blockForKeys() was not freeing the allocation holding the ID when the
key was already found busy. Fortunately the unit test checked explicitly
for blocking multiple times for the same key (copying a regression in
the blocking lists tests), so the bug was detected by the Redis test leak
checker.
XADD was suboptimal in the first incarnation of the command, not being
able to accept an ID (very useufl for replication), nor options for
having capped streams.
The keyspace notification for streams was not implemented.
A client may lose a lot of time between invocations of blocking XREAD,
for example because it is processing the messages or for any other
cause. When it returns back, it may provide a low enough message ID that
the server will block to send an unreasonable number of messages in a
single call. For this reason we set a COUNT when the client is blocked
with XREAD calls, even if no COUNT is given. This is arbitrarily set to
1000 because it's enough to avoid slowing down the reception of many
messages, but low enough to avoid to block.
With lists we need to signal only on key creation, but streams can
provide data to clients listening at every new item added.
To make this slightly more efficient we now track different classes of
blocked clients to avoid signaling keys when there is nobody listening.
A typical case is when the stream is used as a time series DB and
accessed only by range with XRANGE.
After a few attempts it looked quite saner to just add the last item ID
at the end of the serialized listpacks, instead of scanning the last
listpack loaded from head to tail just to fetch it. It's a disk space VS
CPU-and-simplicity tradeoff basically.
Related to #4483. As suggested by @soloestoy, we can retrieve the SHA1
from the body. Given that in the new implementation using AUX fields we
ended copying around a lot to create new objects and strings, extremize
such concept and trade CPU for space inside the RDB file.
This is currently needed in order to fix#4483, but this can be
useful in other contexts, so maybe later we may want to remove the
conditionals and always save/load scripts.
Note that we are using the "lua" AUX field here, in order to guarantee
backward compatibility of the RDB file. The unknown AUX fields must be
discarded by past versions of Redis.
Doing the following ended with a broken server.executable:
1. Start Redis with src/redis-server
2. Send CONFIG SET DIR /tmp/
3. Send DEBUG RESTART
At this point we called execve with an argv[0] that is no longer related
to the new path. So after the restart the absolute path of the
executable is recomputed in the wrong way. With this fix we pass the
absolute path already computed as argv[0].
This adds a new `addReplyHelp` helper that's used by commands
when returning a help text. The following commands have been
touched: DEBUG, OBJECT, COMMAND, PUBSUB, SCRIPT and SLOWLOG.
WIP
Fix entry command table entry for OBJECT for HELP option.
After #4472 the command may have just 2 arguments.
Improve OBJECT HELP descriptions.
See #4472.
WIP 2
WIP 3
See #4192, the original PR removed lines of code that are actually
needed, so thanks to @chunqiulfq for reporting the problem, but merging
solution from @jeesyn after checking, together with @artix75, that the
logic covers all the cases.
Firstly, use access time to replace the decreas time of LFU.
For function LFUDecrAndReturn,
it should only try to get decremented counter,
not update LFU fields, we will update it in an explicit way.
And we will times halve the counter according to the times of
elapsed time than server.lfu_decay_time.
Everytime a key is accessed, we should update the LFU
including update access time, and increment the counter after
call function LFUDecrAndReturn.
If a key is overwritten, the LFU should be also updated.
Then we can use `OBJECT freq` command to get a key's frequence,
and LFUDecrAndReturn should be called in `OBJECT freq` command
in case of the key has not been accessed for a long time,
because we update the access time only when the key is read or
overwritten.
getLongLongFromObject calls string2ll which has this line:
/* Return if not all bytes were used. */
so if you pass an sds with 3 characters "1\01" it will fail.
but getLongDoubleFromObject calls strtold, and considers it ok if eptr[0]==`\0`
i.e. if the end of the string found by strtold ends with null terminator
127.0.0.1:6379> set a 1
OK
127.0.0.1:6379> setrange a 2 2
(integer) 3
127.0.0.1:6379> get a
"1\x002"
127.0.0.1:6379> incrbyfloat a 2
"3"
127.0.0.1:6379> get a
"3"
For example:
1. A module command called within a MULTI section.
2. A Lua script with replicate_commands() called within a MULTI section.
3. A module command called from a Lua script in the above context.
Normally in modern Redis you can't create zero-len lists, however it's
possible to load them from old RDB files generated, for instance, using
Redis 2.8 (see issue #4409). The "Right Thing" would be not loading such
lists at all, but this requires to hook in rdb.c random places in a not
great way, for a problem that is at this point, at best, minor.
Here in this commit instead I just fix the fact that zero length lists,
materialized as quicklists with the first node set to NULL, were
iterated in the wrong way while they are saved, leading to a crash.
The other parts of the list implementation are apparently able to deal
with empty lists correctly, even if they are no longer a thing.
Since SDS v2, we no longer have a single header, so the function to
rewrite the SDS in terms of the minimum space required, instead of just
using realloc() and let the underlying allocator decide what to do,
was doing an allocation + copy every time the minimum possible header
needed to represent the string was different than the current one.
This could be often a bit wasteful, because if we go, for instance, from
the 32 bit fields header to the 16 bit fields header, the overhead of
the header is normally very small. With this commit we call realloc
instead, unless the change in header size is very significant in relation
to the string length.
When we free the backlog, we should use a new
replication ID and clear the ID2. Since without
backlog we can not increment master_repl_offset
even do write commands, that may lead to inconsistency
when we try to connect a "slave-before" master
(if this master is our slave before, our replid
equals the master's replid2). As the master have our
history, so we can match the master's replid2 and
second_replid_offset, that make partial sync work,
but the data is inconsistent.
There was not enough sanity checking in the code loading the slots of
Redis Cluster from the nodes.conf file, this resulted into the
attacker's ability to write data at random addresses in the process
memory, by manipulating the index of the array. The bug seems
exploitable using the following techique: the config file may be altered so
that one of the nodes gets, as node ID (which is the first field inside the
structure) some data that is actually executable: then by writing this
address in selected places, this node ID part can be executed after a
jump. So it is mostly just a matter of effort in order to exploit the
bug. In practice however the issue is not very critical because the
bug requires an unprivileged user to be able to modify the Redis cluster
nodes configuration, and at the same time this should result in some
gain. However Redis normally is unprivileged as well. Yet much better to
have this fixed indeed.
Fix#4278.
Certain checks were useless, at the same time certain malformed inputs
were accepted without problems (emtpy strings parsed as zero).
Cases where strtod() returns ERANGE but we still want to parse the input
where ok in getDoubleFromObject() but not in the long variant.
As a side effect of these fixes, this commit fixes#4391.
This commit is a reinforcement of commit c1c99e9.
1. Replication information can be stored when the RDB file is
generated by a mater using server.slaveseldb when server.repl_backlog
is not NULL, or set repl_stream_db be -1. That's safe, because
NULL server.repl_backlog will trigger full synchronization,
then master will send SELECT command to replicaiton stream.
2. Only do rdbSave* when rsiptr is not NULL,
if we do rdbSave* without rdbSaveInfo, slave will miss repl-stream-db.
3. Save the replication informations also in the case of
SAVE command, FLUSHALL command and DEBUG reload.
This commit attempts to fix a number of bugs reported in #4316.
They are related to the way replication info like replication ID,
offsets, and currently selected DB in the master client, are stored
and loaded by Redis. In order to avoid inconsistencies the changes in
this commit try to enforce that:
1. Replication information are only stored when the RDB file is
generated by a slave that has a valid 'master' client, so that we can
always extract the currently selected DB.
2. When replication informations are persisted in the RDB file, all the
info for a successful PSYNC or nothing is persisted.
3. The RDB replication informations are only loaded if the instance is
configured as a slave, otherwise a master can start with IDs that relate
to a different history of the data set, and stil retain such IDs in the
future while receiving unrelated writes.
A slave may be started with an RDB file able to provide enough slave to
perform a successful partial SYNC with its master. However in such a
case, how outlined in issue #4268, the slave backlog will not be
started, since it was only initialized on full syncs attempts. This
creates different problems with successive PSYNC attempts that will
always result in full synchronizations.
Thanks to @fdingiit for discovering the issue.
when SHUTDOWN command is recived it is possible that some of the recent
command were not yet flushed from the AOF buffer, and the server
experiences data loss at shutdown.
Lua scripting does not support calling blocking commands, however all
the native Redis commands are flagged as "s" (no scripting flag), so
this is not possible at all. With modules there is no such mechanism in
order to flag a command as non callable by the Lua scripting engine,
moreover we cannot trust the modules users from complying all the times:
it is likely that modules will be released to have blocking commands
without such commands being flagged correctly, even if we provide a way to
signal this fact.
This commit attempts to address the problem in a short term way, by
detecting that a module is trying to block in the context of the Lua
scripting engine client, and preventing to do this. The module will
actually believe to block as usually, but what happens is that the Lua
script receives an error immediately, and the background call is ignored
by the Redis engine (if not for the cleanup callbacks, once it
unblocks).
Long term, the more likely solution, is to introduce a new call called
RedisModule_GetClientFlags(), so that a command can detect if the caller
is a Lua script, and return an error, or avoid blocking at all.
Being the blocking API experimental right now, more work is needed in
this regard in order to reach a level well blocking module commands and
all the other Redis subsystems interact peacefully.
Now the effect is like the following:
127.0.0.1:6379> eval "redis.call('hello.block',1,5000)" 0
(error) ERR Error running script (call to
f_b5ba35ff97bc1ef23debc4d6e9fd802da187ed53): @user_script:1: ERR
Blocking module command called from Lua script
This commit fixes issue #4127 in the short term.
This function failed when an internal-only flag was set as an only flag
in a node: the string was trimmed expecting a final comma before
exiting the function, causing a crash. See issue #4142.
Moreover generation of flags representation only needed at DEBUG log
level was always performed: a waste of CPU time. This is fixed as well
by this commit.
The function cache was not working at all, and the function returned
wrong values if there where two or more modules exporting native data
types.
See issue #4131 for more details.
In Redis 4.0 replication, with the introduction of PSYNC2, masters and
slaves replicate commands to cascading slaves and to the replication
backlog itself in a different way compared to the past.
Masters actually replicate the effects of client commands.
Slaves just propagate what they receive from masters.
This mechanism can cause problems when the configuration of an instance
is changed from master to slave inside a transaction. For instance
we could send to a master instance the following sequence:
MULTI
SLAVEOF 127.0.0.1 0
EXEC
SLAVEOF NO ONE
Before the fixes in this commit, the MULTI command used to be propagated
into the replication backlog, however after the SLAVEOF command the
instance is a slave, so the EXEC implementation failed to also propagate
the EXEC command. When the slaves of the above instance reconnected,
they were incrementally synchronized just sending a "MULTI". This put
the master client (in the slaves) into MULTI state, breaking the
replication.
Notably even Redis Sentinel uses the above approach in order to guarantee
that configuration changes are always performed together with rewrites
of the configuration and with clients disconnection. Sentiel does:
MULTI
SLAVEOF ...
CONFIG REWRITE
CLIENT KILL TYPE normal
EXEC
So this was a really problematic issue. However even with the fix in
this commit, that will add the final EXEC to the replication stream in
case the instance was switched from master to slave during the
transaction, the result would be to increment the slave replication
offset, so a successive reconnection with the new master, will not
permit a successful partial resynchronization: no way the new master can
provide us with the backlog needed, we incremented our offset to a value
that the new master cannot have.
However the EXEC implementation waits to emit the MULTI, so that if the
commands inside the transaction actually do not need to be replicated,
no commands propagation happens at all. From multi.c:
if (!must_propagate && !(c->cmd->flags & (CMD_READONLY|CMD_ADMIN))) {
execCommandPropagateMulti(c);
must_propagate = 1;
}
The above code is already modified by this commit you are reading.
Now also ADMIN commands do not trigger the emission of MULTI. It is actually
not clear why we do not just check for CMD_WRITE... Probably I wrote it this
way in order to make the code more reliable: better to over-emit MULTI
than not emitting it in time.
So this commit should indeed fix issue #3836 (verified), however it looks
like some reconsideration of this code path is needed in the long term.
BONUS POINT: The reverse bug.
Even in a read only slave "B", in a replication setup like:
A -> B -> C
There are commands without the READONLY nor the ADMIN flag, that are also
not flagged as WRITE commands. An example is just the PING command.
So if we send B the following sequence:
MULTI
PING
SLAVEOF NO ONE
EXEC
The result will be the reverse bug, where only EXEC is emitted, but not the
previous MULTI. However this apparently does not create problems in practice
but it is yet another acknowledge of the fact some work is needed here
in order to make this code path less surprising.
Note that there are many different approaches we could follow. For instance
MULTI/EXEC blocks containing administrative commands may be allowed ONLY
if all the commands are administrative ones, otherwise they could be
denined. When allowed, the commands could simply never be replicated at all.
In general we do not want before/after sleep() callbacks to be called
when we re-enter the event loop, since those calls are only designed in
order to perform operations every main iteration of the event loop, and
re-entering is often just a way to incrementally serve clietns with
error messages or other auxiliary operations. However, if we call the
callbacks, we are then forced to think at before/after sleep callbacks
as re-entrant, which is much harder without any good need.
However here there was also a clear bug: beforeSleep() was actually
never called when re-entering the event loop. But the new afterSleep()
callback was. This is broken and in this instance re-entering
afterSleep() caused a modules GIL dead lock.
