This was a regression from #7625 (only in 6.2 RC2).
This makes it possible again to implement blocking list and zset
commands using the modules API.
This commit also includes a test case for the reverse: A module
unblocks a client blocked on BLPOP by inserting elements using
RedisModule_ListPush(). This already works, but it was untested.
This adds basic coverage to IO threads by running the cluster and few selected Redis test suite tests with the IO threads enabled.
Also provides some necessary additional improvements to the test suite:
* Add --config to sentinel/cluster tests for arbitrary configuration.
* Fix --tags whitelisting which was broken.
* Add a `network` tag to some tests that are more network intensive. This is work in progress and more tests should be properly tagged in the future.
* Adds ASYNC and SYNC arguments to SCRIPT FLUSH
* Adds SYNC argument to FLUSHDB and FLUSHALL
* Adds new config to control the default behavior of FLUSHDB, FLUSHALL and SCRIPT FLUASH.
the new behavior is as follows:
* FLUSH[ALL|DB],SCRIPT FLUSH: Determine sync or async according to the
value of lazyfree-lazy-user-flush.
* FLUSH[ALL|DB],SCRIPT FLUSH ASYNC: Always flushes the database in an async manner.
* FLUSH[ALL|DB],SCRIPT FLUSH SYNC: Always flushes the database in a sync manner.
This fixes three issues:
1. Using debug SLEEP was impacting the subsequent test, and causing it to pass reliably even though it should have failed. There was exactly 5 seconds of artificial pause (after 1000, wait 3000, wait 1000) between the debug sleep 5 and when we needed to unblock the client in the subsequent test. Now the test properly makes sure the client is unblocked, and the subsequent test is fixed.
2. Minor, the client pause types were using & comparisons instead of ==, since it was previously a flag.
3. Test is faster now that some of the hand wavy time is removed.
This PR adds another trimming strategy to XADD and XTRIM named MINID
(complements the existing MAXLEN).
It also adds a new LIMIT argument that allows incremental trimming by repeated
calls (rather than all at once).
This provides the ability to trim all records older than a certain ID (which makes it
possible for the user to trim by age too).
Example:
XTRIM mystream MINID ~ 1608540753 will trim entries with id < 1608540753,
but might not trim all (because of the ~ modifier)
The purpose is to ease the use of streams. many users use streams as logs and
the common case is wanting a log
of the last X seconds rather than a log that contains maximum X entries (new
MINID vs existing MAXLEN)
The new LIMIT modifier is only supported when the trim strategy uses ~.
i.e. when the user asked for exact trimming, it all happens in one go (no
possibility for incremental trimming).
However, when ~ is provided, we trim full rax nodes, up to the limit number
of records.
The default limit is 100*stream_node_max_entries (used when LIMIT is not
provided).
I.e. this is a behavior change (even if the existing MAXLEN strategy is used).
An explicit limit of 0 means unlimited (but note that it's not the default).
Other changes:
Refactor arg parsing code for XADD and XTRIM to use common code.
The defragger works well on these systems, but the tests and their
thresholds are not adjusted for these big pages, so the defragger isn't
able to get down the fragmentation to the levels the test expects and it
fails on "defrag didn't stop".
Randomly choosing 8k as the threshold for the skipping
Fixes#8265 (which had 65k pages)
Add ZRANGESTORE command, and improve ZSTORE command to deprecated Z[REV]RANGE[BYSCORE|BYLEX].
Syntax for the new ZRANGESTORE command:
ZRANGESTORE [BYSCORE | BYLEX] [REV] [LIMIT offset count]
New syntax for ZRANGE:
ZRANGE [BYSCORE | BYLEX] [REV] [WITHSCORES] [LIMIT offset count]
Old syntax for ZRANGE:
ZRANGE [WITHSCORES]
Other ZRANGE commands remain unchanged.
The implementation uses common code for all of these, by utilizing a consumer interface that in one
command response to the client, and in the other command stores a zset key.
Co-authored-by: Oran Agra <oran@redislabs.com>
New command: XAUTOCLAIM <key> <group> <consumer> <min-idle-time> <start> [COUNT <count>] [JUSTID]
The purpose is to claim entries from a stale consumer without the usual
XPENDING+XCLAIM combo which takes two round trips.
The syntax for XAUTOCLAIM is similar to scan: A cursor is returned (streamID)
by each call and should be used as start for the next call. 0-0 means the scan is complete.
This PR extends the deferred reply mechanism for any bulk string (not just counts)
This PR carries some unrelated test code changes:
- Renames the term "client" into "consumer" in the stream-cgroups test
- And also changes DEBUG SLEEP into "after"
Co-authored-by: Oran Agra <oran@redislabs.com>
When a Lua script returns a map to redis (a feature which was added in
redis 6 together with RESP3), it would have returned the value first and
the key second.
If the client was using RESP2, it was getting them out of order, and if
the client was in RESP3, it was getting a map of value => key.
This was happening regardless of the Lua script using redis.setresp(3)
or not.
This also affects a case where the script was returning a map which it got
from from redis by doing something like: redis.setresp(3); return redis.call()
This fix is a breaking change for redis 6.0 users who happened to rely
on the wrong order (either ones that used redis.setresp(3), or ones that
returned a map explicitly).
This commit also includes other two changes in the tests:
1. The test suite now handles RESP3 maps as dicts rather than nested
lists
2. Remove some redundant (duplicate) tests from tracking.tcl
This PR not only fixes the problem that swapdb does not make the
transaction fail, but also optimizes the FLUSHALL and FLUSHDB command to
set the CLIENT_DIRTY_CAS flag to avoid unnecessary traversal of clients.
FLUSHDB was changed to first iterate on all watched keys, and then on the
clients watching each key.
Instead of iterating though all clients, and for each iterate on watched keys.
Co-authored-by: Oran Agra <oran@redislabs.com>
New command flags similar to what SADD already has.
Co-authored-by: huangwei03 <huangwei03@kuaishou.com>
Co-authored-by: Itamar Haber <itamar@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
This Commit pushes forward the observability on overall error statistics and command statistics within redis-server:
It extends INFO COMMANDSTATS to have
- failed_calls in - so we can keep track of errors that happen from the command itself, broken by command.
- rejected_calls - so we can keep track of errors that were triggered outside the commmand processing per se
Adds a new section to INFO, named ERRORSTATS that enables keeping track of the different errors that
occur within redis ( within processCommand and call ) based on the reply Error Prefix ( The first word
after the "-", up to the first space ).
This commit also fixes RM_ReplyWithError so that it can be correctly identified as an error reply.
Adds: `L/RPOP <key> [count]`
Implements no. 2 of the following strategies:
1. Loop on listTypePop - this would result in multiple calls for memory freeing and allocating (see 769167a079)
2. Iterate the range to build the reply, then call quickListDelRange - this requires two iterations and **is the current choice**
3. Refactor quicklist to have a pop variant of quickListDelRange - probably optimal but more complex
Also:
* There's a historical check for NULL after calling listTypePop that was converted to an assert.
* This refactors common logic shared between LRANGE and the new form of LPOP/RPOP into addListRangeReply (adds test for b/w compat)
* Consequently, it may have made sense to have `LRANGE l -1 -2` and `LRANGE l 9 0` be legit and return a reverse reply. Due to historical reasons that would be, however, a breaking change.
* Added minimal comments to existing commands to adhere to the style, make core dev life easier and get commit karma, naturally.
In the distant history there was only the read flag for commands, and whatever
command that didn't have the read flag was a write one.
Then we added the write flag, but some portions of the code still used !read
Also some commands that don't work on the keyspace at all, still have the read
flag.
Changes in this commit:
1. remove the read-only flag from TIME, ECHO, ROLE and LASTSAVE
2. EXEC command used to decides if it should propagate a MULTI by looking at
the command flags (!read & !admin).
When i was about to change it to look at the write flag instead, i realized
that this would cause it not to propagate a MULTI for PUBLISH, EVAL, and
SCRIPT, all 3 are not marked as either a read command or a write one (as
they should), but all 3 are calling forceCommandPropagation.
So instead of introducing a new flag to denote a command that "writes" but
not into the keyspace, and still needs propagation, i decided to rely on
the forceCommandPropagation, and just fix the code to propagate MULTI when
needed rather than depending on the command flags at all.
The implication of my change then is that now it won't decide to propagate
MULTI when it sees one of these: SELECT, PING, INFO, COMMAND, TIME and
other commands which are neither read nor write.
3. Changing getNodeByQuery and clusterRedirectBlockedClientIfNeeded in
cluster.c to look at !write rather than read flag.
This should have no implications, since these code paths are only reachable
for commands which access keys, and these are always marked as either read
or write.
This commit improve MULTI propagation tests, for modules and a bunch of
other special cases, all of which used to pass already before that commit.
the only one that test change that uncovered a change of behavior is the
one that DELs a non-existing key, it used to propagate an empty
multi-exec block, and no longer does.
Additionally the older defrag tests are using an obsolete way to check
if the defragger is suuported (the error no longer contains "DISABLED").
this doesn't usually makes a difference since these tests are completely
skipped if the allocator is not jemalloc, but that would fail if the
allocator is a jemalloc that doesn't support defrag.
Add a new set of defrag functions that take a defrag context and allow
defragmenting memory blocks and RedisModuleStrings.
Modules can register a defrag callback which will be invoked when the
defrag process handles globals.
Modules with custom data types can also register a datatype-specific
defrag callback which is invoked for keys that require defragmentation.
The callback and associated functions support both one-step and
multi-step options, depending on the complexity of the key as exposed by
the free_effort callback.
Add commands to query geospatial data with bounding box.
Two new commands that replace the existing 4 GEORADIUS* commands.
GEOSEARCH key [FROMMEMBER member] [FROMLOC long lat] [BYRADIUS radius
unit] [BYBOX width height unit] [WITHCORD] [WITHDIST] [WITHASH] [COUNT
count] [ASC|DESC]
GEOSEARCHSTORE dest_key src_key [FROMMEMBER member] [FROMLOC long lat]
[BYRADIUS radius unit] [BYBOX width height unit] [WITHCORD] [WITHDIST]
[WITHASH] [COUNT count] [ASC|DESC] [STOREDIST]
- Add two types of CIRCULAR_TYPE and RECTANGLE_TYPE to achieve different searches
- Judge whether the point is within the rectangle, refer to:
geohashGetDistanceIfInRectangle
This adds a new `tls-client-cert-file` and `tls-client-key-file`
configuration directives which make it possible to use different
certificates for the TLS-server and TLS-client functions of Redis.
This is an optional directive. If it is not specified the `tls-cert-file`
and `tls-key-file` directives are used for TLS client functions as well.
Also, `utils/gen-test-certs.sh` now creates additional server-only and client-only certs and will skip intensive operations if target files already exist.
This adds a copy callback for module data types, in order to make
modules compatible with the new COPY command.
The callback is optional and COPY will fail for keys with data types
that do not implement it.
Module blocked clients cache the response in a temporary client,
the reply list in this client would be affected by the recent fix
in #7202, but when the reply is later copied into the real client,
it would have bypassed all the checks for output buffer limit, which
would have resulted in both: responding with a partial response to
the client, and also not disconnecting it at all.
c4fdf09c0 added a test that now fails with valgrind
it fails for two resons:
1) the test samples the used memory and then limits the maxmemory to
that value, but it turns out this is not atomic and on slow machines
the background cron process that clean out old query buffers reduces
the memory so that the setting doesn't cause eviction.
2) the dbsize was tested late, after reading some invalidation messages
by that time more and more keys got evicted, partially draining the
db. this is not the focus of this fix (still a known limitation)
when the same consumer re-claim an entry that it already has, there's
no need to remove-and-insert if it's the same rax.
we do need to update the idle time though.
this commit only improves efficiency (doesn't change behavior).
* Add CLIENT INFO subcommand.
The output is identical to CLIENT LIST but provides a single line for
the current client only.
* Add CLIENT LIST ID [id...].
Co-authored-by: Itamar Haber <itamar@redislabs.com>
The test creates keys with various encodings, DUMP them, corrupt the payload
and RESTORES it.
It utilizes the recently added use-exit-on-panic config to distinguish between
asserts and segfaults.
If the restore succeeds, it runs random commands on the key to attempt to
trigger a crash.
It runs in two modes, one with deep sanitation enabled and one without.
In the first one we don't expect any assertions or segfaults, in the second one
we expect assertions, but no segfaults.
We also check for leaks and invalid reads using valgrind, and if we find them
we print the commands that lead to that issue.
Changes in the code (other than the test):
- Replace a few NPD (null pointer deference) flows and division by zero with an
assertion, so that it doesn't fail the test. (since we set the server to use
`exit` rather than `abort` on assertion).
- Fix quite a lot of flows in rdb.c that could have lead to memory leaks in
RESTORE command (since it now responds with an error rather than panic)
- Add a DEBUG flag for SET-SKIP-CHECKSUM-VALIDATION so that the test don't need
to bother with faking a valid checksum
- Remove a pile of code in serverLogObjectDebugInfo which is actually unsafe to
run in the crash report (see comments in the code)
- fix a missing boundary check in lzf_decompress
test suite infra improvements:
- be able to run valgrind checks before the process terminates
- rotate log files when restarting servers
- improve stream rdb encoding test to include more types of stream metadata
- add test to cover various ziplist encoding entries (although it does
look like the stress test above it is able to find some too
- add another test for ziplist encoding for hash with full sanitization
- add similar ziplist encoding tests for list
When client tracking is enabled signalModifiedKey can increase memory usage,
this can cause the loop in performEvictions to keep running since it was measuring
the memory usage impact of signalModifiedKey.
The section that measures the memory impact of the eviction should be just on dbDelete,
excluding keyspace notification, client tracking, and propagation to AOF and replicas.
This resolves part of the problem described in #8069
p.s. fix took 1 minute, test took about 3 hours to write.
One way this was happening is when a module issued an RM_Call which would inject MULTI.
If the module command that does that was itself issued by something else that already did
added MULTI (e.g. another module, or a Lua script), it would have caused nested MULTI.
In fact the MULTI state in the client or the MULTI_EMITTED flag in the context isn't
the right indication that we need to propagate MULTI or not, because on a nested calls
(possibly a module action called by a keyspace event of another module action), these
flags aren't retained / reflected.
instead there's now a global propagate_in_transaction flag for that.
in addition to that, we now have a global in_eval and in_exec flags, to serve the flags
of RM_GetContextFlags, since their dependence on the current client is wrong for the same
reasons mentioned above.
As we know, redis may reject user's requests or evict some keys if
used memory is over maxmemory. Dictionaries expanding may make
things worse, some big dictionaries, such as main db and expires dict,
may eat huge memory at once for allocating a new big hash table and be
far more than maxmemory after expanding.
There are related issues: #4213#4583
More details, when expand dict in redis, we will allocate a new big
ht[1] that generally is double of ht[0], The size of ht[1] will be
very big if ht[0] already is big. For db dict, if we have more than
64 million keys, we need to cost 1GB for ht[1] when dict expands.
If the sum of used memory and new hash table of dict needed exceeds
maxmemory, we shouldn't allow the dict to expand. Because, if we
enable keys eviction, we still couldn't add much more keys after
eviction and rehashing, what's worse, redis will keep less keys when
redis only remains a little memory for storing new hash table instead
of users' data. Moreover users can't write data in redis if disable
keys eviction.
What this commit changed ?
Add a new member function expandAllowed for dict type, it provide a way
for caller to allow expand or not. We expose two parameters for this
function: more memory needed for expanding and dict current load factor,
users can implement a function to make a decision by them.
For main db dict and expires dict type, these dictionaries may be very
big and cost huge memory for expanding, so we implement a judgement
function: we can stop dict to expand provisionally if used memory will
be over maxmemory after dict expands, but to guarantee the performance
of redis, we still allow dict to expand if dict load factor exceeds the
safe load factor.
Add test cases to verify we don't allow main db to expand when left
memory is not enough, so that avoid keys eviction.
Other changes:
For new hash table size when expand. Before this commit, the size is
that double used of dict and later _dictNextPower. Actually we aim to
control a dict load factor between 0.5 and 1.0. Now we replace *2 with
+1, since the first check is that used >= size, the outcome of before
will usually be the same as _dictNextPower(used+1). The only case where
it'll differ is when dict_can_resize is false during fork, so that later
the _dictNextPower(used*2) will cause the dict to jump to *4 (i.e.
_dictNextPower(1025*2) will return 4096).
Fix rehash test cases due to changing algorithm of new hash table size
when expand.
SELECT used to read the index into a `long` variable, and then pass it to a function
that takes an `int`, possibly causing an overflow before the range check.
Now all these commands use better and cleaner range check, and that also results in
a slight change of the error response in case of an invalid database index.
SELECT:
in the past it would have returned either `-ERR invalid DB index` (if not a number),
or `-ERR DB index is out of range` (if not between 1..16 or alike).
now it'll return either `-ERR value is out of range` (if not a number), or
`-ERR value is out of range, value must between -2147483648 and 2147483647`
(if not in the range for an int), or `-ERR DB index is out of range`
(if not between 0..16 or alike)
MOVE:
in the past it would only fail with `-ERR index out of range` no matter the reason.
now return the same errors as the new ones for SELECT mentioned above.
(i.e. unlike for SELECT even for a value like 17 we changed the error message)
COPY:
doesn't really matter how it behaved in the past (new command), new behavior is
like the above two.
Fixes#7923.
This PR appropriates the special `&` symbol (because `@` and `*` are taken),
followed by a literal value or pattern for describing the Pub/Sub patterns that
an ACL user can interact with. It is similar to the existing key patterns
mechanism in function (additive) and implementation (copy-pasta). It also adds
the allchannels and resetchannels ACL keywords, naturally.
The default user is given allchannels permissions, whereas new users get
whatever is defined by the acl-pubsub-default configuration directive. For
backward compatibility in 6.2, the default of this directive is allchannels but
this is likely to be changed to resetchannels in the next major version for
stronger default security settings.
Unless allchannels is set for the user, channel access permissions are checked
as follows :
* Calls to both PUBLISH and SUBSCRIBE will fail unless a pattern matching the
argumentative channel name(s) exists for the user.
* Calls to PSUBSCRIBE will fail unless the pattern(s) provided as an argument
literally exist(s) in the user's list.
Such failures are logged to the ACL log.
Runtime changes to channel permissions for a user with existing subscribing
clients cause said clients to disconnect unless the new permissions permit the
connections to continue. Note, however, that PSUBSCRIBErs' patterns are matched
literally, so given the change bar:* -> b*, pattern subscribers to bar:* will be
disconnected.
Notes/questions:
* UNSUBSCRIBE, PUNSUBSCRIBE and PUBSUB remain unprotected due to lack of reasons
for touching them.
The bug was introduced by #5021 which only attempted avoid EXIST on an
already expired key from returning 1 on a replica.
Before that commit, dbExists was used instead of
lookupKeyRead (which had an undesired effect to "touch" the LRU/LFU)
Other than that, this commit fixes OBJECT to also come empty handed on
expired keys in replica.
And DEBUG DIGEST-VALUE to behave like DEBUG OBJECT (get the data from
the key regardless of it's expired state)
Blocking command should not be used with MULTI, LUA, and RM_Call. This is because,
the caller, who executes the command in this context, expects a reply.
Today, LUA and MULTI have a special (and different) treatment to blocking commands:
LUA - Most commands are marked with no-script flag which are checked when executing
and command from LUA, commands that are not marked (like XREAD) verify that their
blocking mode is not used inside LUA (by checking the CLIENT_LUA client flag).
MULTI - Command that is going to block, first verify that the client is not inside
multi (by checking the CLIENT_MULTI client flag). If the client is inside multi, they
return a result which is a match to the empty key with no timeout (for example blpop
inside MULTI will act as lpop)
For modules that perform RM_Call with blocking command, the returned results type is
REDISMODULE_REPLY_UNKNOWN and the caller can not really know what happened.
Disadvantages of the current state are:
No unified approach, LUA, MULTI, and RM_Call, each has a different treatment
Module can not safely execute blocking command (and get reply or error).
Though It is true that modules are not like LUA or MULTI and should be smarter not
to execute blocking commands on RM_Call, sometimes you want to execute a command base
on client input (for example if you create a module that provides a new scripting
language like javascript or python).
While modules (on modules command) can check for REDISMODULE_CTX_FLAGS_LUA or
REDISMODULE_CTX_FLAGS_MULTI to know not to block the client, there is no way to
check if the command came from another module using RM_Call. So there is no way
for a module to know not to block another module RM_Call execution.
This commit adds a way to unify the treatment for blocking clients by introducing
a new CLIENT_DENY_BLOCKING client flag. On LUA, MULTI, and RM_Call the new flag
turned on to signify that the client should not be blocked. A blocking command
verifies that the flag is turned off before blocking. If a blocking command sees
that the CLIENT_DENY_BLOCKING flag is on, it's not blocking and return results
which are matches to empty key with no timeout (as MULTI does today).
The new flag is checked on the following commands:
List blocking commands: BLPOP, BRPOP, BRPOPLPUSH, BLMOVE,
Zset blocking commands: BZPOPMIN, BZPOPMAX
Stream blocking commands: XREAD, XREADGROUP
SUBSCRIBE, PSUBSCRIBE, MONITOR
In addition, the new flag is turned on inside the AOF client, we do not want to
block the AOF client to prevent deadlocks and commands ordering issues (and there
is also an existing assert in the code that verifies it).
To keep backward compatibility on LUA, all the no-script flags on existing commands
were kept untouched. In addition, a LUA special treatment on XREAD and XREADGROUP was kept.
To keep backward compatibility on MULTI (which today allows SUBSCRIBE, and PSUBSCRIBE).
We added a special treatment on those commands to allow executing them on MULTI.
The only backward compatibility issue that this PR introduces is that now MONITOR
is not allowed inside MULTI.
Tests were added to verify blocking commands are not blocking the client on LUA, MULTI,
or RM_Call. Tests were added to verify the module can check for CLIENT_DENY_BLOCKING flag.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Itamar Haber <itamar@redislabs.com>
ZREVRANGEBYSCORE key max min [WITHSCORES] [LIMIT offset count]
When the offset is too large, the query is very slow. Especially when the offset is greater than the length of zset it is easy to determine whether the offset is greater than the length of zset at first, and If it exceed the length of zset, then return directly.
Co-authored-by: Oran Agra <oran@redislabs.com>
Syntax:
COPY <key> <new-key> [DB <dest-db>] [REPLACE]
No support for module keys yet.
Co-authored-by: tmgauss
Co-authored-by: Itamar Haber <itamar@redislabs.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Add two optional callbacks to the RedisModuleTypeMethods structure, which is `free_effort`
and `unlink`. the `free_effort` callback indicates the effort required to free a module memory.
Currently, if the effort exceeds LAZYFREE_THRESHOLD, the module memory may be released
asynchronously. the `unlink` callback indicates the key has been removed from the DB by redis, and
may soon be freed by a background thread.
Add `lazyfreed_objects` info field, which represents the number of objects that have been
lazyfreed since redis was started.
Add `RM_GetTypeMethodVersion` API, which return the current redis-server runtime value of
`REDISMODULE_TYPE_METHOD_VERSION`. You can use that when calling `RM_CreateDataType` to know
which fields of RedisModuleTypeMethods are gonna be supported and which will be ignored.
- Add ZDIFF and ZDIFFSTORE which work similarly to SDIFF and SDIFFSTORE
- Make sure the new WITHSCORES argument that was added for ZUNION isn't considered valid for ZUNIONSTORE
Co-authored-by: Oran Agra <oran@redislabs.com>
Test support for the new map, null and push message types. Map objects are parsed as a list of lists of key value pairs.
for instance: user => john password => 123
will be parsed to the following TCL list:
{{user john} {password 123}}
Also added the following tests:
Redirection still works with RESP3
Able to use a RESP3 client as a redirection client
No duplicate invalidation messages when turning BCAST mode on after normal tracking
Server is able to evacuate enough keys when num of keys surpasses limit by more than defined initial effort
Different clients using different protocols can track the same key
OPTOUT tests
OPTIN tests
Clients can redirect to the same connection
tracking-redir-broken test
HELLO 3 checks
Invalidation messages still work when using RESP3, with and without redirection
Switching to RESP3 doesn't disturb previous tracked keys
Tracking info is correct
Flushall and flushdb produce invalidation messages
These tests achieve 100% line coverage for tracking.c using lcov.
Perform full reset of all client connection states, is if the client was
disconnected and re-connected. This affects:
* MULTI state
* Watched keys
* MONITOR mode
* Pub/Sub subscription
* ACL/Authenticated state
* Client tracking state
* Cluster read-only/asking state
* RESP version (reset to 2)
* Selected database
* CLIENT REPLY state
The response is +RESET to make it easily distinguishable from other
responses.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Itamar Haber <itamar@redislabs.com>
Not disabling save, slower systems begun background save that did not
complete in time, resulting with SAVE failing with "ERR Background save
already in progress".
In redisFork(), we don't set child pid, so updateDictResizePolicy()
doesn't take effect, that isn't friendly for copy-on-write.
The bug was introduced this in redis 6.0: 56258c6
This wrong behavior was backed by a test, and also documentation, and dates back to 2010.
But it makes no sense to anyone involved so it was decided to change that.
Note that 20eeddf (invalidate watch on expire on access) was released in 6.0 RC2
and 2d1968f released in in 6.0.0 GA (invalidate watch when key is evicted).
both of which do similar changes.
introduces a NOMKSTREAM option for xadd command, this would be useful for some
use cases when we do not want to create new stream by default:
XADD key [MAXLEN [~|=] <count>] [NOMKSTREAM] <ID or *> [field value] [field value]
* Introduce a new API's: RM_GetContextFlagsAll, and
RM_GetKeyspaceNotificationFlagsAll that will return the
full flags mask of each feature. The module writer can
check base on this value if the Flags he needs are
supported or not.
* For each flag, introduce a new value on redismodule.h,
this value represents the LAST value and should be there
as a reminder to update it when a new value is added,
also it will be used in the code to calculate the full
flags mask (assuming flags are incrementally increasing).
In addition, stated that the module writer should not use
the LAST flag directly and he should use the GetFlagAll API's.
* Introduce a new API: RM_IsSubEventSupported, that returns for a given
event and subevent, whether or not the subevent supported.
* Introduce a new macro RMAPI_FUNC_SUPPORTED(func) that returns whether
or not a function API is supported by comparing it to NULL.
* Introduce a new API: int RM_GetServerVersion();, that will return the
current Redis version in the format 0x00MMmmpp; e.g. 0x00060008;
* Changed unstable version from 999.999.999 to 255.255.255
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
The main motivation here is to provide a way for modules to create a
single, global context that can be used for logging.
Currently, it is possible to obtain a thread-safe context that is not
attached to any blocked client by using `RM_GetThreadSafeContext`.
However, the attached context is not linked to the module identity so
log messages produced are not tagged with the module name.
Ideally we'd fix this in `RM_GetThreadSafeContext` itself but as it
doesn't accept the current context as an argument there's no way to do
that in a backwards compatible manner.
This is essentially the same as calling COMMAND GETKEYS but provides a
more efficient interface that can be used in every context (i.e. not a
Redis command).
Adding [B]LMOVE <src> <dst> RIGHT|LEFT RIGHT|LEFT. deprecating [B]RPOPLPUSH.
Note that when receiving a BRPOPLPUSH we'll still propagate an RPOPLPUSH,
but on BLMOVE RIGHT LEFT we'll propagate an LMOVE
improvement to existing tests
- Replace "after 1000" with "wait_for_condition" when wait for
clients to block/unblock.
- Add a pre-existing element to target list on basic tests so
that we can check if the new element was added to the correct
side of the list.
- check command stats on the replica to make sure the right
command was replicated
Co-authored-by: Oran Agra <oran@redislabs.com>
track and report memory used by clients argv.
this is very usaful in case clients started sending a command and didn't
complete it. in which case the first args of the command are already
trimmed from the query buffer.
in an effort to avoid cache misses and overheads while keeping track of
these, i avoid calling sdsZmallocSize and instead use the sdslen /
bulk-len which can at least give some insight into the problem.
This memory is now added to the total clients memory usage, as well as
the client list.
Add optional GET parameter to SET command in order to set a new value to
a key and retrieve the old key value. With this change we can deprecate
`GETSET` command and use only the SET command with the GET parameter.
PROBLEM:
[$rd1 read] reads invalidation messages one by one, so it's never going to see the second invalidation message produced after INCR b, whether or not it exists. Adding another read will block incase no invalidation message is produced.
FIX:
We switch the order of "INCR a" and "INCR b" - now "INCR b" comes first. We still only read the first invalidation message produces. If an invalidation message is wrongly produces for b - then it will be produced before that of a, since "INCR b" comes before "INCR a".
Co-authored-by: Nitai Caro <caronita@amazon.com>
Before this commit, we would have continued to add replies to the reply buffer even if client
output buffer limit is reached, so the used memory would keep increasing over the configured limit.
What's more, we shouldn’t write any reply to the client if it is set 'CLIENT_CLOSE_ASAP' flag
because that doesn't conform to its definition and we will close all clients flagged with
'CLIENT_CLOSE_ASAP' in ‘beforeSleep’.
Because of code execution order, before this, we may firstly write to part of the replies to
the socket before disconnecting it, but in fact, we may can’t send the full replies to clients
since OS socket buffer is limited. But this unexpected behavior makes some commands work well,
for instance ACL DELUSER, if the client deletes the current user, we need to send reply to client
and close the connection, but before, we close the client firstly and write the reply to reply
buffer. secondly, we shouldn't do this despite the fact it works well in most cases.
We add a flag 'CLIENT_CLOSE_AFTER_COMMAND' to mark clients, this flag means we will close the
client after executing commands and send all entire replies, so that we can write replies to
reply buffer during executing commands, send replies to clients, and close them later.
We also fix some implicit problems. If client output buffer limit is enforced in 'multi/exec',
all commands will be executed completely in redis and clients will not read any reply instead of
partial replies. Even more, if the client executes 'ACL deluser' the using user in 'multi/exec',
it will not read the replies after 'ACL deluser' just like before executing 'client kill' itself
in 'multi/exec'.
We added some tests for output buffer limit breach during multi-exec and using a pipeline of
many small commands rather than one with big response.
Co-authored-by: Oran Agra <oran@redislabs.com>
XREADGROUP auto-creates the consumer inside the consumer group the
first time it saw it.
When XREADGROUP is being used with NOACK option, the message will not
be added into the client's PEL and XGROUP SETID would be propagated.
When the replica gets the XGROUP SETID it will only update the last delivered
id of the group, but will not create the consumer.
So, in this commit XGROUP CREATECONSUMER is being added.
Command pattern: XGROUP CREATECONSUMER <key> <group> <consumer>.
When NOACK option is being used, createconsumer command would be
propagated as well.
In case of AOFREWRITE, consumer with an empty PEL would be saved with
XGROUP CREATECONSUMER whereas consumer with pending entries would be
saved with XCLAIM
We're already using bg_unlink in several places to delete the rdb file in the background,
and avoid paying the cost of the deletion from our main thread.
This commit uses bg_unlink to remove the temporary rdb file in the background too.
However, in case we delete that rdb file just before exiting, we don't actually wait for the
background thread or the main thread to delete it, and just let the OS clean up after us.
i.e. we open the file, unlink it and exit with the fd still open.
Furthermore, rdbRemoveTempFile can be called from a thread and was using snprintf which is
not async-signal-safe, we now use ll2string instead.
This test was nearly always failing on MacOS github actions.
This is because of bugs in the test that caused it to nearly always run
all 3 attempts and just look at the last one as the pass/fail creteria.
i.e. the test was nearly always running all 3 attempts and still sometimes
succeed. this is because the break condition was different than the test
completion condition.
The reason the test succeeded is because the break condition tested the
results of all 3 tests (PSETEX/PEXPIRE/PEXPIREAT), but the success check
at the end was only testing the result of PSETEX.
The reason the PEXPIREAT test nearly always failed is because it was
getting the current time wrong: getting the current second and loosing
the sub-section time, so the only chance for it to succeed is if it run
right when a certain second started.
Because i now get the time from redis, adding another round trip, i
added another 100ms to the PEXPIRE test to make it less fragile, and
also added many more attempts.
Adding many more attempts before failure to account for slow platforms,
github actions and valgrind
This is a catch-all test to confirm that that rewrite produces a valid
output for all parameters and that this process does not introduce
undesired configuration changes.
Save parameters should either be default or whatever specified in the
config file. This fixes an issue introduced in #7092 which causes
configuration file settings to be applied on top of the defaults.
Starting redis 6.0 and the changes we made to the diskless master to be
suitable for TLS, I made the master avoid reaping (wait3) the pid of the
child until we know all replicas are done reading their rdb.
I did that in order to avoid a state where the rdb_child_pid is -1 but
we don't yet want to start another fork (still busy serving that data to
replicas).
It turns out that the solution used so far was problematic in case the
fork child was being killed (e.g. by the kernel OOM killer), in that
case there's a chance that we currently disabled the read event on the
rdb pipe, since we're waiting for a replica to become writable again.
and in that scenario the master would have never realized the child
exited, and the replica will remain hung too.
Note that there's no mechanism to detect a hung replica while it's in
rdb transfer state.
The solution here is to add another pipe which is used by the parent to
tell the child it is safe to exit. this mean that when the child exits,
for whatever reason, it is safe to reap it.
Besides that, i'm re-introducing an adjustment to REPLCONF ACK which was
part of #6271 (Accelerate diskless master connections) but was dropped
when that PR was rebased after the TLS fork/pipe changes (5a47794).
Now that RdbPipeCleanup no longer calls checkChildrenDone, and the ACK
has chance to detect that the child exited, it should be the one to call
it so that we don't have to wait for cron (server.hz) to do that.
During long running scripts or loading RDB/AOF, we may need to do some
defragging. Since processEventsWhileBlocked is called periodically at
unknown intervals, and many cron jobs either depend on run_with_period
(including active defrag), or rely on being called at server.hz rate
(i.e. active defrag knows ho much time to run by looking at server.hz),
the whileBlockedCron may have to run a loop triggering the cron jobs in it
(currently only active defrag) several times.
Other changes:
- Adding a test for defrag during aof loading.
- Changing key-load-delay config to take negative values for fractions
of a microsecond sleep
If the server gets MULTI command followed by only read
commands, and right before it gets the EXEC it reaches OOM,
the client will get OOM response.
So, from now on, it will get OOM response only if there was
at least one command that was tagged with `use-memory` flag
When calling to LPOS command when RANK is higher than matches,
the return value is non valid response. For example:
```
LPUSH l a
:1
LPOS l b RANK 5 COUNT 10
*-4
```
It may break client-side parser.
Now, we count how many replies were replied in the array.
```
LPUSH l a
:1
LPOS l b RANK 5 COUNT 10
*0
```
Add Linux kernel OOM killer control option.
This adds the ability to control the Linux OOM killer oom_score_adj
parameter for all Redis processes, depending on the process role (i.e.
master, replica, background child).
A oom-score-adj global boolean flag control this feature. In addition,
specific values can be configured using oom-score-adj-values if
additional tuning is required.
This is a rebased version of #3078 originally by shaharmor
with the following patches by TysonAndre made after rebasing
to work with the updated C API:
1. Add 2 more unit tests
(wrong argument count error message, integer over 64 bits)
2. Use addReplyArrayLen instead of addReplyMultiBulkLen.
3. Undo changes to src/help.h - for the ZMSCORE PR,
I heard those should instead be automatically
generated from the redis-doc repo if it gets updated
Motivations:
- Example use case: Client code to efficiently check if each element of a set
of 1000 items is a member of a set of 10 million items.
(Similar to reasons for working on #7593)
- HMGET and ZMSCORE already exist. This may lead to developers deciding
to implement functionality that's best suited to a regular set with a
data type of sorted set or hash map instead, for the multi-get support.
Currently, multi commands or lua scripting to call sismember multiple times
would almost definitely be less efficient than a native smismember
for the following reasons:
- Need to fetch the set from the string every time
instead of reusing the C pointer.
- Using pipelining or multi-commands would result in more bytes sent
and received by the client for the repeated SISMEMBER KEY sections.
- Need to specially encode the data and decode it from the client
for lua-based solutions.
- Proposed solutions using Lua or SADD/SDIFF could trigger writes to
memory, which is undesirable on a redis replica server
or when commands get replicated to replicas.
Co-Authored-By: Shahar Mor <shahar@peer5.com>
Co-Authored-By: Tyson Andre <tysonandre775@hotmail.com>
Added RedisModule_HoldString that either returns a
shallow copy of the given String (by increasing
the String ref count) or a new deep copy of String
in case its not possible to get a shallow copy.
Co-authored-by: Itamar Haber <itamar@redislabs.com>
Diskless master has some inherent latencies.
1) fork starts with delay from cron rather than immediately
2) replica is put online only after an ACK. but the ACK
was sent only once a second.
3) but even if it would arrive immediately, it will not
register in case cron didn't yet detect that the fork is done.
Besides that, when a replica disconnects, it doesn't immediately
attempts to re-connect, it waits for replication cron (one per second).
in case it was already online, it may be important to try to re-connect
as soon as possible, so that the backlog at the master doesn't vanish.
In case it disconnected during rdb transfer, one can argue that it's
not very important to re-connect immediately, but this is needed for the
"diskless loading short read" test to be able to run 100 iterations in 5
seconds, rather than 3 (waiting for replication cron re-connection)
changes in this commit:
1) sync command starts a fork immediately if no sync_delay is configured
2) replica sends REPLCONF ACK when done reading the rdb (rather than on 1s cron)
3) when a replica unexpectedly disconnets, it immediately tries to
re-connect rather than waiting 1s
4) when when a child exits, if there is another replica waiting, we spawn a new
one right away, instead of waiting for 1s replicationCron.
5) added a call to connectWithMaster from replicationSetMaster. which is called
from the REPLICAOF command but also in 3 places in cluster.c, in all of
these the connection attempt will now be immediate instead of delayed by 1
second.
side note:
we can add a call to rdbPipeReadHandler in replconfCommand when getting
a REPLCONF ACK from the replica to solve a race where the replica got
the entire rdb and EOF marker before we detected that the pipe was
closed.
in the test i did see this race happens in one about of some 300 runs,
but i concluded that this race is unlikely in real life (where the
replica is on another host and we're more likely to first detect the
pipe was closed.
the test runs 100 iterations in 3 seconds, so in some cases it'll take 4
seconds instead (waiting for another REPLCONF ACK).
Removing unneeded startBgsaveForReplication from updateSlavesWaitingForBgsave
Now that CheckChildrenDone is calling the new replicationStartPendingFork
(extracted from serverCron) there's actually no need to call
startBgsaveForReplication from updateSlavesWaitingForBgsave anymore,
since as soon as updateSlavesWaitingForBgsave returns, CheckChildrenDone is
calling replicationStartPendingFork that handles that anyway.
The code in updateSlavesWaitingForBgsave had a bug in which it ignored
repl-diskless-sync-delay, but removing that code shows that this bug was
hiding another bug, which is that the max_idle should have used >= and
not >, this one second delay has a big impact on my new test.
Syntax: `ZMSCORE KEY MEMBER [MEMBER ...]`
This is an extension of #2359
amended by Tyson Andre to work with the changed unstable API,
add more tests, and consistently return an array.
- It seemed as if it would be more likely to get reviewed
after updating the implementation.
Currently, multi commands or lua scripting to call zscore multiple times
would almost definitely be less efficient than a native ZMSCORE
for the following reasons:
- Need to fetch the set from the string every time instead of reusing the C
pointer.
- Using pipelining or multi-commands would result in more bytes sent by
the client for the repeated `ZMSCORE KEY` sections.
- Need to specially encode the data and decode it from the client
for lua-based solutions.
- The fastest solution I've seen for large sets(thousands or millions)
involves lua and a variadic ZADD, then a ZINTERSECT, then a ZRANGE 0 -1,
then UNLINK of a temporary set (or lua). This is still inefficient.
Co-authored-by: Tyson Andre <tysonandre775@hotmail.com>
- the test now waits for specific set of log messages rather than wait for
timeout looking for just one message.
- we don't wanna sample the current length of the log after an action, due
to a race, we need to start the search from the line number of the last
message we where waiting for.
- when attempting to trigger a full sync, use multi-exec to avoid a race
where the replica manages to re-connect before we completed the set of
actions that should force a full sync.
- fix verify_log_message which was broken and unused
interestingly the latency monitor test fails because valgrind is slow
enough so that the time inside PEXPIREAT command from the moment of
the first mstime() call to get the basetime until checkAlreadyExpired
calls mstime() again is more than 1ms, and that test was too sensitive.
using this opportunity to speed up the test (unrelated to the failure)
the fix is just the longer time passed to PEXPIRE.
Similarly to EXPIREAT with TTL in the past, which implicitly deletes the
key and return success, RESTORE should not store key that are already
expired into the db.
When used together with REPLACE it should emit a DEL to keyspace
notification and replication stream.
On some platforms strtold("+inf") with valgrind returns a non-inf result
[err]: INCRBYFLOAT does not allow NaN or Infinity in tests/unit/type/incr.tcl
Expected 'ERR*would produce*' to equal or match '1189731495357231765085759.....'
tests were sensitive to additional log lines appearing in the log
causing the search to come empty handed.
instead of just looking for the n last log lines, capture the log lines
before performing the action, and then search from that offset.
In order to support the use of multi-exec in pipeline, it is important that
MULTI and EXEC are never rejected and it is easy for the client to know if the
connection is still in multi state.
It was easy to make sure MULTI and DISCARD never fail (done by previous
commits) since these only change the client state and don't do any actual
change in the server, but EXEC is a different story.
Since in the past, it was possible for clients to handle some EXEC errors and
retry the EXEC, we now can't affort to return any error on EXEC other than
EXECABORT, which now carries with it the real reason for the abort too.
Other fixes in this commit:
- Some checks that where performed at the time of queuing need to be re-
validated when EXEC runs, for instance if the transaction contains writes
commands, it needs to be aborted. there was one check that was already done
in execCommand (-READONLY), but other checks where missing: -OOM, -MISCONF,
-NOREPLICAS, -MASTERDOWN
- When a command is rejected by processCommand it was rejected with addReply,
which was not recognized as an error in case the bad command came from the
master. this will enable to count or MONITOR these errors in the future.
- make it easier for tests to create additional (non deferred) clients.
- add tests for the fixes of this commit.
The scan key module API provides the scan callback with the current
field name and value (if it exists). Those arguments are RedisModuleString*
which means it supposes to point to robj which is encoded as a string.
Using createStringObjectFromLongLong function might return robj that
points to an integer and so break a module that tries for example to
use RedisModule_StringPtrLen on the given field/value.
The PR introduces a fix that uses the createObject function and sdsfromlonglong function.
Using those function promise that the field and value pass to the to the
scan callback will be Strings.
The PR also changes the Scan test module to use RedisModule_StringPtrLen
to catch the issue. without this, the issue is hidden because
RedisModule_ReplyWithString knows to handle integer encoding of the
given robj (RedisModuleString).
The PR also introduces a new test to verify the issue is solved.
apparently when running tests in parallel (the default of --clients 16),
there's a chance for two tests to use the same port.
specifically, one test might shutdown a master and still have the
replica up, and then another test will re-use the port number of master
for another master, and then that replica will connect to the master of
the other test.
this can cause a master to count too many full syncs and fail a test if
we run the tests with --single integration/psync2 --loop --stop
see Probmem 2 in #7314
There's a rare case which leads to stagnation in the defragger, causing
it to keep scanning the keyspace and do nothing (not moving any
allocation), this happens when all the allocator slabs of a certain bin
have the same % utilization, but the slab from which new allocations are
made have a lower utilization.
this commit fixes it by removing the current slab from the overall
average utilization of the bin, and also eliminate any precision loss in
the utilization calculation and move the decision about the defrag to
reside inside jemalloc.
and also add a test that consistently reproduce this issue.
Seems like on some systems choosing specific TLS v1/v1.1 versions no
longer works as expected. Test is reduced for v1.2 now which is still
good enough to test the mechansim, and matters most anyway.
Currently, there are several types of threads/child processes of a
redis server. Sometimes we need deeply optimise the performance of
redis, so we would like to isolate threads/processes.
There were some discussion about cpu affinity cases in the issue:
https://github.com/antirez/redis/issues/2863
So implement cpu affinity setting by redis.conf in this patch, then
we can config server_cpulist/bio_cpulist/aof_rewrite_cpulist/
bgsave_cpulist by cpu list.
Examples of cpulist in redis.conf:
server_cpulist 0-7:2 means cpu affinity 0,2,4,6
bio_cpulist 1,3 means cpu affinity 1,3
aof_rewrite_cpulist 8-11 means cpu affinity 8,9,10,11
bgsave_cpulist 1,10-11 means cpu affinity 1,10,11
Test on linux/freebsd, both work fine.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
STRALGO should be a container for mostly read-only string
algorithms in Redis. The algorithms should have two main
characteristics:
1. They should be non trivial to compute, and often not part of
programming language standard libraries.
2. They should be fast enough that it is a good idea to have optimized C
implementations.
Next thing I would love to see? A small strings compression algorithm.
this test is time sensitive and it sometimes fail to pass below the
latency threshold, even on strong machines.
this test was the reson we're running just 2 parallel tests in the
github actions CI, revering this.
There is an inherent race between the deferring client and the
"main" client of the test: While the deferring client issues a blocking
command, we can't know for sure that by the time the "main" client
tries to issue another command (Usually one that unblocks the deferring
client) the deferring client is even blocked...
For lack of a better choice this commit uses TCL's 'after' in order
to give some time for the deferring client to issues its blocking
command before the "main" client does its thing.
This problem probably exists in many other tests but this commit
tries to fix blockonkeys.tcl
By using a "circular BRPOPLPUSH"-like scenario it was
possible the get the same client on db->blocking_keys
twice (See comment in moduleTryServeClientBlockedOnKey)
The fix was actually already implememnted in
moduleTryServeClientBlockedOnKey but it had a bug:
the funxction should return 0 or 1 (not OK or ERR)
Other changes:
1. Added two commands to blockonkeys.c test module (To
reproduce the case described above)
2. Simplify blockonkeys.c in order to make testing easier
3. cast raxSize() to avoid warning with format spec
Makse sure call() doesn't wrap replicated commands with
a redundant MULTI/EXEC
Other, unrelated changes:
1. Formatting compiler warning in INFO CLIENTS
2. Use CLIENT_ID_AOF instead of UINT64_MAX
