Allow running blocking commands from within a module using `RM_Call`.
Today, when `RM_Call` is used, the fake client that is used to run command
is marked with `CLIENT_DENY_BLOCKING` flag. This flag tells the command
that it is not allowed to block the client and in case it needs to block, it must
fallback to some alternative (either return error or perform some default behavior).
For example, `BLPOP` fallback to simple `LPOP` if it is not allowed to block.
All the commands must respect the `CLIENT_DENY_BLOCKING` flag (including
module commands). When the command invocation finished, Redis asserts that
the client was not blocked.
This PR introduces the ability to call blocking command using `RM_Call` by
passing a callback that will be called when the client will get unblocked.
In order to do that, the user must explicitly say that he allow to perform blocking
command by passing a new format specifier argument, `K`, to the `RM_Call`
function. This new flag will tell Redis that it is allow to run blocking command
and block the client. In case the command got blocked, Redis will return a new
type of call reply (`REDISMODULE_REPLY_PROMISE`). This call reply indicates
that the command got blocked and the user can set the on_unblocked handler using
`RM_CallReplyPromiseSetUnblockHandler`.
When clients gets unblocked, it eventually reaches `processUnblockedClients` function.
This is where we check if the client is a fake module client and if it is, we call the unblock
callback instead of performing the usual unblock operations.
**Notice**: `RM_CallReplyPromiseSetUnblockHandler` must be called atomically
along side the command invocation (without releasing the Redis lock in between).
In addition, unlike other CallReply types, the promise call reply must be released
by the module when the Redis GIL is acquired.
The module can abort the execution on the blocking command (if it was not yet
executed) using `RM_CallReplyPromiseAbort`. the API will return `REDISMODULE_OK`
on success and `REDISMODULE_ERR` if the operation is already executed.
**Notice** that in case of misbehave module, Abort might finished successfully but the
operation will not really be aborted. This can only happened if the module do not respect
the disconnect callback of the blocked client.
For pure Redis commands this can not happened.
### Atomicity Guarantees
The API promise that the unblock handler will run atomically as an execution unit.
This means that all the operation performed on the unblock handler will be wrapped
with a multi exec transaction when replicated to the replica and AOF.
The API **do not** grantee any other atomicity properties such as when the unblock
handler will be called. This gives us the flexibility to strengthen the grantees (or not)
in the future if we will decide that we need a better guarantees.
That said, the implementation **does** provide a better guarantees when performing
pure Redis blocking command like `BLPOP`. In this case the unblock handler will run
atomically with the operation that got unblocked (for example, in case of `BLPOP`, the
unblock handler will run atomically with the `LPOP` operation that run when the command
got unblocked). This is an implementation detail that might be change in the future and the
module writer should not count on that.
### Calling blocking commands while running on script mode (`S`)
`RM_Call` script mode (`S`) was introduced on #0372. It is used for usecases where the
command that was invoked on `RM_Call` comes from a user input and we want to make
sure the user will not run dangerous commands like `shutdown`. Some command, such
as `BLPOP`, are marked with `NO_SCRIPT` flag, which means they will not be allowed on
script mode. Those commands are marked with `NO_SCRIPT` just because they are
blocking commands and not because they are dangerous. Now that we can run blocking
commands on RM_Call, there is no real reason not to allow such commands on script mode.
The underline problem is that the `NO_SCRIPT` flag is abused to also mark some of the
blocking commands (notice that those commands know not to block the client if it is not
allowed to do so, and have a fallback logic to such cases. So even if those commands
were not marked with `NO_SCRIPT` flag, it would not harm Redis, and today we can
already run those commands within multi exec).
In addition, not all blocking commands are marked with `NO_SCRIPT` flag, for example
`blmpop` are not marked and can run from within a script.
Those facts shows that there are some ambiguity about the meaning of the `NO_SCRIPT`
flag, and its not fully clear where it should be use.
The PR suggest that blocking commands should not be marked with `NO_SCRIPT` flag,
those commands should handle `CLIENT_DENY_BLOCKING` flag and only block when
it's safe (like they already does today). To achieve that, the PR removes the `NO_SCRIPT`
flag from the following commands:
* `blmove`
* `blpop`
* `brpop`
* `brpoplpush`
* `bzpopmax`
* `bzpopmin`
* `wait`
This might be considered a breaking change as now, on scripts, instead of getting
`command is not allowed from script` error, the user will get some fallback behavior
base on the command implementation. That said, the change matches the behavior
of scripts and multi exec with respect to those commands and allow running them on
`RM_Call` even when script mode is used.
### Additional RedisModule API and changes
* `RM_BlockClientSetPrivateData` - Set private data on the blocked client without the
need to unblock the client. This allows up to set the promise CallReply as the private
data of the blocked client and abort it if the client gets disconnected.
* `RM_BlockClientGetPrivateData` - Return the current private data set on a blocked client.
We need it so we will have access to this private data on the disconnect callback.
* On RM_Call, the returned reply will be added to the auto memory context only if auto
memory is enabled, this allows us to keep the call reply for longer time then the context
lifetime and does not force an unneeded borrow relationship between the CallReply and
the RedisModuleContext.
The PR fixes 2 issues:
### RM_Call crash on script mode
`RM_Call` can potentially be called from a background thread where `server.current_client`
are not set. In such case we get a crash on `NULL` dereference.
The fix is to check first if `server.current_client` is `NULL`, if it does we should
verify disc errors and readonly replica as we do to any normal clients (no masters nor AOF).
### RM_Call block OOM commands when not needed
Again `RM_Call` can be executed on a background thread using a `ThreadSafeCtx`.
In such case `server.pre_command_oom_state` can be irrelevant and should not be
considered when check OOM state. This cause OOM commands to be blocked when
not necessarily needed.
In such case, check the actual used memory (and not the cached value). Notice that in
order to know if the cached value can be used, we check that the ctx that was used on
the `RM_Call` is a ThreadSafeCtx. Module writer can potentially abuse the API and use
ThreadSafeCtx on the main thread. We consider this as a API miss used.
The PR extends RM_Call with 3 new capabilities using new flags that
are given to RM_Call as part of the `fmt` argument.
It aims to assist modules that are getting a list of commands to be
executed from the user (not hard coded as part of the module logic),
think of a module that implements a new scripting language...
* `S` - Run the command in a script mode, this means that it will raise an
error if a command which are not allowed inside a script (flaged with the
`deny-script` flag) is invoked (like SHUTDOWN). In addition, on script mode,
write commands are not allowed if there is not enough good replicas (as
configured with `min-replicas-to-write`) and/or a disk error happened.
* `W` - no writes mode, Redis will reject any command that is marked with `write`
flag. Again can be useful to modules that implement a new scripting language
and wants to prevent any write commands.
* `E` - Return errors as RedisModuleCallReply. Today the errors that happened
before the command was invoked (like unknown commands or acl error) return
a NULL reply and set errno. This might be missing important information about
the failure and it is also impossible to just pass the error to the user using
RM_ReplyWithCallReply. This new flag allows you to get a RedisModuleCallReply
object with the relevant error message and treat it as if it was an error that was
raised by the command invocation.
Tests were added to verify the new code paths.
In addition small refactoring was done to share some code between modules,
scripts, and `processCommand` function:
1. `getAclErrorMessage` was added to `acl.c` to unified to log message extraction
from the acl result
2. `checkGoodReplicasStatus` was added to `replication.c` to check the status of
good replicas. It is used on `scriptVerifyWriteCommandAllow`, `RM_Call`, and
`processCommand`.
3. `writeCommandsGetDiskErrorMessage` was added to `server.c` to get the error
message on persistence failure. Again it is used on `scriptVerifyWriteCommandAllow`,
`RM_Call`, and `processCommand`.
Some modules might perform a long-running logic in different stages of Redis lifetime, for example:
* command execution
* RDB loading
* thread safe context
During this long-running logic Redis is not responsive.
This PR offers
1. An API to process events while a busy command is running (`RM_Yield`)
2. A new flag (`ALLOW_BUSY`) to mark the commands that should be handled during busy
jobs which can also be used by modules (`allow-busy`)
3. In slow commands and thread safe contexts, this flag will start rejecting commands with -BUSY only
after `busy-reply-threshold`
4. During loading (`rdb_load` callback), it'll process events right away (not wait for `busy-reply-threshold`),
but either way, the processing is throttled to the server hz rate.
5. Allow modules to Yield to redis background tasks, but not to client commands
* rename `script-time-limit` to `busy-reply-threshold` (an alias to the pre-7.0 `lua-time-limit`)
Co-authored-by: Oran Agra <oran@redislabs.com>
Writable replicas now no longer use the values of expired keys. Expired keys are
deleted when lookupKeyWrite() is used, even on a writable replica. Previously,
writable replicas could use the value of an expired key in write commands such
as INCR, SUNIONSTORE, etc..
This commit also sorts out the mess around the functions lookupKeyRead() and
lookupKeyWrite() so they now indicate what we intend to do with the key and
are not affected by the command calling them.
Multi-key commands like SUNIONSTORE, ZUNIONSTORE, COPY and SORT with the
store option now use lookupKeyRead() for the keys they're reading from (which will
not allow reading from logically expired keys).
This commit also fixes a bug where PFCOUNT could return a value of an
expired key.
Test modules commands have their readonly and write flags updated to correctly
reflect their lookups for reading or writing. Modules are not required to
correctly reflect this in their command flags, but this change is made for
consistency since the tests serve as usage examples.
Fixes#6842. Fixes#7475.
Before this commit, module blocked clients did not carry through the original RESP version, resulting with RESP3 clients receiving unexpected RESP2 replies.
Module blocked clients cache the response in a temporary client,
the reply list in this client would be affected by the recent fix
in #7202, but when the reply is later copied into the real client,
it would have bypassed all the checks for output buffer limit, which
would have resulted in both: responding with a partial response to
the client, and also not disconnecting it at all.
Blocking command should not be used with MULTI, LUA, and RM_Call. This is because,
the caller, who executes the command in this context, expects a reply.
Today, LUA and MULTI have a special (and different) treatment to blocking commands:
LUA - Most commands are marked with no-script flag which are checked when executing
and command from LUA, commands that are not marked (like XREAD) verify that their
blocking mode is not used inside LUA (by checking the CLIENT_LUA client flag).
MULTI - Command that is going to block, first verify that the client is not inside
multi (by checking the CLIENT_MULTI client flag). If the client is inside multi, they
return a result which is a match to the empty key with no timeout (for example blpop
inside MULTI will act as lpop)
For modules that perform RM_Call with blocking command, the returned results type is
REDISMODULE_REPLY_UNKNOWN and the caller can not really know what happened.
Disadvantages of the current state are:
No unified approach, LUA, MULTI, and RM_Call, each has a different treatment
Module can not safely execute blocking command (and get reply or error).
Though It is true that modules are not like LUA or MULTI and should be smarter not
to execute blocking commands on RM_Call, sometimes you want to execute a command base
on client input (for example if you create a module that provides a new scripting
language like javascript or python).
While modules (on modules command) can check for REDISMODULE_CTX_FLAGS_LUA or
REDISMODULE_CTX_FLAGS_MULTI to know not to block the client, there is no way to
check if the command came from another module using RM_Call. So there is no way
for a module to know not to block another module RM_Call execution.
This commit adds a way to unify the treatment for blocking clients by introducing
a new CLIENT_DENY_BLOCKING client flag. On LUA, MULTI, and RM_Call the new flag
turned on to signify that the client should not be blocked. A blocking command
verifies that the flag is turned off before blocking. If a blocking command sees
that the CLIENT_DENY_BLOCKING flag is on, it's not blocking and return results
which are matches to empty key with no timeout (as MULTI does today).
The new flag is checked on the following commands:
List blocking commands: BLPOP, BRPOP, BRPOPLPUSH, BLMOVE,
Zset blocking commands: BZPOPMIN, BZPOPMAX
Stream blocking commands: XREAD, XREADGROUP
SUBSCRIBE, PSUBSCRIBE, MONITOR
In addition, the new flag is turned on inside the AOF client, we do not want to
block the AOF client to prevent deadlocks and commands ordering issues (and there
is also an existing assert in the code that verifies it).
To keep backward compatibility on LUA, all the no-script flags on existing commands
were kept untouched. In addition, a LUA special treatment on XREAD and XREADGROUP was kept.
To keep backward compatibility on MULTI (which today allows SUBSCRIBE, and PSUBSCRIBE).
We added a special treatment on those commands to allow executing them on MULTI.
The only backward compatibility issue that this PR introduces is that now MONITOR
is not allowed inside MULTI.
Tests were added to verify blocking commands are not blocking the client on LUA, MULTI,
or RM_Call. Tests were added to verify the module can check for CLIENT_DENY_BLOCKING flag.
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Itamar Haber <itamar@redislabs.com>
* Introduce a new API's: RM_GetContextFlagsAll, and
RM_GetKeyspaceNotificationFlagsAll that will return the
full flags mask of each feature. The module writer can
check base on this value if the Flags he needs are
supported or not.
* For each flag, introduce a new value on redismodule.h,
this value represents the LAST value and should be there
as a reminder to update it when a new value is added,
also it will be used in the code to calculate the full
flags mask (assuming flags are incrementally increasing).
In addition, stated that the module writer should not use
the LAST flag directly and he should use the GetFlagAll API's.
* Introduce a new API: RM_IsSubEventSupported, that returns for a given
event and subevent, whether or not the subevent supported.
* Introduce a new macro RMAPI_FUNC_SUPPORTED(func) that returns whether
or not a function API is supported by comparing it to NULL.
* Introduce a new API: int RM_GetServerVersion();, that will return the
current Redis version in the format 0x00MMmmpp; e.g. 0x00060008;
* Changed unstable version from 999.999.999 to 255.255.255
Co-authored-by: Oran Agra <oran@redislabs.com>
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
