Background:
Redis 6.2 added ACL control for pubsub channels (#7993), which were supposed
to be permissive by default to retain compatibility with redis 6.0 ACL.
But due to a bug, only newly created users got this `acl-pubsub-default` applied,
while overwritten (updated) users got reset to `resetchannels` (denied).
Since the "default" user exists before loading the config file,
any ACL change to it, results in an update / overwrite.
So when a "default" user is loaded from config file or include ACL
file with no channels related rules, the user will not have any
permissions to any channels. But other users will have default
permissions to any channels.
When upgraded from 6.0 with config rewrite, this will lead to
"default" user channels permissions lost.
When users are loaded from include file, then call "acl load", users
will also lost channels permissions.
Similarly, the `reset` ACL rule, would have reset the user to be denied
access to any channels, ignoring `acl-pubsub-default` and breaking
compatibility with redis 6.0.
The implication of this fix is that it regains compatibility with redis 6.0,
but breaks compatibility with redis 6.2.0 and 2.0.1. e.g. after the upgrade,
the default user will regain access to pubsub channels.
Other changes:
Additionally this commit rename server.acl_pubusub_default to
server.acl_pubsub_default and fix typo in acl tests.
Previously (and by default after commit) when master loose its last slot
(due to migration, for example), its replicas will migrate to new last slot
holder.
There are cases where this is not desired:
* Consolidation that results with removed nodes (including the replica, eventually).
* Manually configured cluster topologies, which the admin wishes to preserve.
Needlessly migrating a replica triggers a full synchronization and can have a negative impact, so
we prefer to be able to avoid it where possible.
This commit adds 'cluster-allow-replica-migration' configuration option that is
enabled by default to preserve existed behavior. When disabled, replicas will
not be auto-migrated.
Fixes#4896
Co-authored-by: Oran Agra <oran@redislabs.com>
The 'sentinel replicas <master>' command will ignore replicas with
`replica-announced` set to no.
The goal of disabling the config setting replica-announced is to allow ghost
replicas. The replica is in the cluster, synchronize with its master, can be
promoted to master and is not exposed to sentinel clients. This way, it is
acting as a live backup or living ghost.
In addition, to prevent the replica to be promoted as master, set
replica-priority to 0.
The cluster bus is established over TLS or non-TLS depending on the configuration tls-cluster. The client ports distributed in the cluster and sent to clients are assumed to be TLS or non-TLS also depending on tls-cluster.
The cluster bus is now extended to also contain the non-TLS port of clients in a TLS cluster, when available. The non-TLS port of a cluster node, when available, is sent to clients connected without TLS in responses to CLUSTER SLOTS, CLUSTER NODES, CLUSTER SLAVES and MOVED and ASK redirects, instead of the TLS port.
The user was able to override the client port by defining cluster-announce-port. Now cluster-announce-tls-port is added, so the user can define an alternative announce port for both TLS and non-TLS clients.
Fixes#8134
the bug was also discussed in #8716, and was solved in #8719, but incompletely:
when the server is started, and the save option is default, if you issue the " config set save "" "
to change the save option, and then issue the “config rewrite” command, the " save "" " won't be saved.
Add ability to modify port, tls-port and bind configurations by CONFIG SET command.
To simplify the code and make it cleaner, a new structure
added, socketFds, which contains the file descriptors array and its counter,
and used for TCP, TLS and Cluster sockets file descriptors.
On 32-bit systems, setting the proto-max-bulk-len config parameter to a high value may result with integer overflow and a subsequent heap overflow when parsing an input bulk (CVE-2021-21309).
This fix has two parts:
Set a reasonable limit to the config parameter.
Add additional checks to prevent the problem in other potential but unknown code paths.
if option `set-proc-title' is no, then do nothing for proc title.
The reason has been explained long ago, see following:
We update redis to 2.8.8, then found there are some side effect when
redis always change the process title.
We run several slave instance on one computer, and all these salves
listen on unix socket only, then ps will show:
1 S redis 18036 1 0 80 0 - 56130 ep_pol 14:02 ? 00:00:31 /usr/sbin/redis-server *:0
1 S redis 23949 1 0 80 0 - 11074 ep_pol 15:41 ? 00:00:00 /usr/sbin/redis-server *:0
for redis 2.6 the output of ps is like following:
1 S redis 18036 1 0 80 0 - 56130 ep_pol 14:02 ? 00:00:31 /usr/sbin/redis-server /etc/redis/a.conf
1 S redis 23949 1 0 80 0 - 11074 ep_pol 15:41 ? 00:00:00 /usr/sbin/redis-server /etc/redis/b.conf
Later is more informational in our case. The situation
is worse when we manage the config and process running
state by salt. Salt check the process by running "ps |
grep SIG" (for Gentoo System) to check the running
state, where SIG is the string to search for when
looking for the service process with ps. Previously, we
define sig as "/usr/sbin/redis-server
/etc/redis/a.conf". Since the ps output is identical for
our case, so we have no way to check the state of
specified redis instance.
So, for our case, we prefer the old behavior, i.e, do
not change the process title for the main redis process.
Or add an option such as "set-proc-title [yes|no]" to
control this behavior.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
This commit fixes a well known and an annoying issue in Sentinel mode.
Cause of this issue:
Currently, Redis rewrite process works well in server mode, however in sentinel mode,
the sentinel config has variant semantics for different configurations, in example configuration
https://github.com/redis/redis/blob/unstable/sentinel.conf, we put comments on these.
However the rewrite process only treat the sentinel config as a single option. During rewrite
process, it will mess up with the lines and comments.
Approaches:
In order to solve this issue, we need to differentiate different subconfig options in sentinel separately,
for example, sentinel monitor <master-name> <ip> <redis-port> <quorum>
we can treat it as sentinel monitor option, instead of the sentinel option.
This commit also fixes the dependency issue when putting configurations in sentinel.conf.
For example before this commit,we must put
`sentinel monitor <master-name> <ip> <redis-port> <quorum>` before
`sentinel auth-pass <master-name> <password>` for a single master,
otherwise the server cannot start and will return error. This commit fixes this issue, as long as
the monitoring master was configured, no matter the sequence is, the sentinel can start and run properly.
Fixes a regression introduced due to a new (safer) way of rewriting configuration files. In the past the file was simply overwritten (same inode), but now Redis creates a new temporary file and later renames it over the old one.
The temp file typically gets created with 0600 permissions so we later fchmod it to fix that. Unlike open with O_CREAT, fchmod doesn't consider umask so we have to do that explicitly.
Fixes#8369
* Adds ASYNC and SYNC arguments to SCRIPT FLUSH
* Adds SYNC argument to FLUSHDB and FLUSHALL
* Adds new config to control the default behavior of FLUSHDB, FLUSHALL and SCRIPT FLUASH.
the new behavior is as follows:
* FLUSH[ALL|DB],SCRIPT FLUSH: Determine sync or async according to the
value of lazyfree-lazy-user-flush.
* FLUSH[ALL|DB],SCRIPT FLUSH ASYNC: Always flushes the database in an async manner.
* FLUSH[ALL|DB],SCRIPT FLUSH SYNC: Always flushes the database in a sync manner.
Older arm64 Linux kernels have a bug that could lead to data corruption during
background save under the following scenario:
1) jemalloc uses MADV_FREE on a page,
2) jemalloc reuses and writes the page,
3) Redis forks the background save process, and
4) Linux performs page reclamation.
Under these conditions, Linux will reclaim the page wrongfully and the
background save process will read zeros when it tries to read the page.
The bug has been fixed in Linux with commit:
ff1712f953e27f0b0718762ec17d0adb15c9fd0b ("arm64: pgtable: Ensure dirty bit is
preserved across pte_wrprotect()")
This Commit adds an ignore-warnings config, when not found, redis will
print a warning and exit on startup (default behavior).
Co-authored-by: Oran Agra <oran@redislabs.com>
* man-like consistent long formatting
* Uppercases commands, subcommands and options
* Adds 'HELP' to HELP for all
* Lexicographical order
* Uses value notation and other .md likeness
* Moves const char *help to top
* Keeps it under 80 chars
* Misc help typos, consistent conjuctioning (i.e return and not returns)
* Uses addReplySubcommandSyntaxError(c) all over
Signed-off-by: Itamar Haber <itamar@redislabs.com>
This Commit pushes forward the observability on overall error statistics and command statistics within redis-server:
It extends INFO COMMANDSTATS to have
- failed_calls in - so we can keep track of errors that happen from the command itself, broken by command.
- rejected_calls - so we can keep track of errors that were triggered outside the commmand processing per se
Adds a new section to INFO, named ERRORSTATS that enables keeping track of the different errors that
occur within redis ( within processCommand and call ) based on the reply Error Prefix ( The first word
after the "-", up to the first space ).
This commit also fixes RM_ReplyWithError so that it can be correctly identified as an error reply.
* Allow runtest-moduleapi use a different 'make', for systems where GNU Make is 'gmake'.
* Fix issue with builds on Solaris re-building everything from scratch due to CFLAGS/LDFLAGS not stored.
* Fix compile failure on Solaris due to atomicvar and a bunch of warnings.
* Fix garbled log timestamps on Solaris.
This adds a new `tls-client-cert-file` and `tls-client-key-file`
configuration directives which make it possible to use different
certificates for the TLS-server and TLS-client functions of Redis.
This is an optional directive. If it is not specified the `tls-cert-file`
and `tls-key-file` directives are used for TLS client functions as well.
Also, `utils/gen-test-certs.sh` now creates additional server-only and client-only certs and will skip intensive operations if target files already exist.
When loading an encoded payload we will at least do a shallow validation to
check that the size that's encoded in the payload matches the size of the
allocation.
This let's us later use this encoded size to make sure the various offsets
inside encoded payload don't reach outside the allocation, if they do, we'll
assert/panic, but at least we won't segfault or smear memory.
We can also do 'deep' validation which runs on all the records of the encoded
payload and validates that they don't contain invalid offsets. This lets us
detect corruptions early and reject a RESTORE command rather than accepting
it and asserting (crashing) later when accessing that payload via some command.
configuration:
- adding ACL flag skip-sanitize-payload
- adding config sanitize-dump-payload [yes/no/clients]
For now, we don't have a good way to ensure MIGRATE in cluster resharding isn't
being slowed down by these sanitation, so i'm setting the default value to `no`,
but later on it should be set to `clients` by default.
changes:
- changing rdbReportError not to `exit` in RESTORE command
- adding a new stat to be able to later check if cluster MIGRATE isn't being
slowed down by sanitation.
As we know, redis may reject user's requests or evict some keys if
used memory is over maxmemory. Dictionaries expanding may make
things worse, some big dictionaries, such as main db and expires dict,
may eat huge memory at once for allocating a new big hash table and be
far more than maxmemory after expanding.
There are related issues: #4213#4583
More details, when expand dict in redis, we will allocate a new big
ht[1] that generally is double of ht[0], The size of ht[1] will be
very big if ht[0] already is big. For db dict, if we have more than
64 million keys, we need to cost 1GB for ht[1] when dict expands.
If the sum of used memory and new hash table of dict needed exceeds
maxmemory, we shouldn't allow the dict to expand. Because, if we
enable keys eviction, we still couldn't add much more keys after
eviction and rehashing, what's worse, redis will keep less keys when
redis only remains a little memory for storing new hash table instead
of users' data. Moreover users can't write data in redis if disable
keys eviction.
What this commit changed ?
Add a new member function expandAllowed for dict type, it provide a way
for caller to allow expand or not. We expose two parameters for this
function: more memory needed for expanding and dict current load factor,
users can implement a function to make a decision by them.
For main db dict and expires dict type, these dictionaries may be very
big and cost huge memory for expanding, so we implement a judgement
function: we can stop dict to expand provisionally if used memory will
be over maxmemory after dict expands, but to guarantee the performance
of redis, we still allow dict to expand if dict load factor exceeds the
safe load factor.
Add test cases to verify we don't allow main db to expand when left
memory is not enough, so that avoid keys eviction.
Other changes:
For new hash table size when expand. Before this commit, the size is
that double used of dict and later _dictNextPower. Actually we aim to
control a dict load factor between 0.5 and 1.0. Now we replace *2 with
+1, since the first check is that used >= size, the outcome of before
will usually be the same as _dictNextPower(used+1). The only case where
it'll differ is when dict_can_resize is false during fork, so that later
the _dictNextPower(used*2) will cause the dict to jump to *4 (i.e.
_dictNextPower(1025*2) will return 4096).
Fix rehash test cases due to changing algorithm of new hash table size
when expand.
Fixes#7923.
This PR appropriates the special `&` symbol (because `@` and `*` are taken),
followed by a literal value or pattern for describing the Pub/Sub patterns that
an ACL user can interact with. It is similar to the existing key patterns
mechanism in function (additive) and implementation (copy-pasta). It also adds
the allchannels and resetchannels ACL keywords, naturally.
The default user is given allchannels permissions, whereas new users get
whatever is defined by the acl-pubsub-default configuration directive. For
backward compatibility in 6.2, the default of this directive is allchannels but
this is likely to be changed to resetchannels in the next major version for
stronger default security settings.
Unless allchannels is set for the user, channel access permissions are checked
as follows :
* Calls to both PUBLISH and SUBSCRIBE will fail unless a pattern matching the
argumentative channel name(s) exists for the user.
* Calls to PSUBSCRIBE will fail unless the pattern(s) provided as an argument
literally exist(s) in the user's list.
Such failures are logged to the ACL log.
Runtime changes to channel permissions for a user with existing subscribing
clients cause said clients to disconnect unless the new permissions permit the
connections to continue. Note, however, that PSUBSCRIBErs' patterns are matched
literally, so given the change bar:* -> b*, pattern subscribers to bar:* will be
disconnected.
Notes/questions:
* UNSUBSCRIBE, PUNSUBSCRIBE and PUBSUB remain unprotected due to lack of reasons
for touching them.
Fix: When oom-score-adj-values is provided in the config file after
oom-score-adj yes, it'll take an immediate action, before
readOOMScoreAdj was acquired, resulting in an error (out of range score
due to uninitialized value. delay the reaction the real call is made by
main().
Since the values are clamped to -1000..1000, and they're
applied as an offset from the value at startup (which may be -1000), we
need to allow the offsets to reach to +2000 so that a value of +1000 is
achievable in case the value at startup was -1000.
Adding an option for absolute values rather than relative ones.
In case redis starts and find that THP is enabled ("always"), instead
of printing a log message, which might go unnoticed, redis will try to
disable it (just for the redis process).
Note: it looks like on self-bulit kernels THP is likely be set to "always" by default.
Some discuss about THP side effect on Linux:
according to http://www.antirez.com/news/84, we can see that
redis latency spikes are caused by linux kernel THP feature.
I have tested on E3-2650 v3, and found that 2M huge page costs
about 0.25ms to fix COW page fault.
Add a new config 'disable-thp', the recommended setting is 'yes',
(default) the redis tries to disable THP by prctl syscall. But
users who really want THP can set it to "no"
Thanks to Oran & Yossi for suggestions.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Previous code would have added default redis save parameters
to the config file on rewrite, which would have been silently ignored
when the config file is loaded.
The new code avoids adding this, and also actively removes these lines
If added by a previous config rewrite.
This is a compatibility issue with redis 5.0 that was introduced by ACL.
Before this commit, setting requirepass to an empty string will result
in a server that needs an empty AUTH, unlike redis 5.0 which would
accept connections without an AUTH.
This allows supplying secret configuration (for example - masterauth) via a secure channel
instead of having it in a plaintext file / command line param, while still allowing for most
of the configuration to reside there.
Also, remove 'special' case handling for --check-rdb which hasn't been relevant
since 4.0.0.
when slaveof config is "no one", reset any pre-existing config and resume.
also solve a memory leak if slaveof appears twice.
and fail loading if port number is out of range or not an integer.
Co-authored-by: caozhengbin <caozb@yidingyun.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
Make sure we handle short writes correctly, sync to disk after writing and use
rename to make sure the replacement is actually atomic.
In any case of failure old configuration will remain in place.
Also, add some additional logging to make it easier to diagnose rewrite problems.
Rather than blindly evicting until maxmemory limit is achieved, this
update adds a time limit to eviction. While over the maxmemory limit,
eviction will process before each command AND as a timeProc when no
commands are running.
This will reduce the latency impact on many cases, especially pathological
cases like massive used memory increase during dict rehashing.
There is a risk that some other edge cases (like massive pipelined use
of MGET) could cause Redis memory usage to keep growing despite the
eviction attempts, so a new maxmemory-eviction-tenacity config is
introduced to let users mitigate that.
This is a catch-all test to confirm that that rewrite produces a valid
output for all parameters and that this process does not introduce
undesired configuration changes.
Save parameters should either be default or whatever specified in the
config file. This fixes an issue introduced in #7092 which causes
configuration file settings to be applied on top of the defaults.
During long running scripts or loading RDB/AOF, we may need to do some
defragging. Since processEventsWhileBlocked is called periodically at
unknown intervals, and many cron jobs either depend on run_with_period
(including active defrag), or rely on being called at server.hz rate
(i.e. active defrag knows ho much time to run by looking at server.hz),
the whileBlockedCron may have to run a loop triggering the cron jobs in it
(currently only active defrag) several times.
Other changes:
- Adding a test for defrag during aof loading.
- Changing key-load-delay config to take negative values for fractions
of a microsecond sleep
Avoid re-configuring (and validating) SSL/TLS configuration on `CONFIG
SET` when TLS is not actively enabled for incoming connections, cluster
bus or replication.
This fixes failures when tests run without `--tls` on binaries that were
built with TLS support.
An additional benefit is that it's now possible to perform a multi-step
configuration process while TLS is disabled. The new configuration will
be verified and applied only when TLS is effectively enabled.
Add Linux kernel OOM killer control option.
This adds the ability to control the Linux OOM killer oom_score_adj
parameter for all Redis processes, depending on the process role (i.e.
master, replica, background child).
A oom-score-adj global boolean flag control this feature. In addition,
specific values can be configured using oom-score-adj-values if
additional tuning is required.
This makes it possible to add tests that generate assertions, and run
them with valgrind, making sure that there are no memory violations
prior to the assertion.
New config options:
- crash-log-enabled - can be disabled for cleaner core dumps
- crash-memcheck-enabled - useful for faster termination after a crash
- use-exit-on-panic - to be used by the test suite so that valgrind can
detect leaks and memory corruptions
Other changes:
- Crash log is printed even on system that dont HAVE_BACKTRACE, i.e. in
both SIGSEGV and assert / panic
- Assertion and panic won't print registers and code around EIP (which
was useless), but will do fast memory test (which may still indicate
that the assertion was due to memory corrpution)
I had to reshuffle code in order to re-use it, so i extracted come code
into function without actually doing any changes to the code:
- logServerInfo
- logModulesInfo
- doFastMemoryTest (with the exception of it being conditional)
- dumpCodeAroundEIP
changes to the crash report on segfault:
- logRegisters is called right after the stack trace (before info) done
just in order to have more re-usable code
- stack trace skips the first two items on the stack (the crash log and
signal handler functions)
