Fix some outdated comments and add comment for moduleNotifyKeyspaceEvent
we added in #11084 since it seems a bit implicit.
---------
Co-authored-by: Oran Agra <oran@redislabs.com>
Test failure on freebsd CI:
```
*** [err]: expire scan should skip dictionaries with lot's of empty buckets in tests/unit/expire.tcl
scan didn't handle slot skipping logic.
```
Observation:
expiry of keys might happen before the empty buckets are formed and won't help with the expiry skip logic validation.
Solution:
Disable expiration until the empty buckets are formed.
Fixing issues started after #11695 when the defrag tests are being executed in cluster mode too.
For some reason, it looks like the defragmentation is over too quickly, before the test is able to
detect that it's running.
so now instead of waiting to see that it's active, we wait to see that it did some work
```
[err]: Active defrag big list: cluster in tests/unit/memefficiency.tcl
defrag not started.
[err]: Active defrag big keys: cluster in tests/unit/memefficiency.tcl
defrag didn't stop.
```
Temporarily disabling few of the defrag tests in cluster mode to make the daily run stable:
Active defrag eval scripts
Active defrag big keys
Active defrag big list
Active defrag edge case
Dictionary iterator logic in the `tryResizeHashTables` method is picking the next
(incorrect) dictionary while the cursor is at a given slot. This could lead to some
dictionary/slot getting skipped from resizing.
Also stabilize the test.
problem introduced recently in #11695
Before this commit, Unix socket setup performed chmod(2) on the socket
file after calling listen(2). Depending on what umask is used, this
could leave the file with the wrong permissions for a short period of
time. As a result, another process could exploit this race condition and
establish a connection that would otherwise not be possible.
We now make sure the socket permissions are set up prior to calling
listen(2).
(cherry picked from commit 1119ecae6fd8796fa337df2212f09173ab6c7b0a)
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
Using heap allocation during signal handlers is unsafe.
This PR purpose is to replace all the heap allocations done within the signal
handlers raised upon server crash and assertions.
These were added in #12453.
writeStacktraces(): allocates the stacktraces output array on the calling thread's
stack and assigns the address to a global variable.
It calls `ThreadsManager_runOnThreads()` that invokes `collect_stacktrace_data()`
by each thread: each thread writes to a different location in the above array to allow
sync writes.
get_ready_to_signal_threads_tids(): instead of allocating the `tids` array, it receives it
as a fixed size array parameter, allocated on on the stack of the calling function, and
returns the number of valid threads. The array size is hard-coded to 50.
`ThreadsManager_runOnThreads():` To avoid the outputs array allocation, the
**callback signature** was changed. Now it should return void. This function return type
has also changed to int - returns 1 if successful, and 0 otherwise.
Other unsafe calls will be handled in following PRs
This is an implementation of https://github.com/redis/redis/issues/10589 that eliminates 16 bytes per entry in cluster mode, that are currently used to create a linked list between entries in the same slot. Main idea is splitting main dictionary into 16k smaller dictionaries (one per slot), so we can perform all slot specific operations, such as iteration, without any additional info in the `dictEntry`. For Redis cluster, the expectation is that there will be a larger number of keys, so the fixed overhead of 16k dictionaries will be The expire dictionary is also split up so that each slot is logically decoupled, so that in subsequent revisions we will be able to atomically flush a slot of data.
## Important changes
* Incremental rehashing - one big change here is that it's not one, but rather up to 16k dictionaries that can be rehashing at the same time, in order to keep track of them, we introduce a separate queue for dictionaries that are rehashing. Also instead of rehashing a single dictionary, cron job will now try to rehash as many as it can in 1ms.
* getRandomKey - now needs to not only select a random key, from the random bucket, but also needs to select a random dictionary. Fairness is a major concern here, as it's possible that keys can be unevenly distributed across the slots. In order to address this search we introduced binary index tree). With that data structure we are able to efficiently find a random slot using binary search in O(log^2(slot count)) time.
* Iteration efficiency - when iterating dictionary with a lot of empty slots, we want to skip them efficiently. We can do this using same binary index that is used for random key selection, this index allows us to find a slot for a specific key index. For example if there are 10 keys in the slot 0, then we can quickly find a slot that contains 11th key using binary search on top of the binary index tree.
* scan API - in order to perform a scan across the entire DB, the cursor now needs to not only save position within the dictionary but also the slot id. In this change we append slot id into LSB of the cursor so it can be passed around between client and the server. This has interesting side effect, now you'll be able to start scanning specific slot by simply providing slot id as a cursor value. The plan is to not document this as defined behavior, however. It's also worth nothing the SCAN API is now technically incompatible with previous versions, although practically we don't believe it's an issue.
* Checksum calculation optimizations - During command execution, we know that all of the keys are from the same slot (outside of a few notable exceptions such as cross slot scripts and modules). We don't want to compute the checksum multiple multiple times, hence we are relying on cached slot id in the client during the command executions. All operations that access random keys, either should pass in the known slot or recompute the slot.
* Slot info in RDB - in order to resize individual dictionaries correctly, while loading RDB, it's not enough to know total number of keys (of course we could approximate number of keys per slot, but it won't be precise). To address this issue, we've added additional metadata into RDB that contains number of keys in each slot, which can be used as a hint during loading.
* DB size - besides `DBSIZE` API, we need to know size of the DB in many places want, in order to avoid scanning all dictionaries and summing up their sizes in a loop, we've introduced a new field into `redisDb` that keeps track of `key_count`. This way we can keep DBSIZE operation O(1). This is also kept for O(1) expires computation as well.
## Performance
This change improves SET performance in cluster mode by ~5%, most of the gains come from us not having to maintain linked lists for keys in slot, non-cluster mode has same performance. For workloads that rely on evictions, the performance is similar because of the extra overhead for finding keys to evict.
RDB loading performance is slightly reduced, as the slot of each key needs to be computed during the load.
## Interface changes
* Removed `overhead.hashtable.slot-to-keys` to `MEMORY STATS`
* Scan API will now require 64 bits to store the cursor, even on 32 bit systems, as the slot information will be stored.
* New RDB version to support the new op code for SLOT information.
---------
Co-authored-by: Vitaly Arbuzov <arvit@amazon.com>
Co-authored-by: Harkrishn Patro <harkrisp@amazon.com>
Co-authored-by: Roshan Khatri <rvkhatri@amazon.com>
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
when a server in the test suite crashes and is restarted by redstart_server, we didn't clean it's pid from the list.
we can see that when the corrupt-dump-fuzzer hangs, it has a long list of servers to lean, but in fact they're all already dead.
In #11568 we removed the NOSCRIPT flag from commands and keep the BLOCKING flag.
Aiming to allow them in scripts and let them implicitly behave in the non-blocking way.
In that sense, the old behavior was to allow LPOP and reject BLPOP, and the new behavior,
is to allow BLPOP too, and fail it only in case it ends up blocking.
So likewise, so far we allowed XREAD and rejected XREAD BLOCK, and we will now allow
that too, and only reject it if it ends up blocking.
In #10536, we introduced the assert, some older versions of servers
(like 7.0) doesn't gossip shard_id, so we will not add the node to
cluster->shards, and node->shard_id is filled in randomly and may not
be found here.
It causes that if we add a 7.2 node to a 7.0 cluster and allocate slots
to the 7.2 node, the 7.2 node will crash when it hits this assert. Somehow
like #12538.
In this PR, we remove the assert and replace it with an unconditional removal.
When entering pubsub mode and using the redis-cli only
connect command, we need to reset pubsub_mode because
we switch to a different connection.
This will affect the prompt when the connection is successful,
and redis-cli will crash when the connect fails:
```
127.0.0.1:6379> subscribe ch
1) "subscribe"
2) "ch"
3) (integer) 1
127.0.0.1:6379(subscribed mode)> connect 127.0.0.1 6380
127.0.0.1:6380(subscribed mode)> ping
PONG
127.0.0.1:6380(subscribed mode)> connect a b
Could not connect to Redis at a:0: Name or service not known
Segmentation fault
```
recently there are some incidents of hanged tests in the CI
when we try to reproduce them, we get an assertion, not a hang.
maybe the server logs will reveal some info.
Use the __MAC_OS_X_VERSION_MIN_REQUIRED macro to detect the
macOS system version instead of using MAC_OS_X_VERSION_10_6.
From MacOSX14.0.sdk, the default definitions of MAC_OS_X_VERSION_xxx have
been removed in usr/include/AvailabilityMacros.h. It includes AvailabilityVersions.h,
where the following condition must be met:
`#if (!defined(_POSIX_C_SOURCE) && !defined(_XOPEN_SOURCE)) || defined(_DARWIN_C_SOURCE)`
Only then will MAC_OS_X_VERSION_xxx be defined.
However, in the project, _DARWIN_C_SOURCE is not defined, which leads to the
loss of the definition for MAC_OS_X_VERSION_10_6.
Recently we added a way for the module to declare that it wishes to
receive nested KSN, by setting ALLOW_NESTED_KEYSPACE_NOTIFICATIONS.
but it looks like this flow has a bug, clearing the `active` member
when it was previously set. however, since nesting is permitted,
this bug has no implications, since regardless of the active member,
the notification is permitted.
We use the C standard assert() in various places in the codebase, which requires NDEBUG to be undefined. We introduced the redisassert.h file in order to allow low level files to access the assert that maps to serverPanic, but this was only applied tactically and is not available broadly.
This PR removes all usage of the standard library asserts and replaces them with an assert that maps to serverPanic. It makes us immune to accidentally setting the NDEBUG flag preventing assertions. I also marked marked the server asserts as "likely" to not execute. I spot checked various points in the code, and it didn't change the code layout on my x86 mac, but it is more consistent with redisassert.h and seems more correct overall.
Fixed some usages of tabs which caused weird indentation in the code. Tried to find all of the places so their was one PR. I ignored all of the usages of tabs which don't really affect readability.
## Crash fix
### Current behavior
We might crash if we fail to collect some of the threads' output. If it exceeds timeout for example.
The threads mngr API guarantees that the output array length will be `tids_len`, however, some
indices can be NULL, in case it fails to collect some of the threads' outputs.
When we use the threads mngr to collect the threads' stacktraces, we rely on this and skip NULL
entries. Since the output array was allocated with malloc, instead of NULL, it contained garbage,
so we got a segmentation fault when trying to read this garbage. (in debug.c:writeStacktraces() )
### fix
Allocate the global output array with zcalloc.
### To reproduce the bug, you'll have to change the code:
**in threadsmngr:ThreadsManager_runOnThreads():**
make sure the g_output_array allocation is initialized with garbage and not 0s
(add `memset(g_output_array, 2, sizeof(void*) * tids_len);` below the allocation).
Force one of the threads to write to the array:
add a global var: `static redisAtomic size_t return_now = 0;`
add to `invoke_callback()` before writing to the output array:
```
size_t i_return;
atomicGetIncr(return_now, i_return, 1);
if(i_return == 1) return;
```
compile, start the server with `--enable-debug-command local` and run `redis-cli debug assert`
The assertion triggers the the stacktrace collection.
Expect to get 2 prints of the stack trace - since we get the segmentation fault after we return from
the threads mngr, it can be safely triggered again.
## Added global variables r/w lock in ThreadsManager
To avoid a situation where the main thread runs `ThreadsManager_cleanups` while threads are still
invoking the signal handler, we use a r/w lock.
For cleanups, we will acquire the write lock.
The threads will acquire the read lock to enable them to write simultaneously.
If we fail to acquire the read lock, it means cleanups are in progress and we return immediately.
After acquiring the lock we can safely check that the global output array wasn't nullified and proceed
to write to it.
This way we ensure the threads are not modifying the global variables/ trying to write to the output
array after they were zeroed/nullified/destroyed(the semaphore).
## other minor logging change
1. removed logging if the semaphore times out because the threads can still write to the output array
after this check. Instead, we print the total number of printed stacktraces compared to the exacted
number (len_tids).
2. use noinline attribute to make sure the uplevel number of ignored stack trace entries stays correct.
3. improve testing
Co-authored-by: Oran Agra <oran@redislabs.com>
In some tests, the code manually searches for a log message, and it
uses tail -1 with a delay of 1 second, which can miss the expected line.
Also, because the aof tests use start_server_aof and not start_server,
the test name doesn't log into the server log.
To fix the above, I made the following changes:
- Change the start_server_aof to wrap the start_server.
This will add the created aof server to the servers list, and make
srv() and wait_for_log_messages() available for the tests.
- Introduce a new option for start_server.
'wait_ready' - an option to let the caller start the test code without
waiting for the server to be ready. useful for tests on a server that
is expected to exit on startup.
- Create a new start_server_aof_ex.
The new proc also accept options as argument and make use of the
new 'short_life' option for tests that are expected to exit on startup
because of some error in the aof file(s).
Because of the above, I had to change many lines and replace every
local srv variable (a server config) usage with the srv().
The problem is that WAITAOF could have hang in case commands were
propagated only to replicas.
This can happen if a module uses RM_Call with the REDISMODULE_ARGV_NO_AOF flag.
In that case, master_repl_offset would increase, but there would be nothing to fsync, so
in the absence of other traffic, fsynced_reploff_pending would stay the static, and WAITAOF can hang.
This commit updates fsynced_reploff_pending to the latest offset in flushAppendOnlyFile in case
there's nothing to fsync. i.e. in case it's behind because of the above mentions case it'll be refreshed
and release the WAITAOF.
Other changes:
Fix a race in wait.tcl (client getting blocked vs. the fsync thread)
If we set `fsynced_reploff_pending` in `startAppendOnly`, and the fork doesn't start
immediately (e.g. there's another fork active at the time), any subsequent commands
will increment `server.master_repl_offset`, but will not cause a fsync (given they were
executed before the fork started, they just ended up in the RDB part of it)
Therefore, any WAITAOF will wait on the new master_repl_offset, but it will time out
because no fsync will be executed.
Release notes:
```
WAITAOF could timeout in the absence of write traffic in case a new AOF is created and
an AOFRW can't immediately start.
This can happen by the appendonly config is changed at runtime, but also after FLUSHALL,
and replica full sync.
```
In a long printf call with many placeholders, it's hard to see which argument
belongs to which placeholder.
The long printf-like calls in the INFO and CLIENT commands are rewritten into
pairs of (format, argument). These pairs are then rewritten to a single call with
a long format string and a long list of arguments, using a macro called FMTARGS.
The file `fmtargs.h` is added to the repo.
Co-authored-by: Madelyn Olson <34459052+madolson@users.noreply.github.com>
The `retval` variable is defined as an `int`, so with 4 bytes, it cannot properly represent
microsecond values greater than the equivalent of about 35 minutes.
This bug shouldn't impact standard Redis behavior because Redis doesn't have timer
events that are scheduled as far as 35 minutes out, but it may affect custom Redis modules
which interact with the event timers via the RM_CreateTimer API.
The impact is that `usUntilEarliestTimer` may return 0 for as long as `retval` is scaled to
an overflowing value. While `usUntilEarliestTimer` continues to return `0`, `aeApiPoll`
will have a zero timeout, and so Redis will use significantly more CPU iterating through
its event loop without pause. For timers scheduled far enough into the future, Redis will
cycle between ~35 minute periods of high CPU usage and ~35 minute periods of standard
CPU usage.
In this PR we are adding the functionality to collect all the process's threads' backtraces.
## Changes made in this PR
### **introduce threads mngr API**
The **threads mngr API** which has 2 abilities:
* `ThreadsManager_init() `- register to SIGUSR2. called on the server start-up.
* ` ThreadsManager_runOnThreads()` - receives a list of a pid_t and a callback, tells every
thread in the list to invoke the callback, and returns the output collected by each invocation.
**Elaborating atomicvar API**
* `atomicIncrGet(var,newvalue_var,count) `-- Increment and get the atomic counter new value
* `atomicFlagGetSet` -- Get and set the atomic counter value to 1
### **Always set SIGALRM handler**
SIGALRM handler prints the process's stacktrace to the log file. Up until now, it was set only if the
`server.watchdog_period` > 0. This can be also useful if debugging is needed. However, in situations
where the server can't get requests, (a deadlock, for example) we weren't able to change the signal handler.
To make it available at run time we set SIGALRM handler on server startup. The signal handler name was
changed to a more general `sigalrmSignalHandler`.
### **Print all the process' threads' stacktraces**
`logStackTrace()` now calls `writeStacktraces()`, instead of logging the current thread stacktrace.
`writeStacktraces()`:
* On Linux systems we use the threads manager API to collect the backtraces of all the process' threads.
To get the `tids` list (threads ids) we read the `/proc/<redis-server-pid>/tasks` file which includes a list of directories.
Each directory name corresponds to one tid (including the main thread). For each thread, we also need to check if it
can get the signal from the threads manager (meaning it is not blocking/ignoring that signal). We send the threads
manager this tids list and `collect_stacktrace_data()` callback, which collects the thread's backtrace addresses,
its name, and tid.
* On other systems, the behavior remained as it was (writing only the current thread stacktrace to the log file).
## compatibility notes
1. **The threads mngr API is only supported in linux.**
2. glibc earlier than 2.3 We use `syscall(SYS_gettid)` and `syscall(SYS_tgkill...)` because their dedicated
alternatives (`gettid()` and `tgkill`) were added in glibc 2.3.
## Output example
Each thread backtrace will have the following format:
`<tid> <thread_name> [additional_info]`
* **tid**: as read from the `/proc/<redis-server-pid>/tasks` file
* **thread_name**: the tread name as it is registered in the os/
* **additional_info**: Sometimes we want to add specific information about one of the threads. currently.
it is only used to mark the thread that handles the backtraces collection by adding "*".
In case of crash - this also indicates which thread caused the crash. The handling thread in won't
necessarily appear first.
```
------ STACK TRACE ------
EIP:
/lib/aarch64-linux-gnu/libc.so.6(epoll_pwait+0x9c)[0xffffb9295ebc]
67089 redis-server *
linux-vdso.so.1(__kernel_rt_sigreturn+0x0)[0xffffb9437790]
/lib/aarch64-linux-gnu/libc.so.6(epoll_pwait+0x9c)[0xffffb9295ebc]
redis-server *:6379(+0x75e0c)[0xaaaac2fe5e0c]
redis-server *:6379(aeProcessEvents+0x18c)[0xaaaac2fe6c00]
redis-server *:6379(aeMain+0x24)[0xaaaac2fe7038]
redis-server *:6379(main+0xe0c)[0xaaaac3001afc]
/lib/aarch64-linux-gnu/libc.so.6(+0x273fc)[0xffffb91d73fc]
/lib/aarch64-linux-gnu/libc.so.6(__libc_start_main+0x98)[0xffffb91d74cc]
redis-server *:6379(_start+0x30)[0xaaaac2fe0370]
67093 bio_lazy_free
/lib/aarch64-linux-gnu/libc.so.6(+0x79dfc)[0xffffb9229dfc]
/lib/aarch64-linux-gnu/libc.so.6(pthread_cond_wait+0x208)[0xffffb922c8fc]
redis-server *:6379(bioProcessBackgroundJobs+0x174)[0xaaaac30976e8]
/lib/aarch64-linux-gnu/libc.so.6(+0x7d5c8)[0xffffb922d5c8]
/lib/aarch64-linux-gnu/libc.so.6(+0xe5d1c)[0xffffb9295d1c]
67091 bio_close_file
/lib/aarch64-linux-gnu/libc.so.6(+0x79dfc)[0xffffb9229dfc]
/lib/aarch64-linux-gnu/libc.so.6(pthread_cond_wait+0x208)[0xffffb922c8fc]
redis-server *:6379(bioProcessBackgroundJobs+0x174)[0xaaaac30976e8]
/lib/aarch64-linux-gnu/libc.so.6(+0x7d5c8)[0xffffb922d5c8]
/lib/aarch64-linux-gnu/libc.so.6(+0xe5d1c)[0xffffb9295d1c]
67092 bio_aof
/lib/aarch64-linux-gnu/libc.so.6(+0x79dfc)[0xffffb9229dfc]
/lib/aarch64-linux-gnu/libc.so.6(pthread_cond_wait+0x208)[0xffffb922c8fc]
redis-server *:6379(bioProcessBackgroundJobs+0x174)[0xaaaac30976e8]
/lib/aarch64-linux-gnu/libc.so.6(+0x7d5c8)[0xffffb922d5c8]
/lib/aarch64-linux-gnu/libc.so.6(+0xe5d1c)[0xffffb9295d1c]
67089:signal-handler (1693824528) --------
```
Starting a change in #12233 (released in 7.2), CLUSTER commands use client's
connection to decide whether to return TLS port or non-TLS port, but commands
called by Lua script and module's RM_Call don't have a real client with connection,
and would currently be regarded as non-TLS connections.
We can use server.current_client instead when it is available. When it is not (module calls
commands without a real client), we may see this as an undefined behavior, and return null
or default port (currently in this PR it returns default port, judged by server.tls_cluster).
An unintentional change was introduced in #10536, we used
to use addReplyLongLong and now it is addReplyBulkLonglong,
revert it back the previous behavior.
Updated the command tips for ACL SAVE / SETUSER / DELUSER, CLIENT SETNAME / SETINFO, and LATENCY RESET.
The tips now match CONFIG SET, since there's a similar behavior for all of these commands - the
user expects to update the various configurations & states on all nodes, not only on a single, random node.
For LATENCY RESET the response tip is now agg_sum.
Co-authored-by: Shachar Langbeheim <shachlan@amazon.com>
When connecting between a 7.0 and 7.2 cluster, the 7.0 cluster will not populate the shard_id field, which is expect on the 7.2 cluster. This is not intended behavior, as the 7.2 cluster is supposed to use a temporary shard_id while the node is in the upgrading state, but it wasn't being correctly set in this case.
Recently, the option of sending an argument from stdin using `-x` flag
was added to redis-benchmark (this option is available in redis-cli as well).
However, using the `-x` option for sending a blobs that contains null-characters
doesn't work as expected - the argument is trimmed in the first occurrence of
`\X00` (unlike in redis-cli).
This PR aims to fix this issue and add the support for every binary string input,
by sending arguments length to `redisFormatCommandArgv` when processing
redis-benchmark command, so we won't treat the arguments as C-strings.
Additionally, we add a simple test coverage for `-x` (without binary strings, and
also remove an excessive server started in tests, and make sure to select db 0
so that `r` and the benchmark work on the same db.
Co-authored-by: Oran Agra <oran@redislabs.com>
The new test added in #12476 causes reply-schemas-validator to fail.
When doing `catch {r get key}`, the req-res output is:
```
3
get
3
key
12
__argv_end__
$100000
aaaaaaaaaaaaaaaaaaaa...4
info
5
stats
12
__argv_end__
=1670
txt:# Stats
...
```
And we can see the link after `$100000`, there is a 4 in the last,
it break the req-res-log-validator script since the format is wrong.
The reason i guess is after the client reconnection (after the output
buf limit), we will not add newlines, but append args directly.
Since obuf-limits.tcl is doing the same thing, and it had the logreqres:skip
flag, so this PR is following it.
Found that in moduleConfigValidityCheck and isModuleConfigNameRegistered, sds is not required. This also allowed to remove unnecessary memcopy from some of the config registering APIs.
ZRANGE BYSCORE/BYLEX with [LIMIT offset count] option was
using every level in skiplist to jump to the first/last node in range,
but only use level[0] in skiplist to locate the node at offset, resulting
in sub-optimal performance using LIMIT:
```
while (ln && offset--) {
if (reverse) {
ln = ln->backward;
} else {
ln = ln->level[0].forward;
}
}
```
It could be slow when offset is very big. We can get the total rank of
the offset location and use skiplist to jump to it. It is an improvement
from O(offset) to O(log rank).
Below shows how this is implemented (if the offset is positve):
Use the skiplist to seach for the first element in the range, record its
rank `rank_0`, so we can have the rank of the target node `rank_t`.
Meanwhile we record the last node we visited which has zsl->level-1
levels and its rank `rank_1`. Then we start from the zsl->level-1 node,
use skiplist to go forward `rank_t-rank_1` nodes to reach the target node.
It is very similiar when the offset is reversed.
Note that if `rank_t` is very close to `rank_0`, we just start from the first
element in range and go node by node, this for the case when zsl->level-1
node is to far away and it is quicker to reach the target node by node.
Here is a test using a random generated zset including 10000 elements
(with different positive scores), doing a bench mark which compares how
fast the `ZRANGE` command is exucuted before and after the optimization.
The start score is set to 0 and the count is set to 1 to make sure that
most of the time is spent on locating the offset.
```
memtier_benchmark -h 127.0.0.1 -p 6379 --command="zrange test 0 +inf byscore limit <offset> 1"
```
| offset | QPS(unstable) | QPS(optimized) |
|--------|--------|--------|
| 10 | 73386.02 | 74819.82 |
| 1000 | 48084.96 | 73177.73 |
| 2000 | 31156.79 | 72805.83 |
| 5000 | 10954.83 | 71218.21 |
With the result above, we can see that the original code is greatly
slowed down when offset gets bigger, and with the optimization the
speed is almost not affected.
Similiar results are generated when testing reversed offset:
```
memtier_benchmark -h 127.0.0.1 -p 6379 --command="zrange test +inf 0 byscore rev limit <offset> 1"
```
| offset | QPS(unstable) | QPS(optimized) |
|--------|--------|--------|
| 10 | 74505.14 | 71653.67 |
| 1000 | 46829.25 | 72842.75 |
| 2000 | 28985.48 | 73669.01 |
| 5000 | 11066.22 | 73963.45 |
And the same conclusion is drawn from the tests of ZRANGE BYLEX.
This PR adds a new Module API int RM_AddACLCategory(RedisModuleCtx *ctx, const char *category_name) to add a new ACL command category.
Here, we initialize the ACLCommandCategories array by allocating space for 64 categories and duplicate the 21 default categories from the predefined array 'ACLDefaultCommandCategories' into the ACLCommandCategories array while ACL initialization. Valid ACL category names can only contain alphanumeric characters, underscores, and dashes.
The API when called, checks for the onload flag, category name validity, and for duplicate category name if present. If the conditions are satisfied, the API adds the new category to the trailing end of the ACLCommandCategories array and assigns the acl_categories flag bit according to the index at which the category is added.
If any error is encountered the errno is set accordingly by the API.
---------
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Add these INFO metrics:
* client_query_buffer_limit_disconnections
* client_output_buffer_limit_disconnections
Sometimes it is useful to monitor whether clients reaches size limit of
query buffer and output buffer, to decide whether we need to adjust the
buffer size limit or reduce client query payload.
Since the three commands have similar behavior (change config, return
OK), the tips that govern how they should behave should be similar.
Co-authored-by: Shachar Langbeheim <shachlan@amazon.com>
This test failed several times:
```
*** [err]: LATENCY GRAPH can output the event graph in tests/unit/latency-monitor.tcl
Expected '478' to be more than or equal to '500' (context: type eval
line 8 cmd {assert_morethan_equal $high 500} proc ::test)
```
Not sure why, adding some verbose printing that'll print the command
result on the next time.
warning against editing the config file and restarting the server.
which will attempt to load an AOF file and disregard the RDB.
Co-authored-by: Oran Agra <oran@redislabs.com>
BITCOUNT and BITPOS with non-existing key will return 0 even the
arguments are error, before this commit:
```
> flushall
OK
> bitcount s 0
(integer) 0
> bitpos s 0 0 1 hello
(integer) 0
> set s 1
OK
> bitcount s 0
(error) ERR syntax error
> bitpos s 0 0 1 hello
(error) ERR syntax error
```
The reason is that we judged non-existing before parameter checking and
returned. This PR fixes it, and after this commit:
```
> flushall
OK
> bitcount s 0
(error) ERR syntax error
> bitpos s 0 0 1 hello
(error) ERR syntax error
```
Also BITPOS made the same fix as #12394, check for wrong argument, before
checking for key.
```
> lpush mylist a b c
(integer) 3
> bitpos mylist 1 a b
(error) WRONGTYPE Operation against a key holding the wrong kind of value
```
Generally, In any command we first check for the argument and then check if key exist.
Some of the examples are
```
127.0.0.1:6379> getrange no-key invalid1 invalid2
(error) ERR value is not an integer or out of range
127.0.0.1:6379> setbit no-key 1 invalid
(error) ERR bit is not an integer or out of range
127.0.0.1:6379> xrange no-key invalid1 invalid2
(error) ERR Invalid stream ID specified as stream command argument
```
**Before change**
```
bitcount no-key invalid1 invalid2
0
```
**After change**
```
bitcount no-key invalid1 invalid2
(error) ERR value is not an integer or out of range
```
