- moduleUnregisterFilters
- moduleUnsubscribeAllServerEvents
Refactored the code to reuse the code from moduleUnload.
Fixes#12808.
see discussion from after https://github.com/redis/redis/pull/12453 was
merged
----
This PR replaces signals that are not considered async-signal-safe
(AS-safe) with safe calls.
#### **1. serverLog() and serverLogFromHandler()**
`serverLog` uses unsafe calls. It was decided that we will **avoid**
`serverLog` calls by the signal handlers when:
* The signal is not fatal, such as SIGALRM. In these cases, we prefer
using `serverLogFromHandler` which is the safe version of `serverLog`.
Note they have different prompts:
`serverLog`: `62220:M 26 Oct 2023 14:39:04.526 # <msg>`
`serverLogFromHandler`: `62220:signal-handler (1698331136) <msg>`
* The code was added recently. Calls to `serverLog` by the signal
handler have been there ever since Redis exists and it hasn't caused
problems so far. To avoid regression, from now we should use
`serverLogFromHandler`
#### **2. `snprintf` `fgets` and `strtoul`(base = 16) -------->
`_safe_snprintf`, `fgets_async_signal_safe`, `string_to_hex`**
The safe version of `snprintf` was taken from
[here](8cfc4ca5e7/src/mc_util.c (L754))
#### **3. fopen(), fgets(), fclose() --------> open(), read(), close()**
#### **4. opendir(), readdir(), closedir() --------> open(),
syscall(SYS_getdents64), close()**
#### **5. Threads_mngr sync mechanisms**
* waiting for the thread to generate stack trace: semaphore -------->
busy-wait
* `globals_rw_lock` was removed: as we are not using malloc and the
semaphore anymore we don't need to protect `ThreadsManager_cleanups`.
#### **6. Stacktraces buffer**
The initial problem was that we were not able to safely call malloc
within the signal handler.
To solve that we created a buffer on the stack of `writeStacktraces` and
saved it in a global pointer, assuming that under normal circumstances,
the function `writeStacktraces` would complete before any thread
attempted to write to it. However, **if threads lag behind, they might
access this global pointer after it no longer belongs to the
`writeStacktraces` stack, potentially corrupting memory.**
To address this, various solutions were discussed
[here](https://github.com/redis/redis/pull/12658#discussion_r1390442896)
Eventually, we decided to **create a pipe** at server startup that will
remain valid as long as the process is alive.
We chose this solution due to its minimal memory usage, and since
`write()` and `read()` are atomic operations. It ensures that stack
traces from different threads won't mix.
**The stacktraces collection process is now as follows:**
* Cleaning the pipe to eliminate writes of late threads from previous
runs.
* Each thread writes to the pipe its stacktrace
* Waiting for all the threads to mark completion or until a timeout (2
sec) is reached
* Reading from the pipe to print the stacktraces.
#### **7. Changes that were considered and eventually were dropped**
* replace watchdog timer with a POSIX timer:
according to [settimer man](https://linux.die.net/man/2/setitimer)
> POSIX.1-2008 marks getitimer() and setitimer() obsolete, recommending
the use of the POSIX timers API
([timer_gettime](https://linux.die.net/man/2/timer_gettime)(2),
[timer_settime](https://linux.die.net/man/2/timer_settime)(2), etc.)
instead.
However, although it is supposed to conform to POSIX std, POSIX timers
API is not supported on Mac.
You can take a look here at the Linux implementation:
[here](c7562ee135)
To avoid messing up the code, and uncertainty regarding compatibility,
it was decided to drop it for now.
* avoid using sds (uses malloc) in logConfigDebugInfo
It was considered to print config info instead of using sds, however
apparently, `logConfigDebugInfo` does more than just print the sds, so
it was decided this fix is out of this issue scope.
#### **8. fix Signal mask check**
The check `signum & sig_mask` intended to indicate whether the signal is
blocked by the thread was incorrect. Actually, the bit position in the
signal mask corresponds to the signal number. We fixed this by changing
the condition to: `sig_mask & (1L << (sig_num - 1))`
#### **9. Unrelated changes**
both `fork.tcl `and `util.tcl` implemented a function called
`count_log_message` expecting different parameters. This caused
confusion when trying to run daily tests with additional test parameters
to run a specific test.
The `count_log_message` in `fork.tcl` was removed and the calls were
replaced with calls to `count_log_message` located in `util.tcl`
---------
Co-authored-by: Ozan Tezcan <ozantezcan@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
We have some test cases of swapdb with watchkey but missing seperate
basic swapdb test cases, unhappy path and flushdb after swapdb. So added
the test cases in keyspace.tcl.
CI reports that this test failed, the reason is because during
the command processing, the node processed PING/PONG, resulting
in ping_sent or pong_received mismatch.
Change to use MULTI to avoid timing issue. The test was introduced
in #12224.
When using DB iterator, it will use dictInitSafeIterator to init a old safe
dict iterator. When dbIteratorNext is used, it will jump to the next slot db
dict when we are done a dict. During this process, we do not have any calls to
dictResumeRehashing, which causes the dict's pauserehash to always be > 0.
And at last, it will be returned directly in dictRehashMilliseconds, which causes
us to have slot dict in a state where rehash cannot be completed.
In the "expire scan should skip dictionaries with lot's of empty buckets" test,
adding a `keys *` can reproduce the problem stably. `keys *` will call dbIteratorNext
to trigger a traversal of all slot dicts.
Added dbReleaseIterator and dbIteratorInitNextSafeIterator methods to call dictResetIterator.
Issue was introduced in #11695.
Test recently added fails on timeout in valgrind in GH actions.
Locally with valgrind the test finishes within 1.5 sec(s). Couldn't find
any issue due to lack of reproducibility. Increasing the timeout and
adding an additional log to the test to understand how many keys
were left at the end.
Redis 7.2 (#9406) introduced a new modules event, `RedisModuleEvent_Key`.
This new event allows the module to read the key data just before it is removed
from the database (either deleted, expired, evicted, or overwritten).
When the key is removed from the database, either by active expire or eviction.
The new event was not called as part of an execution unit. This can cause an
issue if the module registers a post notification job inside the event. This job will
not be executed atomically with the expiration/eviction operation and will not
replicated inside a Multi/Exec. Moreover, the post notification job will be executed
right after the event where it is still not safe to perform any write operation, this will
violate the promise that post notification job will be called atomically with the
operation that triggered it and **only when it is safe to write**.
This PR fixes the issue by wrapping each expiration/eviction of a key with an execution
unit. This makes sure the entire operation will run atomically and all the post notification
jobs will be executed at the end where it is safe to write.
Tests were modified to verify the fix.
This change overcomes many stability issues experienced with the
vmactions action.
We need to limit VMs to 8GB for better stability, as the 13GB default
seems to hang them occasionally.
Shell code has been simplified since this action seem to use `bash -e`
which will abort on non-zero exit codes anyway.
Reverts the skipping defrag tests in cluster mode (done in #12672.
instead it skips only some defrag tests that are relevant for cluster modes.
The test now run well after investigating and making the changes in #12674 and #12694.
Co-authored-by: Oran Agra <oran@redislabs.com>
Optimize the performance of SCAN commands when a match pattern can only contain keys from a
single slot in cluster mode. This can happen when the pattern contains a hash tag before any
wildcard matchers or when the key contains no matchers.
Test failure on freebsd CI:
```
*** [err]: expire scan should skip dictionaries with lot's of empty buckets in tests/unit/expire.tcl
scan didn't handle slot skipping logic.
```
Observation:
expiry of keys might happen before the empty buckets are formed and won't help with the expiry skip logic validation.
Solution:
Disable expiration until the empty buckets are formed.
Fixing issues started after #11695 when the defrag tests are being executed in cluster mode too.
For some reason, it looks like the defragmentation is over too quickly, before the test is able to
detect that it's running.
so now instead of waiting to see that it's active, we wait to see that it did some work
```
[err]: Active defrag big list: cluster in tests/unit/memefficiency.tcl
defrag not started.
[err]: Active defrag big keys: cluster in tests/unit/memefficiency.tcl
defrag didn't stop.
```
Temporarily disabling few of the defrag tests in cluster mode to make the daily run stable:
Active defrag eval scripts
Active defrag big keys
Active defrag big list
Active defrag edge case
Dictionary iterator logic in the `tryResizeHashTables` method is picking the next
(incorrect) dictionary while the cursor is at a given slot. This could lead to some
dictionary/slot getting skipped from resizing.
Also stabilize the test.
problem introduced recently in #11695
This is an implementation of https://github.com/redis/redis/issues/10589 that eliminates 16 bytes per entry in cluster mode, that are currently used to create a linked list between entries in the same slot. Main idea is splitting main dictionary into 16k smaller dictionaries (one per slot), so we can perform all slot specific operations, such as iteration, without any additional info in the `dictEntry`. For Redis cluster, the expectation is that there will be a larger number of keys, so the fixed overhead of 16k dictionaries will be The expire dictionary is also split up so that each slot is logically decoupled, so that in subsequent revisions we will be able to atomically flush a slot of data.
## Important changes
* Incremental rehashing - one big change here is that it's not one, but rather up to 16k dictionaries that can be rehashing at the same time, in order to keep track of them, we introduce a separate queue for dictionaries that are rehashing. Also instead of rehashing a single dictionary, cron job will now try to rehash as many as it can in 1ms.
* getRandomKey - now needs to not only select a random key, from the random bucket, but also needs to select a random dictionary. Fairness is a major concern here, as it's possible that keys can be unevenly distributed across the slots. In order to address this search we introduced binary index tree). With that data structure we are able to efficiently find a random slot using binary search in O(log^2(slot count)) time.
* Iteration efficiency - when iterating dictionary with a lot of empty slots, we want to skip them efficiently. We can do this using same binary index that is used for random key selection, this index allows us to find a slot for a specific key index. For example if there are 10 keys in the slot 0, then we can quickly find a slot that contains 11th key using binary search on top of the binary index tree.
* scan API - in order to perform a scan across the entire DB, the cursor now needs to not only save position within the dictionary but also the slot id. In this change we append slot id into LSB of the cursor so it can be passed around between client and the server. This has interesting side effect, now you'll be able to start scanning specific slot by simply providing slot id as a cursor value. The plan is to not document this as defined behavior, however. It's also worth nothing the SCAN API is now technically incompatible with previous versions, although practically we don't believe it's an issue.
* Checksum calculation optimizations - During command execution, we know that all of the keys are from the same slot (outside of a few notable exceptions such as cross slot scripts and modules). We don't want to compute the checksum multiple multiple times, hence we are relying on cached slot id in the client during the command executions. All operations that access random keys, either should pass in the known slot or recompute the slot.
* Slot info in RDB - in order to resize individual dictionaries correctly, while loading RDB, it's not enough to know total number of keys (of course we could approximate number of keys per slot, but it won't be precise). To address this issue, we've added additional metadata into RDB that contains number of keys in each slot, which can be used as a hint during loading.
* DB size - besides `DBSIZE` API, we need to know size of the DB in many places want, in order to avoid scanning all dictionaries and summing up their sizes in a loop, we've introduced a new field into `redisDb` that keeps track of `key_count`. This way we can keep DBSIZE operation O(1). This is also kept for O(1) expires computation as well.
## Performance
This change improves SET performance in cluster mode by ~5%, most of the gains come from us not having to maintain linked lists for keys in slot, non-cluster mode has same performance. For workloads that rely on evictions, the performance is similar because of the extra overhead for finding keys to evict.
RDB loading performance is slightly reduced, as the slot of each key needs to be computed during the load.
## Interface changes
* Removed `overhead.hashtable.slot-to-keys` to `MEMORY STATS`
* Scan API will now require 64 bits to store the cursor, even on 32 bit systems, as the slot information will be stored.
* New RDB version to support the new op code for SLOT information.
---------
Co-authored-by: Vitaly Arbuzov <arvit@amazon.com>
Co-authored-by: Harkrishn Patro <harkrisp@amazon.com>
Co-authored-by: Roshan Khatri <rvkhatri@amazon.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
when a server in the test suite crashes and is restarted by redstart_server, we didn't clean it's pid from the list.
we can see that when the corrupt-dump-fuzzer hangs, it has a long list of servers to lean, but in fact they're all already dead.
In #11568 we removed the NOSCRIPT flag from commands and keep the BLOCKING flag.
Aiming to allow them in scripts and let them implicitly behave in the non-blocking way.
In that sense, the old behavior was to allow LPOP and reject BLPOP, and the new behavior,
is to allow BLPOP too, and fail it only in case it ends up blocking.
So likewise, so far we allowed XREAD and rejected XREAD BLOCK, and we will now allow
that too, and only reject it if it ends up blocking.
recently there are some incidents of hanged tests in the CI
when we try to reproduce them, we get an assertion, not a hang.
maybe the server logs will reveal some info.
## Crash fix
### Current behavior
We might crash if we fail to collect some of the threads' output. If it exceeds timeout for example.
The threads mngr API guarantees that the output array length will be `tids_len`, however, some
indices can be NULL, in case it fails to collect some of the threads' outputs.
When we use the threads mngr to collect the threads' stacktraces, we rely on this and skip NULL
entries. Since the output array was allocated with malloc, instead of NULL, it contained garbage,
so we got a segmentation fault when trying to read this garbage. (in debug.c:writeStacktraces() )
### fix
Allocate the global output array with zcalloc.
### To reproduce the bug, you'll have to change the code:
**in threadsmngr:ThreadsManager_runOnThreads():**
make sure the g_output_array allocation is initialized with garbage and not 0s
(add `memset(g_output_array, 2, sizeof(void*) * tids_len);` below the allocation).
Force one of the threads to write to the array:
add a global var: `static redisAtomic size_t return_now = 0;`
add to `invoke_callback()` before writing to the output array:
```
size_t i_return;
atomicGetIncr(return_now, i_return, 1);
if(i_return == 1) return;
```
compile, start the server with `--enable-debug-command local` and run `redis-cli debug assert`
The assertion triggers the the stacktrace collection.
Expect to get 2 prints of the stack trace - since we get the segmentation fault after we return from
the threads mngr, it can be safely triggered again.
## Added global variables r/w lock in ThreadsManager
To avoid a situation where the main thread runs `ThreadsManager_cleanups` while threads are still
invoking the signal handler, we use a r/w lock.
For cleanups, we will acquire the write lock.
The threads will acquire the read lock to enable them to write simultaneously.
If we fail to acquire the read lock, it means cleanups are in progress and we return immediately.
After acquiring the lock we can safely check that the global output array wasn't nullified and proceed
to write to it.
This way we ensure the threads are not modifying the global variables/ trying to write to the output
array after they were zeroed/nullified/destroyed(the semaphore).
## other minor logging change
1. removed logging if the semaphore times out because the threads can still write to the output array
after this check. Instead, we print the total number of printed stacktraces compared to the exacted
number (len_tids).
2. use noinline attribute to make sure the uplevel number of ignored stack trace entries stays correct.
3. improve testing
Co-authored-by: Oran Agra <oran@redislabs.com>
In some tests, the code manually searches for a log message, and it
uses tail -1 with a delay of 1 second, which can miss the expected line.
Also, because the aof tests use start_server_aof and not start_server,
the test name doesn't log into the server log.
To fix the above, I made the following changes:
- Change the start_server_aof to wrap the start_server.
This will add the created aof server to the servers list, and make
srv() and wait_for_log_messages() available for the tests.
- Introduce a new option for start_server.
'wait_ready' - an option to let the caller start the test code without
waiting for the server to be ready. useful for tests on a server that
is expected to exit on startup.
- Create a new start_server_aof_ex.
The new proc also accept options as argument and make use of the
new 'short_life' option for tests that are expected to exit on startup
because of some error in the aof file(s).
Because of the above, I had to change many lines and replace every
local srv variable (a server config) usage with the srv().
The problem is that WAITAOF could have hang in case commands were
propagated only to replicas.
This can happen if a module uses RM_Call with the REDISMODULE_ARGV_NO_AOF flag.
In that case, master_repl_offset would increase, but there would be nothing to fsync, so
in the absence of other traffic, fsynced_reploff_pending would stay the static, and WAITAOF can hang.
This commit updates fsynced_reploff_pending to the latest offset in flushAppendOnlyFile in case
there's nothing to fsync. i.e. in case it's behind because of the above mentions case it'll be refreshed
and release the WAITAOF.
Other changes:
Fix a race in wait.tcl (client getting blocked vs. the fsync thread)
If we set `fsynced_reploff_pending` in `startAppendOnly`, and the fork doesn't start
immediately (e.g. there's another fork active at the time), any subsequent commands
will increment `server.master_repl_offset`, but will not cause a fsync (given they were
executed before the fork started, they just ended up in the RDB part of it)
Therefore, any WAITAOF will wait on the new master_repl_offset, but it will time out
because no fsync will be executed.
Release notes:
```
WAITAOF could timeout in the absence of write traffic in case a new AOF is created and
an AOFRW can't immediately start.
This can happen by the appendonly config is changed at runtime, but also after FLUSHALL,
and replica full sync.
```
In this PR we are adding the functionality to collect all the process's threads' backtraces.
## Changes made in this PR
### **introduce threads mngr API**
The **threads mngr API** which has 2 abilities:
* `ThreadsManager_init() `- register to SIGUSR2. called on the server start-up.
* ` ThreadsManager_runOnThreads()` - receives a list of a pid_t and a callback, tells every
thread in the list to invoke the callback, and returns the output collected by each invocation.
**Elaborating atomicvar API**
* `atomicIncrGet(var,newvalue_var,count) `-- Increment and get the atomic counter new value
* `atomicFlagGetSet` -- Get and set the atomic counter value to 1
### **Always set SIGALRM handler**
SIGALRM handler prints the process's stacktrace to the log file. Up until now, it was set only if the
`server.watchdog_period` > 0. This can be also useful if debugging is needed. However, in situations
where the server can't get requests, (a deadlock, for example) we weren't able to change the signal handler.
To make it available at run time we set SIGALRM handler on server startup. The signal handler name was
changed to a more general `sigalrmSignalHandler`.
### **Print all the process' threads' stacktraces**
`logStackTrace()` now calls `writeStacktraces()`, instead of logging the current thread stacktrace.
`writeStacktraces()`:
* On Linux systems we use the threads manager API to collect the backtraces of all the process' threads.
To get the `tids` list (threads ids) we read the `/proc/<redis-server-pid>/tasks` file which includes a list of directories.
Each directory name corresponds to one tid (including the main thread). For each thread, we also need to check if it
can get the signal from the threads manager (meaning it is not blocking/ignoring that signal). We send the threads
manager this tids list and `collect_stacktrace_data()` callback, which collects the thread's backtrace addresses,
its name, and tid.
* On other systems, the behavior remained as it was (writing only the current thread stacktrace to the log file).
## compatibility notes
1. **The threads mngr API is only supported in linux.**
2. glibc earlier than 2.3 We use `syscall(SYS_gettid)` and `syscall(SYS_tgkill...)` because their dedicated
alternatives (`gettid()` and `tgkill`) were added in glibc 2.3.
## Output example
Each thread backtrace will have the following format:
`<tid> <thread_name> [additional_info]`
* **tid**: as read from the `/proc/<redis-server-pid>/tasks` file
* **thread_name**: the tread name as it is registered in the os/
* **additional_info**: Sometimes we want to add specific information about one of the threads. currently.
it is only used to mark the thread that handles the backtraces collection by adding "*".
In case of crash - this also indicates which thread caused the crash. The handling thread in won't
necessarily appear first.
```
------ STACK TRACE ------
EIP:
/lib/aarch64-linux-gnu/libc.so.6(epoll_pwait+0x9c)[0xffffb9295ebc]
67089 redis-server *
linux-vdso.so.1(__kernel_rt_sigreturn+0x0)[0xffffb9437790]
/lib/aarch64-linux-gnu/libc.so.6(epoll_pwait+0x9c)[0xffffb9295ebc]
redis-server *:6379(+0x75e0c)[0xaaaac2fe5e0c]
redis-server *:6379(aeProcessEvents+0x18c)[0xaaaac2fe6c00]
redis-server *:6379(aeMain+0x24)[0xaaaac2fe7038]
redis-server *:6379(main+0xe0c)[0xaaaac3001afc]
/lib/aarch64-linux-gnu/libc.so.6(+0x273fc)[0xffffb91d73fc]
/lib/aarch64-linux-gnu/libc.so.6(__libc_start_main+0x98)[0xffffb91d74cc]
redis-server *:6379(_start+0x30)[0xaaaac2fe0370]
67093 bio_lazy_free
/lib/aarch64-linux-gnu/libc.so.6(+0x79dfc)[0xffffb9229dfc]
/lib/aarch64-linux-gnu/libc.so.6(pthread_cond_wait+0x208)[0xffffb922c8fc]
redis-server *:6379(bioProcessBackgroundJobs+0x174)[0xaaaac30976e8]
/lib/aarch64-linux-gnu/libc.so.6(+0x7d5c8)[0xffffb922d5c8]
/lib/aarch64-linux-gnu/libc.so.6(+0xe5d1c)[0xffffb9295d1c]
67091 bio_close_file
/lib/aarch64-linux-gnu/libc.so.6(+0x79dfc)[0xffffb9229dfc]
/lib/aarch64-linux-gnu/libc.so.6(pthread_cond_wait+0x208)[0xffffb922c8fc]
redis-server *:6379(bioProcessBackgroundJobs+0x174)[0xaaaac30976e8]
/lib/aarch64-linux-gnu/libc.so.6(+0x7d5c8)[0xffffb922d5c8]
/lib/aarch64-linux-gnu/libc.so.6(+0xe5d1c)[0xffffb9295d1c]
67092 bio_aof
/lib/aarch64-linux-gnu/libc.so.6(+0x79dfc)[0xffffb9229dfc]
/lib/aarch64-linux-gnu/libc.so.6(pthread_cond_wait+0x208)[0xffffb922c8fc]
redis-server *:6379(bioProcessBackgroundJobs+0x174)[0xaaaac30976e8]
/lib/aarch64-linux-gnu/libc.so.6(+0x7d5c8)[0xffffb922d5c8]
/lib/aarch64-linux-gnu/libc.so.6(+0xe5d1c)[0xffffb9295d1c]
67089:signal-handler (1693824528) --------
```
Recently, the option of sending an argument from stdin using `-x` flag
was added to redis-benchmark (this option is available in redis-cli as well).
However, using the `-x` option for sending a blobs that contains null-characters
doesn't work as expected - the argument is trimmed in the first occurrence of
`\X00` (unlike in redis-cli).
This PR aims to fix this issue and add the support for every binary string input,
by sending arguments length to `redisFormatCommandArgv` when processing
redis-benchmark command, so we won't treat the arguments as C-strings.
Additionally, we add a simple test coverage for `-x` (without binary strings, and
also remove an excessive server started in tests, and make sure to select db 0
so that `r` and the benchmark work on the same db.
Co-authored-by: Oran Agra <oran@redislabs.com>
The new test added in #12476 causes reply-schemas-validator to fail.
When doing `catch {r get key}`, the req-res output is:
```
3
get
3
key
12
__argv_end__
$100000
aaaaaaaaaaaaaaaaaaaa...4
info
5
stats
12
__argv_end__
=1670
txt:# Stats
...
```
And we can see the link after `$100000`, there is a 4 in the last,
it break the req-res-log-validator script since the format is wrong.
The reason i guess is after the client reconnection (after the output
buf limit), we will not add newlines, but append args directly.
Since obuf-limits.tcl is doing the same thing, and it had the logreqres:skip
flag, so this PR is following it.
ZRANGE BYSCORE/BYLEX with [LIMIT offset count] option was
using every level in skiplist to jump to the first/last node in range,
but only use level[0] in skiplist to locate the node at offset, resulting
in sub-optimal performance using LIMIT:
```
while (ln && offset--) {
if (reverse) {
ln = ln->backward;
} else {
ln = ln->level[0].forward;
}
}
```
It could be slow when offset is very big. We can get the total rank of
the offset location and use skiplist to jump to it. It is an improvement
from O(offset) to O(log rank).
Below shows how this is implemented (if the offset is positve):
Use the skiplist to seach for the first element in the range, record its
rank `rank_0`, so we can have the rank of the target node `rank_t`.
Meanwhile we record the last node we visited which has zsl->level-1
levels and its rank `rank_1`. Then we start from the zsl->level-1 node,
use skiplist to go forward `rank_t-rank_1` nodes to reach the target node.
It is very similiar when the offset is reversed.
Note that if `rank_t` is very close to `rank_0`, we just start from the first
element in range and go node by node, this for the case when zsl->level-1
node is to far away and it is quicker to reach the target node by node.
Here is a test using a random generated zset including 10000 elements
(with different positive scores), doing a bench mark which compares how
fast the `ZRANGE` command is exucuted before and after the optimization.
The start score is set to 0 and the count is set to 1 to make sure that
most of the time is spent on locating the offset.
```
memtier_benchmark -h 127.0.0.1 -p 6379 --command="zrange test 0 +inf byscore limit <offset> 1"
```
| offset | QPS(unstable) | QPS(optimized) |
|--------|--------|--------|
| 10 | 73386.02 | 74819.82 |
| 1000 | 48084.96 | 73177.73 |
| 2000 | 31156.79 | 72805.83 |
| 5000 | 10954.83 | 71218.21 |
With the result above, we can see that the original code is greatly
slowed down when offset gets bigger, and with the optimization the
speed is almost not affected.
Similiar results are generated when testing reversed offset:
```
memtier_benchmark -h 127.0.0.1 -p 6379 --command="zrange test +inf 0 byscore rev limit <offset> 1"
```
| offset | QPS(unstable) | QPS(optimized) |
|--------|--------|--------|
| 10 | 74505.14 | 71653.67 |
| 1000 | 46829.25 | 72842.75 |
| 2000 | 28985.48 | 73669.01 |
| 5000 | 11066.22 | 73963.45 |
And the same conclusion is drawn from the tests of ZRANGE BYLEX.
This PR adds a new Module API int RM_AddACLCategory(RedisModuleCtx *ctx, const char *category_name) to add a new ACL command category.
Here, we initialize the ACLCommandCategories array by allocating space for 64 categories and duplicate the 21 default categories from the predefined array 'ACLDefaultCommandCategories' into the ACLCommandCategories array while ACL initialization. Valid ACL category names can only contain alphanumeric characters, underscores, and dashes.
The API when called, checks for the onload flag, category name validity, and for duplicate category name if present. If the conditions are satisfied, the API adds the new category to the trailing end of the ACLCommandCategories array and assigns the acl_categories flag bit according to the index at which the category is added.
If any error is encountered the errno is set accordingly by the API.
---------
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Add these INFO metrics:
* client_query_buffer_limit_disconnections
* client_output_buffer_limit_disconnections
Sometimes it is useful to monitor whether clients reaches size limit of
query buffer and output buffer, to decide whether we need to adjust the
buffer size limit or reduce client query payload.
This test failed several times:
```
*** [err]: LATENCY GRAPH can output the event graph in tests/unit/latency-monitor.tcl
Expected '478' to be more than or equal to '500' (context: type eval
line 8 cmd {assert_morethan_equal $high 500} proc ::test)
```
Not sure why, adding some verbose printing that'll print the command
result on the next time.
BITCOUNT and BITPOS with non-existing key will return 0 even the
arguments are error, before this commit:
```
> flushall
OK
> bitcount s 0
(integer) 0
> bitpos s 0 0 1 hello
(integer) 0
> set s 1
OK
> bitcount s 0
(error) ERR syntax error
> bitpos s 0 0 1 hello
(error) ERR syntax error
```
The reason is that we judged non-existing before parameter checking and
returned. This PR fixes it, and after this commit:
```
> flushall
OK
> bitcount s 0
(error) ERR syntax error
> bitpos s 0 0 1 hello
(error) ERR syntax error
```
Also BITPOS made the same fix as #12394, check for wrong argument, before
checking for key.
```
> lpush mylist a b c
(integer) 3
> bitpos mylist 1 a b
(error) WRONGTYPE Operation against a key holding the wrong kind of value
```
Generally, In any command we first check for the argument and then check if key exist.
Some of the examples are
```
127.0.0.1:6379> getrange no-key invalid1 invalid2
(error) ERR value is not an integer or out of range
127.0.0.1:6379> setbit no-key 1 invalid
(error) ERR bit is not an integer or out of range
127.0.0.1:6379> xrange no-key invalid1 invalid2
(error) ERR Invalid stream ID specified as stream command argument
```
**Before change**
```
bitcount no-key invalid1 invalid2
0
```
**After change**
```
bitcount no-key invalid1 invalid2
(error) ERR value is not an integer or out of range
```
In our test case, now we missed some test coverage for client sub-commands.
This pr goal is to add some test coverage cases of the following commands:
Client caching
Client kill
Client no-evict
Client pause
Client reply
Client tracking
Client setname
At the very least, this is useful to make sure there are no leaks and crashes in these code paths.
When adding a new ACL rule was added, an attempt was made to remove
any "overlapping" rules. However, there when a match was found, the search
was not resumed at the right location, but instead after the original position of
the original command.
For example, if the current rules were `-config +config|get` and a rule `+config`
was added. It would identify that `-config` was matched, but it would skip over
`+config|get`, leaving the compacted rule `-config +config`. This would be evaluated
safely, but looks weird.
This bug can only be triggered with subcommands, since that is the only way to
have sequential matching rules. Resolves#12470. This is also only present in 7.2.
I think there was also a minor risk of removing another valid rule, since it would start
the search of the next command at an arbitrary point. I couldn't find a valid offset that
would have cause a match using any of the existing commands that have subcommands
with another command.
Fix the assertion when a busy script (timeout) signal ready keys (like LPUSH),
and then an arbitrary client's `allow-busy` command steps into `handleClientsBlockedOnKeys`
try wake up clients blocked on keys (like BLPOP).
Reproduction process:
1. start a redis with aof
`./redis-server --appendonly yes`
2. exec blpop
`127.0.0.1:6379> blpop a 0`
3. use another client call a busy script and this script push the blocked key
`127.0.0.1:6379> eval "redis.call('lpush','a','b') while(1) do end" 0`
4. user a new client call an allow-busy command like auth
`127.0.0.1:6379> auth a`
BTW, this issue also break the atomicity of script.
This bug has been around for many years, the old versions only have the
atomic problem, only 7.0/7.2 has the assertion problem.
Co-authored-by: Oran Agra <oran@redislabs.com>
This PR mainly fixes a possible integer overflow in `json_append_string()`.
When we use `cjson.encoding()` to encode a string larger than 2GB, at specific
compilation flags, an integer overflow may occur leading to truncation, resulting
in the part of the string larger than 2GB not being encoded.
On the other hand, this overflow doesn't cause any read or write out-of-range or segment fault.
1) using -O0 for lua_cjson (`make LUA_DEBUG=yes`)
In this case, `i` will overflow and leads to truncation.
When `i` reaches `INT_MAX+1` and overflows to INT_MIN, when compared to
len, `i` (1000000..00) is expanded to 64 bits signed integer (1111111.....000000) .
At this point i will be greater than len and jump out of the loop, so `for (i = 0; i < len; i++)`
will loop up to 2^31 times, and the part of larger than 2GB will be truncated.
```asm
`i` => -0x24(%rbp)
<+253>: addl $0x1,-0x24(%rbp) ; overflow if i large than 2^31
<+257>: mov -0x24(%rbp),%eax
<+260>: movslq %eax,%rdx ; move a 32-bit value with sign extension into a 64-bit signed
<+263>: mov -0x20(%rbp),%rax
<+267>: cmp %rax,%rdx ; check `i < len`
<+270>: jb 0x212600 <json_append_string+148>
```
2) using -O2/-O3 for lua_cjson (`make LUA_DEBUG=no`, **the default**)
In this case, because singed integer overflow is an undefined behavior, `i` will not overflow.
`i` will be optimized by the compiler and use 64-bit registers for all subsequent instructions.
```asm
<+180>: add $0x1,%rbx ; Using 64-bit register `rbx` for i++
<+184>: lea 0x1(%rdx),%rsi
<+188>: mov %rsi,0x10(%rbp)
<+192>: mov %al,(%rcx,%rdx,1)
<+195>: cmp %rbx,(%rsp) ; check `i < len`
<+199>: ja 0x20b63a <json_append_string+154>
```
3) using 32bit
Because `strbuf_ensure_empty_length()` preallocates memory of length (len * 6 + 2),
in 32-bit `cjson.encode()` can only handle strings smaller than ((2 ^ 32) - 3 ) / 6.
So 32bit is not affected.
Also change `i` in `strbuf_append_string()` to `size_t`.
Since its second argument `str` is taken from the `char2escape` string array which is never
larger than 6, so `strbuf_append_string()` is not at risk of overflow (the bug was unreachable).
When doing merge selector, we should check whether the merge
has started (i.e., whether open_bracket_start is -1) every time.
Otherwise, encountering an illegal selector pattern could succeed
and also cause memory leaks, for example:
```
acl setuser test1 (+PING (+SELECT (+DEL )
```
The above would leak memory and succeed with only DEL being applied,
and would now error after the fix.
Co-authored-by: Oran Agra <oran@redislabs.com>
Additional test coverage for incr/decr operation.
integer number could be present in raw encoding format due to operation like append. A incr/decr operation following it optimize the string to int encoding format.
When the redis server cluster running on cluster-preferred-endpoint-type unknown-endpoint mode, and receive a request that should be redirected to another redis server node, it does not reply the hostip, but a empty host like MOVED 3999 :6381.
The redis-cli would try to connect to an address without a host, which cause the issue:
```
127.0.0.1:7002> set bar bar
-> Redirected to slot [5061] located at :7000
Could not connect to Redis at :7000: No address associated with hostname
Could not connect to Redis at :7000: No address associated with hostname
not connected> exit
```
In this case, the redis-cli should use the previous hostip when there's no host provided by the server.
---------
Co-authored-by: Viktor Söderqvist <viktor.soderqvist@est.tech>
Co-authored-by: Madelyn Olson <madelynolson@gmail.com>
* Fix integer overflows due to using wrong integer size.
* Add assertions / panic when overflow still happens.
* Deletion of dead code to avoid need to maintain it
* Some changes are not because of bugs, but rather paranoia.
* Improve cmsgpack and cjson test coverage.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
Process loss of slot ownership in cluster bus
When a node no longer owns a slot, it clears the bit corresponding
to the slot in the cluster bus messages. The receiving nodes
currently don't record the fact that the sender stopped claiming
a slot until some other node in the cluster starts claiming the slot.
This can cause a slot to go missing during slot migration when subjected
to inopportune race with addition of new shards or a failover.
This fix forces the receiving nodes to process the loss of ownership
to avoid spreading wrong information.
The test fails on freebsd CI:
```
*** [err]: stats: eventloop metrics in tests/unit/info.tcl
Expected '31777' to be less than '16183' (context: type eval line 17 cmd
{assert_lessthan $el_sum2 [expr $el_sum1+10000] } proc ::test)
```
The test added in #11963, fails on freebsd CI which is slow,
increase tollerance and also add some verbose logs, now we can
see these logs in verbose mode (for better views):
```
eventloop metrics cycle1: 12, cycle2: 15
eventloop metrics el_sum1: 315, el_sum2: 411
eventloop metrics cmd_sum1: 126, cmd_sum2: 137
[ok]: stats: eventloop metrics (111 ms)
instantaneous metrics instantaneous_eventloop_cycles_per_sec: 8
instantaneous metrics instantaneous_eventloop_duration_usec: 55
[ok]: stats: instantaneous metrics (1603 ms)
[ok]: stats: debug metrics (112 ms)
```
When getKeysUsingKeySpecs processes a command with more than one key-spec,
and called with a total of more than 256 keys, it'll call getKeysPrepareResult again,
but since numkeys isn't updated, getKeysPrepareResult will not bother to copy key
names from the old result (leaving these slots uninitialized). Furthermore, it did not
consider the keys it already found when allocating more space.
Co-authored-by: Oran Agra <oran@redislabs.com>
The negative offset check was added in #9052, we realized
that this is a non-mandatory breaking change and we would
like to add it only in 8.0.
This reverts PR #9052, will be re-introduced later in 8.0.
Optimized the performance of the SCAN command in a few ways:
1. Move the key filtering (by MATCH pattern) in the scan callback,
so as to avoid collecting them for later filtering.
2. Reduce a many memory allocations and copying (use a reference
to the original sds, instead of creating an robj, an excessive 2 mallocs
and one string duplication)
3. Compare TYPE filter directly (as integers), instead of inefficient string
compare per key.
4. fixed a small bug: when scan zset and hash types, maxiterations uses
a more accurate number to avoid wrong double maxiterations.
Changes **postponed** for a later version (8.0):
1. Prepare to move the TYPE filtering to the scan callback as well. this was
put on hold since it has side effects that can be considered a breaking
change, which is that we will not attempt to do lazy expire (delete) a key
that was filtered by not matching the TYPE (changing it would mean TYPE filter
starts behaving the same as MATCH filter already does in that respect).
2. when the specified key TYPE filter is an unknown type, server will reply a error
immediately instead of doing a full scan that comes back empty handed.
Benchmark result:
For different scenarios, we obtained about 30% or more performance improvement.
Co-authored-by: Oran Agra <oran@redislabs.com>
Originally, when "tls-cluster" is enabled, `port` is set to TLS port. In order to support non-TLS clients, `pport` is used to propagate TCP port across cluster nodes. However when "tls-cluster" is disabled, `port` is set to TCP port, and `pport` is not used, which means the cluster cannot provide TLS service unless "tls-cluster" is on.
```
typedef struct {
// ...
uint16_t port; /* Latest known clients port (TLS or plain). */
uint16_t pport; /* Latest known clients plaintext port. Only used if the main clients port is for TLS. */
// ...
} clusterNode;
```
```
typedef struct {
// ...
uint16_t port; /* TCP base port number. */
uint16_t pport; /* Sender TCP plaintext port, if base port is TLS */
// ...
} clusterMsg;
```
This PR renames `port` and `pport` in `clusterNode` to `tcp_port` and `tls_port`, to record both ports no matter "tls-cluster" is enabled or disabled.
This allows to provide TLS service to clients when "tls-cluster" is disabled: when displaying cluster topology, or giving `MOVED` error, server can provide TLS or TCP port according to client's connection type, no matter what type of connection cluster bus is using.
For backwards compatibility, `port` and `pport` in `clusterMsg` are preserved, when "tls-cluster" is enabled, `port` is set to TLS port and `pport` is set to TCP port, when "tls-cluster" is disabled, `port` is set to TCP port and `pport` is set to TLS port (instead of 0).
Also, in the nodes.conf file, a new aux field displaying an extra port is added to complete the persisted info. We may have `tls_port=xxxxx` or `tcp_port=xxxxx` in the aux field, to complete the cluster topology, while the other port is stored in the normal `<ip>:<port>` field. The format is shown below.
```
<node-id> <ip>:<tcp_port>@<cport>,<hostname>,shard-id=...,tls-port=6379 myself,master - 0 0 0 connected 0-1000
```
Or we can switch the position of two ports, both can be correctly resolved.
```
<node-id> <ip>:<tls_port>@<cport>,<hostname>,shard-id=...,tcp-port=6379 myself,master - 0 0 0 connected 0-1000
```
blocking RM_Call was introduced on: #11568, It allows a module to perform
blocking commands and get the reply asynchronously.If the command gets
block, a special promise CallReply is returned that allow to set the unblock
handler. The unblock handler will be called when the command invocation
finish and it gets, as input, the command real reply.
The issue was that the real CallReply was created using a stack allocated
RedisModuleCtx which is no longer available after the unblock handler finishes.
So if the module keeps the CallReply after the unblock handler finished, the
CallReply holds a pointer to invalid memory and will try to access it when the
CallReply will be released.
The solution is to create the CallReply with a NULL context to make it totally
detached and can be freed freely when the module wants.
Test was added to cover this case, running the test with valgrind before the
fix shows the use after free error. With the fix, there are no valgrind errors.
unrelated: adding a missing `$rd close` in many tests in that file.
Apart from adding the missing coverage, this PR also adds `blockedBeforeSleep`
that gathers all block-related functions from `beforeSleep`
The order inside `blockedBeforeSleep` is different: now `handleClientsBlockedOnKeys`
(which may unblock clients) is called before `processUnblockedClients` (which handles
unblocked clients).
It makes sense to have this order.
There are no visible effects of the wrong ordering, except some cleanups of the now-unblocked
client would have happen in the next `beforeSleep` (will now happen in the current one)
The reason we even got into it is because i triggers an assertion in logresreq.c (breaking
the assumption that `unblockClient` is called **before** actually flushing the reply to the socket):
`handleClientsBlockedOnKeys` is called, then it calls `moduleUnblockClientOnKey`, which calls
`moduleUnblockClient`, which adds the client to `moduleUnblockedClients` back to `beforeSleep`,
we call `handleClientsWithPendingWritesUsingThreads`, it writes the data of buf to the client, so
`client->bufpos` became 0
On the next `beforeSleep`, we call `moduleHandleBlockedClients`, which calls `unblockClient`,
which calls `reqresAppendResponse`, triggering the assert. (because the `bufpos` is 0) - see https://github.com/redis/redis/pull/12301#discussion_r1226386716
To determine when everything was stable, we couldn't just query the nodename since they aren't API visible by design. Instead, we were using a proxy piece of information which was bumping the epoch and waiting for everyone to observe that. This works for making source Node 0 and Node 1 had pinged, and Node 0 and Node 2 had pinged, but did not guarantee that Node 1 and Node 2 had pinged. Although unlikely, this can cause this failure message. To fix it I hijacked hostnames and used its validation that it has been propagated, since we know that it is stable.
I also noticed while stress testing this sometimes the test took almost 4.5 seconds to finish, which is really close to the current 5 second limit of the log check, so I bumped that up as well just to make it a bit more consistent.
Introduced by https://github.com/redis/redis/pull/11923 (Redis 7.2 RC2)
It's very weird and counterintuitive that `RM_ReplyWithError` requires the error-code
**without** a hyphen while `RM_ReplyWithErrorFormat` requires either the error-code
**with** a hyphen or no error-code at all
```
RedisModule_ReplyWithError(ctx, "BLA bla bla");
```
vs.
```
RedisModule_ReplyWithErrorFormat(ctx, "-BLA %s", "bla bla");
```
This commit aligns RM_ReplyWithErrorFormat to behvae like RM_ReplyWithError.
it's a breaking changes but it's done before 7.2 goes GA.
When a connection that's subscribe to a channel emits PUBLISH inside MULTI-EXEC,
the push notification messes up the EXEC response.
e.g. MULTI, PING, PUSH foo bar, PING, EXEC
the EXEC's response will contain: PONG, {message foo bar}, 1. and the second PONG
will be delivered outside the EXEC's response.
Additionally, this PR changes the order of responses in case of a plain PUBLISH (when
the current client also subscribed to it), by delivering the push after the command's
response instead of before it.
This also affects modules calling RM_PublishMessage in a similar way, so that we don't
run the risk of getting that push mixed together with the module command's response.
Now we will check the offset in zrangeGenericCommand.
With a negative offset, we will throw an error and return.
This also resolve the issue of zeroing the destination key
in case of the "store" variant when we input a negative offset.
```
127.0.0.1:6379> set key value
OK
127.0.0.1:6379> zrangestore key myzset 0 10 byscore limit -1 10
(integer) 0
127.0.0.1:6379> exists key
(integer) 0
```
This change affects the following commands:
- ZRANGE / ZRANGESTORE / ZRANGEBYLEX / ZRANGEBYSCORE
- ZREVRANGE / ZREVRANGEBYSCORE / ZREVRANGEBYLEX
For geosearch and georadius we have already test coverage for wrong type, but we dont have for geodist, geohash, geopos commands. So adding the wrong type test cases for geodist, geohash, geopos commands.
Existing code, we have verify_geo_edge_response_bymember function for wrong type test cases which has member as an option. But the function is being called in other test cases where the output is not inline with these commnds(geodist, geohash, geopos). So I could not include these commands(geodist, geohash, geopos) as part of existing function, hence implemented a new function verify_geo_edge_response_generic and called from the test case.
Observed that the sanitizer reported memory leak as clean up is not done
before the process termination in negative/following cases:
**- when we passed '--invalid' as option to redis-server.**
```
-vm:~/mem-leak-issue/redis$ ./src/redis-server --invalid
*** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
Reading the configuration file, at line 2
>>> 'invalid'
Bad directive or wrong number of arguments
=================================================================
==865778==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x7f0985f65867 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x558ec86686ec in ztrymalloc_usable_internal /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:117
#2 0x558ec86686ec in ztrymalloc_usable /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:135
#3 0x558ec86686ec in ztryrealloc_usable_internal /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:276
#4 0x558ec86686ec in zrealloc /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:327
#5 0x558ec865dd7e in sdssplitargs /home/ubuntu/mem-leak-issue/redis/src/sds.c:1172
#6 0x558ec87a1be7 in loadServerConfigFromString /home/ubuntu/mem-leak-issue/redis/src/config.c:472
#7 0x558ec87a13b3 in loadServerConfig /home/ubuntu/mem-leak-issue/redis/src/config.c:718
#8 0x558ec85e6f15 in main /home/ubuntu/mem-leak-issue/redis/src/server.c:7258
#9 0x7f09856e5d8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
SUMMARY: AddressSanitizer: 8 byte(s) leaked in 1 allocation(s).
```
**- when we pass '--port' as option and missed to add port number to redis-server.**
```
vm:~/mem-leak-issue/redis$ ./src/redis-server --port
*** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
Reading the configuration file, at line 2
>>> 'port'
wrong number of arguments
=================================================================
==865846==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 8 byte(s) in 1 object(s) allocated from:
#0 0x7fdcdbb1f867 in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x557e8b04f6ec in ztrymalloc_usable_internal /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:117
#2 0x557e8b04f6ec in ztrymalloc_usable /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:135
#3 0x557e8b04f6ec in ztryrealloc_usable_internal /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:276
#4 0x557e8b04f6ec in zrealloc /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:327
#5 0x557e8b044d7e in sdssplitargs /home/ubuntu/mem-leak-issue/redis/src/sds.c:1172
#6 0x557e8b188be7 in loadServerConfigFromString /home/ubuntu/mem-leak-issue/redis/src/config.c:472
#7 0x557e8b1883b3 in loadServerConfig /home/ubuntu/mem-leak-issue/redis/src/config.c:718
#8 0x557e8afcdf15 in main /home/ubuntu/mem-leak-issue/redis/src/server.c:7258
#9 0x7fdcdb29fd8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
Indirect leak of 10 byte(s) in 1 object(s) allocated from:
#0 0x7fdcdbb1fc18 in __interceptor_realloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:164
#1 0x557e8b04f9aa in ztryrealloc_usable_internal /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:287
#2 0x557e8b04f9aa in ztryrealloc_usable /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:317
#3 0x557e8b04f9aa in zrealloc_usable /home/ubuntu/mem-leak-issue/redis/src/zmalloc.c:342
#4 0x557e8b033f90 in _sdsMakeRoomFor /home/ubuntu/mem-leak-issue/redis/src/sds.c:271
#5 0x557e8b033f90 in sdsMakeRoomFor /home/ubuntu/mem-leak-issue/redis/src/sds.c:295
#6 0x557e8b033f90 in sdscatlen /home/ubuntu/mem-leak-issue/redis/src/sds.c:486
#7 0x557e8b044e1f in sdssplitargs /home/ubuntu/mem-leak-issue/redis/src/sds.c:1165
#8 0x557e8b188be7 in loadServerConfigFromString /home/ubuntu/mem-leak-issue/redis/src/config.c:472
#9 0x557e8b1883b3 in loadServerConfig /home/ubuntu/mem-leak-issue/redis/src/config.c:718
#10 0x557e8afcdf15 in main /home/ubuntu/mem-leak-issue/redis/src/server.c:7258
#11 0x7fdcdb29fd8f in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
SUMMARY: AddressSanitizer: 18 byte(s) leaked in 2 allocation(s).
```
As part analysis found that the sdsfreesplitres is not called when this condition checks are being hit.
Output after the fix:
```
vm:~/mem-leak-issue/redis$ ./src/redis-server --invalid
*** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
Reading the configuration file, at line 2
>>> 'invalid'
Bad directive or wrong number of arguments
vm:~/mem-leak-issue/redis$
===========================================
vm:~/mem-leak-issue/redis$ ./src/redis-server --jdhg
*** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
Reading the configuration file, at line 2
>>> 'jdhg'
Bad directive or wrong number of arguments
---------------------------------------------------------------------------
vm:~/mem-leak-issue/redis$ ./src/redis-server --port
*** FATAL CONFIG FILE ERROR (Redis 255.255.255) ***
Reading the configuration file, at line 2
>>> 'port'
wrong number of arguments
```
Co-authored-by: Oran Agra <oran@redislabs.com>
Adds API
- RedisModule_CommandFilterGetClientId()
Includes addition to commandfilter test module to validate that it works
by performing the same command from 2 different clients
This PR adds a human readable name to a node in clusters that are visible as part of error logs. This is useful so that admins and operators of Redis cluster have better visibility into failures without having to cross-reference the generated ID with some logical identifier (such as pod-ID or EC2 instance ID). This is mentioned in #8948. Specific nodenames can be set by using the variable cluster-announce-human-nodename. The nodename is gossiped using the clusterbus extension in #9530.
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
## Issue:
When a dict has a long chain or the length of the chain is longer than
the number of samples, we will never be able to sample the elements
at the end of the chain using dictGetSomeKeys().
This could mean that SRANDMEMBER can be hang in and endless loop.
The most severe case, is the pathological case of when someone uses SCAN+DEL
or SSCAN+SREM creating an unevenly distributed dict.
This was amplified by the recent change in #11692 which prevented a
down-sizing rehashing while there is a fork.
## Solution
1. Before, we will stop sampling when we reach the maximum number
of samples, even if there is more data after the current chain.
Now when we reach the maximum we use the Reservoir Sampling
algorithm to fairly sample the end of the chain that cannot be sampled
2. Fix the rehashing code, so that the same as it allows rehashing for up-sizing
during fork when the ratio is extreme, it will allow it for down-sizing as well.
Issue was introduced (or became more severe) by #11692
Co-authored-by: Oran Agra <oran@redislabs.com>
In SPOP, when COUNT is greater than or equal to set's size,
we will remove the set. In dbDelete, we will do DEL or UNLINK
according to the lazy flag. This is also required for propagate.
In RESTORE, we won't store expired keys into the db, see #7472.
When used together with REPLACE, it should emit a DEL or UNLINK
according to the lazy flag.
This PR also adds tests to cover the propagation. The RESTORE
test will also cover #7472.
* Add command being unblocked cause another command to get unblocked execution order test
In #12301, we observed that if the
`while(listLength(server.ready_keys) != 0)`
in handleClientsBlockedOnKeys is changed to
`if(listLength(server.ready_keys) != 0)`,
the order of command execution will change.
It is wrong to change that. It means that if a command
being unblocked causes another command to get unblocked
(like a BLMOVE would do), then the new unblocked command
will wait for later to get processed rather than right away.
It'll not have any real implication if we change that since
we do call handleClientsBlockedOnKeys in beforeSleep again,
and redis will still behave correctly, but we don't change that.
An example:
1. $rd1 blmove src{t} dst{t} left right 0
2. $rd2 blmove dst{t} src{t} right left 0
3. $rd3 set key1{t}, $rd3 lpush src{t}, $rd3 set key2{t} in a pipeline
The correct order would be:
1. set key1{t}
2. lpush src{t}
3. lmove src{t} dst{t} left right
4. lmove dst{t} src{t} right left
5. set key2{t}
The wrong order would be:
1. set key1{t}
2. lpush src{t}
3. lmove src{t} dst{t} left right
4. set key2{t}
5. lmove dst{t} src{t} right left
This PR adds corresponding test to cover it.
* Add comment near while(listLength(server.ready_keys) != 0)
For the XREADGROUP BLOCK > scenario, there is an endless loop.
Due to #11012, it keep going, reprocess command -> blockForKeys -> reprocess command
The right fix is to avoid an endless loop in handleClientsBlockedOnKey and handleClientsBlockedOnKeys,
looks like there was some attempt in handleClientsBlockedOnKeys but maybe not sufficiently good,
and it looks like using a similar trick in handleClientsBlockedOnKey is complicated.
i.e. stashing the list on the stack and iterating on it after creating a fresh one for future use,
is problematic since the code keeps accessing the global list.
Co-authored-by: Oran Agra <oran@redislabs.com>
This will increase the size of an already large COB (one already passed
the threshold for disconnection)
This could also mean that we'll attempt to write that data to the socket
and the replica will manage to read it, which will result in an
undesired partial sync (undesired for the test)
In 7.2, After 971b177fa we make sure (assert) that
the duration has been recorded when resetting the client.
This is not true for rejected commands.
The use case I found is a blocking command that an ACL rule changed before
it was unblocked, and while reprocessing it, the command rejected and triggered the assert.
The PR reset the command duration inside rejectCommand / rejectCommandSds.
Co-authored-by: Oran Agra <oran@redislabs.com>
In #11963, some new tests about eventloop duration were added, which includes time measurement in TCL scripts. This has caused some unexpected CI failures, such as #12169 and #12177, due to slow test servers or some performance jittering.
