This pr is following #9779 .
## Describe of feature
Now when we turn on the `list-compress-depth` configuration, the list will compress
the ziplist between `[list-compress-depth, -list-compress-depth]`.
When we need to use the compressed data, we will first decompress it, then use it,
and finally compress it again.
It's controlled by `quicklistNode->recompress`, which is designed to avoid the need to
re-traverse the entire quicklist for compression after each decompression, we only need
to recompress the quicklsitNode being used.
In order to ensure the correctness of recompressing, we should normally let
quicklistDecompressNodeForUse and quicklistCompress appear in pairs, otherwise,
it may lead to the head and tail being compressed or the middle ziplist not being
compressed correctly, which is exactly the problem this pr needs to solve.
## Solution
1. Reset `quicklistIter` after insert and replace.
The quicklist node will be compressed in `quicklistInsertAfter`, `quicklistInsertBefore`,
`quicklistReplaceAtIndex`, so we can safely reset the quicklistIter to avoid it being used again
2. `quicklistIndex` will return an iterator that can be used to recompress the current node after use.
## Test
1. In the `Stress Tester for #3343-Similar Errors` test, when the server crashes or when
`valgrind` or `asan` error is detected, print violating commands.
2. Add a crash test due to wrongly recompressing after `lrem`.
3. Remove `insert before with 0 elements` and `insert after with 0 elements`,
Now we forbid any operation on an NULL quicklistIter.
In order to test the situation where multiple clients are
blocked, we set up multiple clients to execute some blocking
commands. These tests depend on the order of command processing.
Those tests are based on the wrong assumption that the command
send first will be executed by the server first, which is obviously
wrong in some network delyas.
This commit ensures orderly execution of commands by waiting
and judging the number of blocked clients each time.
Fix#9850
This commit 0f8b634cd (CVE-2021-32626 released in 6.2.6, 6.0.16, 5.0.14)
fixes an invalid memory write issue by using `lua_checkstack` API to make
sure the Lua stack is not overflow. This fix was added on 3 places:
1. `luaReplyToRedisReply`
2. `ldbRedis`
3. `redisProtocolToLuaType`
On the first 2 functions, `lua_checkstack` is handled gracefully while the
last is handled with an assert and a statement that this situation can
not happened (only with misbehave module):
> the Redis reply might be deep enough to explode the LUA stack (notice
that currently there is no such command in Redis that returns such a nested
reply, but modules might do it)
The issue that was discovered is that user arguments is also considered part
of the stack, and so the following script (for example) make the assertion reachable:
```
local a = {}
for i=1,7999 do
a[i] = 1
end
return redis.call("lpush", "l", unpack(a))
```
This is a regression because such a script would have worked before and now
its crashing Redis. The solution is to clear the function arguments from the Lua
stack which makes the original assumption true and the assertion unreachable.
Writable replicas now no longer use the values of expired keys. Expired keys are
deleted when lookupKeyWrite() is used, even on a writable replica. Previously,
writable replicas could use the value of an expired key in write commands such
as INCR, SUNIONSTORE, etc..
This commit also sorts out the mess around the functions lookupKeyRead() and
lookupKeyWrite() so they now indicate what we intend to do with the key and
are not affected by the command calling them.
Multi-key commands like SUNIONSTORE, ZUNIONSTORE, COPY and SORT with the
store option now use lookupKeyRead() for the keys they're reading from (which will
not allow reading from logically expired keys).
This commit also fixes a bug where PFCOUNT could return a value of an
expired key.
Test modules commands have their readonly and write flags updated to correctly
reflect their lookups for reading or writing. Modules are not required to
correctly reflect this in their command flags, but this change is made for
consistency since the tests serve as usage examples.
Fixes#6842. Fixes#7475.
Remove lcsGetKeys to clean up the remaining STRALGO after #9733.
i.e. it still used a getkeys_proc which was still looking for the KEYS or STRINGS arguments
Part three of implementing #8702, following #8887 and #9366 .
## Description of the feature
1. Replace the ziplist container of quicklist with listpack.
2. Convert existing quicklist ziplists on RDB loading time. an O(n) operation.
## Interface changes
1. New `list-max-listpack-size` config is an alias for `list-max-ziplist-size`.
2. Replace `debug ziplist` command with `debug listpack`.
## Internal changes
1. Add `lpMerge` to merge two listpacks . (same as `ziplistMerge`)
2. Add `lpRepr` to print info of listpack which is used in debugCommand and `quicklistRepr`. (same as `ziplistRepr`)
3. Replace `QUICKLIST_NODE_CONTAINER_ZIPLIST` with `QUICKLIST_NODE_CONTAINER_PACKED`(following #9357 ).
It represent that a quicklistNode is a packed node, as opposed to a plain node.
4. Remove `createZiplistObject` method, which is never used.
5. Calculate listpack entry size using overhead overestimation in `quicklistAllowInsert`.
We prefer an overestimation, which would at worse lead to a few bytes below the lowest limit of 4k.
## Improvements
1. Calling `lpShrinkToFit` after converting Ziplist to listpack, which was missed at #9366.
2. Optimize `quicklistAppendPlainNode` to avoid memcpy data.
## Bugfix
1. Fix crash in `quicklistRepr` when ziplist is compressed, introduced from #9366.
## Test
1. Add unittest for `lpMerge`.
2. Modify the old quicklist ziplist corrupt dump test.
Co-authored-by: Oran Agra <oran@redislabs.com>
In #9323, when `repl-diskless-load` is enabled and set to `swapdb`,
if the master replication ID hasn't changed, we can load data-set
asynchronously, and serving read commands during the full resync.
In `diskless loading short read` test, after a loading successfully,
we will wait for the loading to stop and continue the for loop.
After the introduction of `async_loading`, we also need to check it.
Otherwise the next loop will start too soon, may trigger a timing issue.
In #8287, some overflow checks have been added. But when
`when *= 1000` overflows, it will become a positive number.
And the check not able to catch it. The key will be added with
a short expiration time and will deleted a few seconds later.
In #9601, will check the overflow after `*=` and return an
error first, and avoiding this situation.
In this commit, added some tests to cover those code paths.
Found it in #9825, and close it.
Some people complain that QUIT is missing from help/command table.
Not appearing in COMMAND command, command stats, ACL, etc.
and instead, there's a hack in processCommand with a comment that looks outdated.
Note that it is [documented](https://redis.io/commands/quit)
At the same time, HOST: and POST are there in the command table although these are not real commands.
They would appear in the COMMAND command, and even in commandstats.
Other changes:
1. Initialize the static logged_time static var in securityWarningCommand
2. add `no-auth` flag to RESET so it can always be executed.
Issue found by corrupt-dump-fuzzer test with ASAN.
The problem was that lpSkip and lpGetWithSize could read the next listpack entry without validating that it's in range.
Similarly even the memcmp in lpFind could do that and possibly crash on segfault and now they'll crash on assert first.
The naive fix of using lpAssertValidEntry every time, resulted in 30% degradation in the lpFind benchmark of the unit test.
The final fix with the condition at the bottom has no performance implications.
TCL8.5 can't handle cases where part of the string is escaped and part of it isn't,
if there's a single char that needs escaping, we need to escape the whole string.
The `PEXPIRE/PSETEX/PEXPIREAT can set sub-second expires` test is
a very time sensitive test, it used to occasionally fail on MacOS.
It will perform there internal tests in a loop, as long as one
fails, it will try to excute again in the next loop.
oranagra suggested that we can split it into three individual tests,
so that if one fails, we do not need to retry the others. And maybe
it will increase the chances of success dramatically.
Each is executed 500 times, and the number of retries is collected:
```
PSETEX, total: 500, sum: 745, min: 0, max: 13, avg: 1.49
PEXPIRE, total: 500, sum: 575, min: 0, max: 16, avg: 1.15
PEXPIREAT, total: 500, sum: 0, min: 0, max: 0, avg: 0.0
ALL(old_way), total: 500, sum: 8090, min: 0, max: 138, avg: 16.18
```
And we can see the threshold is very low.
Splitting the test also makes the code better to maintain.
Co-authored-by: Oran Agra <oran@redislabs.com>
Leak found by the corrupt-dump-fuzzer when using GCC ASAN, which seems
to falsely report leaks on pointers kept only on the stack when calling exit.
Instead we now use _exit on panic / assert to skip these leak checks.
Additionally, check for sanitizer warnings in the corrupt-dump-fuzzer between iterations,
so that when something is found we know which test to relate it too (and it prints reproduction command list)
LCS can allocate immense amount of memory (sizes of two inputs multiplied by each other).
In the past this caused some possible security issues due to overflows, which we solved
and also added use of `trymalloc` to return "Insufficient memory" instead of OOM panic zmalloc.
But in case overcommit is enabled, it could be that we won't get the OOM panic, and zmalloc
will succeed, and then we can get OOM killed by the kernel.
The solution here is to prevent LCS from allocating transient memory that's bigger than
`proto-max-bulk-len` config.
This config is not directly related to transient memory, but using a hard coded value ad well as
introducing a specific config seems wrong.
This comes to solve an error in the corrupt-dump-fuzzer test that started in the daily CI see #9799
Background:
Following the upgrade to jemalloc 5.2, there was a test that used to be flaky and
started failing consistently (on 32bit), so we disabled it (see #9645).
This is a test that i introduced in #7289 when i attempted to solve a rare stagnation
problem, and it later turned out i failed to solve it, ans what's more i added a test that
caused it to be not so rare, and as i mentioned, now in jemalloc 5.2 it became consistent on 32bit.
Stagnation can happen when all the slabs of the bin are equally utilized, so the decision
to move an allocation from a relatively empty slab to a relatively full one, will never
happen, and in that test all the slabs are at 50% utilization, so the defragger could just
keep scanning the keyspace and not move anything.
What this PR changes:
* First, finally in jemalloc 5.2 we have the count of non-full slabs, so when we compare
the utilization of the current slab, we can compare it to the average utilization of the non-full
slabs in our bin, instead of the total average of our bin. this takes the full slabs out of the game,
since they're not candidates for migration (neither source nor target).
* Secondly, We add some 12% (100/8) to the decision to defrag an allocation, this is the part
that aims to avoid stagnation, and it's especially important since the above mentioned change
can get us closer to stagnation.
* Thirdly, since jemalloc 5.2 adds sharded bins, we take into account all shards (something
that's missing from the original PR that merged it), this isn't expected to make any difference
since anyway there should be just one shard.
How this was benchmarked.
What i did was run the memefficiency test unit with `--verbose` and compare the defragger hits
and misses the tests reported.
At first, when i took into consideration only the non-full slabs, it got a lot worse (i got into
stagnation, or just got a lot of misses and a lot of hits), but when i added the 10% i got back
to results that were slightly better than the ones of the jemalloc 5.1 branch. i.e. full defragmentation
was achieved with fewer hits (relocations), and fewer misses (keyspace scans).
Recently we started using list-compress-depth in tests (was completely untested till now).
Turns this triggered test failures with the external mode, since the tests left the setting enabled
and then it was used in other tests (specifically the fuzzer named "Stress tester for #3343-alike bugs").
This PR fixes the issue of the `recompress` flag being left set by mistake, which caused the code to
later to compress the head or tail nodes (which should never be compressed)
The solution is to reset the recompress flag when it should have been (when it was decided not to compress).
Additionally we're adding some assertions and improve the tests so in order to catch other similar bugs.
Currently PING returns different status when server is not serving data,
for example when `LOADING` or `BUSY`.
But same was not true for `MASTERDOWN`
This commit makes PING reply with `MASTERDOWN` when
replica-serve-stale-data=no and link is MASTER is down.
Drop the STRALGO command, now LCS is a command of its own and it only works on keys (not input strings).
The motivation is that STRALGO's syntax was really messed-up...
- assumes all (future) string algorithms will take similar arguments
- mixes command that takes keys and one that doesn't in the same command.
- make it nearly impossible to expose the right key spec in COMMAND INFO (issues cluster clients)
- hard for cluster clients to determine the key names (firstkey, lastkey, etc)
- hard for ACL / flags (is it a read command?)
This is a breaking change.
Moves ZPOP ... 0 fast exit path after type check to reply with
WRONGTYPE. In the past it will return an empty array.
Also now count is not allowed to be negative.
see #9680
before:
```
127.0.0.1:6379> set zset str
OK
127.0.0.1:6379> zpopmin zset 0
(empty array)
127.0.0.1:6379> zpopmin zset -1
(empty array)
```
after:
```
127.0.0.1:6379> set zset str
OK
127.0.0.1:6379> zpopmin zset 0
(error) WRONGTYPE Operation against a key holding the wrong kind of value
127.0.0.1:6379> zpopmin zset -1
(error) ERR value is out of range, must be positive
```
Redis supports inserting data over 4GB into string (and recently for lists too, see #9357),
But LZF compression used in RDB files (see `rdbcompression` config), and in quicklist
(see `list-compress-depth` config) does not support compress/decompress data over
UINT32_MAX, which will result in corrupting the rdb after compression.
Internal changes:
1. Modify the `unsigned int` parameter of `lzf_compress/lzf_decompress` to `size_t`.
2. Modify the variable types in `lzf_compress` involving offsets and lengths to `size_t`.
3. Set LZF_USE_OFFSETS to 0.
When LZF_USE_OFFSETS is 1, lzf store offset into `LZF_HSLOT`(32bit).
Even in 64-bit, `LZF_USE_OFFSETS` defaults to 1, because lzf assumes that it only
compresses and decompresses data smaller than UINT32_MAX.
But now we need to make lzf support 64-bit, turning on `LZF_USE_OFFSETS` will make
it impossible to store 64-bit offsets or pointers.
BTW, disable LZF_USE_OFFSETS also brings a few performance improvements.
Tests:
1. Add test for compress/decompress string large than UINT32_MAX.
2. Add unittest for compress/decompress quicklistNode.
Two issues:
1. In many tests we simply forgot to close the connections we created, which doesn't matter for normal tests where the server is killed, but creates a leak on external server tests.
2. When calling `start_server` on external test we create a fresh connection instead of really starting a new server, but never clean it at the end.
I have seen this CI failure twice on MacOS:
*** [err]: PEXPIRE/PSETEX/PEXPIREAT can set sub-second expires in tests/unit/expire.tcl
Expected 'somevalue {} somevalue {} somevalue {}' to equal or match '{} {} {} {} somevalue {}'
I did some loop test in my own daily CI, the results show that is
not particularly stable. Change the threshold from 30 to 50.
- Added sanitizer support. `address`, `undefined` and `thread` sanitizers are available.
- To build Redis with desired sanitizer : `make SANITIZER=undefined`
- There were some sanitizer findings, cleaned up codebase
- Added tests with address and undefined behavior sanitizers to daily CI.
- Added tests with address sanitizer to the per-PR CI (smoke out mem leaks sooner).
Basically, there are three types of issues :
**1- Unaligned load/store** : Most probably, this issue may cause a crash on a platform that
does not support unaligned access. Redis does unaligned access only on supported platforms.
**2- Signed integer overflow.** Although, signed overflow issue can be problematic time to time
and change how compiler generates code, current findings mostly about signed shift or simple
addition overflow. For most platforms Redis can be compiled for, this wouldn't cause any issue
as far as I can tell (checked generated code on godbolt.org).
**3 -Minor leak** (redis-cli), **use-after-free**(just before calling exit());
UB means nothing guaranteed and risky to reason about program behavior but I don't think any
of the fixes here worth backporting. As sanitizers are now part of the CI, preventing new issues
will be the real benefit.
On test failure store the external redis server logs as CI artifacts so we can review them.
Write test name to server log for external server tests.
This is attempted and silently failed in case external server doesn't support it.
Note that in non-external server mode we use a more robust method of writing to the log which doesn't depend on the
server actually running/working. This isn't possible for externl servers and required for some complex tests which are
skipped in external mode anyway.
Cleanup: remove dup code.
First, avoid using --accurate on the freebsd CI, we only care about
systematic issues there due to being different platform, but not
accuracy
Secondly, when looking at the test which timed out it seems silly and
outdated:
- it used KEYS to attempt to trigger lazy expiry, but KEYS doesn't do
that anymore.
- it used some hard coded sleeps rather than waiting for things to
happen and exiting ASAP
We saw some tests sporadically time out on valgrind (namely the ones
from #9323).
Increasing valgrind timeout from 20 mins to 40 mins in CI.
And fixing an outdated help message.
In both tests, "diskless loading short read" and "diskless loading short read with module",
the timeout of waiting for the replica to respond to a short read and log it, is too short.
Also, add --dump-logs in runtest-moduleapi for valgrind runs.
Optimized port detection for tcl, use 'socket -server' instead of 'socket' to rule out port on TIME_WAIT
Co-authored-by: chendianqiang <chendianqiang@meituan.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
For diskless replication in swapdb mode, considering we already spend replica memory
having a backup of current db to restore in case of failure, we can have the following benefits
by instead swapping database only in case we succeeded in transferring db from master:
- Avoid `LOADING` response during failed and successful synchronization for cases where the
replica is already up and running with data.
- Faster total time of diskless replication, because now we're moving from Transfer + Flush + Load
time to Transfer + Load only. Flushing the tempDb is done asynchronously after swapping.
- This could be implemented also for disk replication with similar benefits if consumers are willing
to spend the extra memory usage.
General notes:
- The concept of `backupDb` becomes `tempDb` for clarity.
- Async loading mode will only kick in if the replica is syncing from a master that has the same
repl-id the one it had before. i.e. the data it's getting belongs to a different time of the same timeline.
- New property in INFO: `async_loading` to differentiate from the blocking loading
- Slot to Key mapping is now a field of `redisDb` as it's more natural to access it from both server.db
and the tempDb that is passed around.
- Because this is affecting replicas only, we assume that if they are not readonly and write commands
during replication, they are lost after SYNC same way as before, but we're still denying CONFIG SET
here anyways to avoid complications.
Considerations for review:
- We have many cases where server.loading flag is used and even though I tried my best, there may
be cases where async_loading should be checked as well and cases where it shouldn't (would require
very good understanding of whole code)
- Several places that had different behavior depending on the loading flag where actually meant to just
handle commands coming from the AOF client differently than ones coming from real clients, changed
to check CLIENT_ID_AOF instead.
**Additional for Release Notes**
- Bugfix - server.dirty was not incremented for any kind of diskless replication, as effect it wouldn't
contribute on triggering next database SAVE
- New flag for RM_GetContextFlags module API: REDISMODULE_CTX_FLAGS_ASYNC_LOADING
- Deprecated RedisModuleEvent_ReplBackup. Starting from Redis 7.0, we don't fire this event.
Instead, we have the new RedisModuleEvent_ReplAsyncLoad holding 3 sub-events: STARTED,
ABORTED and COMPLETED.
- New module flag REDISMODULE_OPTIONS_HANDLE_REPL_ASYNC_LOAD for RedisModule_SetModuleOptions
to allow modules to declare they support the diskless replication with async loading (when absent, we fall
back to disk-based loading).
Co-authored-by: Eduardo Semprebon <edus@saxobank.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Introduced in #8179, this fixes the command's replies in the 0 count edge case.
[BREAKING] changes the reply type when count is 0 to an empty array (instead of nil)
Moves LPOP ... 0 fast exit path after type check to reply with WRONGTYPE
When repl-diskless-load is enabled, the connection is set to the blocking state.
The connection may be interrupted by a signal during a system call.
This would have resulted in a disconnection and possibly a reconnection loop.
Co-authored-by: Oran Agra <oran@redislabs.com>
there was a chance that by the time the assertion is executed,
the replica already manages to reconnect.
now we make sure the replica is unable to re-connect to the master.
additionally, we wait for some gossip from the disconnected replica,
to see that it doesn't mess things up.
unrelated: fix a typo when trying to exhaust the backlog, one that
didn't have any harmful implications
Co-authored-by: Madelyn Olson <madelyneolson@gmail.com>
Redis lists are stored in quicklist, which is currently a linked list of ziplists.
Ziplists are limited to storing elements no larger than 4GB, so when bigger
items are added they're getting truncated.
This PR changes quicklists so that they're capable of storing large items
in quicklist nodes that are plain string buffers rather than ziplist.
As part of the PR there were few other changes in redis:
1. new DEBUG sub-commands:
- QUICKLIST-PACKED-THRESHOLD - set the threshold of for the node type to
be plan or ziplist. default (1GB)
- QUICKLIST <key> - Shows low level info about the quicklist encoding of <key>
2. rdb format change:
- A new type was added - RDB_TYPE_LIST_QUICKLIST_2 .
- container type (packed / plain) was added to the beginning of the rdb object
(before the actual node list).
3. testing:
- Tests that requires over 100MB will be by default skipped. a new flag was
added to 'runtest' to run the large memory tests (not used by default)
Co-authored-by: sundb <sundbcn@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Add new no-mandatory-keys flag to support COMMAND GETKEYS of commands
which have no mandatory keys.
In the past we would have got this error:
```
127.0.0.1:6379> command getkeys eval "return 1" 0
(error) ERR Invalid arguments specified for command
```
The issue was that setting maxmemory to used_memory and expecting
eviction is insufficient, since we need to take
mem_not_counted_for_evict into consideration.
This test got broken by #9166
The External tests started failing recently for unclear reason:
```
*** [err]: Tracking invalidation message of eviction keys should be before response in tests/unit/tracking.tcl
Expected '0' to be equal to 'invalidate volatile-key' (context: type eval line 21 cmd {assert_equal $res {invalidate volatile-key}} proc ::test)
```
I suspect the issue is that the used_memory sample is taken while a lazy free is still being processed.
So it looks like sampling set loglines [count_log_lines -2] was
executed too late, and the replication managed to complete before that.
```
*** [err]: diskless no replicas drop during rdb pipe in tests/integration/replication.tcl
log message of '"*Diskless rdb transfer, done reading from pipe, 2 replicas still up*"' not found in ./tests/tmp/server.6124.69/stdout after line: 52 till line: 52
```
Changes:
1. when we search the master log file, we start to search from before we sent the REPLICAOF
command, to prevent a race in which the replication completed before we sampled the log line count.
2. we don't need to sample the replica loglines sine it's a fresh resplica that's just been started, so the message
we're looking for is the first occurrence in the log, we can start search from 0.
Co-authored-by: Oran Agra <oran@redislabs.com>
Test failed on freebsd:
```
*** [err]: Make the old master a replica of the new one and check conditions in tests/integration/psync2-pingoff.tcl
Expected '162' to be equal to '176' (context: type eval line 18 cmd {assert_equal [status $R(0) master_repl_offset] [status $R(1) master_repl_offset]} proc ::test)
```
There are two possible race conditions in the test.
1. The code waits for sync_full to increment, and assumes that means the
master did the fork. But in fact there are cases the master will increment
that sync_full counter (after replica asks for sync), but will see that
there's already a fork running and will delay the fork creation.
In this case the INCR will be executed before the fork happens, so it'll
not be in the command stream. Solve that by waiting for `master_link_status: up`
on the replica before the INCR.
2. The repl-ping-replica-period is still high (1 second), so there's a chance the
master will send an additional PING between the two calls to INFO (the line that
fails is the one that samples INFO from both servers). So there's a chance one of
them will have an incremented offset due to PING and the other won't have it yet.
In theory we can wait for the repl_offset to match, but then we risk facing a
situation where that race will hide an offset mis-match. so instead, i think we
should just change repl-ping-replica-period to prevent further pings from being pushed.
Co-authored-by: Oran Agra <oran@redislabs.com>
The module test in reply.tcl was introduced by #8521 but didn't run until recently (see #9639)
and then it started failing with valgrind.
This is because valgrind uses 64 bit long double (unlike most other platforms that have at least 80 bits)
But besides valgrind, the tests where also incompatible with ARM32, which also uses 64 bit long doubles.
We now use appropriate value to avoid issues with either valgrind or ARM32
In all the double tests, i use 3.141, which is safe since since addReplyDouble uses
`%.17Lg` which is able to represent this value without adding any digits due to precision loss.
In the long double, since we use `%.17Lf` in ld2string, it preserves 17 significant
digits, rather than 17 digit after the decimal point (like in `%.17Lg`).
So to make these similar, i use value lower than 1 (no digits left of
the period)
Lastly, we have the same issue with TCL (no long doubles) so we read
raw protocol in that test.
Note that the only error before this fix (in both valgrind and ARM32 is this:
```
*** [err]: RM_ReplyWithLongDouble: a float reply in tests/unit/moduleapi/reply.tcl
Expected '3.141' to be equal to '3.14100000000000001' (context: type eval line 2 cmd {assert_equal 3.141 [r rw.longdouble 3.141]} proc ::test)
```
so the changes to debug.c and scripting.tcl aren't really needed, but i consider them a cleanup
(i.e. scripting.c validated a different constant than the one that's sent to it from debug.c).
Another unrelated change is to add the RESP version to the repeated tests in reply.tcl
Fix failures introduced by #9695 which was an attempt to solve failures introduced by #9679.
And alternative to #9703 (i didn't like the extra argument to kill_instance).
Reverting #9695.
Instead of stopping AOF on all terminations, stop it only on the two which need it.
Do it as part of the test rather than the infra (it was add that kill_instance used `R`
to communicate to the instance)
Note that the original purpose of these tests was to trigger a crash, but that upsets
valgrind so in redis 6.2 i changed it to use SIGTERM, so i now rename the tests
(remove "kill" and "crash").
Also add some colors to failures, and the word "FAILED" so that it's searchable.
And solve a semi-related race condition in 14-consistency-check.tcl
This solves several problems in a more elegant way:
* No need to explicitly use `-lc` on x86_64 when building with `-m32`.
* Avoids issues with undefined floating point emulation funcs on ARM.
The previous code did not check whether COUNT is set.
So we can use `lmpop 2 key1 key2 left count 1 count 2`.
This situation can occur in LMPOP/BLMPOP/ZMPOP/BZMPOP commands.
LMPOP/BLMPOP introduced in #9373, ZMPOP/BZMPOP introduced in #9484.
When stopping an instance in the cluster tests, disable appendonly first, so that SIGTERM won't be ignored.
Recently in #9679 i change the test infra to use SIGSEGV to kill servers that refuse
the SIGTERM rather than do SIGKILL directly.
This surfaced an issue that i've added in #7725 which changed SIGKILL to SIGTERM (to resolve valgrind issues).
So the current situation in the past months was that sometimes servers refused the
SIGTERM and waited 10 seconds for the SIGKILL, and this commit resolves that (faster termination).
